diff --git a/crm/test/README b/crm/test/README
deleted file mode 100644
index 340df0ba25..0000000000
--- a/crm/test/README
+++ /dev/null
@@ -1,99 +0,0 @@
-#
-# Copyright (C) 2004 Andrew Beekhof  <andrew@beekhof.net>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-
-Disclaimer: 
-#############
-
-    This is not a proper cluster test suite and is intended mainly for the use
-     of the developer and as a quickstart guide for those with nothing better
-     to do.  
-
-    Some of the requirements and methods in these tests are highly dubious and
-     insecure.  
-
-    If you dont feel comfortable with the implications of these scripts, I
-     suggest you wait for the proper test suite.
-
-    I reserve the right to break any and all of this at any stage :) 
-
-
-
-Pre-reqs:
-#############
-
-    Basic requirement
-    =======================
-    	Configure and compile Heartbeat with --enable-crm
-
-    Basic requirement
-    =======================
-	Ability to log in via ssh to all nodes without a password.
-
-    Extra-info
-	By default the following accounts are used:
-	   INIT_USER  = root   (start and stop heartbeat via init script)
-	   CRMD_USER  = root   (start and stop crmd executable)
-	   ADMIN_USER = root   (run crmd admin commands)
-
-	Of course feel free to set up your ha.cf differently and login as
-	whoever you like, just be sure to change the above values in helper.sh
-
-	I also needed to change the shell for the hacluster users from
-	 /bin/false to /bin/bash on SuSE.
-
-    Basic requirement
-    =======================
-    	Set up remote logging to the node you are running the tests from.
-	On this server you should log LOCAL7 (info and higher) to a separate
-	 file.  You should then specify this file on the command-line to
-	 Xnode.sh as "-l /your/log.file" 
-
-    Extra-info
-	Log messages must use the same values as uname -n, not the fully
-	qualified version.
-
-	"test1 heartbeat" == GOOD
-	"test1.your.domain heartbeat" == BAD 
-
-    Basic requirement
-    =======================
-    	Set up 3 nodes called test1, test2 and test3 on a 10.0.6.x subnet (for the IPaddr resource)
-
-    Extra-info
-	You can use different names by specifying --node1 <node> and --node2  <node> on the testing command line.
-	Changing the IPs can be done with --ip1 and --ip2.
-
-    Basic requirement
-    =======================
-    	Set up ha.cf according to the wiki: ClusterResourceManager/Setup
-	The one exception is that crmd should not be started by default.
-	At this time, the use of ha_logd is not supported.  This should
-	  change soon.
-	
-    Basic requirement
-    =======================
-    	Heartbeat should not be started by default
-
-I think thats about it... 
- Now just run ./1node.sh and ./2node.sh, they should report if anything went
- wrong.  Try running with -v to get a running log of what the tests are doing. 
-
-
-Please send all feedback via the -dev list.
-
-- Andrew