No OneTemporary
Actions

Size

59 KB

Referenced Files

None

Subscribers

None

View Options

	diff --git a/po/zh_CN.po b/po/zh_CN.po
	index 61688ac269..6a291b2c02 100644
	--- a/po/zh_CN.po
	+++ b/po/zh_CN.po
	@@ -1,1221 +1,1221 @@
	#
	# Copyright 2003-2024 the Pacemaker project contributors
	#
	# The version control history for this file may have further details.
	#
	# This source code is licensed under the GNU Lesser General Public License
	# version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY.
	#
	#, fuzzy
	msgid ""
	msgstr ""
	"Project-Id-Version: Pacemaker 2\n"
	"Report-Msgid-Bugs-To: developers@clusterlabs.org\n"
	-"POT-Creation-Date: 2024-02-27 10:08+0800\n"
	+"POT-Creation-Date: 2024-03-27 16:47+0800\n"
	"PO-Revision-Date: 2021-11-08 11:04+0800\n"
	"Last-Translator: Vivi <developers@clusterlabs.org>\n"
	"Language-Team: CHINESE <wangluwei@uniontech.org>\n"
	"Language: zh_CN\n"
	"MIME-Version: 1.0\n"
	"Content-Type: text/plain; charset=UTF-8\n"
	"Content-Transfer-Encoding: 8bit\n"

	#: daemons/fenced/pacemaker-fenced.c:500
	#, fuzzy
	-msgid ""
	-"* Advanced Use Only * An alternate parameter to supply instead of 'port'"
	-msgstr "* Advanced Use Only(仅限高级用户使用) * 用于替代 'port' 的其它参数"
	+msgid "An alternate parameter to supply instead of 'port'"
	+msgstr "用于替代 'port' 的其它参数"

	-#: daemons/fenced/pacemaker-fenced.c:502
	+#: daemons/fenced/pacemaker-fenced.c:501
	#, fuzzy
	msgid ""
	"Some devices do not support the standard 'port' parameter or may provide "
	"additional ones. Use this to specify an alternate, device-specific, "
	"parameter that should indicate the machine to be fenced. A value of \"none\" "
	"can be used to tell the cluster not to supply any additional parameters."
	msgstr ""
	"一些设备不支持标准的 'port' 参数, 或者可能会提供其它的参数. 使用此选项可指定"
	"一个替代的, 该设备专用的参数, 该参数应该指出需要 fence 的机器. 可以使用 "
	"\"none\" 值用于告诉集群不要提供任何其它的参数. "

	-#: daemons/fenced/pacemaker-fenced.c:512
	+#: daemons/fenced/pacemaker-fenced.c:511
	#, fuzzy
	msgid ""
	"A mapping of node names to port numbers for devices that do not support node "
	"names."
	msgstr "为不支持主机名的设备提供主机名到端口号的映射. "

	-#: daemons/fenced/pacemaker-fenced.c:514
	+#: daemons/fenced/pacemaker-fenced.c:513
	#, fuzzy
	msgid ""
	"For example, \"node1:1;node2:2,3\" would tell the cluster to use port 1 for "
	"node1 and ports 2 and 3 for node2."
	msgstr ""
	"例如, \"node1:1;node2:2,3\" 将会告诉集群对node1使用端口1, 对node2使用端口2和"
	"3."

	+#: daemons/fenced/pacemaker-fenced.c:520
	+msgid "Nodes targeted by this device"
	+msgstr "此设备针对的节点"
	+
	#: daemons/fenced/pacemaker-fenced.c:521
	#, fuzzy
	msgid ""
	-"A list of nodes that can be targeted by this device (optional unless "
	-"pcmk_host_list=\"static-list\")"
	-msgstr "此设备可以针对的节点列表 (可选, 除非 pcmk_host_list=\"static-list\")"
	-
	-#: daemons/fenced/pacemaker-fenced.c:523
	-#, fuzzy
	-msgid "For example, \"node1,node2,node3\"."
	-msgstr "例如, \"node1,node2,node3\"."
	+"Comma-separated list of nodes that can be targeted by this device (for "
	+"example, \"node1,node2,node3\"). If pcmk_host_check is \"static-list\", "
	+"either this or pcmk_host_map must be set."
	+msgstr "此设备可以针对的节点列表，节点之间用逗号分隔（例如，node1,node2, node3）.如果pcmk_host_list=\"static-list\")"

	#: daemons/fenced/pacemaker-fenced.c:530
	#, fuzzy
	msgid "How to determine which nodes can be targeted by the device"
	msgstr "如何确定设备可以针对哪些节点"

	#: daemons/fenced/pacemaker-fenced.c:531
	#, fuzzy
	msgid ""
	"Use \"dynamic-list\" to query the device via the 'list' command; \"static-"
	"list\" to check the pcmk_host_list attribute; \"status\" to query the device "
	"via the 'status' command; or \"none\" to assume every device can fence every "
	-"node."
	+"node. The default value is \"static-list\" if pcmk_host_map or "
	+"pcmk_host_list is set; otherwise \"dynamic-list\" if the device supports the "
	+"list operation; otherwise \"status\" if the device supports the status "
	+"operation; otherwise \"none\""
	msgstr ""
	"选项值 \"dynamic-list\" 表示通过 'list' 命令查询设备; 选项值 \"static-list"
	"\"表示检查 pcmk_host_list 属性; 选项值 \"status\" 表示通过 'status' 命令查询"
	-"设备; 或使用选项值 \"none\" 假设每个设备都可以 fence 所有节点. "
	+"设备; 或使用选项值 \"none\" 假设每个设备都可以 fence 所有节点. 如果\"pcmk_host_map\"或\"pcmk_host_list\"被设置，默认值为\"static-list\"；否则，如果设备支持列表操作，则为\"dynamic-list\"；如果设备支持状态操作，则为\"status\"；否则为\"none\""

	-#: daemons/fenced/pacemaker-fenced.c:540
	+#: daemons/fenced/pacemaker-fenced.c:544
	msgid ""
	"Enable a delay of no more than the time specified before executing fencing "
	"actions."
	msgstr "在执行 fence 操作前启用不超过指定时间的延迟"

	-#: daemons/fenced/pacemaker-fenced.c:542
	+#: daemons/fenced/pacemaker-fenced.c:546
	msgid ""
	"Enable a delay of no more than the time specified before executing fencing "
	"actions. Pacemaker derives the overall delay by taking the value of "
	"pcmk_delay_base and adding a random delay value such that the sum is kept "
	"below this maximum."
	msgstr ""
	"在执行 fence 操作前启用不超过指定时间的延迟. Pacemaker通过获取 "
	"pcmk_delay_base 的值并添加随机延迟值来得出总延迟, 并且确保总和不超过此最大值."

	-#: daemons/fenced/pacemaker-fenced.c:551
	+#: daemons/fenced/pacemaker-fenced.c:555
	msgid "Enable a base delay for fencing actions and specify base delay value."
	msgstr "为 fence 操作启用一个指定的基础延迟. "

	-#: daemons/fenced/pacemaker-fenced.c:553
	+#: daemons/fenced/pacemaker-fenced.c:557
	#, fuzzy
	msgid ""
	"This enables a static delay for fencing actions, which can help avoid "
	"\"death matches\" where two nodes try to fence each other at the same time. "
	"If pcmk_delay_max is also used, a random delay will be added such that the "
	"total delay is kept below that value. This can be set to a single time value "
	"to apply to any node targeted by this device (useful if a separate device is "
	"configured for each target), or to a node map (for example, \"node1:1s;"
	"node2:5\") to set a different value for each target."
	msgstr ""
	"这为 fence 操作启用一个静态延迟, 这有助于避免 \"death matches\" 即两个节点同"
	"时尝试互相 fence. 如果还同时使用了pcmk_delay_max, 则会添加一个随机延迟, 并确"
	"保总延迟保持在该值以下. 可以将其设置为单个时间值, 以应用于该设备的所有目标节"
	"点 (如果为每个目标节点都配置了单独的设备的情况下, 这很有用) 或设置成一个节点"
	"映射形式 (例如，\"node1:1s;node2:5\") 从而为每个目标节点设置不同值. "

	-#: daemons/fenced/pacemaker-fenced.c:566
	+#: daemons/fenced/pacemaker-fenced.c:570
	msgid ""
	"The maximum number of actions can be performed in parallel on this device"
	msgstr "可以在该设备上并发执行的最多操作数量"

	-#: daemons/fenced/pacemaker-fenced.c:568
	+#: daemons/fenced/pacemaker-fenced.c:572
	#, fuzzy
	msgid ""
	"Cluster property concurrent-fencing=\"true\" needs to be configured first. "
	"Then use this to specify the maximum number of actions can be performed in "
	"parallel on this device. A value of -1 means an unlimited number of actions "
	"can be performed in parallel."
	msgstr ""
	"需要先配置集群属性 concurrent-fencing=\"true\". 然后使用此参数指定可以在该设"
	"备上并发执行的最多操作数量. -1 表示可以并行执行无限数量的操作. "

	-#: daemons/fenced/pacemaker-fenced.c:578
	+#: daemons/fenced/pacemaker-fenced.c:582
	#, fuzzy
	-msgid ""
	-"* Advanced Use Only * An alternate command to run instead of 'reboot'"
	-msgstr "仅高级使用：运行替代命令，而不是'reboot'"
	+msgid "An alternate command to run instead of 'reboot'"
	+msgstr "运行替代命令，而不是'reboot'"

	-#: daemons/fenced/pacemaker-fenced.c:580
	+#: daemons/fenced/pacemaker-fenced.c:583
	#, fuzzy
	msgid ""
	"Some devices do not support the standard commands or may provide additional "
	"ones. Use this to specify an alternate, device-specific, command that "
	"implements the 'reboot' action."
	msgstr ""
	"一些设备不支持标准命令或可能提供其他命令，使用此选项可以指定一个该设备特定的"
	"替代命令，用来实现'reboot'操作。"

	-#: daemons/fenced/pacemaker-fenced.c:588
	+#: daemons/fenced/pacemaker-fenced.c:591
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * Specify an alternate timeout to use for 'reboot' "
	-"actions instead of stonith-timeout"
	-msgstr "仅高级使用：指定用于'reboot' 操作的替代超时，而不是stonith-timeout"
	+"Specify an alternate timeout to use for 'reboot' actions instead of stonith-"
	+"timeout"
	+msgstr "指定用于'reboot' 操作的替代超时，而不是stonith-timeout"

	-#: daemons/fenced/pacemaker-fenced.c:591
	+#: daemons/fenced/pacemaker-fenced.c:593
	#, fuzzy
	msgid ""
	"Some devices need much more/less time to complete than normal. Use this to "
	"specify an alternate, device-specific, timeout for 'reboot' actions."
	msgstr ""
	"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
	"于'reboot'操作的该设备特定的替代超时。"

	-#: daemons/fenced/pacemaker-fenced.c:599
	+#: daemons/fenced/pacemaker-fenced.c:601
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * The maximum number of times to try the 'reboot' "
	-"command within the timeout period"
	-msgstr "仅高级使用：在超时前重试'reboot'命令的最大次数"
	+"The maximum number of times to try the 'reboot' command within the timeout "
	+"period"
	+msgstr "在超时前重试'reboot'命令的最大次数"

	-#: daemons/fenced/pacemaker-fenced.c:602
	+#: daemons/fenced/pacemaker-fenced.c:603
	#, fuzzy
	msgid ""
	"Some devices do not support multiple connections. Operations may \"fail\" if "
	"the device is busy with another task. In that case, Pacemaker will "
	"automatically retry the operation if there is time remaining. Use this "
	"option to alter the number of times Pacemaker tries a 'reboot' action before "
	"giving up."
	msgstr ""
	"一些设备不支持多个连接。如果设备忙于另一个任务，则操作可能会'失败' ，因此"
	"Pacemaker将自动重试（如果时间允许）。使用此选项更改Pacemaker在放弃之前重"
	"试'reboot' 操作的次数."

	-#: daemons/fenced/pacemaker-fenced.c:612
	+#: daemons/fenced/pacemaker-fenced.c:613
	#, fuzzy
	-msgid "* Advanced Use Only * An alternate command to run instead of 'off'"
	-msgstr "仅高级使用：运行替代命令，而不是'off'"
	+msgid "An alternate command to run instead of 'off'"
	+msgstr "运行替代命令，而不是'off'"

	#: daemons/fenced/pacemaker-fenced.c:614
	#, fuzzy
	msgid ""
	"Some devices do not support the standard commands or may provide additional "
	"ones. Use this to specify an alternate, device-specific, command that "
	"implements the 'off' action."
	msgstr ""
	"一些设备不支持标准命令或可能提供其他命令,使用此选项可指定一个该设备专用的替代"
	"命令，用来实现'off'操作。"

	#: daemons/fenced/pacemaker-fenced.c:622
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * Specify an alternate timeout to use for 'off' "
	-"actions instead of stonith-timeout"
	-msgstr "仅高级使用：指定用于off 操作的替代超时，而不是stonith-timeout"
	+"Specify an alternate timeout to use for 'off' actions instead of stonith-"
	+"timeout"
	+msgstr "指定用于off 操作的替代超时，而不是stonith-timeout"

	-#: daemons/fenced/pacemaker-fenced.c:625
	+#: daemons/fenced/pacemaker-fenced.c:624
	#, fuzzy
	msgid ""
	"Some devices need much more/less time to complete than normal. Use this to "
	"specify an alternate, device-specific, timeout for 'off' actions."
	msgstr ""
	"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
	"于'off'操作的该设备特定的替代超时。"

	-#: daemons/fenced/pacemaker-fenced.c:633
	+#: daemons/fenced/pacemaker-fenced.c:632
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * The maximum number of times to try the 'off' "
	-"command within the timeout period"
	-msgstr "仅高级使用：在超时前重试'off'命令的最大次数"
	+"The maximum number of times to try the 'off' command within the timeout "
	+"period"
	+msgstr "在超时前重试'off'命令的最大次数"

	-#: daemons/fenced/pacemaker-fenced.c:636
	+#: daemons/fenced/pacemaker-fenced.c:634
	#, fuzzy
	msgid ""
	"Some devices do not support multiple connections. Operations may \"fail\" if "
	"the device is busy with another task. In that case, Pacemaker will "
	"automatically retry the operation if there is time remaining. Use this "
	"option to alter the number of times Pacemaker tries a 'off' action before "
	"giving up."
	msgstr ""
	" 一些设备不支持多个连接。如果设备忙于另一个任务，则操作可能会'失败' ，因此"
	"Pacemaker将自动重试（如果时间允许）。使用此选项更改Pacemaker在放弃之前重"
	"试'off' 操作的次数."

	-#: daemons/fenced/pacemaker-fenced.c:646
	+#: daemons/fenced/pacemaker-fenced.c:644
	#, fuzzy
	-msgid "* Advanced Use Only * An alternate command to run instead of 'on'"
	+msgid "An alternate command to run instead of 'on'"
	msgstr "仅高级使用：运行替代命令，而不是'on'"

	-#: daemons/fenced/pacemaker-fenced.c:648
	+#: daemons/fenced/pacemaker-fenced.c:645
	#, fuzzy
	msgid ""
	"Some devices do not support the standard commands or may provide additional "
	"ones. Use this to specify an alternate, device-specific, command that "
	"implements the 'on' action."
	msgstr ""
	"一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
	"代命令，用来实现'on'操作。"

	-#: daemons/fenced/pacemaker-fenced.c:656
	+#: daemons/fenced/pacemaker-fenced.c:653
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * Specify an alternate timeout to use for 'on' "
	-"actions instead of stonith-timeout"
	-msgstr "仅高级使用：指定用于on 操作的替代超时，而不是stonith-timeout"
	+"Specify an alternate timeout to use for 'on' actions instead of stonith-"
	+"timeout"
	+msgstr "指定用于on 操作的替代超时，而不是stonith-timeout"

	-#: daemons/fenced/pacemaker-fenced.c:659
	+#: daemons/fenced/pacemaker-fenced.c:655
	#, fuzzy
	msgid ""
	"Some devices need much more/less time to complete than normal. Use this to "
	"specify an alternate, device-specific, timeout for 'on' actions."
	msgstr ""
	"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
	"于'on'操作的该设备特定的替代超时。"

	-#: daemons/fenced/pacemaker-fenced.c:667
	+#: daemons/fenced/pacemaker-fenced.c:663
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * The maximum number of times to try the 'on' "
	-"command within the timeout period"
	-msgstr "仅高级使用：在超时前重试'on'命令的最大次数"
	+"The maximum number of times to try the 'on' command within the timeout period"
	+msgstr "在超时前重试'on'命令的最大次数"

	-#: daemons/fenced/pacemaker-fenced.c:670
	+#: daemons/fenced/pacemaker-fenced.c:665
	#, fuzzy
	msgid ""
	"Some devices do not support multiple connections. Operations may \"fail\" if "
	"the device is busy with another task. In that case, Pacemaker will "
	"automatically retry the operation if there is time remaining. Use this "
	"option to alter the number of times Pacemaker tries a 'on' action before "
	"giving up."
	msgstr ""
	" 一些设备不支持多个连接。如果设备忙于另一个任务，则操作可能会'失败' ，因此"
	"Pacemaker将自动重试（如果时间允许）。使用此选项更改Pacemaker在放弃之前重"
	"试'on' 操作的次数."

	-#: daemons/fenced/pacemaker-fenced.c:680
	+#: daemons/fenced/pacemaker-fenced.c:675
	#, fuzzy
	-msgid "* Advanced Use Only * An alternate command to run instead of 'list'"
	-msgstr "仅高级使用：运行替代命令，而不是'list'"
	+msgid "An alternate command to run instead of 'list'"
	+msgstr "运行替代命令，而不是'list'"

	-#: daemons/fenced/pacemaker-fenced.c:682
	+#: daemons/fenced/pacemaker-fenced.c:676
	#, fuzzy
	msgid ""
	"Some devices do not support the standard commands or may provide additional "
	"ones. Use this to specify an alternate, device-specific, command that "
	"implements the 'list' action."
	msgstr ""
	"一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
	"代命令，用来实现'list'操作。"

	-#: daemons/fenced/pacemaker-fenced.c:690
	+#: daemons/fenced/pacemaker-fenced.c:684
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * Specify an alternate timeout to use for 'list' "
	-"actions instead of stonith-timeout"
	-msgstr "仅高级使用：指定用于list 操作的替代超时，而不是stonith-timeout"
	+"Specify an alternate timeout to use for 'list' actions instead of stonith-"
	+"timeout"
	+msgstr "指定用于list 操作的替代超时，而不是stonith-timeout"

	-#: daemons/fenced/pacemaker-fenced.c:693
	+#: daemons/fenced/pacemaker-fenced.c:686
	#, fuzzy
	msgid ""
	"Some devices need much more/less time to complete than normal. Use this to "
	"specify an alternate, device-specific, timeout for 'list' actions."
	msgstr ""
	"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
	"于'list'操作的该设备特定的替代超时。"

	-#: daemons/fenced/pacemaker-fenced.c:701
	+#: daemons/fenced/pacemaker-fenced.c:694
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * The maximum number of times to try the 'list' "
	-"command within the timeout period"
	-msgstr "仅高级使用：在超时前重试'list'命令的最大次数"
	+"The maximum number of times to try the 'list' command within the timeout "
	+"period"
	+msgstr "在超时前重试'list'命令的最大次数"

	-#: daemons/fenced/pacemaker-fenced.c:704
	+#: daemons/fenced/pacemaker-fenced.c:696
	#, fuzzy
	msgid ""
	"Some devices do not support multiple connections. Operations may \"fail\" if "
	"the device is busy with another task. In that case, Pacemaker will "
	"automatically retry the operation if there is time remaining. Use this "
	"option to alter the number of times Pacemaker tries a 'list' action before "
	"giving up."
	msgstr ""
	" 一些设备不支持多个连接。如果设备忙于另一个任务，则操作可能会'失败' ，因此"
	"Pacemaker将自动重试（如果时间允许）。使用此选项更改Pacemaker在放弃之前重"
	"试'list' 操作的次数."

	-#: daemons/fenced/pacemaker-fenced.c:714
	+#: daemons/fenced/pacemaker-fenced.c:706
	#, fuzzy
	-msgid ""
	-"* Advanced Use Only * An alternate command to run instead of 'monitor'"
	-msgstr "仅高级使用：运行替代命令，而不是'monitor'"
	+msgid "An alternate command to run instead of 'monitor'"
	+msgstr "运行替代命令，而不是'monitor'"

	-#: daemons/fenced/pacemaker-fenced.c:716
	+#: daemons/fenced/pacemaker-fenced.c:707
	#, fuzzy
	msgid ""
	"Some devices do not support the standard commands or may provide additional "
	"ones. Use this to specify an alternate, device-specific, command that "
	"implements the 'monitor' action."
	msgstr ""
	"一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
	"代命令，用来实现'monitor'操作。"

	-#: daemons/fenced/pacemaker-fenced.c:724
	+#: daemons/fenced/pacemaker-fenced.c:715
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * Specify an alternate timeout to use for 'monitor' "
	-"actions instead of stonith-timeout"
	-msgstr "仅高级使用：指定用于monitor 操作的替代超时，而不是stonith-timeout"
	+"Specify an alternate timeout to use for 'monitor' actions instead of stonith-"
	+"timeout"
	+msgstr "指定用于monitor 操作的替代超时，而不是stonith-timeout"

	-#: daemons/fenced/pacemaker-fenced.c:727
	+#: daemons/fenced/pacemaker-fenced.c:717
	#, fuzzy
	msgid ""
	"Some devices need much more/less time to complete than normal. Use this to "
	"specify an alternate, device-specific, timeout for 'monitor' actions."
	msgstr ""
	"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
	"于'monitor'操作的该设备特定的替代超时。"

	-#: daemons/fenced/pacemaker-fenced.c:735
	+#: daemons/fenced/pacemaker-fenced.c:725
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * The maximum number of times to try the 'monitor' "
	-"command within the timeout period"
	-msgstr "仅高级使用：在超时前重试'monitor'命令的最大次数"
	+"The maximum number of times to try the 'monitor' command within the timeout "
	+"period"
	+msgstr "在超时前重试'monitor'命令的最大次数"

	-#: daemons/fenced/pacemaker-fenced.c:738
	+#: daemons/fenced/pacemaker-fenced.c:727
	#, fuzzy
	msgid ""
	"Some devices do not support multiple connections. Operations may \"fail\" if "
	"the device is busy with another task. In that case, Pacemaker will "
	"automatically retry the operation if there is time remaining. Use this "
	"option to alter the number of times Pacemaker tries a 'monitor' action "
	"before giving up."
	msgstr ""
	" 一些设备不支持多个连接。如果设备忙于另一个任务，则操作可能会'失败' ，因此"
	"Pacemaker将自动重试（如果时间允许）。使用此选项更改Pacemaker在放弃之前重"
	"试'monitor' 操作的次数."

	-#: daemons/fenced/pacemaker-fenced.c:748
	+#: daemons/fenced/pacemaker-fenced.c:737
	#, fuzzy
	-msgid ""
	-"* Advanced Use Only * An alternate command to run instead of 'status'"
	-msgstr "仅高级使用：运行替代命令，而不是'status'"
	+msgid "An alternate command to run instead of 'status'"
	+msgstr "运行替代命令，而不是'status'"

	-#: daemons/fenced/pacemaker-fenced.c:750
	+#: daemons/fenced/pacemaker-fenced.c:738
	#, fuzzy
	msgid ""
	"Some devices do not support the standard commands or may provide additional "
	"ones. Use this to specify an alternate, device-specific, command that "
	"implements the 'status' action."
	msgstr ""
	"一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
	"代命令，用来实现'status'操作。"

	-#: daemons/fenced/pacemaker-fenced.c:758
	+#: daemons/fenced/pacemaker-fenced.c:746
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * Specify an alternate timeout to use for 'status' "
	-"actions instead of stonith-timeout"
	-msgstr "仅高级使用：指定用于status 操作的替代超时，而不是stonith-timeout"
	+"Specify an alternate timeout to use for 'status' actions instead of stonith-"
	+"timeout"
	+msgstr "指定用于status 操作的替代超时，而不是stonith-timeout"

	-#: daemons/fenced/pacemaker-fenced.c:761
	+#: daemons/fenced/pacemaker-fenced.c:748
	#, fuzzy
	msgid ""
	"Some devices need much more/less time to complete than normal. Use this to "
	"specify an alternate, device-specific, timeout for 'status' actions."
	msgstr ""
	"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
	"于'status'操作的该设备特定的替代超时"

	-#: daemons/fenced/pacemaker-fenced.c:769
	+#: daemons/fenced/pacemaker-fenced.c:756
	#, fuzzy
	msgid ""
	-"* Advanced Use Only * The maximum number of times to try the 'status' "
	-"command within the timeout period"
	+"The maximum number of times to try the 'status' command within the timeout "
	+"period"
	msgstr "仅高级使用：在超时前重试'status'命令的最大次数"

	-#: daemons/fenced/pacemaker-fenced.c:772
	+#: daemons/fenced/pacemaker-fenced.c:758
	#, fuzzy
	msgid ""
	"Some devices do not support multiple connections. Operations may \"fail\" if "
	"the device is busy with another task. In that case, Pacemaker will "
	"automatically retry the operation if there is time remaining. Use this "
	"option to alter the number of times Pacemaker tries a 'status' action before "
	"giving up."
	msgstr ""
	" 一些设备不支持多个连接。如果设备忙于另一个任务，则操作可能会'失败' ，因此"
	"Pacemaker将自动重试（如果时间允许）。使用此选项更改Pacemaker在放弃之前重"
	"试'status' 操作的次数."

	-#: daemons/fenced/pacemaker-fenced.c:784
	+#: daemons/fenced/pacemaker-fenced.c:773
	msgid "Instance attributes available for all \"stonith\"-class resources"
	msgstr " 可用于所有stonith类资源的实例属性"

	-#: daemons/fenced/pacemaker-fenced.c:786
	+#: daemons/fenced/pacemaker-fenced.c:775
	msgid ""
	"Instance attributes available for all \"stonith\"-class resources and used "
	"by Pacemaker's fence daemon, formerly known as stonithd"
	msgstr ""
	" 可用于所有stonith类资源的实例属性，并由Pacemaker的fence守护程序使用（以前称"
	"为stonithd)"

	-#: daemons/fenced/pacemaker-fenced.c:801
	+#: daemons/fenced/pacemaker-fenced.c:811
	msgid "Deprecated (will be removed in a future release)"
	msgstr "已弃用(将在未来版本中删除)"

	-#: daemons/fenced/pacemaker-fenced.c:804
	+#: daemons/fenced/pacemaker-fenced.c:814
	msgid "Intended for use in regression testing only"
	msgstr "仅适用于回归测试"

	-#: daemons/fenced/pacemaker-fenced.c:807
	+#: daemons/fenced/pacemaker-fenced.c:817
	msgid "Send logs to the additional named logfile"
	msgstr "将日志发送到其他命名日志文件"

	#: lib/common/options.c:57
	msgid "Pacemaker version on cluster node elected Designated Controller (DC)"
	msgstr "集群选定的控制器节点(DC)的 Pacemaker 版本"

	#: lib/common/options.c:59
	#, fuzzy
	msgid ""
	"Includes a hash which identifies the exact revision the code was built from. "
	"Used for diagnostic purposes."
	msgstr "它包含一个标识所构建代码修订版本的哈希值. 其可用于诊断."

	#: lib/common/options.c:66
	#, fuzzy
	msgid "The messaging layer on which Pacemaker is currently running"
	msgstr "Pacemaker 当前运行的消息传递层"

	#: lib/common/options.c:67
	msgid "Used for informational and diagnostic purposes."
	msgstr "用于提供信息和诊断."

	#: lib/common/options.c:73
	msgid "An arbitrary name for the cluster"
	msgstr "任意的集群名称"

	#: lib/common/options.c:74
	msgid ""
	"This optional value is mostly for users' convenience as desired in "
	"administration, but may also be used in Pacemaker configuration rules via "
	"the #cluster-name node attribute, and by higher-level tools and resource "
	"agents."
	msgstr ""
	"该可选值主要是为了方便用户根据管理的需要使用, 可以通过 #cluster-name 节点属性"
	"在 Pacemaker 配置规则中使用, 以及被更高级的工具和资源代理使用."

	#: lib/common/options.c:83
	msgid "How long to wait for a response from other nodes during start-up"
	msgstr "启动过程中等待其他节点响应的时间"

	#: lib/common/options.c:84
	msgid ""
	"The optimal value will depend on the speed and load of your network and the "
	"type of switches used."
	msgstr "其最佳值将取决于您的网络速度和负载以及使用的交换机类型."

	#: lib/common/options.c:91
	msgid ""
	"Polling interval to recheck cluster state and evaluate rules with date "
	"specifications"
	msgstr "重新检查集群状态及评估日期规范规则的轮询间隔"

	#: lib/common/options.c:93
	#, fuzzy
	msgid ""
	"Pacemaker is primarily event-driven, and looks ahead to know when to recheck "
	"cluster state for failure-timeout settings and most time-based rules. "
	"However, it will also recheck the cluster after this amount of inactivity, "
	"to evaluate rules with date specifications and serve as a fail-safe for "
	"certain types of scheduler bugs. A value of 0 disables polling. A positive "
	"value sets an interval in seconds, unless other units are specified (for "
	"example, \"5min\")."
	msgstr ""
	"Pacemaker 主要是通过事件驱动的, 并会提前预测何时重新检查集群状态以评估大多数"
	"基于时间的规则以及 failure-timeout 配置, 然而无论如何, 经过指定的时间后如果没"
	"有活动, 它将重新检查集群, 以评估具有日期规范的规则, 并为某些类型的调度程序缺"
	"陷提供故障保护. 如果值为0, 将禁用轮询. 如果值为正数, 则设置以秒为单位的时间间"
	"隔, 除非指定了其它单位 (例如, \"5min\")."

	#: lib/common/options.c:107
	msgid "How a cluster node should react if notified of its own fencing"
	msgstr "集群节点在收到针对自己的 fence 操作结果通知时应如何反应"

	#: lib/common/options.c:108
	#, fuzzy
	msgid ""
	"A cluster node may receive notification of a \"succeeded\" fencing that "
	"targeted it if fencing is misconfigured, or if fabric fencing is in use that "
	"doesn't cut cluster communication. Use \"stop\" to attempt to immediately "
	"stop Pacemaker and stay stopped, or \"panic\" to attempt to immediately "
	"reboot the local node, falling back to stop on failure."
	msgstr ""
	"如果有错误的 fence 配置, 或者在使用 fabric fence 机制 (并不会切断集群通信), "
	"则集群节点可能会收到针对自己的 \"succeeded\" fence 结果通知. 使用 \"stop\" 尝"
	"试立即停止 pacemaker 并保持停止状态,或者使用 \"panic\" 尝试立即重新启动本地节"
	"点，如果失败则返回执行 stop."

	-#: lib/common/options.c:119 lib/common/options.c:128 lib/common/options.c:138
	-#: lib/common/options.c:147
	-#, fuzzy
	-msgid "* Advanced Use Only *"
	-msgstr "* Advanced Use Only(仅限高级用户使用) *"
	-
	-#: lib/common/options.c:120
	+#: lib/common/options.c:119
	msgid ""
	"Declare an election failed if it is not decided within this much time. If "
	"you need to adjust this value, it probably indicates the presence of a bug."
	msgstr ""
	"如果集群在本项设置时间内没有作出决定则宣布选举失败. 这可能表明当前存在错误, "
	"您需要调整该值."

	-#: lib/common/options.c:129
	+#: lib/common/options.c:128
	msgid ""
	"Exit immediately if shutdown does not complete within this much time. If you "
	"need to adjust this value, it probably indicates the presence of a bug."
	msgstr ""
	"如果在这段时间内关机仍未完成, pacemaker 将立即退出. 这可能表明当前存在错误, "
	"您需要调整该值."

	-#: lib/common/options.c:139 lib/common/options.c:148
	+#: lib/common/options.c:138 lib/common/options.c:147
	msgid ""
	"If you need to adjust this value, it probably indicates the presence of a "
	"bug."
	msgstr "这可能表明当前存在错误, 您需要调整该值."

	#: lib/common/options.c:155
	+#, fuzzy
	msgid ""
	-"* Advanced Use Only * Enabling this option will slow down cluster "
	-"recovery under all conditions"
	+"Enabling this option will slow down cluster recovery under all conditions"
	msgstr ""
	-"* Advanced Use Only(仅限高级用户使用) * 启用此选项将在所有情况下减慢集群"
	+"启用此选项将在所有情况下减慢集群"
	"恢复的速度"

	-#: lib/common/options.c:158
	+#: lib/common/options.c:157
	msgid ""
	"Delay cluster recovery for this much time to allow for additional events to "
	"occur. Useful if your configuration is sensitive to the order in which ping "
	"updates arrive."
	msgstr ""
	"集群恢复将被推迟指定的时间间隔, 以等待更多事件发生. 如果您的配置对 ping 更新"
	"到达的顺序很敏感, 则可以使用此选项."

	-#: lib/common/options.c:168
	+#: lib/common/options.c:167
	msgid "What to do when the cluster does not have quorum"
	msgstr "当集群没有达到必需票数时该如何做"

	-#: lib/common/options.c:175
	+#: lib/common/options.c:174
	msgid "Whether to lock resources to a cleanly shut down node"
	msgstr "是否锁定资源到完全关闭的节点"

	-#: lib/common/options.c:176
	+#: lib/common/options.c:175
	msgid ""
	"When true, resources active on a node when it is cleanly shut down are kept "
	"\"locked\" to that node (not allowed to run elsewhere) until they start "
	"again on that node after it rejoins (or for at most shutdown-lock-limit, if "
	"set). Stonith resources and Pacemaker Remote connections are never locked. "
	"Clone and bundle instances and the promoted role of promotable clones are "
	"currently never locked, though support could be added in a future release."
	msgstr ""
	"设置为 true 时, 在完全关闭的节点上活动的资源将被 \"locked\" 到该节点 (不允许"
	"在其它方运行), 直到该节点重新加入后它们再次在该节点上启动 (最长为 shutdown-"
	"lock-limit，如果已设置). Stonith 资源和 Pacemaker Remote 连接永远不会被锁定. "
	"克隆和捆绑实例以及可提升克隆的提升角色目前不会被锁定, 尽管可能在未来的发行版"
	"中添加支持. "

	-#: lib/common/options.c:189
	+#: lib/common/options.c:188
	msgid "Do not lock resources to a cleanly shut down node longer than this"
	msgstr "资源会被锁定到完全关闭的节点的最长时间"

	-#: lib/common/options.c:191
	+#: lib/common/options.c:190
	msgid ""
	"If shutdown-lock is true and this is set to a nonzero time duration, "
	"shutdown locks will expire after this much time has passed since the "
	"shutdown was initiated, even if the node has not rejoined."
	msgstr ""
	"如果 shutdown-lock 为 true, 并且将此选项设置为非零时间间隔, 则自关闭操作执行"
	"经过此时间后，shutdown lock 将过期, 即使该节点尚未重新加入也是如此. "

	-#: lib/common/options.c:200
	+#: lib/common/options.c:199
	msgid "Enable Access Control Lists (ACLs) for the CIB"
	msgstr "为 CIB 启用访问控制列表 (ACL) "

	-#: lib/common/options.c:207
	+#: lib/common/options.c:206
	msgid "Whether resources can run on any node by default"
	msgstr "默认情况下资源是否可以在任何节点上运行"

	-#: lib/common/options.c:214
	+#: lib/common/options.c:213
	msgid ""
	"Whether the cluster should refrain from monitoring, starting, and stopping "
	"resources"
	msgstr "集群是否应避免监视, 启动和停止资源"

	-#: lib/common/options.c:222
	+#: lib/common/options.c:221
	msgid ""
	"Whether a start failure should prevent a resource from being recovered on "
	"the same node"
	msgstr "资源启动失败是否应阻止在同一节点上恢复该资源"

	-#: lib/common/options.c:224
	+#: lib/common/options.c:223
	msgid ""
	"When true, the cluster will immediately ban a resource from a node if it "
	"fails to start there. When false, the cluster will instead check the "
	"resource's fail count against its migration-threshold."
	msgstr ""
	"当为true, 如果资源启动失败, 集群将立即禁止节点启动该资源, 当为false, 集群将检"
	"查资源的失败次数是否超过了其 migration-threshold. "

	-#: lib/common/options.c:232
	+#: lib/common/options.c:231
	msgid "Whether the cluster should check for active resources during start-up"
	msgstr "集群是否在启动期间检查活动的资源"

	-#: lib/common/options.c:242
	-msgid ""
	-"* Advanced Use Only * Whether nodes may be fenced as part of recovery"
	+#: lib/common/options.c:241
	+#, fuzzy
	+msgid "Whether nodes may be fenced as part of recovery"
	msgstr ""
	-"* Advanced Use Only(仅限高级用户使用) * 节点是否可以被 fence 作为集群恢复"
	+"节点是否可以被 fence 作为集群恢复"
	"的一部分"

	-#: lib/common/options.c:244
	+#: lib/common/options.c:242
	msgid ""
	"If false, unresponsive nodes are immediately assumed to be harmless, and "
	"resources that were active on them may be recovered elsewhere. This can "
	"result in a \"split-brain\" situation, potentially leading to data loss and/"
	"or service unavailability."
	msgstr ""
	"如果为 false, 则立即假定无响应的节点是无害的, 并且可以在其它位置恢复在其上活"
	"动的资源. 这可能会导致 \"split-brain\" 情况, 从而可能导致数据丢失和(或)服务不"
	"可用. "

	-#: lib/common/options.c:253
	+#: lib/common/options.c:251
	msgid ""
	"Action to send to fence device when a node needs to be fenced (\"poweroff\" "
	"is a deprecated alias for \"off\")"
	msgstr ""
	"当节点需要被 fence 时, 向 fence 设备发送的操作 (\"poweroff\" 作为 \"off\" 的"
	"别名已被弃用)"

	-#: lib/common/options.c:261
	+#: lib/common/options.c:259
	msgid ""
	"How long to wait for on, off, and reboot fence actions to complete by default"
	msgstr "默认情况下, 等待 on, off, 和 reboot fence 操作完成的时间"

	-#: lib/common/options.c:269
	+#: lib/common/options.c:267
	msgid "Whether watchdog integration is enabled"
	msgstr "是否启用 watchdog 集成设置"

	-#: lib/common/options.c:270
	+#: lib/common/options.c:268
	msgid ""
	"This is set automatically by the cluster according to whether SBD is "
	"detected to be in use. User-configured values are ignored. The value `true` "
	"is meaningful if diskless SBD is used and `stonith-watchdog-timeout` is "
	"nonzero. In that case, if fencing is required, watchdog-based self-fencing "
	"will be performed via SBD without requiring a fencing resource explicitly "
	"configured."
	msgstr ""
	"集群会根据是否检测到 SBD 正在使用来自动设置此值. 用户配置的值将被忽略. 如果使"
	"用了无盘 SBD 并且 `stonith-watchdog-timeout` 不为零, 则值 `true` 才有实际意"
	"义. 在这种情况下, 如果需要fence, 将通过 SBD 执行基于 watchdog 的自我 fence, "
	"而不需要明确配置 fence 资源."

	-#: lib/common/options.c:291
	+#: lib/common/options.c:289
	#, fuzzy
	msgid ""
	"How long before nodes can be assumed to be safely down when watchdog-based "
	"self-fencing via SBD is in use"
	msgstr ""
	"当基于 watchdog 的自我 fence 机制通过SBD 被执行时, 节点被认为安全下线的等待时"
	"间有多长"

	-#: lib/common/options.c:293
	+#: lib/common/options.c:291
	#, fuzzy
	msgid ""
	"If this is set to a positive value, lost nodes are assumed to achieve self-"
	"fencing using watchdog-based SBD within this much time. This does not "
	"require a fencing resource to be explicitly configured, though a "
	"fence_watchdog resource can be configured, to limit use to specific nodes. "
	"If this is set to 0 (the default), the cluster will never assume watchdog-"
	"based self-fencing. If this is set to a negative value, the cluster will use "
	"twice the local value of the `SBD_WATCHDOG_TIMEOUT` environment variable if "
	"that is positive, or otherwise treat this as 0. WARNING: When used, this "
	"timeout must be larger than `SBD_WATCHDOG_TIMEOUT` on all nodes that use "
	"watchdog-based SBD, and Pacemaker will refuse to start on any of those nodes "
	"where this is not true for the local value or SBD is not active. When this "
	"is set to a negative value, `SBD_WATCHDOG_TIMEOUT` must be set to the same "
	"value on all nodes that use SBD, otherwise data corruption or loss could "
	"occur."
	msgstr ""
	"如果设为正值, 丢失的节点将在设定的时间内被认定使用基于 watchdog 的 SBD 完成自"
	"我 fence. 这不需要明确配置一个 fence 资源, 但可以配置一个 fence_watchdog 资源"
	"来限制对特定节点使用. 如果设为0 (默认值), 集群将永远不会认定节点使用基于 "
	"watchdog 的自我 fence. 如果设为负值, 集群将使用本地 `SBD_WATCHDOG_TIMEOUT` 环"
	"境变量的两倍值(如果该值为正), 否则会将该值视为0. 警告: 在所有使用基于 "
	"watchdog 的 SBD 的节点上, 此超时值需大于 `SBD_WATCHDOG_TIMEOUT` 的值, 否则 "
	"Pacemaker 不会在任何不符合此条件的节点上启动, 也不会在任何未启用 SBD 的节点上"
	"启动. 当设为负值时所有使用 SBD 的节点上 `SBD_WATCHDOG_TIMEOUT` 的值必须设置为"
	"相同的值, 否则可能导致数据损坏或丢失."

	-#: lib/common/options.c:313
	+#: lib/common/options.c:311
	msgid ""
	"How many times fencing can fail before it will no longer be immediately re-"
	"attempted on a target"
	msgstr "fence 操作失败多少次会停止立即尝试"

	-#: lib/common/options.c:321
	+#: lib/common/options.c:319
	msgid "Allow performing fencing operations in parallel"
	msgstr "允许并行执行 fencing 操作"

	-#: lib/common/options.c:328
	-msgid "* Advanced Use Only * Whether to fence unseen nodes at start-up"
	+#: lib/common/options.c:326
	+#, fuzzy
	+msgid "Whether to fence unseen nodes at start-up"
	msgstr "* 仅高级使用 * 是否在启动时fence不可见节点"

	-#: lib/common/options.c:330
	+#: lib/common/options.c:327
	#, fuzzy
	msgid ""
	"Setting this to false may lead to a \"split-brain\" situation, potentially "
	"leading to data loss and/or service unavailability."
	msgstr ""
	"将此设置为 false 可能会导致 \"split-brain\" 的情况，可能导致数据丢失和(或)服"
	"务不可用。"

	-#: lib/common/options.c:337
	+#: lib/common/options.c:334
	msgid ""
	"Apply fencing delay targeting the lost nodes with the highest total resource "
	"priority"
	msgstr "针对具有最高总资源优先级的丢失节点应用fencing延迟"

	-#: lib/common/options.c:339
	+#: lib/common/options.c:336
	msgid ""
	"Apply specified delay for the fencings that are targeting the lost nodes "
	"with the highest total resource priority in case we don't have the majority "
	"of the nodes in our cluster partition, so that the more significant nodes "
	"potentially win any fencing match, which is especially meaningful under "
	"split-brain of 2-node cluster. A promoted resource instance takes the base "
	"priority + 1 on calculation if the base priority is not 0. Any static/random "
	"delays that are introduced by `pcmk_delay_base/max` configured for the "
	"corresponding fencing resources will be added to this delay. This delay "
	"should be significantly greater than, safely twice, the maximum "
	"`pcmk_delay_base/max`. By default, priority fencing delay is disabled."
	msgstr ""
	"如果我们所在的集群分区并不拥有大多数集群节点，则针对丢失节点的fence操作应用指"
	"定的延迟，这样更重要的节点就能够赢得fence竞赛。这对于双节点集群在split-brain"
	"状况下尤其有意义。如果基本优先级不为0，在计算时主资源实例获得基本优先级+1。任"
	"何对于相应的 fence 资源由 pcmk_delay_base/max 配置所引入的静态/随机延迟会被添"
	"加到此延迟。为了安全, 这个延迟应该明显大于 pcmk_delay_base/max 的最大设置值，"
	"例如两倍。默认情况下，优先级fencing延迟已禁用。"

	-#: lib/common/options.c:356
	+#: lib/common/options.c:353
	msgid ""
	"How long to wait for a node that has joined the cluster to join the "
	"controller process group"
	msgstr "等待已加入集群的节点加入控制器进程组的时间"

	-#: lib/common/options.c:358
	+#: lib/common/options.c:355
	msgid ""
	"Fence nodes that do not join the controller process group within this much "
	"time after joining the cluster, to allow the cluster to continue managing "
	"resources. A value of 0 means never fence pending nodes. Setting the value "
	"to 2h means fence nodes after 2 hours."
	msgstr ""
	"如果节点加入集群后在此时间内不加入控制器进程组，Fence该节点，以便群集继续管理"
	"资源。值为0表示永远不 fence 待定节点。将值设置为2h表示2小时后 fence 待定节"
	"点。"

	-#: lib/common/options.c:368
	+#: lib/common/options.c:365
	msgid "Maximum time for node-to-node communication"
	msgstr "最大节点间通信时间"

	-#: lib/common/options.c:369
	+#: lib/common/options.c:366
	msgid ""
	"The node elected Designated Controller (DC) will consider an action failed "
	"if it does not get a response from the node executing the action within this "
	"time (after considering the action's own timeout). The \"correct\" value "
	"will depend on the speed and load of your network and cluster nodes."
	msgstr ""
	"如果一个操作未在该时间内（并且考虑操作本身的超时时长）从执行该操作的节点获得"
	"响应，则会被选为指定控制器（DC）的节点认定为失败。\"正确\" 值将取决于速度和您"
	"的网络和集群节点的负载。"

	-#: lib/common/options.c:381
	+#: lib/common/options.c:378
	msgid "Maximum amount of system load that should be used by cluster nodes"
	msgstr "集群节点应该使用的最大系统负载量"

	-#: lib/common/options.c:383
	+#: lib/common/options.c:380
	msgid ""
	"The cluster will slow down its recovery process when the amount of system "
	"resources used (currently CPU) approaches this limit"
	msgstr "当使用的系统资源量（当前指 CPU）接近此限制时, 集群将减慢其恢复过程"

	-#: lib/common/options.c:390
	+#: lib/common/options.c:387
	msgid ""
	"Maximum number of jobs that can be scheduled per node (defaults to 2x cores)"
	msgstr "每个节点可以调度的最大作业数（默认为2x内核数）"

	-#: lib/common/options.c:398
	+#: lib/common/options.c:395
	#, fuzzy
	msgid ""
	"Maximum number of jobs that the cluster may execute in parallel across all "
	"nodes"
	msgstr "集群可以在所有节点上并发执行的最大作业数"

	-#: lib/common/options.c:400
	+#: lib/common/options.c:397
	msgid ""
	"The \"correct\" value will depend on the speed and load of your network and "
	"cluster nodes. If set to 0, the cluster will impose a dynamically calculated "
	"limit when any node has a high load."
	msgstr ""
	"\"正确\" 值将取决于速度和您的网络与集群节点的负载。如果设置为0，当任何节点具"
	"有高负载时，集群将施加一个动态计算的限制。"

	-#: lib/common/options.c:409
	+#: lib/common/options.c:406
	msgid ""
	"The number of live migration actions that the cluster is allowed to execute "
	"in parallel on a node (-1 means no limit)"
	msgstr "允许集群在一个节点上并行执行的实时迁移操作的数量(-1表示没有限制)"

	-#: lib/common/options.c:417
	+#: lib/common/options.c:414
	msgid "Maximum IPC message backlog before disconnecting a cluster daemon"
	msgstr "断开集群守护程序之前的最大IPC消息积压"

	-#: lib/common/options.c:418
	+#: lib/common/options.c:415
	msgid ""
	"Raise this if log has \"Evicting client\" messages for cluster daemon PIDs "
	"(a good value is the number of resources in the cluster multiplied by the "
	"number of nodes)."
	msgstr ""
	"如果日志中有针对集群守护程序PID的消息“Evicting client”，（则建议将值设为集群"
	"中的资源数量乘以节点数量）"

	-#: lib/common/options.c:428
	+#: lib/common/options.c:425
	#, fuzzy
	msgid "Whether the cluster should stop all active resources"
	msgstr "集群是否在启动期间检查运行资源"

	-#: lib/common/options.c:435
	+#: lib/common/options.c:432
	msgid "Whether to stop resources that were removed from the configuration"
	msgstr "是否停止配置已被删除的资源"

	-#: lib/common/options.c:443
	+#: lib/common/options.c:440
	msgid "Whether to cancel recurring actions removed from the configuration"
	msgstr "是否取消配置已被删除的的重复操作"

	-#: lib/common/options.c:451
	-msgid ""
	-"* Deprecated * Whether to remove stopped resources from the executor"
	-msgstr "*不推荐*是否从pacemaker-execd 守护进程中清除已停止的资源"
	+#: lib/common/options.c:448
	+#, fuzzy
	+msgid "Whether to remove stopped resources from the executor"
	+msgstr "是否从pacemaker-execd 守护进程中清除已停止的资源"

	-#: lib/common/options.c:453
	-msgid ""
	-"Values other than default are poorly tested and potentially dangerous. This "
	-"option will be removed in a future release."
	+#: lib/common/options.c:449
	+#, fuzzy
	+msgid "Values other than default are poorly tested and potentially dangerous."
	msgstr "非默认值未经过充分的测试，有潜在的风险。该选项将在未来的版本中删除。"

	-#: lib/common/options.c:462
	+#: lib/common/options.c:458
	msgid "The number of scheduler inputs resulting in errors to save"
	msgstr "保存导致错误的调度程序输入的数量"

	-#: lib/common/options.c:463 lib/common/options.c:470 lib/common/options.c:477
	+#: lib/common/options.c:459 lib/common/options.c:466 lib/common/options.c:473
	msgid "Zero to disable, -1 to store unlimited."
	msgstr "零表示禁用，-1表示存储不受限制。"

	-#: lib/common/options.c:469
	+#: lib/common/options.c:465
	msgid "The number of scheduler inputs resulting in warnings to save"
	msgstr "保存导致警告的调度程序输入的数量"

	-#: lib/common/options.c:476
	+#: lib/common/options.c:472
	msgid "The number of scheduler inputs without errors or warnings to save"
	msgstr "保存没有错误或警告的调度程序输入的数量"

	-#: lib/common/options.c:488
	+#: lib/common/options.c:484
	#, fuzzy
	msgid "How cluster should react to node health attributes"
	msgstr "集群节点对节点健康属性如何反应"

	-#: lib/common/options.c:489
	+#: lib/common/options.c:485
	msgid ""
	"Requires external entities to create node attributes (named with the prefix "
	"\"#health\") with values \"red\", \"yellow\", or \"green\"."
	msgstr ""
	"需要外部实体创建具有“red”,“yellow”或“green”值的节点属性(前缀为“#health”)"

	-#: lib/common/options.c:497
	+#: lib/common/options.c:493
	msgid "Base health score assigned to a node"
	msgstr "分配给节点的基本健康分数"

	-#: lib/common/options.c:498
	+#: lib/common/options.c:494
	msgid "Only used when \"node-health-strategy\" is set to \"progressive\"."
	msgstr "仅在“node-health-strategy”设置为“progressive”时使用。"

	-#: lib/common/options.c:505
	+#: lib/common/options.c:501
	msgid "The score to use for a node health attribute whose value is \"green\""
	msgstr "为节点健康属性值为“green”所使用的分数"

	-#: lib/common/options.c:507 lib/common/options.c:516 lib/common/options.c:525
	+#: lib/common/options.c:503 lib/common/options.c:512 lib/common/options.c:521
	msgid ""
	"Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive"
	"\"."
	msgstr "仅在“node-health-strategy”设置为“custom”或“progressive”时使用。"

	-#: lib/common/options.c:514
	+#: lib/common/options.c:510
	msgid "The score to use for a node health attribute whose value is \"yellow\""
	msgstr "为节点健康属性值为“yellow”所使用的分数"

	-#: lib/common/options.c:523
	+#: lib/common/options.c:519
	msgid "The score to use for a node health attribute whose value is \"red\""
	msgstr "为节点健康属性值为“red”所使用的分数"

	-#: lib/common/options.c:536
	+#: lib/common/options.c:532
	#, fuzzy
	msgid "How the cluster should allocate resources to nodes"
	msgstr "集群应该如何分配资源到节点"

	#: lib/common/cmdline.c:70
	msgid "Display software version and exit"
	msgstr "显示软件版本信息"

	#: lib/common/cmdline.c:73
	msgid "Increase debug output (may be specified multiple times)"
	msgstr "显示更多调试信息（可多次指定）"

	#: lib/common/cmdline.c:92
	msgid "FORMAT"
	msgstr "格式"

	#: lib/common/cmdline.c:94
	msgid "Specify file name for output (or \"-\" for stdout)"
	msgstr "指定输出的文件名或指定'-' 表示标准输出"

	#: lib/common/cmdline.c:94
	msgid "DEST"
	msgstr "目标"

	#: lib/common/cmdline.c:100
	msgid "Output Options:"
	msgstr "输出选项"

	#: lib/common/cmdline.c:100
	msgid "Show output help"
	msgstr "显示输出帮助"

	-#: tools/crm_resource.c:258
	+#: tools/crm_resource.c:201
	#, c-format
	msgid "Aborting because no messages received in %d seconds"
	msgstr "中止，因为在%d秒内没有接收到消息"

	-#: tools/crm_resource.c:929
	+#: tools/crm_resource.c:355
	#, c-format
	msgid "Invalid check level setting: %s"
	msgstr "无效的检查级别设置：%s"

	-#: tools/crm_resource.c:1016
	+#: tools/crm_resource.c:857
	#, c-format
	msgid ""
	"Resource '%s' not moved: active in %d locations (promoted in %d).\n"
	"To prevent '%s' from running on a specific location, specify a node.To "
	"prevent '%s' from being promoted at a specific location, specify a node and "
	"the --promoted option."
	msgstr ""
	"资源'%s'未移动：在%d个位置运行（其中在%d个位置为主实例）\n"
	"若要阻止'%s'在特定位置运行，请指定一个节点。若要防止'%s'在指定位置升级，指定"
	"一个节点并使用--promoted选项"

	-#: tools/crm_resource.c:1027
	+#: tools/crm_resource.c:868
	#, c-format
	msgid ""
	"Resource '%s' not moved: active in %d locations.\n"
	"To prevent '%s' from running on a specific location, specify a node."
	msgstr ""
	"资源%s未移动:在%d个位置运行\n"
	"若要防止'%s'运行在特定位置，指定一个节点"

	-#: tools/crm_resource.c:1104
	+#: tools/crm_resource.c:945
	#, c-format
	msgid "Could not get modified CIB: %s\n"
	msgstr "无法获得修改的CIB：%s\n"

	-#: tools/crm_resource.c:1182
	+#: tools/crm_resource.c:1023
	#, c-format
	msgid "No cluster connection to Pacemaker Remote node %s detected"
	msgstr "未检测到至pacemaker远程节点%s的集群连接"

	-#: tools/crm_resource.c:1243
	+#: tools/crm_resource.c:1084
	msgid "Must specify -t with resource type"
	msgstr "需要使用-t指定资源类型"

	-#: tools/crm_resource.c:1249
	+#: tools/crm_resource.c:1090
	msgid "Must supply -v with new value"
	msgstr "必须使用-v指定新值"

	-#: tools/crm_resource.c:1281
	+#: tools/crm_resource.c:1122
	msgid "Could not create executor connection"
	msgstr "无法创建到pacemaker-execd守护进程的连接"

	-#: tools/crm_resource.c:1306
	+#: tools/crm_resource.c:1147
	#, fuzzy, c-format
	msgid "Metadata query for %s failed: %s"
	msgstr "，查询%s的元数据失败: %s\n"

	-#: tools/crm_resource.c:1312
	+#: tools/crm_resource.c:1153
	#, c-format
	msgid "'%s' is not a valid agent specification"
	msgstr "'%s' 是一个无效的代理"

	-#: tools/crm_resource.c:1325
	+#: tools/crm_resource.c:1166
	msgid "--resource cannot be used with --class, --agent, and --provider"
	msgstr "--resource 不能与 --class, --agent, --provider一起使用"

	-#: tools/crm_resource.c:1330
	+#: tools/crm_resource.c:1171
	msgid ""
	"--class, --agent, and --provider can only be used with --validate and --"
	"force-*"
	msgstr "--class, --agent和--provider只能被用于--validate和--force-*"

	-#: tools/crm_resource.c:1339
	+#: tools/crm_resource.c:1180
	msgid "stonith does not support providers"
	msgstr "stonith 不支持提供者"

	-#: tools/crm_resource.c:1343
	+#: tools/crm_resource.c:1184
	#, c-format
	msgid "%s is not a known stonith agent"
	msgstr "%s 不是一个已知stonith代理"

	-#: tools/crm_resource.c:1348
	+#: tools/crm_resource.c:1189
	#, c-format
	msgid "%s:%s:%s is not a known resource"
	msgstr "%s:%s:%s 不是一个已知资源"

	-#: tools/crm_resource.c:1462
	+#: tools/crm_resource.c:1494
	#, c-format
	msgid "Error creating output format %s: %s"
	msgstr "创建输出格式错误 %s:%s"

	-#: tools/crm_resource.c:1489
	+#: tools/crm_resource.c:1515
	msgid "--expired requires --clear or -U"
	msgstr "--expired需要和--clear或-U一起使用"

	-#: tools/crm_resource.c:1506
	+#: tools/crm_resource.c:1532
	#, c-format
	msgid "Error parsing '%s' as a name=value pair"
	msgstr "'%s'解析错误，格式为name=value"

	-#: tools/crm_resource.c:1601
	+#: tools/crm_resource.c:1631
	msgid "Must supply a resource id with -r"
	msgstr "必须使用-r指定资源id"

	-#: tools/crm_resource.c:1607
	+#: tools/crm_resource.c:1637
	msgid "Must supply a node name with -N"
	msgstr "必须使用-N指定节点名称"

	-#: tools/crm_resource.c:1625
	+#: tools/crm_resource.c:1651
	msgid "Could not create CIB connection"
	msgstr "无法创建到CIB的连接"

	-#: tools/crm_resource.c:1633
	+#: tools/crm_resource.c:1659
	#, c-format
	msgid "Could not connect to the CIB: %s"
	msgstr "不能连接到CIB：%s"

	-#: tools/crm_resource.c:1654
	+#: tools/crm_resource.c:1682
	#, c-format
	msgid "Resource '%s' not found"
	msgstr "没有发现'%s'资源"

	-#: tools/crm_resource.c:1668
	+#: tools/crm_resource.c:1694
	#, c-format
	msgid "Cannot operate on clone resource instance '%s'"
	msgstr "不能操作克隆资源实例'%s'"

	-#: tools/crm_resource.c:1680
	+#: tools/crm_resource.c:1706
	#, c-format
	msgid "Node '%s' not found"
	msgstr "没有发现%s节点"

	-#: tools/crm_resource.c:1691
	+#: tools/crm_resource.c:1717
	#, c-format
	msgid "Error connecting to the controller: %s"
	msgstr "连接到控制器错误：%s"

	-#: tools/crm_resource.c:1700
	+#: tools/crm_resource.c:1726
	#, fuzzy, c-format
	msgid "Error connecting to %s: %s"
	msgstr "连接到控制器错误：%s"

	-#: tools/crm_resource.c:1961
	+#: tools/crm_resource.c:1986
	msgid "You need to supply a value with the -v option"
	msgstr "需要使用-v选项提供一个值"

	-#: tools/crm_resource.c:2017
	+#: tools/crm_resource.c:2040
	msgid "You need to specify a resource type with -t"
	msgstr "需要使用-t指定资源类型"

	-#: tools/crm_resource.c:2024
	+#: tools/crm_resource.c:2047
	#, fuzzy, c-format
	msgid "Could not delete resource %s: %s"
	msgstr "无法删除资源：%s：%s"

	-#: tools/crm_resource.c:2034
	+#: tools/crm_resource.c:2057
	#, c-format
	msgid "Unimplemented command: %d"
	msgstr "无效的命令：%d"

	-#: tools/crm_resource.c:2064
	+#: tools/crm_resource.c:2087
	#, c-format
	msgid "Error performing operation: %s"
	msgstr "执行操作错误：%s"

	+#, fuzzy
	+#~ msgid "For example, \"node1,node2,node3\"."
	+#~ msgstr "例如, \"node1,node2,node3\"."
	+
	+#, fuzzy
	+#~ msgid "* Advanced Use Only *"
	+#~ msgstr "* Advanced Use Only(仅限高级用户使用) *"
	+
	#, fuzzy
	#~ msgid ""
	#~ "Zero disables polling, while positive values are an interval in seconds "
	#~ "(unless other units are specified, for example \"5min\")"
	#~ msgstr ""
	#~ "0 表示禁用轮询，而正值表示以秒为单位的时间间隔(除非指定了其他单位, 例如 "
	#~ "\"5min\" 表示5分钟)"

	#~ msgid " Allowed values: "
	#~ msgstr " 允许的值: "

	#~ msgid ""
	#~ "This value is not used by Pacemaker, but is kept for backward "
	#~ "compatibility, and certain legacy fence agents might use it."
	#~ msgstr ""
	#~ "Pacemaker不使用此值，但保留此值是为了向后兼容，某些传统的fence 代理可能会"
	#~ "使用它。"

	#~ msgid "No agents found for standard '%s'"
	#~ msgstr "没有发现指定的'%s'标准代理"

	#, fuzzy
	#~ msgid "No agents found for standard '%s' and provider '%s'"
	#~ msgstr "没有发现指定的标准%s和提供者%S的资源代理"

	#~ msgid "No %s found for %s"
	#~ msgstr "没有发现%s符合%s"

	#~ msgid "No %s found"
	#~ msgstr "没有发现%s"

	#~ msgid ""
	#~ "If nonzero, along with `have-watchdog=true` automatically set by the "
	#~ "cluster, when fencing is required, watchdog-based self-fencing will be "
	#~ "performed via SBD without requiring a fencing resource explicitly "
	#~ "configured. If `stonith-watchdog-timeout` is set to a positive value, "
	#~ "unseen nodes are assumed to self-fence within this much time. +WARNING:+ "
	#~ "It must be ensured that this value is larger than the "
	#~ "`SBD_WATCHDOG_TIMEOUT` environment variable on all nodes. Pacemaker "
	#~ "verifies the settings individually on all nodes and prevents startup or "
	#~ "shuts down if configured wrongly on the fly. It's strongly recommended "
	#~ "that `SBD_WATCHDOG_TIMEOUT` is set to the same value on all nodes. If "
	#~ "`stonith-watchdog-timeout` is set to a negative value, and "
	#~ "`SBD_WATCHDOG_TIMEOUT` is set, twice that value will be used. +WARNING:+ "
	#~ "In this case, it's essential (currently not verified by Pacemaker) that "
	#~ "`SBD_WATCHDOG_TIMEOUT` is set to the same value on all nodes."
	#~ msgstr ""
	#~ "如果值非零，且集群设置了 `have-watchdog=true` ，当需要 fence 操作时，基于 "
	#~ "watchdog 的自我 fence 机制将通过SBD执行，而不需要显式配置 fence 资源。如"
	#~ "果 `stonith-watchdog-timeout` 被设为正值，则假定不可见的节点在这段时间内自"
	#~ "我fence。 +WARNING:+ 必须确保该值大于所有节点上的`SBD_WATCHDOG_TIMEOUT` 环"
	#~ "境变量。Pacemaker将在所有节点上单独验证设置，如发现有错误的动态配置，将防"
	#~ "止节点启动或关闭。强烈建议在所有节点上将 `SBD_WATCHDOG_TIMEOUT` 设置为相同"
	#~ "的值。如果 `stonith-watchdog-timeout` 设置为负值。并且设置了 "
	#~ "`SBD_WATCHDOG_TIMEOUT` ，则将使用该值的两倍， +WARNING:+ 在这种情况下，必"
	#~ "须将所有节点上 `SBD_WATCHDOG_TIMEOUT` 设置为相同的值(目前没有通过pacemaker"
	#~ "验证)。"

File Metadata

Mime Type: text/x-diff
Expires: Sat, Nov 23, 4:46 PM (17 h, 28 m)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 1018934
Default Alt Text: (59 KB)

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions