diff --git a/daemons/controld/controld_remote_ra.c b/daemons/controld/controld_remote_ra.c index 1f4b7b795f..8408ff3413 100644 --- a/daemons/controld/controld_remote_ra.c +++ b/daemons/controld/controld_remote_ra.c @@ -1,1352 +1,1353 @@ /* * Copyright 2013-2022 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU General Public License version 2 * or later (GPLv2+) WITHOUT ANY WARRANTY. */ #include #include #include #include #include #include #include #include #define REMOTE_LRMD_RA "remote" /* The max start timeout before cmd retry */ #define MAX_START_TIMEOUT_MS 10000 typedef struct remote_ra_cmd_s { /*! the local node the cmd is issued from */ char *owner; /*! the remote node the cmd is executed on */ char *rsc_id; /*! the action to execute */ char *action; /*! some string the client wants us to give it back */ char *userdata; /*! start delay in ms */ int start_delay; /*! timer id used for start delay. */ int delay_id; /*! timeout in ms for cmd */ int timeout; int remaining_timeout; /*! recurring interval in ms */ guint interval_ms; /*! interval timer id */ int interval_id; int reported_success; int monitor_timeout_id; int takeover_timeout_id; /*! action parameters */ lrmd_key_value_t *params; pcmk__action_result_t result; int call_id; time_t start_time; gboolean cancel; } remote_ra_cmd_t; enum remote_migration_status { expect_takeover = 1, takeover_complete, }; typedef struct remote_ra_data_s { crm_trigger_t *work; remote_ra_cmd_t *cur_cmd; GList *cmds; GList *recurring_cmds; enum remote_migration_status migrate_status; gboolean active; /* Maintenance mode is difficult to determine from the controller's context, * so we have it signalled back with the transition from the scheduler. */ gboolean is_maintenance; /* Similar for whether we are controlling a guest node or remote node. * Fortunately there is a meta-attribute in the transition already and * as the situation doesn't change over time we can use the * resource start for noting down the information for later use when * the attributes aren't at hand. */ gboolean controlling_guest; } remote_ra_data_t; static int handle_remote_ra_start(lrm_state_t * lrm_state, remote_ra_cmd_t * cmd, int timeout_ms); static void handle_remote_ra_stop(lrm_state_t * lrm_state, remote_ra_cmd_t * cmd); static GList *fail_all_monitor_cmds(GList * list); static void free_cmd(gpointer user_data) { remote_ra_cmd_t *cmd = user_data; if (!cmd) { return; } if (cmd->delay_id) { g_source_remove(cmd->delay_id); } if (cmd->interval_id) { g_source_remove(cmd->interval_id); } if (cmd->monitor_timeout_id) { g_source_remove(cmd->monitor_timeout_id); } if (cmd->takeover_timeout_id) { g_source_remove(cmd->takeover_timeout_id); } free(cmd->owner); free(cmd->rsc_id); free(cmd->action); free(cmd->userdata); pcmk__reset_result(&(cmd->result)); lrmd_key_value_freeall(cmd->params); free(cmd); } static int generate_callid(void) { static int remote_ra_callid = 0; remote_ra_callid++; if (remote_ra_callid <= 0) { remote_ra_callid = 1; } return remote_ra_callid; } static gboolean recurring_helper(gpointer data) { remote_ra_cmd_t *cmd = data; lrm_state_t *connection_rsc = NULL; cmd->interval_id = 0; connection_rsc = lrm_state_find(cmd->rsc_id); if (connection_rsc && connection_rsc->remote_ra_data) { remote_ra_data_t *ra_data = connection_rsc->remote_ra_data; ra_data->recurring_cmds = g_list_remove(ra_data->recurring_cmds, cmd); ra_data->cmds = g_list_append(ra_data->cmds, cmd); mainloop_set_trigger(ra_data->work); } return FALSE; } static gboolean start_delay_helper(gpointer data) { remote_ra_cmd_t *cmd = data; lrm_state_t *connection_rsc = NULL; cmd->delay_id = 0; connection_rsc = lrm_state_find(cmd->rsc_id); if (connection_rsc && connection_rsc->remote_ra_data) { remote_ra_data_t *ra_data = connection_rsc->remote_ra_data; mainloop_set_trigger(ra_data->work); } return FALSE; } /*! * \internal * \brief Handle cluster communication related to pacemaker_remote node joining * * \param[in] node_name Name of newly integrated pacemaker_remote node */ static void remote_node_up(const char *node_name) { int call_opt, call_id = 0; xmlNode *update, *state; crm_node_t *node; enum controld_section_e section = controld_section_all; CRM_CHECK(node_name != NULL, return); crm_info("Announcing Pacemaker Remote node %s", node_name); /* Clear node's entire state (resource history and transient attributes) * other than shutdown locks. The transient attributes should and normally * will be cleared when the node leaves, but since remote node state has a * number of corner cases, clear them here as well, to be sure. */ call_opt = crmd_cib_smart_opt(); if (controld_shutdown_lock_enabled) { section = controld_section_all_unlocked; } /* Purge node from attrd's memory */ update_attrd_remote_node_removed(node_name, NULL); controld_delete_node_state(node_name, section, call_opt); /* Delete node's probe_complete attribute. This serves two purposes: * * - @COMPAT DCs < 1.1.14 in a rolling upgrade might use it * - deleting it (or any attribute for that matter) here ensures the * attribute manager learns the node is remote */ update_attrd(node_name, CRM_OP_PROBED, NULL, NULL, TRUE); /* Ensure node is in the remote peer cache with member status */ node = crm_remote_peer_get(node_name); CRM_CHECK(node != NULL, return); pcmk__update_peer_state(__func__, node, CRM_NODE_MEMBER, 0); /* pacemaker_remote nodes don't participate in the membership layer, * so cluster nodes don't automatically get notified when they come and go. * We send a cluster message to the DC, and update the CIB node state entry, * so the DC will get it sooner (via message) or later (via CIB refresh), * and any other interested parties can query the CIB. */ send_remote_state_message(node_name, TRUE); update = create_xml_node(NULL, XML_CIB_TAG_STATUS); state = create_node_state_update(node, node_update_cluster, update, __func__); /* Clear the XML_NODE_IS_FENCED flag in the node state. If the node ever * needs to be fenced, this flag will allow various actions to determine * whether the fencing has happened yet. */ crm_xml_add(state, XML_NODE_IS_FENCED, "0"); /* TODO: If the remote connection drops, and this (async) CIB update either * failed or has not yet completed, later actions could mistakenly think the * node has already been fenced (if the XML_NODE_IS_FENCED attribute was * previously set, because it won't have been cleared). This could prevent * actual fencing or allow recurring monitor failures to be cleared too * soon. Ideally, we wouldn't rely on the CIB for the fenced status. */ fsa_cib_update(XML_CIB_TAG_STATUS, update, call_opt, call_id, NULL); if (call_id < 0) { crm_perror(LOG_WARNING, "%s CIB node state setup", node_name); } free_xml(update); } enum down_opts { DOWN_KEEP_LRM, DOWN_ERASE_LRM }; /*! * \internal * \brief Handle cluster communication related to pacemaker_remote node leaving * * \param[in] node_name Name of lost node * \param[in] opts Whether to keep or erase LRM history */ static void remote_node_down(const char *node_name, const enum down_opts opts) { xmlNode *update; int call_id = 0; int call_opt = crmd_cib_smart_opt(); crm_node_t *node; /* Purge node from attrd's memory */ update_attrd_remote_node_removed(node_name, NULL); /* Normally, only node attributes should be erased, and the resource history * should be kept until the node comes back up. However, after a successful * fence, we want to clear the history as well, so we don't think resources * are still running on the node. */ if (opts == DOWN_ERASE_LRM) { controld_delete_node_state(node_name, controld_section_all, call_opt); } else { controld_delete_node_state(node_name, controld_section_attrs, call_opt); } /* Ensure node is in the remote peer cache with lost state */ node = crm_remote_peer_get(node_name); CRM_CHECK(node != NULL, return); pcmk__update_peer_state(__func__, node, CRM_NODE_LOST, 0); /* Notify DC */ send_remote_state_message(node_name, FALSE); /* Update CIB node state */ update = create_xml_node(NULL, XML_CIB_TAG_STATUS); create_node_state_update(node, node_update_cluster, update, __func__); fsa_cib_update(XML_CIB_TAG_STATUS, update, call_opt, call_id, NULL); if (call_id < 0) { crm_perror(LOG_ERR, "%s CIB node state update", node_name); } free_xml(update); } /*! * \internal * \brief Handle effects of a remote RA command on node state * * \param[in] cmd Completed remote RA command */ static void check_remote_node_state(remote_ra_cmd_t *cmd) { /* Only successful actions can change node state */ if (!pcmk__result_ok(&(cmd->result))) { return; } if (pcmk__str_eq(cmd->action, "start", pcmk__str_casei)) { remote_node_up(cmd->rsc_id); } else if (pcmk__str_eq(cmd->action, "migrate_from", pcmk__str_casei)) { /* After a successful migration, we don't need to do remote_node_up() * because the DC already knows the node is up, and we don't want to * clear LRM history etc. We do need to add the remote node to this * host's remote peer cache, because (unless it happens to be DC) * it hasn't been tracking the remote node, and other code relies on * the cache to distinguish remote nodes from unseen cluster nodes. */ crm_node_t *node = crm_remote_peer_get(cmd->rsc_id); CRM_CHECK(node != NULL, return); pcmk__update_peer_state(__func__, node, CRM_NODE_MEMBER, 0); } else if (pcmk__str_eq(cmd->action, "stop", pcmk__str_casei)) { lrm_state_t *lrm_state = lrm_state_find(cmd->rsc_id); remote_ra_data_t *ra_data = lrm_state? lrm_state->remote_ra_data : NULL; if (ra_data) { if (ra_data->migrate_status != takeover_complete) { /* Stop means down if we didn't successfully migrate elsewhere */ remote_node_down(cmd->rsc_id, DOWN_KEEP_LRM); } else if (AM_I_DC == FALSE) { /* Only the connection host and DC track node state, * so if the connection migrated elsewhere and we aren't DC, * un-cache the node, so we don't have stale info */ crm_remote_peer_cache_remove(cmd->rsc_id); } } } /* We don't do anything for successful monitors, which is correct for * routine recurring monitors, and for monitors on nodes where the * connection isn't supposed to be (the cluster will stop the connection in * that case). However, if the initial probe finds the connection already * active on the node where we want it, we probably should do * remote_node_up(). Unfortunately, we can't distinguish that case here. * Given that connections have to be initiated by the cluster, the chance of * that should be close to zero. */ } static void report_remote_ra_result(remote_ra_cmd_t * cmd) { lrmd_event_data_t op = { 0, }; check_remote_node_state(cmd); op.type = lrmd_event_exec_complete; op.rsc_id = cmd->rsc_id; op.op_type = cmd->action; op.user_data = cmd->userdata; op.timeout = cmd->timeout; op.interval_ms = cmd->interval_ms; op.t_run = (unsigned int) cmd->start_time; op.t_rcchange = (unsigned int) cmd->start_time; lrmd__set_result(&op, cmd->result.exit_status, cmd->result.execution_status, cmd->result.exit_reason); if (cmd->reported_success && !pcmk__result_ok(&(cmd->result))) { op.t_rcchange = (unsigned int) time(NULL); /* This edge case will likely never ever occur, but if it does the * result is that a failure will not be processed correctly. This is only * remotely possible because we are able to detect a connection resource's tcp * connection has failed at any moment after start has completed. The actual * recurring operation is just a connectivity ping. * * basically, we are not guaranteed that the first successful monitor op and * a subsequent failed monitor op will not occur in the same timestamp. We have to * make it look like the operations occurred at separate times though. */ if (op.t_rcchange == op.t_run) { op.t_rcchange++; } } if (cmd->params) { lrmd_key_value_t *tmp; op.params = pcmk__strkey_table(free, free); for (tmp = cmd->params; tmp; tmp = tmp->next) { g_hash_table_insert(op.params, strdup(tmp->key), strdup(tmp->value)); } } op.call_id = cmd->call_id; op.remote_nodename = cmd->owner; lrm_op_callback(&op); if (op.params) { g_hash_table_destroy(op.params); } lrmd__reset_result(&op); } static void update_remaining_timeout(remote_ra_cmd_t * cmd) { cmd->remaining_timeout = ((cmd->timeout / 1000) - (time(NULL) - cmd->start_time)) * 1000; } static gboolean retry_start_cmd_cb(gpointer data) { lrm_state_t *lrm_state = data; remote_ra_data_t *ra_data = lrm_state->remote_ra_data; remote_ra_cmd_t *cmd = NULL; int rc = ETIME; if (!ra_data || !ra_data->cur_cmd) { return FALSE; } cmd = ra_data->cur_cmd; if (!pcmk__strcase_any_of(cmd->action, "start", "migrate_from", NULL)) { return FALSE; } update_remaining_timeout(cmd); if (cmd->remaining_timeout > 0) { rc = handle_remote_ra_start(lrm_state, cmd, cmd->remaining_timeout); } else { pcmk__set_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_TIMEOUT, "Not enough time remains to retry remote connection"); } if (rc != pcmk_rc_ok) { report_remote_ra_result(cmd); if (ra_data->cmds) { mainloop_set_trigger(ra_data->work); } ra_data->cur_cmd = NULL; free_cmd(cmd); } else { /* wait for connection event */ } return FALSE; } static gboolean connection_takeover_timeout_cb(gpointer data) { lrm_state_t *lrm_state = NULL; remote_ra_cmd_t *cmd = data; crm_info("takeover event timed out for node %s", cmd->rsc_id); cmd->takeover_timeout_id = 0; lrm_state = lrm_state_find(cmd->rsc_id); handle_remote_ra_stop(lrm_state, cmd); free_cmd(cmd); return FALSE; } static gboolean monitor_timeout_cb(gpointer data) { lrm_state_t *lrm_state = NULL; remote_ra_cmd_t *cmd = data; lrm_state = lrm_state_find(cmd->rsc_id); crm_info("Timed out waiting for remote poke response from %s%s", cmd->rsc_id, (lrm_state? "" : " (no LRM state)")); cmd->monitor_timeout_id = 0; pcmk__set_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_TIMEOUT, "Remote executor did not respond"); if (lrm_state && lrm_state->remote_ra_data) { remote_ra_data_t *ra_data = lrm_state->remote_ra_data; if (ra_data->cur_cmd == cmd) { ra_data->cur_cmd = NULL; } if (ra_data->cmds) { mainloop_set_trigger(ra_data->work); } } report_remote_ra_result(cmd); free_cmd(cmd); if(lrm_state) { lrm_state_disconnect(lrm_state); } return FALSE; } static void synthesize_lrmd_success(lrm_state_t *lrm_state, const char *rsc_id, const char *op_type) { lrmd_event_data_t op = { 0, }; if (lrm_state == NULL) { /* if lrm_state not given assume local */ lrm_state = lrm_state_find(fsa_our_uname); } CRM_ASSERT(lrm_state != NULL); op.type = lrmd_event_exec_complete; op.rsc_id = rsc_id; op.op_type = op_type; op.t_run = (unsigned int) time(NULL); op.t_rcchange = op.t_run; op.call_id = generate_callid(); lrmd__set_result(&op, PCMK_OCF_OK, PCMK_EXEC_DONE, NULL); process_lrm_event(lrm_state, &op, NULL, NULL); } void remote_lrm_op_callback(lrmd_event_data_t * op) { gboolean cmd_handled = FALSE; lrm_state_t *lrm_state = NULL; remote_ra_data_t *ra_data = NULL; remote_ra_cmd_t *cmd = NULL; crm_debug("Processing '%s%s%s' event on remote connection to %s: %s " "(%d) status=%s (%d)", (op->op_type? op->op_type : ""), (op->op_type? " " : ""), lrmd_event_type2str(op->type), op->remote_nodename, services_ocf_exitcode_str(op->rc), op->rc, pcmk_exec_status_str(op->op_status), op->op_status); lrm_state = lrm_state_find(op->remote_nodename); if (!lrm_state || !lrm_state->remote_ra_data) { crm_debug("No state information found for remote connection event"); return; } ra_data = lrm_state->remote_ra_data; if (op->type == lrmd_event_new_client) { // Another client has connected to the remote daemon if (ra_data->migrate_status == expect_takeover) { // Great, we knew this was coming ra_data->migrate_status = takeover_complete; } else { crm_err("Disconnecting from Pacemaker Remote node %s due to " "unexpected client takeover", op->remote_nodename); /* In this case, lrmd_tls_connection_destroy() will be called under the control of mainloop. */ /* Do not free lrm_state->conn yet. */ /* It'll be freed in the following stop action. */ lrm_state_disconnect_only(lrm_state); } return; } /* filter all EXEC events up */ if (op->type == lrmd_event_exec_complete) { if (ra_data->migrate_status == takeover_complete) { crm_debug("ignoring event, this connection is taken over by another node"); } else { lrm_op_callback(op); } return; } if ((op->type == lrmd_event_disconnect) && (ra_data->cur_cmd == NULL)) { if (ra_data->active == FALSE) { crm_debug("Disconnection from Pacemaker Remote node %s complete", lrm_state->node_name); } else if (!remote_ra_is_in_maintenance(lrm_state)) { crm_err("Lost connection to Pacemaker Remote node %s", lrm_state->node_name); ra_data->recurring_cmds = fail_all_monitor_cmds(ra_data->recurring_cmds); ra_data->cmds = fail_all_monitor_cmds(ra_data->cmds); } else { crm_notice("Unmanaged Pacemaker Remote node %s disconnected", lrm_state->node_name); /* Do roughly what a 'stop' on the remote-resource would do */ handle_remote_ra_stop(lrm_state, NULL); remote_node_down(lrm_state->node_name, DOWN_KEEP_LRM); /* now fake the reply of a successful 'stop' */ synthesize_lrmd_success(NULL, lrm_state->node_name, "stop"); } return; } if (!ra_data->cur_cmd) { crm_debug("no event to match"); return; } cmd = ra_data->cur_cmd; /* Start actions and migrate from actions complete after connection * comes back to us. */ if (op->type == lrmd_event_connect && pcmk__strcase_any_of(cmd->action, "start", "migrate_from", NULL)) { if (op->connection_rc < 0) { update_remaining_timeout(cmd); - if (op->connection_rc == -ENOKEY) { + if ((op->connection_rc == -ENOKEY) + || (op->connection_rc == -EKEYREJECTED)) { // Hard error, don't retry pcmk__set_result(&(cmd->result), PCMK_OCF_INVALID_PARAM, PCMK_EXEC_ERROR, - "Authentication key not readable"); + pcmk_strerror(op->connection_rc)); } else if (cmd->remaining_timeout > 3000) { crm_trace("rescheduling start, remaining timeout %d", cmd->remaining_timeout); g_timeout_add(1000, retry_start_cmd_cb, lrm_state); return; } else { crm_trace("can't reschedule start, remaining timeout too small %d", cmd->remaining_timeout); pcmk__format_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_TIMEOUT, "%s without enough time to retry", pcmk_strerror(op->connection_rc)); } } else { lrm_state_reset_tables(lrm_state, TRUE); pcmk__set_result(&(cmd->result), PCMK_OCF_OK, PCMK_EXEC_DONE, NULL); ra_data->active = TRUE; } crm_debug("Remote connection event matched %s action", cmd->action); report_remote_ra_result(cmd); cmd_handled = TRUE; } else if (op->type == lrmd_event_poke && pcmk__str_eq(cmd->action, "monitor", pcmk__str_casei)) { if (cmd->monitor_timeout_id) { g_source_remove(cmd->monitor_timeout_id); cmd->monitor_timeout_id = 0; } /* Only report success the first time, after that only worry about failures. * For this function, if we get the poke pack, it is always a success. Pokes * only fail if the send fails, or the response times out. */ if (!cmd->reported_success) { pcmk__set_result(&(cmd->result), PCMK_OCF_OK, PCMK_EXEC_DONE, NULL); report_remote_ra_result(cmd); cmd->reported_success = 1; } crm_debug("Remote poke event matched %s action", cmd->action); /* success, keep rescheduling if interval is present. */ if (cmd->interval_ms && (cmd->cancel == FALSE)) { ra_data->recurring_cmds = g_list_append(ra_data->recurring_cmds, cmd); cmd->interval_id = g_timeout_add(cmd->interval_ms, recurring_helper, cmd); cmd = NULL; /* prevent free */ } cmd_handled = TRUE; } else if (op->type == lrmd_event_disconnect && pcmk__str_eq(cmd->action, "monitor", pcmk__str_casei)) { if (ra_data->active == TRUE && (cmd->cancel == FALSE)) { pcmk__set_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_ERROR, "Remote connection unexpectedly dropped " "during monitor"); report_remote_ra_result(cmd); crm_err("Remote connection to %s unexpectedly dropped during monitor", lrm_state->node_name); } cmd_handled = TRUE; } else if (op->type == lrmd_event_new_client && pcmk__str_eq(cmd->action, "stop", pcmk__str_casei)) { handle_remote_ra_stop(lrm_state, cmd); cmd_handled = TRUE; } else { crm_debug("Event did not match %s action", ra_data->cur_cmd->action); } if (cmd_handled) { ra_data->cur_cmd = NULL; if (ra_data->cmds) { mainloop_set_trigger(ra_data->work); } free_cmd(cmd); } } static void handle_remote_ra_stop(lrm_state_t * lrm_state, remote_ra_cmd_t * cmd) { remote_ra_data_t *ra_data = NULL; CRM_ASSERT(lrm_state); ra_data = lrm_state->remote_ra_data; if (ra_data->migrate_status != takeover_complete) { /* delete pending ops when ever the remote connection is intentionally stopped */ g_hash_table_remove_all(lrm_state->pending_ops); } else { /* we no longer hold the history if this connection has been migrated, * however, we keep metadata cache for future use */ lrm_state_reset_tables(lrm_state, FALSE); } ra_data->active = FALSE; lrm_state_disconnect(lrm_state); if (ra_data->cmds) { g_list_free_full(ra_data->cmds, free_cmd); } if (ra_data->recurring_cmds) { g_list_free_full(ra_data->recurring_cmds, free_cmd); } ra_data->cmds = NULL; ra_data->recurring_cmds = NULL; ra_data->cur_cmd = NULL; if (cmd) { pcmk__set_result(&(cmd->result), PCMK_OCF_OK, PCMK_EXEC_DONE, NULL); report_remote_ra_result(cmd); } } // \return Standard Pacemaker return code static int handle_remote_ra_start(lrm_state_t * lrm_state, remote_ra_cmd_t * cmd, int timeout_ms) { const char *server = NULL; lrmd_key_value_t *tmp = NULL; int port = 0; remote_ra_data_t *ra_data = lrm_state->remote_ra_data; int timeout_used = timeout_ms > MAX_START_TIMEOUT_MS ? MAX_START_TIMEOUT_MS : timeout_ms; int rc = pcmk_rc_ok; for (tmp = cmd->params; tmp; tmp = tmp->next) { if (pcmk__strcase_any_of(tmp->key, XML_RSC_ATTR_REMOTE_RA_ADDR, XML_RSC_ATTR_REMOTE_RA_SERVER, NULL)) { server = tmp->value; } else if (pcmk__str_eq(tmp->key, XML_RSC_ATTR_REMOTE_RA_PORT, pcmk__str_casei)) { port = atoi(tmp->value); } else if (pcmk__str_eq(tmp->key, CRM_META "_" XML_RSC_ATTR_CONTAINER, pcmk__str_casei)) { ra_data->controlling_guest = TRUE; } } rc = controld_connect_remote_executor(lrm_state, server, port, timeout_used); if (rc != pcmk_rc_ok) { pcmk__format_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_ERROR, "Could not connect to Pacemaker Remote node %s: %s", lrm_state->node_name, pcmk_rc_str(rc)); } return rc; } static gboolean handle_remote_ra_exec(gpointer user_data) { int rc = 0; lrm_state_t *lrm_state = user_data; remote_ra_data_t *ra_data = lrm_state->remote_ra_data; remote_ra_cmd_t *cmd; GList *first = NULL; if (ra_data->cur_cmd) { /* still waiting on previous cmd */ return TRUE; } while (ra_data->cmds) { first = ra_data->cmds; cmd = first->data; if (cmd->delay_id) { /* still waiting for start delay timer to trip */ return TRUE; } ra_data->cmds = g_list_remove_link(ra_data->cmds, first); g_list_free_1(first); if (!strcmp(cmd->action, "start") || !strcmp(cmd->action, "migrate_from")) { ra_data->migrate_status = 0; if (handle_remote_ra_start(lrm_state, cmd, cmd->timeout) == pcmk_rc_ok) { /* take care of this later when we get async connection result */ crm_debug("Initiated async remote connection, %s action will complete after connect event", cmd->action); ra_data->cur_cmd = cmd; return TRUE; } report_remote_ra_result(cmd); } else if (!strcmp(cmd->action, "monitor")) { if (lrm_state_is_connected(lrm_state) == TRUE) { rc = lrm_state_poke_connection(lrm_state); if (rc < 0) { pcmk__set_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_ERROR, pcmk_strerror(rc)); } } else { rc = -1; pcmk__set_result(&(cmd->result), PCMK_OCF_NOT_RUNNING, PCMK_EXEC_DONE, "Remote connection inactive"); } if (rc == 0) { crm_debug("Poked Pacemaker Remote at node %s, waiting for async response", cmd->rsc_id); ra_data->cur_cmd = cmd; cmd->monitor_timeout_id = g_timeout_add(cmd->timeout, monitor_timeout_cb, cmd); return TRUE; } report_remote_ra_result(cmd); } else if (!strcmp(cmd->action, "stop")) { if (ra_data->migrate_status == expect_takeover) { /* briefly wait on stop for the takeover event to occur. If the * takeover event does not occur during the wait period, that's fine. * It just means that the remote-node's lrm_status section is going to get * cleared which will require all the resources running in the remote-node * to be explicitly re-detected via probe actions. If the takeover does occur * successfully, then we can leave the status section intact. */ cmd->takeover_timeout_id = g_timeout_add((cmd->timeout/2), connection_takeover_timeout_cb, cmd); ra_data->cur_cmd = cmd; return TRUE; } handle_remote_ra_stop(lrm_state, cmd); } else if (!strcmp(cmd->action, "migrate_to")) { ra_data->migrate_status = expect_takeover; pcmk__set_result(&(cmd->result), PCMK_OCF_OK, PCMK_EXEC_DONE, NULL); report_remote_ra_result(cmd); } else if (pcmk__str_any_of(cmd->action, CRMD_ACTION_RELOAD, CRMD_ACTION_RELOAD_AGENT, NULL)) { /* Currently the only reloadable parameter is reconnect_interval, * which is only used by the scheduler via the CIB, so reloads are a * no-op. * * @COMPAT DC <2.1.0: We only need to check for "reload" in case * we're in a rolling upgrade with a DC scheduling "reload" instead * of "reload-agent". An OCF 1.1 "reload" would be a no-op anyway, * so this would work for that purpose as well. */ pcmk__set_result(&(cmd->result), PCMK_OCF_OK, PCMK_EXEC_DONE, NULL); report_remote_ra_result(cmd); } free_cmd(cmd); } return TRUE; } static void remote_ra_data_init(lrm_state_t * lrm_state) { remote_ra_data_t *ra_data = NULL; if (lrm_state->remote_ra_data) { return; } ra_data = calloc(1, sizeof(remote_ra_data_t)); ra_data->work = mainloop_add_trigger(G_PRIORITY_HIGH, handle_remote_ra_exec, lrm_state); lrm_state->remote_ra_data = ra_data; } void remote_ra_cleanup(lrm_state_t * lrm_state) { remote_ra_data_t *ra_data = lrm_state->remote_ra_data; if (!ra_data) { return; } if (ra_data->cmds) { g_list_free_full(ra_data->cmds, free_cmd); } if (ra_data->recurring_cmds) { g_list_free_full(ra_data->recurring_cmds, free_cmd); } mainloop_destroy_trigger(ra_data->work); free(ra_data); lrm_state->remote_ra_data = NULL; } gboolean is_remote_lrmd_ra(const char *agent, const char *provider, const char *id) { if (agent && provider && !strcmp(agent, REMOTE_LRMD_RA) && !strcmp(provider, "pacemaker")) { return TRUE; } if (id && lrm_state_find(id) && !pcmk__str_eq(id, fsa_our_uname, pcmk__str_casei)) { return TRUE; } return FALSE; } lrmd_rsc_info_t * remote_ra_get_rsc_info(lrm_state_t * lrm_state, const char *rsc_id) { lrmd_rsc_info_t *info = NULL; if ((lrm_state_find(rsc_id))) { info = calloc(1, sizeof(lrmd_rsc_info_t)); info->id = strdup(rsc_id); info->type = strdup(REMOTE_LRMD_RA); info->standard = strdup(PCMK_RESOURCE_CLASS_OCF); info->provider = strdup("pacemaker"); } return info; } static gboolean is_remote_ra_supported_action(const char *action) { return pcmk__str_any_of(action, CRMD_ACTION_START, CRMD_ACTION_STOP, CRMD_ACTION_STATUS, CRMD_ACTION_MIGRATE, CRMD_ACTION_MIGRATED, CRMD_ACTION_RELOAD_AGENT, CRMD_ACTION_RELOAD, NULL); } static GList * fail_all_monitor_cmds(GList * list) { GList *rm_list = NULL; remote_ra_cmd_t *cmd = NULL; GList *gIter = NULL; for (gIter = list; gIter != NULL; gIter = gIter->next) { cmd = gIter->data; if ((cmd->interval_ms > 0) && pcmk__str_eq(cmd->action, "monitor", pcmk__str_casei)) { rm_list = g_list_append(rm_list, cmd); } } for (gIter = rm_list; gIter != NULL; gIter = gIter->next) { cmd = gIter->data; pcmk__set_result(&(cmd->result), PCMK_OCF_UNKNOWN_ERROR, PCMK_EXEC_ERROR, "Lost connection to remote executor"); crm_trace("Pre-emptively failing %s %s (interval=%u, %s)", cmd->action, cmd->rsc_id, cmd->interval_ms, cmd->userdata); report_remote_ra_result(cmd); list = g_list_remove(list, cmd); free_cmd(cmd); } /* frees only the list data, not the cmds */ g_list_free(rm_list); return list; } static GList * remove_cmd(GList * list, const char *action, guint interval_ms) { remote_ra_cmd_t *cmd = NULL; GList *gIter = NULL; for (gIter = list; gIter != NULL; gIter = gIter->next) { cmd = gIter->data; if ((cmd->interval_ms == interval_ms) && pcmk__str_eq(cmd->action, action, pcmk__str_casei)) { break; } cmd = NULL; } if (cmd) { list = g_list_remove(list, cmd); free_cmd(cmd); } return list; } int remote_ra_cancel(lrm_state_t *lrm_state, const char *rsc_id, const char *action, guint interval_ms) { lrm_state_t *connection_rsc = NULL; remote_ra_data_t *ra_data = NULL; connection_rsc = lrm_state_find(rsc_id); if (!connection_rsc || !connection_rsc->remote_ra_data) { return -EINVAL; } ra_data = connection_rsc->remote_ra_data; ra_data->cmds = remove_cmd(ra_data->cmds, action, interval_ms); ra_data->recurring_cmds = remove_cmd(ra_data->recurring_cmds, action, interval_ms); if (ra_data->cur_cmd && (ra_data->cur_cmd->interval_ms == interval_ms) && (pcmk__str_eq(ra_data->cur_cmd->action, action, pcmk__str_casei))) { ra_data->cur_cmd->cancel = TRUE; } return 0; } static remote_ra_cmd_t * handle_dup_monitor(remote_ra_data_t *ra_data, guint interval_ms, const char *userdata) { GList *gIter = NULL; remote_ra_cmd_t *cmd = NULL; /* there are 3 places a potential duplicate monitor operation * could exist. * 1. recurring_cmds list. where the op is waiting for its next interval * 2. cmds list, where the op is queued to get executed immediately * 3. cur_cmd, which means the monitor op is in flight right now. */ if (interval_ms == 0) { return NULL; } if (ra_data->cur_cmd && ra_data->cur_cmd->cancel == FALSE && (ra_data->cur_cmd->interval_ms == interval_ms) && pcmk__str_eq(ra_data->cur_cmd->action, "monitor", pcmk__str_casei)) { cmd = ra_data->cur_cmd; goto handle_dup; } for (gIter = ra_data->recurring_cmds; gIter != NULL; gIter = gIter->next) { cmd = gIter->data; if ((cmd->interval_ms == interval_ms) && pcmk__str_eq(cmd->action, "monitor", pcmk__str_casei)) { goto handle_dup; } } for (gIter = ra_data->cmds; gIter != NULL; gIter = gIter->next) { cmd = gIter->data; if ((cmd->interval_ms == interval_ms) && pcmk__str_eq(cmd->action, "monitor", pcmk__str_casei)) { goto handle_dup; } } return NULL; handle_dup: crm_trace("merging duplicate monitor cmd " PCMK__OP_FMT, cmd->rsc_id, "monitor", interval_ms); /* update the userdata */ if (userdata) { free(cmd->userdata); cmd->userdata = strdup(userdata); } /* if we've already reported success, generate a new call id */ if (cmd->reported_success) { cmd->start_time = time(NULL); cmd->call_id = generate_callid(); cmd->reported_success = 0; } /* if we have an interval_id set, that means we are in the process of * waiting for this cmd's next interval. instead of waiting, cancel * the timer and execute the action immediately */ if (cmd->interval_id) { g_source_remove(cmd->interval_id); cmd->interval_id = 0; recurring_helper(cmd); } return cmd; } /*! * \internal * \brief Execute an action using the (internal) ocf:pacemaker:remote agent * * \param[in] lrm_state Executor state object for remote connection * \param[in] rsc_id Connection resource ID * \param[in] action Action to execute * \param[in] userdata String to copy and pass to execution callback * \param[in] interval_ms Action interval (in milliseconds) * \param[in] timeout_ms Action timeout (in milliseconds) * \param[in] start_delay_ms Delay (in milliseconds) before initiating action * \param[in] params Connection resource parameters * \param[out] call_id Where to store call ID on success * * \return Standard Pacemaker return code * \note This takes ownership of \p params, which should not be used or freed * after calling this function. */ int controld_execute_remote_agent(lrm_state_t *lrm_state, const char *rsc_id, const char *action, const char *userdata, guint interval_ms, int timeout_ms, int start_delay_ms, lrmd_key_value_t *params, int *call_id) { lrm_state_t *connection_rsc = NULL; remote_ra_cmd_t *cmd = NULL; remote_ra_data_t *ra_data = NULL; *call_id = 0; CRM_CHECK((lrm_state != NULL) && (rsc_id != NULL) && (action != NULL) && (userdata != NULL) && (call_id != NULL), lrmd_key_value_freeall(params); return EINVAL); if (!is_remote_ra_supported_action(action)) { lrmd_key_value_freeall(params); return EOPNOTSUPP; } connection_rsc = lrm_state_find(rsc_id); if (connection_rsc == NULL) { lrmd_key_value_freeall(params); return ENOTCONN; } remote_ra_data_init(connection_rsc); ra_data = connection_rsc->remote_ra_data; cmd = handle_dup_monitor(ra_data, interval_ms, userdata); if (cmd) { *call_id = cmd->call_id; lrmd_key_value_freeall(params); return pcmk_rc_ok; } cmd = calloc(1, sizeof(remote_ra_cmd_t)); if (cmd == NULL) { lrmd_key_value_freeall(params); return ENOMEM; } cmd->owner = strdup(lrm_state->node_name); cmd->rsc_id = strdup(rsc_id); cmd->action = strdup(action); cmd->userdata = strdup(userdata); if ((cmd->owner == NULL) || (cmd->rsc_id == NULL) || (cmd->action == NULL) || (cmd->userdata == NULL)) { free_cmd(cmd); lrmd_key_value_freeall(params); return ENOMEM; } cmd->interval_ms = interval_ms; cmd->timeout = timeout_ms; cmd->start_delay = start_delay_ms; cmd->params = params; cmd->start_time = time(NULL); cmd->call_id = generate_callid(); if (cmd->start_delay) { cmd->delay_id = g_timeout_add(cmd->start_delay, start_delay_helper, cmd); } ra_data->cmds = g_list_append(ra_data->cmds, cmd); mainloop_set_trigger(ra_data->work); *call_id = cmd->call_id; return pcmk_rc_ok; } /*! * \internal * \brief Immediately fail all monitors of a remote node, if proxied here * * \param[in] node_name Name of pacemaker_remote node */ void remote_ra_fail(const char *node_name) { lrm_state_t *lrm_state = lrm_state_find(node_name); if (lrm_state && lrm_state_is_connected(lrm_state)) { remote_ra_data_t *ra_data = lrm_state->remote_ra_data; crm_info("Failing monitors on Pacemaker Remote node %s", node_name); ra_data->recurring_cmds = fail_all_monitor_cmds(ra_data->recurring_cmds); ra_data->cmds = fail_all_monitor_cmds(ra_data->cmds); } } /* A guest node fencing implied by host fencing looks like: * * * * * * * */ #define XPATH_PSEUDO_FENCE "//" XML_GRAPH_TAG_PSEUDO_EVENT \ "[@" XML_LRM_ATTR_TASK "='stonith']/" XML_GRAPH_TAG_DOWNED \ "/" XML_CIB_TAG_NODE /*! * \internal * \brief Check a pseudo-action for Pacemaker Remote node side effects * * \param[in] xml XML of pseudo-action to check */ void remote_ra_process_pseudo(xmlNode *xml) { xmlXPathObjectPtr search = xpath_search(xml, XPATH_PSEUDO_FENCE); if (numXpathResults(search) == 1) { xmlNode *result = getXpathResult(search, 0); /* Normally, we handle the necessary side effects of a guest node stop * action when reporting the remote agent's result. However, if the stop * is implied due to fencing, it will be a fencing pseudo-event, and * there won't be a result to report. Handle that case here. * * This will result in a duplicate call to remote_node_down() if the * guest stop was real instead of implied, but that shouldn't hurt. * * There is still one corner case that isn't handled: if a guest node * isn't running any resources when its host is fenced, it will appear * to be cleanly stopped, so there will be no pseudo-fence, and our * peer cache state will be incorrect unless and until the guest is * recovered. */ if (result) { const char *remote = ID(result); if (remote) { remote_node_down(remote, DOWN_ERASE_LRM); } } } freeXpathObject(search); } static void remote_ra_maintenance(lrm_state_t * lrm_state, gboolean maintenance) { remote_ra_data_t *ra_data = lrm_state->remote_ra_data; xmlNode *update, *state; int call_opt, call_id = 0; crm_node_t *node; call_opt = crmd_cib_smart_opt(); node = crm_remote_peer_get(lrm_state->node_name); CRM_CHECK(node != NULL, return); update = create_xml_node(NULL, XML_CIB_TAG_STATUS); state = create_node_state_update(node, node_update_none, update, __func__); crm_xml_add(state, XML_NODE_IS_MAINTENANCE, maintenance?"1":"0"); fsa_cib_update(XML_CIB_TAG_STATUS, update, call_opt, call_id, NULL); if (call_id < 0) { crm_perror(LOG_WARNING, "%s CIB node state update failed", lrm_state->node_name); } else { /* TODO: still not 100% sure that async update will succeed ... */ ra_data->is_maintenance = maintenance; } free_xml(update); } #define XPATH_PSEUDO_MAINTENANCE "//" XML_GRAPH_TAG_PSEUDO_EVENT \ "[@" XML_LRM_ATTR_TASK "='" CRM_OP_MAINTENANCE_NODES "']/" \ XML_GRAPH_TAG_MAINTENANCE /*! * \internal * \brief Check a pseudo-action holding updates for maintenance state * * \param[in] xml XML of pseudo-action to check */ void remote_ra_process_maintenance_nodes(xmlNode *xml) { xmlXPathObjectPtr search = xpath_search(xml, XPATH_PSEUDO_MAINTENANCE); if (numXpathResults(search) == 1) { xmlNode *node; int cnt = 0, cnt_remote = 0; for (node = first_named_child(getXpathResult(search, 0), XML_CIB_TAG_NODE); node != NULL; node = pcmk__xml_next(node)) { lrm_state_t *lrm_state = lrm_state_find(ID(node)); cnt++; if (lrm_state && lrm_state->remote_ra_data && ((remote_ra_data_t *) lrm_state->remote_ra_data)->active) { int is_maint; cnt_remote++; pcmk__scan_min_int(crm_element_value(node, XML_NODE_IS_MAINTENANCE), &is_maint, 0); remote_ra_maintenance(lrm_state, is_maint); } } crm_trace("Action holds %d nodes (%d remotes found) " "adjusting maintenance-mode", cnt, cnt_remote); } freeXpathObject(search); } gboolean remote_ra_is_in_maintenance(lrm_state_t * lrm_state) { remote_ra_data_t *ra_data = lrm_state->remote_ra_data; return ra_data->is_maintenance; } gboolean remote_ra_controlling_guest(lrm_state_t * lrm_state) { remote_ra_data_t *ra_data = lrm_state->remote_ra_data; return ra_data->controlling_guest; }