diff --git a/extra/resources/ifspeed.in b/extra/resources/ifspeed.in
index b252ff0d2e..3bb147e615 100755
--- a/extra/resources/ifspeed.in
+++ b/extra/resources/ifspeed.in
@@ -1,554 +1,554 @@
 #!@BASH_PATH@
 #
 # ocf:pacemaker:ifspeed resource agent
 #
 # Copyright 2011-2022 the Pacemaker project contributors
 #
 # The version control history for this file may have further details.
 #
 # This source code is licensed under the GNU General Public License version 2
 # or later (GPLv2+) WITHOUT ANY WARRANTY.
 #
 
 #
 # OCF resource agent which monitors state of network interface and records it
 # as a node attribute in the CIB based on the sum of speeds of its active (up,
 # link detected, not blocked) underlying interfaces.
 #
 # Partially based on 'ping' RA by Andrew Beekhof
 #
 # Change on 2017 by Tomer Azran <tomerazran@gmail.com>:
 #     Add "ip" parameter to detect network interface name by ip address:
 #     http://lists.clusterlabs.org/pipermail/users/2017-August/006224.html
 #
 # OCF instance parameters:
 #    OCF_RESKEY_name:         name of attribute to set in CIB
 #    OCF_RESKEY_ip            ip address to check
 #    OCF_RESKEY_iface:        network interface to monitor
 #    OCF_RESKEY_bridge_ports: if not null and OCF_RESKEY_iface is a bridge, list of
 #                             bridge ports to consider.
 #                             Default is all ports which have designated_bridge=root_id
 #    OCF_RESKEY_weight_base:  Relative weight of 1Gbps. This can be used to tune
 #                             value of resulting CIB attribute.
 #
 # Initialization:
 
 : ${OCF_FUNCTIONS:="${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs"}
 
 # If these aren't available, we can still show help,
 # which is all that is needed to build the man pages.
 [ -r "${OCF_FUNCTIONS}" ] && . "${OCF_FUNCTIONS}"
 [ -r "${OCF_FUNCTIONS_DIR}/findif.sh" ] && . "${OCF_FUNCTIONS_DIR}/findif.sh"
 : ${OCF_SUCCESS:=0}
 
 : ${__OCF_ACTION:=$1}
 
 FINDIF=findif
 
 # Defaults
 OCF_RESKEY_name_default="ifspeed"
 OCF_RESKEY_bridge_ports_default="detect"
 OCF_RESKEY_weight_base_default=1000
 OCF_RESKEY_dampen_default=5
 
 # Explicitly list all environment variables used, to make static analysis happy
 : ${OCF_RESKEY_name:=${OCF_RESKEY_name_default}}
 : ${OCF_RESKEY_bridge_ports:=${OCF_RESKEY_bridge_ports_default}}
 : ${OCF_RESKEY_weight_base:=${OCF_RESKEY_weight_base_default}}
 : ${OCF_RESKEY_dampen:=${OCF_RESKEY_dampen_default}}
 : ${OCF_RESKEY_iface:=""}
 : ${OCF_RESKEY_ip:=""}
 : ${OCF_RESKEY_debug:="false"}
 
 
 meta_data() {
         cat <<END
 <?xml version="1.0"?>
 <resource-agent name="ifspeed" version="1.1">
-<version>1.0</version>
+<version>1.1</version>
 
 <longdesc lang="en">
 Every time the monitor action is run, this resource agent records (in the CIB)
 (relative) speed of network interface it monitors.
 
 This RA can monitor physical interfaces, bonds, bridges, vlans and (hopefully)
 any combination of them.
 
 Examples:
 *) Bridge on top of one 10Gbps interface (eth2) and 802.3ad bonding (bond0) built
    on two 1Gbps interfaces (eth0 and eth1).
 *) Active-backup bonding built on top of one physical interface and one vlan on
    another interface.
 
 For STP-enabled bridges this RA tries to some-how guess network topology and by
 default looks only on ports which are connected to upstream switch. This can be
 overridden by 'bridge_ports' parameter. Active interfaces in this case are those
 in "forwarding" state.
 
 For balancing bonds, this agent sums speeds of underlying "up" ports (and
 applies coefficient 0.8 to result).
 
 For non-balancing bonds ('active-backup' and probably 'broadcast'), only the
 speed of the currently active port is used.
 </longdesc>
 <shortdesc lang="en">Network interface speed monitor</shortdesc>
 
 <parameters>
 
-<parameter name="name" unique="1">
+<parameter name="name" unique-group="name">
 <longdesc lang="en">
 The name of the attribute to set.  This is the name to be used in the constraints.
 </longdesc>
 <shortdesc lang="en">Attribute name</shortdesc>
 <content type="string" default="${OCF_RESKEY_name_default}"/>
 </parameter>
 
-<parameter name="iface" unique="0" required="1">
+<parameter name="iface" unique-group="iface" required="1">
 <longdesc lang="en">
 Network interface to monitor.
 </longdesc>
 <shortdesc lang="en">Network interface</shortdesc>
 <content type="string" default=""/>
 </parameter>
 
-<parameter name="ip" unique="0" required="0">
+<parameter name="ip" unique-group="ip">
 <longdesc lang="en">
 Try to detect interface name by detecting the interface that holds the IP address.
 The IPv4 (dotted quad notation) or IPv6 address (colon hexadecimal notation)
 example IPv4 "192.168.1.1".
 example IPv6 "2001:db8:DC28:0:0:FC57:D4C8:1FFF".
 </longdesc>
 <shortdesc lang="en">IPv4 or IPv6 address</shortdesc>
 <content type="string" default="" />
 </parameter>
 
-<parameter name="bridge_ports" unique="0">
+<parameter name="bridge_ports" unique-group="iface">
 <longdesc lang="en">
 If not null and OCF_RESKEY_iface is a bridge, list of bridge ports to consider.
 Default is all ports which have designated_bridge=root_id.
 </longdesc>
 <shortdesc lang="en">Bridge ports</shortdesc>
 <content type="string" default="${OCF_RESKEY_bridge_ports_default}"/>
 </parameter>
 
-<parameter name="weight_base" unique="0">
+<parameter name="weight_base">
 <longdesc lang="en">
 Relative weight of 1Gbps in interface speed.
 Can be used to tune how big attribute value will be.
 </longdesc>
 <shortdesc lang="en">Weight of 1Gbps</shortdesc>
 <content type="integer" default="${OCF_RESKEY_weight_base_default}"/>
 </parameter>
 
-<parameter name="dampen" unique="0">
+<parameter name="dampen">
 <longdesc lang="en">
 The time to wait (dampening) for further changes to occur.
 </longdesc>
 <shortdesc lang="en">Dampening interval</shortdesc>
 <content type="integer" default="${OCF_RESKEY_dampen_default}"/>
 </parameter>
 
-<parameter name="debug" unique="0">
+<parameter name="debug">
 <longdesc lang="en">
 Log what have been done more verbosely.
 </longdesc>
 <shortdesc lang="en">Verbose logging</shortdesc>
 <content type="string" default="false"/>
 </parameter>
 
 </parameters>
 
 <actions>
 <action name="start"   timeout="30s" />
 <action name="stop"    timeout="30s" />
 <action name="monitor" depth="0"  timeout="30s" interval="10s"/>
 <action name="meta-data"  timeout="5s" />
 <action name="validate-all"  timeout="30s" />
 </actions>
 </resource-agent>
 END
 }
 
 usage() {
     cat <<END
 usage: $0 {start|stop|monitor|validate-all|meta-data}
 
 Expects to have a fully populated OCF RA-compliant environment set.
 END
 }
 
 start() {
     monitor
     if [ $? -eq $OCF_SUCCESS ]; then
         return $OCF_SUCCESS
     fi
     ha_pseudo_resource ${ha_pseudo_resource_name} start
     update
     return $?
 }
 
 stop() {
     ha_pseudo_resource "${ha_pseudo_resource_name}" stop
     attrd_updater -D -n "${OCF_RESKEY_name}" -d "${OCF_RESKEY_dampen}" ${attrd_options}
     return $OCF_SUCCESS
 }
 
 monitor() {
     local ret
     ha_pseudo_resource "${ha_pseudo_resource_name}" monitor
     ret=$?
     if [ ${ret} -eq $OCF_SUCCESS ] ; then
         update
     fi
     return ${ret}
 }
 
 # This function tries to guess nic interface by IP
 get_nic_name_by_ip(){
     # $FINDIF takes its parameters from the environment.
     # Its output is as follows:
     # [NIC_NAME] netmask [NETMASK] broadcast [BROADCAST}
     NICINFO=$( "${FINDIF}" )
     rc=$?
     if [ $rc -eq 0 ];then
         # Get NIC_NAME part of findif function output.
         echo "${NICINFO%% *}"
     else
         echo ""
     fi
 }
 
 validate() {
     # Check the interface parameter
     if [ -z "${OCF_RESKEY_iface}" ]; then
         if [ -z "${OCF_RESKEY_ip}" ]; then
             ocf_log err "Empty iface and ip parameters. Please specify either an interface name or valid ip address."
             exit $OCF_ERR_CONFIGURED
         else
             ipcheck_ipv4 "${OCF_RESKEY_ip}"
             if [ $? -eq 1 ] ; then
                 ipcheck_ipv6 "${OCF_RESKEY_ip}"
                 if [ $? -eq 1 ] ; then
                   ocf_exit_reason "ip parameter [${OCF_RESKEY_ip}] is not a valid ip address."
                   exit $OCF_ERR_CONFIGURED
                 fi
             fi
         fi
     fi
     return $OCF_SUCCESS
 }
 
 iface_get_speed() {
     local iface="$1"
     local operstate
     local carrier
     local speed
 
     if [ ! -e "/sys/class/net/${iface}" ] ; then
         echo "0"
     elif iface_is_bridge "${iface}" ; then # bridges do not have operstate
         read carrier < "/sys/class/net/${iface}/carrier"
 
         if [ "${carrier}" != "1" ] ; then
             echo "0"
         else
             bridge_get_speed "${iface}"
         fi
     else
         read operstate < "/sys/class/net/${iface}/operstate"
         read carrier < "/sys/class/net/${iface}/carrier"
 
         if [ "${operstate}" != "up" ] || [ "${carrier}" != "1" ] ; then
             echo "0"
         elif iface_is_bond "${iface}" ; then
             bond_get_speed "${iface}"
         elif iface_is_vlan "${iface}" ; then
             iface_get_speed "$(vlan_get_phy "${iface}")"
         elif iface_is_hfi1 "${iface}" ; then
             hfi1_get_speed "${iface}"
         else
             read speed < "/sys/class/net/${iface}/speed"
             echo "${speed}"
         fi
     fi
 }
 
 iface_is_vlan() {
     local iface="$1"
     [ -e "/proc/net/vlan/${iface}" ] && return 0 || return 1
 }
 
 iface_is_bridge() {
     local iface="$1"
     [ -e "/sys/class/net/${iface}/bridge" ] && return 0 || return 1
 }
 
 iface_is_bond() {
     local iface="$1"
     [ -e "/sys/class/net/${iface}/bonding" ] && return 0 || return 1
 }
 
 iface_is_hfi1() {
     local iface="$1"
     driver=$(readlink "/sys/class/net/${iface}/device/driver")
     [[ $(basename "${driver}") =~ "hfi1" ]] && return 0 || return 1
 }
 
 vlan_get_phy() {
     local iface="$1"
     sed -ne "s/^${iface} .*| *//p" < /proc/net/vlan/config
 }
 
 bridge_is_stp_enabled() {
     local iface="$1"
     local stp
     read stp < "/sys/class/net/${iface}/bridge/stp_state"
     [ "${stp}" = "1" ] && return 0 || return 1
 }
 
 bridge_get_root_ports() {
     local bridge="$1"
     local root_id
     local root_ports=""
     local bridge_id
 
     read root_id < "/sys/class/net/${bridge}/bridge/root_id"
 
     for port in /sys/class/net/${bridge}/brif/* ; do
         read bridge_id < "${port}/designated_bridge"
         if [ "${bridge_id}" = "${root_id}" ] ; then
             root_ports="${root_ports} ${port##*/}"
         fi
     done
 
     root_ports=${root_ports# }
 
     if [ -n "$2" ] ; then # Record value in specified var. This expects we were called not in a sub-shell.
         eval "$2=\${root_ports}"
     else # Expect sub-shell
         echo ${root_ports}
     fi
 }
 
 # From /inlude/linux/if_bridge.h:
 #define BR_STATE_DISABLED 0
 #define BR_STATE_LISTENING 1
 #define BR_STATE_LEARNING 2
 #define BR_STATE_FORWARDING 3
 #define BR_STATE_BLOCKING 4
 
 bridge_get_active_ports() {
     local bridge="$1"
     shift 1
     local ports="$*"
     local active_ports=""
     local port_state
     local stp_state
     local warn=0
 
     bridge_is_stp_enabled "${bridge}"
     stp_state=$?
 
     if [ -z "${ports}" ] || [ "${ports}" = "detect" ] ; then
         bridge_get_root_ports "${bridge}" ports
     fi
 
     for port in $ports ; do
         if [ ! -e "/sys/class/net/${bridge}/brif/${port}" ] ; then
             ocf_log warning "Port ${port} doesn't belong to bridge ${bridge}"
             continue
         fi
         read port_state < "/sys/class/net/${bridge}/brif/${port}/state"
         if [ "${port_state}" = "3" ] ; then
             if [ -n "${active_ports}" ] && ${stp_state} ; then
                 warn=1
             fi
             active_ports="${active_ports} ${port}"
         fi
     done
     if [ ${warn} -eq 1 ] ; then
         ocf_log warning "More then one upstream port in bridge '${bridge}' is in forwarding state while STP is enabled: ${active_ports}"
     fi
     echo "${active_ports# }"
 }
 
 bridge_get_speed() {
     local iface="$1"
     local aggregate_speed=0
 
     if ! iface_is_bridge "${iface}" ; then
         echo 0
         return
     fi
 
     BGS_PORTS=$( bridge_get_active_ports "${iface}" "${OCF_RESKEY_bridge_ports}" )
     for port in ${BGS_PORTS} ; do
         : $(( aggregate_speed += $( iface_get_speed "${port}" ) ))
     done
     if [ -n "$2" ] ; then # Record value in specified var. This expects we were called not in a sub-shell.
         eval "$2=\${aggregate_speed}"
     else # Expect sub-shell
         echo ${aggregate_speed}
     fi
 }
 
 hfi1_get_speed() {
     local iface="$1"
     local hfi1_speed
     local hfi1_value
     local hfi1_desc
 
     # Currently (9/14/2017 Intel Omni Path v10.5.0.0.155), Intel doesn't have
     # dual- or multiple-port Host Channel Adapters, and it's safe to use this
     # method to get the speed. Example output:
     # [root@es-host0 ~]# cat /sys/class/net/ib0/device/infiniband/*/ports/*/rate
     # 100 Gb/sec (4X EDR)
     read hfi1_speed hfi1_value hfi1_desc < "/sys/class/net/${iface}/device/infiniband"/*/ports/*/rate
     ocf_is_true "${OCF_RESKEY_debug}" && ocf_log debug "Detected speed $hfi1_speed $hfi1_value $hfi1_desc"
 
     # hfi1_value always in Gb/sec, so we need to convert hfi1_speed in Mb/sec
     echo $(( hfi1_speed * 1000 ))
 }
 
 bond_get_ports() {
     local iface="$1"
     local ports
     read ports < "/sys/class/net/${iface}/bonding/slaves"
     if [ -n "$2" ] ; then # Record value in specified var. This expects we were called not in a sub-shell.
         eval "$2=\${ports}"
     else # Expect sub-shell
         echo ${ports}
     fi
 }
 
 bond_get_active_iface() {
     local iface="$1"
     local active
     read active < "/sys/class/net/${iface}/bonding/active_slave"
     if [ -n "$2" ] ; then # Record value in specified var. This expects we were called not in a sub-shell.
         eval "$2=\${active}"
     else # Expect sub-shell
         echo ${active}
     fi
 }
 
 bond_is_balancing() {
     local iface="$1"
     read mode mode_index < "/sys/class/net/${iface}/bonding/mode"
     ocf_is_true "${OCF_RESKEY_debug}" && ocf_log debug "Detected balancing $mode $mode_index"
     case "${mode}" in
         "balance-rr"|"balance-xor"|"802.3ad"|"balance-tlb"|"balance-alb")
             return 0
             ;;
         *)
             return 1
             ;;
     esac
 }
 
 bond_get_speed() {
     local iface="$1"
     local aggregate_speed=0
     local active_iface
     local bond_ports
 
     if ! iface_is_bond "${iface}" ; then
         echo 0
         return
     fi
 
     bond_get_ports "${iface}" bond_ports
 
     if bond_is_balancing "${iface}" ; then
         for port in ${bond_ports} ; do
             : $(( aggregate_speed += $( iface_get_speed "${port}" ) ))
         done
         # Bonding is unable to get speed*n
         : $(( aggregate_speed = aggregate_speed * 8 / 10 ))
     else
         bond_get_active_iface "${iface}" "active_iface"
         aggregate_speed=$( iface_get_speed "$active_iface" )
     fi
     if [ -n "$2" ] ; then # Record value in specified var. This expects we were called not in a sub-shell.
         eval "$2=\${aggregate_speed}"
     else # Expect sub-shell
         echo ${aggregate_speed}
     fi
 }
 
 update() {
     local speed;
     local nic="${OCF_RESKEY_iface}";
     if [ -z "${OCF_RESKEY_iface}" ]; then
         nic=$( get_nic_name_by_ip )
         if [ -z "${nic}" ];then
             ocf_log err "Could not retrieve network interface name from ip address (${OCF_RESKEY_ip})"
             exit $OCF_ERR_GENERIC
         fi
     fi
     speed=$( iface_get_speed "${nic}" )
 
     : $(( score = speed * ${OCF_RESKEY_weight_base} / 1000 ))
     if [ "$__OCF_ACTION" = "start" ] ; then
         attrd_updater -n "${OCF_RESKEY_name}" -B "${score}" -d "${OCF_RESKEY_dampen}" ${attrd_options}
     else
         attrd_updater -n "${OCF_RESKEY_name}" -v "${score}" -d "${OCF_RESKEY_dampen}" ${attrd_options}
     fi
     rc=$?
     case ${rc} in
         0)
             ocf_is_true "${OCF_RESKEY_debug}" && ocf_log debug "Updated ${OCF_RESKEY_name} = ${score}"
             ;;
         *)
             ocf_log warn "Could not update ${OCF_RESKEY_name} = ${score}: rc=${rc}"
             ;;
     esac
     return ${rc}
 }
 
 case $__OCF_ACTION in
     meta-data)
         meta_data
         exit $OCF_SUCCESS
         ;;
     usage|help)
         usage
         exit $OCF_SUCCESS
         ;;
 esac
 
 if [ "$(uname)" != "Linux" ] ; then
     ocf_log err "This RA works only on linux."
     exit $OCF_ERR_INSTALLED
 fi
 
 : ${ha_pseudo_resource_name:="ifspeed-${OCF_RESOURCE_INSTANCE}"}
 
 attrd_options='-q'
 if ocf_is_true "${OCF_RESKEY_debug}" ; then
     attrd_options=''
 fi
 
 validate || exit $?
 
 case "$__OCF_ACTION" in
     start)
         start
         ;;
     stop)
         stop
         ;;
     monitor)
         monitor
         ;;
     validate-all)
         ;;
     *)
         usage
         exit $OCF_ERR_UNIMPLEMENTED
         ;;
 esac
 
 exit $?
 
 # vim: set filetype=sh expandtab tabstop=4 softtabstop=4 shiftwidth=4 textwidth=80: