diff --git a/conf/corosync.conf.example b/conf/corosync.conf.example index f8569028..456d76f9 100644 --- a/conf/corosync.conf.example +++ b/conf/corosync.conf.example @@ -1,73 +1,74 @@ # Please read the corosync.conf.5 manual page totem { version: 2 - # secauth: Enable mutual node authentication. If you choose to - # enable this ("on"), then do remember to create a shared + # cypto_cipher and crypto_hash: Used for mutual node authentication. + # If you choose to enable this, then do remember to create a shared # secret with "corosync-keygen". - secauth: off + crypto_cipher: none + crypto_hash: none # interface: define at least one interface to communicate # over. If you define more than one interface stanza, you must # also set rrp_mode. interface { # Rings must be consecutively numbered, starting at 0. ringnumber: 0 # This is normally the *network* address of the # interface to bind to. This ensures that you can use # identical instances of this configuration file # across all your cluster nodes, without having to # modify this option. bindnetaddr: 192.168.1.0 # However, if you have multiple physical network # interfaces configured for the same subnet, then the # network address alone is not sufficient to identify # the interface Corosync should bind to. In that case, # configure the *host* address of the interface # instead: # bindnetaddr: 192.168.1.1 # When selecting a multicast address, consider RFC # 2365 (which, among other things, specifies that # 239.255.x.x addresses are left to the discretion of # the network administrator). Do not reuse multicast # addresses across multiple Corosync clusters sharing # the same network. mcastaddr: 239.255.1.1 # Corosync uses the port you specify here for UDP # messaging, and also the immediately preceding # port. Thus if you set this to 5405, Corosync sends # messages over UDP ports 5405 and 5404. mcastport: 5405 # Time-to-live for cluster communication packets. The # number of hops (routers) that this ring will allow # itself to pass. Note that multicast routing must be # specifically enabled on most network routers. ttl: 1 } } logging { # Log the source file and line where messages are being # generated. When in doubt, leave off. Potentially useful for # debugging. fileline: off # Log to standard error. When in doubt, set to no. Useful when # running in the foreground (when invoking "corosync -f") to_stderr: no # Log to a log file. When set to "no", the "logfile" option # must not be set. to_logfile: yes logfile: /var/log/cluster/corosync.log # Log to the system log daemon. When in doubt, set to yes. to_syslog: yes # Log debug messages (very verbose). When in doubt, leave off. debug: off # Log messages with time stamps. When in doubt, set to on # (unless you are only logging to syslog, where double # timestamps can be annoying). timestamp: on logger_subsys { subsys: QUORUM debug: off } } diff --git a/conf/corosync.conf.example.udpu b/conf/corosync.conf.example.udpu index 72613a1b..d5be6222 100644 --- a/conf/corosync.conf.example.udpu +++ b/conf/corosync.conf.example.udpu @@ -1,74 +1,75 @@ # Please read the corosync.conf.5 manual page totem { version: 2 - secauth: off + crypto_cipher: none + crypto_hash: none interface { member { memberaddr: 10.16.35.101 } member { memberaddr: 10.16.35.102 } member { memberaddr: 10.16.35.103 } member { memberaddr: 10.16.35.104 } member { memberaddr: 10.16.35.105 } member { memberaddr: 10.16.35.106 } member { memberaddr: 10.16.35.107 } member { memberaddr: 10.16.35.108 } member { memberaddr: 10.16.35.109 } member { memberaddr: 10.16.35.110 } member { memberaddr: 10.16.35.111 } member { memberaddr: 10.16.35.112 } member { memberaddr: 10.16.35.113 } member { memberaddr: 10.16.35.114 } member { memberaddr: 10.16.35.115 } member { memberaddr: 10.16.35.116 } ringnumber: 0 bindnetaddr: 10.16.35.0 mcastport: 5405 ttl: 1 } transport: udpu } logging { fileline: off to_logfile: yes to_syslog: yes debug: on logfile: /var/log/cluster/corosync.log debug: off timestamp: on logger_subsys { subsys: QUORUM debug: off } } diff --git a/conf/corosync.xml.example b/conf/corosync.xml.example index 58d28ed0..461e6732 100644 --- a/conf/corosync.xml.example +++ b/conf/corosync.xml.example @@ -1,109 +1,109 @@ - +