Page MenuHomeClusterLabs Projects
Files F2825067

No OneTemporary
Actions

View Options

diff --git a/doc/sphinx/Pacemaker_Explained/local-options.rst b/doc/sphinx/Pacemaker_Explained/local-options.rst
index 03abc42ad6..3549ff8aad 100644
--- a/doc/sphinx/Pacemaker_Explained/local-options.rst
+++ b/doc/sphinx/Pacemaker_Explained/local-options.rst
@@ -1,518 +1,556 @@
Host-Local Configuration
------------------------
.. index::
pair: XML element; configuration
.. note:: Directory and file paths below may differ on your system depending on
your Pacemaker build settings. Check your Pacemaker configuration
file to find the correct paths.
Pacemaker supports several host-local configuration options. These options can
be configured on each node in the main Pacemaker configuration file
(|PCMK_CONFIG_FILE|) in the format ``<NAME>="<VALUE>"``. They work by setting
environment variables when Pacemaker daemons start up.
.. list-table:: **Local Options**
:class: longtable
:widths: 2 2 2 5
:header-rows: 1
* - Name
- Type
- Default
- Description
+
+ * - .. _cib_pam_service:
+
+ .. index::
+ pair: node option; CIB_pam_service
+
+ CIB_pam_service
+ - :ref:`text <text>`
+ - login
+ - PAM service to use for remote CIB client authentication (passed to
+ ``pam_start``).
+
* - .. _pcmk_logfacility:
.. index::
pair: node option; PCMK_logfacility
PCMK_logfacility
- :ref:`enumeration <enumeration>`
- daemon
- Enable logging via the system log or journal, using the specified log
facility. Messages sent here are of value to all Pacemaker
administrators. This can be disabled using ``none``, but that is not
recommended. Allowed values:
* ``none``
* ``daemon``
* ``user``
* ``local0``
* ``local1``
* ``local2``
* ``local3``
* ``local4``
* ``local5``
* ``local6``
* ``local7``
* - .. _pcmk_logpriority:
.. index::
pair:: node option; PCMK_logpriority
PCMK_logpriority
- :ref:`enumeration <enumeration>`
- notice
- Unless system logging is disabled using ``PCMK_logfacility=none``,
messages of the specified log severity and higher will be sent to the
system log. The default is appropriate for most installations. Allowed
values:
* ``emerg``
* ``alert``
* ``crit``
* ``error``
* ``warning``
* ``notice``
* ``info``
* ``debug``
* - .. _pcmk_logfile:
.. index::
pair:: node option; PCMK_logfile
PCMK_logfile
- :ref:`text <text>`
- |PCMK_LOG_FILE|
- Unless set to ``none``, more detailed log messages will be sent to the
specified file (in addition to the system log, if enabled). These
messages may have extended information, and will include messages of info
severity. This log is of more use to developers and advanced system
administrators, and when reporting problems. Note: The default is
|PCMK_CONTAINER_LOG_FILE| (inside the container) for bundled container
nodes; this would typically be mapped to a different path on the host
running the container.
* - .. _pcmk_logfile_mode:
.. index::
pair:: node option; PCMK_logfile_mode
PCMK_logfile_mode
- :ref:`text <text>`
- 0660
- Pacemaker will set the permissions on the detail log to this value (see
``chmod(1)``).
* - .. _pcmk_debug:
.. index::
pair:: node option; PCMK_debug
PCMK_debug
- :ref:`enumeration <enumeration>`
- no
- Whether to send debug severity messages to the detail log. This may be
set for all subsystems (``yes`` or ``no``) or for specific (comma-
separated) subsystems. Allowed subsystems are:
* ``pacemakerd``
* ``pacemaker-attrd``
* ``pacemaker-based``
* ``pacemaker-controld``
* ``pacemaker-execd``
* ``pacemaker-fenced``
* ``pacemaker-schedulerd``
Example: ``PCMK_debug="pacemakerd,pacemaker-execd"``
* - .. _pcmk_stderr:
.. index::
pair:: node option; PCMK_stderr
PCMK_stderr
- :ref:`boolean <boolean>`
- no
- *Advanced Use Only:* Whether to send daemon log messages to stderr. This
would be useful only during troubleshooting, when starting Pacemaker
manually on the command line.
Setting this option in the configuration file is pointless, since the
file is not read when starting Pacemaker manually. However, it can be set
directly as an environment variable on the command line.
* - .. _pcmk_trace_functions:
.. index::
pair:: node option; PCMK_trace_functions
PCMK_trace_functions
- :ref:`text <text>`
-
- *Advanced Use Only:* Send debug and trace severity messages from these
(comma-separated) source code functions to the detail log.
Example:
``PCMK_trace_functions="func1,func2"``
* - .. _pcmk_trace_files:
.. index::
pair:: node option; PCMK_trace_files
PCMK_trace_files
- :ref:`text <text>`
-
- *Advanced Use Only:* Send debug and trace severity messages from all
functions in these (comma-separated) source file names to the detail log.
Example: ``PCMK_trace_files="file1.c,file2.c"``
* - .. _pcmk_trace_formats:
.. index::
pair:: node option; PCMK_trace_formats
PCMK_trace_formats
- :ref:`text <text>`
-
- *Advanced Use Only:* Send trace severity messages that are generated by
these (comma-separated) format strings in the source code to the detail
log.
Example: ``PCMK_trace_formats="Error: %s (%d)"``
* - .. _pcmk_trace_tags:
.. index::
pair:: node option; PCMK_trace_tags
PCMK_trace_tags
- :ref:`text <text>`
-
- *Advanced Use Only:* Send debug and trace severity messages related to
these (comma-separated) resource IDs to the detail log.
Example: ``PCMK_trace_tags="client-ip,dbfs"``
* - .. _pcmk_blackbox:
.. index::
pair:: node option; PCMK_blackbox
PCMK_blackbox
- :ref:`enumeration <enumeration>`
- no
- *Advanced Use Only:* Enable blackbox logging globally (``yes`` or ``no``)
or by subsystem. A blackbox contains a rolling buffer of all logs (of all
severities). Blackboxes are stored under |CRM_BLACKBOX_DIR| by default,
by default, and their contents can be viewed using the ``qb-blackbox(8)``
command.
The blackbox recorder can be enabled at start using this variable, or at
runtime by sending a Pacemaker subsystem daemon process a ``SIGUSR1`` or
``SIGTRAP`` signal, and disabled by sending ``SIGUSR2`` (see
``kill(1)``). The blackbox will be written after a crash, assertion
failure, or ``SIGTRAP`` signal.
See :ref:`PCMK_debug <pcmk_debug>` for allowed subsystems.
Example:
``PCMK_blackbox="pacemakerd,pacemaker-execd"``
* - .. _pcmk_trace_blackbox:
.. index::
pair:: node option; PCMK_trace_blackbox
PCMK_trace_blackbox
- :ref:`enumeration <enumeration>`
-
- *Advanced Use Only:* Write a blackbox whenever the message at the
specified function and line is logged. Multiple entries may be comma-
separated.
Example: ``PCMK_trace_blackbox="remote.c:144,remote.c:149"``
* - .. _pcmk_node_start_state:
.. index::
pair:: node option; PCMK_node_start_state
PCMK_node_start_state
- :ref:`enumeration <enumeration>`
- default
- By default, the local host will join the cluster in an online or standby
state when Pacemaker first starts depending on whether it was previously
put into standby mode. If this variable is set to ``standby`` or
``online``, it will force the local host to join in the specified state.
* - .. _pcmk_node_action_limit:
.. index::
pair:: node option; PCMK_node_action_limit
PCMK_node_action_limit
- :ref:`nonnegative integer <nonnegative_integer>`
-
- Specify the maximum number of jobs that can be scheduled on this node. If
set, this overrides the ``node-action-limit`` cluster property for this
node.
* - .. _pcmk_shutdown_delay:
.. index::
pair:: node option; PCMK_shutdown_delay
PCMK_shutdown_delay
- :ref:`timeout <timeout>`
-
- Specify a delay before shutting down ``pacemakerd`` after shutting down
all other Pacemaker daemons.
* - .. _pcmk_fail_fast:
.. index::
pair:: node option; PCMK_fail_fast
PCMK_fail_fast
- :ref:`boolean <boolean>`
- no
- By default, if a Pacemaker subsystem crashes, the main ``pacemakerd``
process will attempt to restart it. If this variable is set to ``yes``,
``pacemakerd`` will panic the local host instead.
* - .. _pcmk_panic_action:
.. index::
pair:: node option; PCMK_panic_action
PCMK_panic_action
- :ref:`enumeration <enumeration>`
- reboot
- Pacemaker will panic the local host under certain conditions. By default,
this means rebooting the host. This variable can change that behavior: if
``crash``, trigger a kernel crash (useful if you want a kernel dump to
investigate); if ``sync-reboot`` or ``sync-crash``, synchronize
filesystems before rebooting the host or triggering a kernel crash. The
sync values are more likely to preserve log messages, but with the risk
that the host may be left active if the synchronization hangs.
* - .. _pcmk_authkey_location:
.. index::
pair:: node option; PCMK_authkey_location
PCMK_authkey_location
- :ref:`text <text>`
- |PCMK_AUTHKEY_FILE|
- Use the contents of this file as the authorization key to use with
Pacemaker Remote connections. This file must be readable by Pacemaker
daemons (that is, it must allow read permissions to either the
|CRM_DAEMON_USER| user or the |CRM_DAEMON_GROUP| group), and its contents
must be identical on all nodes.
* - .. _pcmk_remote_address:
.. index::
pair:: node option; PCMK_remote_address
PCMK_remote_address
- :ref:`text <text>`
-
- By default, if the Pacemaker Remote service is run on the local node, it
will listen for connections on all IP addresses. This may be set to one
address to listen on instead, as a resolvable hostname or as a numeric
IPv4 or IPv6 address. When resolving names or listening on all addresses,
IPv6 will be preferred if available. When listening on an IPv6 address,
IPv4 clients will be supported via IPv4-mapped IPv6 addresses.
Example: ``PCMK_remote_address="192.0.2.1"``
* - .. _pcmk_remote_port:
.. index::
pair:: node option; PCMK_remote_port
PCMK_remote_port
- :ref:`port <port>`
- 3121
- Use this TCP port number for Pacemaker Remote node connections. This
value must be the same on all nodes.
* - .. _pcmk_remote_pid1:
.. index::
pair:: node option; PCMK_remote_pid1
PCMK_remote_pid1
- :ref:`enumeration <enumeration>`
- default
- *Advanced Use Only:* When a bundle resource's ``run-command`` option is
left to default, Pacemaker Remote runs as PID 1 in the bundle's
containers. When it does so, it loads environment variables from the
container's |PCMK_INIT_ENV_FILE| and performs the PID 1 responsibility of
reaping dead subprocesses.
This option controls whether those actions are performed when Pacemaker
Remote is not running as PID 1. It is intended primarily for developer
testing but can be useful when ``run-command`` is set to a separate,
custom PID 1 process that launches Pacemaker Remote.
* ``full``: Pacemaker Remote loads environment variables from
|PCMK_INIT_ENV_FILE| and reaps dead subprocesses.
* ``vars``: Pacemaker Remote loads environment variables from
|PCMK_INIT_ENV_FILE| but does not reap dead subprocesses.
* ``default``: Pacemaker Remote performs neither action.
If Pacemaker Remote is running as PID 1, this option is ignored, and the
behavior is the same as for ``full``.
* - .. _pcmk_tls_priorities:
.. index::
pair:: node option; PCMK_tls_priorities
PCMK_tls_priorities
- :ref:`text <text>`
- |PCMK_GNUTLS_PRIORITIES|
- *Advanced Use Only:* These GnuTLS cipher priorities will be used for TLS
connections (whether for Pacemaker Remote connections or remote CIB
access, when enabled). See:
https://gnutls.org/manual/html_node/Priority-Strings.html
Pacemaker will append ``":+ANON-DH"`` for remote CIB access and
``":+DHE-PSK:+PSK"`` for Pacemaker Remote connections, as they are
required for the respective functionality.
Example:
``PCMK_tls_priorities="SECURE128:+SECURE192"``
* - .. _pcmk_dh_min_bits:
.. index::
pair:: node option; PCMK_dh_min_bits
PCMK_dh_min_bits
- :ref:`nonnegative integer <nonnegative_integer>`
- 0 (no minimum)
- *Advanced Use Only:* Set a lower bound on the bit length of the prime
number generated for Diffie-Hellman parameters needed by TLS connections.
The default is no minimum.
The server (Pacemaker Remote daemon, or CIB manager configured to accept
remote clients) will use this value to provide a floor for the value
recommended by the GnuTLS library. The library will only accept a limited
number of specific values, which vary by library version, so setting
these is recommended only when required for compatibility with specific
client versions.
Clients (connecting cluster nodes or remote CIB commands) will require
that the server use a prime of at least this size. This is recommended
only when the value must be lowered in order for the client's GnuTLS
library to accept a connection to an older server.
* - .. _pcmk_dh_max_bits:
.. index::
pair:: node option; PCMK_dh_max_bits
PCMK_dh_max_bits
- :ref:`nonnegative integer <nonnegative_integer>`
- 0 (no maximum)
- *Advanced Use Only:* Set an upper bound on the bit length of the prime
number generated for Diffie-Hellman parameters needed by TLS connections.
The default is no maximum.
The server (Pacemaker Remote daemon, or CIB manager configured to accept
remote clients) will use this value to provide a ceiling for the value
recommended by the GnuTLS library. The library will only accept a limited
number of specific values, which vary by library version, so setting
these is recommended only when required for compatibility with specific
client versions.
Clients do not use ``PCMK_dh_max_bits``.
* - .. _pcmk_ipc_type:
.. index::
pair:: node option; PCMK_ipc_type
PCMK_ipc_type
- :ref:`enumeration <enumeration>`
- shared-mem
- *Advanced Use Only:* Force use of a particular IPC method. Allowed values:
* ``shared-mem``
* ``socket``
* ``posix``
* ``sysv``
* - .. _pcmk_ipc_buffer:
.. index::
pair:: node option; PCMK_ipc_buffer
PCMK_ipc_buffer
- :ref:`nonnegative integer <nonnegative_integer>`
- 131072
- *Advanced Use Only:* Specify an IPC buffer size in bytes. This can be
useful when connecting to large clusters that result in messages
exceeding the default size (which will also result in log messages
referencing this variable).
* - .. _pcmk_cluster_type:
.. index::
pair:: node option; PCMK_cluster_type
PCMK_cluster_type
- :ref:`enumeration <enumeration>`
- corosync
- *Advanced Use Only:* Specify the cluster layer to be used. If unset,
Pacemaker will detect and use a supported cluster layer, if available.
Currently, ``"corosync"`` is the only supported cluster layer. If
multiple layers are supported in the future, this will allow overriding
Pacemaker's automatic detection to select a specific one.
* - .. _pcmk_schema_directory:
.. index::
pair:: node option; PCMK_schema_directory
PCMK_schema_directory
- :ref:`text <text>`
- |CRM_SCHEMA_DIRECTORY|
- *Advanced Use Only:* Specify an alternate location for RNG schemas and
XSL transforms.
* - .. _pcmk_valgrind_enabled:
.. index::
pair:: node option; PCMK_valgrind_enabled
PCMK_valgrind_enabled
- :ref:`enumeration <enumeration>`
- no
- *Advanced Use Only:* Whether subsystem daemons should be run under
``valgrind``. Allowed values are the same as for ``PCMK_debug``.
* - .. _pcmk_callgrind_enabled:
.. index::
pair:: node option; PCMK_callgrind_enabled
PCMK_callgrind_enabled
- :ref:`enumeration <enumeration>`
- no
- *Advanced Use Only:* Whether subsystem daemons should be run under
``valgrind`` with the ``callgrind`` tool enabled. Allowed values are the
same as for ``PCMK_debug``.
+ * - .. _sbd_sync_resource_startup:
+
+ .. index::
+ pair:: node option; SBD_SYNC_RESOURCE_STARTUP
+
+ SBD_SYNC_RESOURCE_STARTUP
+ - :ref:`boolean <boolean>`
+ -
+ - If true, ``pacemakerd`` waits for a ping from ``sbd`` during startup
+ before starting other Pacemaker daemons, and during shutdown after
+ stopping other Pacemaker daemons but before exiting. Default value is set
+ based on the ``--with-sbd-sync-default`` configure script option.
+
+ * - .. _sbd_watchdog_timeout:
+
+ .. index::
+ pair:: node option; SBD_WATCHDOG_TIMEOUT
+
+ SBD_WATCHDOG_TIMEOUT
+ - :ref:`duration <duration>`
+ -
+ - If the ``stonith-watchdog-timeout`` cluster property is set to a negative
+ or invalid value, use double this value as the default if positive, or
+ use 0 as the default otherwise. This value must be greater than the value
+ of ``stonith-watchdog-timeout`` if both are set.
+
* - .. _valgrind_opts:
.. index::
pair:: node option; VALGRIND_OPTS
VALGRIND_OPTS
- :ref:`text <text>`
-
- *Advanced Use Only:* Pass these options to valgrind, when enabled (see
``valgrind(1)``). ``"--vgdb=no"`` should usually be specified because
``pacemaker-execd`` can lower privileges when executing commands, which
would otherwise leave a bunch of unremovable files in ``/tmp``.

File Metadata

Mime Type
text/x-diff
Expires
Sat, Jan 25, 11:21 AM (1 d, 11 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1322334
Default Alt Text
(19 KB)

Event Timeline