No OneTemporary
Actions

Size

74 KB

Referenced Files

None

Subscribers

None

View Options

	diff --git a/doc/sphinx/Pacemaker_Explained/options.rst b/doc/sphinx/Pacemaker_Explained/options.rst
	index 2261024423..e78172a356 100644
	--- a/doc/sphinx/Pacemaker_Explained/options.rst
	+++ b/doc/sphinx/Pacemaker_Explained/options.rst
	@@ -1,504 +1,612 @@
	Cluster-Wide Configuration
	--------------------------

	-.. Convert_to_RST:
	-
	- == Configuration Layout ==
	-
	- The cluster is defined by the Cluster Information Base (CIB),
	- which uses XML notation. The simplest CIB, an empty one, looks like this:
	-
	- .An empty configuration
	- ======
	- [source,XML]
	- -------
	- <cib crm_feature_set="3.0.7" validate-with="pacemaker-1.2" admin_epoch="1" epoch="0" num_updates="0">
	- <configuration>
	- <crm_config/>
	- <nodes/>
	- <resources/>
	- <constraints/>
	- </configuration>
	- <status/>
	- </cib>
	- -------
	- ======
	-
	- The empty configuration above contains the major sections that make up a CIB:
	-
	- * +cib+: The entire CIB is enclosed with a +cib+ tag. Certain fundamental settings
	- are defined as attributes of this tag.
	-
	- ** +configuration+: This section -- the primary focus of this document --
	- contains traditional configuration information such as what resources the
	- cluster serves and the relationships among them.
	-
	- *** +crm_config+: cluster-wide configuration options
	- *** +nodes+: the machines that host the cluster
	- *** +resources+: the services run by the cluster
	- *** +constraints+: indications of how resources should be placed
	-
	- ** +status+: This section contains the history of each resource on each node.
	- Based on this data, the cluster can construct the complete current
	- state of the cluster. The authoritative source for this section
	- is the local executor (pacemaker-execd process) on each cluster node, and
	- the cluster will occasionally repopulate the entire section. For this
	- reason, it is never written to disk, and administrators are advised
	- against modifying it in any way.
	-
	- In this document, configuration settings will be described as 'properties' or 'options'
	- based on how they are defined in the CIB:
	-
	- * Properties are XML attributes of an XML element.
	- * Options are name-value pairs expressed as +nvpair+ child elements of an XML element.
	-
	- Normally, you will use command-line tools that abstract the XML, so the
	- distinction will be unimportant; both properties and options are
	- cluster settings you can tweak.
	-
	- == CIB Properties ==
	-
	- Certain settings are defined by CIB properties (that is, attributes of the
	- +cib+ tag) rather than with the rest of the cluster configuration in the
	- +configuration+ section.
	-
	- The reason is simply a matter of parsing. These options are used by the
	- configuration database which is, by design, mostly ignorant of the content it
	- holds. So the decision was made to place them in an easy-to-find location.
	-
	- .CIB Properties
	- [width="95%",cols="2m,<5",options="header",align="center"]
	- \|=========================================================
	- \|Field \|Description
	-
	- \| admin_epoch \|
	- indexterm:[Configuration Version,Cluster]
	- indexterm:[Cluster,Option,Configuration Version]
	- indexterm:[admin_epoch,Cluster Option]
	- indexterm:[Cluster,Option,admin_epoch]
	- When a node joins the cluster, the cluster performs a check to see
	- which node has the best configuration. It asks the node with the highest
	- (+admin_epoch+, +epoch+, +num_updates+) tuple to replace the configuration on
	- all the nodes -- which makes setting them, and setting them correctly, very
	- important. +admin_epoch+ is never modified by the cluster; you can use this
	- to make the configurations on any inactive nodes obsolete. _Never set this
	- value to zero_. In such cases, the cluster cannot tell the difference between
	- your configuration and the "empty" one used when nothing is found on disk.
	-
	- \| epoch \|
	- indexterm:[epoch,Cluster Option]
	- indexterm:[Cluster,Option,epoch]
	- The cluster increments this every time the configuration is updated (usually by
	- the administrator).
	-
	- \| num_updates \|
	- indexterm:[num_updates,Cluster Option]
	- indexterm:[Cluster,Option,num_updates]
	- The cluster increments this every time the configuration or status is updated
	- (usually by the cluster) and resets it to 0 when epoch changes.
	-
	- \| validate-with \|
	- indexterm:[validate-with,Cluster Option]
	- indexterm:[Cluster,Option,validate-with]
	- Determines the type of XML validation that will be done on the configuration.
	- If set to +none+, the cluster will not verify that updates conform to the
	- DTD (nor reject ones that don't). This option can be useful when
	- operating a mixed-version cluster during an upgrade.
	-
	- \|cib-last-written \|
	- indexterm:[cib-last-written,Cluster Property]
	- indexterm:[Cluster,Property,cib-last-written]
	- Indicates when the configuration was last written to disk. Maintained by the
	- cluster; for informational purposes only.
	-
	- \|have-quorum \|
	- indexterm:[have-quorum,Cluster Property]
	- indexterm:[Cluster,Property,have-quorum]
	- Indicates if the cluster has quorum. If false, this may mean that the
	- cluster cannot start resources or fence other nodes (see
	- +no-quorum-policy+ below). Maintained by the cluster.
	-
	- \|dc-uuid \|
	- indexterm:[dc-uuid,Cluster Property]
	- indexterm:[Cluster,Property,dc-uuid]
	- Indicates which cluster node is the current leader. Used by the
	- cluster when placing resources and determining the order of some
	- events. Maintained by the cluster.
	-
	- \|=========================================================
	+.. index::
	+ pair: XML element; cib
	+ pair: XML element; configuration
	+
	+Configuration Layout
	+####################
	+
	+The cluster is defined by the Cluster Information Base (CIB), which uses XML
	+notation. The simplest CIB, an empty one, looks like this:
	+
	+.. topic:: An empty configuration
	+
	+ .. code-block:: xml
	+
	+ <cib crm_feature_set="3.6.0" validate-with="pacemaker-3.5" epoch="1" num_updates="0" admin_epoch="0">
	+ <configuration>
	+ <crm_config/>
	+ <nodes/>
	+ <resources/>
	+ <constraints/>
	+ </configuration>
	+ <status/>
	+ </cib>
	+
	+The empty configuration above contains the major sections that make up a CIB:
	+
	+* ``cib``: The entire CIB is enclosed with a ``cib`` element. Certain
	+ fundamental settings are defined as attributes of this element.
	+
	+ * ``configuration``: This section -- the primary focus of this document --
	+ contains traditional configuration information such as what resources the
	+ cluster serves and the relationships among them.
	+
	+ * ``crm_config``: cluster-wide configuration options
	+
	+ * ``nodes``: the machines that host the cluster
	+
	+ * ``resources``: the services run by the cluster
	+
	+ * ``constraints``: indications of how resources should be placed
	+
	+ * ``status``: This section contains the history of each resource on each
	+ node. Based on this data, the cluster can construct the complete current
	+ state of the cluster. The authoritative source for this section is the
	+ local executor (pacemaker-execd process) on each cluster node, and the
	+ cluster will occasionally repopulate the entire section. For this reason,
	+ it is never written to disk, and administrators are advised against
	+ modifying it in any way.
	+
	+In this document, configuration settings will be described as properties or
	+options based on how they are defined in the CIB:
	+
	+* Properties are XML attributes of an XML element.
	+
	+* Options are name-value pairs expressed as ``nvpair`` child elements of an XML
	+ element.
	+
	+Normally, you will use command-line tools that abstract the XML, so the
	+distinction will be unimportant; both properties and options are cluster
	+settings you can tweak.
	+
	+CIB Properties
	+##############
	+
	+Certain settings are defined by CIB properties (that is, attributes of the
	+``cib`` tag) rather than with the rest of the cluster configuration in the
	+``configuration`` section.
	+
	+The reason is simply a matter of parsing. These options are used by the
	+configuration database which is, by design, mostly ignorant of the content it
	+holds. So the decision was made to place them in an easy-to-find location.
	+
	+.. table:: CIB Properties
	+
	+ +------------------+-----------------------------------------------------------+
	+ \| Attribute \| Description \|
	+ +==================+===========================================================+
	+ \| admin_epoch \| .. index:: \|
	+ \| \| pair: admin_epoch; cib \|
	+ \| \| \|
	+ \| \| When a node joins the cluster, the cluster performs a \|
	+ \| \| check to see which node has the best configuration. It \|
	+ \| \| asks the node with the highest (``admin_epoch``, \|
	+ \| \| ``epoch``, ``num_updates``) tuple to replace the \|
	+ \| \| configuration on all the nodes -- which makes setting \|
	+ \| \| them, and setting them correctly, very important. \|
	+ \| \| ``admin_epoch`` is never modified by the cluster; you can \|
	+ \| \| use this to make the configurations on any inactive nodes \|
	+ \| \| obsolete. \|
	+ \| \| \|
	+ \| \| .. warning:: \|
	+ \| \| Never set this value to zero. In such cases, the \|
	+ \| \| cluster cannot tell the difference between your \|
	+ \| \| configuration and the "empty" one used when nothing is \|
	+ \| \| found on disk. \|
	+ +------------------+-----------------------------------------------------------+
	+ \| epoch \| .. index:: \|
	+ \| \| pair: epoch; cib \|
	+ \| \| \|
	+ \| \| The cluster increments this every time the configuration \|
	+ \| \| is updated (usually by the administrator). \|
	+ +------------------+-----------------------------------------------------------+
	+ \| num_updates \| .. index:: \|
	+ \| \| pair: num_updates; cib \|
	+ \| \| \|
	+ \| \| The cluster increments this every time the configuration \|
	+ \| \| or status is updated (usually by the cluster) and resets \|
	+ \| \| it to 0 when epoch changes. \|
	+ +------------------+-----------------------------------------------------------+
	+ \| validate-with \| .. index:: \|
	+ \| \| pair: validate-with; cib \|
	+ \| \| \|
	+ \| \| Determines the type of XML validation that will be done \|
	+ \| \| on the configuration. If set to ``none``, the cluster \|
	+ \| \| will not verify that updates conform to the DTD (nor \|
	+ \| \| reject ones that don't). \|
	+ +------------------+-----------------------------------------------------------+
	+ \| cib-last-written \| .. index:: \|
	+ \| \| pair: cib-last-written; cib \|
	+ \| \| \|
	+ \| \| Indicates when the configuration was last written to \|
	+ \| \| disk. Maintained by the cluster; for informational \|
	+ \| \| purposes only. \|
	+ +------------------+-----------------------------------------------------------+
	+ \| have-quorum \| .. index:: \|
	+ \| \| pair: have-quorum; cib \|
	+ \| \| \|
	+ \| \| Indicates if the cluster has quorum. If false, this may \|
	+ \| \| mean that the cluster cannot start resources or fence \|
	+ \| \| other nodes (see ``no-quorum-policy`` below). Maintained \|
	+ \| \| by the cluster. \|
	+ +------------------+-----------------------------------------------------------+
	+ \| dc-uuid \| .. index:: \|
	+ \| \| pair: dc-uuid; cib \|
	+ \| \| \|
	+ \| \| Indicates which cluster node is the current leader. Used \|
	+ \| \| by the cluster when placing resources and determining the \|
	+ \| \| order of some events. Maintained by the cluster. \|
	+ +------------------+-----------------------------------------------------------+

	.. _cluster_options:

	Cluster Options
	###############
	-
	-.. Convert_to_RST_2:

	- Cluster options, as you might expect, control how the cluster behaves
	- when confronted with certain situations.
	-
	- They are grouped into sets within the +crm_config+ section, and, in advanced
	- configurations, there may be more than one set. (This will be described later
	- in the section on <<ch-rules>> where we will show how to have the cluster use
	- different sets of options during working hours than during weekends.) For now,
	- we will describe the simple case where each option is present at most once.
	-
	- You can obtain an up-to-date list of cluster options, including
	- their default values, by running the `man pacemaker-schedulerd` and
	- `man pacemaker-controld` commands.
	-
	- .Cluster Options
	- [width="95%",cols="5m,2,<11",options="header",align="center"]
	- \|=========================================================
	- \|Option \|Default \|Description
	-
	- \| cluster-name \| \|
	- indexterm:[cluster-name,Cluster Property]
	- indexterm:[Cluster,Property,cluster-name]
	- An (optional) name for the cluster as a whole. This is mostly for users'
	- convenience for use as desired in administration, but this can be used
	- in the Pacemaker configuration in <<ch-rules,rules>> (as the
	- +#cluster-name+ <<node-attribute-expressions-special,node attribute>>). It may
	- also be used by higher-level tools when displaying cluster information, and by
	- certain resource agents (for example, the +ocf:heartbeat:GFS2+ agent stores the
	- cluster name in filesystem meta-data).
	-
	- \| dc-version \| \|
	- indexterm:[dc-version,Cluster Property]
	- indexterm:[Cluster,Property,dc-version]
	- Version of Pacemaker on the cluster's DC.
	- Determined automatically by the cluster.
	- Often includes the hash which identifies the exact Git changeset it was built
	- from. Used for diagnostic purposes.
	-
	- \| cluster-infrastructure \| \|
	- indexterm:[cluster-infrastructure,Cluster Property]
	- indexterm:[Cluster,Property,cluster-infrastructure]
	- The messaging stack on which Pacemaker is currently running.
	- Determined automatically by the cluster.
	- Used for informational and diagnostic purposes.
	-
	- \| no-quorum-policy \| stop
	- a\|
	- indexterm:[no-quorum-policy,Cluster Option]
	- indexterm:[Cluster,Option,no-quorum-policy]
	- What to do when the cluster does not have quorum. Allowed values:
	-
	- * +ignore:+ continue all resource management
	- * +freeze:+ continue resource management, but don't recover resources from nodes not in the affected partition
	- * +stop:+ stop all resources in the affected cluster partition
	- * +demote:+ demote promotable resources and stop all other resources in the
	- affected cluster partition
	- * +suicide:+ fence all nodes in the affected cluster partition
	-
	- \| batch-limit \| 0 \|
	- indexterm:[batch-limit,Cluster Option]
	- indexterm:[Cluster,Option,batch-limit]
	- The maximum number of actions that the cluster may execute in parallel across
	- all nodes. The "correct" value will depend on the speed and load of your
	- network and cluster nodes. If zero, the cluster will impose a dynamically
	- calculated limit only when any node has high load.
	-
	- \| migration-limit \| -1 \|
	- indexterm:[migration-limit,Cluster Option]
	- indexterm:[Cluster,Option,migration-limit]
	- The number of <<s-migrating-resources,live migration>> actions that the cluster
	- is allowed to execute in parallel on a node. A value of -1 means unlimited.
	-
	- \| symmetric-cluster \| TRUE \|
	- indexterm:[symmetric-cluster,Cluster Option]
	- indexterm:[Cluster,Option,symmetric-cluster]
	- Can all resources run on any node by default?
	-
	- \| stop-all-resources \| FALSE \|
	- indexterm:[stop-all-resources,Cluster Option]
	- indexterm:[Cluster,Option,stop-all-resources]
	- Should the cluster stop all resources?
	-
	- \| stop-orphan-resources \| TRUE \|
	- indexterm:[stop-orphan-resources,Cluster Option]
	- indexterm:[Cluster,Option,stop-orphan-resources]
	- Should deleted resources be stopped? This value takes precedence over
	- +is-managed+ (i.e. even unmanaged resources will be stopped if deleted from
	- the configuration when this value is TRUE).
	-
	- \| stop-orphan-actions \| TRUE \|
	- indexterm:[stop-orphan-actions,Cluster Option]
	- indexterm:[Cluster,Option,stop-orphan-actions]
	- Should deleted actions be cancelled?
	-
	- \| start-failure-is-fatal \| TRUE \|
	- indexterm:[start-failure-is-fatal,Cluster Option]
	- indexterm:[Cluster,Option,start-failure-is-fatal]
	- Should a failure to start a resource on a particular node prevent further start
	- attempts on that node? If FALSE, the cluster will decide whether the same
	- node is still eligible based on the resource's current failure count
	- and +migration-threshold+ (see <<s-failure-handling>>).
	-
	- \| enable-startup-probes \| TRUE \|
	- indexterm:[enable-startup-probes,Cluster Option]
	- indexterm:[Cluster,Option,enable-startup-probes]
	- Should the cluster check for active resources during startup?
	-
	- \| maintenance-mode \| FALSE \|
	- indexterm:[maintenance-mode,Cluster Option]
	- indexterm:[Cluster,Option,maintenance-mode]
	- Should the cluster refrain from monitoring, starting and stopping resources?
	-
	- \| stonith-enabled \| TRUE \|
	- indexterm:[stonith-enabled,Cluster Option]
	- indexterm:[Cluster,Option,stonith-enabled]
	- Should failed nodes and nodes with resources that can't be stopped be
	- shot? If you value your data, set up a STONITH device and enable this.
	-
	- If true, or unset, the cluster will refuse to start resources unless
	- one or more STONITH resources have been configured.
	- If false, unresponsive nodes are immediately assumed to be running no
	- resources, and resource takeover to online nodes starts without any
	- further protection (which means _data loss_ if the unresponsive node
	- still accesses shared storage, for example). See also the +requires+
	- meta-attribute in <<s-resource-options>>.
	-
	- \| stonith-action \| reboot \|
	- indexterm:[stonith-action,Cluster Option]
	- indexterm:[Cluster,Option,stonith-action]
	- Action to send to STONITH device. Allowed values are +reboot+ and +off+.
	- The value +poweroff+ is also allowed, but is only used for
	- legacy devices.
	-
	- \| stonith-timeout \| 60s \|
	- indexterm:[stonith-timeout,Cluster Option]
	- indexterm:[Cluster,Option,stonith-timeout]
	- How long to wait for STONITH actions (reboot, on, off) to complete
	-
	- \| stonith-max-attempts \| 10 \|
	- indexterm:[stonith-max-attempts,Cluster Option]
	- indexterm:[Cluster,Option,stonith-max-attempts]
	- How many times fencing can fail for a target before the cluster will no longer
	- immediately re-attempt it.
	-
	- \| stonith-watchdog-timeout \| 0 \|
	- indexterm:[stonith-watchdog-timeout,Cluster Option]
	- indexterm:[Cluster,Option,stonith-watchdog-timeout]
	- If nonzero, along with `have-watchdog=true` automatically set by the
	- cluster, when fencing is required, watchdog-based self-fencing
	- will be performed via SBD without requiring a fencing resource
	- explicitly configured.
	- If `stonith-watchdog-timeout` is set to a positive value, unseen
	- nodes are assumed to self-fence within this much time. +WARNING:+
	- It must be ensured that this value is larger than the
	- `SBD_WATCHDOG_TIMEOUT` environment variable on all nodes.
	- Pacemaker verifies the settings individually on all nodes and
	- prevents startup or shuts down if configured wrongly on the fly.
	- It's strongly recommended that `SBD_WATCHDOG_TIMEOUT` is set to
	- the same value on all nodes.
	- If `stonith-watchdog-timeout` is set to a negative value, and
	- `SBD_WATCHDOG_TIMEOUT` is set, twice that value will be used.
	- +WARNING:+ In this case, it's essential (currently not verified by
	- pacemaker) that `SBD_WATCHDOG_TIMEOUT` is set to the same value on
	- all nodes.
	+Cluster options, as you might expect, control how the cluster behaves when
	+confronted with various situations.
	+
	+They are grouped into sets within the ``crm_config`` section. In advanced
	+configurations, there may be more than one set. (This will be described later
	+in the chapter on :ref:`rules` where we will show how to have the cluster use
	+different sets of options during working hours than during weekends.) For now,
	+we will describe the simple case where each option is present at most once.
	+
	+You can obtain an up-to-date list of cluster options, including their default
	+values, by running the ``man pacemaker-schedulerd`` and
	+``man pacemaker-controld`` commands.
	+
	+.. table:: Cluster Options

	- \| concurrent-fencing \| FALSE \|
	- indexterm:[concurrent-fencing,Cluster Option]
	- indexterm:[Cluster,Option,concurrent-fencing]
	- Is the cluster allowed to initiate multiple fence actions concurrently?
	-
	- \| fence-reaction \| stop \|
	- indexterm:[fence-reaction,Cluster Option]
	- indexterm:[Cluster,Option,fence-reaction]
	- How should a cluster node react if notified of its own fencing? A cluster node
	- may receive notification of its own fencing if fencing is misconfigured, or if
	- fabric fencing is in use that doesn't cut cluster communication. Allowed values
	- are +stop+ to attempt to immediately stop pacemaker and stay stopped, or
	- +panic+ to attempt to immediately reboot the local node, falling back to stop
	- on failure. The default is likely to be changed to +panic+ in a future release.
	- '(since 2.0.3)'
	-
	- \| priority-fencing-delay \| 0 \|
	- indexterm:[priority-fencing-delay,Cluster Option]
	- indexterm:[Cluster,Option,priority-fencing-delay]
	- Apply specified delay for the fencings that are targeting the lost
	- nodes with the highest total resource priority in case we don't
	- have the majority of the nodes in our cluster partition, so that
	- the more significant nodes potentially win any fencing match,
	- which is especially meaningful under split-brain of 2-node
	- cluster. A promoted resource instance takes the base priority + 1
	- on calculation if the base priority is not 0. Any static/random
	- delays that are introduced by `pcmk_delay_base/max` configured
	- for the corresponding fencing resources will be added to this
	- delay. This delay should be significantly greater than, safely
	- twice, the maximum `pcmk_delay_base/max`. By default, priority
	- fencing delay is disabled. '(since 2.0.4)'
	-
	- \| cluster-delay \| 60s \|
	- indexterm:[cluster-delay,Cluster Option]
	- indexterm:[Cluster,Option,cluster-delay]
	- Estimated maximum round-trip delay over the network (excluding action
	- execution). If the DC requires an action to be executed on another
	- node, it will consider the action failed if it does not get a response
	- from the other node in this time (after considering the action's
	- own timeout). The "correct" value will depend on the speed and load of your
	- network and cluster nodes.
	-
	- \| dc-deadtime \| 20s \|
	- indexterm:[dc-deadtime,Cluster Option]
	- indexterm:[Cluster,Option,dc-deadtime]
	- How long to wait for a response from other nodes during startup.
	-
	- The "correct" value will depend on the speed/load of your network and the type of switches used.
	-
	- \| cluster-ipc-limit \| 500 \|
	- indexterm:[cluster-ipc-limit,Cluster Option]
	- indexterm:[Cluster,Option,cluster-ipc-limit]
	- The maximum IPC message backlog before one cluster daemon will disconnect
	- another. This is of use in large clusters, for which a good value is the number
	- of resources in the cluster multiplied by the number of nodes. The default of
	- 500 is also the minimum. Raise this if you see "Evicting client" messages for
	- cluster daemon PIDs in the logs.
	-
	- \| pe-error-series-max \| -1 \|
	- indexterm:[pe-error-series-max,Cluster Option]
	- indexterm:[Cluster,Option,pe-error-series-max]
	- The number of PE inputs resulting in ERRORs to save. Used when reporting problems.
	- A value of -1 means unlimited (report all).
	-
	- \| pe-warn-series-max \| -1 \|
	- indexterm:[pe-warn-series-max,Cluster Option]
	- indexterm:[Cluster,Option,pe-warn-series-max]
	- The number of PE inputs resulting in WARNINGs to save. Used when reporting problems.
	- A value of -1 means unlimited (report all).
	-
	- \| pe-input-series-max \| -1 \|
	- indexterm:[pe-input-series-max,Cluster Option]
	- indexterm:[Cluster,Option,pe-input-series-max]
	- The number of "normal" PE inputs to save. Used when reporting problems.
	- A value of -1 means unlimited (report all).
	-
	- \| placement-strategy \| default \|
	- indexterm:[placement-strategy,Cluster Option]
	- indexterm:[Cluster,Option,placement-strategy]
	- How the cluster should allocate resources to nodes (see <<s-utilization>>).
	- Allowed values are +default+, +utilization+, +balanced+, and +minimal+.
	-
	- \| node-health-strategy \| none \|
	- indexterm:[node-health-strategy,Cluster Option]
	- indexterm:[Cluster,Option,node-health-strategy]
	- How the cluster should react to node health attributes (see <<s-node-health>>).
	- Allowed values are +none+, +migrate-on-red+, +only-green+, +progressive+, and
	- +custom+.
	-
	- \| enable-acl \| FALSE \|
	- indexterm:[enable-acl,Cluster Option]
	- indexterm:[Cluster,Option,enable-acl]
	- Whether access control lists (ACLs) (see <<ch-acls>>) can be used to authorize
	- modifications to the CIB.
	-
	- \| node-health-base \| 0 \|
	- indexterm:[node-health-base,Cluster Option]
	- indexterm:[Cluster,Option,node-health-base]
	- The base health score assigned to a node. Only used when
	- +node-health-strategy+ is +progressive+.
	-
	- \| node-health-green \| 0 \|
	- indexterm:[node-health-green,Cluster Option]
	- indexterm:[Cluster,Option,node-health-green]
	- The score to use for a node health attribute whose value is +green+.
	- Only used when +node-health-strategy+ is +progressive+ or +custom+.
	-
	- \| node-health-yellow \| 0 \|
	- indexterm:[node-health-yellow,Cluster Option]
	- indexterm:[Cluster,Option,node-health-yellow]
	- The score to use for a node health attribute whose value is +yellow+.
	- Only used when +node-health-strategy+ is +progressive+ or +custom+.
	-
	- \| node-health-red \| 0 \|
	- indexterm:[node-health-red,Cluster Option]
	- indexterm:[Cluster,Option,node-health-red]
	- The score to use for a node health attribute whose value is +red+.
	- Only used when +node-health-strategy+ is +progressive+ or +custom+.
	-
	- \| cluster-recheck-interval \| 15min \|
	- indexterm:[cluster-recheck-interval,Cluster Option]
	- indexterm:[Cluster,Option,cluster-recheck-interval]
	- Pacemaker is primarily event-driven, and looks ahead to know when to recheck
	- the cluster for failure timeouts and most time-based rules. However, it will
	- also recheck the cluster after this amount of inactivity. This has two goals:
	- rules with +date_spec+ are only guaranteed to be checked this often, and it
	- also serves as a fail-safe for certain classes of scheduler bugs. A value of 0
	- disables this polling; positive values are a time interval.
	-
	- \| shutdown-lock \| false \|
	- The default of false allows active resources to be recovered elsewhere when
	- their node is cleanly shut down, which is what the vast majority of users will
	- want. However, some users prefer to make resources highly available only for
	- failures, with no recovery for clean shutdowns. If this option is true,
	- resources active on a node when it is cleanly shut down are kept "locked" to
	- that node (not allowed to run elsewhere) until they start again on that node
	- after it rejoins (or for at most shutdown-lock-limit, if set). Stonith
	- resources and Pacemaker Remote connections are never locked. Clone and bundle
	- instances and the master role of promotable clones are currently never locked,
	- though support could be added in a future release. Locks may be manually
	- cleared using the `--refresh` option of `crm_resource` (both the resource and
	- node must be specified; this works with remote nodes if their connection
	- resource's target-role is set to Stopped, but not if Pacemaker Remote is
	- stopped on the remote node without disabling the connection resource).
	- '(since 2.0.4)'
	- indexterm:[shutdown-lock,Cluster Option]
	- indexterm:[Cluster,Option,shutdown-lock]
	-
	- \| shutdown-lock-limit \| 0 \|
	- If shutdown-lock is true, and this is set to a nonzero time duration, locked
	- resources will be allowed to start after this much time has passed since the
	- node shutdown was initiated, even if the node has not rejoined. (This works
	- with remote nodes only if their connection resource's target-role is set to
	- Stopped.) '(since 2.0.4)'
	- indexterm:[shutdown-lock-limit,Cluster Option]
	- indexterm:[Cluster,Option,shutdown-lock-limit]
	-
	- \| remove-after-stop \| FALSE \|
	- indexterm:[remove-after-stop,Cluster Option]
	- indexterm:[Cluster,Option,remove-after-stop]
	- _Advanced Use Only:_ Should the cluster remove resources from the LRM after
	- they are stopped? Values other than the default are, at best, poorly tested and
	- potentially dangerous.
	-
	- \| startup-fencing \| TRUE \|
	- indexterm:[startup-fencing,Cluster Option]
	- indexterm:[Cluster,Option,startup-fencing]
	- _Advanced Use Only:_ Should the cluster shoot unseen nodes?
	- Not using the default is very unsafe!
	-
	- \| election-timeout \| 2min \|
	- indexterm:[election-timeout,Cluster Option]
	- indexterm:[Cluster,Option,election-timeout]
	- _Advanced Use Only:_ If you need to adjust this value, it probably indicates
	- the presence of a bug.
	-
	- \| shutdown-escalation \| 20min \|
	- indexterm:[shutdown-escalation,Cluster Option]
	- indexterm:[Cluster,Option,shutdown-escalation]
	- _Advanced Use Only:_ If you need to adjust this value, it probably indicates
	- the presence of a bug.
	-
	- \| join-integration-timeout \| 3min \|
	- indexterm:[join-integration-timeout,Cluster Option]
	- indexterm:[Cluster,Option,join-integration-timeout]
	- _Advanced Use Only:_ If you need to adjust this value, it probably indicates
	- the presence of a bug.
	-
	- \| join-finalization-timeout \| 30min \|
	- indexterm:[join-finalization-timeout,Cluster Option]
	- indexterm:[Cluster,Option,join-finalization-timeout]
	- _Advanced Use Only:_ If you need to adjust this value, it probably indicates
	- the presence of a bug.
	-
	- \| transition-delay \| 0s \|
	- indexterm:[transition-delay,Cluster Option]
	- indexterm:[Cluster,Option,transition-delay]
	- _Advanced Use Only:_ Delay cluster recovery for the configured interval to
	- allow for additional/related events to occur. Useful if your configuration is
	- sensitive to the order in which ping updates arrive.
	- Enabling this option will slow down cluster recovery under
	- all conditions.
	-
	- \|=========================================================
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| Option \| Default \| Description \|
	+ +===========================+=========+====================================================+
	+ \| cluster-name \| \| .. index:: \|
	+ \| \| \| pair: cluster option; cluster-name \|
	+ \| \| \| \|
	+ \| \| \| An (optional) name for the cluster as a whole. \|
	+ \| \| \| This is mostly for users' convenience for use \|
	+ \| \| \| as desired in administration, but this can be \|
	+ \| \| \| used in the Pacemaker configuration in \|
	+ \| \| \| :ref:`rules` (as the ``#cluster-name`` \|
	+ \| \| \| :ref:`node attribute \|
	+ \| \| \| <node-attribute-expressions-special>`. It may \|
	+ \| \| \| also be used by higher-level tools when \|
	+ \| \| \| displaying cluster information, and by \|
	+ \| \| \| certain resource agents (for example, the \|
	+ \| \| \| ``ocf:heartbeat:GFS2`` agent stores the \|
	+ \| \| \| cluster name in filesystem meta-data). \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| dc-version \| \| .. index:: \|
	+ \| \| \| pair: cluster option; dc-version \|
	+ \| \| \| \|
	+ \| \| \| Version of Pacemaker on the cluster's DC. \|
	+ \| \| \| Determined automatically by the cluster. Often \|
	+ \| \| \| includes the hash which identifies the exact \|
	+ \| \| \| Git changeset it was built from. Used for \|
	+ \| \| \| diagnostic purposes. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| cluster-infrastructure \| \| .. index:: \|
	+ \| \| \| pair: cluster option; cluster-infrastructure \|
	+ \| \| \| \|
	+ \| \| \| The messaging stack on which Pacemaker is \|
	+ \| \| \| currently running. Determined automatically by \|
	+ \| \| \| the cluster. Used for informational and \|
	+ \| \| \| diagnostic purposes. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| no-quorum-policy \| stop \| .. index:: \|
	+ \| \| \| pair: cluster option; no-quorum-policy \|
	+ \| \| \| \|
	+ \| \| \| What to do when the cluster does not have \|
	+ \| \| \| quorum. Allowed values: \|
	+ \| \| \| \|
	+ \| \| \| * ``ignore:`` continue all resource management \|
	+ \| \| \| * ``freeze:`` continue resource management, but \|
	+ \| \| \| don't recover resources from nodes not in the \|
	+ \| \| \| affected partition \|
	+ \| \| \| * ``stop:`` stop all resources in the affected \|
	+ \| \| \| cluster partition \|
	+ \| \| \| * ``demote:`` demote promotable resources and \|
	+ \| \| \| stop all other resources in the affected \|
	+ \| \| \| cluster partition \|
	+ \| \| \| * ``suicide:`` fence all nodes in the affected \|
	+ \| \| \| cluster partition \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| batch-limit \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; batch-limit \|
	+ \| \| \| \|
	+ \| \| \| The maximum number of actions that the cluster \|
	+ \| \| \| may execute in parallel across all nodes. The \|
	+ \| \| \| "correct" value will depend on the speed and \|
	+ \| \| \| load of your network and cluster nodes. If zero, \|
	+ \| \| \| the cluster will impose a dynamically calculated \|
	+ \| \| \| limit only when any node has high load. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| migration-limit \| -1 \| .. index:: \|
	+ \| \| \| pair: cluster option; migration-limit \|
	+ \| \| \| \|
	+ \| \| \| The number of \|
	+ \| \| \| :ref:`live migration <live-migration>` actions \|
	+ \| \| \| that the cluster is allowed to execute in \|
	+ \| \| \| parallel on a node. A value of -1 means \|
	+ \| \| \| unlimited. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| symmetric-cluster \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; symmetric-cluster \|
	+ \| \| \| \|
	+ \| \| \| Whether resources can run on any node by default \|
	+ \| \| \| (if false, a resource is allowed to run on a \|
	+ \| \| \| node only if a \|
	+ \| \| \| :ref:`location constraint <location-constraint>` \|
	+ \| \| \| enables it) \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stop-all-resources \| false \| .. index:: \|
	+ \| \| \| pair: cluster option; stop-all-resources \|
	+ \| \| \| \|
	+ \| \| \| Whether all resources should be disallowed from \|
	+ \| \| \| running (can be useful during maintenance) \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stop-orphan-resources \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; stop-orphan-resources \|
	+ \| \| \| \|
	+ \| \| \| Whether resources that have been deleted from \|
	+ \| \| \| the configuration should be stopped. This value \|
	+ \| \| \| takes precedence over ``is-managed`` (that is, \|
	+ \| \| \| even unmanaged resources will be stopped when \|
	+ \| \| \| orphaned if this value is ``true`` \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stop-orphan-actions \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; stop-orphan-actions \|
	+ \| \| \| \|
	+ \| \| \| Whether recurring :ref:`operations <operation>` \|
	+ \| \| \| that have been deleted from the configuration \|
	+ \| \| \| should be cancelled \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| start-failure-is-fatal \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; start-failure-is-fatal \|
	+ \| \| \| \|
	+ \| \| \| Whether a failure to start a resource on a \|
	+ \| \| \| particular node prevents further start attempts \|
	+ \| \| \| on that node? If ``false``, the cluster will \|
	+ \| \| \| decide whether the node is still eligible based \|
	+ \| \| \| on the resource's current failure count and \|
	+ \| \| \| :ref:`migration-threshold <failure-handling>`. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| enable-startup-probes \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; enable-startup-probes \|
	+ \| \| \| \|
	+ \| \| \| Whether the cluster should check the \|
	+ \| \| \| pre-existing state of resources when the cluster \|
	+ \| \| \| starts \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| maintenance-mode \| false \| .. index:: \|
	+ \| \| \| pair: cluster option; maintenance-mode \|
	+ \| \| \| \|
	+ \| \| \| Whether the cluster should refrain from \|
	+ \| \| \| monitoring, starting and stopping resources \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stonith-enabled \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; stonith-enabled \|
	+ \| \| \| \|
	+ \| \| \| Whether the cluster is allowed to fence nodes \|
	+ \| \| \| (for example, failed nodes and nodes with \|
	+ \| \| \| resources that can't be stopped. \|
	+ \| \| \| \|
	+ \| \| \| If true, at least one fence device must be \|
	+ \| \| \| configured before resources are allowed to run. \|
	+ \| \| \| \|
	+ \| \| \| If false, unresponsive nodes are immediately \|
	+ \| \| \| assumed to be running no resources, and resource \|
	+ \| \| \| recovery on online nodes starts without any \|
	+ \| \| \| further protection (which can mean data loss \|
	+ \| \| \| if the unresponsive node still accesses shared \|
	+ \| \| \| storage, for example). See also the \|
	+ \| \| \| :ref:`requires <requires>` resource \|
	+ \| \| \| meta-attribute. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stonith-action \| reboot \| .. index:: \|
	+ \| \| \| pair: cluster option; stonith-action \|
	+ \| \| \| \|
	+ \| \| \| Action the cluster should send to the fence agent \|
	+ \| \| \| when a node must be fenced. Allowed values are \|
	+ \| \| \| ``reboot``, ``off``, and (for legacy agents only) \|
	+ \| \| \| ``poweroff``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stonith-timeout \| 60s \| .. index:: \|
	+ \| \| \| pair: cluster option; stonith-timeout \|
	+ \| \| \| \|
	+ \| \| \| How long to wait for ``on``, ``off``, and \|
	+ \| \| \| ``reboot`` fence actions to complete by default. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stonith-max-attempts \| 10 \| .. index:: \|
	+ \| \| \| pair: cluster option; stonith-max-attempts \|
	+ \| \| \| \|
	+ \| \| \| How many times fencing can fail for a target \|
	+ \| \| \| before the cluster will no longer immediately \|
	+ \| \| \| re-attempt it. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| stonith-watchdog-timeout \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; stonith-watchdog-timeout \|
	+ \| \| \| \|
	+ \| \| \| If nonzero, and the cluster detects \|
	+ \| \| \| ``have-watchdog`` as ``true``, then watchdog-based \|
	+ \| \| \| self-fencing will be performed via SBD when \|
	+ \| \| \| fencing is required, without requiring a fencing \|
	+ \| \| \| resource explicitly configured. \|
	+ \| \| \| \|
	+ \| \| \| If this is set to a positive value, unseen nodes \|
	+ \| \| \| are assumed to self-fence within this much time. \|
	+ \| \| \| \|
	+ \| \| \| .. warning:: \|
	+ \| \| \| It must be ensured that this value is larger \|
	+ \| \| \| than the ``SBD_WATCHDOG_TIMEOUT`` environment \|
	+ \| \| \| variable on all nodes. Pacemaker verifies the \|
	+ \| \| \| settings individually on all nodes and prevents \|
	+ \| \| \| startup or shuts down if configured wrongly on \|
	+ \| \| \| the fly. It is strongly recommended that \|
	+ \| \| \| ``SBD_WATCHDOG_TIMEOUT`` be set to the same \|
	+ \| \| \| value on all nodes. \|
	+ \| \| \| \|
	+ \| \| \| If this is set to a negative value, and \|
	+ \| \| \| ``SBD_WATCHDOG_TIMEOUT`` is set, twice that value \|
	+ \| \| \| will be used. \|
	+ \| \| \| \|
	+ \| \| \| .. warning:: \|
	+ \| \| \| In this case, it is essential (and currently \|
	+ \| \| \| not verified by pacemaker) that \|
	+ \| \| \| ``SBD_WATCHDOG_TIMEOUT`` is set to the same \|
	+ \| \| \| value on all nodes. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| concurrent-fencing \| false \| .. index:: \|
	+ \| \| \| pair: cluster option; concurrent-fencing \|
	+ \| \| \| \|
	+ \| \| \| Whether the cluster is allowed to initiate multiple\|
	+ \| \| \| fence actions concurrently \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| fence-reaction \| stop \| .. index:: \|
	+ \| \| \| pair: cluster option; fence-reaction \|
	+ \| \| \| \|
	+ \| \| \| How should a cluster node react if notified of its \|
	+ \| \| \| own fencing? A cluster node may receive \|
	+ \| \| \| notification of its own fencing if fencing is \|
	+ \| \| \| misconfigured, or if fabric fencing is in use that \|
	+ \| \| \| doesn't cut cluster communication. Allowed values \|
	+ \| \| \| are ``stop`` to attempt to immediately stop \|
	+ \| \| \| pacemaker and stay stopped, or ``panic`` to \|
	+ \| \| \| attempt to immediately reboot the local node, \|
	+ \| \| \| falling back to stop on failure. The default is \|
	+ \| \| \| likely to be changed to ``panic`` in a future \|
	+ \| \| \| release. (since 2.0.3) \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| priority-fencing-delay \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; priority-fencing-delay \|
	+ \| \| \| \|
	+ \| \| \| Apply this delay to any fencing targeting the lost \|
	+ \| \| \| nodes with the highest total resource priority in \|
	+ \| \| \| case we don't have the majority of the nodes in \|
	+ \| \| \| our cluster partition, so that the more \|
	+ \| \| \| significant nodes potentially win any fencing \|
	+ \| \| \| match (especially meaningful in a split-brain of a \|
	+ \| \| \| 2-node cluster). A promoted resource instance \|
	+ \| \| \| takes the resource's priority plus 1 if the \|
	+ \| \| \| resource's priority is not 0. Any static or random \|
	+ \| \| \| delays introduced by ``pcmk_delay_base`` and \|
	+ \| \| \| ``pcmk_delay_max`` configured for the \|
	+ \| \| \| corresponding fencing resources will be added to \|
	+ \| \| \| this delay. This delay should be significantly \|
	+ \| \| \| greater than (safely twice) the maximum delay from \|
	+ \| \| \| those parameters. (since 2.0.4) \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| cluster-delay \| 60s \| .. index:: \|
	+ \| \| \| pair: cluster option; cluster-delay \|
	+ \| \| \| \|
	+ \| \| \| Estimated maximum round-trip delay over the \|
	+ \| \| \| network (excluding action execution). If the DC \|
	+ \| \| \| requires an action to be executed on another node, \|
	+ \| \| \| it will consider the action failed if it does not \|
	+ \| \| \| get a response from the other node in this time \|
	+ \| \| \| (after considering the action's own timeout). The \|
	+ \| \| \| "correct" value will depend on the speed and load \|
	+ \| \| \| of your network and cluster nodes. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| dc-deadtime \| 20s \| .. index:: \|
	+ \| \| \| pair: cluster option; dc-deadtime \|
	+ \| \| \| \|
	+ \| \| \| How long to wait for a response from other nodes \|
	+ \| \| \| during startup. The "correct" value will depend on \|
	+ \| \| \| the speed/load of your network and the type of \|
	+ \| \| \| switches used. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| cluster-ipc-limit \| 500 \| .. index:: \|
	+ \| \| \| pair: cluster option; cluster-ipc-limit \|
	+ \| \| \| \|
	+ \| \| \| The maximum IPC message backlog before one cluster \|
	+ \| \| \| daemon will disconnect another. This is of use in \|
	+ \| \| \| large clusters, for which a good value is the \|
	+ \| \| \| number of resources in the cluster multiplied by \|
	+ \| \| \| the number of nodes. The default of 500 is also \|
	+ \| \| \| the minimum. Raise this if you see \|
	+ \| \| \| "Evicting client" messages for cluster daemon PIDs \|
	+ \| \| \| in the logs. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| pe-error-series-max \| -1 \| .. index:: \|
	+ \| \| \| pair: cluster option; pe-error-series-max \|
	+ \| \| \| \|
	+ \| \| \| The number of scheduler inputs resulting in errors \|
	+ \| \| \| to save. Used when reporting problems. A value of \|
	+ \| \| \| -1 means unlimited (report all). \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| pe-warn-series-max \| -1 \| .. index:: \|
	+ \| \| \| pair: cluster option; pe-warn-series-max \|
	+ \| \| \| \|
	+ \| \| \| The number of scheduler inputs resulting in \|
	+ \| \| \| warnings to save. Used when reporting problems. A \|
	+ \| \| \| value of -1 means unlimited (report all). \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| pe-input-series-max \| -1 \| .. index:: \|
	+ \| \| \| pair: cluster option; pe-input-series-max \|
	+ \| \| \| \|
	+ \| \| \| The number of "normal" scheduler inputs to save. \|
	+ \| \| \| Used when reporting problems. A value of -1 means \|
	+ \| \| \| unlimited (report all). \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| enable-acl \| false \| .. index:: \|
	+ \| \| \| pair: cluster option; enable-acl \|
	+ \| \| \| \|
	+ \| \| \| Whether :ref:`acl` should be used to authorize \|
	+ \| \| \| modifications to the CIB \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| placement-strategy \| default \| .. index:: \|
	+ \| \| \| pair: cluster option; placement-strategy \|
	+ \| \| \| \|
	+ \| \| \| How the cluster should allocate resources to nodes \|
	+ \| \| \| (see :ref:`utilization`). Allowed values are \|
	+ \| \| \| ``default``, ``utilization``, ``balanced``, and \|
	+ \| \| \| ``minimal``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| node-health-strategy \| none \| .. index:: \|
	+ \| \| \| pair: cluster option; node-health-strategy \|
	+ \| \| \| \|
	+ \| \| \| How the cluster should react to node health \|
	+ \| \| \| attributes (see :ref:`node-health`). Allowed values\|
	+ \| \| \| are ``none``, ``migrate-on-red``, ``only-green``, \|
	+ \| \| \| ``progressive``, and ``custom``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| node-health-base \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; node-health-base \|
	+ \| \| \| \|
	+ \| \| \| The base health score assigned to a node. Only \|
	+ \| \| \| used when ``node-health-strategy`` is \|
	+ \| \| \| ``progressive``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| node-health-green \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; node-health-green \|
	+ \| \| \| \|
	+ \| \| \| The score to use for a node health attribute whose \|
	+ \| \| \| value is ``green``. Only used when \|
	+ \| \| \| ``node-health-strategy`` is ``progressive`` or \|
	+ \| \| \| ``custom``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| node-health-yellow \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; node-health-yellow \|
	+ \| \| \| \|
	+ \| \| \| The score to use for a node health attribute whose \|
	+ \| \| \| value is ``yellow``. Only used when \|
	+ \| \| \| ``node-health-strategy`` is ``progressive`` or \|
	+ \| \| \| ``custom``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| node-health-red \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; node-health-red \|
	+ \| \| \| \|
	+ \| \| \| The score to use for a node health attribute whose \|
	+ \| \| \| value is ``red``. Only used when \|
	+ \| \| \| ``node-health-strategy`` is ``progressive`` or \|
	+ \| \| \| ``custom``. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| cluster-recheck-interval \| 15min \| .. index:: \|
	+ \| \| \| pair: cluster option; cluster-recheck-interval \|
	+ \| \| \| \|
	+ \| \| \| Pacemaker is primarily event-driven, and looks \|
	+ \| \| \| ahead to know when to recheck the cluster for \|
	+ \| \| \| failure timeouts and most time-based rules. \|
	+ \| \| \| However, it will also recheck the cluster after \|
	+ \| \| \| this amount of inactivity. This has two goals: \|
	+ \| \| \| rules with ``date_spec`` are only guaranteed to be \|
	+ \| \| \| checked this often, and it also serves as a \|
	+ \| \| \| fail-safe for certain classes of scheduler bugs. A \|
	+ \| \| \| value of 0 disables this polling; positive values \|
	+ \| \| \| are a time interval. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| shutdown-lock \| false \| .. index:: \|
	+ \| \| \| pair: cluster option; shutdown-lock \|
	+ \| \| \| \|
	+ \| \| \| The default of false allows active resources to be \|
	+ \| \| \| recovered elsewhere when their node is cleanly \|
	+ \| \| \| shut down, which is what the vast majority of \|
	+ \| \| \| users will want. However, some users prefer to \|
	+ \| \| \| make resources highly available only for failures, \|
	+ \| \| \| with no recovery for clean shutdowns. If this \|
	+ \| \| \| option is true, resources active on a node when it \|
	+ \| \| \| is cleanly shut down are kept "locked" to that \|
	+ \| \| \| node (not allowed to run elsewhere) until they \|
	+ \| \| \| start again on that node after it rejoins (or for \|
	+ \| \| \| at most ``shutdown-lock-limit``, if set). Stonith \|
	+ \| \| \| resources and Pacemaker Remote connections are \|
	+ \| \| \| never locked. Clone and bundle instances and the \|
	+ \| \| \| master role of promotable clones are currently \|
	+ \| \| \| never locked, though support could be added in a \|
	+ \| \| \| future release. Locks may be manually cleared \|
	+ \| \| \| using the ``--refresh`` option of ``crm_resource`` \|
	+ \| \| \| (both the resource and node must be specified; \|
	+ \| \| \| this works with remote nodes if their connection \|
	+ \| \| \| resource's ``target-role`` is set to ``Stopped``, \|
	+ \| \| \| but not if Pacemaker Remote is stopped on the \|
	+ \| \| \| remote node without disabling the connection \|
	+ \| \| \| resource). (since 2.0.4) \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| shutdown-lock-limit \| 0 \| .. index:: \|
	+ \| \| \| pair: cluster option; shutdown-lock-limit \|
	+ \| \| \| \|
	+ \| \| \| If ``shutdown-lock`` is true, and this is set to a \|
	+ \| \| \| nonzero time duration, locked resources will be \|
	+ \| \| \| allowed to start after this much time has passed \|
	+ \| \| \| since the node shutdown was initiated, even if the \|
	+ \| \| \| node has not rejoined. (This works with remote \|
	+ \| \| \| nodes only if their connection resource's \|
	+ \| \| \| ``target-role`` is set to ``Stopped``.) \|
	+ \| \| \| (since 2.0.4) \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| remove-after-stop \| false \| .. index:: \|
	+ \| \| \| pair: cluster option; remove-after-stop \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: Should the cluster remove \|
	+ \| \| \| resources from Pacemaker's executor after they are \|
	+ \| \| \| stopped? Values other than the default are, at \|
	+ \| \| \| best, poorly tested and potentially dangerous. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| startup-fencing \| true \| .. index:: \|
	+ \| \| \| pair: cluster option; startup-fencing \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: Should the cluster fence \|
	+ \| \| \| unseen nodes at start-up? Setting this to false is \|
	+ \| \| \| unsafe, because the unseen nodes could be active \|
	+ \| \| \| and running resources but unreachable. \|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| election-timeout \| 2min \| .. index:: \|
	+ \| \| \| pair: cluster option; election-timeout \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: If you need to adjust this \|
	+ \| \| \| value, it probably indicates the presence of a bug.\|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| shutdown-escalation \| 20min \| .. index:: \|
	+ \| \| \| pair: cluster option; shutdown-escalation \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: If you need to adjust this \|
	+ \| \| \| value, it probably indicates the presence of a bug.\|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| join-integration-timeout \| 3min \| .. index:: \|
	+ \| \| \| pair: cluster option; join-integration-timeout \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: If you need to adjust this \|
	+ \| \| \| value, it probably indicates the presence of a bug.\|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| join-finalization-timeout \| 30min \| .. index:: \|
	+ \| \| \| pair: cluster option; join-finalization-timeout \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: If you need to adjust this \|
	+ \| \| \| value, it probably indicates the presence of a bug.\|
	+ +---------------------------+---------+----------------------------------------------------+
	+ \| transition-delay \| 0s \| .. index:: \|
	+ \| \| \| pair: cluster option; transition-delay \|
	+ \| \| \| \|
	+ \| \| \| Advanced Use Only: Delay cluster recovery for \|
	+ \| \| \| the configured interval to allow for additional or \|
	+ \| \| \| related events to occur. This can be useful if \|
	+ \| \| \| your configuration is sensitive to the order in \|
	+ \| \| \| which ping updates arrive. Enabling this option \|
	+ \| \| \| will slow down cluster recovery under all \|
	+ \| \| \| conditions. \|
	+ +---------------------------+---------+----------------------------------------------------+

File Metadata

Mime Type: text/x-diff
Expires: Sat, Nov 23, 10:02 AM (1 d, 13 h)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 1018548
Default Alt Text: (74 KB)

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions