diff --git a/include/crm_internal.h b/include/crm_internal.h index 470fc6824c..5c078742d6 100644 --- a/include/crm_internal.h +++ b/include/crm_internal.h @@ -1,211 +1,212 @@ /* * Copyright 2006-2024 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU Lesser General Public License * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. */ #ifndef CRM_INTERNAL__H # define CRM_INTERNAL__H # ifndef PCMK__CONFIG_H # define PCMK__CONFIG_H # include # endif # include /* Our minimum glib dependency is 2.42. Define that as both the minimum and * maximum glib APIs that are allowed (i.e. APIs that were already deprecated * in 2.42, and APIs introduced after 2.42, cannot be used by Pacemaker code). */ #define GLIB_VERSION_MIN_REQUIRED GLIB_VERSION_2_42 #define GLIB_VERSION_MAX_ALLOWED GLIB_VERSION_2_42 # include # include # include /* Public API headers can guard including deprecated API headers with this * symbol, thus preventing internal code (which includes this header) from using * deprecated APIs, while still allowing external code to use them by default. */ #define PCMK_ALLOW_DEPRECATED 0 # include # include # include # include # include # include # include # include # include # include #define N_(String) (String) #ifdef ENABLE_NLS # define _(String) gettext(String) #else # define _(String) (String) #endif /* * XML element names used only by internal code */ #define PCMK__XE_ATTRIBUTES "attributes" #define PCMK__XE_NODE_STATE "node_state" +#define PCMK__XE_PARAM "param" #define PCMK__XE_PING_RESPONSE "ping_response" // @COMPAT Deprecated since 2.1.7 #define PCMK__XE_DIFF_ADDED "diff-added" // @COMPAT Deprecated since 2.1.7 #define PCMK__XE_DIFF_REMOVED "diff-removed" /* @COMPAT Deprecated since 2.0.0; alias for with PCMK_META_PROMOTABLE * set to "true" */ #define PCMK__XE_PROMOTABLE_LEGACY "master" /* * XML attribute names used only by internal code */ #define PCMK__XA_ATTR_DAMPENING "attr_dampening" #define PCMK__XA_ATTR_FORCE "attrd_is_force_write" #define PCMK__XA_ATTR_INTERVAL "attr_clear_interval" #define PCMK__XA_ATTR_IS_PRIVATE "attr_is_private" #define PCMK__XA_ATTR_IS_REMOTE "attr_is_remote" #define PCMK__XA_ATTR_NAME "attr_name" #define PCMK__XA_ATTR_NODE_ID "attr_host_id" #define PCMK__XA_ATTR_NODE_NAME "attr_host" #define PCMK__XA_ATTR_OPERATION "attr_clear_operation" #define PCMK__XA_ATTR_PATTERN "attr_regex" #define PCMK__XA_ATTR_RESOURCE "attr_resource" #define PCMK__XA_ATTR_SECTION "attr_section" #define PCMK__XA_ATTR_SET "attr_set" #define PCMK__XA_ATTR_SET_TYPE "attr_set_type" #define PCMK__XA_ATTR_SYNC_POINT "attr_sync_point" #define PCMK__XA_ATTR_USER "attr_user" #define PCMK__XA_ATTR_UUID "attr_key" #define PCMK__XA_ATTR_VALUE "attr_value" #define PCMK__XA_ATTR_VERSION "attr_version" #define PCMK__XA_ATTR_WRITER "attr_writer" #define PCMK__XA_CALL_ID "call-id" #define PCMK__XA_CONFIG_ERRORS "config-errors" #define PCMK__XA_CONFIG_WARNINGS "config-warnings" #define PCMK__XA_CONFIRM "confirm" #define PCMK__XA_CONN_HOST "connection_host" #define PCMK__XA_CRMD "crmd" #define PCMK__XA_CRMD_STATE "crmd_state" #define PCMK__XA_CRM_HOST_TO "crm_host_to" #define PCMK__XA_CRM_LIMIT_MAX "crm-limit-max" #define PCMK__XA_CRM_LIMIT_MODE "crm-limit-mode" #define PCMK__XA_CRM_SUBSYSTEM "crm_subsystem" #define PCMK__XA_CRM_SYS_FROM "crm_sys_from" #define PCMK__XA_CRM_SYS_TO "crm_sys_to" #define PCMK__XA_CRM_TASK "crm_task" #define PCMK__XA_CRM_TGRAPH_IN "crm-tgraph-in" #define PCMK__XA_CRM_USER "crm_user" #define PCMK__XA_DC_LEAVING "dc-leaving" #define PCMK__XA_DIGEST "digest" #define PCMK__XA_ELECTION_AGE_SEC "election-age-sec" #define PCMK__XA_ELECTION_AGE_NANO_SEC "election-age-nano-sec" #define PCMK__XA_ELECTION_ID "election-id" #define PCMK__XA_ELECTION_OWNER "election-owner" #define PCMK__XA_EXPECTED "expected" #define PCMK__XA_FILE "file" #define PCMK__XA_GRAPH_ERRORS "graph-errors" #define PCMK__XA_GRAPH_WARNINGS "graph-warnings" #define PCMK__XA_IN_CCM "in_ccm" #define PCMK__XA_JOIN "join" #define PCMK__XA_JOIN_ID "join_id" #define PCMK__XA_LONG_ID "long-id" #define PCMK__XA_MODE "mode" #define PCMK__XA_NODE_START_STATE "node_start_state" #define PCMK__XA_NODE_STATE "node_state" #define PCMK__XA_OPERATION_KEY "operation_key" #define PCMK__XA_OP_DIGEST "op-digest" #define PCMK__XA_OP_FORCE_RESTART "op-force-restart" #define PCMK__XA_OP_RESTART_DIGEST "op-restart-digest" #define PCMK__XA_OP_SECURE_DIGEST "op-secure-digest" #define PCMK__XA_OP_SECURE_PARAMS "op-secure-params" #define PCMK__XA_OP_STATUS "op-status" #define PCMK__XA_PACEMAKERD_STATE "pacemakerd_state" #define PCMK__XA_PRIORITY "priority" #define PCMK__XA_RC_CODE "rc-code" #define PCMK__XA_REAP "reap" /* Actions to be executed on Pacemaker Remote nodes are routed through the * controller on the cluster node hosting the remote connection. That cluster * node is considered the router node for the action. */ #define PCMK__XA_ROUTER_NODE "router_node" #define PCMK__XA_RSC_ID "rsc-id" #define PCMK__XA_SCHEMA "schema" #define PCMK__XA_SCHEMAS "schemas" #define PCMK__XA_SRC "src" #define PCMK__XA_SUBT "subt" // subtype #define PCMK__XA_T "t" // type #define PCMK__XA_TASK "task" #define PCMK__XA_TRANSITION_KEY "transition-key" #define PCMK__XA_TRANSITION_MAGIC "transition-magic" #define PCMK__XA_UPTIME "uptime" // @COMPAT Deprecated since 2.1.5 #define PCMK__XA_FIRST_INSTANCE "first-instance" // @COMPAT Deprecated since 1.1.12 #define PCMK__XA_REF "ref" // @COMPAT Deprecated since 2.1.6 #define PCMK__XA_REPLACE "replace" // @COMPAT Deprecated since 2.1.5 #define PCMK__XA_RSC_INSTANCE "rsc-instance" // @COMPAT Deprecated since 1.1.12 #define PCMK__XA_TAG "tag" // @COMPAT Deprecated since 2.1.5 #define PCMK__XA_THEN_INSTANCE "then-instance" // @COMPAT Deprecated since 2.1.5 #define PCMK__XA_WITH_RSC_INSTANCE "with-rsc-instance" /* * IPC service names that are only used internally */ # define PCMK__SERVER_BASED_RO "cib_ro" # define PCMK__SERVER_BASED_RW "cib_rw" # define PCMK__SERVER_BASED_SHM "cib_shm" /* * IPC commands that can be sent to Pacemaker daemons */ #define PCMK__ATTRD_CMD_PEER_REMOVE "peer-remove" #define PCMK__ATTRD_CMD_UPDATE "update" #define PCMK__ATTRD_CMD_UPDATE_BOTH "update-both" #define PCMK__ATTRD_CMD_UPDATE_DELAY "update-delay" #define PCMK__ATTRD_CMD_QUERY "query" #define PCMK__ATTRD_CMD_REFRESH "refresh" #define PCMK__ATTRD_CMD_FLUSH "flush" #define PCMK__ATTRD_CMD_SYNC "sync" #define PCMK__ATTRD_CMD_SYNC_RESPONSE "sync-response" #define PCMK__ATTRD_CMD_CLEAR_FAILURE "clear-failure" #define PCMK__ATTRD_CMD_CONFIRM "confirm" #define PCMK__CONTROLD_CMD_NODES "list-nodes" #endif /* CRM_INTERNAL__H */ diff --git a/lib/common/nvpair.c b/lib/common/nvpair.c index 68ceed9b8a..86f6f52ba7 100644 --- a/lib/common/nvpair.c +++ b/lib/common/nvpair.c @@ -1,979 +1,979 @@ /* * Copyright 2004-2024 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU Lesser General Public License * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. */ #include #include #include #include #include #include #include #include #include #include #include #include "crmcommon_private.h" /* * This file isolates handling of three types of name/value pairs: * * - pcmk_nvpair_t data type * - XML attributes () * - XML nvpair elements () */ // pcmk_nvpair_t handling /*! * \internal * \brief Allocate a new name/value pair * * \param[in] name New name (required) * \param[in] value New value * * \return Newly allocated name/value pair * \note The caller is responsible for freeing the result with * \c pcmk__free_nvpair(). */ static pcmk_nvpair_t * pcmk__new_nvpair(const char *name, const char *value) { pcmk_nvpair_t *nvpair = NULL; CRM_ASSERT(name); nvpair = calloc(1, sizeof(pcmk_nvpair_t)); CRM_ASSERT(nvpair); pcmk__str_update(&nvpair->name, name); pcmk__str_update(&nvpair->value, value); return nvpair; } /*! * \internal * \brief Free a name/value pair * * \param[in,out] nvpair Name/value pair to free */ static void pcmk__free_nvpair(gpointer data) { if (data) { pcmk_nvpair_t *nvpair = data; free(nvpair->name); free(nvpair->value); free(nvpair); } } /*! * \brief Prepend a name/value pair to a list * * \param[in,out] nvpairs List to modify * \param[in] name New entry's name * \param[in] value New entry's value * * \return New head of list * \note The caller is responsible for freeing the list with * \c pcmk_free_nvpairs(). */ GSList * pcmk_prepend_nvpair(GSList *nvpairs, const char *name, const char *value) { return g_slist_prepend(nvpairs, pcmk__new_nvpair(name, value)); } /*! * \brief Free a list of name/value pairs * * \param[in,out] list List to free */ void pcmk_free_nvpairs(GSList *nvpairs) { g_slist_free_full(nvpairs, pcmk__free_nvpair); } /*! * \internal * \brief Compare two name/value pairs * * \param[in] a First name/value pair to compare * \param[in] b Second name/value pair to compare * * \return 0 if a == b, 1 if a > b, -1 if a < b */ static gint pcmk__compare_nvpair(gconstpointer a, gconstpointer b) { int rc = 0; const pcmk_nvpair_t *pair_a = a; const pcmk_nvpair_t *pair_b = b; CRM_ASSERT(a != NULL); CRM_ASSERT(pair_a->name != NULL); CRM_ASSERT(b != NULL); CRM_ASSERT(pair_b->name != NULL); rc = strcmp(pair_a->name, pair_b->name); if (rc < 0) { return -1; } else if (rc > 0) { return 1; } return 0; } /*! * \brief Sort a list of name/value pairs * * \param[in,out] list List to sort * * \return New head of list */ GSList * pcmk_sort_nvpairs(GSList *list) { return g_slist_sort(list, pcmk__compare_nvpair); } /*! * \brief Create a list of name/value pairs from an XML node's attributes * * \param[in] XML to parse * * \return New list of name/value pairs * \note It is the caller's responsibility to free the list with * \c pcmk_free_nvpairs(). */ GSList * pcmk_xml_attrs2nvpairs(const xmlNode *xml) { GSList *result = NULL; for (xmlAttrPtr iter = pcmk__xe_first_attr(xml); iter != NULL; iter = iter->next) { result = pcmk_prepend_nvpair(result, (const char *) iter->name, (const char *) pcmk__xml_attr_value(iter)); } return result; } /*! * \internal * \brief Add an XML attribute corresponding to a name/value pair * * Suitable for glib list iterators, this function adds a NAME=VALUE * XML attribute based on a given name/value pair. * * \param[in] data Name/value pair * \param[out] user_data XML node to add attributes to */ static void pcmk__nvpair_add_xml_attr(gpointer data, gpointer user_data) { pcmk_nvpair_t *pair = data; xmlNode *parent = user_data; crm_xml_add(parent, pair->name, pair->value); } /*! * \brief Add XML attributes based on a list of name/value pairs * * \param[in,out] list List of name/value pairs * \param[in,out] xml XML node to add attributes to */ void pcmk_nvpairs2xml_attrs(GSList *list, xmlNode *xml) { g_slist_foreach(list, pcmk__nvpair_add_xml_attr, xml); } // convenience function for name=value strings /*! * \internal * \brief Extract the name and value from an input string formatted as "name=value". * If unable to extract them, they are returned as NULL. * * \param[in] input The input string, likely from the command line * \param[out] name Everything before the first '=' in the input string * \param[out] value Everything after the first '=' in the input string * * \return 2 if both name and value could be extracted, 1 if only one could, and * and error code otherwise */ int pcmk__scan_nvpair(const char *input, char **name, char **value) { #ifdef HAVE_SSCANF_M *name = NULL; *value = NULL; if (sscanf(input, "%m[^=]=%m[^\n]", name, value) <= 0) { return -pcmk_err_bad_nvpair; } #else char *sep = NULL; *name = NULL; *value = NULL; sep = strstr(optarg, "="); if (sep == NULL) { return -pcmk_err_bad_nvpair; } *name = strndup(input, sep-input); if (*name == NULL) { return -ENOMEM; } /* If the last char in optarg is =, the user gave no * value for the option. Leave it as NULL. */ if (*(sep+1) != '\0') { *value = strdup(sep+1); if (*value == NULL) { return -ENOMEM; } } #endif if (*name != NULL && *value != NULL) { return 2; } else if (*name != NULL || *value != NULL) { return 1; } else { return -pcmk_err_bad_nvpair; } } /*! * \internal * \brief Format a name/value pair. * * Units can optionally be provided for the value. Note that unlike most * formatting functions, this one returns the formatted string. It is * assumed that the most common use of this function will be to build up * a string to be output as part of other functions. * * \note The caller is responsible for freeing the return value after use. * * \param[in] name The name of the nvpair. * \param[in] value The value of the nvpair. * \param[in] units Optional units for the value, or NULL. * * \return Newly allocated string with name/value pair */ char * pcmk__format_nvpair(const char *name, const char *value, const char *units) { return crm_strdup_printf("%s=\"%s%s\"", name, value, units ? units : ""); } // XML attribute handling /*! * \brief Create an XML attribute with specified name and value * * \param[in,out] node XML node to modify * \param[in] name Attribute name to set * \param[in] value Attribute value to set * * \return New value on success, \c NULL otherwise * \note This does nothing if node, name, or value are \c NULL or empty. */ const char * crm_xml_add(xmlNode *node, const char *name, const char *value) { bool dirty = FALSE; xmlAttr *attr = NULL; CRM_CHECK(node != NULL, return NULL); CRM_CHECK(name != NULL, return NULL); if (value == NULL) { return NULL; } if (pcmk__tracking_xml_changes(node, FALSE)) { const char *old = crm_element_value(node, name); if (old == NULL || value == NULL || strcmp(old, value) != 0) { dirty = TRUE; } } if (dirty && (pcmk__check_acl(node, name, pcmk__xf_acl_create) == FALSE)) { crm_trace("Cannot add %s=%s to %s", name, value, node->name); return NULL; } attr = xmlSetProp(node, (pcmkXmlStr) name, (pcmkXmlStr) value); if (dirty) { pcmk__mark_xml_attr_dirty(attr); } CRM_CHECK(attr && attr->children && attr->children->content, return NULL); return (char *)attr->children->content; } /*! * \brief Create an XML attribute with specified name and integer value * * This is like \c crm_xml_add() but taking an integer value. * * \param[in,out] node XML node to modify * \param[in] name Attribute name to set * \param[in] value Attribute value to set * * \return New value as string on success, \c NULL otherwise * \note This does nothing if node or name are \c NULL or empty. */ const char * crm_xml_add_int(xmlNode *node, const char *name, int value) { char *number = pcmk__itoa(value); const char *added = crm_xml_add(node, name, number); free(number); return added; } /*! * \brief Create an XML attribute with specified name and unsigned value * * This is like \c crm_xml_add() but taking a guint value. * * \param[in,out] node XML node to modify * \param[in] name Attribute name to set * \param[in] ms Attribute value to set * * \return New value as string on success, \c NULL otherwise * \note This does nothing if node or name are \c NULL or empty. */ const char * crm_xml_add_ms(xmlNode *node, const char *name, guint ms) { char *number = crm_strdup_printf("%u", ms); const char *added = crm_xml_add(node, name, number); free(number); return added; } // Maximum size of null-terminated string representation of 64-bit integer // -9223372036854775808 #define LLSTRSIZE 21 /*! * \brief Create an XML attribute with specified name and long long int value * * This is like \c crm_xml_add() but taking a long long int value. It is a * useful equivalent for defined types like time_t, etc. * * \param[in,out] xml XML node to modify * \param[in] name Attribute name to set * \param[in] value Attribute value to set * * \return New value as string on success, \c NULL otherwise * \note This does nothing if xml or name are \c NULL or empty. * This does not support greater than 64-bit values. */ const char * crm_xml_add_ll(xmlNode *xml, const char *name, long long value) { char s[LLSTRSIZE] = { '\0', }; if (snprintf(s, LLSTRSIZE, "%lld", (long long) value) == LLSTRSIZE) { return NULL; } return crm_xml_add(xml, name, s); } /*! * \brief Create XML attributes for seconds and microseconds * * This is like \c crm_xml_add() but taking a struct timeval. * * \param[in,out] xml XML node to modify * \param[in] name_sec Name of XML attribute for seconds * \param[in] name_usec Name of XML attribute for microseconds (or NULL) * \param[in] value Time value to set * * \return New seconds value as string on success, \c NULL otherwise * \note This does nothing if xml, name_sec, or value is \c NULL. */ const char * crm_xml_add_timeval(xmlNode *xml, const char *name_sec, const char *name_usec, const struct timeval *value) { const char *added = NULL; if (xml && name_sec && value) { added = crm_xml_add_ll(xml, name_sec, (long long) value->tv_sec); if (added && name_usec) { // Any error is ignored (we successfully added seconds) crm_xml_add_ll(xml, name_usec, (long long) value->tv_usec); } } return added; } /*! * \brief Retrieve the value of an XML attribute * * \param[in] data XML node to check * \param[in] name Attribute name to check * * \return Value of specified attribute (may be \c NULL) */ const char * crm_element_value(const xmlNode *data, const char *name) { xmlAttr *attr = NULL; if (data == NULL) { crm_err("Couldn't find %s in NULL", name ? name : ""); CRM_LOG_ASSERT(data != NULL); return NULL; } else if (name == NULL) { crm_err("Couldn't find NULL in %s", data->name); return NULL; } /* The first argument to xmlHasProp() has always been const, * but libxml2 <2.9.2 didn't declare that, so cast it */ attr = xmlHasProp((xmlNode *) data, (pcmkXmlStr) name); if (!attr || !attr->children) { return NULL; } return (const char *) attr->children->content; } /*! * \brief Retrieve the integer value of an XML attribute * * This is like \c crm_element_value() but getting the value as an integer. * * \param[in] data XML node to check * \param[in] name Attribute name to check * \param[out] dest Where to store element value * * \return 0 on success, -1 otherwise */ int crm_element_value_int(const xmlNode *data, const char *name, int *dest) { const char *value = NULL; CRM_CHECK(dest != NULL, return -1); value = crm_element_value(data, name); if (value) { long long value_ll; if ((pcmk__scan_ll(value, &value_ll, 0LL) != pcmk_rc_ok) || (value_ll < INT_MIN) || (value_ll > INT_MAX)) { *dest = PCMK__PARSE_INT_DEFAULT; } else { *dest = (int) value_ll; return 0; } } return -1; } /*! * \brief Retrieve the long long integer value of an XML attribute * * This is like \c crm_element_value() but getting the value as a long long int. * * \param[in] data XML node to check * \param[in] name Attribute name to check * \param[out] dest Where to store element value * * \return 0 on success, -1 otherwise */ int crm_element_value_ll(const xmlNode *data, const char *name, long long *dest) { const char *value = NULL; CRM_CHECK(dest != NULL, return -1); value = crm_element_value(data, name); if ((value != NULL) && (pcmk__scan_ll(value, dest, PCMK__PARSE_INT_DEFAULT) == pcmk_rc_ok)) { return 0; } return -1; } /*! * \brief Retrieve the millisecond value of an XML attribute * * This is like \c crm_element_value() but returning the value as a guint. * * \param[in] data XML node to check * \param[in] name Attribute name to check * \param[out] dest Where to store attribute value * * \return \c pcmk_ok on success, -1 otherwise */ int crm_element_value_ms(const xmlNode *data, const char *name, guint *dest) { const char *value = NULL; long long value_ll; CRM_CHECK(dest != NULL, return -1); *dest = 0; value = crm_element_value(data, name); if ((pcmk__scan_ll(value, &value_ll, 0LL) != pcmk_rc_ok) || (value_ll < 0) || (value_ll > G_MAXUINT)) { return -1; } *dest = (guint) value_ll; return pcmk_ok; } /*! * \brief Retrieve the seconds-since-epoch value of an XML attribute * * This is like \c crm_element_value() but returning the value as a time_t. * * \param[in] xml XML node to check * \param[in] name Attribute name to check * \param[out] dest Where to store attribute value * * \return \c pcmk_ok on success, -1 otherwise */ int crm_element_value_epoch(const xmlNode *xml, const char *name, time_t *dest) { long long value_ll = 0; if (crm_element_value_ll(xml, name, &value_ll) < 0) { return -1; } /* Unfortunately, we can't do any bounds checking, since time_t has neither * standardized bounds nor constants defined for them. */ *dest = (time_t) value_ll; return pcmk_ok; } /*! * \brief Retrieve the value of XML second/microsecond attributes as time * * This is like \c crm_element_value() but returning value as a struct timeval. * * \param[in] xml XML to parse * \param[in] name_sec Name of XML attribute for seconds * \param[in] name_usec Name of XML attribute for microseconds * \param[out] dest Where to store result * * \return \c pcmk_ok on success, -errno on error * \note Values default to 0 if XML or XML attribute does not exist */ int crm_element_value_timeval(const xmlNode *xml, const char *name_sec, const char *name_usec, struct timeval *dest) { long long value_i = 0; CRM_CHECK(dest != NULL, return -EINVAL); dest->tv_sec = 0; dest->tv_usec = 0; if (xml == NULL) { return pcmk_ok; } /* Unfortunately, we can't do any bounds checking, since there are no * constants provided for the bounds of time_t and suseconds_t, and * calculating them isn't worth the effort. If there are XML values * beyond the native sizes, there will probably be worse problems anyway. */ // Parse seconds errno = 0; if (crm_element_value_ll(xml, name_sec, &value_i) < 0) { return -errno; } dest->tv_sec = (time_t) value_i; // Parse microseconds if (crm_element_value_ll(xml, name_usec, &value_i) < 0) { return -errno; } dest->tv_usec = (suseconds_t) value_i; return pcmk_ok; } /*! * \brief Retrieve a copy of the value of an XML attribute * * This is like \c crm_element_value() but allocating new memory for the result. * * \param[in] data XML node to check * \param[in] name Attribute name to check * * \return Value of specified attribute (may be \c NULL) * \note The caller is responsible for freeing the result. */ char * crm_element_value_copy(const xmlNode *data, const char *name) { char *value_copy = NULL; pcmk__str_update(&value_copy, crm_element_value(data, name)); return value_copy; } /*! * \brief Add hash table entry to XML as (possibly legacy) name/value * * Suitable for \c g_hash_table_foreach(), this function takes a hash table key * and value, with an XML node passed as user data, and adds an XML attribute * with the specified name and value if it does not already exist. If the key * name starts with a digit, this will instead add a \ child to the XML (for legacy compatibility with heartbeat). * * \param[in] key Key of hash table entry * \param[in] value Value of hash table entry * \param[in,out] user_data XML node */ void hash2smartfield(gpointer key, gpointer value, gpointer user_data) { const char *name = key; const char *s_value = value; xmlNode *xml_node = user_data; if (isdigit(name[0])) { - xmlNode *tmp = create_xml_node(xml_node, XML_TAG_PARAM); + xmlNode *tmp = create_xml_node(xml_node, PCMK__XE_PARAM); crm_xml_add(tmp, PCMK_XA_NAME, name); crm_xml_add(tmp, PCMK_XA_VALUE, s_value); } else if (crm_element_value(xml_node, name) == NULL) { crm_xml_add(xml_node, name, s_value); crm_trace("dumped: %s=%s", name, s_value); } else { crm_trace("duplicate: %s=%s", name, s_value); } } /*! * \brief Set XML attribute based on hash table entry * * Suitable for \c g_hash_table_foreach(), this function takes a hash table key * and value, with an XML node passed as user data, and adds an XML attribute * with the specified name and value if it does not already exist. * * \param[in] key Key of hash table entry * \param[in] value Value of hash table entry * \param[in,out] user_data XML node */ void hash2field(gpointer key, gpointer value, gpointer user_data) { const char *name = key; const char *s_value = value; xmlNode *xml_node = user_data; if (crm_element_value(xml_node, name) == NULL) { crm_xml_add(xml_node, name, s_value); } else { crm_trace("duplicate: %s=%s", name, s_value); } } /*! * \brief Set XML attribute based on hash table entry, as meta-attribute name * * Suitable for \c g_hash_table_foreach(), this function takes a hash table key * and value, with an XML node passed as user data, and adds an XML attribute * with the meta-attribute version of the specified name and value if it does * not already exist and if the name does not appear to be cluster-internal. * * \param[in] key Key of hash table entry * \param[in] value Value of hash table entry * \param[in,out] user_data XML node */ void hash2metafield(gpointer key, gpointer value, gpointer user_data) { char *crm_name = NULL; if (key == NULL || value == NULL) { return; } /* Filter out cluster-generated attributes that contain a '#' or ':' * (like fail-count and last-failure). */ for (crm_name = key; *crm_name; ++crm_name) { if ((*crm_name == '#') || (*crm_name == ':')) { return; } } crm_name = crm_meta_name(key); hash2field(crm_name, value, user_data); free(crm_name); } // nvpair handling /*! * \brief Create an XML name/value pair * * \param[in,out] parent If not \c NULL, make new XML node a child of this one * \param[in] id Set this as XML ID (or NULL to auto-generate) * \param[in] name Name to use * \param[in] value Value to use * * \return New XML object on success, \c NULL otherwise */ xmlNode * crm_create_nvpair_xml(xmlNode *parent, const char *id, const char *name, const char *value) { xmlNode *nvp; /* id can be NULL so we auto-generate one, and name can be NULL if this * will be used to delete a name/value pair by ID, but both can't be NULL */ CRM_CHECK(id || name, return NULL); nvp = create_xml_node(parent, PCMK_XE_NVPAIR); CRM_CHECK(nvp, return NULL); if (id) { crm_xml_add(nvp, PCMK_XA_ID, id); } else { crm_xml_set_id(nvp, "%s-%s", pcmk__s(ID(parent), PCMK_XE_NVPAIR), name); } crm_xml_add(nvp, PCMK_XA_NAME, name); crm_xml_add(nvp, PCMK_XA_VALUE, value); return nvp; } /*! * \brief Add XML nvpair element based on hash table entry * * Suitable for \c g_hash_table_foreach(), this function takes a hash table key * and value, with an XML node passed as the user data, and adds an \c nvpair * XML element with the specified name and value. * * \param[in] key Key of hash table entry * \param[in] value Value of hash table entry * \param[in,out] user_data XML node */ void hash2nvpair(gpointer key, gpointer value, gpointer user_data) { const char *name = key; const char *s_value = value; xmlNode *xml_node = user_data; crm_create_nvpair_xml(xml_node, name, name, s_value); crm_trace("dumped: name=%s value=%s", name, s_value); } /*! * \brief Retrieve XML attributes as a hash table * * Given an XML element, this will look for any \ element child, * creating a hash table of (newly allocated string) name/value pairs taken * first from the attributes element's NAME=VALUE XML attributes, and then * from any \ children of attributes. * * \param[in] XML node to parse * * \return Hash table with name/value pairs * \note It is the caller's responsibility to free the result using * \c g_hash_table_destroy(). */ GHashTable * xml2list(const xmlNode *parent) { xmlNode *child = NULL; xmlAttrPtr pIter = NULL; xmlNode *nvpair_list = NULL; GHashTable *nvpair_hash = pcmk__strkey_table(free, free); CRM_CHECK(parent != NULL, return nvpair_hash); nvpair_list = find_xml_node(parent, PCMK__XE_ATTRIBUTES, FALSE); if (nvpair_list == NULL) { crm_trace("No attributes in %s", parent->name); crm_log_xml_trace(parent, "No attributes for resource op"); } crm_log_xml_trace(nvpair_list, "Unpacking"); for (pIter = pcmk__xe_first_attr(nvpair_list); pIter != NULL; pIter = pIter->next) { const char *p_name = (const char *)pIter->name; const char *p_value = pcmk__xml_attr_value(pIter); crm_trace("Added %s=%s", p_name, p_value); g_hash_table_insert(nvpair_hash, strdup(p_name), strdup(p_value)); } for (child = pcmk__xml_first_child(nvpair_list); child != NULL; child = pcmk__xml_next(child)) { - if (strcmp((const char *)child->name, XML_TAG_PARAM) == 0) { + if (strcmp((const char *) child->name, PCMK__XE_PARAM) == 0) { const char *key = crm_element_value(child, PCMK_XA_NAME); const char *value = crm_element_value(child, PCMK_XA_VALUE); crm_trace("Added %s=%s", key, value); if (key != NULL && value != NULL) { g_hash_table_insert(nvpair_hash, strdup(key), strdup(value)); } } } return nvpair_hash; } void pcmk__xe_set_bool_attr(xmlNodePtr node, const char *name, bool value) { crm_xml_add(node, name, value ? PCMK_VALUE_TRUE : PCMK_VALUE_FALSE); } int pcmk__xe_get_bool_attr(const xmlNode *node, const char *name, bool *value) { const char *xml_value = NULL; int ret, rc; if (node == NULL) { return ENODATA; } else if (name == NULL || value == NULL) { return EINVAL; } xml_value = crm_element_value(node, name); if (xml_value == NULL) { return ENODATA; } rc = crm_str_to_boolean(xml_value, &ret); if (rc == 1) { *value = ret; return pcmk_rc_ok; } else { return pcmk_rc_bad_input; } } bool pcmk__xe_attr_is_true(const xmlNode *node, const char *name) { bool value = false; int rc; rc = pcmk__xe_get_bool_attr(node, name, &value); return rc == pcmk_rc_ok && value == true; } // Deprecated functions kept only for backward API compatibility // LCOV_EXCL_START #include int pcmk_scan_nvpair(const char *input, char **name, char **value) { return pcmk__scan_nvpair(input, name, value); } char * pcmk_format_nvpair(const char *name, const char *value, const char *units) { return pcmk__format_nvpair(name, value, units); } char * pcmk_format_named_time(const char *name, time_t epoch_time) { char *now_s = pcmk__epoch2str(&epoch_time, 0); char *result = crm_strdup_printf("%s=\"%s\"", name, pcmk__s(now_s, "")); free(now_s); return result; } const char * crm_xml_replace(xmlNode *node, const char *name, const char *value) { bool dirty = FALSE; xmlAttr *attr = NULL; const char *old_value = NULL; CRM_CHECK(node != NULL, return NULL); CRM_CHECK(name != NULL && name[0] != 0, return NULL); old_value = crm_element_value(node, name); /* Could be re-setting the same value */ CRM_CHECK(old_value != value, return value); if (pcmk__check_acl(node, name, pcmk__xf_acl_write) == FALSE) { /* Create a fake object linked to doc->_private instead? */ crm_trace("Cannot replace %s=%s to %s", name, value, node->name); return NULL; } else if (old_value && !value) { xml_remove_prop(node, name); return NULL; } if (pcmk__tracking_xml_changes(node, FALSE)) { if (!old_value || !value || !strcmp(old_value, value)) { dirty = TRUE; } } attr = xmlSetProp(node, (pcmkXmlStr) name, (pcmkXmlStr) value); if (dirty) { pcmk__mark_xml_attr_dirty(attr); } CRM_CHECK(attr && attr->children && attr->children->content, return NULL); return (char *) attr->children->content; } // LCOV_EXCL_STOP // End deprecated API