diff --git a/include/crm/common/results.h b/include/crm/common/results.h index 36007c482a..011faa7a25 100644 --- a/include/crm/common/results.h +++ b/include/crm/common/results.h @@ -1,281 +1,283 @@ /* * Copyright 2012-2021 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU Lesser General Public License * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. */ #ifndef CRM_RESULTS__H # define CRM_RESULTS__H #ifdef __cplusplus extern "C" { #endif /*! * \file * \brief Function and executable result codes * \ingroup core */ // Lifted from config.h /* The _Noreturn keyword of C11. */ #ifndef _Noreturn # if (defined __cplusplus \ && ((201103 <= __cplusplus && !(__GNUC__ == 4 && __GNUC_MINOR__ == 7)) \ || (defined _MSC_VER && 1900 <= _MSC_VER))) # define _Noreturn [[noreturn]] # elif ((!defined __cplusplus || defined __clang__) \ && (201112 <= (defined __STDC_VERSION__ ? __STDC_VERSION__ : 0) \ || 4 < __GNUC__ + (7 <= __GNUC_MINOR__))) /* _Noreturn works as-is. */ # elif 2 < __GNUC__ + (8 <= __GNUC_MINOR__) || 0x5110 <= __SUNPRO_C # define _Noreturn __attribute__ ((__noreturn__)) # elif 1200 <= (defined _MSC_VER ? _MSC_VER : 0) # define _Noreturn __declspec (noreturn) # else # define _Noreturn # endif #endif # define CRM_ASSERT(expr) do { \ if (!(expr)) { \ crm_abort(__FILE__, __func__, __LINE__, #expr, TRUE, FALSE); \ abort(); /* crm_abort() doesn't always abort! */ \ } \ } while(0) /* * Function return codes * * Most Pacemaker API functions return an integer return code. There are two * alternative interpretations. The legacy interpration is that the absolute * value of the return code is either a system error number or a custom * pcmk_err_* number. This is less than ideal because system error numbers are * constrained only to the positive int range, so there's the possibility * (though not noticed in the wild) that system errors and custom errors could * collide. The new intepretation is that negative values are from the pcmk_rc_e * enum, and positive values are system error numbers. Both use 0 for success. * * For system error codes, see: * - /usr/include/asm-generic/errno.h * - /usr/include/asm-generic/errno-base.h */ // Legacy custom return codes for Pacemaker API functions (deprecated) # define pcmk_ok 0 # define PCMK_ERROR_OFFSET 190 /* Replacements on non-linux systems, see include/portability.h */ # define PCMK_CUSTOM_OFFSET 200 /* Purely custom codes */ # define pcmk_err_generic 201 # define pcmk_err_no_quorum 202 # define pcmk_err_schema_validation 203 # define pcmk_err_transform_failed 204 # define pcmk_err_old_data 205 # define pcmk_err_diff_failed 206 # define pcmk_err_diff_resync 207 # define pcmk_err_cib_modified 208 # define pcmk_err_cib_backup 209 # define pcmk_err_cib_save 210 # define pcmk_err_schema_unchanged 211 # define pcmk_err_cib_corrupt 212 # define pcmk_err_multiple 213 # define pcmk_err_node_unknown 214 # define pcmk_err_already 215 /* On HPPA 215 is ENOSYM (Unknown error 215), which hopefully never happens. */ #ifdef __hppa__ # define pcmk_err_bad_nvpair 250 /* 216 is ENOTSOCK */ # define pcmk_err_unknown_format 252 /* 217 is EDESTADDRREQ */ #else # define pcmk_err_bad_nvpair 216 # define pcmk_err_unknown_format 217 #endif /*! * \enum pcmk_rc_e * \brief Return codes for Pacemaker API functions * * Any Pacemaker API function documented as returning a "standard Pacemaker * return code" will return pcmk_rc_ok (0) on success, and one of this * enumeration's other (negative) values or a (positive) system error number * otherwise. The custom codes are at -1001 and lower, so that the caller may * use -1 through -1000 for their own custom values if desired. While generally * referred to as "errors", nonzero values simply indicate a result, which might * or might not be an error depending on the calling context. */ enum pcmk_rc_e { /* When adding new values, use consecutively lower numbers, update the array * in lib/common/results.c, and test with crm_error. */ pcmk_rc_underflow = -1028, pcmk_rc_no_input = -1027, pcmk_rc_no_output = -1026, pcmk_rc_after_range = -1025, pcmk_rc_within_range = -1024, pcmk_rc_before_range = -1023, pcmk_rc_undetermined = -1022, pcmk_rc_op_unsatisfied = -1021, pcmk_rc_ipc_pid_only = -1020, pcmk_rc_ipc_unresponsive = -1019, pcmk_rc_ipc_unauthorized = -1018, pcmk_rc_no_quorum = -1017, pcmk_rc_schema_validation = -1016, pcmk_rc_schema_unchanged = -1015, pcmk_rc_transform_failed = -1014, pcmk_rc_old_data = -1013, pcmk_rc_diff_failed = -1012, pcmk_rc_diff_resync = -1011, pcmk_rc_cib_modified = -1010, pcmk_rc_cib_backup = -1009, pcmk_rc_cib_save = -1008, pcmk_rc_cib_corrupt = -1007, pcmk_rc_multiple = -1006, pcmk_rc_node_unknown = -1005, pcmk_rc_already = -1004, pcmk_rc_bad_nvpair = -1003, pcmk_rc_unknown_format = -1002, // Developers: Use a more specific code than pcmk_rc_error whenever possible pcmk_rc_error = -1001, // Values -1 through -1000 reserved for caller use pcmk_rc_ok = 0 // Positive values reserved for system error numbers }; /* Uniform exit codes * Everything is mapped to its OCF equivalent so that Pacemaker only deals with one set of codes */ enum ocf_exitcode { PCMK_OCF_OK = 0, PCMK_OCF_UNKNOWN_ERROR = 1, PCMK_OCF_INVALID_PARAM = 2, PCMK_OCF_UNIMPLEMENT_FEATURE = 3, PCMK_OCF_INSUFFICIENT_PRIV = 4, PCMK_OCF_NOT_INSTALLED = 5, PCMK_OCF_NOT_CONFIGURED = 6, PCMK_OCF_NOT_RUNNING = 7, /* End of overlap with LSB */ PCMK_OCF_RUNNING_PROMOTED = 8, - PCMK_OCF_FAILED_MASTER = 9, PCMK_OCF_FAILED_PROMOTED = 9, /* 150-199 reserved for application use */ PCMK_OCF_CONNECTION_DIED = 189, // Deprecated (see PCMK_LRM_OP_NOT_CONNECTED) PCMK_OCF_DEGRADED = 190, // Resource active but more likely to fail soon PCMK_OCF_DEGRADED_PROMOTED = 191, // Resource promoted but more likely to fail soon PCMK_OCF_EXEC_ERROR = 192, /* Generic problem invoking the agent */ PCMK_OCF_UNKNOWN = 193, /* State of the service is unknown - used for recording in-flight operations */ PCMK_OCF_SIGNAL = 194, PCMK_OCF_NOT_SUPPORTED = 195, PCMK_OCF_PENDING = 196, PCMK_OCF_CANCELLED = 197, PCMK_OCF_TIMEOUT = 198, PCMK_OCF_OTHER_ERROR = 199, /* Keep the same codes as PCMK_LSB */ #if !defined(PCMK_ALLOW_DEPRECATED) || (PCMK_ALLOW_DEPRECATED == 1) //! \deprecated Use PCMK_OCF_RUNNING_PROMOTED instead PCMK_OCF_RUNNING_MASTER = PCMK_OCF_RUNNING_PROMOTED, + //! \deprecated Use PCMK_OCF_FAILED_PROMOTED instead + PCMK_OCF_FAILED_MASTER = PCMK_OCF_FAILED_PROMOTED, + //! \deprecated Use PCMK_OCF_DEGRADED_PROMOTED instead PCMK_OCF_DEGRADED_MASTER = PCMK_OCF_DEGRADED_PROMOTED, #endif }; /* * Exit status codes * * We want well-specified (i.e. OS-invariant) exit status codes for our daemons * and applications so they can be relied on by callers. (Function return codes * and errno's do not make good exit statuses.) * * The only hard rule is that exit statuses must be between 0 and 255; all else * is convention. Universally, 0 is success, and 1 is generic error (excluding * OSes we don't support -- for example, OpenVMS considers 1 success!). * * For init scripts, the LSB gives meaning to 0-7, and sets aside 150-199 for * application use. OCF adds 8-9 and 189-199. * * sysexits.h was an attempt to give additional meanings, but never really * caught on. It uses 0 and 64-78. * * Bash reserves 2 ("incorrect builtin usage") and 126-255 (126 is "command * found but not executable", 127 is "command not found", 128 + n is * "interrupted by signal n"). * * tldp.org recommends 64-113 for application use. * * We try to overlap with the above conventions when practical. */ typedef enum crm_exit_e { // Common convention CRM_EX_OK = 0, CRM_EX_ERROR = 1, // LSB + OCF CRM_EX_INVALID_PARAM = 2, CRM_EX_UNIMPLEMENT_FEATURE = 3, CRM_EX_INSUFFICIENT_PRIV = 4, CRM_EX_NOT_INSTALLED = 5, CRM_EX_NOT_CONFIGURED = 6, CRM_EX_NOT_RUNNING = 7, // sysexits.h CRM_EX_USAGE = 64, // command line usage error CRM_EX_DATAERR = 65, // user-supplied data incorrect CRM_EX_NOINPUT = 66, // input file not available CRM_EX_NOUSER = 67, // user does not exist CRM_EX_NOHOST = 68, // host unknown CRM_EX_UNAVAILABLE = 69, // needed service unavailable CRM_EX_SOFTWARE = 70, // internal software bug CRM_EX_OSERR = 71, // external (OS/environmental) problem CRM_EX_OSFILE = 72, // system file not usable CRM_EX_CANTCREAT = 73, // file couldn't be created CRM_EX_IOERR = 74, // file I/O error CRM_EX_TEMPFAIL = 75, // try again CRM_EX_PROTOCOL = 76, // protocol violated CRM_EX_NOPERM = 77, // non-file permission issue CRM_EX_CONFIG = 78, // misconfiguration // Custom CRM_EX_FATAL = 100, // do not respawn CRM_EX_PANIC = 101, // panic the local host CRM_EX_DISCONNECT = 102, // lost connection to something CRM_EX_OLD = 103, // update older than existing config CRM_EX_DIGEST = 104, // digest comparison failed CRM_EX_NOSUCH = 105, // requested item does not exist CRM_EX_QUORUM = 106, // local partition does not have quorum CRM_EX_UNSAFE = 107, // requires --force or new conditions CRM_EX_EXISTS = 108, // requested item already exists CRM_EX_MULTIPLE = 109, // requested item has multiple matches CRM_EX_EXPIRED = 110, // requested item has expired CRM_EX_NOT_YET_IN_EFFECT = 111, // requested item is not in effect CRM_EX_INDETERMINATE = 112, // could not determine status CRM_EX_UNSATISFIED = 113, // requested item does not satisfy constraints // Other CRM_EX_TIMEOUT = 124, // convention from timeout(1) CRM_EX_MAX = 255, // ensure crm_exit_t can hold this } crm_exit_t; const char *pcmk_rc_name(int rc); const char *pcmk_rc_str(int rc); crm_exit_t pcmk_rc2exitc(int rc); int pcmk_rc2legacy(int rc); int pcmk_legacy2rc(int legacy_rc); const char *pcmk_strerror(int rc); const char *pcmk_errorname(int rc); const char *bz2_strerror(int rc); crm_exit_t crm_errno2exit(int rc); const char *crm_exit_name(crm_exit_t exit_code); const char *crm_exit_str(crm_exit_t exit_code); _Noreturn crm_exit_t crm_exit(crm_exit_t rc); #ifdef __cplusplus } #endif #endif