diff --git a/doc/Pacemaker_Explained/en-US/Ch-Advanced-Resources.txt b/doc/Pacemaker_Explained/en-US/Ch-Advanced-Resources.txt index c41be61a6f..9a358aed2f 100644 --- a/doc/Pacemaker_Explained/en-US/Ch-Advanced-Resources.txt +++ b/doc/Pacemaker_Explained/en-US/Ch-Advanced-Resources.txt @@ -1,1455 +1,1455 @@ :compat-mode: legacy = Advanced Resource Types = [[group-resources]] == Groups - A Syntactic Shortcut == indexterm:[Group Resources] indexterm:[Resource,Groups] One of the most common elements of a cluster is a set of resources that need to be located together, start sequentially, and stop in the reverse order. To simplify this configuration, we support the concept of groups. .A group of two primitive resources ====== [source,XML] ------- ------- ====== Although the example above contains only two resources, there is no limit to the number of resources a group can contain. The example is also sufficient to explain the fundamental properties of a group: * Resources are started in the order they appear in (+Public-IP+ first, then +Email+) * Resources are stopped in the reverse order to which they appear in (+Email+ first, then +Public-IP+) If a resource in the group can't run anywhere, then nothing after that is allowed to run, too. * If +Public-IP+ can't run anywhere, neither can +Email+; * but if +Email+ can't run anywhere, this does not affect +Public-IP+ in any way The group above is logically equivalent to writing: .How the cluster sees a group resource ====== [source,XML] ------- ------- ====== Obviously as the group grows bigger, the reduced configuration effort can become significant. Another (typical) example of a group is a DRBD volume, the filesystem mount, an IP address, and an application that uses them. === Group Properties === .Properties of a Group Resource [width="95%",cols="3m,<5",options="header",align="center"] |========================================================= |Field |Description |id |A unique name for the group indexterm:[id,Group Resource Property] indexterm:[Resource,Group Property,id] |========================================================= === Group Options === Groups inherit the +priority+, +target-role+, and +is-managed+ properties from primitive resources. See <> for information about those properties. === Group Instance Attributes === Groups have no instance attributes. However, any that are set for the group object will be inherited by the group's children. === Group Contents === Groups may only contain a collection of cluster resources (see <>). To refer to a child of a group resource, just use the child's +id+ instead of the group's. === Group Constraints === Although it is possible to reference a group's children in constraints, it is usually preferable to reference the group itself. .Some constraints involving groups ====== [source,XML] ------- ------- ====== === Group Stickiness === indexterm:[resource-stickiness,Groups] Stickiness, the measure of how much a resource wants to stay where it is, is additive in groups. Every active resource of the group will contribute its stickiness value to the group's total. So if the default +resource-stickiness+ is 100, and a group has seven members, five of which are active, then the group as a whole will prefer its current location with a score of 500. [[s-resource-clone]] == Clones - Resources That Can Have Multiple Active Instances == indexterm:[Clone Resources] indexterm:[Resource,Clones] 'Clone' resources are resources that can have more than one copy active at the same time. This allows you, for example, to run a copy of a daemon on every node. You can clone any primitive or group resource. footnote:[ Of course, the service must support running multiple instances. ] === Anonymous versus Unique Clones === A clone resource is configured to be either 'anonymous' or 'globally unique'. Anonymous clones are the simplest. These behave completely identically everywhere they are running. Because of this, there can be only one instance of an anonymous clone active per node. The instances of globally unique clones are distinct entities. All instances are launched identically, but one instance of the clone is not identical to any other instance, whether running on the same node or a different node. As an example, a cloned IP address can use special kernel functionality such that each instance handles a subset of requests for the same IP address. [[s-resource-promotable]] === Promotable clones === indexterm:[Promotable Clone Resources] indexterm:[Resource,Promotable] If a clone is 'promotable', its instances can perform a special role that Pacemaker will manage via the +promote+ and +demote+ actions of the resource agent. Services that support such a special role have various terms for the special role and the default role: primary and secondary, master and replica, controller and worker, etc. Pacemaker uses the terms 'master' and 'slave', footnote:[ These are historical terms that will eventually be replaced, but the extensive use of them and the need for backward compatibility makes it a long process. You may see examples using a +master+ tag instead of a +clone+ tag with the +promotable+ meta-attribute set to +true+; the +master+ tag is supported, but deprecated, and will be removed in a future version. You may also see such services referred to as 'multi-state' or 'stateful'; these means the same thing as 'promotable'. ] but is agnostic to what the service calls them or what they do. All that Pacemaker cares about is that an instance comes up in the default role when started, and the resource agent supports the +promote+ and +demote+ actions to manage entering and exiting the special role. === Clone Properties === .Properties of a Clone Resource [width="95%",cols="3m,<5",options="header",align="center"] |========================================================= |Field |Description |id |A unique name for the clone indexterm:[id,Clone Property] indexterm:[Clone,Property,id] |========================================================= === Clone Options === <> inherited from primitive resources: +priority, target-role, is-managed+ .Clone-specific configuration options [width="95%",cols="1m,1,<3",options="header",align="center"] |========================================================= |Field |Default |Description |globally-unique |false |If +true+, each clone instance performs a distinct function indexterm:[globally-unique,Clone Option] indexterm:[Clone,Option,globally-unique] |clone-max |number of nodes in cluster |The maximum number of clone instances that can be started across the entire cluster indexterm:[clone-max,Clone Option] indexterm:[Clone,Option,clone-max] |clone-node-max |1 |If +globally-unique+ is +true+, the maximum number of clone instances that can be started on a single node indexterm:[clone-node-max,Clone Option] indexterm:[Clone,Option,clone-node-max] |clone-min |0 |Require at least this number of clone instances to be runnable before allowing resources depending on the clone to be runnable. A value of 0 means require all clone instances to be runnable. indexterm:[clone-min,Clone Option] indexterm:[Clone,Option,clone-min] |notify |false |Call the resource agent's +notify+ action for all active instances, before and after starting or stopping any clone instance. The resource agent must support this action. Allowed values: +false+, +true+ indexterm:[notify,Clone Option] indexterm:[Clone,Option,notify] |ordered |false |If +true+, clone instances must be started sequentially instead of in parallel Allowed values: +false+, +true+ indexterm:[ordered,Clone Option] indexterm:[Clone,Option,ordered] |interleave |false |When this clone is ordered relative to another clone, if this option is +false+ (the default), the ordering is relative to 'all' instances of the other clone, whereas if this option is +true+, the ordering is relative only to instances on the same node. Allowed values: +false+, +true+ indexterm:[interleave,Clone Option] indexterm:[Clone,Option,interleave] |promotable |false |If +true+, clone instances can perform a special role that Pacemaker will manage via the resource agent's +promote+ and +demote+ actions. The resource agent must support these actions. Allowed values: +false+, +true+ indexterm:[promotable,Clone Option] indexterm:[Clone,Option,promotable] |promoted-max |1 |If +promotable+ is +true+, the number of instances that can be promoted at one time across the entire cluster indexterm:[promoted-max,Clone Option] indexterm:[Clone,Option,promoted-max] |promoted-node-max |1 |If +promotable+ is +true+ and +globally-unique+ is +false+, the number of clone instances can be promoted at one time on a single node indexterm:[promoted-node-max,Clone Option] indexterm:[Clone,Option,promoted-node-max] |========================================================= For backward compatibility, +master-max+ and +master-node-max+ are accepted as aliases for +promoted-max+ and +promoted-node-max+, but are deprecated since 2.0.0, and support for them will be removed in a future version. === Clone Contents === Clones must contain exactly one primitive or group resource. .A clone that runs a web server on all nodes ==== [source,XML] ---- ---- ==== [WARNING] You should never reference the name of a clone's child (the primitive or group resource being cloned). If you think you need to do this, you probably need to re-evaluate your design. === Clone Instance Attributes === Clones have no instance attributes; however, any that are set here will be inherited by the clone's child. === Clone Constraints === In most cases, a clone will have a single instance on each active cluster node. If this is not the case, you can indicate which nodes the cluster should preferentially assign copies to with resource location constraints. These constraints are written no differently from those for primitive resources except that the clone's +id+ is used. .Some constraints involving clones ====== [source,XML] ------- ------- ====== Ordering constraints behave slightly differently for clones. In the example above, +apache-stats+ will wait until all copies of +apache-clone+ that need to be started have done so before being started itself. Only if _no_ copies can be started will +apache-stats+ be prevented from being active. Additionally, the clone will wait for +apache-stats+ to be stopped before stopping itself. Colocation of a primitive or group resource with a clone means that the resource can run on any node with an active instance of the clone. The cluster will choose an instance based on where the clone is running and the resource's own location preferences. Colocation between clones is also possible. If one clone +A+ is colocated with another clone +B+, the set of allowed locations for +A+ is limited to nodes on which +B+ is (or will be) active. Placement is then performed normally. ==== Promotable Clone Constraints ==== For promotable clone resources, the +first-action+ and/or +then-action+ fields for ordering constraints may be set to +promote+ or +demote+ to constrain the master role, and colocation constraints may contain +rsc-role+ and/or +with-rsc-role+ fields. .Additional colocation constraint options for promotable clone resources [width="95%",cols="1m,1,<3",options="header",align="center"] |========================================================= |Field |Default |Description |rsc-role |Started |An additional attribute of colocation constraints that specifies the role that +rsc+ must be in. Allowed values: +Started+, +Master+, +Slave+. indexterm:[rsc-role,Ordering Constraints] indexterm:[Constraints,Ordering,rsc-role] |with-rsc-role |Started |An additional attribute of colocation constraints that specifies the role that +with-rsc+ must be in. Allowed values: +Started+, +Master+, +Slave+. indexterm:[with-rsc-role,Ordering Constraints] indexterm:[Constraints,Ordering,with-rsc-role] |========================================================= .Constraints involving promotable clone resources ====== [source,XML] ------- ------- ====== In the example above, +myApp+ will wait until one of the database copies has been started and promoted to master before being started itself on the same node. Only if no copies can be promoted will +myApp+ be prevented from being active. Additionally, the cluster will wait for +myApp+ to be stopped before demoting the database. Colocation of a primitive or group resource with a promotable clone resource means that it can run on any node with an active instance of the promotable clone resource that has the specified role (+master+ or +slave+). In the example above, the cluster will choose a location based on where database is running as a +master+, and if there are multiple +master+ instances it will also factor in +myApp+'s own location preferences when deciding which location to choose. Colocation with regular clones and other promotable clone resources is also possible. In such cases, the set of allowed locations for the +rsc+ clone is (after role filtering) limited to nodes on which the +with-rsc+ promotable clone resource is (or will be) in the specified role. Placement is then performed as normal. ==== Using Promotable Clone Resources in Colocation Sets ==== .Additional colocation set options relevant to promotable clone resources [width="95%",cols="1m,1,<6",options="header",align="center"] |========================================================= |Field |Default |Description |role |Started |The role that 'all members' of the set must be in. Allowed values: +Started+, +Master+, +Slave+. indexterm:[role,Ordering Constraints] indexterm:[Constraints,Ordering,role] |========================================================= In the following example +B+'s master must be located on the same node as +A+'s master. Additionally resources +C+ and +D+ must be located on the same node as +A+'s and +B+'s masters. .Colocate C and D with A's and B's master instances ====== [source,XML] ------- ------- ====== ==== Using Promotable Clone Resources in Ordered Sets ==== .Additional ordered set options relevant to promotable clone resources [width="95%",cols="1m,1,<3",options="header",align="center"] |========================================================= |Field |Default |Description |action |value of +first-action+ |An additional attribute of ordering constraint sets that specifies the action that applies to 'all members' of the set. Allowed values: +start+, +stop+, +promote+, +demote+. indexterm:[action,Ordering Constraints] indexterm:[Constraints,Ordering,action] |========================================================= .Start C and D after first promoting A and B ====== [source,XML] ------- ------- ====== In the above example, +B+ cannot be promoted to a master role until +A+ has been promoted. Additionally, resources +C+ and +D+ must wait until +A+ and +B+ have been promoted before they can start. [[s-clone-stickiness]] === Clone Stickiness === indexterm:[resource-stickiness,Clones] To achieve a stable allocation pattern, clones are slightly sticky by default. If no value for +resource-stickiness+ is provided, the clone will use a value of 1. Being a small value, it causes minimal disturbance to the score calculations of other resources but is enough to prevent Pacemaker from needlessly moving copies around the cluster. [NOTE] ==== For globally unique clones, this may result in multiple instances of the clone staying on a single node, even after another eligible node becomes active (for example, after being put into standby mode then made active again). If you do not want this behavior, specify a +resource-stickiness+ of 0 for the clone temporarily and let the cluster adjust, then set it back to 1 if you want the default behavior to apply again. ==== === Clone Resource Agent Requirements === Any resource can be used as an anonymous clone, as it requires no additional support from the resource agent. Whether it makes sense to do so depends on your resource and its resource agent. ==== Resource Agent Requirements for Globally Unique Clones ==== Globally unique clones require additional support in the resource agent. In particular, it must only respond with +$\{OCF_SUCCESS}+ if the node has that exact instance active. All other probes for instances of the clone should result in +$\{OCF_NOT_RUNNING}+ (or one of the other OCF error codes if they are failed). Individual instances of a clone are identified by appending a colon and a numerical offset, e.g. +apache:2+. Resource agents can find out how many copies there are by examining the +OCF_RESKEY_CRM_meta_clone_max+ environment variable and which instance it is by examining +OCF_RESKEY_CRM_meta_clone+. The resource agent must not make any assumptions (based on +OCF_RESKEY_CRM_meta_clone+) about which numerical instances are active. In particular, the list of active copies will not always be an unbroken sequence, nor always start at 0. ==== Resource Agent Requirements for Promotable Clones ==== Promotable clone resources require two extra actions, +demote+ and +promote+, which are responsible for changing the state of the resource. Like +start+ and +stop+, they should return +$\{OCF_SUCCESS}+ if they completed successfully or a relevant error code if they did not. The states can mean whatever you wish, but when the resource is started, it must come up in the mode called +slave+. From there the cluster will decide which instances to promote to +master+. In addition to the clone requirements for monitor actions, agents must also _accurately_ report which state they are in. The cluster relies on the agent to report its status (including role) accurately and does not indicate to the agent what role it currently believes it to be in. .Role implications of OCF return codes [width="95%",cols="1,<1",options="header",align="center"] |========================================================= |Monitor Return Code |Description |OCF_NOT_RUNNING |Stopped indexterm:[Return Code,OCF_NOT_RUNNING] |OCF_SUCCESS |Running (Slave) indexterm:[Return Code,OCF_SUCCESS] |OCF_RUNNING_MASTER |Running (Master) indexterm:[Return Code,OCF_RUNNING_MASTER] |OCF_FAILED_MASTER |Failed (Master) indexterm:[Return Code,OCF_FAILED_MASTER] |Other |Failed (Slave) |========================================================= ==== Clone Notifications ==== If the clone has the +notify+ meta-attribute set to +true+, and the resource agent supports the +notify+ action, Pacemaker will call the action when appropriate, passing a number of extra variables which, when combined with additional context, can be used to calculate the current state of the cluster and what is about to happen to it. .Environment variables supplied with Clone notify actions [width="95%",cols="5,<3",options="header",align="center"] |========================================================= |Variable |Description |OCF_RESKEY_CRM_meta_notify_type |Allowed values: +pre+, +post+ indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,type] indexterm:[type,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_operation |Allowed values: +start+, +stop+ indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,operation] indexterm:[operation,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_start_resource |Resources to be started indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,start_resource] indexterm:[start_resource,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_stop_resource |Resources to be stopped indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,stop_resource] indexterm:[stop_resource,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_active_resource |Resources that are running indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,active_resource] indexterm:[active_resource,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_inactive_resource |Resources that are not running indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,inactive_resource] indexterm:[inactive_resource,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_start_uname |Nodes on which resources will be started indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,start_uname] indexterm:[start_uname,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_stop_uname |Nodes on which resources will be stopped indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,stop_uname] indexterm:[stop_uname,Notification Environment Variable] |OCF_RESKEY_CRM_meta_notify_active_uname |Nodes on which resources are running indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,active_uname] indexterm:[active_uname,Notification Environment Variable] |========================================================= The variables come in pairs, such as +OCF_RESKEY_CRM_meta_notify_start_resource+ and +OCF_RESKEY_CRM_meta_notify_start_uname+ and should be treated as an array of whitespace-separated elements. +OCF_RESKEY_CRM_meta_notify_inactive_resource+ is an exception as the matching +uname+ variable does not exist since inactive resources are not running on any node. Thus in order to indicate that +clone:0+ will be started on +sles-1+, +clone:2+ will be started on +sles-3+, and +clone:3+ will be started on +sles-2+, the cluster would set .Notification variables ====== [source,Bash] ------- OCF_RESKEY_CRM_meta_notify_start_resource="clone:0 clone:2 clone:3" OCF_RESKEY_CRM_meta_notify_start_uname="sles-1 sles-3 sles-2" ------- ====== ==== Interpretation of Notification Variables ==== .Pre-notification (stop): * Active resources: +$OCF_RESKEY_CRM_meta_notify_active_resource+ * Inactive resources: +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ * Resources to be started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ .Post-notification (stop) / Pre-notification (start): * Active resources ** +$OCF_RESKEY_CRM_meta_notify_active_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Inactive resources ** +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Resources that were started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources that were stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ .Post-notification (start): * Active resources: ** +$OCF_RESKEY_CRM_meta_notify_active_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Inactive resources: ** +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources that were started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources that were stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ==== Extra Notifications for Promotable Clones ==== .Extra environment variables supplied for promotable clones [width="95%",cols="5,<3",options="header",align="center"] |========================================================= -|_OCF_RESKEY_CRM_meta_notify_master_resource_ +|OCF_RESKEY_CRM_meta_notify_master_resource |Resources that are running in +Master+ mode indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,master_resource] indexterm:[master_resource,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_slave_resource_ +|OCF_RESKEY_CRM_meta_notify_slave_resource |Resources that are running in +Slave+ mode indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,slave_resource] indexterm:[slave_resource,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_promote_resource_ +|OCF_RESKEY_CRM_meta_notify_promote_resource |Resources to be promoted indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,promote_resource] indexterm:[promote_resource,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_demote_resource_ +|OCF_RESKEY_CRM_meta_notify_demote_resource |Resources to be demoted indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,demote_resource] indexterm:[demote_resource,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_promote_uname_ +|OCF_RESKEY_CRM_meta_notify_promote_uname |Nodes on which resources will be promoted indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,promote_uname] indexterm:[promote_uname,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_demote_uname_ +|OCF_RESKEY_CRM_meta_notify_demote_uname |Nodes on which resources will be demoted indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,demote_uname] indexterm:[demote_uname,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_master_uname_ +|OCF_RESKEY_CRM_meta_notify_master_uname |Nodes on which resources are running in +Master+ mode indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,master_uname] indexterm:[master_uname,Notification Environment Variable] -|_OCF_RESKEY_CRM_meta_notify_slave_uname_ +|OCF_RESKEY_CRM_meta_notify_slave_uname |Nodes on which resources are running in +Slave+ mode indexterm:[Environment Variable,OCF_RESKEY_CRM_meta_notify_,slave_uname] indexterm:[slave_uname,Notification Environment Variable] |========================================================= ==== Interpretation of Promotable Notification Variables ==== .Pre-notification (demote): * +Active+ resources: +$OCF_RESKEY_CRM_meta_notify_active_resource+ * +Master+ resources: +$OCF_RESKEY_CRM_meta_notify_master_resource+ * +Slave+ resources: +$OCF_RESKEY_CRM_meta_notify_slave_resource+ * Inactive resources: +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ * Resources to be started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be promoted: +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Resources to be demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources to be stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ .Post-notification (demote) / Pre-notification (stop): * +Active+ resources: +$OCF_RESKEY_CRM_meta_notify_active_resource+ * +Master+ resources: ** +$OCF_RESKEY_CRM_meta_notify_master_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * +Slave+ resources: +$OCF_RESKEY_CRM_meta_notify_slave_resource+ * Inactive resources: +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ * Resources to be started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be promoted: +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Resources to be demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources to be stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Resources that were demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ .Post-notification (stop) / Pre-notification (start) * +Active+ resources: ** +$OCF_RESKEY_CRM_meta_notify_active_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * +Master+ resources: ** +$OCF_RESKEY_CRM_meta_notify_master_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * +Slave+ resources: ** +$OCF_RESKEY_CRM_meta_notify_slave_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Inactive resources: ** +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Resources to be started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be promoted: +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Resources to be demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources to be stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Resources that were demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources that were stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ .Post-notification (start) / Pre-notification (promote) * +Active+ resources: ** +$OCF_RESKEY_CRM_meta_notify_active_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * +Master+ resources: ** +$OCF_RESKEY_CRM_meta_notify_master_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * +Slave+ resources: ** +$OCF_RESKEY_CRM_meta_notify_slave_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Inactive resources: ** +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be promoted: +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Resources to be demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources to be stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Resources that were started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources that were demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources that were stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ .Post-notification (promote) * +Active+ resources: ** +$OCF_RESKEY_CRM_meta_notify_active_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * +Master+ resources: ** +$OCF_RESKEY_CRM_meta_notify_master_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_demote_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * +Slave+ resources: ** +$OCF_RESKEY_CRM_meta_notify_slave_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_start_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Inactive resources: ** +$OCF_RESKEY_CRM_meta_notify_inactive_resource+ ** plus +$OCF_RESKEY_CRM_meta_notify_stop_resource+ ** minus +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources to be promoted: +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Resources to be demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources to be stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ * Resources that were started: +$OCF_RESKEY_CRM_meta_notify_start_resource+ * Resources that were promoted: +$OCF_RESKEY_CRM_meta_notify_promote_resource+ * Resources that were demoted: +$OCF_RESKEY_CRM_meta_notify_demote_resource+ * Resources that were stopped: +$OCF_RESKEY_CRM_meta_notify_stop_resource+ === Monitoring Promotable Clone Resources === The usual monitor actions are insufficient to monitor a promotable clone resource, because Pacemaker needs to verify not only that the resource is active, but also that its actual role matches its intended one. Define two monitoring actions: the usual one will cover the slave role, and an additional one with +role="master"+ will cover the master role. .Monitoring both states of a promotable clone resource ====== [source,XML] ------- ------- ====== [IMPORTANT] =========== It is crucial that _every_ monitor operation has a different interval! Pacemaker currently differentiates between operations only by resource and interval; so if (for example) a promotable clone resource had the same monitor interval for both roles, Pacemaker would ignore the role when checking the status -- which would cause unexpected return codes, and therefore unnecessary complications. =========== [[s-promotion-scores]] === Determining Which Instance is Promoted === Pacemaker can choose a promotable clone instance to be promoted in one of two ways: * Promotion scores: These are node attributes set via the `crm_master` utility, which generally would be called by the resource agent's start action if it supports promotable clones. This tool automatically detects both the resource and host, and should be used to set a preference for being promoted. Based on this, +promoted-max+, and +promoted-node-max+, the instance(s) with the highest preference will be promoted. * Constraints: Location constraints can indicate which nodes are most preferred as masters. .Explicitly preferring node1 to be promoted to master ====== [source,XML] ------- ------- ====== [[s-resource-bundle]] == Bundles - Isolated Environments == indexterm:[bundle] indexterm:[Resource,bundle] indexterm:[Docker,bundle] indexterm:[rkt,bundle] Pacemaker supports a special syntax for launching a https://en.wikipedia.org/wiki/Operating-system-level_virtualization[container] with any infrastructure it requires: the 'bundle'. Pacemaker bundles support https://www.docker.com/[Docker] and https://coreos.com/rkt/[rkt] container technologies. footnote:[Docker is a trademark of Docker, Inc. No endorsement by or association with Docker, Inc. is implied.] .A bundle for a containerized web server ==== [source,XML] ---- ---- ==== === Bundle Properties === .Properties of a Bundle [width="95%",cols="3m,<5",options="header",align="center"] |========================================================= |Field |Description |id |A unique name for the bundle (required) indexterm:[id,bundle] indexterm:[bundle,Property,id] |description |Arbitrary text (not used by Pacemaker) indexterm:[description,bundle] indexterm:[bundle,Property,description] |========================================================= A bundle must contain exactly one ++ or ++ element. === Docker Properties === Before configuring a Docker bundle in Pacemaker, the user must install Docker and supply a fully configured Docker image on every node allowed to run the bundle. Pacemaker will create an implicit +ocf:heartbeat:docker+ resource to manage a bundle's Docker container. The user must ensure that resource agent is installed on every node allowed to run the bundle. .Properties of a Bundle's Docker Element [width="95%",cols="3m,4,<5",options="header",align="center"] |========================================================= |Field |Default |Description |image | |Docker image tag (required) indexterm:[image,Docker] indexterm:[Docker,Property,image] |replicas |Value of +promoted-max+ if that is positive, else 1 |A positive integer specifying the number of container instances to launch indexterm:[replicas,Docker] indexterm:[Docker,Property,replicas] |replicas-per-host |1 |A positive integer specifying the number of container instances allowed to run on a single node indexterm:[replicas-per-host,Docker] indexterm:[Docker,Property,replicas-per-host] |promoted-max |0 |A non-negative integer that, if positive, indicates that the containerized service should be treated as a promotable service, with this many replicas allowed to run the service in the master role indexterm:[promoted-max,Docker] indexterm:[Docker,Property,promoted-max] |network | |If specified, this will be passed to +docker run+ as the https://docs.docker.com/engine/reference/run/#network-settings[network setting] for the Docker container. indexterm:[network,Docker] indexterm:[Docker,Property,network] |run-command |`/usr/sbin/pacemaker-remoted` if bundle contains a +primitive+, otherwise none |This command will be run inside the container when launching it ("PID 1"). If the bundle contains a +primitive+, this command 'must' start pacemaker-remoted (but could, for example, be a script that does other stuff, too). If the container image has a pre-2.0.0 version of Pacemaker, set this to +/usr/sbin/pacemaker_remoted+ (note the underbar instead of dash). indexterm:[run-command,Docker] indexterm:[Docker,Property,run-command] |options | |Extra command-line options to pass to `docker run` indexterm:[options,Docker] indexterm:[Docker,Property,options] |========================================================= For backward compatibility, +masters+ is accepted as an alias for +promoted-max+, but is deprecated since 2.0.0, and support for it will be removed in a future version. === rkt Properties === Before configuring a rkt bundle in Pacemaker, the user must install rkt and supply a fully configured container image on every node allowed to run the bundle. Pacemaker will create an implicit +ocf:heartbeat:rkt+ resource to manage a bundle's rkt container. The user must ensure that resource agent is installed on every node allowed to run the bundle. .Properties of a Bundle's rkt Element [width="95%",cols="3m,4,<5",options="header",align="center"] |========================================================= |Field |Default |Description |image | |Container image tag (required) indexterm:[image,rkt] indexterm:[rkt,Property,image] |replicas |Value of +promoted-max+ if that is positive, else 1 |A positive integer specifying the number of container instances to launch indexterm:[replicas,rkt] indexterm:[rkt,Property,replicas] |replicas-per-host |1 |A positive integer specifying the number of container instances allowed to run on a single node indexterm:[replicas-per-host,rkt] indexterm:[rkt,Property,replicas-per-host] |promoted-max |0 |A non-negative integer that, if positive, indicates that the containerized service should be treated as a promotable service, with this many replicas allowed to run the service in the master role indexterm:[promoted-max,rkt] indexterm:[rkt,Property,promoted-max] |network | |If specified, this will be passed to +rkt run+ as the network setting for the rkt container. indexterm:[network,rkt] indexterm:[rkt,Property,network] |run-command |`/usr/sbin/pacemaker-remoted` if bundle contains a +primitive+, otherwise none |This command will be run inside the container when launching it ("PID 1"). If the bundle contains a +primitive+, this command 'must' start pacemaker-remoted (but could, for example, be a script that does other stuff, too). If the container image has a pre-2.0.0 version of Pacemaker, set this to +/usr/sbin/pacemaker_remoted+ (note the underbar instead of dash). indexterm:[run-command,rkt] indexterm:[rkt,Property,run-command] |options | |Extra command-line options to pass to `rkt run` indexterm:[options,rkt] indexterm:[rkt,Property,options] |========================================================= For backward compatibility, +masters+ is accepted as an alias for +promoted-max+, but is deprecated since 2.0.0, and support for it will be removed in a future version. === Bundle Network Properties === A bundle may optionally contain one ++ element. indexterm:[bundle,network] .Properties of a Bundle's Network Element [width="95%",cols="2m,1,<4",options="header",align="center"] |========================================================= |Field |Default |Description |add-host |TRUE |If TRUE, and +ip-range-start+ is used, Pacemaker will automatically ensure that +/etc/hosts+ inside the containers has entries for each <> and its assigned IP. indexterm:[add-host,network] indexterm:[network,Property,add-host] |ip-range-start | |If specified, Pacemaker will create an implicit +ocf:heartbeat:IPaddr2+ resource for each container instance, starting with this IP address, using up to +replicas+ sequential addresses. These addresses can be used from the host's network to reach the service inside the container, though it is not visible within the container itself. Only IPv4 addresses are currently supported. indexterm:[ip-range-start,network] indexterm:[network,Property,ip-range-start] |host-netmask |32 |If +ip-range-start+ is specified, the IP addresses are created with this CIDR netmask (as a number of bits). indexterm:[host-netmask,network] indexterm:[network,Property,host-netmask] |host-interface | |If +ip-range-start+ is specified, the IP addresses are created on this host interface (by default, it will be determined from the IP address). indexterm:[host-interface,network] indexterm:[network,Property,host-interface] |control-port |3121 |If the bundle contains a +primitive+, the cluster will use this integer TCP port for communication with Pacemaker Remote inside the container. Changing this is useful when the container is unable to listen on the default port, for example, when the container uses the host's network rather than +ip-range-start+ (in which case +replicas-per-host+ must be 1), or when the bundle may run on a Pacemaker Remote node that is already listening on the default port. Any PCMK_remote_port environment variable set on the host or in the container is ignored for bundle connections. indexterm:[control-port,network] indexterm:[network,Property,control-port] |========================================================= [[s-resource-bundle-note-replica-names]] [NOTE] ==== Replicas are named by the bundle id plus a dash and an integer counter starting with zero. For example, if a bundle named +httpd-bundle+ has +replicas=2+, its containers will be named +httpd-bundle-0+ and +httpd-bundle-1+. ==== Additionally, a ++ element may optionally contain one or more ++ elements. indexterm:[bundle,network,port-mapping] .Properties of a Bundle's Port-Mapping Element [width="95%",cols="2m,1,<4",options="header",align="center"] |========================================================= |Field |Default |Description |id | |A unique name for the port mapping (required) indexterm:[id,port-mapping] indexterm:[port-mapping,Property,id] |port | |If this is specified, connections to this TCP port number on the host network (on the container's assigned IP address, if +ip-range-start+ is specified) will be forwarded to the container network. Exactly one of +port+ or +range+ must be specified in a +port-mapping+. indexterm:[port,port-mapping] indexterm:[port-mapping,Property,port] |internal-port |value of +port+ |If +port+ and this are specified, connections to +port+ on the host's network will be forwarded to this port on the container network. indexterm:[internal-port,port-mapping] indexterm:[port-mapping,Property,internal-port] |range | |If this is specified, connections to these TCP port numbers (expressed as 'first_port'-'last_port') on the host network (on the container's assigned IP address, if +ip-range-start+ is specified) will be forwarded to the same ports in the container network. Exactly one of +port+ or +range+ must be specified in a +port-mapping+. indexterm:[range,port-mapping] indexterm:[port-mapping,Property,range] |========================================================= [NOTE] ==== If the bundle contains a +primitive+, Pacemaker will automatically map the +control-port+, so it is not necessary to specify that port in a +port-mapping+. ==== === Bundle Storage Properties === A bundle may optionally contain one ++ element. A ++ element has no properties of its own, but may contain one or more ++ elements. indexterm:[bundle,storage,storage-mapping] .Properties of a Bundle's Storage-Mapping Element [width="95%",cols="2m,1,<4",options="header",align="center"] |========================================================= |Field |Default |Description |id | |A unique name for the storage mapping (required) indexterm:[id,storage-mapping] indexterm:[storage-mapping,Property,id] |source-dir | |The absolute path on the host's filesystem that will be mapped into the container. Exactly one of +source-dir+ and +source-dir-root+ must be specified in a +storage-mapping+. indexterm:[source-dir,storage-mapping] indexterm:[storage-mapping,Property,source-dir] |source-dir-root | |The start of a path on the host's filesystem that will be mapped into the container, using a different subdirectory on the host for each container instance. The subdirectory will be named the same as the <>. Exactly one of +source-dir+ and +source-dir-root+ must be specified in a +storage-mapping+. indexterm:[source-dir-root,storage-mapping] indexterm:[storage-mapping,Property,source-dir-root] |target-dir | |The path name within the container where the host storage will be mapped (required) indexterm:[target-dir,storage-mapping] indexterm:[storage-mapping,Property,target-dir] |options | |File system mount options to use when mapping the storage indexterm:[options,storage-mapping] indexterm:[storage-mapping,Property,options] |========================================================= [NOTE] ==== Pacemaker does not define the behavior if the source directory does not already exist on the host. However, it is expected that the container technology and/or its resource agent will create the source directory in that case. ==== [NOTE] ==== If the bundle contains a +primitive+, Pacemaker will automatically map the equivalent of +source-dir=/etc/pacemaker/authkey target-dir=/etc/pacemaker/authkey+ and +source-dir-root=/var/log/pacemaker/bundles target-dir=/var/log+ into the container, so it is not necessary to specify those paths in a +storage-mapping+. ==== [IMPORTANT] ==== The +PCMK_authkey_location+ environment variable must not be set to anything other than the default of `/etc/pacemaker/authkey` on any node in the cluster. ==== === Bundle Primitive === A bundle may optionally contain one ++ resource (see <>). The primitive may have operations, instance attributes and meta-attributes defined, as usual. If a bundle contains a primitive resource, the container image must include the Pacemaker Remote daemon, and at least one of +ip-range-start+ or +control-port+ must be configured in the bundle. Pacemaker will create an implicit +ocf:pacemaker:remote+ resource for the connection, launch Pacemaker Remote within the container, and monitor and manage the primitive resource via Pacemaker Remote. If the bundle has more than one container instance (replica), the primitive resource will function as an implicit clone (see <>) -- a promotable clone if the bundle has +masters+ greater than zero (see <>). [IMPORTANT] ==== Containers in bundles with a +primitive+ must have an accessible networking environment, so that Pacemaker on the cluster nodes can contact Pacemaker Remote inside the container. For example, the Docker option `--net=none` should not be used with a +primitive+. The default (using a distinct network space inside the container) works in combination with +ip-range-start+. If the Docker option `--net=host` is used (making the container share the host's network space), a unique +control-port+ should be specified for each bundle. Any firewall must allow access to the +control-port+. ==== [[s-bundle-attributes]] === Bundle Node Attributes === If the bundle has a +primitive+, the primitive's resource agent may want to set node attributes such as <>. However, with containers, it is not apparent which node should get the attribute. If the container uses shared storage that is the same no matter which node the container is hosted on, then it is appropriate to use the promotion score on the bundle node itself. On the other hand, if the container uses storage exported from the underlying host, then it may be more appropriate to use the promotion score on the underlying host. Since this depends on the particular situation, the +container-attribute-target+ resource meta-attribute allows the user to specify which approach to use. If it is set to +host+, then user-defined node attributes will be checked on the underlying host. If it is anything else, the local node (in this case the bundle node) is used as usual. This only applies to user-defined attributes; the cluster will always check the local node for cluster-defined attributes such as +#uname+. If +container-attribute-target+ is +host+, the cluster will pass additional environment variables to the primitive's resource agent that allow it to set node attributes appropriately: +CRM_meta_container_attribute_target+ (identical to the meta-attribute value) and +CRM_meta_physical_host+ (the name of the underlying host). [NOTE] ==== When called by a resource agent, the attrd_updater and crm_attribute commands will automatically check those environment variables and set attributes appropriately. ==== === Bundle Meta-Attributes === Any meta-attribute set on a bundle will be inherited by the bundle's primitive and any resources implicitly created by Pacemaker for the bundle. This includes options such as +priority+, +target-role+, and +is-managed+. See <> for more information. === Limitations of Bundles === Restarting pacemaker while a bundle is unmanaged or the cluster is in maintenance mode may cause the bundle to fail. Bundles may not be explicitly cloned or included in groups. This includes the bundle's primitive and any resources implicitly created by Pacemaker for the bundle. (If +replicas+ is greater than 1, the bundle will behave like a clone implicitly.) Bundles do not have instance attributes, utilization attributes, or operations, though a bundle's primitive may have them. A bundle with a primitive can run on a Pacemaker Remote node only if the bundle uses a distinct +control-port+.