Page MenuHomeClusterLabs Projects
Files F3871623

fence_raritan_px3.xml
No OneTemporary
Actions

fence_raritan_px3.xml
View Options

<?xml version="1.0" ?>
<resource-agent name="fence_raritan_px3" shortdesc="Power Fencing agent for Raritan Dominion PX2 and PX3" >
<longdesc>fence_raritan_px3 is a Power Fencing agent which can be used with the Raritan PX2 and PX3 Power Distribution Unit series. It logs into device via telnet or ssh and reboots a specified outlet. Single outlets and grouped outlets are supported. The fence is tested on this model: PX3-5466V. There have been issues seen with the telnet prompt on 3.4.x and 3.5.x Raritan firmware versions. It's recommended to update to at least version 3.6.x</longdesc>
<vendor-url>http://www.raritan.com/</vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
<getopt mixed="-o, --action=[action]" />
<content type="string" default="reboot" />
<shortdesc lang="en">Fencing action</shortdesc>
</parameter>
<parameter name="cmd_prompt" unique="0" required="0" deprecated="1">
<getopt mixed="-c, --command-prompt=[prompt]" />
<content type="string" default=".*\[My PDU\] #" />
<shortdesc lang="en">Force Python regex for command prompt</shortdesc>
</parameter>
<parameter name="command_prompt" unique="0" required="0" obsoletes="cmd_prompt">
<getopt mixed="-c, --command-prompt=[prompt]" />
<content type="string" default=".*\[My PDU\] #" />
<shortdesc lang="en">Force Python regex for command prompt</shortdesc>
</parameter>
<parameter name="identity_file" unique="0" required="0">
<getopt mixed="-k, --identity-file=[filename]" />
<shortdesc lang="en">Identity file (private key) for SSH</shortdesc>
</parameter>
<parameter name="inet4_only" unique="0" required="0">
<getopt mixed="-4, --inet4-only" />
<content type="boolean" />
<shortdesc lang="en">Forces agent to use IPv4 addresses only</shortdesc>
</parameter>
<parameter name="inet6_only" unique="0" required="0">
<getopt mixed="-6, --inet6-only" />
<content type="boolean" />
<shortdesc lang="en">Forces agent to use IPv6 addresses only</shortdesc>
</parameter>
<parameter name="ip" unique="0" required="1" obsoletes="ipaddr">
<getopt mixed="-a, --ip=[ip]" />
<content type="string" />
<shortdesc lang="en">IP address or hostname of fencing device</shortdesc>
</parameter>
<parameter name="ipaddr" unique="0" required="1" deprecated="1">
<getopt mixed="-a, --ip=[ip]" />
<content type="string" />
<shortdesc lang="en">IP address or hostname of fencing device</shortdesc>
</parameter>
<parameter name="ipport" unique="0" required="0">
<getopt mixed="-u, --ipport=[port]" />
<content type="integer" default="23" />
<shortdesc lang="en">TCP/UDP port to use for connection with device</shortdesc>
</parameter>
<parameter name="login" unique="0" required="1" deprecated="1">
<getopt mixed="-l, --username=[name]" />
<content type="string" />
<shortdesc lang="en">Login name</shortdesc>
</parameter>
<parameter name="passwd" unique="0" required="0" deprecated="1">
<getopt mixed="-p, --password=[password]" />
<content type="string" />
<shortdesc lang="en">Login password or passphrase</shortdesc>
</parameter>
<parameter name="passwd_script" unique="0" required="0" deprecated="1">
<getopt mixed="-S, --password-script=[script]" />
<content type="string" />
<shortdesc lang="en">Script to run to retrieve password</shortdesc>
</parameter>
<parameter name="password" unique="0" required="0" obsoletes="passwd">
<getopt mixed="-p, --password=[password]" />
<content type="string" />
<shortdesc lang="en">Login password or passphrase</shortdesc>
</parameter>
<parameter name="password_script" unique="0" required="0" obsoletes="passwd_script">
<getopt mixed="-S, --password-script=[script]" />
<content type="string" />
<shortdesc lang="en">Script to run to retrieve password</shortdesc>
</parameter>
<parameter name="plug" unique="0" required="1" obsoletes="port">
<getopt mixed="-n, --plug=[id]" />
<content type="string" />
<shortdesc lang="en">Physical plug number on device, UUID or identification of machine</shortdesc>
</parameter>
<parameter name="port" unique="0" required="1" deprecated="1">
<getopt mixed="-n, --plug=[id]" />
<content type="string" />
<shortdesc lang="en">Physical plug number on device, UUID or identification of machine</shortdesc>
</parameter>
<parameter name="secure" unique="0" required="0" deprecated="1">
<getopt mixed="-x, --ssh" />
<content type="boolean" />
<shortdesc lang="en">Use SSH connection</shortdesc>
</parameter>
<parameter name="ssh" unique="0" required="0" obsoletes="secure">
<getopt mixed="-x, --ssh" />
<content type="boolean" />
<shortdesc lang="en">Use SSH connection</shortdesc>
</parameter>
<parameter name="ssh_options" unique="0" required="0">
<getopt mixed="--ssh-options=[options]" />
<content type="string" />
<shortdesc lang="en">SSH options to use</shortdesc>
</parameter>
<parameter name="username" unique="0" required="1" obsoletes="login">
<getopt mixed="-l, --username=[name]" />
<content type="string" />
<shortdesc lang="en">Login name</shortdesc>
</parameter>
<parameter name="quiet" unique="0" required="0">
<getopt mixed="-q, --quiet" />
<content type="boolean" />
<shortdesc lang="en">Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.</shortdesc>
</parameter>
<parameter name="verbose" unique="0" required="0">
<getopt mixed="-v, --verbose" />
<content type="boolean" />
<shortdesc lang="en">Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.</shortdesc>
</parameter>
<parameter name="verbose_level" unique="0" required="0">
<getopt mixed="--verbose-level" />
<content type="integer" />
<shortdesc lang="en">Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).</shortdesc>
</parameter>
<parameter name="debug" unique="0" required="0" deprecated="1">
<getopt mixed="-D, --debug-file=[debugfile]" />
<content type="string" />
<shortdesc lang="en">Write debug information to given file</shortdesc>
</parameter>
<parameter name="debug_file" unique="0" required="0" obsoletes="debug">
<getopt mixed="-D, --debug-file=[debugfile]" />
<shortdesc lang="en">Write debug information to given file</shortdesc>
</parameter>
<parameter name="version" unique="0" required="0">
<getopt mixed="-V, --version" />
<content type="boolean" />
<shortdesc lang="en">Display version information and exit</shortdesc>
</parameter>
<parameter name="help" unique="0" required="0">
<getopt mixed="-h, --help" />
<content type="boolean" />
<shortdesc lang="en">Display help and exit</shortdesc>
</parameter>
<parameter name="plug_separator" unique="0" required="0">
<getopt mixed="--plug-separator=[char]" />
<content type="string" default="," />
<shortdesc lang="en">Separator for plug parameter when specifying more than 1 plug</shortdesc>
</parameter>
<parameter name="separator" unique="0" required="0">
<getopt mixed="-C, --separator=[char]" />
<content type="string" default="," />
<shortdesc lang="en">Separator for CSV created by 'list' operation</shortdesc>
</parameter>
<parameter name="delay" unique="0" required="0">
<getopt mixed="--delay=[seconds]" />
<content type="second" default="0" />
<shortdesc lang="en">Wait X seconds before fencing is started</shortdesc>
</parameter>
<parameter name="disable_timeout" unique="0" required="0">
<getopt mixed="--disable-timeout=[true/false]" />
<content type="string" />
<shortdesc lang="en">Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)</shortdesc>
</parameter>
<parameter name="login_timeout" unique="0" required="0">
<getopt mixed="--login-timeout=[seconds]" />
<content type="second" default="5" />
<shortdesc lang="en">Wait X seconds for cmd prompt after login</shortdesc>
</parameter>
<parameter name="power_timeout" unique="0" required="0">
<getopt mixed="--power-timeout=[seconds]" />
<content type="second" default="20" />
<shortdesc lang="en">Test X seconds for status change after ON/OFF</shortdesc>
</parameter>
<parameter name="power_wait" unique="0" required="0">
<getopt mixed="--power-wait=[seconds]" />
<content type="second" default="0" />
<shortdesc lang="en">Wait X seconds after issuing ON/OFF</shortdesc>
</parameter>
<parameter name="shell_timeout" unique="0" required="0">
<getopt mixed="--shell-timeout=[seconds]" />
<content type="second" default="8" />
<shortdesc lang="en">Wait X seconds for cmd prompt after issuing command</shortdesc>
</parameter>
<parameter name="stonith_status_sleep" unique="0" required="0">
<getopt mixed="--stonith-status-sleep=[seconds]" />
<content type="second" default="1" />
<shortdesc lang="en">Sleep X seconds between status calls during a STONITH action</shortdesc>
</parameter>
<parameter name="retry_on" unique="0" required="0">
<getopt mixed="--retry-on=[attempts]" />
<content type="integer" default="1" />
<shortdesc lang="en">Count of attempts to retry power on</shortdesc>
</parameter>
<parameter name="ssh_path" unique="0" required="0">
<getopt mixed="--ssh-path=[path]" />
<shortdesc lang="en">Path to ssh binary</shortdesc>
</parameter>
<parameter name="telnet_path" unique="0" required="0">
<getopt mixed="--telnet-path=[path]" />
<shortdesc lang="en">Path to telnet binary</shortdesc>
</parameter>
</parameters>
<actions>
<action name="on" automatic="0"/>
<action name="off" />
<action name="reboot" />
<action name="status" />
<action name="list" />
<action name="list-status" />
<action name="monitor" />
<action name="metadata" />
<action name="manpage" />
<action name="validate-all" />
</actions>
</resource-agent>

File Metadata

Mime Type
text/xml
Expires
Mon, May 12, 5:10 PM (22 h, 1 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1742607
Default Alt Text
fence_raritan_px3.xml (9 KB)

Event Timeline