mainconfig.c
No OneTemporary
Actions

Size

18 KB

Referenced Files

None

Subscribers

None

mainconfig.c
View Options

	/*
	* Copyright (c) 2002-2005 MontaVista Software, Inc.
	* Copyright (c) 2006-2009 Red Hat, Inc.
	*
	* All rights reserved.
	*
	* Author: Steven Dake (sdake@redhat.com)
	*
	* This software licensed under BSD license, the text of which follows:
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* - Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	* - Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	* - Neither the name of the MontaVista Software, Inc. nor the names of its
	* contributors may be used to endorse or promote products derived from this
	* software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
	* THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <config.h>

	#include <stdio.h>
	#include <string.h>
	#include <stdlib.h>
	#include <errno.h>
	#include <assert.h>
	#include <sys/socket.h>
	#include <netinet/in.h>
	#include <arpa/inet.h>
	#include <pwd.h>
	#include <grp.h>
	#include <limits.h>

	#include <corosync/corotypes.h>
	#include <corosync/list.h>
	#include <corosync/totem/totem.h>
	#include <corosync/engine/logsys.h>

	#include "util.h"
	#include "mainconfig.h"

	static char error_string_response[512];
	static struct objdb_iface_ver0 *global_objdb;

	/* This just makes the code below a little neater */
	static inline int objdb_get_string (
	const struct objdb_iface_ver0 *objdb,
	hdb_handle_t object_service_handle,
	const char key, char *value)
	{
	int res;

	*value = NULL;
	if ( !(res = objdb->object_key_get (object_service_handle,
	key,
	strlen (key),
	(void *)value,
	NULL))) {

	if (*value) {
	return 0;
	}
	}
	return -1;
	}

	static inline void objdb_get_int (
	const struct objdb_iface_ver0 *objdb,
	hdb_handle_t object_service_handle,
	char key, unsigned int intvalue)
	{
	char *value = NULL;

	if (!objdb->object_key_get (object_service_handle,
	key,
	strlen (key),
	(void *)&value,
	NULL)) {

	if (value) {
	*intvalue = atoi(value);
	}
	}
	}

	/**
	* insert_into_buffer
	* @target_buffer: a buffer where to write results
	* @bufferlen: tell us the size of the buffer to avoid overflows
	* @entry: entry that needs to be added to the buffer
	* @after: can either be NULL or set to a string.
	* if NULL, @entry is prependend to logsys_format_get buffer.
	* if set, @entry is added immediately after @after.
	*
	* Since the function is specific to logsys_format_get handling, it is implicit
	* that source is logsys_format_get();
	*
	* In case of failure, target_buffer could be left dirty. So don't trust
	* any data leftover in it.
	*
	* Searching for "after" assumes that there is only entry of "after"
	* in the source. Afterall we control the string here and for logging format
	* it makes little to no sense to have duplicate format entries.
	*
	* Returns: 0 on success, -1 on failure
	**/
	static int insert_into_buffer(
	char *target_buffer,
	size_t bufferlen,
	const char *entry,
	const char *after)
	{
	const char *current_format = NULL;

	current_format = logsys_format_get();

	/* if the entry is already in the format we don't add it again */
	if (strstr(current_format, entry) != NULL) {
	return -1;
	}

	/* if there is no "after", simply prepend the requested entry
	* otherwise go for beautiful string manipulation.... </sarcasm> */
	if (!after) {
	if (snprintf(target_buffer, bufferlen - 1, "%s%s",
	entry,
	current_format) >= bufferlen - 1) {
	return -1;
	}
	} else {
	const char *afterpos;
	size_t afterlen;
	size_t templen;

	/* check if after is contained in the format
	* and afterlen has a meaning or return an error */
	afterpos = strstr(current_format, after);
	afterlen = strlen(after);
	if ((!afterpos) \|\| (!afterlen)) {
	return -1;
	}

	templen = afterpos - current_format + afterlen;
	if (snprintf(target_buffer, templen + 1, "%s", current_format)
	>= bufferlen - 1) {
	return -1;
	}
	if (snprintf(target_buffer + templen, bufferlen - ( templen + 1 ),
	"%s%s", entry, current_format + templen)
	>= bufferlen - ( templen + 1 )) {
	return -1;
	}
	}
	return 0;
	}

	/*
	* format set is the only global specific option that
	* doesn't apply at system/subsystem level.
	*/
	static int corosync_main_config_format_set (
	struct objdb_iface_ver0 *objdb,
	hdb_handle_t object_handle,
	const char **error_string)
	{
	const char *error_reason;
	char new_format_buffer[PATH_MAX];
	char *value;
	int err = 0;

	if (!objdb_get_string (objdb,object_handle, "fileline", &value)) {
	if (strcmp (value, "on") == 0) {
	if (!insert_into_buffer(new_format_buffer,
	sizeof(new_format_buffer),
	" %f:%l", "s]")) {
	err = logsys_format_set(new_format_buffer);
	} else
	if (!insert_into_buffer(new_format_buffer,
	sizeof(new_format_buffer),
	"%f:%l", NULL)) {
	err = logsys_format_set(new_format_buffer);
	}
	} else
	if (strcmp (value, "off") == 0) {
	/* nothing to do here */
	} else {
	error_reason = "unknown value for fileline";
	goto parse_error;
	}
	}
	if (!objdb_get_string (objdb,object_handle, "function_name", &value)) {
	if (strcmp (value, "on") == 0) {
	if (!insert_into_buffer(new_format_buffer,
	sizeof(new_format_buffer),
	"%n:", "f:")) {
	err = logsys_format_set(new_format_buffer);
	} else
	if (!insert_into_buffer(new_format_buffer,
	sizeof(new_format_buffer),
	" %n", "s]")) {
	err = logsys_format_set(new_format_buffer);
	}
	} else
	if (strcmp (value, "off") == 0) {
	/* nothing to do here */
	} else {
	error_reason = "unknown value for function_name";
	goto parse_error;
	}
	}
	if (!objdb_get_string (objdb,object_handle, "timestamp", &value)) {
	if (strcmp (value, "on") == 0) {
	if(!insert_into_buffer(new_format_buffer,
	sizeof(new_format_buffer),
	"%t ", NULL)) {
	err = logsys_format_set(new_format_buffer);
	}
	} else
	if (strcmp (value, "off") == 0) {
	/* nothing to do here */
	} else {
	error_reason = "unknown value for timestamp";
	goto parse_error;
	}
	}
	if (err) {
	error_reason = "exhausted virtual memory";
	goto parse_error;
	}

	return (0);

	parse_error:
	*error_string = error_reason;

	return (-1);
	}

	static int corosync_main_config_set (
	struct objdb_iface_ver0 *objdb,
	hdb_handle_t object_handle,
	const char *subsys,
	const char **error_string)
	{
	const char *error_reason = error_string_response;
	char *value;
	unsigned int mode;

	/*
	* this bit abuses the internal logsys exported API
	* to guarantee that all configured subsystems are
	* initialized too.
	*
	* using this approach avoids some headaches caused
	* by IPC and TOTEM that have a special logging
	* handling requirements
	*/
	if (subsys != NULL) {
	if (_logsys_subsys_create(subsys) < 0) {
	error_reason = "unable to create new logging subsystem";
	goto parse_error;
	}
	}

	mode = logsys_config_mode_get(subsys);
	if (mode < 0) {
	error_reason = "unable to get mode";
	goto parse_error;
	}

	if (!objdb_get_string (objdb,object_handle, "to_file", &value)) {

	log_printf(LOGSYS_LEVEL_WARNING,
	"Warning: the to_file config paramater has been obsoleted."
	" See corosync.conf man page to_logfile directive.");

	if (strcmp (value, "yes") == 0) {
	mode \|= LOGSYS_MODE_OUTPUT_FILE;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to set mode to_file";
	goto parse_error;
	}
	} else
	if (strcmp (value, "no") == 0) {
	mode &= ~LOGSYS_MODE_OUTPUT_FILE;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to unset mode to_file";
	goto parse_error;
	}
	} else {
	error_reason = "unknown value for to_file";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "to_logfile", &value)) {
	if (strcmp (value, "yes") == 0) {
	mode \|= LOGSYS_MODE_OUTPUT_FILE;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to set mode to_logfile";
	goto parse_error;
	}
	} else
	if (strcmp (value, "no") == 0) {
	mode &= ~LOGSYS_MODE_OUTPUT_FILE;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to unset mode to_logfile";
	goto parse_error;
	}
	} else {
	error_reason = "unknown value for to_logfile";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "to_syslog", &value)) {
	if (strcmp (value, "yes") == 0) {
	mode \|= LOGSYS_MODE_OUTPUT_SYSLOG;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to set mode to_syslog";
	goto parse_error;
	}
	} else
	if (strcmp (value, "no") == 0) {
	mode &= ~LOGSYS_MODE_OUTPUT_SYSLOG;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to unset mode to_syslog";
	goto parse_error;
	}
	} else {
	error_reason = "unknown value for to_syslog";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "to_stderr", &value)) {
	if (strcmp (value, "yes") == 0) {
	mode \|= LOGSYS_MODE_OUTPUT_STDERR;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to set mode to_stderr";
	goto parse_error;
	}
	} else
	if (strcmp (value, "no") == 0) {
	mode &= ~LOGSYS_MODE_OUTPUT_STDERR;
	if (logsys_config_mode_set(subsys, mode) < 0) {
	error_reason = "unable to unset mode to_stderr";
	goto parse_error;
	}
	} else {
	error_reason = "unknown value for to_syslog";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "syslog_facility", &value)) {
	int syslog_facility;

	syslog_facility = logsys_facility_id_get(value);
	if (syslog_facility < 0) {
	error_reason = "unknown syslog facility specified";
	goto parse_error;
	}
	if (logsys_config_syslog_facility_set(subsys,
	syslog_facility) < 0) {
	error_reason = "unable to set syslog facility";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "syslog_level", &value)) {
	int syslog_priority;

	log_printf(LOGSYS_LEVEL_WARNING,
	"Warning: the syslog_level config paramater has been obsoleted."
	" See corosync.conf man page syslog_priority directive.");

	syslog_priority = logsys_priority_id_get(value);
	if (syslog_priority < 0) {
	error_reason = "unknown syslog level specified";
	goto parse_error;
	}
	if (logsys_config_syslog_priority_set(subsys,
	syslog_priority) < 0) {
	error_reason = "unable to set syslog level";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "syslog_priority", &value)) {
	int syslog_priority;

	syslog_priority = logsys_priority_id_get(value);
	if (syslog_priority < 0) {
	error_reason = "unknown syslog priority specified";
	goto parse_error;
	}
	if (logsys_config_syslog_priority_set(subsys,
	syslog_priority) < 0) {
	error_reason = "unable to set syslog priority";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "logfile", &value)) {
	if (logsys_config_file_set (subsys, error_string, value) < 0) {
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb,object_handle, "logfile_priority", &value)) {
	int logfile_priority;

	logfile_priority = logsys_priority_id_get(value);
	if (logfile_priority < 0) {
	error_reason = "unknown logfile priority specified";
	goto parse_error;
	}
	if (logsys_config_logfile_priority_set(subsys,
	logfile_priority) < 0) {
	error_reason = "unable to set logfile priority";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb, object_handle, "debug", &value)) {
	if (strcmp (value, "on") == 0) {
	if (logsys_config_debug_set (subsys, 1) < 0) {
	error_reason = "unable to set debug on";
	goto parse_error;
	}
	} else
	if (strcmp (value, "off") == 0) {
	if (logsys_config_debug_set (subsys, 0) < 0) {
	error_reason = "unable to set debug off";
	goto parse_error;
	}
	} else {
	error_reason = "unknown value for debug";
	goto parse_error;
	}
	}

	if (!objdb_get_string (objdb, object_handle, "tags", &value)) {
	char temp, token;
	unsigned int tags = 0;

	temp = strdup(value);
	if (temp == NULL) {
	error_reason = "exhausted virtual memory";
	goto parse_error;
	}

	while ((token = strsep(&temp, "\|")) != NULL) {
	int val;

	val = logsys_tag_id_get(token);
	if (val < 0) {
	error_reason = "bad tags value";
	goto parse_error;
	}
	tags \|= val;
	}
	free(temp);

	tags \|= LOGSYS_TAG_LOG;

	if (logsys_config_tags_set (subsys, tags) < 0) {
	error_reason = "unable to set tags";
	goto parse_error;
	}
	}

	return (0);

	parse_error:
	*error_string = error_reason;

	return (-1);
	}

	static int corosync_main_config_read_logging (
	struct objdb_iface_ver0 *objdb,
	const char **error_string)
	{
	hdb_handle_t object_service_handle;
	hdb_handle_t object_logger_subsys_handle;
	hdb_handle_t object_find_handle;
	hdb_handle_t object_find_logsys_handle;
	const char *error_reason;
	char *value;

	objdb->object_find_create (
	OBJECT_PARENT_HANDLE,
	"logging",
	strlen ("logging"),
	&object_find_handle);

	if (objdb->object_find_next (
	object_find_handle,
	&object_service_handle) == 0) {

	/* format set is supported only for toplevel */
	if (corosync_main_config_format_set (objdb,
	object_service_handle,
	&error_reason) < 0) {
	goto parse_error;
	}

	if (corosync_main_config_set (objdb,
	object_service_handle,
	NULL,
	&error_reason) < 0) {
	goto parse_error;
	}

	/* we will need 2 of these to compensate for new logging
	* config format */

	objdb->object_find_create (
	object_service_handle,
	"logger_subsys",
	strlen ("logger_subsys"),
	&object_find_logsys_handle);

	while (objdb->object_find_next (
	object_find_logsys_handle,
	&object_logger_subsys_handle) == 0) {

	if (!objdb_get_string (objdb,
	object_logger_subsys_handle,
	"subsys", &value)) {

	if (corosync_main_config_set (objdb,
	object_logger_subsys_handle,
	value,
	&error_reason) < 0) {
	goto parse_error;
	}
	}
	else {
	error_reason = "subsys required for logger directive";
	goto parse_error;
	}
	}
	objdb->object_find_destroy (object_find_logsys_handle);

	objdb->object_find_create (
	object_service_handle,
	"logging_daemon",
	strlen ("logging_daemon"),
	&object_find_logsys_handle);

	while (objdb->object_find_next (
	object_find_logsys_handle,
	&object_logger_subsys_handle) == 0) {

	if (!objdb_get_string (objdb,
	object_logger_subsys_handle,
	"name", &value)) {

	if ((strcmp(value, "corosync") == 0) &&
	(!objdb_get_string (objdb,
	object_logger_subsys_handle,
	"subsys", &value))) {

	if (corosync_main_config_set (objdb,
	object_logger_subsys_handle,
	value,
	&error_reason) < 0) {
	goto parse_error;
	}
	}
	else {
	error_reason = "subsys required for logging_daemon directive";
	goto parse_error;
	}
	}
	else {
	error_reason = "name required for logging_daemon directive";
	goto parse_error;
	}
	}
	objdb->object_find_destroy (object_find_logsys_handle);
	}
	objdb->object_find_destroy (object_find_handle);

	return 0;

	parse_error:
	*error_string = error_reason;

	return (-1);
	}

	static int uid_determine (const char *req_user)
	{
	struct passwd *passwd;
	int ais_uid = 0;

	passwd = getpwnam(req_user);
	if (passwd == 0) {
	log_printf (LOGSYS_LEVEL_ERROR, "ERROR: The '%s' user is not found in /etc/passwd, please read the documentation.\n", req_user);
	corosync_exit_error (AIS_DONE_UID_DETERMINE);
	}
	ais_uid = passwd->pw_uid;
	endpwent ();
	return ais_uid;
	}

	static int gid_determine (const char *req_group)
	{
	struct group *group;
	int ais_gid = 0;

	group = getgrnam (req_group);
	if (group == 0) {
	log_printf (LOGSYS_LEVEL_ERROR, "ERROR: The '%s' group is not found in /etc/group, please read the documentation.\n", req_group);
	corosync_exit_error (AIS_DONE_GID_DETERMINE);
	}
	ais_gid = group->gr_gid;
	endgrent ();
	return ais_gid;
	}

	static void main_objdb_reload_notify(objdb_reload_notify_type_t type, int flush,
	void *priv_data_pt)
	{
	const char *error_string;

	if (type == OBJDB_RELOAD_NOTIFY_END) {

	/*
	* Reload the logsys configuration
	*/
	logsys_format_set(NULL);
	corosync_main_config_read_logging(global_objdb,
	&error_string);
	}
	}

	static void add_logsys_config_notification(
	struct objdb_iface_ver0 *objdb)
	{

	global_objdb = objdb;

	objdb->object_track_start(OBJECT_PARENT_HANDLE,
	1,
	NULL,
	NULL,
	NULL,
	main_objdb_reload_notify,
	NULL);

	}

	int corosync_main_config_read (
	struct objdb_iface_ver0 *objdb,
	const char **error_string,
	struct ug_config *ug_config)
	{
	hdb_handle_t object_service_handle;
	char *value;
	const char *error_reason = error_string_response;
	hdb_handle_t object_find_handle;

	memset (ug_config, 0, sizeof (struct ug_config));

	if (corosync_main_config_read_logging(objdb, error_string) < 0) {
	error_reason = *error_string;
	goto parse_error;
	}

	ug_config->uid = -1;
	ug_config->gid = -1;

	objdb->object_find_create (
	OBJECT_PARENT_HANDLE,
	"aisexec",
	strlen ("aisexec"),
	&object_find_handle);

	if (objdb->object_find_next (
	object_find_handle,
	&object_service_handle) == 0) {

	if (!objdb_get_string (objdb,object_service_handle, "user", &value)) {
	ug_config->uid = uid_determine(value);
	}

	if (!objdb_get_string (objdb,object_service_handle, "group", &value)) {
	ug_config->gid = gid_determine(value);
	}
	}

	objdb->object_find_destroy (object_find_handle);

	if (ug_config->uid < 0) {
	ug_config->uid = uid_determine("ais");
	}
	if (ug_config->gid < 0) {
	ug_config->gid = gid_determine("ais");
	}

	add_logsys_config_notification(objdb);

	return 0;

	parse_error:
	snprintf (error_string_response, sizeof(error_string_response),
	"parse error in config: %s.\n",
	error_reason);

	*error_string = error_string_response;
	return (-1);
	}

File Metadata

Mime Type: text/x-c
Expires: Wed, Feb 26, 12:51 AM (1 d, 6 h)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 1465061
Default Alt Text: mainconfig.c (18 KB)

mainconfig.cNo OneTemporaryActions

mainconfig.cView Options

File Metadata

Event Timeline

mainconfig.c
No OneTemporary
Actions

mainconfig.c
View Options