Page MenuHomeClusterLabs Projects

No OneTemporary

diff --git a/configure.in b/configure.in
index bbba24ac0..f2b32e947 100644
--- a/configure.in
+++ b/configure.in
@@ -1,2957 +1,2959 @@
dnl
dnl autoconf for heartbeat
dnl Started by David Lee <T.D.Lee@durham.ac.uk> December 2000
dnl automake stuff
dnl added by Michael Moerz <e9625136@stud3.tuwien.ac.at> February 2001
dnl
dnl License: GNU General Public License (GPL)
dnl Initialiase, with sanity check of a unique file in the hierarchy
AC_INIT(heartbeat.spec.in)
AC_PREREQ(2.53)
AC_CONFIG_AUX_DIR(.)
AC_REVISION($Revision: 1.552 $) dnl cvs revision
AC_CANONICAL_HOST
dnl Where #defines go (e.g. `AC_CHECK_HEADERS' below)
dnl
dnl Internal header: include/config.h
dnl - Contains ALL defines
dnl - include/config.h.in is generated automatically by autoheader
dnl - NOT to be included in any header files except lha_internal.h
dnl (which is also not to be included in any other header files)
dnl
dnl External header: include/hb_config.h
dnl - Contains a subset of defines checked here
dnl - Manually edit include/hb_config.h.in to have configure include
dnl new defines
dnl - Should not include HAVE_* defines
dnl - Safe to include anywhere
AM_CONFIG_HEADER(include/config.h include/hb_config.h)
ALL_LINGUAS="en fr"
AC_ARG_WITH(hapkgversion,
[ --with-hapkgversion=name Override package version (if you're a packager needing to pretend) ],
[ HAPKGVERSION="$withval" ],
[ HAPKGVERSION="" ],
)
if test -z "$HAPKGVERSION" ; then
- HAPKGVERSION="2.1.1"
+ HAPKGVERSION="2.1.2"
fi
AM_INIT_AUTOMAKE(heartbeat, $HAPKGVERSION)
RPMREL=1
AC_SUBST(RPMREL)
HB_PKG=heartbeat
AC_SUBST(HB_PKG)
DISTDIR=$HB_PKG-$VERSION
TARFILE=$DISTDIR.tar.gz
AC_SUBST(DISTDIR)
AC_SUBST(TARFILE)
CC_IN_CONFIGURE=yes
export CC_IN_CONFIGURE
INIT_EXT=""
USE_MODULES=0
echo Our Host OS: $host_os/$host
dnl This OS-based decision-making is poor autotools practice;
dnl feature-based mechanisms are strongly preferred.
dnl
dnl So keep this section to a bare minimum; regard as a "necessary evil".
pf_argv_set=""
case "$host_os" in
*bsd*) LIBS="-L/usr/local/lib"
CPPFLAGS="$CPPFLAGS -I/usr/local/include"
INIT_EXT=".sh"
REBOOT_OPTIONS="-f"
POWEROFF_OPTIONS="-f"
;;
*solaris*)
pf_argv_set="PF_ARGV_NONE"
REBOOT_OPTIONS="-n"
POWEROFF_OPTIONS="-n"
;;
*linux*) USE_MODULES=1
REBOOT_OPTIONS="-nf"
POWEROFF_OPTIONS="-nf"
;;
dnl anything?
darwin*)
AC_DEFINE_UNQUOTED(ON_DARWIN, 1, Compiling for Darwin platform)
LIBS="$LIBS -L${prefix}/lib"
CFLAGS="$CFLAGS -I${prefix}/include"
REBOOT_OPTIONS="-f"
POWEROFF_OPTIONS="-f"
;;
esac
AC_SUBST(INIT_EXT)
AC_SUBST(USE_MODULES)
AC_SUBST(REBOOT_OPTIONS)
AC_SUBST(POWEROFF_OPTIONS)
AC_DEFINE_UNQUOTED(REBOOT_OPTIONS, "$REBOOT_OPTIONS", reboot options)
AC_DEFINE_UNQUOTED(POWEROFF_OPTIONS, "$POWEROFF_OPTIONS", poweroff options)
dnl Info for building/packaging systems.
dnl
dnl "pkg" (typically Solaris) generally suggests package names of the form:
dnl COMPname
dnl where:
dnl COMP: (upper case) resembles a four character company "stock ticker";
dnl name: (lower case) is short-form (few character) product name.
dnl
dnl It is also conventional for the name to be closely related to the
dnl installation location, typically "/opt/COMPname".
dnl
dnl See "linux-ha-dev" discussion, "heartbeat package name", from 12/Oct/2005.
dnl "LXHAhb" seems the least evil compromise for a default.
dnl Any site or packager may, of course, override this.
dnl
AC_ARG_WITH(pkgname,
[ --with-pkgname=name name for pkg (typically for Solaris) ],
[ PKGNAME="$withval" ],
[ PKGNAME="LXHAhb" ],
)
AC_SUBST(PKGNAME)
MISSINGTHINGS=""
MISSINGOPTIONALS=""
FatalMissingThing() {
if test X"$MISSINGTHINGS" = X; then
MISSINGTHINGS="$MISSINGTHINGS $1"
else
MISSINGTHINGS="$MISSINGTHINGS, $1"
fi
shift
AC_MSG_RESULT(configure: ERROR: $1 ====================)
shift
for j in "$@"
do
if test "X$j" != X-; then
AC_MSG_RESULT(configure: $j ==)
fi
done
}
WarnMissingThing() {
if test X"$MISSINGOPTIONALS" = X; then
MISSINGOPTIONALS="$MISSINGOPTIONALS $1"
else
MISSINGOPTIONALS="$MISSINGOPTIONALS, $1"
fi
shift
AC_MSG_RESULT(configure: WARNING: $1 ====================)
shift
for j in "$@"
do
if test "X$j" != X-; then
AC_MSG_RESULT(configure: $j ==)
fi
done
}
CheckMissingThings() {
if
test "X$MISSINGOPTIONALS" != "X"
then
AC_MSG_WARN(The following recommended components noted earlier are missing:
$MISSINGOPTIONALS
We will continue but you may have lost some non-critical functionality.)
fi
if
test "X$MISSINGTHINGS" != "X"
then
AC_MSG_ERROR(The following required components noted earlier are missing:
$MISSINGTHINGS
Please supply them and try again.)
fi
}
dnl
dnl
dnl Don't ya just hate working around buggy code?
dnl
dnl At least code that doesn't do what you want...
dnl
dnl This is to make substitutions work right in RPM specfiles.
dnl
dnl Horms says "This is pretty ugly".
dnl Alanr says: "It works. s/ ugly//"
dnl
dnl Patches are being accepted...
dnl
dnl Keep copy of original (default) prefix
prefix_orig="$prefix"
prefix=`eval echo "$prefix"`
case $prefix in
NONE) prefix=/usr/local;;
esac
var() {
case $1 in
*'${'*) res=`eval echo "$1"`;;
*) res="$1";;
esac
case "$res" in
""|NONE) echo "$2";;
*) echo "$res";;
esac
}
dnl Keep copy of original (default) localstatedir
localstatedir_orig="$localstatedir"
exec_prefix=`var "$exec_prefix" "$prefix"`
bindir=`var "$bindir" "$exec_prefix/bin"`
sbindir=`var "$sbindir" "$exec_prefix/sbin"`
+datarootdir=`var "$datarootdir" "$prefix/share"`
datadir=`var "$datadir" "$prefix/share"`
sysconfdir=`var "$sysconfdir" "$prefix/etc"`
sharedstatedir=`var "$sharedstatedir" "$prefix/com"`
localstatedir=`var "$localstatedir" "$prefix/var"`
includedir=`var "$includedir" "$exec_prefix/include"`
oldincludedir=`var "$oldincludedir" "$exec_prefix/include"`
infodir=`var "$infodir" "$prefix/info"`
mandir=`var "$mandir" "$exec_prefix/man"`
docdir=${datadir}/doc/${HB_PKG}-${VERSION}
libdir=`var "$libdir" "$exec_prefix/lib"`
libexecdir=`var "$libexecdir" "$exec_prefix/libexec"`
noarchlibdir=`var "$noarchlibdir" "$prefix/lib"`
for var in libdir libexecdir
do
dir=`eval echo '${'${var}'}'`
case $dir in
*64) if
test ! -d "$dir"
then
newdir=`echo "$dir" | sed 's%64$%%'`
if
test -d "$newdir"
then
eval $var="$newdir"
AC_MSG_WARN([$var value now set to $newdir since $dir doesn't exist])
fi
fi;;
esac
done
for j in exec_prefix bindir sbindir datadir sysconfdir localstatedir \
includedir oldincludedir mandir docdir libdir noarchlibdir
do
dirname=`eval echo '${'${j}'}'`
if
test ! -d "$dirname"
then
AC_MSG_WARN([$j directory ($dirname) does not exist!])
fi
done
dnl The GNU conventions for installation directories don't always
dnl sit well with this software. In particular, GNU's stated:
dnl
dnl '$(localstatedir)' should normally be '/usr/local/var', ...
dnl
dnl is poor for us: much better would be somewhere under '/var'.
dnl
dnl Here within "configure" it would be poor practice for us to interfere
dnl with such values, irrespective of our opinion:
dnl 1. user perspective: we would have gone behind their back;
dnl 2. autoconf perspective: autoconf should avoid any OS-specific mindset.
dnl
dnl So if localstatedir still has its default value, we issue an advisory
dnl warning and inform folk of our own "ConfigureMe", which is ideally
dnl suited for setting such aspects (by user, and per-OS).
dnl
dnl [ Another option would be to detect, and to warn of, (post-expansion)
dnl non-"/var/[...]" values: something like:
dnl if test `expr "$localstatedir" : '^/var/.*'` -ge '5' \
dnl -o `expr "$localstatedir" : '^/var.*'` -eq '4'
dnl then <OK> else <WARN> fi
dnl ]
# If original localstatedir had defaulted then sanity-check the result.
if test "x$localstatedir_orig" = 'x${prefix}/var' && # Note quote types
test "x$prefix_orig" = xNONE
then
SNOOZING=10
AC_MSG_WARN(value/default "--localstatedir=$localstatedir" is poor.)
AC_MSG_WARN("/var/something" is strongly recommended.)
AC_MSG_WARN(We also recommend using "ConfigureMe".)
AC_MSG_WARN(Sleeping for $SNOOZING seconds.)
sleep $SNOOZING
fi
AC_DEFINE_UNQUOTED(HA_SYSCONFDIR, "$sysconfdir", Location of system configuration files)
HA_URLBASE="http://linux-ha.org/"
AC_SUBST(HA_URLBASE)
AC_DEFINE_UNQUOTED(HA_URLBASE, "$HA_URLBASE", Web site base URL)
HA_LIBDIR="${libdir}"
AC_SUBST(HA_LIBDIR)
AC_DEFINE_UNQUOTED(HA_LIBDIR,"$HA_LIBDIR", lib directory)
-HA_NOARCHLIBDIR="${noarchlibdir}"
-AC_SUBST(HA_NOARCHLIBDIR)
-AC_DEFINE_UNQUOTED(HA_NOARCHLIBDIR,"$HA_NOARCHLIBDIR", noarch lib directory)
+HA_DATADIR="${datadir}"
+AC_SUBST(HA_DATADIR)
+AC_DEFINE_UNQUOTED(HA_DATADIR,"$HA_DATADIR", data (arch-independent) directory)
+
+HA_NOARCHDATAHBDIR="$HA_DATADIR/${HB_PKG}"
+AC_SUBST(HA_NOARCHDATAHBDIR)
+AC_DEFINE_UNQUOTED(HA_NOARCHDATAHBDIR,"$HA_NOARCHDATAHBDIR", $HB_PKG noarch data directory)
HA_LIBHBDIR="$HA_LIBDIR/${HB_PKG}"
AC_SUBST(HA_LIBHBDIR)
AC_DEFINE_UNQUOTED(HA_LIBHBDIR,"$HA_LIBHBDIR", $HB_PKG lib directory)
-HA_NOARCHLIBHBDIR="$HA_NOARCHLIBDIR/${HB_PKG}"
-AC_SUBST(HA_NOARCHLIBHBDIR)
-AC_DEFINE_UNQUOTED(HA_NOARCHLIBHBDIR,"$HA_NOARCHLIBHBDIR", $HB_PKG noarch lib directory)
HA_VARRUNDIR="${localstatedir}/run"
AC_SUBST(HA_VARRUNDIR)
AC_DEFINE_UNQUOTED(HA_VARRUNDIR,"$HA_VARRUNDIR", var run directory)
HA_VARRUNHBDIR="$HA_VARRUNDIR/${HB_PKG}"
AC_SUBST(HA_VARRUNHBDIR)
AC_DEFINE_UNQUOTED(HA_VARRUNHBDIR,"$HA_VARRUNHBDIR", var run heartbeat directory)
HA_VARRUNHBRSCDIR="$HA_VARRUNHBDIR/rsctmp"
AC_SUBST(HA_VARRUNHBRSCDIR)
AC_DEFINE_UNQUOTED(HA_VARRUNHBRSCDIR,"$HA_VARRUNHBRSCDIR", var run heartbeat rsctmp directory)
dnl Test the default first (priority) and last (to make sure some value is set)
AC_MSG_CHECKING(for the location of the lock directory)
for HA_VARLOCKDIR in ${localstatedir}/lock ${localstatedir}/spool/lock ${localstatedir}/spool/locks ${localstatedir}/lock
do
if
test -d "$HA_VARLOCKDIR"
then
AC_MSG_RESULT($HA_VARLOCKDIR)
break
fi
done
AC_SUBST(HA_VARLOCKDIR)
AC_DEFINE_UNQUOTED(HA_VARLOCKDIR,"$HA_VARLOCKDIR", System lock directory)
HA_VARLIBDIR="${localstatedir}/lib"
AC_SUBST(HA_VARLIBDIR)
AC_DEFINE_UNQUOTED(HA_VARLIBDIR,"$HA_VARLIBDIR", var lib directory)
HA_VARLIBHBDIR="${HA_VARLIBDIR}/${HB_PKG}"
AC_SUBST(HA_VARLIBHBDIR)
AC_DEFINE_UNQUOTED(HA_VARLIBHBDIR,"$HA_VARLIBHBDIR", var lib heartbeat directory)
HA_COREDIR="${HA_VARLIBHBDIR}/cores"
AC_SUBST(HA_COREDIR)
AC_DEFINE_UNQUOTED(HA_COREDIR,"$HA_COREDIR", top directory of area to drop core files in)
HA_LOGDAEMON_IPC="${HA_VARLIBDIR}/log_daemon"
AC_SUBST(HA_LOGDAEMON_IPC)
AC_DEFINE_UNQUOTED(HA_LOGDAEMON_IPC, "$HA_LOGDAEMON_IPC", Logging Daemon IPC socket name)
dnl This IS a default but we should make sure we can override it for any
dnl odd OS requirements.
HA_VARLOGDIR="/var/log"
AC_SUBST(HA_VARLOGDIR)
AC_DEFINE_UNQUOTED(HA_VARLOGDIR,"$HA_VARLOGDIR", var log directory)
STONITHPKG=stonith
AC_SUBST(STONITHPKG)
PILSPKG=pils
AC_SUBST(PILSPKG)
pils_includedir="${includedir}/${PILSPKG}"
pils_plugindir="${libdir}/${PILSPKG}/plugins"
stonith_includedir="${includedir}/${STONITHPKG}"
stonith_plugindir="${libdir}/${STONITHPKG}/plugins"
stonith_ext_plugindir="${stonith_plugindir}/external"
base_includedir="${includedir}"
saf_includedir="${includedir}/saf"
AC_SUBST(pils_includedir)
AC_SUBST(pils_plugindir)
AC_SUBST(stonith_includedir)
AC_SUBST(stonith_plugindir)
AC_SUBST(stonith_ext_plugindir)
AC_DEFINE_UNQUOTED(STONITH_EXT_PLUGINDIR,
"$stonith_ext_plugindir",
directory for the external stonith plugins)
AC_SUBST(base_includedir)
AC_SUBST(saf_includedir)
AC_SUBST(docdir)
#
# Other interesting variables: ${host_vendor} and ${host_os}
# sample values: suse linux
#
dnl We use this in the RPM specfile...
AC_SUBST(ac_configure_args)
dnl *************************************************************************
PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin"
export PATH
dnl checks for programs
dnl
dnl Which C compiler?
dnl Defaults to GNU C compiler if available.
dnl Always tries to set the compiler to ANSI C via options (AM)
dnl Can force other with environment variable "CC".
AC_PROG_CC
AC_PROG_CC_STDC
AC_PROG_YACC
AC_DECL_YYTEXT
AM_PROG_LEX
AM_PATH_PYTHON
AC_LIBTOOL_DLOPEN dnl Enable dlopen support...
AC_LIBLTDL_CONVENIENCE dnl make libltdl a convenience lib
AC_PROG_LIBTOOL
dnl Replacing AC_PROG_LIBTOOL with AC_CHECK_PROG because LIBTOOL
dnl was NOT being expanded all the time thus causing things to fail.
AC_CHECK_PROGS(LIBTOOL, glibtool libtool libtool15 libtool13)
AC_MSG_CHECKING(for glibtool or libtool*)
if test x"${LIBTOOL}" = x""; then
FatalMissingThing "libtool" "You need libtool to build heartbeat." \
"You can get the source from ftp://www.gnu.org/pub/gnu/" \
"or you can locate it via http://www.gnu.org/software/libtool"
else
AC_MSG_RESULT($LIBTOOL has been found.)
fi
AC_CHECK_PROGS(MAKE, gmake make)
AC_MSG_CHECKING(for gmake or make)
if test x"${MAKE}" = x""; then
FatalMissingThing "gmake" "You need gmake to build heartbeat." \
"You can get the source from ftp://www.gnu.org/pub/gnu/" \
"or you can locate it via http://www.gnu.org/software/make/"
else
AC_MSG_RESULT($MAKE has been found.)
fi
AC_SYS_LARGEFILE
AC_PATH_PROGS(HTML2TXT, lynx w3m)
case $HTML2TXT in
*/*) ;;
*) HTML2TXT="";;
esac
AC_PATH_PROGS(POD2MAN, pod2man, pod2man)
AC_PATH_PROGS(ROUTE, route)
AC_PATH_PROGS(RPM, rpmbuild)
if test x"${RPM}" = x""; then
AC_PATH_PROGS(RPM, rpm)
fi
AC_DEFINE_UNQUOTED(ROUTE, "$ROUTE", path to route command)
AC_PATH_PROGS(NETSTAT, netstat, /sbin/netstat)
AC_DEFINE_UNQUOTED(NETSTAT, "$NETSTAT", path to the netstat command)
AC_PATH_PROGS(PING, ping, /bin/ping)
AC_PATH_PROGS(IFCONFIG, ifconfig, /sbin/ifconfig)
AC_PATH_PROGS(SSH, ssh, /usr/bin/ssh)
AC_PATH_PROGS(SCP, scp, /usr/bin/scp)
AC_PATH_PROGS(PYTHON, python)
dnl - Determine which mail program exists. Mailx is Solaris
AC_PATH_PROGS(MAILCMD, mail, mailx)
AC_SUBST(MAILCMD)
AC_DEFINE_UNQUOTED(IFCONFIG, "$IFCONFIG", path to the ifconfig command)
AC_PATH_PROGS(LIBNETCONFIG, libnet-config)
AC_PATH_PROGS(GETENT, getent)
AC_PATH_PROGS(IP2UTIL, ip, /sbin/ip)
AC_PATH_PROGS(XML2CONFIG, xml2-config)
AC_PATH_PROGS(REBOOT, reboot, /sbin/reboot)
AC_PATH_PROGS(POWEROFF_CMD, poweroff, /sbin/poweroff)
AC_SUBST(REBOOT)
AC_SUBST(POWEROFF_CMD)
AC_DEFINE_UNQUOTED(REBOOT, "$REBOOT", path to the reboot command)
AC_DEFINE_UNQUOTED(POWEROFF_CMD, "$POWEROFF_CMD", path to the poweroff command)
dnl "whoami", if it exists, may be hidden away on some System-V (e.g. Solaris)
AC_PATH_PROGS(WHOAMI, whoami, , ${PATH}:/usr/ucb)
AC_PATH_PROGS(SWIG, swig)
AC_SUBST(SWIG)
AC_PATH_PROGS(EGREP, egrep)
AC_SUBST(EGREP)
AC_PATH_PROGS(MSGFMT, msgfmt, [msgfmt not found],)
AC_SUBST(MSGFMT)
AC_PATH_PROGS(HG, hg, /usr/local/hg)
AC_SUBST(HG)
AC_PATH_PROGS(GZIP_PROG, gzip)
AC_PATH_PROGS(TAR, tar)
AC_PATH_PROGS(MD5, md5)
AC_SUBST(GZIP_PROG)
AC_SUBST(TAR)
AC_SUBST(MD5)
dnl The "test" program can be different from the "sh" builtin.
AC_PATH_PROGS(TEST, test)
AC_PATH_PROGS(PKGCONFIG, pkg-config)
dnl ************************************************************************
dnl Check whether non-root user can chown.
dnl ************************************************************************
AC_PATH_PROGS(MKTEMP, mktemp)
if test -n "$WHOAMI"; then
IAM=`$WHOAMI`
fi
AC_MSG_CHECKING(if chown works for non-root)
dnl Prefer "mktemp" command. But some OSes lack it; they can "touch".
if test -n "$MKTEMP"; then
F=`$MKTEMP "./.chown-testXXXXX"`
else
F="./.chown-test.$$"
touch $F
fi
if
case "$IAM" in
root) chown nobody $F;
su nobody -c "chown root $F";;
*) chown root $F
esac >/dev/null 2>&1
then
nonroot_chown=yes
AC_MSG_RESULT(yes)
else
nonroot_chown=no
AC_MSG_RESULT(no)
fi
rm -f $F
AM_CONDITIONAL(NONROOT_CHOWN, test "$nonroot_chown" = yes )
dnl ************************************************************************
dnl checks for libraries
dnl Needed for libnet test.
dnl ************************************************************************
AC_CHECK_LIB(nsl, t_open) dnl -lnsl
AC_CHECK_LIB(socket, socket) dnl -lsocket
AC_CHECK_LIB(posix4, sched_getscheduler) dnl -lposix4
AC_CHECK_LIB(c, dlopen) dnl if dlopen is in libc...
AC_CHECK_LIB(dl, dlopen) dnl -ldl (for Linux)
AC_CHECK_LIB(rt, sched_getscheduler) dnl -lrt (for Tru64)
AC_CHECK_LIB(gnugetopt, getopt_long) dnl -lgnugetopt ( if available )
AC_CHECK_LIB(pam, pam_start) dnl -lpam (if available)
# Not sure what OSes need this... Linux and AIX don't...
# and AIX barfs on it...
if test "$DLPREOPEN" = yes; then
DLOPEN_FORCE_FLAGS="-dlpreopen force -dlopen-self"
AC_DEFINE(DLPREOPEN, 1, [enable -dlpreopen flag])
else
DLOPEN_FORCE_FLAGS=""
fi
AC_SUBST(DLOPEN_FORCE_FLAGS)
dnl ************ uuid **********************
AC_ARG_WITH(uuid,
[ --with-uuid=UUID mechanism for uuid {e2fsprogs|ossp|any|no}
"e2fsprogs": e2fsprogs, typically Linux
"ossp": not yet implemented
"any": (default) any of the above, fallback to inbuilt
"no": use inbuilt ],
[ uuidimpl="$withval" ],
[ uuidimpl="any" ],
)
case $uuidimpl in
e2fsprogs)
AC_CHECK_LIB(uuid, uuid_parse,,
AC_MSG_ERROR([e2fsprogs uuid library was explicitly requested but not found])
)
;;
ossp)
AC_CHECK_LIB(uuid, uuid_create,,
AC_MSG_ERROR([ossp uuid library was explicitly requested but not found])
)
;;
no) # Do not define anything; so use inbuilt (replace) implementation.
;;
any) # Default: try to discover an implementation that we can use.
AC_CHECK_LIB(uuid, uuid_parse) dnl e2fsprogs
dnl AC_CHECK_LIB(uuid, uuid_create) dnl ossp
;;
*)
AC_MSG_ERROR([An invalid uuid library was explicitly requested])
;;
esac
case "$host_os" in
darwin*)
dnl Recent Darwin versions do not need to link against a uuid library
dnl Maybe this can be moved up into the previous block but it also might
dnl break things (ie. the later check for uuid_parse)
AC_CHECK_FUNCS(uuid_parse)
esac
AC_MSG_CHECKING(uuid implementation:)
if test "$ac_cv_lib_uuid_uuid_parse" = yes; then
AC_MSG_RESULT(e2fsprogs)
elif test "$ac_cv_func_uuid_parse" = yes; then
AC_MSG_RESULT(native)
elif test "$ac_cv_lib_uuid_uuid_create" = yes; then
AC_MSG_RESULT(ossp)
AC_MSG_ERROR([heartbeat does not yet support ossp implementation of uuid])
else
AC_MSG_RESULT(inbuilt)
if test x"$uuidimpl" != x"no"; then
WarnMissingThing "uuid library" \
"e2fsprogs uuid library is recommended" \
"On Linux this is the e2fsprogs-devel package" \
"See also http://sourceforge.net/projects/e2fsprogs/"
fi
fi
dnl ************ uuid **********************
EXTRAGLIBMSG="-"
if test "X${PKGCONFIG}" = "X"; then
AC_MSG_RESULT(not found)
FatalMissingThing "pkgconfig" "Package pkgconfig is required" \
"See http://pkgconfig.sourceforge.net/"
EXTRALIBMSG="(this message might be bogus because pkgconfig is missing)"
fi
if test "x${enable_thread_safe}" = "xyes"; then
GPKGNAME="gthread-2.0"
else
GPKGNAME="glib-2.0"
fi
if test "X${PKGCONFIG}" != "X" && $PKGCONFIG --exists $GPKGNAME; then
GLIBCONFIG="$PKGCONFIG $GPKGNAME"
else
set -x
echo PKG_CONFIG_PATH=$PKG_CONFIG_PATH
$PKGCONFIG --exists $GPKGNAME; echo $?
$PKGCONFIG --cflags $GPKGNAME; echo $?
$PKGCONFIG $GPKGNAME; echo $?
set +x
FatalMissingThing "glib2-devel" \
"Package glib2-devel is missing." \
"You can get the source from ftp://ftp.gtk.org/pub/gtk/" \
"or you can locate it via http://www.gtk.org/download/" "$EXTRALIBMSG"
fi
AC_MSG_RESULT(using $GLIBCONFIG)
AC_MSG_CHECKING(which libnet version is installed)
if test x"${LIBNETCONFIG}" = x""; then
AC_MSG_RESULT(using old version of API)
dnl The old version of the API REQUIRES $LIBNETCONFIG
dnl so we can only deal with new API unless we have it.
AC_CHECK_LIB(net, libnet_get_hwaddr, [],
[FatalMissingThing "libnet" "You need libnet to continue." \
"You can get libnet from http://www.packetfactory.net/libnet" \
"Note that some RPMs split libnet up into libnet and libnet-devel." \
"In this case you have to install libnet-devel"])
LIBNETDEFINES=""
LIBNETLIBS=" -lnet"
if test "$ac_cv_lib_nsl_t_open" = yes; then
LIBNETLIBS="-lnsl $LIBNETLIBS"
fi
if test "$ac_cv_lib_socket_socket" = yes; then
LIBNETLIBS="-lsocket $LIBNETLIBS"
fi
libnet=net
else
LIBNETDEFINES="`$LIBNETCONFIG --defines` `$LIBNETCONFIG --cflags`";
LIBNETLIBS="`$LIBNETCONFIG --libs`";
AC_MSG_RESULT(using $LIBNETCONFIG)
case $LIBNETLIBS in
*-l*) libnet=`echo $LIBNETLIBS | sed 's%.*-l%%'`;;
*) libnet=$LIBNETLIBS;;
esac
dnl Add any libnet definitions to the compiler flags.
CPPFLAGS="$CPPFLAGS $LIBNETDEFINES"
AC_CHECK_HEADERS(libnet.h)
if test "$ac_cv_header_libnet_h" = no; then
FatalMissingThing "libnet" "You need libnet (headers) to continue." \
"You can get libnet from http://www.packetfactory.net/libnet" \
"Note that some RPMs split libnet up into libnet and libnet-devel." \
"In this case you have to install libnet-devel"
fi
fi
AC_SUBST(LIBNETDEFINES)
AC_SUBST(LIBNETLIBS)
AC_CHECK_LIB($libnet,libnet_init,
[new_libnet=yes; AC_DEFINE(HAVE_LIBNET_1_1_API, 1, Libnet 1.1 API)],
[new_libnet=no; AC_DEFINE(HAVE_LIBNET_1_0_API, 1, Libnet 1.0 API)],$LIBNETLIBS)
AC_MSG_CHECKING(where is python installed)
if test "x${PYTHON}" = x; then
PYTHON="/usr/bin/env python";
fi
AC_MSG_RESULT(using $PYTHON);
AC_MSG_CHECKING(if netstat supports -f inet flag)
$NETSTAT -rn -f inet > /dev/null 2>&1
if test x"$?" = x"0"; then
AC_DEFINE(NETSTATPARM, "-rn -f inet ", parameters to netstat to retrieve route information)
AC_MSG_RESULT(yes)
else
AC_DEFINE(NETSTATPARM, "-rn ", parameters to netstat to retrieve route information)
AC_MSG_RESULT(no)
fi
if test X${PING} = X
then
FatalMissingThing "ping" "ping command is mandantory"
fi
dnl Determine if we use -w1 or -t1 for ping (in PYTHON Scripts)
AC_MSG_CHECKING(ping option for timeout - w or t)
for PING_TIMEOUT_OPT in "-w1" "-t1"
do
$PING -nq -c1 $PING_TIMEOUT_OPT localhost > /dev/null 2>&1
if
test "$?" = 0
then
AC_DEFINE_UNQUOTED(PING_TIMEOUT_OPT, "$PING_TIMEOUT_OPT", option for ping timeout)
AC_MSG_RESULT($PING_TIMEOUT_OPT)
break
fi
done
AC_SUBST(PING_TIMEOUT_OPT)
dnl Determining a route (particularly for "findif").
dnl There are various mechanisms on different systems.
dnl Some mechanisms require root access to evaluate, but configure is often
dnl (indeed, some say should be always) running non-root.
dnl
dnl Therefore much of the determination has to be run-time.
dnl So the principle here, at configure time, is to explore what might be
dnl available, and offer as much as possible to run-time.
dnl
AC_DEFINE(ROUTEPARM, "-n get", paramters for route to retrieve route information)
AC_DEFINE(PROCROUTE, "/proc/net/route", path were to find route information in proc)
AC_MSG_CHECKING(ifconfig option to list interfaces)
for IFCONFIG_A_OPT in "" "-A" "-a"
do
$IFCONFIG $IFCONFIG_A_OPT > /dev/null 2>&1
if
test "$?" = 0
then
AC_DEFINE_UNQUOTED(IFCONFIG_A_OPT, "$IFCONFIG_A_OPT", option for ifconfig command)
AC_MSG_RESULT($IFCONFIG_A_OPT)
break
fi
done
AC_SUBST(IFCONFIG_A_OPT)
AC_SUBST(WHOAMI)
AC_SUBST(HTML2TXT)
AC_SUBST(POD2MAN)
AC_SUBST(ROUTEPARM)
AC_SUBST(PROCROUTE)
dnl Locales check - is a real ugly workaround for now til I find
dnl something more useful
dnl
dnl "Eric Z. Ayers" wrote:
dnl >
dnl > Here are some more data points:
dnl >
dnl > SUN: /usr/lib/locale/
dnl > HP : /usr/lib/nls/loc/
dnl > OSF: /usr/lib/nls/loc/
dnl > LINUX: /usr/share/locale/
dnl > UNIXWARE: /usr/lib/locale/
dnl > FREEBSD: /usr/share/locale
dnl > VMS: just kidding
dnl
FindADir() {
type="$1"
whatfor="$2"
shift; shift;
AC_MSG_CHECKING(for $whatfor directory)
for dir
do
if
test -d "$dir"
then
AC_MSG_RESULT($dir)
echo $dir
return 0
fi
done
AC_MSG_RESULT(not found)
return 1
}
locale_locations="/usr/share/locale /usr/lib/locale /usr/lib/nls/loc"
LOCALE=`FindADir error "locale" $locale_locations`
if
test "X$LOCALE" = X
then
FatalMissingThing "Locale directory" "Locale directory is mandantory."
fi
RPMDIR=`FindADir warn "RPM" /usr/src/packages /usr/src/redhat`
if test x"${HAVE_LIBRT}" = x""; then
LIBRT=""
else
LIBRT=-lrt
fi
AC_SUBST(LIBRT)
#
# Where is dlopen?
#
if test "$ac_cv_lib_c_dlopen" = yes; then
LIBADD_DL=""
elif test "$ac_cv_lib_dl_dlopen" = yes; then
LIBADD_DL=-ldl
else
LIBADD_DL=${lt_cv_dlopen_libs}
fi
dnl
dnl Check for location of gettext
dnl
dnl On at least Solaris 2.x, where it is in libc, specifying lintl causes
dnl grief. Ensure minimal result, not the sum of all possibilities.
dnl And do libc first.
dnl Known examples:
dnl c: Linux, Solaris 2.6+
dnl intl: BSD, AIX
FunIsInLib() {
fun=$1
lib=$2
lib_var1="ac_cv_lib_${lib}_$fun"
lib_var2="ac_cv_lib_${lib}___$fun"
for v in $lib_var1 $lib_var2
do
var=`eval echo '${'${v}'}'`
case $var in
yes) return 0;;
no) return 1;;
esac
done
return 0
}
for gt_test_lib in c intl
do
AC_CHECK_LIB($gt_test_lib, gettext)
if FunIsInLib gettext $gt_test_lib; then
break
fi
done
#
# Where is gettext()?
#
if FunIsInLib gettext c ; then
LIBADD_INTL=""
elif FunIsInLib gettext intl ; then
LIBADD_INTL=-lintl
elif test -f /usr/local/lib/libintl.so -a -s /usr/local/lib/libintl.so; then
# This was added for FreeBSD
LIBADD_INTL="-lintl"
elif test -f /sw/lib/libintl.a -a -s /sw/lib/libintl.la -a -s /sw/lib/libintl.dylib; then
# This was added for Darwin + Fink
LIBADD_INTL="-lintl"
else
FatalMissingThing "gettext function" "no library providing gettext found"
fi
dnl
dnl Glib allows its headers/libraries to be installed anywhere.
dnl And they provide a command to let you know where they are.
dnl This is nice, but having them in standard places is nice too ;-)
dnl
if test "X$GLIBCONFIG" != X; then
AC_MSG_CHECKING(for special glib includes: )
GLIBHEAD=`$GLIBCONFIG --cflags`
AC_MSG_RESULT($GLIBHEAD)
CPPFLAGS="$CPPFLAGS $GLIBHEAD"
AC_SUBST(GLIBHEAD)
dnl Note: Not bundling "GLIBLIB" with general "LIBS".
dnl 1. Only very few programs require GLIBLIB
dnl (This isn't true anymore -- AlanR)
dnl 2. Danger of creating run-time dependency on build-time LD_LIBRARY_PATH
AC_MSG_CHECKING(for glib library flags)
GLIBLIB=`$GLIBCONFIG --libs`
AC_MSG_RESULT($GLIBLIB)
AC_SUBST(GLIBLIB)
fi
dnl ************************************************************************
dnl checks for header files
dnl
dnl check for ANSI *.h files first
dnl asm/page.h: Linux, for system PAGE_SIZE
AC_HEADER_STDC
AC_CHECK_HEADERS(db.h)
AC_CHECK_HEADERS(asm/page.h)
AC_CHECK_HEADERS(time.h)
AC_CHECK_HEADERS(stdarg.h)
AC_CHECK_HEADERS(tcpd.h)
AC_CHECK_HEADERS(uuid.h)
AC_CHECK_HEADERS(uuid/uuid.h)
AC_CHECK_HEADERS(sys/param.h)
AC_CHECK_HEADERS(netinet/in.h)
AC_CHECK_HEADERS([stdint.h unistd.h])
AC_CHECK_HEADERS(sys/termios.h)
AC_CHECK_HEADERS(termios.h)
dnl ************************************************************************
dnl FreeBSD requires sys/param.h and in.h to compile test netinet headers.
dnl ************************************************************************
if test "$ac_cv_header_sys_param_h" -a "$ac_cv_header_netinet_in_h" = no; then
AC_CHECK_HEADERS(netinet/in_systm.h)
AC_CHECK_HEADERS(netinet/ip.h)
AC_CHECK_HEADERS(netinet/ip_var.h)
AC_CHECK_HEADERS(netinet/ip_compat.h)
AC_CHECK_HEADERS(netinet/ip_fw.h)
else
AC_CHECK_HEADERS(netinet/in_systm.h,[],[],[#include <sys/param.h>
#include <netinet/in.h>])
if test "$ac_cv_header_in_systm_h" = no; then
AC_CHECK_HEADERS(netinet/ip.h,[],[],[#include <sys/param.h>
#include <netinet/in.h>])
else
AC_CHECK_HEADERS(netinet/ip.h,[],[],[#include <sys/param.h>
#include <netinet/in_systm.h>
#include <netinet/in.h>])
fi
AC_CHECK_HEADERS(netinet/ip_var.h,[],[],[#include <sys/param.h>
#include <netinet/in.h>])
AC_CHECK_HEADERS(netinet/ip_compat.h,[],[],[#include <sys/param.h>
#include <netinet/in.h>])
AC_CHECK_HEADERS(netinet/ip_fw.h,[],[],[#include <sys/param.h>
#include <netinet/in.h>])
fi
AC_CHECK_HEADERS(sys/sockio.h)
AC_CHECK_HEADERS(libintl.h)
AC_CHECK_HEADERS(sys/types.h)
AC_CHECK_HEADERS(sys/socket.h)
AC_CHECK_HEADERS(arpa/inet.h)
AC_CHECK_HEADERS(net/ethernet.h)
AC_CHECK_HEADERS(malloc.h)
AC_CHECK_HEADERS(termio.h)
AC_CHECK_HEADERS(getopt.h)
AC_CHECK_HEADERS(sys/prctl.h)
AC_CHECK_HEADERS(linux/watchdog.h,[],[],[#include <linux/types.h>])
dnl Sockets are our preferred and supported comms mechanism. But the
dnl implementation needs to be able to convey credentials: some don't.
dnl So on a few OSes, credentials-carrying streams might be a better choice.
dnl
dnl Solaris releases up to and including "9" fall into this category
dnl (its sockets don't carry credentials; streams do).
dnl
dnl At Solaris 10, "getpeerucred()" is available, for both sockets and
dnl streams, so it should probably use (preferred) socket mechanism.
AC_CHECK_HEADERS(stropts.h) dnl streams available (fallback option)
AC_CHECK_HEADERS(ucred.h) dnl e.g. Solaris 10 decl. of "getpeerucred()"
AC_CHECK_FUNCS(getpeerucred)
dnl ************************************************************************
dnl checks for headers needed by clplumbing On BSD
AC_CHECK_HEADERS(sys/syslimits.h)
if test "$ac_cv_header_sys_param_h" = no; then
AC_CHECK_HEADERS(sys/ucred.h)
else
AC_CHECK_HEADERS(sys/ucred.h,[],[],[#include <sys/param.h>])
fi
dnl ************************************************************************
dnl checks for headers needed by clplumbing On Solaris
AC_CHECK_HEADERS(sys/cred.h xti.h)
dnl ************************************************************************
dnl checks for headers needed by clplumbing On FreeBSD/Solaris
AC_CHECK_HEADERS(sys/filio.h)
dnl
dnl These next two are used to help us figure out whether to include
dnl some optional STONITH plugins...
dnl
AC_CHECK_HEADERS(vacmclient_api.h)
AC_CHECK_HEADERS(curl/curl.h)
AC_CHECK_HEADERS(openhpi/SaHpi.h)
AC_MSG_CHECKING(For libOpenIPMI version 2 or greater)
AC_TRY_COMPILE([#include <OpenIPMI/ipmiif.h>],
[ #if (OPENIPMI_VERSION_MAJOR < 2 )
#error "Too Old"
#endif ],
AC_MSG_RESULT("yes")
AM_CONDITIONAL(USE_OPENIPMI, true),
AC_MSG_RESULT("no")
AM_CONDITIONAL(USE_OPENIPMI, false))
AC_MSG_CHECKING(for special libxml2 includes)
if test "x$XML2CONFIG" = "x"; then
AC_MSG_RESULT(libxml2 config not found)
else
XML2HEAD=`$XML2CONFIG --cflags`
AC_MSG_RESULT($XML2HEAD)
AC_CHECK_LIB(xml2, xmlReadMemory)
fi
CPPFLAGS="$CPPFLAGS $XML2HEAD"
dnl ************************************************************************
dnl * Check for linux/icmpv6.h to make enable the IPv6addr resource agent
-AC_CHECK_HEADERS(linux/icmpv6.h,[],[],[#include <sys/types.h>])
+AC_CHECK_HEADERS(linux/icmpv6.h,[],[],[#include <asm/types.h>])
AM_CONDITIONAL(USE_IPV6ADDR, test "$ac_cv_header_linux_icmpv6_h" = yes -a $new_libnet = yes )
AC_CHECK_HEADERS(libxml/xpath.h)
dnl
dnl Could check for the libraries, but if you have the headers,
dnl you're a dolt for not having installed the libs ;-)
dnl
AM_CONDITIONAL(USE_VACM, test "$ac_cv_header_vacmclient_api_h" = yes)
AM_CONDITIONAL(USE_DRAC3, test "$ac_cv_header_curl_curl_h" = yes -a "$ac_cv_header_libxml_xpath_h" = yes)
AM_CONDITIONAL(USE_OPENHPI, test "$ac_cv_header_openhpi_SaHpi_h" = yes)
dnl
dnl SNMP checks
dnl
SNMPLIB=""
SNMPAGENTLIB=""
SNMPCONFIG=""
ENABLE_SNMP="yes"
if test "x${enable_snmp}" = "xno"; then
ENABLE_SNMP="no"
enable_snmp_subagent="no"
fi
AC_CHECK_HEADERS(ucd-snmp/snmp.h,[],[],[#include <sys/types.h>
#include <ucd-snmp/asn1.h>])
AC_CHECK_HEADERS(net-snmp/net-snmp-config.h)
if test "x${ENABLE_SNMP}" = "xno"; then
# nothing
:
elif test "x${ac_cv_header_net_snmp_net_snmp_config_h}" = "xyes"; then
AC_PATH_PROGS(SNMPCONFIG, net-snmp-config)
if test "X${SNMPCONFIG}" = "X"; then
AC_MSG_RESULT(You need the net_snmp development package to continue.)
ENABLE_SNMP="no"
else
AC_MSG_CHECKING(for special snmp libraries)
SNMPLIB=`net-snmp-config --libs`
SNMPAGENTLIB=`net-snmp-config --agent-libs`
# KLUDGE!!
# Apparently some versions of SUSE Linux don't include -lwrap in $SNMPAGENTLIB
case $SNMPAGENTLIB in
*wrap*) ;;
*) SNMPAGENTLIB="$SNMPAGENTLIB -lwrap";;
esac
AC_MSG_RESULT($SNMPLIB)
fi
elif test "x${ac_cv_header_ucd_snmp_snmp_h}" = "xyes"; then
# UCD SNMP
# ucd-snmp-config does not seem to exist, so just
# rely on people having their LDFLAGS set to the path where
AC_CHECK_LIB(snmp, init_snmp, SNMPLIB="-lsnmp")
if test "X${SNMPLIB}" = "X"; then
AC_CHECK_LIB(ucdsnmp, init_snmp, SNMPLIB="-lucdsnmp")
fi
SNMPAGENTLIB="$SNMPLIB"
if test "X${SNMPLIB}" = "X"; then
ENABLE_SNMP="no"
AC_MSG_RESULT("Could not find ucdsnmp libary."
"Please make sure that libsnmp or libucdsnmp"
"are in your library path. Or the path to LDFLAGS")
fi
else
ENABLE_SNMP="no"
fi
if test "$ENABLE_SNMP" = "no" -a "x${enable_snmp_subagent}" = "xyes"; then
FatalMissingThing "SNMP Development package" "Missing SNMP development libraries and/or headers" "" "Install net-snmp-devel to enable SNMP features"
fi
if test "$ENABLE_SNMP" = "no" -o "x${enable_snmp_subagent}" != "xyes"; then
enable_snmp_subagent="no"
RPM_ENABLE_SNMP_SUBAGENT="0"
else
RPM_ENABLE_SNMP_SUBAGENT="1"
fi
check_snmp_libs ()
{
OLDLIBS="$LIBS"
LIBS="$LIBS $@"
AC_MSG_CHECKING(snmp libraries: $LIBS)
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])], ,
AC_MSG_ERROR(cannot link with requested libraries ($LIBS). Reported errors follow:
$(cat conftest.err)))
AC_MSG_RESULT(ok)
LIBS="$OLDLIBS"
}
if test "$ENABLE_SNMP" = "yes"; then
check_snmp_libs $SNMPLIB
fi
if test "$enable_snmp_subagent" = "yes"; then
check_snmp_libs $SNMPAGENTLIB
fi
AC_ARG_WITH(mibsdir,
[ --with-miBsdir=DIR directory for mib files. ],
[ MIBS_DIR="$withval" ])
if test "x${enable_snmp_subagent}" = "xyes" -a "X${MIBS_DIR}" = "X"; then
AC_MSG_CHECKING(which MIB directory to use)
for mibs_dir in /usr/share/snmp/mibs \
/usr/local/share/snmp/mibs; do
if test -d "$mibs_dir"; then
MIBS_DIR="$mibs_dir"
fi
done
if test "X${MIBS_DIR}" = "X"; then
AC_MSG_ERROR(Could not find mibs directory,
please specify with --with-mibsdir);
fi
AC_MSG_RESULT($MIBS_DIR);
fi
AC_SUBST(MIBS_DIR)
AC_SUBST(SNMPCONFIG)
AC_SUBST(SNMPLIB)
AC_SUBST(SNMPAGENTLIB)
AC_SUBST(RPM_ENABLE_SNMP_SUBAGENT)
AM_CONDITIONAL(USE_APC_SNMP, test "$ENABLE_SNMP" = "yes")
AM_CONDITIONAL(SNMP_SUBAGENT_BUILD, test "x${enable_snmp_subagent}" = "xyes")
if test x"$VERSION" \> x"1.9"; then
AC_DEFINE(HAVE_NEW_HB_API, 1, [have new heartbeat api])
fi
dnl
dnl On many systems libcrypto is needed when linking against libsnmp.
dnl Check to see if it exists, and if so use it.
dnl
AC_CHECK_LIB(crypto, CRYPTO_free, CRYPTOLIB="-lcrypto",)
AC_SUBST(CRYPTOLIB)
dnl ***************************************************************************
dnl TIPC communication module
dnl ***************************************************************************
AC_ARG_ENABLE([tipc],
[ --enable-tipc Enable TIPC Communication module,
[default=try]], [], [enable_tipc=try])
AC_ARG_WITH([tipc],
[ --with-tipc-source TIPC source code directory], [], [])
TIPC_DEV_ROOT=${with_tipc_source}
tipc_headers_found=yes
if test "x${TIPC_DEV_ROOT}" != "x"; then
dnl checking tipc.h in specified directory
TIPC_HEADER_DIR=${TIPC_DEV_ROOT}/include
AC_CHECK_HEADER([${TIPC_HEADER_DIR}/net/tipc/tipc.h], [], \
[tipc_headers_found=no] )
TIPC_INCLUDE="-I${TIPC_HEADER_DIR}"
else
dnl checking tipc.h in standard include directory
AC_CHECK_HEADERS(net/tipc/tipc.h, [], [tipc_headers_found=no])
fi
AC_SUBST(TIPC_INCLUDE)
AM_CONDITIONAL(BUILD_TIPC_MODULE,
test "x${tipc_headers_found}" = "xyes" && test "x${enable_tipc}" != "xno")
dnl ***************************************************************************
dnl CIM provider configuration
dnl ***************************************************************************
AC_ARG_ENABLE([cim-provider],
[ --enable-cim-provider Enable CIM providers.
[default=no]])
AC_ARG_WITH([cimom],
[ --with-cimom Specify CIM server], [], [])
AC_ARG_WITH([cmpiheader],
[ --with-cmpi-headers Specify CMPI header files], [], [])
AC_ARG_WITH([cmpiprovider],
[ --with-provider-dir Specify CMPI providers directory], [], [])
CMPI_HEADER_PATH=${with_cmpi_headers}
CIMOM=${with_cimom}
CMPI_PROVIDER_DIR=${with_provider_dir}
if test "x${enable_cim_provider}" != "xyes"; then
enable_cim_provider="no"
fi
if test "x${CIMOM}" = "x"; then
if test "x${CIMOM}" = "x"; then
AC_CHECK_PROG([CIMOM], [cimserver], [pegasus])
fi
if test "x${CIMOM}" = "x"; then
AC_CHECK_PROG([CIMOM], [sfcbd], [sfcb])
fi
if test "x${CIMOM}" = "x"; then
AC_CHECK_PROG([CIMOM], [owcimomd], [openwbem])
fi
if test "x${CIMOM}" = "x"; then
AC_MSG_WARN([Cimom not found, MOF will not be installed!])
fi
fi
if test "x${enable_cim_provider}" = "xyes"; then
if test "x${CMPI_HEADER_PATH}" != "x"; then
CPPFLAGS="$CPPFLAGS -I${CMPI_HEADER_PATH}"
fi
for header in cmpidt.h cmpift.h cmpimacs.h
do
AC_CHECK_HEADER([${header}], [],
[AC_MSG_ERROR([Sorry, can't find CMPI header files, \
specify CMPI header files with --with-cmpi-headers please.])] )
done
if test "x${CMPI_PROVIDER_DIR}" = "x"; then
case ${CIMOM} in
sfcbd) SFCBD_PREFIX=`which sfcbd`
SFCBD_PREFIX=`dirname ${SFCBD_PREFIX}`
SFCBD_PREFIX=`dirname ${SFCBD_PREFIX}`
CMPI_PROVIDER_DIR=${SFCBD_PREFIX}/lib/cmpi;;
openwbem)
OPENWBEM_PREFIX=`which owcimomd`
OPENWBEM_PREFIX=`dirname ${OPENWBEM_PREFIX}`
OPENWBEM_PREFIX=`dirname ${OPENWBEM_PREFIX}`
OPENWBEM_CONFIG=${OPENWBEM_PREFIX}/etc/openwbem/openwbem.conf
OPENWBEM_CMPI_DIR=`grep -e "cmpiprovifc.prov_location.*=" \
${OPENWBEM_CONFIG} | sed -e 's/.*=\s*\(\.*\)/\1/'`
if test "x${OPENWBEM_CMPI_DIR}" != "x"; then
CMPI_PROVIDER_DIR=${OPENWBEM_CMPI_DIR}
echo cmpi provider dir set, using openwbem config file: \
${OPENWBEM_CONFIG}.
else
CMPI_PROVIDER_DIR=${OPENWBEM_PREFIX}/lib/openwbem/cmpiproviders
echo openwbem config not found, cmpi provider dir set to \
$(CMPI_PROVIDER_DIR) by default.
fi;;
pegasus) CMPI_PROVIDER_DIR=/opt/tog-pegasus/providers/lib;;
*);;
esac
if test x"$CMPI_PROVIDER_DIR" = x ; then
CMPI_PROVIDER_DIR="$libdir"/cmpi
AC_MSG_RESULT(default directory: $CMPI_PROVIDER_DIR)
fi
fi
fi
AM_CONDITIONAL(CIM_PROVIDER_BUILD, test "x${enable_cim_provider}" = "xyes")
AC_SUBST(CMPI_PROVIDER_DIR)
AC_SUBST(CIMOM)
AC_SUBST(CMPI_HEADER_PATH)
dnl ***************************************************************************
dnl Thread safe configuration
dnl ***************************************************************************
AM_CONDITIONAL(ENABLE_THREAD_SAFE, test "x${enable_thread_safe}" = "xyes")
dnl ************************************************************************
dnl Handy function for checking for typedefs or struct defs
dnl ************************************************************************
check_for_type() {
type="$1"
headers=""
shift
for arg
do
headers="${headers}${arg}
"
done
program="if ((${type} *) 0) return 0;
if (sizeof(${type})) return 0;
return 0;"
have="HAVE_`echo "$type" | tr ' ' '_' | dd conv=ucase 2>/dev/null`"
varhave="heartbeat_cv_$have"
AC_CACHE_CHECK([for type $type ],$varhave,[
AC_TRY_COMPILE([$headers], [$program], eval $varhave=yes, eval $varhave=no
, eval $varhave=cross)
])
if test x"`eval echo '${'$varhave'}'`" = xyes; then
return 0
fi
return 1
}
check_for_type_member() {
type="$1"
member="$2"
headers=""
shift
shift
for arg
do
headers="${headers}${arg}
"
done
program="${type} foo;
if ((${type} *) 0) return 0;
if (sizeof(${type})) return 0;
if (sizeof(foo)) return 0;
(void*)foo.${member};
return 0;"
have="HAVE_`echo "$type" | tr ' ' '_' | dd conv=ucase 2>/dev/null`"
varhave="heartbeat_cv_$have"
AC_CACHE_CHECK([for type $type ],$varhave,[
AC_TRY_COMPILE([$headers], [$program], eval $varhave=yes, eval $varhave=no
, eval $varhave=cross)
])
if test x"`eval echo '${'$varhave'}'`" = xyes; then
return 0
fi
return 1
}
dnl ************************************************************************
dnl checks for typedefs
dnl
dnl if not known on this system, #define size_t unsigned
AC_TYPE_SIZE_T
dnl
dnl Check poll.h for nfds_t (Linux Only), if not define it as an unsigned long int.
dnl
if check_for_type "nfds_t" "#include <poll.h>"; then
AC_DEFINE(HAVE_NFDS_T,1,[Do we have nfds_t?])
fi
dnl ************************************************************************
dnl checks for structures
dnl
#
# Look for all the variants of local/UNIX socket credentials
#
# Include all of these headers that we can find...
#
headers=""
for hdr in "sys/param.h" "sys/socket.h" "sys/ucred.h"
do
hdrvar=ac_cv_header_`echo $hdr | sed -e 's%\.%_%' -e 's%/%_%'`
if test x"`eval echo '${'$hdrvar'}'`" = xyes; then
headers="$headers
#include <$hdr>"
fi
done
if check_for_type_member "struct ucred" "cr_ref" "$headers"; then
AC_DEFINE(HAVE_STRUCT_UCRED_DARWIN,1,[Do we have the Darwin version of struct ucred?])
fi
if check_for_type "struct ucred" "$headers"; then
AC_DEFINE(HAVE_STRUCT_UCRED,1,[Do we have struct ucred?])
fi
if check_for_type "struct cmsgcred" "$headers" ; then
AC_DEFINE(HAVE_STRUCT_CMSGCRED,1,[Do we have struct cmsgcred?])
fi
if check_for_type "struct fcred" "$headers"; then
AC_DEFINE(HAVE_STRUCT_FCRED,1,[Do we have struct fcred?])
fi
if check_for_type "struct cred" "$headers"; then
AC_DEFINE(HAVE_STRUCT_CRED,1,[Do we have struct cred?])
fi
if check_for_type "struct sockcred" "$headers"; then
AC_DEFINE(HAVE_STRUCT_SOCKCRED,1,[Do we have struct sockcred?])
fi
dnl Check TERMIOS for components (e.g. c_line not present on Solaris)
dnl
AC_CACHE_CHECK([for c_line in termios],samba_cv_HAVE_TERMIOS_C_LINE,[
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/termios.h>],
[struct termios ti; ti.c_line = 'a';],
samba_cv_HAVE_TERMIOS_C_LINE=yes,samba_cv_HAVE_TERMIOS_C_LINE=no,samba_cv_HAVE_TERMIOS_C_LINE=cross)])
if test x"$samba_cv_HAVE_TERMIOS_C_LINE" = x"yes"; then
AC_DEFINE(HAVE_TERMIOS_C_LINE,1,[ ])
fi
dnl Check sockaddr_in for components (e.g. sin_len not present on Solaris)
dnl
AC_CACHE_CHECK([for sin_len in sockaddr_in],samba_cv_HAVE_SOCKADDR_IN_SIN_LEN,[
AC_TRY_COMPILE([#include <sys/types.h>
#include <netinet/in.h>],
[struct sockaddr_in si; si.sin_len = 1;],
samba_cv_HAVE_SOCKADDR_IN_SIN_LEN=yes,samba_cv_HAVE_SOCKADDR_IN_SIN_LEN=no,samba_cv_HAVE_SOCKADDR_IN_SIN_LEN=cross)])
if test x"$samba_cv_HAVE_SOCKADDR_IN_SIN_LEN" = x"yes"; then
AC_DEFINE(HAVE_SOCKADDR_IN_SIN_LEN,1,[ ])
fi
dnl Check msghdr for components (e.g. msg_control/msg_controlen not present on Solaris)
dnl
AC_CACHE_CHECK([for msg_control in msghdr],samba_cv_HAVE_MSG_CONTROL_MSGHDR,[
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/socket.h>
],
[struct msghdr mh; mh.msg_control = (void *)0;],
samba_cv_HAVE_MSG_CONTROL_MSGHDR=yes,samba_cv_HAVE_MSG_CONTROL_MSGHDR=no,samba_cv_HAVE_MSG_CONTROL_MSGHDR=cross)])
if test x"$samba_cv_HAVE_MSG_CONTROL_MSGHDR" = x"yes"; then
MSGHDR_TYPE="msghdr"
IPCSOCKET_C="ipcsocket.c"
IPCSOCKET_LO="ipcsocket.lo"
else
MSGHDR_TYPE="nmsghdr"
IPCSOCKET_C=""
IPCSOCKET_LO=""
fi
dnl Check syslog.h for 'facilitynames' table
dnl
AC_CACHE_CHECK([for facilitynames in syslog.h],ac_cv_HAVE_SYSLOG_FACILITYNAMES,[
AC_TRY_COMPILE([
#define SYSLOG_NAMES
#include <stdlib.h>
#include <syslog.h>
],
[ void *fnames; fnames = facilitynames; ],
ac_cv_HAVE_SYSLOG_FACILITYNAMES=yes,ac_cv_HAVE_SYSLOG_FACILITYNAMES=no,ac_cv_HAVE_SYSLOG_FACILITYNAMES=cross)])
if test x"$ac_cv_HAVE_SYSLOG_FACILITYNAMES" = x"yes"; then
AC_DEFINE(HAVE_SYSLOG_FACILITYNAMES,1,[ ])
fi
dnl
dnl Check for ALIGN in /sys/param.h
dnl
AC_MSG_CHECKING("for ALIGN in sys/param.h")
AC_EGREP_CPP(FoundAlign,
[#include <sys/param.h>
#ifdef ALIGN
FoundAlign
#endif
], [
ALIGN="ALIGN"
AC_MSG_RESULT(Yes)
],
AC_MSG_RESULT("No"))
AC_MSG_CHECKING("for T_ALIGN in xti.h")
AC_EGREP_CPP(FoundAlign,
[#include <xti.h>
#ifdef T_ALIGN
FoundAlign
#endif
], [
ALIGN="T_ALIGN"
AC_MSG_RESULT(Yes)
],
AC_MSG_RESULT(No))
AC_SUBST(IPCSOCKET_C)
AC_SUBST(IPCSOCKET_LO)
AC_SUBST(ALIGN)
AC_SUBST(MSGHDR_TYPE)
dnl ************************************************************************
dnl checks for compiler characteristics
dnl
dnl Warnings for C compilers. Note: generic, portable warnings only.
dnl Things likely to be specific to a particular OS or module should be
dnl carefully handled afterwards.
AC_C_STRINGIZE
dnl **********************************************************************
dnl time-related declarations etc.
AC_STRUCT_TIMEZONE
if check_for_type_member "struct tm" "tm_gmtoff" "#include <time.h>"; then
AC_DEFINE(HAVE_TM_GMTOFF,1,[Do we have structure member tm_gmtoff?])
fi
dnl **********************************************************************
dnl Check the size of the integer types
dnl So we can have integers of known sizes as needed
dnl
AC_CHECK_SIZEOF(char)
AC_CHECK_SIZEOF(short)
AC_CHECK_SIZEOF(int)
AC_CHECK_SIZEOF(long)
AC_CHECK_SIZEOF(long long)
AC_ARG_ENABLE([all],
[ --enable-all Activate ALL features
[default=no]])
AC_ARG_ENABLE([rpath],
[ --enable-rpath Enable RPATH in libtool
[default=yes]])
AC_ARG_ENABLE([ansi],
[ --enable-ansi force GCC to compile to ANSI/ANSI standard for older compilers.
[default=yes]])
AC_ARG_ENABLE([fatal-warnings],
[ --enable-fatal-warnings very pedantic and fatal warnings for gcc
[default=yes]],
[], [enable_fatal_warnings=unknown])
AC_ARG_ENABLE([times-kludge],
[ --enable-times-kludge enables a kludge to workaround a bug in glibc's times(2) call
[default=yes]],
[], [enable_times_kludge=unknown])
AC_ARG_ENABLE([no-long-long],
[ --enable-no-long-long removes no long long warning for gcc
[default=yes]],
[], [enable_no_long_long=yes])
AC_ARG_ENABLE([traditional-warnings],
[ --enable-traditional-warnings
enable traditional warnings gcc (-Wtraditional)
[default=no]])
AC_ARG_ENABLE([pretty],
[ --enable-pretty
Pretty-print compiler output unless there is an error
[default=no]])
AC_ARG_ENABLE([quiet],
[ --enable-quiet
Supress make output unless there is an error
[default=no]])
AC_ARG_ENABLE([ldirectord],
[ --enable-ldirectord enable Linix Director Daemon for use with LVS
[default=yes]],
[], [enable_ldirectord=yes])
AM_CONDITIONAL(LDIRECTORD_BUILD, test "X$enable_ldirectord" = "Xyes")
AC_ARG_ENABLE([thread-safe],
[ --enable-thread-safe Enable some client libraries to be thread safe.
[default=no]])
AC_ARG_ENABLE([snmp],
[ --enable-snmp Enable building of SNMP related functionality.
[default=yes]])
AC_ARG_ENABLE([snmp-subagent],
[ --enable-snmp-subagent Enable building of our SNMP subagent (lots of dependencies).
[default=try]])
CC_WARNINGS=""
dnl - If requested, enable ALL subsystems.
if test "${enable_all}" = "yes" ; then
echo "Enabling all optional features."
enable_ansi=yes;
enable_crm=yes;
enable_fatal_warnings=yes;
enable_lrm=yes;
enable_snmp_subagent=try;
enable_mgmt=try;
enable_quorumd=try;
enable_cim_provider=try;
fi
AC_ARG_ENABLE([bundled-ltdl],
[ --enable-bundled-ltdl Configure, build and install the standalone ltdl library bundled with Heartbeat [default=no]])
LTDL_LIBS=""
dnl Check before we enable -Wstrict-prototypes as it causes the test to fail
AC_CHECK_LIB(ltdl, lt_dlopen, [LTDL_foo=1])
if test "x${enable_bundled_ltdl}" = "xyes"; then
if test $ac_cv_lib_ltdl_lt_dlopen = yes; then
AC_MSG_NOTICE([Disabling usage of installed ltdl])
fi
ac_cv_lib_ltdl_lt_dlopen=no
fi
LIBLTDL_DIR=""
if test $ac_cv_lib_ltdl_lt_dlopen != yes ; then
AC_MSG_NOTICE([Installing local ltdl])
LIBLTDL_DIR=libltdl
( cd $srcdir ; $TAR -xvf libltdl.tar )
if test "$?" -ne 0; then
AC_MSG_ERROR([$TAR of libltdl.tar in $srcdir failed])
fi
AC_CONFIG_SUBDIRS(libltdl)
else
LIBS="$LIBS -lltdl"
AC_MSG_NOTICE([Using installed ltdl])
INCLTDL=""
LIBLTDL=""
fi
dnl libltdl additions
AC_SUBST(INCLTDL)
AC_SUBST(LIBLTDL)
AC_SUBST(LIBLTDL_DIR)
dnl ************ curses **********************
dnl A few OSes (e.g. Linux) deliver a default "ncurses" alongside "curses".
dnl Many non-Linux deliver "curses"; sites may add "ncurses".
dnl
dnl However, the source-code recommendation for both is to #include "curses.h"
dnl (i.e. "ncurses" still wants the include to be simple, no-'n', "curses.h").
dnl
dnl Andrew Beekhof (author of heartbeat code that uses this functionality)
dnl wishes "ncurses" to take precedence. So the following ordering has
dnl been devised to implement this.
dnl
dnl Look first for the headers, then set the libraries accordingly.
dnl (Normally autoconf suggests looking for libraries first.)
dnl
AC_CHECK_HEADERS(curses.h)
AC_CHECK_HEADERS(curses/curses.h)
AC_CHECK_HEADERS(ncurses.h)
AC_CHECK_HEADERS(ncurses/ncurses.h)
dnl Although n-library is preferred, only look for it if the n-header was found.
CURSESLIBS=''
if test "$ac_cv_header_ncurses_h" = "yes"; then
AC_CHECK_LIB(ncurses, printw,
[CURSESLIBS='-lncurses'; AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]
)
fi
if test "$ac_cv_header_ncurses_ncurses_h" = "yes"; then
AC_CHECK_LIB(ncurses, printw,
[CURSESLIBS='-lncurses'; AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]
)
fi
dnl Only look for non-n-library if there was no n-library.
if test X"$CURSESLIBS" = X"" -a "$ac_cv_header_curses_h" = "yes"; then
AC_CHECK_LIB(curses, printw,
[CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]
)
fi
dnl Only look for non-n-library if there was no n-library.
if test X"$CURSESLIBS" = X"" -a "$ac_cv_header_curses_curses_h" = "yes"; then
AC_CHECK_LIB(curses, printw,
[CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]
)
fi
AC_SUBST(CURSESLIBS)
dnl ************ curses **********************
if test "$GCC" = yes; then
dnl
dnl We make sure warnings are carefully scrubbed out of the output if
dnl you're running on some platforms. You can enable that behavior with
dnl the option "fatal-warnings", by specifying --enable-fatal-warnings.
dnl Or, you can disable it with --disable-fatal-warnings.
dnl
dnl Horms 10th August 2001
dnl Don't do this, it seems to cause configure in
dnl the libltdl/ directory to die under Debian Woody
dnl I'm suspecting it will be a problem on other systems too.
dnl For this reason it now defaults to off.
dnl AlanR 11 August 2001
dnl Show no mercy to broken OSes and other software. If you have broken
dnl software, turn this feature off.
dnl NO warnings WHATSOVER will be tolerated without good reason.
dnl A distribution being broken isn't a good reason.
dnl The cure for that is fix the distribution, not destroy the integrity
dnl of the entire project by defaulting it to "off".
dnl In my experience, there are ways of making individual warnings go
dnl away.
dnl The only way I know to keep them out is to make them an absolute
dnl pain to deal with. Otherwise they're a pain to fix.
dnl This policy is not an accident, nor was it chosen without significant
dnl thought and experience.
dnl
cc_supports_flag() {
AC_MSG_CHECKING(whether $CC supports "$@")
Cfile=/tmp/foo${$}
touch ${Cfile}.c
$CC -c "$@" ${Cfile}.c -o ${Cfile}.o >/dev/null 2>&1
rc=$?
rm -f ${Cfile}.c ${Cfile}.o
case $rc in
0) AC_MSG_RESULT(yes);;
*) AC_MSG_RESULT(no);;
esac
return $rc
}
dnl ************ printw **********************
if test X"$CURSESLIBS" != X"" && cc_supports_flag -Wcast-qual \
&& cc_supports_flag -Werror; then
dnl Check for printw() prototype compatibility
dnl FIXME: We can check che prototype compatibility only if $CC supports
dnl -Wcast-qual and -Werror
AC_MSG_CHECKING(whether printw() requires argument of "const char *")
ac_save_LIBS=$LIBS
LIBS="$CURSESLIBS $LIBS"
ac_save_CFLAGS=$CFLAGS
CFLAGS="-Wcast-qual -Werror"
AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[
#if defined(HAVE_CURSES_H)
# include <curses.h>
#elif defined(HAVE_NCURSES_H)
# include <ncurses.h>
#endif
],
[printw((const char *)"Test");]
)],
[ac_cv_compatible_printw=yes],
[ac_cv_compatible_printw=no]
)
LIBS=$ac_save_LIBS
CFLAGS=$ac_save_CFLAGS
AC_MSG_RESULT([$ac_cv_compatible_printw])
if test "$ac_cv_compatible_printw" = no; then
AC_MSG_WARN([The printw() function of your ncurses or curses library is old, we will disable usage of the library. If you want to use this library anyway, please update to newer version of the library, ncurses 5.4 or later is recommended. You can get the library from http://www.gnu.org/software/ncurses/.])
AC_MSG_NOTICE([Disabling curses])
AC_DEFINE(HAVE_INCOMPATIBLE_PRINTW, 1, [Do we have incompatible printw() in curses library?])
dnl AC_DEFINE(HAVE_CURSES_H, 0)
dnl AC_DEFINE(HAVE_NCURSES_H, 0)
fi
fi
dnl ************ printw **********************
EXTRA_WARNINGS=""
# We had to eliminate -Wnested-externs because of libtool changes
WARNLIST="all missing-prototypes
missing-declarations
strict-prototypes
declaration-after-statement
pointer-arith
write-strings
cast-qual cast-align
bad-function-cast
inline
missing-format-attribute
format=2
format-security
format-nonliteral
no-long-long
no-strict-aliasing"
for j in $WARNLIST
do
if
cc_supports_flag -W$j
then
case $j in
"no-long-long")
if test "${enable_no_long_long}" = "yes"; then
EXTRA_WARNINGS="$EXTRA_WARNINGS -W$j"
fi;;
*) EXTRA_WARNINGS="$EXTRA_WARNINGS -W$j";;
esac
fi
done
dnl Add any system specific options here.
if test "${enable_ansi}" = "unknown"; then
enable_ansi=yes
fi
case "$host_os" in
*linux*|*bsd*)
if test "${enable_fatal_warnings}" = "unknown"; then
enable_fatal_warnings=yes
fi
;;
*solaris*)
;;
esac
case "$host_os" in
*linux*)
if test "${enable_times_kludge}" = "unknown"; then
enable_times_kludge=yes
fi
;;
esac
if test "${enable_ansi}" = yes && cc_supports_flag -std=iso9899:199409 ; then
echo "Enabling ANSI Compatibility on this platform"
ANSI="-ansi -D_GNU_SOURCE -DANSI_ONLY"
fi
if test "${enable_fatal_warnings}" = yes && cc_supports_flag -Werror ; then
echo "Enabling Fatal Warnings (-Werror) on this platform"
FATAL_WARNINGS="-Werror"
fi
if test "$enable_traditional_warning" = yes && \
cc_supports_flag -Wtraditional; then
echo "Enabling traditional warnings"
EXTRA_WARNINGS="$EXTRA_WARNINGS -Wtraditional"
fi
CC_WARNINGS="$EXTRA_WARNINGS $FATAL_WARNINGS $ANSI"
NON_FATAL_CC_WARNINGS="$EXTRA_WARNINGS"
fi
if test "${enable_times_kludge}" = no; then
echo "Disabling times(2) kludge"
AC_DEFINE(DISABLE_TIMES_KLUDGE, 1, [disable times(2) kludge])
fi
AC_SUBST(DISABLE_TIMES_KLUDGE)
AC_MSG_CHECKING(which init (rc) directory to use)
INITDIR=""
for initdir in /etc/init.d /etc/rc.d/init.d /sbin/init.d \
/usr/local/etc/rc.d /etc/rc.d
do
if
test -d $initdir
then
INITDIR=$initdir
AC_MSG_RESULT($INITDIR);
break
fi
done
AC_ARG_WITH(initdir,
[ --with-initdir=DIR directory for init (rc) scripts [${INITDIR}]],
[ if test x"$withval" = xprefix; then INITDIR=${prefix}; else
INITDIR="$withval"; fi ])
if
test "X$INITDIR" = X
then
FatalMissingThing "init directory" "Could not locate init directory"
fi
AC_SUBST(INITDIR)
dnl **********************************************************************
dnl checks for group to install fifos as
dnl
dnl These checks aren't right. We need to locate the lowest
dnl unused group id if haclient isn't in the /etc/group file
dnl and no one has overridden group-id with a --with-group-id
dnl option.
dnl
AC_ARG_WITH(
group-name,
[ --with-group-name=GROUP_NAME
GROUP_NAME to run our programs as. [default=haclient] ],
[ HA_APIGROUP="$withval" ],
[ HA_APIGROUP="haclient" ],
)
AC_SUBST(HA_APIGROUP)
AC_DEFINE_UNQUOTED(HA_APIGROUP, "$HA_APIGROUP", group for our programs)
if
test -z "${GETENT}" -o ! -x "${GETENT}"
then
GETENT=getent
getent() {
grep "^${2}:" /etc/$1
}
fi
if
test -z "${IP2UTIL}" -o ! -x "${IP2UTIL}"
then
IP2UTIL=/sbin/ip
fi
AC_ARG_WITH(
group-id,
[ --with-group-id=GROUP_ID
GROUP_ID to run our programs as. [default=60] ],
[ HA_APIGID="$withval" ],
[ HA_APIGID=65 ],
)
if
getent group "$HA_APIGROUP" > /dev/null
then
HA_APIGID=`getent group "$HA_APIGROUP" | cut -d: -f3`
fi
AC_SUBST(HA_APIGID)
AC_DEFINE_UNQUOTED(HA_APIGID, "$HA_APIGID", id for api group)
AC_ARG_WITH(
ccmuser-name,
[ --with-ccmuser-name=HA_CCMUSER_NAME
HA_CCMUSER_NAME to run privileged non-root things as. [default=hacluster] ],
[ HA_CCMUSER="$withval" ],
[ HA_CCMUSER="hacluster" ],
)
AC_SUBST(HA_CCMUSER)
AC_DEFINE_UNQUOTED(HA_CCMUSER, "$HA_CCMUSER", user to run privileged non-root things as)
AC_ARG_WITH(
ccmuser-id,
[ --with-ccmuser-id=HA_HA_CCMUSER_ID
USER_ID to run privileged non-root things as. [default=17] ],
[ HA_CCMUID="$withval" ],
[ HA_CCMUID=17 ],
)
if
getent passwd "$HA_CCMUSER" >/dev/null
then
HA_CCMUID=`getent passwd "$HA_CCMUSER" | cut -d: -f3`
fi
AC_SUBST(HA_CCMUID)
AC_DEFINE_UNQUOTED(HA_CCMUID, "$HA_CCMUID", id for ccm user)
#
# Priority for starting via init startup scripts
#
AC_ARG_WITH(
start-init-priority,
[ --with-start-init-priority=number
Init start priority. [default=75] ],
[ HB_INITSTARTPRI="$withval" ],
[ HB_INITSTARTPRI=75 ],
)
AC_SUBST(HB_INITSTARTPRI)
AC_DEFINE_UNQUOTED(HB_INITSTARTPRI,"$HB_INITSTARTPRI", init start priority)
#
# Priority for stopping via init shutdown scripts
#
AC_ARG_WITH(
stop-init-priority,
[ --with-stop-init-priority=number
Init stop priority. [default=5] ],
[ HB_INITSTOPPRI="$withval" ],
[ HB_INITSTOPPRI=05 ],
)
AC_SUBST(HB_INITSTOPPRI)
AC_DEFINE_UNQUOTED(HB_INITSTOPPRI,"$HB_INITSTOPPRI", init stop priority)
#
# Name of UCD-SNMP development package
#
AC_ARG_WITH(
ucd-snmp-devel,
[ --with-snmp-name=name Name of ucd snmp developemnt RPM.
[default=ucd-snmp-devel] ],
[ UCDSNMPDEVEL=$withval ],
[ UCDSNMPDEVEL=ucd-snmp-devel ],
)
if test "$ac_cv_header_ucd_snmp_snmp_h" = no; then
UCDSNMPDEVEL=""
fi
AC_SUBST(UCDSNMPDEVEL)
AC_DEFINE_UNQUOTED(UCDSNMPDEVEL, $UCDSNMPDEVEL,
Name of UCD SNMP development package)
dnl ************************************************************************
dnl checks for library functions to replace them
dnl
dnl alphasort: Only on BSD.
dnl System-V systems may have it, but hidden and/or deprecated.
dnl A replacement function is supplied for it.
dnl
dnl NoSuchFunctionName:
dnl is a dummy function which no system supplies. It is here to make
dnl the system compile semi-correctly on OpenBSD which doesn't know
dnl how to create an empty archive
dnl
dnl scandir: Only on BSD.
dnl System-V systems may have it, but hidden and/or deprecated.
dnl A replacement function is supplied for it.
dnl
dnl setenv: is some bsdish function that should also be avoided (use
dnl putenv instead)
dnl On the other hand, putenv doesn't provide the right API for the
dnl code and has memory leaks designed in (sigh...) Fortunately this
dnl A replacement function is supplied for it.
dnl
dnl setproctitle: sets the process title to a given string
dnl
dnl strerror: returns a string that corresponds to an errno.
dnl A replacement function is supplied for it.
dnl
dnl unsetenv: is some bsdish function that should also be avoided (No
dnl replacement)
dnl A replacement function is supplied for it.
dnl
dnl strnlen: is a gnu function similar to strlen, but safer.
dnl We wrote a tolearably-fast replacement function for it.
dnl
dnl strndup: is a gnu function similar to strdup, but safer.
dnl We wrote a tolearably-fast replacement function for it.
dnl
dnl daemon: is a GNU function. The daemon() function is for programs wishing to
dnl detach themselves from the controlling terminal and run in the
dnl background as system daemon
dnl A replacement function is supplied for it.
dnl
dnl Check Only
dnl
dnl getopt: If this is valid, define HAVE_DECL_GETOPT to make the getopt.h header compile cleanly.
dnl
-AC_REPLACE_FUNCS(alphasort inet_pton NoSuchFunctionName scandir setenv strerror unsetenv strnlen strndup daemon uuid_parse strlcpy)
+AC_REPLACE_FUNCS(alphasort inet_pton NoSuchFunctionName scandir setenv strerror unsetenv strnlen strndup daemon uuid_parse strlcpy strlcat)
dnl AC_CHECK_FUNCS(alphasort inet_pton NoSuchFunctionName scandir setenv strerror unsetenv strnlen strndup daemon uuid_parse)
AC_CHECK_FUNCS(getopt,
AC_DEFINE(HAVE_DECL_GETOPT, 1, [Have getopt function]))
AC_SUBST(HA_HAVE_ALPHASORT)
AC_SUBST(HA_HAVE_INET_PTON)
AC_SUBST(HA_HAVE_SCANDIR)
AC_SUBST(HA_HAVE_SETENV)
AC_SUBST(HA_HAVE_STRERROR)
AC_SUBST(HA_HAVE_UNSETENV)
AC_SUBST(HA_HAVE_STRNLEN)
AC_SUBST(HA_HAVE_STRNDUP)
AC_SUBST(HA_HAVE_DAEMON)
AC_SUBST(HA_HAVE_UUID_PARSE)
AC_SUBST(HAVE_STRLCPY)
AC_SUBST(HAVE_DECL_GETOPT)
AC_CHECK_FUNCS(fcntl)
AC_CHECK_FUNCS(flock)
AC_CHECK_FUNCS(inet_aton)
AC_CHECK_FUNCS(mallinfo)
AC_CHECK_FUNCS(mallopt)
AC_CHECK_FUNCS(__default_morecore)
AC_CHECK_FUNCS(seteuid)
AC_CHECK_FUNCS(setegid)
AC_CHECK_FUNCS(getpeereid)
dnl **********************************************************************
dnl Check for various argv[] replacing functions on various OSs
dnl
dnl Borrowed from Proftpd
dnl Proftpd is Licenced under the terms of the GNU General Public Licence
dnl and is available from http://www.proftpd.org/
dnl
AC_CHECK_FUNCS(setproctitle)
AC_CHECK_HEADERS(libutil.h)
AC_CHECK_LIB(util, setproctitle,
[AC_DEFINE(HAVE_SETPROCTITLE,1,[ ])
ac_cv_func_setproctitle="yes" ; LIBS="$LIBS -lutil"])
if test "$ac_cv_func_setproctitle" = "yes"; then
pf_argv_set="PF_ARGV_NONE"
fi
if test "$pf_argv_set" = ""; then
AC_CHECK_HEADERS(sys/pstat.h)
if test "$ac_cv_header_pstat_h" = "yes"; then
AC_CHECK_FUNCS(pstat)
if test "$ac_cv_func_pstat" = "yes"; then
pf_argv_set="PF_ARGV_PSTAT"
else
pf_argv_set="PF_ARGV_WRITEABLE"
fi
fi
if test "$pf_argv_set" = ""; then
AC_EGREP_HEADER([#define.*PS_STRINGS.*],sys/exec.h,
have_psstrings="yes",have_psstrings="no")
if test "$have_psstrings" = "yes"; then
pf_argv_set="PF_ARGV_PSSTRINGS"
fi
fi
if test "$pf_argv_set" = ""; then
AC_CACHE_CHECK(whether __progname and __progname_full are available,
pf_cv_var_progname,
AC_TRY_LINK([extern char *__progname, *__progname_full;],
[__progname = "foo"; __progname_full = "foo bar";],
pf_cv_var_progname="yes", pf_cv_var_progname="no"))
if test "$pf_cv_var_progname" = "yes"; then
AC_DEFINE(HAVE___PROGNAME,1,[ ])
fi
AC_CACHE_CHECK(which argv replacement method to use,
pf_cv_argv_type,
AC_EGREP_CPP(yes,[
#if defined(__GNU_HURD__)
yes
#endif
],pf_cv_argv_type="new", pf_cv_argv_type="writeable"))
if test "$pf_cv_argv_type" = "new"; then
pf_argv_set="PF_ARGV_NEW"
fi
if test "$pf_argv_set" = ""; then
pf_argv_set="PF_ARGV_WRITEABLE"
fi
fi
fi
AC_DEFINE_UNQUOTED(PF_ARGV_TYPE, $pf_argv_set,
mechanism to pretty-print ps output: setproctitle-equivalent)
dnl End of tests borrowed from Proftpd
dnl check if header file and lib are there for hbaping
hbaping_build="yes"
AC_CHECK_HEADERS(time.h hbaapi.h, , [hbaping_build="no"],[[#if HAVE_TIME_H
#include <time.h>
#endif]])
AC_CHECK_LIB(HBAAPI, HBA_SendScsiInquiry, , [hbaping_build="no"])
AM_CONDITIONAL(HBAAPI_BUILD, test "x${hbaping_build}" = "xyes")
dnl check if header file and lib are there for zlib
zlib_installed="yes"
AC_CHECK_HEADERS(zlib.h, , [zlib_installed="no"],)
AC_CHECK_LIB(z, compress , , [zlib_intalled="no"])
AM_CONDITIONAL(BUILD_ZLIB_COMPRESS_MODULE, test "x${zlib_installed}" = "xyes")
dnl check if header file and lib are there for zlib
bz2_installed="yes"
AC_CHECK_HEADERS(bzlib.h, , [bz2_installed="no"],)
AC_CHECK_LIB(bz2, BZ2_bzBuffToBuffCompress , , [bz2_intalled="no"])
AM_CONDITIONAL(BUILD_BZ2_COMPRESS_MODULE, test "x${bz2_installed}" = "xyes")
dnl check if header file and lib are there for openais module
openais_installed="yes"
AC_CHECK_HEADERS(evs.h, , [openais_installed="no"],)
AC_CHECK_LIB(evs, evs_initialize , , [openais_intalled="no"])
AM_CONDITIONAL(BUILD_OPENAIS_MODULE, test "x${openais_installed}" = "xyes")
AC_MSG_CHECKING(if clock_t is long enough)
if test $ac_cv_sizeof_long -ge 8; then
AC_MSG_RESULT(yes)
AC_DEFINE(CLOCK_T_IS_LONG_ENOUGH, 1, [Set if CLOCK_T is adequate by itself for the "indefinite future" (>= 100 years)])
else
AC_MSG_RESULT(no)
fi
dnl check if there are getpid() inconsistency
dnl Note: reduce LIBS; in particular, ltdl can cause confusion.
dnl Possibly better: move 'LIBS="$LIBS -lltdl"' from above to beyond here.
dnl
AC_MSG_CHECKING(for getpid() consistency in multi-process/threads program)
ac_save_LIBS=$LIBS
LIBS="-lpthread"
AC_TRY_RUN(`cat $srcdir/config/pidtest.c`,
AC_MSG_RESULT(ok),
[AC_MSG_RESULT(fail); AC_DEFINE(GETPID_INCONSISTENT, 1 , [pid inconsistent])],)
LIBS=$ac_save_LIBS
dnl check byte order
AC_MSG_CHECKING(for byteorder)
AC_TRY_RUN(`cat $srcdir/config/byteorder_test.c`,
[AC_MSG_RESULT(little-endian); AC_DEFINE(CONFIG_LITTLE_ENDIAN, 1, [little-endian])],
[AC_MSG_RESULT(big-endian); AC_DEFINE(CONFIG_BIG_ENDIAN, 1, [big-endian])],)
dnl
dnl Lex and yacc can't be trusted to produce code that won't produce
dnl warnings
dnl
NON_FATAL_CFLAGS="$CFLAGS $NON_FATAL_CC_WARNINGS"
AC_SUBST(NON_FATAL_CFLAGS)
dnl
dnl We reset CFLAGS to include our warnings *after* all function
dnl checking goes on, so that our warning flags don't keep the
dnl AC_*FUNCS() calls above from working. In particular, -Werror will
dnl *always* cause us troubles if we set it before here.
dnl
dnl
CFLAGS="$CFLAGS $CC_WARNINGS"
dnl NOTE:
dnl This check should only be done after CFLAGS is set. Otherwise
dnl linux box will complain because of a warning of the undefined
dnl function sigignore().
dnl
dnl In theory, all function checks should be done after the CFLAGS is
dnl set since we are enforcing the -Werror. But this would have a big
dnl impact on the whole source tree so I am only moving the
dnl sigignore for now. A bit of a hack.
dnl
dnl sigignore: Only on Solaris.
dnl it is a solaris replacement for signal(s,SIG_IGN).
dnl
AC_CHECK_FUNCS(sigignore)
dnl
dnl Make sure that CFLAGS is not exported. If the user did
dnl not have CFLAGS in their environment then this should have
dnl no effect. However if CFLAGS was exported from the user's
dnl environment, then the new CFLAGS will also be exported
dnl to sub processes. This causes a problem when configure
dnl is run in the libltdl directory. Horms 16th July 2002
dnl
if export | fgrep " CFLAGS=" > /dev/null; then
export -n CFLAGS || true # We don't want to bomb out if this fails
fi
if test "$GCC" = yes; then
CFLAGS="$CFLAGS -ggdb3"
if
cc_supports_flag -funsigned-char
then
CFLAGS="$CFLAGS -funsigned-char"
fi
else
CFLAGS="$CFLAGS -g"
fi
dnl AC_SUBST(CC_WARNINGS)
dnl ************************************************************************
dnl pre AC_OUTPUT stuff
dnl
dnl th aux dir (for holding config & autogenerated stuff)
dnl AC_SUBST(ac_aux_dir)
AC_SUBST(LIBADD_DL) dnl extra flags for dynamic linking libraries
AC_SUBST(LIBADD_INTL) dnl extra flags for GNU gettext stuff...
AC_SUBST(LOCALE)
HA_HBCONF_DIR=$sysconfdir/ha.d
AC_SUBST(HA_HBCONF_DIR)
AC_DEFINE_UNQUOTED(HA_HBCONF_DIR,"$HA_HBCONF_DIR", Heartbeat configuration directory)
HA_RC_DIR=$HA_HBCONF_DIR/rc.d
AC_SUBST(HA_RC_DIR)
AC_DEFINE_UNQUOTED(HA_RC_DIR,"$HA_RC_DIR", heartbeat v1 script directory)
AC_ARG_ENABLE([crm],
[ --enable-crm Compile the Version 2 Cluster Resource Manager. [default=yes]],
[], [enable_crm=yes])
CRM_DIR=""
if test "x${enable_crm}" = "xyes"; then
CRM_ENABLED=1
CRM_DIR=crm
AC_DEFINE_UNQUOTED(WITH_CRM, 1, Use the new Cluster Resource Manager)
else
if test -z "${enable_crm}"; then
enable_crm="no"
fi
dnl None of the following items build without the CRM available
enable_mgmt=no
enable_dopd=no
enable_cim_provider=no
fi
AC_SUBST(CRM_DIR)
AC_MSG_NOTICE([whether to enable the Cluster Resource Manager... ${enable_crm}])
AM_CONDITIONAL(CRM_BUILD, test "x${enable_crm}" = "xyes")
AC_SUBST(CRM_ENABLED)
dnl lrm configuration
AC_ARG_ENABLE([lrm],
[ --enable-lrm Compile the new Local Resource Manager. [default=yes]],
[], [enable_lrm=yes])
LRM_ENABLED=0
if test "x${enable_crm}" = "xyes"; then
if test "x${enable_lrm}" = "xno"; then
AC_MSG_WARN([crm enabled, overriding --enable-lrm=no with --enable-lrm=yes])
elif test -z "${enable_lrm}"; then
AC_MSG_WARN([crm enabled, defaulting to --enable-lrm=yes])
fi
enable_lrm="yes"
elif test -z "${enable_lrm}"; then
enable_lrm="no"
fi
if test "x${enable_lrm}" = "xyes"; then
LRM_ENABLED=1
fi
if
test -h /proc/$$/exe
then
AC_MSG_NOTICE("/proc/{pid}/exe link is supported")
AC_DEFINE_UNQUOTED(HAVE_PROC_PID, 1, Define to 1 if /proc/{pid} is supported.)
fi
AC_SUBST(LRM_ENABLED)
AM_CONDITIONAL(LRM_BUILD, test "x${enable_lrm}" = "xyes")
AC_MSG_NOTICE([whether to enable the Local Resource Manager... ${enable_lrm}])
dnl ************************************************************************
dnl management and quorum daemons.
AC_CHECK_HEADERS(gnutls/gnutls.h)
AC_CHECK_HEADERS(security/pam_appl.h pam/pam_appl.h)
dnl GNUTLS library: Attempt to determine by 'libgnutls-config' program.
dnl If no 'libgnutls-config', try traditional autoconf means.
AC_PATH_PROGS(LIBGNUTLS_CONFIG, libgnutls-config)
if test -n "$LIBGNUTLS_CONFIG"; then
AC_MSG_CHECKING(for gnutls header flags)
GNUTLSHEAD="`$LIBGNUTLS_CONFIG --cflags`";
AC_MSG_RESULT($GNUTLSHEAD)
AC_MSG_CHECKING(for gnutls library flags)
GNUTLSLIBS="`$LIBGNUTLS_CONFIG --libs`";
AC_MSG_RESULT($GNUTLSLIBS)
else
AC_CHECK_LIB(gnutls, gnutls_init)
fi
AC_SUBST(GNUTLSHEAD)
AC_SUBST(GNUTLSLIBS)
dnl management tool configuration
AC_ARG_ENABLE([mgmt],
[ --enable-mgmt Compile the management tool. [default=try]],
[], [enable_mgmt=try])
if test "x${enable_mgmt}" != "xno"; then
if test "x${enable_mgmt}" = "xtry"; then
MISSING_FN="WarnMissingThing"
else
MISSING_FN="FatalMissingThing"
fi
enable_mgmt="yes"
MGMT_ENABLED=1
AM_CHECK_PYTHON_HEADERS(,PYTHON_INCLUDES='')
AC_SUBST(PYTHON_INCLUDES)
if test "x${PYTHON_INCLUDES}" = "x"; then
$MISSING_FN "Python.h" \
"The GUI managment module needs Python.h (Linux: python-devel package)"
enable_mgmt="no"
MGMT_ENABLED=0
fi
if test "$ac_cv_header_security_pam_appl_h" = "no" -a "$ac_cv_header_pam_pam_appl_h" = "no"; then
$MISSING_FN "security/pam_appl.h" \
"The GUI managment module needs the pam-devel package"
enable_mgmt="no"
MGMT_ENABLED=0
fi
if test "$ac_cv_header_gnutls_gnutls_h" = "no"; then
$MISSING_FN "gnutls/gnutls.h" \
"The GUI managment module needs GNU/TLS header files"
enable_mgmt="no"
MGMT_ENABLED=0
fi
if test -z "$SWIG"; then
$MISSING_FN "swig" \
"The GUI managment module needs swig" \
"You can get it from http://swig.org/"
enable_mgmt="no"
MGMT_ENABLED=0
fi
fi
if test "x${enable_mgmt}" != "xno"; then
RPM_ENABLE_MGMT_CONFIG=1
else
RPM_ENABLE_MGMT_CONFIG=0
fi
AC_SUBST(RPM_ENABLE_MGMT_CONFIG)
AM_CONDITIONAL(MGMT_BUILD, test "x${enable_mgmt}" != "xno")
if test "x${enable_mgmt}" != "xno"; then
AC_DEFINE_UNQUOTED(MGMT_ENABLED, 1, Define to 1 if the mgmt-daemon and friends are enabled.)
dnl If this system might be RPM-based, then adjust some RPM-build details
if test x"${RPM}" != x""; then
dnl FIXME: a flawy solution but no better one now
if rpm -q python-gtk > /dev/null; then
RPM_MGMT_RUNTIME_REQUIRES="libglade2, python-gtk";
else
RPM_MGMT_RUNTIME_REQUIRES="libglade2, pygtk2";
fi
else
RPM_MGMT_RUNTIME_REQUIRES=
fi
else
RPM_MGMT_RUNTIME_REQUIRES=
fi
AC_SUBST(RPM_MGMT_RUNTIME_REQUIRES)
AC_MSG_NOTICE([whether to enable the management tool... ${enable_mgmt}])
dnl quorum server configuration
AC_ARG_ENABLE([quorumd],
[ --enable-quorumd Compile the quorum server. [default=try]],
[], [enable_quorumd=try])
if test "x${enable_quorumd}" != "xno"; then
if test "x${enable_quorumd}" = "xtry"; then
MISSING_FN="WarnMissingThing"
else
MISSING_FN="FatalMissingThing"
fi
enable_quorumd="yes"
QUORUMD_ENABLED=1
if test "$ac_cv_header_gnutls_gnutls_h" = "no"; then
$MISSING_FN "gnutls/gnutls.h" \
"The quorum server module needs GNU/TLS header files"
enable_quorumd="no"
QUORUMD_ENABLED=0
fi
fi
AC_SUBST(QUORUMD_ENABLED)
AM_CONDITIONAL(QUORUMD_BUILD, test "x${enable_quorumd}" != "xno")
AC_MSG_NOTICE([whether to enable the quorum server... ${enable_quorumd}])
dnl **********************************************
dnl TSA plugin configuration
dnl **********************************************
AC_ARG_ENABLE([tsa-plugin],
[ --enable-tsa-plugin Enable TSA plugin. [default=no]],
[], [enable_tsa_plugin=no])
AC_ARG_WITH([JAVA_HOME],
[ --with-java-home JAVA_HOME dir], [], [])
AC_ARG_WITH([TSA_DIR],
[ --with-tsa-dir TSA diretory, default = /opt/IBM/tsamp/], [], [])
JAVA_HOME=${with_java_home}
TSA_DIR=${with_tsa_dir}
if test "x${enable_tsa_plugin}" != "xno"; then
if test "x${JAVA_HOME}" = "x"; then
JAVA_BIN=`which java`
JAVA_BIN_DIR=`dirname ${JAVA_BIN}`
JAVA_HOME=`dirname ${JAVA_BIN_DIR}`
fi
if test "x${TSA_DIR}" = "x"; then
TSA_DIR="/opt/IBM/tsamp/"
fi
fi
AC_SUBST(JAVA_HOME)
AC_SUBST(TSA_DIR)
AM_CONDITIONAL(TSA_PLUGIN_BUILD, test "x${enable_tsa_plugin}" != "xno")
dnl **********************************************
dnl drbd peer outdate plugin configuration
dnl **********************************************
case "$host_os" in
*linux*)
AC_ARG_ENABLE([dopd],
[ --enable-dopd Compile the Drbd Outdate Peer Daemon and tools. [default=yes]],
[], [enable_dopd=yes])
;;
*)
enable_dopd=no
;;
esac
AM_CONDITIONAL(BUILD_DRBD_OUTDATE_PEER, test "x${enable_dopd}" != "xno")
hb_libdir="${libdir}/${HB_PKG}"
AC_SUBST(hb_libdir)
HA_PLUGIN_DIR="${hb_libdir}/plugins"
AC_SUBST(HA_PLUGIN_DIR)
AC_DEFINE_UNQUOTED(HA_PLUGIN_DIR,"$HA_PLUGIN_DIR", PILS plugin dir)
LRM_PLUGIN_DIR="${hb_libdir}/plugins/RAExec"
AC_SUBST(LRM_PLUGIN_DIR)
AC_DEFINE_UNQUOTED(LRM_PLUGIN_DIR,"$LRM_PLUGIN_DIR", LRM plugin dir)
HB_RA_DIR="${sysconfdir}/ha.d/resource.d/"
AC_SUBST(HB_RA_DIR)
AC_DEFINE_UNQUOTED(HB_RA_DIR,"$HB_RA_DIR", Location for v1 Heartbeat v1 RAs)
dnl ************ OCF (Open Cluster Framework) **********************
dnl Should be consistent with the OCF standard fixed pathname /usr/lib/ocf
dnl Changing it from this value violates the OCF standard.
dnl This is why it is not affected by the PREFIX setting.
dnl We do not recommend changing it.
dnl
OCF_ROOT_DIR="/usr/lib/ocf"
AC_ARG_WITH(ocf-root,
[ --with-ocf-root=DIR directory for OCF scripts [${OCF_ROOT_DIR}]],
[ if test x"$withval" = xprefix; then OCF_ROOT_DIR=${prefix}; else
OCF_ROOT_DIR="$withval"; fi ])
if test "X$OCF_ROOT_DIR" = X; then
FatalMissingThing "OCF directory" "Could not locate OCF directory"
fi
AC_SUBST(OCF_ROOT_DIR)
AC_DEFINE_UNQUOTED(OCF_ROOT_DIR,"$OCF_ROOT_DIR", OCF root directory - specified by the OCF standard)
OCF_RA_DIR="${OCF_ROOT_DIR}/resource.d/"
AC_SUBST(OCF_RA_DIR)
AC_DEFINE_UNQUOTED(OCF_RA_DIR,"$OCF_RA_DIR", Location for OCF RAs)
LSB_RA_DIR="${INITDIR}"
AC_SUBST(LSB_RA_DIR)
AC_DEFINE_UNQUOTED(LSB_RA_DIR,"$LSB_RA_DIR", Location for LSB RAs)
STONITH_RA_DIR="${hb_libdir}/stonith.d/"
AC_SUBST(STONITH_RA_DIR)
AC_DEFINE_UNQUOTED(STONITH_RA_DIR,"$STONITH_RA_DIR", Location for STONITH RAs)
AC_ARG_ENABLE([valgrind],
[ --enable-valgrind "Run selected heartbeat components using Valgrind." [default=no]],
[], [enable_valgrind=no])
AC_ARG_WITH(valgrind-log,
[ --with-valgrind-log=options Logging options to pass to valgrind],
[ VALGRIND_LOG="$withval" ],
[])
AC_ARG_WITH(valgrind-suppress,
[ --with-valgrind-suppress=file Name of a suppression file to pass to Valgrind [default=/dev/null]],
[ VALGRIND_SUPP="$withval" ],
[ VALGRIND_SUPP="/dev/null" ])
if test "x" = "x$VALGRIND_LOG"; then
VALGRIND_LOG="--log-socket=127.0.0.1:1234"
AC_MSG_NOTICE(Set default Valgrind options to: $VALGRIND_OPTS)
AC_MSG_NOTICE(Remember to start a receiver on localhost:1234)
fi
AC_PATH_PROG(VALGRIND_BIN, valgrind)
if test "xyes" = "x$enable_valgrind" -a "x$VALGRIND_BIN" != "x"; then
enable_libc_malloc=yes
fi
AC_DEFINE_UNQUOTED(VALGRIND_BIN, "$VALGRIND_BIN", Valgrind command)
AC_DEFINE_UNQUOTED(VALGRIND_LOG, "$VALGRIND_LOG", Valgrind logging options)
AC_DEFINE_UNQUOTED(VALGRIND_SUPP, "$VALGRIND_SUPP", Name of a suppression file to pass to Valgrind)
AC_ARG_ENABLE([libc-malloc],
[ --enable-libc-malloc Use libc malloc instead of Heartbeat's custom one. [default=no]],
[], [enable_libc_malloc=no])
if test "xyes" = "x$enable_libc_malloc" -o "x1" = "x$enable_libc_malloc"; then
AC_DEFINE_UNQUOTED(CL_USE_LIBC_MALLOC, 1, Use libc malloc instead of Heartbeat's custom one.)
fi
dnl **********************************************************************
dnl 'AWK' had been determined via 'aclocal.m4' as the simple name, using
dnl the current PATH (i.e. in the context of 'configure').
dnl
dnl Things within heartbeat will use 'AWK', but from a different context,
dnl so we should determine, and substitute, the full path.
dnl
dnl Note: Even that may have a flaw, e.g. if 'configure' finds (say) 'gawk',
dnl which we here convert to '/path/to/gawk', but the run-time machine lacks it.
dnl We won't worry about that for now.
dnl (David Lee; March 2007)
AC_PATH_PROGS([AWK], $AWK)
dnl **********************************************************************
dnl Enable optional, experimental directories here...
dnl
XPERIMENTALDIRS=""
AC_SUBST(XPERIMENTALDIRS)
CheckMissingThings
dnl Options for cleaning up the compiler output
PRETTY_CC=""
QUIET_LIBTOOL_OPTS=""
QUIET_MAKE_OPTS=""
if test x"${enable_pretty}" = "xyes"; then
enable_quiet="yes"
echo "install_sh: ${install_sh}"
PRETTY_CC="`pwd`/tools/ccdv"
dnl It would be nice if this was rebuilt when needed too...
mkdir `pwd`/tools/ 2>/dev/null
gcc $CFLAGS -o `pwd`/tools/ccdv ${srcdir}/tools/ccdv.c
CC="\$(PRETTY_CC) ${CC}"
fi
if test "x${enable_quiet}" = "xyes"; then
QUIET_LIBTOOL_OPTS="--quiet"
QUIET_MAKE_OPTS="--quiet"
fi
AC_MSG_RESULT(Supressing make details: ${enable_quiet})
AC_MSG_RESULT(Pretty printing of compiler output: ${enable_pretty})
dnl Put the above variables to use
LIBTOOL="${LIBTOOL} --tag=CC \$(QUIET_LIBTOOL_OPTS)"
MAKE="${MAKE} \$(QUIET_MAKE_OPTS)"
AC_SUBST(CC)
AC_SUBST(MAKE)
AC_SUBST(LIBTOOL)
AC_SUBST(PRETTY_CC)
AC_SUBST(QUIET_MAKE_OPTS)
AC_SUBST(QUIET_LIBTOOL_OPTS)
dnl *** "echo" adjustments (begin) ***
dnl Some run-time scripts require options to "echo".
dnl This configure is already determining and using "ac_n" and "ac_c"
dnl for internal use, so make available externally.
dnl (Not sure how "future proof" this is, but it at least seems clean.)
dnl
dnl This must be close to the end of "configure.in" otherwise it interferes
dnl with output from the AC_MSG_*() macros.
ECHO_N="$ac_n"
ECHO_C="$ac_c"
case $ac_n in
-n) ECHO_E="-e";;
*) ECHO_E="";;
esac
ECHO_CMD="echo"
if
test -x /usr/linux/bin/echo
then
# This is for AIX. I'm not sure it's necessary...
ECHO_CMD="/usr/linux/bin/echo"
ECHO_N="-n"
ECHO_E="-e"
fi
AC_SUBST(ECHO_N)
AC_SUBST(ECHO_C)
AC_SUBST(ECHO_E)
AC_SUBST(ECHO_CMD)
dnl *** "echo" adjustments (end) ***
dnl The Makefiles and shell scripts we output
AC_CONFIG_FILES(heartbeat.spec \
Makefile \
README \
logd/Makefile \
config/Makefile \
cts/Makefile \
cts/CM_fs.py \
cts/CM_hb.py \
cts/CTS.py \
cts/CTSaudits.py \
cts/CTSlab.py \
cts/CTStests.py \
cts/CM_LinuxHAv2.py \
cts/CTSproxy.py \
cts/extracttests.py \
cts/getpeinputs.sh \
cts/OCFIPraTest.py \
cts/CIB.py \
cts/LSBDummy \
crm/Makefile \
crm/cib/Makefile \
crm/crmd/Makefile \
crm/pengine/Makefile \
crm/tengine/Makefile \
crm/admin/Makefile \
crm/admin/crm_primitive.py \
crm/admin/crm_sh \
crm/admin/crm_utils.py \
crm/admin/crm_commands.py \
debian/Makefile \
doc/Makefile \
doc/startstop \
doc/cibadmin.8 \
doc/crm_resource.8 \
contrib/Makefile \
contrib/ipfail/Makefile \
contrib/mlock/Makefile \
contrib/drbd-outdate-peer/Makefile \
include/Makefile \
include/clplumbing/Makefile \
include/crm/Makefile \
include/crm/common/Makefile \
include/crm/pengine/Makefile \
include/lrm/Makefile \
include/mgmt/Makefile \
include/ocf/Makefile \
include/pils/Makefile \
include/pils/plugin.h \
include/saf/Makefile \
include/stonith/Makefile \
include/fencing/Makefile \
replace/Makefile \
lib/Makefile \
lib/apphb/Makefile \
lib/clplumbing/Makefile \
lib/hbclient/Makefile \
lib/crm/Makefile \
lib/crm/common/Makefile \
lib/crm/cib/Makefile \
lib/crm/pengine/Makefile \
lib/crm/transition/Makefile \
lib/lrm/Makefile \
lib/mgmt/Makefile \
lib/pils/Makefile \
lib/plugins/Makefile \
lib/plugins/InterfaceMgr/Makefile \
lib/plugins/HBauth/Makefile \
lib/plugins/HBcomm/Makefile \
lib/plugins/lrm/Makefile \
lib/plugins/stonith/Makefile \
lib/plugins/stonith/ribcl.py \
lib/plugins/stonith/external/Makefile \
lib/plugins/stonith/external/ibmrsa \
lib/plugins/stonith/external/riloe \
lib/plugins/stonith/external/ssh \
lib/plugins/AppHBNotification/Makefile \
lib/plugins/HBcompress/Makefile \
lib/plugins/quorum/Makefile \
lib/plugins/quorumd/Makefile \
lib/plugins/tiebreaker/Makefile \
lib/recoverymgr/Makefile \
lib/stonith/Makefile \
lib/fencing/Makefile \
lrm/Makefile \
lrm/lrmd/Makefile \
lrm/admin/Makefile \
lrm/test/LRMBasicSanityCheck \
lrm/test/Makefile \
lrm/test/simple_ops \
mgmt/Makefile \
mgmt/daemon/Makefile \
mgmt/client/Makefile \
mgmt/client/haclient.py \
mgmt/client/mgmtcmd.py \
heartbeat/Makefile \
heartbeat/shellfuncs \
heartbeat/rc.d/Makefile \
heartbeat/rc.d/ask_resources \
heartbeat/rc.d/hb_takeover \
heartbeat/init.d/Makefile \
heartbeat/init.d/heartbeat \
heartbeat/lib/Makefile \
heartbeat/lib/BasicSanityCheck \
heartbeat/lib/ha_config \
heartbeat/lib/ha_propagate \
heartbeat/lib/hb_standby \
heartbeat/lib/mach_down \
heartbeat/lib/req_resource \
heartbeat/lib/ResourceManager \
heartbeat/lib/TestHeartbeatComm \
heartbeat/lib/hb_takeover \
heartbeat/lib/hb_addnode \
heartbeat/lib/hb_delnode \
heartbeat/lib/hb_setweight \
heartbeat/lib/hb_setsite \
heartbeat/libnet_util/Makefile \
heartbeat/logrotate.d/Makefile \
ldirectord/Makefile \
ldirectord/ldirectord \
ldirectord/init.d/Makefile \
ldirectord/init.d/ldirectord \
ldirectord/init.d/ldirectord.debian \
ldirectord/init.d/ldirectord.debian.default \
ldirectord/logrotate.d/Makefile \
ldirectord/OCF/Makefile \
ldirectord/OCF/ldirectord \
membership/Makefile \
membership/ccm/Makefile \
membership/quorumd/Makefile \
pkg/Makefile \
pkg/InfoFiles/pkginfo \
pkg/InfoFiles/preinstall \
pkg/InfoFiles/postinstall \
port/Makefile \
port/portMakefile \
port/heartbeat/pkg-deinstall \
port/heartbeat/pkg-descr \
port/heartbeat/pkg-install \
port/heartbeat/pkg-plist \
snmp_subagent/Makefile \
snmp_subagent/SNMPAgentSanityCheck \
cim/Makefile \
cim/mof/Makefile \
cim/mof/register_providers.sh \
cim/mof/unregister_providers.sh \
tsa_plugin/Makefile \
tsa_plugin/testrun.sh \
tsa_plugin/linuxha-adapter \
telecom/Makefile \
telecom/apphbd/Makefile \
telecom/recoverymgrd/Makefile \
fencing/Makefile \
fencing/stonithd/Makefile \
fencing/test/Makefile \
fencing/test/STONITHDBasicSanityCheck \
tools/Makefile \
tools/haresources2cib.py \
resources/Makefile \
resources/OCF/Makefile \
resources/OCF/.ocf-binaries \
resources/OCF/.ocf-directories \
resources/OCF/.ocf-shellfuncs \
resources/OCF/ocf-returncodes \
resources/OCF/ocf-shellfuncs \
resources/heartbeat/Makefile \
resources/heartbeat/apache \
resources/heartbeat/AudibleAlarm \
resources/heartbeat/Delay \
resources/heartbeat/db2 \
resources/heartbeat/Filesystem \
resources/heartbeat/hto-mapfuncs \
resources/heartbeat/ICP \
resources/heartbeat/IPaddr \
resources/heartbeat/IPaddr2 \
resources/heartbeat/IPsrcaddr \
resources/heartbeat/IPv6addr \
resources/heartbeat/LinuxSCSI \
resources/heartbeat/LVM \
resources/heartbeat/LVSSyncDaemonSwap \
resources/heartbeat/MailTo \
resources/heartbeat/OCF \
resources/heartbeat/portblock \
resources/heartbeat/Raid1 \
resources/heartbeat/ServeRAID \
resources/heartbeat/SendArp \
resources/heartbeat/WAS \
resources/heartbeat/WinPopup \
resources/heartbeat/Xinetd \
)
dnl Now process the entire list of files added by previous
dnl calls to AC_CONFIG_FILES()
AC_OUTPUT()
dnl subpackages configuration - perhaps configure it properly some other time
dnl when it has been discussed at linux-ha-dev
dnl AC_CONFIG_SUBDIRS(stonith heartbeat)
dnl *****************
dnl Configure summary
dnl *****************
eval my_datadir="`eval echo ${datadir}`"
eval my_includedir="`eval echo ${includedir}`"
eval my_initdir="${INITDIR}"
eval my_libdir="`eval echo ${libdir}`"
eval my_localstatedir="`eval echo ${localstatedir}`"
eval my_mandir="`eval echo ${mandir}`"
eval my_sbindir="`eval echo ${sbindir}`"
eval my_sysconfdir="`eval echo ${sysconfdir}`"
AC_MSG_RESULT([])
AC_MSG_RESULT([$PACKAGE configuration:])
AC_MSG_RESULT([ Version = "$VERSION"])
-AC_MSG_RESULT([ Executables = "$my_sbindir"])
-AC_MSG_RESULT([ Man pages = "$my_mandir"])
-AC_MSG_RESULT([ Libraries = "$my_libdir"])
-AC_MSG_RESULT([ Header files = "$my_includedir"])
-AC_MSG_RESULT([ Data files = "$my_datadir"])
-AC_MSG_RESULT([ State information = "$my_localstatedir"])
-AC_MSG_RESULT([ System configuration = "$my_sysconfdir"])
-AC_MSG_RESULT([ Init (rc) scripts = "$my_initdir"])
+AC_MSG_RESULT([ Executables = "$my_sbindir"])
+AC_MSG_RESULT([ Man pages = "$my_mandir"])
+AC_MSG_RESULT([ Libraries = "$my_libdir"])
+AC_MSG_RESULT([ Header files = "$my_includedir"])
+AC_MSG_RESULT([ Arch-independent files = "$my_datadir"])
+AC_MSG_RESULT([ State information = "$my_localstatedir"])
+AC_MSG_RESULT([ System configuration = "$my_sysconfdir"])
+AC_MSG_RESULT([ Init (rc) scripts = "$my_initdir"])
-AC_MSG_RESULT([ Use system LTDL = "${ac_cv_lib_ltdl_lt_dlopen}"])
+AC_MSG_RESULT([ Use system LTDL = "${ac_cv_lib_ltdl_lt_dlopen}"])
-AC_MSG_RESULT([ HA group name = "${HA_APIGROUP}"])
-AC_MSG_RESULT([ HA group id = "${HA_APIGID}"])
-AC_MSG_RESULT([ HA user name = "${HA_CCMUSER}"])
-AC_MSG_RESULT([ HA user user id = "${HA_CCMUID}"])
+AC_MSG_RESULT([ HA group name = "${HA_APIGROUP}"])
+AC_MSG_RESULT([ HA group id = "${HA_APIGID}"])
+AC_MSG_RESULT([ HA user name = "${HA_CCMUSER}"])
+AC_MSG_RESULT([ HA user user id = "${HA_CCMUID}"])
AC_MSG_RESULT([ Build snmp subagent = "${enable_snmp_subagent}"])
if test "x${enable_snmp_subagent}" = "xyes"; then
- AC_MSG_RESULT([ SNMP MIB directory = "${MIBS_DIR}"])
- AC_MSG_RESULT([ SNMP agent libraries = "${SNMPAGENTLIB}"])
+ AC_MSG_RESULT([ SNMP MIB directory = "${MIBS_DIR}"])
+ AC_MSG_RESULT([ SNMP agent libraries = "${SNMPAGENTLIB}"])
fi
-AC_MSG_RESULT([ SNMP libraries = "${SNMPLIB}"])
-AC_MSG_RESULT([ ucd_snmp_devel name = "${UCDSNMPDEVEL}"])
+AC_MSG_RESULT([ SNMP libraries = "${SNMPLIB}"])
+AC_MSG_RESULT([ ucd_snmp_devel name = "${UCDSNMPDEVEL}"])
-AC_MSG_RESULT([ Build New CRM = "${enable_crm}"])
-AC_MSG_RESULT([ Build New LRM = "${enable_lrm}"])
-AC_MSG_RESULT([ Build Ldirectord = "${enable_ldirectord}"])
+AC_MSG_RESULT([ Build New CRM = "${enable_crm}"])
+AC_MSG_RESULT([ Build New LRM = "${enable_lrm}"])
+AC_MSG_RESULT([ Build Ldirectord = "${enable_ldirectord}"])
-AC_MSG_RESULT([ Build CIM providers = "${enable_cim_provider}"])
+AC_MSG_RESULT([ Build CIM providers = "${enable_cim_provider}"])
if test "x${enable_cim_provider}" = "xyes"; then
- AC_MSG_RESULT([ CIM server = "${CIMOM}"])
- AC_MSG_RESULT([ CIM providers dir = "${CMPI_PROVIDER_DIR}"])
- AC_MSG_RESULT([ CMPI header files = "${CMPI_HEADER_PATH}"])
+ AC_MSG_RESULT([ CIM server = "${CIMOM}"])
+ AC_MSG_RESULT([ CIM providers dir = "${CMPI_PROVIDER_DIR}"])
+ AC_MSG_RESULT([ CMPI header files = "${CMPI_HEADER_PATH}"])
fi
-AC_MSG_RESULT([ Build TSA plugin = "${enable_tsa_plugin}"])
+AC_MSG_RESULT([ Build TSA plugin = "${enable_tsa_plugin}"])
if test "x${enable_tsa_plugin}" != "xno"; then
-AC_MSG_RESULT([ JAVA_HOME = "${JAVA_HOME}"])
-AC_MSG_RESULT([ TSA_DIR = "${TSA_DIR}"])
+AC_MSG_RESULT([ JAVA_HOME = "${JAVA_HOME}"])
+AC_MSG_RESULT([ TSA_DIR = "${TSA_DIR}"])
fi
-AC_MSG_RESULT([ Build dopd plugin = "${enable_dopd}"])
+AC_MSG_RESULT([ Build dopd plugin = "${enable_dopd}"])
-AC_MSG_RESULT([ Enable times kludge = "${enable_times_kludge}"])
+AC_MSG_RESULT([ Enable times kludge = "${enable_times_kludge}"])
AC_SUBST(DISABLE_TIMES_KLUDGE)
-AC_MSG_RESULT([ CC_WARNINGS = "${CC_WARNINGS}"])
-AC_MSG_RESULT([ Mangled CFLAGS = "${CFLAGS}"])
-AC_MSG_RESULT([ Libraries = "${LIBS}"])
-AC_MSG_RESULT([ RPATH enabled = "${enable_rpath}"])
+AC_MSG_RESULT([ CC_WARNINGS = "${CC_WARNINGS}"])
+AC_MSG_RESULT([ Mangled CFLAGS = "${CFLAGS}"])
+AC_MSG_RESULT([ Libraries = "${LIBS}"])
+AC_MSG_RESULT([ RPATH enabled = "${enable_rpath}"])
AC_MSG_RESULT([ ])
AC_MSG_RESULT([Note: If you use the 'make install' method for installation you])
AC_MSG_RESULT([also need to adjust '/etc/passwd' and '/etc/group' manually.])
AC_MSG_RESULT([ ])
diff --git a/heartbeat/IPaddr b/heartbeat/IPaddr
index 581df956a..626949bbb 100644
--- a/heartbeat/IPaddr
+++ b/heartbeat/IPaddr
@@ -1,836 +1,840 @@
#!/bin/sh
#
# License: GNU General Public License (GPL)
# Support: linux-ha@lists.linux-ha.org
#
# This script manages IP alias IP addresses
#
# It can add an IP alias, or remove one.
#
# usage: $0 {start|stop|status|monitor|validate-all|meta-data}
#
# The "start" arg adds an IP alias.
#
# Surprisingly, the "stop" arg removes one. :-)
#
# OCF parameters are as below
# OCF_RESKEY_ip
# OCF_RESKEY_broadcast
# OCF_RESKEY_nic
# OCF_RESKEY_cidr_netmask
# OCF_RESKEY_lvs_support ( e.g. true, on, 1 )
# OCF_RESKEY_ARP_INTERVAL_MS
# OCF_RESKEY_ARP_REPEAT
# OCF_RESKEY_ARP_BACKGROUND (e.g. yes )
# OCF_RESKEY_ARP_NETMASK
# OCF_RESKEY_local_start_script
# OCF_RESKEY_local_stop_script
#
#######################################################################
# Initialization:
. ${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs
HA_HBCONF_DIR=${HA_DIR}
SENDARP=$HA_BIN/send_arp
FINDIF=$HA_BIN/findif
VLDIR=$HA_RSCTMP/IPaddr
SENDARPPIDDIR=$HA_RSCTMP/send_arp
SENDARPPIDFILE="$SENDARPPIDDIR/send_arp-$OCF_RESKEY_ip"
USAGE="usage: $0 {start|stop|status|monitor|validate-all|meta-data}";
#######################################################################
# Prevent ifconfig localization issues
unset LC_ALL; export LC_ALL
unset LANGUAGE; export LANGUAGE
LC_ALL=C; export LC_ALL
LC_MESSAGES=C; export LC_MESSAGES
. $HA_HBCONF_DIR/shellfuncs
SYSTYPE="`uname -s`"
case "$SYSTYPE" in
SunOS)
# `uname -r` = 5.9 -> SYSVERSION = 9
SYSVERSION="`uname -r | cut -d. -f 2`"
;;
Darwin)
# Treat Darwin the same as the other BSD variants (matched as *BSD)
SYSTYPE="${SYSTYPE}BSD"
;;
*)
;;
esac
meta_data() {
cat <<END
<?xml version="1.0"?>
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="IPaddr">
<version>1.0</version>
<longdesc lang="en">
This script manages IP alias IP addresses
It can add an IP alias, or remove one.
</longdesc>
<shortdesc lang="en">Manages virtual IPv4 addresses</shortdesc>
<parameters>
<parameter name="ip" unique="1" required="1">
<longdesc lang="en">
The IPv4 address to be configured in dotted quad notation, for example
"192.168.1.1".
</longdesc>
<shortdesc lang="en">IPv4 address</shortdesc>
<content type="string" default="" />
</parameter>
<parameter name="nic" unique="0">
<longdesc lang="en">
The base network interface on which the IP address will be brought
online.
If left empty, the script will try and determine this from the
routing table.
Do NOT specify an alias interface in the form eth0:1 or anything here;
rather, specify the base interface only.
</longdesc>
<shortdesc lang="en">Network interface</shortdesc>
<content type="string" default="eth0"/>
</parameter>
<parameter name="cidr_netmask">
<longdesc lang="en">
The netmask for the interface in CIDR format. (ie, 24), or in
dotted quad notation 255.255.255.0).
If unspecified, the script will also try to determine this from the
routing table.
</longdesc>
<shortdesc lang="en">Netmask</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="broadcast">
<longdesc lang="en">
Broadcast address associated with the IP. If left empty, the script will
determine this from the netmask.
</longdesc>
<shortdesc lang="en">Broadcast address</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="iflabel">
<longdesc lang="en">
You can specify an additional label for your IP address here.
</longdesc>
<shortdesc lang="en">Interface label</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="lvs_support">
<longdesc lang="en">
Enable support for LVS Direct Routing configurations. In case a IP
address is stopped, only move it to the loopback device to allow the
local node to continue to service requests, but no longer advertise it
on the network.
</longdesc>
<shortdesc lang="en">Enable support for LVS DR</shortdesc>
<content type="boolean" default="false"/>
</parameter>
<parameter name="local_stop_script">
<longdesc lang="en">
Script called when the IP is released
</longdesc>
<shortdesc lang="en">Script called when the IP is released</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="local_start_script">
<longdesc lang="en">
Script called when the IP is added
</longdesc>
<shortdesc lang="en">Script called when the IP is added</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="ARP_INTERVAL_MS">
<longdesc lang="en">
milliseconds between ARPs
</longdesc>
<shortdesc lang="en">milliseconds between gratuitous ARPs</shortdesc>
<content type="integer" default="500"/>
</parameter>
<parameter name="ARP_REPEAT">
<longdesc lang="en">
How many gratuitous ARPs to send out when bringing up a new address
</longdesc>
<shortdesc lang="en">repeat count</shortdesc>
<content type="integer" default="10"/>
</parameter>
<parameter name="ARP_BACKGROUND">
<longdesc lang="en">
run in background (no longer any reason to do this)
</longdesc>
<shortdesc lang="en">run in background</shortdesc>
<content type="boolean" default="yes"/>
</parameter>
<parameter name="ARP_NETMASK">
<longdesc lang="en">
netmask for ARP - in nonstandard hexadecimal format.
</longdesc>
<shortdesc lang="en">netmask for ARP</shortdesc>
<content type="string" default="ffffffffffff"/>
</parameter>
</parameters>
<actions>
<action name="start" timeout="90" />
<action name="stop" timeout="100" />
<action name="monitor" depth="10" timeout="20s" interval="5s" start-delay="1s" />
<action name="validate-all" timeout="30s" />
<action name="meta-data" timeout="5s" />
</actions>
</resource-agent>
END
exit $OCF_SUCCESS
}
# On Linux systems the (hidden) loopback interface may
# conflict with the requested IP address. If so, this
# unoriginal code will remove the offending loopback address
# and save it in VLDIR so it can be added back in later
# when the IPaddr is released.
#
lvs_remove_conflicting_loopback() {
ipaddr="$1"
ifname="$2"
ocf_log info "Removing conflicting loopback $ifname."
if
echo $ifname > "$VLDIR/$ipaddr"
then
: Saved loopback information in $VLDIR/$ipaddr
else
ocf_log err "Could not save conflicting loopback $ifname." \
"it will not be restored."
fi
- delete_interface "$ifname $ipaddr"
+ delete_interface "$ifname" "$ipaddr"
# Forcibly remove the route (if it exists) to the loopback.
delete_route "$ipaddr"
}
#
# On Linux systems the (hidden) loopback interface may
# need to be restored if it has been taken down previously
# by lvs_remove_conflicting_loopback()
#
lvs_restore_loopback() {
ipaddr="$1"
if [ ! -s "$VLDIR/$ipaddr" ]; then
return
fi
ifname=`cat "$VLDIR/$ipaddr"`
ocf_log info "Restoring loopback IP Address $ipaddr on $ifname."
CMD="OCF_RESKEY_cidr_netmask=32 OCF_RESKEY_ip=$1 OCF_RESKEY_nic=$ifname $FINDIF"
if
NICINFO=`eval $CMD`
then
netmask_text=`echo "$NICINFO" | cut -f2 -d " "`
broadcast=`echo "$NICINFO" | cut -f3 -d " "`
else
echo "ERROR: $CMD failed (rc=$rc)"
exit $OCF_ERR_GENERIC
fi
add_interface "$ipaddr" "$ifname" "$ifname" $netmask_text $broadcast
rm -f "$VLDIR/$ipaddr"
}
#
# Find out which alias serves the given IP address
# The argument is an IP address, and its output
# is an aliased interface name (e.g., "eth0:0").
#
find_interface_solaris() {
ipaddr="$1"
$IFCONFIG $IFCONFIG_A_OPT | $AWK '{if ($0 ~ /.*: / && NR > 1) {print "\n"$0} else {print}}' |
while read ifname linkstuff
do
: ifname = $ifname
read inet addr junk
: inet = $inet addr = $addr
while
read line && [ "X$line" != "X" ]
do
: Nothing
done
case $ifname in
*:*) ;;
*) continue;;
esac
# This doesn't look right for a box with multiple NICs.
# It looks like it always selects the first interface on
# a machine. Yet, we appear to use the results for this case too...
ifname=`echo "$ifname" | sed s'%:$%%'`
case $addr in
addr:$ipaddr) echo $ifname; return $OCF_SUCCESS;;
$ipaddr) echo $ifname; return $OCF_SUCCESS;;
esac
done
return $OCF_ERR_GENERIC
}
find_interface_bsd() {
#$IFCONFIG $IFCONFIG_A_OPT | grep "inet.*[: ]$OCF_RESKEY_ip "
$IFCONFIG | grep "$ipaddr" -B20 | grep "UP," | tail -n 1 | cut -d ":" -f 1
}
#
# Find out which alias serves the given IP address
# The argument is an IP address, and its output
# is an aliased interface name (e.g., "eth0:0").
#
find_interface_generic() {
ipaddr="$1"
$IFCONFIG $IFCONFIG_A_OPT |
while read ifname linkstuff
do
: Read gave us ifname = $ifname
read inet addr junk
: Read gave us inet = $inet addr = $addr
while
read line && [ "X$line" != "X" ]
do
: Nothing
done
case $ifname in
*:*) ;;
*) continue;;
esac
: "comparing $ipaddr to $addr (from ifconfig)"
case $addr in
addr:$ipaddr) echo $ifname; return $OCF_SUCCESS;;
$ipaddr) echo $ifname; return $OCF_SUCCESS;;
esac
done
return $OCF_ERR_GENERIC
}
#
# Find out which alias serves the given IP address
# The argument is an IP address, and its output
# is an aliased interface name (e.g., "eth0:0").
#
find_interface() {
ipaddr="$1"
case "$SYSTYPE" in
SunOS)
NIC=`find_interface_solaris $ipaddr`;;
*BSD)
NIC=`find_interface_bsd $ipaddr`;;
*)
NIC=`find_interface_generic $ipaddr`;;
esac
echo $NIC
return $OCF_SUCCESS;
}
#
# Find an unused interface/alias name for us to use for new IP alias
# The argument is an IP address, and the output
# is an aliased interface name (e.g., "eth0:0", "dc0", "le0:0").
#
find_free_interface() {
NIC="$1"
if [ "X$NIC" = "X" ]; then
ocf_log err "No free interface found for $OCF_RESKEY_ip"
return $OCF_ERR_GENERIC;
fi
NICBASE="$VLDIR/$NIC"
touch "$NICBASE"
case "$SYSTYPE" in
*BSD)
echo $NIC;
return $OCF_SUCCESS;;
SunOS)
j=1
IFLIST=`$IFCONFIG $IFCONFIG_A_OPT | \
grep "^$NIC:[0-9]" | sed 's%: .*%%'`;;
*)
j=0
IFLIST=`$IFCONFIG $IFCONFIG_A_OPT | \
grep "^$NIC:[0-9]" | sed 's% .*%%'`
TRYADRCNT=`ls "${NICBASE}:"* 2>/dev/null | wc -w | tr -d ' '`
if [ -f "${NICBASE}:${TRYADRCNT}" ]; then
: OK
else
j="${TRYADRCNT}"
fi
;;
esac
IFLIST=" `echo $IFLIST` "
while
[ $j -lt 512 ]
do
case $IFLIST in
*" "$NIC:$j" "*)
;;
*)
NICLINK="$NICBASE:$j"
if
ln "$NICBASE" "$NICLINK" 2>/dev/null
then
echo "$NIC:$j"
return $OCF_SUCCESS
fi
;;
esac
j=`expr $j + 1`
done
return $OCF_ERR_GENERIC
}
delete_route () {
ipaddr="$1"
case "$SYSTYPE" in
SunOS) return 0;;
*BSD) CMD="$ROUTE -n delete -host $ipaddr";;
*) CMD="$ROUTE -n del -host $ipaddr";;
esac
$CMD
return $?
}
delete_interface () {
ifname="$1"
ipaddr="$2"
case "$SYSTYPE" in
SunOS)
if [ "$SYSVERSION" -ge 8 ] ; then
CMD="$IFCONFIG $ifname unplumb"
else
CMD="$IFCONFIG $ifname 0 down"
fi;;
Darwin*)
CMD="$IFCONFIG $ifname $ipaddr delete";;
*BSD)
CMD="$IFCONFIG $ifname inet $ipaddr delete";;
*)
CMD="$IFCONFIG $ifname down";;
esac
ocf_log info "$CMD"
$CMD
return $?
}
add_interface () {
ipaddr="$1"
iface_base="$2"
iface="$3"
netmask="$4"
broadcast="$5"
if [ $# != 5 ]; then
ocf_log err "Insufficient arguments to add_interface: $*"
exit $OCF_ERR_ARGS
fi
case "$SYSTYPE" in
SunOS)
if [ "$SYSVERSION" -ge 8 ] ; then
$IFCONFIG $iface plumb
rc=$?
if [ $rc -ne 0 ] ; then
echo "ERROR: '$IFCONFIG $iface plumb' failed."
return $rc
fi
fi
# At Solaris 10, this single-command version sometimes broke.
# Almost certainly an S10 bug.
# CMD="$IFCONFIG $iface inet $ipaddr $text up"
# So hack the following workaround:
CMD="$IFCONFIG $iface inet $ipaddr"
CMD="$CMD && $IFCONFIG $iface netmask $netmask"
CMD="$CMD && $IFCONFIG $iface up"
;;
*BSD)
# netmask is always set to 255.255.255.255 for an alias
CMD="$IFCONFIG $iface inet $ipaddr netmask 255.255.255.255 alias";;
*)
CMD="$IFCONFIG $iface $ipaddr netmask $netmask broadcast $broadcast";;
esac
# Use "eval $CMD" (not "$CMD"): it might be a chain of two or more commands.
ocf_log info "eval $CMD"
eval $CMD
rc=$?
if [ $rc != 0 ]; then
echo "ERROR: eval $CMD failed (rc=$rc)"
fi
return $rc
}
#
# Remove the IP alias for the requested IP address...
#
ip_stop() {
+ echo "In IP Stop"
SENDARPPIDFILE="$SENDARPPIDDIR/send_arp-$OCF_RESKEY_ip"
NIC=`find_interface $OCF_RESKEY_ip`
if [ -f "$SENDARPPIDFILE" ]; then
cat "$SENDARPPIDFILE" | xargs kill
rm -f "$SENDARPPIDFILE"
fi
if [ -z "$NIC" ]; then
: Requested interface not in use
return $OCF_SUCCESS
fi
if [ ${OCF_RESKEY_lvs_support} = 1 ]; then
case $NIC in
lo*)
: Requested interface is on loopback
return $OCF_SUCCESS;;
esac
fi
delete_route "$OCF_RESKEY_ip"
- delete_interface "$NIC $OCF_RESKEY_ip"
+ delete_interface "$NIC" "$OCF_RESKEY_ip"
rc=$?
if [ ${OCF_RESKEY_lvs_support} = 1 ]; then
lvs_restore_loopback "$OCF_RESKEY_ip"
fi
# remove lock file...
rm -f "$VLDIR/$NIC"
if [ $rc != 0 ]; then
ocf_log warn "IP Address $OCF_RESKEY_ip NOT released"
fi
return $rc
}
#
# Add an IP alias for the requested IP address...
#
# It could be that we already have taken it, in which case it should
# do nothing.
#
ip_start() {
#
# Do we already service this IP address?
#
ip_status_internal
if [ $? = $OCF_SUCCESS ]; then
# Nothing to do, the IP is already active
return $OCF_SUCCESS;
fi
NIC_unique=`find_free_interface $OCF_RESKEY_nic`
if [ -n "$NIC_unique" ]; then
: OK got interface [$NIC_unique] for $OCF_RESKEY_ip
else
return $OCF_ERR_GENERIC
fi
# This logic is mostly to support LVS (If I understand it correctly)
if [ ${OCF_RESKEY_lvs_support} = 1 ]; then
NIC_current=`find_interface $OCF_RESKEY_ip`
case $NIC_unique in
lo*)
if [ x"$NIC_unique" = x"$NIC_current" ]; then
# Its already "running" and not moving, nothing to do.
ocf_log err "Could not find a non-loopback device to move $OCF_RESKEY_ip to"
return $OCF_ERR_GENERIC
fi;;
*) lvs_remove_conflicting_loopback "$OCF_RESKEY_ip" "$NIC_current";;
esac
fi
add_interface "$OCF_RESKEY_ip" "$OCF_RESKEY_nic" "$NIC_unique" \
"$OCF_RESKEY_cidr_netmask" "$OCF_RESKEY_broadcast"
rc=$?
if [ $rc != 0 ]; then
ocf_log err "Could not add $OCF_RESKEY_ip to $OCF_RESKEY_nic: $rc"
return $rc
fi
# The address is active, now notify others about it using sendarp
if [ "$SYSTYPE" = "DarwinBSD" -a "$NIC_unique" = "lo0" ]; then
# Darwin can't send ARPs on loopback devices
SENDARP=""
fi
if [ x$SENDARP != x ]; then
TARGET_INTERFACE=`echo $NIC_unique | sed 's%:.*%%'`
SENDARPPIDFILE="$SENDARPPIDDIR/send_arp-$OCF_RESKEY_ip"
ARGS="-i $OCF_RESKEY_ARP_INTERVAL_MS -r $OCF_RESKEY_ARP_REPEAT"
ARGS="$ARGS -p $SENDARPPIDFILE $TARGET_INTERFACE $OCF_RESKEY_ip"
ARGS="$ARGS auto $OCF_RESKEY_ip $OCF_RESKEY_ARP_NETMASK"
ocf_log debug "Sending Gratuitous Arp for $OCF_RESKEY_ip on $NIC_unique [$TARGET_INTERFACE]"
case $OCF_RESKEY_ARP_BACKGROUND in
yes) ($SENDARP $ARGS || ocf_log err "Could not send gratuitous arps. rc=$?" & ) >&2 ;;
*) $SENDARP $ARGS || ocf_log err "Could not send gratuitous arps. rc=$?";;
esac
fi
ip_status_internal
return $?
}
ip_status_internal() {
NIC=`find_interface "$OCF_RESKEY_ip"`
if [ "x$NIC" = x ]; then
return $OCF_NOT_RUNNING
elif [ "${OCF_RESKEY_lvs_support}" = "1" ]; then
case $NIC in
lo*) return $OCF_NOT_RUNNING;;
*) return $OCF_SUCCESS;;
esac
else
if [ x$OCF_RESKEY_nic != x ]; then
simple_OCF_NIC=`echo $OCF_RESKEY_nic | awk -F: '{print $1}'`
simple_NIC=`echo $NIC | awk -F: '{print $1}'`
if [ $simple_OCF_NIC != $simple_NIC ]; then
ocf_log err "$OCF_RESKEY_ip is running an interface ($simple_NIC) instead of the configured one ($simple_OCF_NIC)"
return $OCF_ERR_GENERIC
fi
fi
return $OCF_SUCCESS
fi
}
ip_status() {
ip_status_internal
rc=$?
if [ $rc = $OCF_SUCCESS ]; then
echo "running"
elif [ $rc = $OCF_NOT_RUNNING ]; then
echo "stopped"
else
echo "unknown"
fi
return $rc;
}
#
# Determine if this IP address is really being served, or not.
# Note that we must distinguish if *we're* serving it locally...
#
ip_monitor() {
ip_status_internal
rc=$?
if [ $OCF_CHECK_LEVEL = 0 -o $rc != 0 ]; then
return $rc
fi
ocf_log info "Checking IP stack"
PINGARGS="`pingargs $OCF_RESKEY_ip`"
for j in 1 2 3 4 5 6 7 8 9 10; do
if $PING $PINGARGS >/dev/null 2>&1 ; then
return $OCF_SUCCESS
fi
done
return $OCF_ERR_GENERIC
}
is_positive_integer() {
ocf_is_decimal $1 && [ $1 -ge 1 ]
if [ $? = 0 ]; then
return 1
fi
return 0
}
ip_validate_all() {
: ${OCF_RESKEY_ARP_BACKGROUND=yes}
: ${OCF_RESKEY_ARP_NETMASK=ffffffffffff}
: ${OCF_RESKEY_ARP_INTERVAL_MS=500}
: ${OCF_RESKEY_ARP_REPEAT=10}
check_binary $AWK
check_binary $IFCONFIG
check_binary $ROUTE
check_binary $PING
if
[ -d "$VLDIR/" ] || mkdir -p "$VLDIR/"
then
: Directory $VLDIR now exists
else
ocf_log err "Could not create \"$VLDIR/\"."
return $OCF_ERR_GENERIC
fi
if is_positive_integer $OCF_RESKEY_ARP_INTERVAL_MS
then
ocf_log err "Invalid parameter value: ARP_INTERVAL_MS [$OCF_RESKEY_ARP_INTERVAL_MS]"
return $OCF_ERR_ARGS
fi
if is_positive_integer $OCF_RESKEY_ARP_REPEAT
then
ocf_log err "Invalid parameter value: ARP_REPEAT [$OCF_RESKEY_ARP_REPEAT]"
return $OCF_ERR_ARGS
fi
: ${OCF_RESKEY_lvs_support=0}
if [ "$SYSTYPE" = "Linux" -o "$SYSTYPE" = "SunOS" ]; then
:
else
if [ "${OCF_RESKEY_lvs_support}" = "1" ]; then
ocf_log err "$SYSTYPE does not support LVS"
return $OCF_ERR_GENERIC
fi
fi
case $OCF_RESKEY_ip in
"") ocf_log err "Required parameter OCF_RESKEY_ip is missing"
return $OCF_ERR_CONFIGURED;;
[0-9]*.[0-9]*.[0-9]*.*[0-9]) : OK;;
*) ocf_log err "Parameter OCF_RESKEY_ip [$OCF_RESKEY_ip] not an IP address"
return $OCF_ERR_CONFIGURED;;
esac
# Unconditionally do this?
case $OCF_RESKEY_nic in
*:*)
OCF_RESKEY_nic=`echo $OCF_RESKEY_nic | sed 's/:.*//'`
;;
esac
NICINFO=`$FINDIF`
rc=$?
if [ $rc != 0 ]; then
ocf_log err "$FINDIF failed [rc=$rc]."
return $OCF_ERR_GENERIC
fi
tmp=`echo "$NICINFO" | cut -f1`
- if [ "x$OCF_RESKEY_nic" = "x" ]; then
- ocf_log info "Using calculated nic for ${OCF_RESKEY_ip}: $tmp"
- OCF_RESKEY_nic=$tmp
-
- elif [ x$tmp != x${OCF_RESKEY_nic} ]; then
- ocf_log err "Invalid parameter value: nic [$OCF_RESKEY_nic [Calculated nic: $tmp]"
- return $OCF_ERR_ARGS
+ if
+ [ "x$OCF_RESKEY_nic" = "x" ]
+ then
+ ocf_log info "Using calculated nic for ${OCF_RESKEY_ip}: $tmp"
+ OCF_RESKEY_nic=$tmp
+ elif
+ [ x$tmp != x${OCF_RESKEY_nic} ]
+ then
+ ocf_log err "Invalid parameter value: nic [$OCF_RESKEY_nic] Calculated nic: [$tmp]"
+ return $OCF_ERR_ARGS
fi
tmp=`echo "$NICINFO" | cut -f2 | cut -d ' ' -f2`
if
- [ -z "$OCF_RESKEY_cidr_netmask" ]
+ [ "x$OCF_RESKEY_cidr_netmask" != "x$tmp" ]
then
- ocf_log debug "Using calculated netmask for ${OCF_RESKEY_ip}: $tmp"
- OCF_RESKEY_cidr_netmask=$tmp; export OCF_RESKEY_cidr_netmask
- elif [ "x$OCF_RESKEY_netmask" != "x$tmp" ]; then
- ocf_log info "Using calculated netmask for ${OCF_RESKEY_ip}: $tmp"
+ ocf_log info "Using calculated netmask for ${OCF_RESKEY_ip}: $tmp"
fi
# Always use the calculated version becuase it might have been specified
# using CIDR notation which not every system accepts
OCF_RESKEY_netmask=$tmp
+ OCF_RESKEY_cidr_netmask=$tmp; export OCF_RESKEY_cidr_netmask
tmp=`echo "$NICINFO" | cut -f3 | cut -d ' ' -f2`
- if [ "x$OCF_RESKEY_broadcast" = "x" ]; then
- ocf_log debug "Using calculated broadcast for ${OCF_RESKEY_ip}: $tmp"
- OCF_RESKEY_broadcast=$tmp
+ if
+ [ "x$OCF_RESKEY_broadcast" = "x" ]
+ then
+ ocf_log debug "Using calculated broadcast for ${OCF_RESKEY_ip}: $tmp"
+ OCF_RESKEY_broadcast=$tmp
elif [ x$tmp != x${OCF_RESKEY_broadcast} ]; then
- ocf_log err "Invalid parameter value: broadcast [$OCF_RESKEY_broadcast [Calculated broadcast: $tmp]"
- return $OCF_ERR_ARGS
+ ocf_log err "Invalid parameter value: broadcast [$OCF_RESKEY_broadcast] Calculated broadcast: [$tmp]"
+ return $OCF_ERR_ARGS
fi
return $OCF_SUCCESS
}
usage() {
echo $USAGE >&2
return $1
}
if [ $# -ne 1 ]; then
usage $OCF_ERR_ARGS
fi
: ${OCF_RESKEY_lvs_support=0}
# Normalize the value of lvs_support
if [ "${OCF_RESKEY_lvs_support}" = "true" \
-o "${OCF_RESKEY_lvs_support}" = "on" \
-o "${OCF_RESKEY_lvs_support}" = "yes" \
-o "${OCF_RESKEY_lvs_support}" = "1" ]; then
OCF_RESKEY_lvs_support=1
else
OCF_RESKEY_lvs_support=0
fi
# Note: We had a version out there for a while which used
# netmask instead of cidr_netmask. So, don't remove this aliasing code!
if
[ ! -z "$OCF_RESKEY_netmask" -a -z "$OCF_RESKEY_cidr_netmask" ]
then
OCF_RESKEY_cidr_netmask=$OCF_RESKEY_netmask
export OCF_RESKEY_cidr_netmask
fi
case $1 in
meta-data) meta_data;;
start) ip_validate_all && ip_start;;
stop) ip_stop;;
status) ip_status;;
monitor) ip_monitor;;
validate-all) ip_validate_all;;
usage) usage $OCF_SUCCESS;;
*) usage $OCF_ERR_UNIMPLEMENTED;;
esac
exit $?
diff --git a/heartbeat/MailTo b/heartbeat/MailTo
index 4b4b9d4a5..9a6c2c8e0 100644
--- a/heartbeat/MailTo
+++ b/heartbeat/MailTo
@@ -1,209 +1,209 @@
#!/bin/sh
#
# Resource script for MailTo
#
# Author: Alan Robertson <alanr@unix.sh>
#
# Description: sends email to a sysadmin whenever a takeover occurs.
#
# Note: This command requires an argument, unlike normal init scripts.
#
# This can be given in the haresources file as:
#
# You can also give a mail subject line or even multiple addresses
# MailTo::alanr@unix.sh::BigImportantWebServer
# MailTo::alanr@unix.sh,spoppi@gmx.de::BigImportantWebServer
#
# This will then be put into the message subject and body.
#
# OCF parameters are as below:
# OCF_RESKEY_email
# OCF_RESKEY_subject
#
# License: GNU General Public License (GPL)
#
# Copyright: (C) 2005 International Business Machines
#######################################################################
# Initialization:
. ${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs
#######################################################################
ARGS="$0 $*"
us=`uname -n`
usage() {
echo "Usage: $0 {start|stop|status|monitor|meta-data|validate-all}"
}
meta_data() {
cat <<END
<?xml version="1.0"?>
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="MailTo">
<version>1.0</version>
<longdesc lang="en">
This is a resource agent for MailTo. It sends email to a sysadmin whenever
a takeover occurs.
</longdesc>
<shortdesc lang="en">MailTo resource agent</shortdesc>
<parameters>
<parameter name="email" unique="0" required="1">
<longdesc lang="en">
The email address of sysadmin.
</longdesc>
<shortdesc lang="en">Email address</shortdesc>
<content type="string" default="" />
</parameter>
<parameter name="subject" unique="0">
<longdesc lang="en">
The subject of the email.
</longdesc>
<shortdesc lang="en">Subject</shortdesc>
<content type="string" default="" />
</parameter>
</parameters>
<actions>
<action name="start" timeout="10" />
<action name="stop" timeout="10" />
<action name="status" depth="0" timeout="10" interval="10" start-delay="10" />
<action name="monitor" depth="0" timeout="10" interval="10" start-delay="10" />
<action name="meta-data" timeout="5" />
<action name="validate-all" timeout="5" />
</actions>
</resource-agent>
END
}
MailProgram() {
mail -s "$1" "$email" <<EOF
$Subject
Command line was:
$ARGS
EOF
return $?
}
SubjectLine() {
case $1 in
??*) echo $1;;
*) echo "Resource Group";;
esac
}
MailToStart() {
Subject="`SubjectLine $subject` Takeover in progress at `date` on $us"
MailProgram "$Subject" $1
ha_pseudo_resource MailTo_${OCF_RESOURCE_INSTANCE} start
}
MailToStop () {
Subject="`SubjectLine $subject` Migrating resource away at `date` from $us"
MailProgram "$Subject" $1
ha_pseudo_resource MailTo_${OCF_RESOURCE_INSTANCE} stop
}
MailToStatus () {
- ocf_log warn "Don't stat/monitor me! MailTo is a pseudo resource agent, so the status reported may be incorrect"
+# ocf_log warn "Don't stat/monitor me! MailTo is a pseudo resource agent, so the status reported may be incorrect"
if ha_pseudo_resource MailTo_${OCF_RESOURCE_INSTANCE} monitor
then
echo "running"
return $OCF_SUCCESS
else
echo "stopped"
return $OCF_NOT_RUNNING
fi
}
MailToValidateAll () {
# $email may be a list of mail addresses separated by "," and " " and "\t"
# normalize it for ease of parse
local local_email=`echo $email | tr ",\t" " " | tr -s " "`
# ocf_log info "[$local_email]"
for item in "$local_email"
do
case $item in
*?@?*)
;; #possible valid email address
*)
getent passwd $item >/dev/null
if [ $? -eq 0 ]; then
: OK, mail to $item@localhost.localdomain
else
ocf_log err "Invalid email address [$email]"
exit $OCF_ERR_ARGS
fi
;;
esac
done
# Any subject is OK
return $OCF_SUCCESS
}
#
# See how we were called.
#
# The order in which heartbeat provides arguments to resource
# scripts is broken. It should be fixed.
#
if
( [ $# -ne 1 ] )
then
usage
exit $OCF_ERR_GENERIC
fi
case $1 in
meta-data) meta_data
exit $OCF_SUCCESS
;;
status|monitor) MailToStatus
exit $?
;;
usage) usage
exit $OCF_SUCCESS
;;
*) ;;
esac
if
[ -z "$OCF_RESKEY_email" ]
then
ocf_log err "At least 1 Email address has to be given!"
# usage
exit $OCF_ERR_GENERIC
fi
email=$OCF_RESKEY_email
subject=$OCF_RESKEY_subject
case $1 in
start) MailToStart
;;
stop) MailToStop
;;
validate-all) MailToValidateAll
;;
*) usage
exit $OCF_ERR_UNIMPLEMENTED
;;
esac
exit $?
diff --git a/heartbeat/apache b/heartbeat/apache
index 92b8ab518..beaa2c6a5 100644
--- a/heartbeat/apache
+++ b/heartbeat/apache
@@ -1,600 +1,612 @@
#!/bin/sh
#
# High-Availability Apache/IBMhttp control script
#
# apache (aka IBMhttpd)
#
# Description: starts/stops apache web servers.
#
# Author: Alan Robertson
# Sun Jiang Dong
#
# Support: linux-ha@lists.linux-ha.org
#
# License: GNU General Public License (GPL)
#
# Copyright: (C) 2002-2005 International Business Machines
#
#
# An example usage in /etc/ha.d/haresources:
# node1 10.0.0.170 apache::/opt/IBMHTTPServer/conf/httpd.conf
# node1 10.0.0.170 IBMhttpd
#
# Our parsing of the Apache config files is very rudimentary.
# It'll work with lots of different configurations - but not every
# possible configuration.
#
# Patches are being accepted ;-)
#
# OCF parameters:
# OCF_RESKEY_configfile
# OCF_RESKEY_httpd
# OCF_RESKEY_port
# OCF_RESKEY_statusurl
# OCF_RESKEY_options
# OCF_RESKEY_testregex
HA_VARRUNDIR=${HA_VARRUN}
. ${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs
#######################################################################
#
# Configuration options - usually you don't need to change these
#
#######################################################################
#
IBMHTTPD=/opt/IBMHTTPServer/bin/httpd
HTTPDLIST="/sbin/httpd2 /usr/sbin/httpd2 /usr/sbin/apache2 /sbin/httpd /usr/sbin/httpd /usr/sbin/apache $IBMHTTPD"
MPM=/usr/share/apache2/find_mpm
if
[ -x $MPM ]
then
HTTPDLIST="$HTTPDLIST `$MPM 2>/dev/null`"
fi
WGETOPTS="-O- -nv -L"
LOCALHOST="http://localhost"
HTTPDOPTS="-DSTATUS"
DEFAULT_IBMCONFIG=/opt/IBMHTTPServer/conf/httpd.conf
DEFAULT_NORMCONFIG="/etc/apache2/httpd.conf"
#
# You can also set
# HTTPD
# PORT
# STATUSURL
# CONFIGFILE
# in this section if what we're doing doesn't work for you...
#
# End of Configuration options
#######################################################################
CMD=`basename $0`
# The config-file-pathname is the pathname to the configuration
# file for this web server. Various appropriate defaults are
# assumed if no config file is specified. If this command is
# invoked as *IBM*, then the default config file name is
# $DEFAULT_IBMCONFIG, otherwise the default config file
# will be $DEFAULT_NORMCONFIG.
usage() {
cat <<-!
usage: $0 action
action:
start start the web server
stop stop the web server
status return the status of web server, run or down
monitor return TRUE if the web server appears to be working.
For this to be supported you must configure mod_status
and give it a server-status URL. You have to have
installed $WGET for this to work.
meta-data show meta data message
validate-all validate the instance parameters
!
exit $OCF_ERR_ARGS
}
apachecat() {
awk '
+ function procline() {
+ split($0,a);
+ if( a[1]=="Include" ) {
+ procinclude(a[2]);
+ } else {
+ if( a[1]=="ServerRoot" ) {
+ rootdir=a[2];
+ gsub("\"","",rootdir);
+ }
+ print;
+ }
+ }
function printfile(infile, a) {
while( (getline<infile) > 0 ) {
- split($0,a);
- if( a[1]=="Include" ) procinclude(a[2]);
- else print;
+ procline();
}
close(infile);
}
function allfiles(dir, cmd,f) {
cmd="find -L "dir" -type f";
while( ( cmd | getline f ) > 0 ) {
printfile(f);
}
close(cmd);
}
function listfiles(pattern, cmd,f) {
cmd="ls "pattern;
while( ( cmd | getline f ) > 0 ) {
printfile(f);
}
close(cmd);
}
function procinclude(spec) {
+ if( rootdir!="" && spec!~/^\// ) {
+ spec=rootdir"/"spec;
+ }
if( isdir(spec) ) {
allfiles(spec); # read all files in a directory (and subdirs)
} else {
listfiles(spec); # there could be jokers
}
}
function isdir(s) {
return !system("test -d \""s"\"");
}
- $1=="Include" { procinclude($2); next; }
- { print }
+ { procline(); }
' $1 |
sed 's/#.*//;s/[[:blank:]]*$//;s/^[[:blank:]]*//' |
grep -v '^$'
}
#
# set parameters (as shell vars) from our apache config file
#
get_apache_params() {
configfile=$1
shift 1
vars=`echo $@ | sed 's/ /,/g'`
eval `
apachecat $configfile | awk -v vars="$vars" '
BEGIN{
split(vars,v,",");
for( i in v )
vl[i]=tolower(v[i]);
}
{
for( i in v )
if( tolower($1)==vl[i] ) {
print v[i]"="$2
delete vl[i]
break
}
}
'`
}
#
# Return the location(s) that are handled by the given handler
#
FindLocationForHandler() {
PerlScript='while (<>) {
/<Location "?([^ >"]+)/i && ($loc=$1);
'"/SetHandler +$2"'/i && print "$loc\n";
}'
apachecat $1 | perl -e "$PerlScript"
}
#
# Check if the port is valid
#
CheckPort() {
ocf_is_decimal "$1" && [ $1 -gt 0 ]
}
#
# Get all the parameters we need from the Apache config file
#
GetParams() {
ConfigFile=$1
if [ ! -f $ConfigFile ]; then
return 1
fi
get_apache_params $ConfigFile ServerRoot PidFile Port Listen
case $PidFile in
/*) ;;
[[:alnum:]]*) PidFile=$ServerRoot/$PidFile;;
*) PidFile=$HA_VARRUNDIR/${httpd_basename}.pid;;
esac
if CheckPort "$PORT"; then
:
else
PORT=$Port
if CheckPort "$PORT"; then
:
else
# Final resort
PORT=80
fi
fi
#
# It's difficult to figure out whether the server supports
# the status operation.
# (we start our server with -DSTATUS - just in case :-))
#
# Typically (but not necessarily) the status URL is /server-status
#
# For us to think status will work, we have to have the following things:
#
# - $WGET has to exist and be executable
# - The server-status handler has to be mapped to some URL somewhere
#
# We assume that:
#
# - the "main" web server at $PORT will also support it if we can find it
# somewhere in the file
# - it will be supported at the same URL as the one we find in the file
#
# If this doesn't work for you, then set STATUSURL at the top of the file
#
if
[ "X$STATUSURL" = "X" ]
then
if
have_binary $WGET
then
StatusURL=`FindLocationForHandler $1 server-status | tail -1`
if
[ "x$Listen" != "x" ]
then
echo $Listen | grep ':' >/dev/null || # Listen can be only port spec
Listen="localhost:$Listen"
STATUSURL="http://${Listen}$StatusURL"
case $WGET in
*wget*) WGETOPTS="$WGETOPTS --bind-address=127.0.0.1";;
esac
else
STATUSURL="${LOCALHOST}:${PORT}$StatusURL"
fi
fi
fi
test "$PidFile"
}
#
# return TRUE if a process with given PID is running
#
ProcessRunning() {
ApachePID=$1
# Use /proc if it looks like it's here...
if
[ -d /proc -a -d /proc/1 ]
then
[ -d /proc/$ApachePID ]
else
# This assumes we're running as root...
kill -0 "$ApachePID" >/dev/null 2>&1
fi
}
silent_status() {
if
[ -f $PidFile ]
then
ProcessRunning `cat $PidFile`
else
: No pid file
false
fi
}
start_apache() {
if
silent_status
then
ocf_log info "$CMD already running (pid $ApachePID)"
return $OCF_SUCCESS
fi
ocf_run $HTTPD $HTTPDOPTS $OPTIONS -f $CONFIGFILE
tries=0
while : # wait until the user set timeout
do
monitor_apache
ec=$?
if [ $ec -eq $OCF_NOT_RUNNING ]
then
tries=`expr $tries + 1`
ocf_log info "waiting for apache $CONFIGFILE to come up"
sleep 1
else
break
fi
done
return $ec
}
stop_apache() {
if
silent_status
then
if
kill $ApachePID
then
tries=0
while
ProcessRunning $ApachePID &&
[ $tries -lt 10 ]
do
sleep 1
kill $ApachePID >/dev/null 2>&1
ocf_log info "Killing apache PID $ApachePID"
tries=`expr $tries + 1`
done
else
ocf_log warn "Killing apache PID $ApachePID FAILED."
fi
if
ProcessRunning $ApachePID
then
ocf_log info "$CMD still running ($ApachePID)."
false
else
ocf_log info "$CMD stopped."
fi
else
ocf_log info "$CMD is not running."
fi
}
status_apache() {
silent_status
rc=$?
if
[ $rc -eq 0 ]
then
ocf_log info "$CMD is running (pid $ApachePID)."
return $OCF_SUCCESS
else
ocf_log info "$CMD is stopped."
return $OCF_NOT_RUNNING
fi
}
monitor_apache() {
if
! have_binary $WGET
then
ocf_log err "Monitoring not supported by $OCF_RESOURCE_INSTANCE"
ocf_log info "Please make sure that wget is available"
return $OCF_ERR_CONFIGURED
elif [ -z "$STATUSURL" ]; then
ocf_log err "Monitoring not supported by $CONFIGFILE"
ocf_log info "Please set the statusurl parameter"
return $OCF_ERR_CONFIGURED
fi
if
silent_status
then
ocf_run sh -c "$WGET $WGETOPTS $STATUSURL | grep -Ei \"$TESTREGEX\" >/dev/null"
else
ocf_log info "$CMD not running"
return $OCF_NOT_RUNNING
fi
}
metadata_apache(){
cat <<END
<?xml version="1.0"?>
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="apache">
<version>1.0</version>
<longdesc lang="en">
This is the resource agent for the
Apache web server.
Thie resource agent operates both version 1.x and version 2.x Apache
servers.
See also http://httpd.apache.org/
</longdesc>
<shortdesc lang="en">Apache web server</shortdesc>
<parameters>
<parameter name="configfile" required="1" unique="1">
<longdesc lang="en">
The full pathname of the Apache configuration file.
This file is parsed to provide defaults for various other
resource agent parameters.
</longdesc>
<shortdesc lang="en">configuration file path</shortdesc>
<content type="string" default="/etc/apache2/httpd.conf" />
</parameter>
<parameter name="httpd">
<longdesc lang="en">
The full pathname of the httpd binary (optional).
</longdesc>
<shortdesc lang="en">httpd binary path</shortdesc>
<content type="string" default="/usr/sbin/httpd" />
</parameter>
<parameter name="port" >
<longdesc lang="en">
A port number that we can probe for status information
using the statusurl.
This will default to the port number found in the
configuration file, or 80, if none can be found
in the configuration file.
</longdesc>
<shortdesc lang="en">httpd port</shortdesc>
<content type="integer" />
</parameter>
<parameter name="statusurl">
<longdesc lang="en">
The URL of the apache status module.
If left unspecified, it will be inferred
from the apache configuration file.
</longdesc>
<shortdesc lang="en">url name</shortdesc>
<content type="string" />
</parameter>
<parameter name="options">
<longdesc lang="en">
Extra options to apply when starting apache. See man httpd(8).
</longdesc>
<shortdesc lang="en">command line options</shortdesc>
<content type="string" />
</parameter>
<parameter name="testregex">
<longdesc lang="en">
Regular expression to match in the output of statusurl. It
is case insensitive.
</longdesc>
<shortdesc lang="en">test regular expression</shortdesc>
<content type="string" />
</parameter>
</parameters>
<actions>
<action name="start" timeout="90" />
<action name="stop" timeout="100" />
<action name="status" timeout="30" />
<action name="monitor" depth="0" timeout="20" interval="10" start-delay="1m" />
<action name="meta-data" timeout="5" />
<action name="validate-all" timeout="5" />
</actions>
</resource-agent>
END
exit $OCF_SUCCESS
}
validate_all_apache() {
if CheckPort $PORT; then
# We are sure to succeed here, since we forced $PORT to be valid in GetParams()
: OK
else
ocf_log err "Port number $PORT is invalid!"
exit $OCF_ERR_ARGS
fi
if [ -z $STATUSURL ]; then
: OK to be empty
else
case $STATUSURL in
http://*/*) ;;
*)
ocf_log err "Invalid STATUSURL $STATUSURL"
exit $OCF_ERR_ARGS ;;
esac
fi
if [ ! -x $HTTPD ]; then
ocf_log err "HTTPD $HTTPD not found or is not an executable!"
exit $OCF_ERR_ARGS
fi
if [ ! -f $CONFIGFILE ]; then
# We are sure to succeed here, since we have parsed $CONFIGFILE before getting here
ocf_log err "Configuration file $CONFIGFILE not found!"
exit $OCF_ERR_CONFIGURED
fi
return $OCF_SUCCESS
}
if
[ $# -eq 1 ]
then
COMMAND=$1
HTTPD="$OCF_RESKEY_httpd"
PORT="$OCF_RESKEY_port"
STATUSURL="$OCF_RESKEY_statusurl"
CONFIGFILE="$OCF_RESKEY_configfile"
OPTIONS="$OCF_RESKEY_options"
TESTREGEX=${OCF_RESKEY_testregex:-'</ *body *>[[:space:]]*</ *html *>'}
else
usage
fi
LSB_STATUS_STOPPED=3
if
[ "X$HTTPD" = X -o ! -f "$HTTPD" -o ! -x "$HTTPD" ]
then
case $0 in
*IBM*) HTTPD=$IBMHTTPD
DefaultConfig=$DEFAULT_IBMCONFIG;;
*)
HTTPD=
for h in $HTTPDLIST
do
if
[ -f $h -a -x $h ]
then
HTTPD=$h
break
fi
done
# It is possible that we still do not have a valid httpd at this stage
if
[ -z "$HTTPD" ]
then
case $COMMAND in
stop) exit $OCF_SUCCESS;;
monitor) exit $OCF_NOT_RUNNING;;
status) exit $LSB_STATUS_STOPPED;;
meta-data) metadata_apache;;
esac
ocf_log err "No valid httpd found! Please revise your <HTTPDLIST> item"
exit $OCF_ERR_CONFIGURED
fi
# Let the user know that the $HTTPD used is not the one (s)he specified via $OCF_RESKEY_httpd
if
[ "X$OCF_RESKEY_httpd" != X ]
then
ocf_log info "Using $HTTPD as HTTPD"
fi
DefaultConfig=$DEFAULT_NORMCONFIG;;
esac
fi
httpd_basename=`basename $HTTPD`
case $httpd_basename in
*-*) httpd_basename=`echo "$httpd_basename" | sed -e 's%\-.*%%'`;;
esac
case "$CONFIGFILE" in
"") CONFIGFILE=$DefaultConfig;;
*) ;;
esac
if
[ ! -f "$CONFIGFILE" ]
then
case $COMMAND in
stop) ocf_log warn "$CONFIGFILE not found - apache considered stopped"
exit $OCF_SUCCESS;;
monitor) exit $OCF_NOT_RUNNING;;
status) exit $LSB_STATUS_STOPPED;;
esac
fi
if
[ "X$COMMAND" = Xmeta-data ] || GetParams $CONFIGFILE
then
: OK
else
ocf_log err "Cannot parse config file [$CONFIGFILE]"
exit $OCF_ERR_CONFIGURED
fi
case $COMMAND in
start) start_apache;;
stop) stop_apache;;
status) status_apache;;
monitor) monitor_apache;;
meta-data) metadata_apache;;
validate-all) validate_all_apache;;
*) usage;;
esac
diff --git a/heartbeat/ocf-shellfuncs.in b/heartbeat/ocf-shellfuncs.in
index 9401ef104..81282bab8 100644
--- a/heartbeat/ocf-shellfuncs.in
+++ b/heartbeat/ocf-shellfuncs.in
@@ -1,16 +1,16 @@
#
# Warn about, but continue with, deprecated locations.
#
# Copyright (c) 2007 David Lee <t.d.lee@durham.ac.uk>
#
# GPL version 2 or later.
#
. @OCF_RA_DIR@/heartbeat/.ocf-shellfuncs
-ha_log "WARN: Use of @HA_NOARCHLIBHBDIR@/ocf-shellfuncs is deprecated."
+ha_log "WARN: Use of @HA_LIBHBDIR@/ocf-shellfuncs is deprecated."
ha_log "WARN: Please use @OCF_RA_DIR@/heartbeat/.ocf-shellfuncs instead."
ha_log 'WARN: Note that the $OCF_ROOT environment variable points to '"$OCF_ROOT"
ha_log 'WARN: We recommend using the $OCF_ROOT environment variable'
ha_log "WARN: Please fix $0 at your earliest convenience"

File Metadata

Mime Type
text/x-diff
Expires
Mon, Apr 21, 8:10 PM (4 h, 30 s)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1665691
Default Alt Text
(135 KB)

Event Timeline