#!/bin/sh
#
# 	License:	GNU General Public License (GPL) 
# 	Support:	linux-ha@lists.linux-ha.org
#	Author: 	Huang Zhen <zhenhltc@cn.ibm.com>
# 	Copyright (c) 	2006 International Business Machines
#
#	Virtual IP Address by RIP2 protocol.
#	This script manages IP alias in different subnet with quagga/ripd.
#	It can add an IP alias, or remove one.
#	
#	The quagga package should be installed to run this RA
#
#	usage: $0 {start|stop|status|monitor|validate-all|meta-data}
#
#	The "start" arg adds an IP alias.
#	Surprisingly, the "stop" arg removes one. :-)
#
#       OCF parameters are as below
#       OCF_RESKEY_ip	The IP address in different subnet
#       OCF_RESKEY_nic	The nic for broadcast the route information
#
#######################################################################
# Initialization:

: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs

RIPDCONF=$HA_RSCTMP/VIPArip-ripd.conf
ZEBRA=/usr/sbin/zebra
RIPD=/usr/sbin/ripd
USAGE="usage: $0 {start|stop|status|monitor|validate-all|meta-data}";

#######################################################################

meta_data() {
cat <<END
<?xml version="1.0"?>
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="VIPArip">
<version>1.0</version>

<longdesc lang="en">
Virtual IP Address by RIP2 protocol.
This script manages IP alias in different subnet with quagga/ripd.
It can add an IP alias, or remove one.
</longdesc>
<shortdesc lang="en">Manages a virtual IP address through RIP2</shortdesc>

<parameters>

<parameter name="ip" unique="1" required="1">
<longdesc lang="en">
The IPv4 address in different subnet, for example "192.168.1.1".
</longdesc>
<shortdesc lang="en">The IP address in different subnet</shortdesc>
<content type="string" default="" />
</parameter>

<parameter name="nic" unique="0">
<longdesc lang="en">
The nic for broadcast the route information.
The ripd uses this nic to broadcast the route informaton to others
</longdesc>
<shortdesc lang="en">The nic for broadcast the route information</shortdesc>
<content type="string" default="eth0"/>
</parameter>

<parameter name="zebra_binary" unique="0">
<longdesc lang="en">
Absolute path to the zebra binary.
</longdesc>
<shortdesc lang="en">zebra binary</shortdesc>
<content type="string" default="$ZEBRA"/>
</parameter>

<parameter name="ripd_binary" unique="0">
<longdesc lang="en">
Absolute path to the ripd binary.
</longdesc>
<shortdesc lang="en">ripd binary</shortdesc>
<content type="string" default="$RIPD"/>
</parameter>

</parameters>

<actions>
<action name="start"   timeout="20s" />
<action name="stop"    timeout="20s" />
<action name="monitor" depth="0"  timeout="20s" interval="5s" />
<action name="validate-all"  timeout="20s" />
<action name="meta-data"  timeout="5s" />
</actions>
</resource-agent>
END
exit $OCF_SUCCESS
}

usage() {
  echo $USAGE >&2
}

new_config_file() {
	echo new_config_file $1 $2 $3
	cat >$RIPDCONF <<END
hostname ripd
password zebra
debug rip events
debug rip packet
debug rip zebra
log file /var/log/quagga/quagga.log
router rip
!nic_tag
 no passive-interface $2
 network $2
 distribute-list private out $2
 distribute-list private in $2
!metric_tag
 redistribute connected metric $3
!ip_tag
access-list private permit $1/32
access-list private deny any
END
}
check_params() {
	if [ x"$OCF_RESKEY_ip" = x ]
	then
		ocf_log err "ip is a required parameter"
		exit $OCF_ERR_CONFIGURED
	fi
}
set_metric() {
	echo set_metric $1
	sed "s/redistribute connected metric .*/redistribute connected metric $1/g" $RIPDCONF > $RIPDCONF.tmp
	cp $RIPDCONF.tmp $RIPDCONF
}

add_ip() {
	echo add_ip $1
	sed "s/ip_tag/ip_tag\naccess-list private permit $1\/32/g" $RIPDCONF > $RIPDCONF.tmp
	cp $RIPDCONF.tmp $RIPDCONF
}

del_ip() {
	echo del_ip $1
	sed "/$1/d" $RIPDCONF > $RIPDCONF.tmp
	cp $RIPDCONF.tmp $RIPDCONF
	if $GREP "access-list private permit" $RIPDCONF>/dev/null 
	then
		echo some other IP is running
		reload_config
	else
		stop_quagga
		echo remove $RIPDCONF
		rm $RIPDCONF
	fi
	
}

add_nic() {
	echo add_nic $1
	if $GREP "network $1" $RIPDCONF >/dev/null 
	then
		echo the nic is already in the config file
	else
		sed "s/nic_tag/nic_tag\n no passive-interface $1\n network $1\n distribute-list private out $1\n distribute-list private in $1/g" $RIPDCONF > $RIPDCONF.tmp
		cp $RIPDCONF.tmp $RIPDCONF
	fi
}

reload_config() {
	echo reload_config
	echo $RIPDCONF:
	cat $RIPDCONF
	echo killall -SIGHUP ripd
	killall -SIGHUP ripd
}

start_quagga() {
	echo start_quagga
	echo $RIPDCONF:
	cat $RIPDCONF
	echo $ZEBRA -d
	$ZEBRA -d
	echo $RIPD -d -f $RIPDCONF
	$RIPD -d -f $RIPDCONF
}

stop_quagga() {
	echo stop_quagga
	echo $RIPDCONF:
	cat $RIPDCONF
	echo killall -SIGTERM ripd
	killall -SIGTERM ripd
	echo killall -SIGTERM zebra
	killall -SIGTERM zebra
}

start_rip_ip() {
	echo start_rip_ip
	check_params	

	if [ x"$OCF_RESKEY_nic" = x ]
	then
		echo OCF_RESKEY_nic is null, set to eth0
		OCF_RESKEY_nic="eth0"
	fi
	
	status_rip_ip
	case $? in
	$OCF_SUCCESS)
		ocf_log info "already running"
		exit $OCF_SUCCESS
		;;
	$OCF_NOT_RUNNING)
		;;
	*)
		ocf_log info "state undefined, stopping first"
		stop_rip_ip
		;;
	esac

	$IP2UTIL addr add $OCF_RESKEY_ip/32 dev lo          
	if [ -f "$RIPDCONF" ]
	then
		# there is a config file, add new data(IP,nic,metric) 
		# to the existing config file.
		add_ip $OCF_RESKEY_ip
		add_nic $OCF_RESKEY_nic
		set_metric 1
		reload_config
		echo sleep 3
		sleep 3
		set_metric 3
		reload_config
	else
		new_config_file $OCF_RESKEY_ip $OCF_RESKEY_nic 1
		start_quagga
		echo sleep 3
		sleep 3
		set_metric 3
		reload_config
	fi
	return $OCF_SUCCESS
}

stop_rip_ip() {
	echo stop_rip_ip
	check_params
	status_rip_ip
	if [ $? = $OCF_NOT_RUNNING ]
	then
		exit $OCF_SUCCESS
	fi
	$IP2UTIL addr del $OCF_RESKEY_ip dev lo
	echo sleep 2
	sleep 2
	del_ip	$OCF_RESKEY_ip
	return $OCF_SUCCESS
}

status_rip_ip() {
	check_params
	if $IP2UTIL addr | $GREP $OCF_RESKEY_ip >/dev/null 
	then
		if $GREP $OCF_RESKEY_ip $RIPDCONF >/dev/null 
		then
			if pidof ripd >/dev/null
			then
				return $OCF_SUCCESS
			fi
		fi
		return $OCF_ERR_GENERIC
	fi
	return $OCF_NOT_RUNNING
}

if
  [ $# -ne 1 ]
then
  usage
  exit $OCF_ERR_ARGS
fi

[ x != x"$OCF_RESKEY_zebra_binary" ] &&
	ZEBRA=$OCF_RESKEY_zebra_binary
[ x != x"$OCF_RESKEY_ripd_binary" ] &&
	RIPD=$OCF_RESKEY_ripd_binary

case $1 in
  start)	start_rip_ip;;
  stop)		stop_rip_ip;;
  status)	status_rip_ip;;
  monitor)	status_rip_ip;;
  validate-all)	check_binary $IP2UTIL
		exit $OCF_SUCCESS;;
  meta-data)	meta_data;;
  usage)	usage; exit $OCF_SUCCESS;;
  *)		usage
 		exit $OCF_ERR_UNIMPLEMENTED
		;;
esac
