Page MenuHomeClusterLabs Projects
Files F1842444

No OneTemporary
Actions

View Options

diff --git a/extra/cluster-init b/extra/cluster-init
index 85abcfed71..0c485d222e 100755
--- a/extra/cluster-init
+++ b/extra/cluster-init
@@ -1,691 +1,691 @@
#!/bin/bash
accept_defaults=0
do_raw=0
CMAN=0
do_heartbeat=0
plugin_ver=-1
pcmk_ver=11
nodelist=0
INSTALL=No
cs_conf=/etc/corosync/corosync.conf
rpm_repo=
distro=fedora-15
dsh_group=0
cluster=dummy0
# Corosync/OpenAIS Settings
cs_port=666
# Settings that work great on nXX
join=60
#token=3000
consensus=1500
# Official settings
join=2000
token=5000
consensus=2500
# Testing
join=1000
consensus=7500
do_debug=off
function ip_for_node() {
ping -c 1 $1 | grep "bytes from" | head -n 1 | sed -e 's/.*bytes from//' -e 's/: icmp.*//' | awk '{print $NF}' | sed 's:(::' | sed 's:)::'
# if [ $do_raw = 1 ]; then
# echo $1
# else
# #host $1 | grep "has address" | head -n 1 | awk '{print $NF}' | sed 's:(::' | sed 's:)::'
# fi
}
function id_for_node() {
ip_for_node $* | tr '.' ' ' | awk '{print $4}'
}
function name_for_node() {
echo $1 | awk -F. '{print $1}'
}
function helptext() {
echo "cluster-init - Configure cluster communication for the different infrastructures supported by Pacemaker"
echo ""
echo "-g, --group Specify the group to operate on/with"
echo "-w, --host Specify a host to operate on/with. May be specified multiple times"
echo "-r, --raw-ip Supplied nodes were listed as their IP addresses"
echo ""
echo "-h, --heartbeat configure for heartbeat"
echo "-c, --corosync configure for corosync"
echo "-C, --nodelist configure for corosync with a node list"
echo "-o, --openais configure for openais"
echo "--cman configure for cman"
echo "-p, --plugin version"
echo ""
echo "-I, --install Install packages"
echo "-R, --repo name Setup and update/install Pacemaker from the named clusterlabs.org repo"
echo " Known values: rpm, rpm-test, rpm-next, rpm-test-next, rpm-test-rhel"
echo "-D, --distro The distro within the --repo. Defaults to fedora-15"
echo ""
echo "-d, --debug Enable debug logging for the cluster"
echo "-10 install stable-1.0 packages, implies: -p 0 -R rpm-test -I"
exit $1
}
host_input=""
while true; do
case "$1" in
-g) cluster=$2;
dsh_group=`echo $cluster | sed s/[a-zA-Z]*//`
host_input="-g $cluster"
shift; shift;;
-w|--host)
for h in $2; do
host_input="$host_input -w $h";
done
shift; shift;;
-w) host_input="$host_input -w $2"
shift; shift;;
-r|--raw-ip) do_raw=1; shift;;
-D) distro=$2; shift; shift;;
-d|--debug) do_debug=on; shift;;
-R|--repo) rpm_repo=$2; shift; shift;;
-I|--install) INSTALL=Yes; shift;;
cman|--cman) CMAN=1; cs_conf=/etc/cluster/cluster.conf; shift;;
-h|--heartbeat) do_heartbeat=1; shift;;
-c|--corosync) cs_conf=/etc/corosync/corosync.conf; shift;;
-C|--nodelist) cs_conf=/etc/corosync/corosync.conf; nodelist=1; shift;;
-o|--openais) cs_conf=/etc/ais/openais.conf; shift;;
--plugin|-p) plugin_ver=$2; shift; shift;;
rhel) CMAN=1; rpm_repo=rpm-test-rhel; distro=rhel-6; shift;;
-10) pcmk_ver=10; plugin_ver=0; rpm_repo="rpm-test"; install=1; shift;;
-y|--yes|--defaults) accept_defaults=1; shift;;
-x) set -x; shift;;
-\?|--help) helptext 0; shift;;
"") break;;
*) echo "unknown option: $1"; exit 1;;
esac
done
if [ -z "$host_input" ]; then
if [ ! -z $CTS_GROUP ]; then
host_input="-g $CTS_GROUP"
dsh_group=`echo $CTS_GROUP | sed s/[a-zA-Z]*//`
else
echo "You didn't specify any nodes to configure"
exit 1
fi
fi
host_list=`cluster-helper --list short $host_input`
num_hosts=`echo $host_list | wc -w`
if [ -z $dsh_group ]; then
dsh_group=1
fi
if [ $accept_defaults = 0 ]; then
echo ""
read -p "Shall I install an ssh key to cluster nodes? [No] " -t 60 SSH
echo ""
echo "SELinux prevent many things, including password-less ssh logins"
read -p "Shall I disable selinux? [Yes] " -t 60 SELINUX
echo ""
echo "Incorrectly configured firewalls will prevent corosync from starting up"
read -p "Shall I disable iptables? [Yes] " -t 60 IPTABLES
if [ $CMAN = 1 ]; then
echo ""
echo "Without a default domain, cman probably wont start because it can't look up the IP for hosts"
read -p "Shall I set one? [No] (domain.name) " -t 60 DOMAIN
elif [ $pcmk_ver = 10 ]; then
echo ""
echo "Without a default domain, external/ssh fencing probably wont work because it can't find its peers"
read -p "Shall I set one? [No] (domain) " -t 60 DOMAIN
fi
echo ""
if [ -z $INSTALL ]; then
read -p "Shall I install/update the relevant packages? [No] " -t 60 INSTALL
fi
read -p "Shall I sync the date/time? [Yes] " -t 60 DATE
fi
if [ -z $SSH ]; then
SSH="No"
fi
if [ -z $SELINUX ]; then
SELINUX="Yes"
fi
if [ -z $IPTABLES ]; then
IPTABLES="Yes"
fi
if [ -z $DOMAIN ]; then
DOMAIN="No"
fi
if [ -z $INSTALL ]; then
INSTALL="No"
fi
if [ -z $DATE ]; then
DATE="Yes"
fi
case $SSH in
[Yy][Ee][Ss]|[Yy])
for host in $host_list; do
echo "Installing our ssh key on ${host}"
ssh-copy-id root@${host} >/dev/null 2>&1
done
;;
esac
case $DATE in
[Yy][Ee][Ss]|[Yy])
now=`date`
for host in $host_list; do
echo "Setting time on ${host}"
scp /etc/localtime root@${host}:/etc
ssh -l root ${host} -- date -s "'$now'"
echo ""
done
;;
esac
REPO=
if [ ! -z $rpm_repo ]; then
REPO=$rpm_repo/$distro
fi
-pkgs="corosync fence-virt qarsh-server xinetd nmap abrt-cli gdb fence-agents"
+pkgs="corosync fence-virt qarsh-server xinetd nmap abrt-cli gdb fence-agents perl-TimeDate"
if [ $do_heartbeat = 1 ]; then
pkgs="$pkgs heartbeat"
fi
if [ $CMAN = 1 ]; then
pkgs="$pkgs cman"
fi
init=`mktemp`
cat<<-END>$init
verbose=0
pkgs="$pkgs"
lhost=\`uname -n\`
lshort=\`echo \$lhost | awk -F. '{print \$1}'\`
log() {
printf "%-10s \$*\n" "\$lshort:" 1>&2
}
debug() {
if [ \$verbose -gt 0 ]; then
log "Debug: \$*"
fi
}
info() {
log "\$*"
}
warning() {
log "WARN: \$*"
}
fatal() {
log "ERROR: \$*"
exit 1
}
case $SELINUX in
[Yy][Ee][Ss]|[Yy]|"")
sed -i.sed "s/enforcing/disabled/g" /etc/selinux/config
;;
esac
case $IPTABLES in
[Yy][Ee][Ss]|[Yy]|"")
service iptables stop
chkconfig iptables off
;;
esac
case $DOMAIN in
[Nn][Oo]|"")
;;
*.*)
if
! grep domain /etc/resolv.conf
then
sed -i.sed "s/nameserver/domain\ $DOMAIN\\\nnameserver/g" /etc/resolv.conf
fi
;;
*) echo "Unknown domain: $DOMAIN";;
esac
case $INSTALL in
[Yy][Ee][Ss]|[Yy]|"")
if [ ! -z $REPO ]; then
info Configuring Clusterlabs repo: $REPO
yum install -y wget
rm -f /etc/yum.repos.d/clusterlabs.repo
wget -O /etc/yum.repos.d/clusterlabs.repo http://www.clusterlabs.org/$REPO/clusterlabs.repo &>/dev/null
yum clean all
fi
info Installing cluster software
if [ $pcmk_ver = 10 ]; then
yum install -y $pkgs at
service atd start
systemctl enable atd.service
yum install -y "pacemaker < 1.1"
else
yum install -y $pkgs pacemaker
fi
;;
esac
info "Configuring services"
chkconfig xinetd on
service xinetd start &>/dev/null
chkconfig corosync off &> /dev/null
chkconfig heartbeat off &> /dev/null
mkdir -p /etc/cluster
info "Turning on core files"
grep -q "unlimited" /etc/bashrc
if [ $? = 1 ]; then
sed -i.sed "s/bashrc/bashrc\\\nulimit\ -c\ unlimited/g" /etc/bashrc
fi
if [ $CMAN = 1 ]; then
grep -q "logger" /etc/init.d/cman
if [ $? = 1 ]; then
info "Turning on CMAN init-script logging"
sed -i.sed "s/function=/logger\ -p\ daemon.info\ cman\ init\ \\\$1\\\nfunction=/g" /etc/init.d/cman
fi
sed -i.sed "s/.*CMAN_QUORUM_TIMEOUT=.*/CMAN_QUORUM_TIMEOUT=0/g" /etc/sysconfig/cman
fi
END
function create_hb_config() {
cat <<-END >/tmp/lha.$$
auth 1
1 crc
END
printf "%-10s Installing authkeys\n" ${host}
scp -q /tmp/lha.$$ root@${host}:/etc/ha.d/authkeys
ssh -l root ${host} -- chmod 600 /etc/ha.d/authkeys
cat <<-END >/tmp/lha.$$
traditional_compression off
compression bz2
realtime yes
conn_logd_time 120
coredumps true
udpport $cs_port$dsh_group
bcast eth0
autojoin any
logfacility daemon
crm respawn
# 8-node version
debug 0
keepalive 1
warntime 6
deadtime 10
initdead 15
END
printf "%-10s Installing ha.cf\n" ${host}
scp -q /tmp/lha.$$ root@${host}:/etc/ha.d/ha.cf
}
function patch_cs_config() {
test $num_hosts != 2
two_node=$?
priority="info"
if [ $do_debug = 1 ]; then
priority="debug"
fi
ssh -l root ${host} -- sed -i.sed "s/.*mcastaddr:.*/mcastaddr:\ 226.94.1.1/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/.*mcastport:.*/mcastport:\ $cs_port$dsh_group/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/.*bindnetaddr:.*/bindnetaddr:\ $ip/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/.*syslog_facility:.*/syslog_facility:\ daemon/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/.*logfile_priority:.*/logfile_priority:\ $priority/g" $cs_conf
if [ ! -z $token ]; then
ssh -l root ${host} -- sed -i.sed "s/.*token:.*/token:\ $token/g" $cs_conf
fi
if [ ! -z $consensus ]; then
ssh -l root ${host} -- sed -i.sed "s/.*consensus:.*/consensus:\ $consensus/g" $cs_conf
fi
if [ ! -z $join ]; then
ssh -l root ${host} -- sed -i.sed "s/^join:.*/join:\ $join/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/\\\Wjoin:.*/join:\ $join/g" $cs_conf
fi
if [ $plugin_ver -ge 0 ]; then
ssh -l root ${host} -- grep -q "name: pacemaker" $cs_conf 2>&1 > /dev/null
if [ $? = 0 ]; then
ssh -l root ${host} -- sed -i.sed "s/.*ver:.*/ver:\ $plugin_ver/g" $cs_conf
else
printf "%-10s Wrong quorum provider: installing $cs_conf for plugin v${plugin_ver} instead\n" ${host}
create_cs_config
fi
elif [ $CMAN = 1 ]; then
ssh -l root ${host} -- grep -q "quorum_cman" $cs_conf 2>&1 > /dev/null
if [ $? = 0 ]; then
ssh -l root ${host} -- sed -i.sed "s/\\\Wexpected_votes:.*/expected_votes:\ $num_hosts/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/\\\Wtwo_node:.*/two_node:\ $two_node/g" $cs_conf
else
printf "%-10s Wrong quorum provider: installing $cs_conf for cman instead\n" ${host}
create_cs_config
fi
else
ssh -l root ${host} -- grep -q "corosync_votequorum" $cs_conf 2>&1 > /dev/null
if [ $? = 0 ]; then
ssh -l root ${host} -- sed -i.sed "s/\\\Wexpected_votes:.*/expected_votes:\ $num_hosts/g" $cs_conf
ssh -l root ${host} -- sed -i.sed "s/\\\Wtwo_node:.*/two_node:\ $two_node/g" $cs_conf
else
printf "%-10s Wrong quorum provider: installing $cs_conf for corosync instead\n" ${host}
create_cs_config
fi
fi
}
function create_cs_config() {
cs_tmp=/tmp/cs_conf.$$
test $num_hosts != 2
two_node=$?
# Base config
priority="info"
if [ $do_debug = 1 ]; then
priority="debug"
fi
cat <<-END >$cs_tmp
# Please read the corosync.conf.5 manual page
totem {
version: 2
# cypto_cipher and crypto_hash: Used for mutual node authentication.
# If you choose to enable this, then do remember to create a shared
# secret with "corosync-keygen".
crypto_cipher: none
crypto_hash: none
# Assign a fixed node id
nodeid: $id
# Disable encryption
secauth: off
# interface: define at least one interface to communicate
# over. If you define more than one interface stanza, you must
# also set rrp_mode.
interface {
# Rings must be consecutively numbered, starting at 0.
ringnumber: 0
# This is normally the *network* address of the
# interface to bind to. This ensures that you can use
# identical instances of this configuration file
# across all your cluster nodes, without having to
# modify this option.
bindnetaddr: $ip
# However, if you have multiple physical network
# interfaces configured for the same subnet, then the
# network address alone is not sufficient to identify
# the interface Corosync should bind to. In that case,
# configure the *host* address of the interface
# instead:
# bindnetaddr: 192.168.1.1
# When selecting a multicast address, consider RFC
# 2365 (which, among other things, specifies that
# 239.255.x.x addresses are left to the discretion of
# the network administrator). Do not reuse multicast
# addresses across multiple Corosync clusters sharing
# the same network.
# Corosync uses the port you specify here for UDP
# messaging, and also the immediately preceding
# port. Thus if you set this to 5405, Corosync sends
# messages over UDP ports 5405 and 5404.
mcastport: $cs_port$dsh_group
# Time-to-live for cluster communication packets. The
# number of hops (routers) that this ring will allow
# itself to pass. Note that multicast routing must be
# specifically enabled on most network routers.
ttl: 1
mcastaddr: 226.94.1.1
}
}
logging {
debug: off
fileline: off
to_syslog: yes
to_stderr: no
syslog_facility: daemon
timestamp: on
to_logfile: yes
logfile: /var/log/corosync.log
logfile_priority: $priority
}
amf {
mode: disabled
}
END
# Corosync Variant
if [ $plugin_ver -ge 0 ]; then
cat <<-END >>$cs_tmp
service {
name: pacemaker
ver: $plugin_ver
}
END
elif [ $CMAN = 1 ]; then
cat <<-END >>$cs_tmp
cluster {
name: $cluster
clusternodes {
END
for peer in $host_list; do
p_name=`name_for_node $peer`
p_id=`id_for_node $peer`
cat <<-END >>$cs_tmp
clusternode {
votes: 1
nodeid: $p_id
name: $p_name
}
END
done
cat <<-END >>$cs_tmp
}
cman {
expected_votes: $num_hosts
cluster_id: $dsh_group
nodename: $cs_short_host
two_node: $two_node
max_queued: 10
}
}
service {
name: corosync_cman
ver: 0
}
quorum {
provider: quorum_cman
}
END
elif [ $nodelist = 1 ]; then
cat <<-END >>$cs_tmp
nodelist {
END
for peer in $host_list; do
p_name=`name_for_node $peer`
p_id=`id_for_node $peer`
p_ip=`ip_for_node $peer`
cat <<-END >>$cs_tmp
node {
ring0_addr: $p_ip
nodeid: $p_id
quorum_votes: 1
name: $peer
}
END
done
cat <<-END >>$cs_tmp
}
quorum {
provider: corosync_votequorum
expected_votes: $num_hosts
votes: 1
two_node: $two_node
wait_for_all: 0
last_man_standing: 0
auto_tie_breaker: 0
}
END
else
cat <<-END >>$cs_tmp
quorum {
provider: corosync_votequorum
expected_votes: $num_hosts
votes: 1
two_node: $two_node
wait_for_all: 0
last_man_standing: 0
auto_tie_breaker: 0
}
END
fi
scp -q $cs_tmp root@${host}:$cs_conf
rm -f $cs_tmp
}
function create_cman_config() {
cs_tmp=/tmp/cs_conf.$$
cat <<-END >$cs_tmp
<?xml version="1.0"?>
<cluster config_version="1" name="$cluster">
<logging debug="$do_debug"/>
<clusternodes>
END
lpc=1
for h in $host_list; do
short_h=`name_for_node $h`
cat <<-END >>$cs_tmp
<clusternode name="$short_h" nodeid="$lpc">
<fence>
<method name="pcmk-redirect">
<device name="pcmk" port="$short_h"/>
</method>
</fence>
</clusternode>
END
lpc=`expr $lpc + 1`
done
test $num_hosts != 2
two_node=$?
extra=""
if [ $two_node = 1 ]; then
extra="\n <cman two_node=\"1\" expected_votes=\"1\"/>"
fi
cat <<-END >>$cs_tmp
</clusternodes>
<fencedevices>
<fencedevice name="pcmk" agent="fence_pcmk"/>
</fencedevices>$extra
</cluster>
END
scp -q $cs_tmp root@${host}:$cs_conf
rm -f $cs_tmp
}
for host in $host_list; do
echo ""
echo ""
echo "* Configuring $host"
cs_short_host=`name_for_node $host`
ip=`ip_for_node $host`
id=`id_for_node $host`
echo $ip | grep -qis NXDOMAIN
if [ $? = 0 ]; then
echo "Couldn't find resolve $host to an IP address"
exit 1
fi
if [ `uname -n` = $host ]; then
bash $init
else
cat $init | ssh -l root -T $host -- "cat > $init; bash $init"
fi
if [ -e /etc/cluster/fence_xvm.key ]; then
scp /etc/cluster/fence_xvm.key root@${host}:/etc/cluster/fence_xvm.key
fi
if [ $pcmk_ver = 10 ]; then
scp /etc/hosts root@${host}:/etc/hosts
scp ~/.ssh/id_dsa.suse root@${host}:.ssh/id_dsa
scp ~/.ssh/known_hosts root@${host}:.ssh/known_hosts
fi
if [ $do_heartbeat = 1 ]; then
create_hb_config ${host}
elif [ $CMAN = 1 ]; then
create_cman_config
printf "%-10s Installed $cs_conf\n" ${host}:
else
ssh -l root ${host} -- grep -q "token:" $cs_conf 2>&1 > /dev/null
new_config=$?
new_config=1
if [ $new_config = 0 ]; then
printf "%-10s Updating $cs_conf\n" ${host}:
patch_cs_config
else
printf "%-10s Installing $cs_conf\n" ${host}:
create_cs_config
fi
fi
done

File Metadata

Mime Type
text/x-diff
Expires
Sat, Nov 23, 4:48 PM (17 h, 26 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1018952
Default Alt Text
(17 KB)

Event Timeline