diff --git a/tests/data/metadata/fence_alom.xml b/tests/data/metadata/fence_alom.xml index bdb7582a..2a69464a 100644 --- a/tests/data/metadata/fence_alom.xml +++ b/tests/data/metadata/fence_alom.xml @@ -1,141 +1,141 @@ fence_alom is an I/O Fencing agent which can be used with ALOM connected machines. http://www.sun.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary diff --git a/tests/data/metadata/fence_amt.xml b/tests/data/metadata/fence_amt.xml index f0b64c42..8844fcc7 100644 --- a/tests/data/metadata/fence_amt.xml +++ b/tests/data/metadata/fence_amt.xml @@ -1,145 +1,145 @@ fence_amt is an I/O Fencing agent which can be used with Intel AMT. This agent calls support software amttool(http://www.kraxel.org/cgit/amtterm/). http://www.intel.com/ Fencing action Change the default boot behavior of the machine. Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Verbose mode Write debug information to given file Display version information and exit Display help and exit Path to amttool binary Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_drac.xml b/tests/data/metadata/fence_drac.xml index a53223a0..42287247 100644 --- a/tests/data/metadata/fence_drac.xml +++ b/tests/data/metadata/fence_drac.xml @@ -1,126 +1,126 @@ fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to controlling power to a server. It logs into the DRAC through the telnet interface of the card. By default, the telnet interface is not enabled. To enable the interface, you will need to use the racadm command in the racser-devel rpm available from Dell. To enable telnet on the DRAC: [root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1 [root]# racadm racreset http://www.dell.com Fencing action Force Python regex for command prompt Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to telnet binary diff --git a/tests/data/metadata/fence_idrac.xml b/tests/data/metadata/fence_idrac.xml index 70bdba06..1af865b5 100644 --- a/tests/data/metadata/fence_idrac.xml +++ b/tests/data/metadata/fence_idrac.xml @@ -1,172 +1,172 @@ fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). Fencing action IPMI Lan Auth type. Ciphersuite to use (same as ipmitool -C parameter) Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Use Lanplus to improve security of connection Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Privilege level on IPMI device Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Path to ipmitool binary Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_ilo.xml b/tests/data/metadata/fence_ilo.xml index 8fde6ca4..cf080f86 100644 --- a/tests/data/metadata/fence_ilo.xml +++ b/tests/data/metadata/fence_ilo.xml @@ -1,152 +1,152 @@ fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream. http://www.hp.com Fencing action Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up. Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Force ribcl version to use Use SSL connection with verifying certificate Use SSL connection without verifying certificate Use SSL connection with verifying certificate Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up. Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to gnutls-cli binary diff --git a/tests/data/metadata/fence_ilo2.xml b/tests/data/metadata/fence_ilo2.xml index b926adbe..411f1648 100644 --- a/tests/data/metadata/fence_ilo2.xml +++ b/tests/data/metadata/fence_ilo2.xml @@ -1,152 +1,152 @@ fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream. http://www.hp.com Fencing action Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up. Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Force ribcl version to use Use SSL connection with verifying certificate Use SSL connection without verifying certificate Use SSL connection with verifying certificate Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up. Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to gnutls-cli binary diff --git a/tests/data/metadata/fence_ilo3.xml b/tests/data/metadata/fence_ilo3.xml index d19ee60e..8950d398 100644 --- a/tests/data/metadata/fence_ilo3.xml +++ b/tests/data/metadata/fence_ilo3.xml @@ -1,172 +1,172 @@ fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). Fencing action IPMI Lan Auth type. Ciphersuite to use (same as ipmitool -C parameter) Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Use Lanplus to improve security of connection Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Privilege level on IPMI device Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Path to ipmitool binary Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_ilo3_ssh.xml b/tests/data/metadata/fence_ilo3_ssh.xml index 311c8586..e2131a9d 100644 --- a/tests/data/metadata/fence_ilo3_ssh.xml +++ b/tests/data/metadata/fence_ilo3_ssh.xml @@ -1,156 +1,156 @@ fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. http://www.hp.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary Path to telnet binary diff --git a/tests/data/metadata/fence_ilo4.xml b/tests/data/metadata/fence_ilo4.xml index f817ad69..d4a2b874 100644 --- a/tests/data/metadata/fence_ilo4.xml +++ b/tests/data/metadata/fence_ilo4.xml @@ -1,172 +1,172 @@ fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). Fencing action IPMI Lan Auth type. Ciphersuite to use (same as ipmitool -C parameter) Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Use Lanplus to improve security of connection Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Privilege level on IPMI device Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Path to ipmitool binary Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_ilo4_ssh.xml b/tests/data/metadata/fence_ilo4_ssh.xml index c607975a..918b4c12 100644 --- a/tests/data/metadata/fence_ilo4_ssh.xml +++ b/tests/data/metadata/fence_ilo4_ssh.xml @@ -1,156 +1,156 @@ fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. http://www.hp.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary Path to telnet binary diff --git a/tests/data/metadata/fence_ilo_mp.xml b/tests/data/metadata/fence_ilo_mp.xml index 8d68dd97..a891d8ae 100644 --- a/tests/data/metadata/fence_ilo_mp.xml +++ b/tests/data/metadata/fence_ilo_mp.xml @@ -1,146 +1,146 @@ http://www.hp.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary Path to telnet binary diff --git a/tests/data/metadata/fence_ilo_ssh.xml b/tests/data/metadata/fence_ilo_ssh.xml index 9e69a571..9c42203a 100644 --- a/tests/data/metadata/fence_ilo_ssh.xml +++ b/tests/data/metadata/fence_ilo_ssh.xml @@ -1,156 +1,156 @@ fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet. http://www.hp.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary Path to telnet binary diff --git a/tests/data/metadata/fence_imm.xml b/tests/data/metadata/fence_imm.xml index acc56363..17b2670e 100644 --- a/tests/data/metadata/fence_imm.xml +++ b/tests/data/metadata/fence_imm.xml @@ -1,172 +1,172 @@ fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). Fencing action IPMI Lan Auth type. Ciphersuite to use (same as ipmitool -C parameter) Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Use Lanplus to improve security of connection Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Privilege level on IPMI device Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Path to ipmitool binary Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_ipmilan.xml b/tests/data/metadata/fence_ipmilan.xml index 5767f199..c9b4162f 100644 --- a/tests/data/metadata/fence_ipmilan.xml +++ b/tests/data/metadata/fence_ipmilan.xml @@ -1,172 +1,172 @@ fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). Fencing action IPMI Lan Auth type. Ciphersuite to use (same as ipmitool -C parameter) Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Use Lanplus to improve security of connection Login name Method to fence Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Privilege level on IPMI device Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Path to ipmitool binary Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_mpath.xml b/tests/data/metadata/fence_mpath.xml index d6072d96..f53e877c 100644 --- a/tests/data/metadata/fence_mpath.xml +++ b/tests/data/metadata/fence_mpath.xml @@ -1,110 +1,100 @@ fence_mpath is an I/O fencing agent that uses SCSI-3 persistent reservations to control access multipath devices. Underlying devices must support SCSI-3 persistent reservations (SPC-3 or greater) as well as the "preempt-and-abort" subcommand. The fence_mpath agent works by having an unique key for each pair of node and device that has to be set also in /etc/multipath.conf. Once registered, a single node will become the reservation holder by creating a "write exclusive, registrants only" reservation on the device(s). The result is that only registered nodes may write to the device(s). When a node failure occurs, the fence_mpath agent will remove the key belonging to the failed node from the device(s). The failed node will no longer be able to write to the device(s). A manual reboot is required. https://www.sourceware.org/dm/ Fencing action List of devices to use for current operation. Devices can be comma-separated list of device-mapper multipath devices (eg. /dev/dm-3). Each device must support SCSI-3 persistent reservations. Key to use for the current operation. This key should be unique to a node and have to be written in /etc/multipath.conf. For the "on" action, the key specifies the key use to register the local node. For the "off" action, this key specifies the key to be removed from the device(s). - - - - IP address or hostname of fencing device (together with --port-as-ip) - Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Path to mpathpersist binary - - - - Make "port/plug" to be an alias to IP address - Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Path to directory where fence agent can store information Count of attempts to retry power on Use sudo (without password) when calling 3rd party software Path to sudo binary diff --git a/tests/data/metadata/fence_rsa.xml b/tests/data/metadata/fence_rsa.xml index 95b632ae..bb1efa1a 100644 --- a/tests/data/metadata/fence_rsa.xml +++ b/tests/data/metadata/fence_rsa.xml @@ -1,146 +1,146 @@ fence_rsa is an I/O Fencing agent which can be used with the IBM RSA II management interface. It logs into an RSA II device via telnet and reboots the associated machine. Lengthy telnet connections to the RSA II device should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. http://www.ibm.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary Path to telnet binary diff --git a/tests/data/metadata/fence_rsb.xml b/tests/data/metadata/fence_rsb.xml index 766f8219..4fc70bd7 100644 --- a/tests/data/metadata/fence_rsb.xml +++ b/tests/data/metadata/fence_rsb.xml @@ -1,146 +1,146 @@ fence_rsb is an I/O Fencing agent which can be used with the Fujitsu-Siemens RSB management interface. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. http://www.fujitsu.com Fencing action Force Python regex for command prompt Identity file (private key) for SSH Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only - + IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Login password or passphrase Script to run to retrieve password - + IP address or hostname of fencing device (together with --port-as-ip) Use SSH connection SSH options to use Verbose mode Write debug information to given file Display version information and exit Display help and exit Wait X seconds before fencing is started Wait X seconds for cmd prompt after login Make "port/plug" to be an alias to IP address Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Count of attempts to retry power on Path to ssh binary Path to telnet binary