diff --git a/.gitignore b/.gitignore index 3b5bb80e91..17d5615cbc 100644 --- a/.gitignore +++ b/.gitignore @@ -1,343 +1,346 @@ # # Copyright 2011-2023 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # # Common conventions for files that should be ignored *~ *.bz2 *.diff *.orig *.patch *.rej *.sed *.swp *.tar.gz *.tgz \#* .\#* logs # libtool artifacts *.la *.lo .libs libltdl libtool libtool.m4 ltdl.m4 /m4/argz.m4 /m4/ltargz.m4 /m4/ltoptions.m4 /m4/ltsugar.m4 /m4/ltversion.m4 /m4/lt~obsolete.m4 # autotools artifacts .deps .dirstamp Makefile Makefile.in aclocal.m4 autoconf autoheader autom4te.cache/ automake /confdefs.h config.log config.status configure /conftest* # gettext artifacts /ABOUT-NLS /m4/codeset.m4 /m4/fcntl-o.m4 /m4/gettext.m4 /m4/glibc2.m4 /m4/glibc21.m4 /m4/iconv.m4 /m4/intdiv0.m4 /m4/intl.m4 /m4/intldir.m4 /m4/intlmacosx.m4 /m4/intmax.m4 /m4/inttypes-pri.m4 /m4/inttypes_h.m4 /m4/lcmessage.m4 /m4/lib-ld.m4 /m4/lib-link.m4 /m4/lib-prefix.m4 /m4/lock.m4 /m4/longlong.m4 /m4/nls.m4 /m4/po.m4 /m4/printf-posix.m4 /m4/progtest.m4 /m4/size_max.m4 /m4/stdint_h.m4 /m4/threadlib.m4 /m4/uintmax_t.m4 /m4/visibility.m4 /m4/wchar_t.m4 /m4/wint_t.m4 /m4/xsize.m4 /po/*.gmo /po/*.header /po/*.pot /po/*.sin /po/Makefile.in.in /po/Makevars.template /po/POTFILES /po/Rules-quot /po/stamp-po # configure targets /cts/benchmark/clubench /cts/cts-attrd /cts/cts-cli /cts/cts-coverage /cts/cts-exec /cts/cts-fencing /cts/cts-regression /cts/cts-scheduler /cts/lab/CTS.py /cts/lab/CTSlab.py /cts/lab/OCFIPraTest.py /cts/lab/cluster_test /cts/lab/cts /cts/lab/cts-log-watcher /cts/lxc_autogen.sh /cts/support/LSBDummy /cts/support/cts-support /cts/support/fence_dummy /cts/support/pacemaker-cts-dummyd /cts/support/pacemaker-cts-dummyd@.service /daemons/execd/pacemaker_remote /daemons/execd/pacemaker_remote.service /daemons/fenced/fence_legacy /daemons/fenced/fence_watchdog /daemons/pacemakerd/pacemaker.combined.upstart /daemons/pacemakerd/pacemaker.service /daemons/pacemakerd/pacemaker.upstart /doc/Doxyfile /etc/init.d/pacemaker /etc/logrotate.d/pacemaker /extra/resources/ClusterMon /extra/resources/Dummy /extra/resources/HealthCPU /extra/resources/HealthIOWait /extra/resources/HealthSMART /extra/resources/Stateful /extra/resources/SysInfo /extra/resources/attribute /extra/resources/controld /extra/resources/ifspeed /extra/resources/o2cb /extra/resources/ping /extra/resources/remote /include/config.h /include/config.h.in /include/crm_config.h /maint/bumplibs /python/pacemaker/buildoptions.py /python/setup.py +/tools/cluster-clean +/tools/cluster-helper +/tools/cluster-init /tools/cibsecret /tools/crm_error /tools/crm_failcount /tools/crm_master /tools/crm_mon.service /tools/crm_mon.upstart /tools/crm_report /tools/crm_rule /tools/crm_standby /tools/pcmk_simtimes /tools/report.collector /tools/report.common # Compiled targets and intermediary files *.o *.pc *.pyc /daemons/attrd/pacemaker-attrd /daemons/based/pacemaker-based /daemons/controld/pacemaker-controld /daemons/execd/cts-exec-helper /daemons/execd/pacemaker-execd /daemons/execd/pacemaker-remoted /daemons/fenced/cts-fence-helper /daemons/fenced/pacemaker-fenced /daemons/pacemakerd/pacemakerd /daemons/schedulerd/pacemaker-schedulerd /devel/scratch /lib/gnu/stdalign.h /tools/attrd_updater /tools/cibadmin /tools/crmadmin /tools/crm_attribute /tools/crm_diff /tools/crm_mon /tools/crm_node /tools/crm_resource /tools/crm_shadow /tools/crm_simulate /tools/crm_ticket /tools/crm_verify /tools/iso8601 /tools/stonith_admin # Generated XML schema files /xml/crm_mon.rng /xml/pacemaker*.rng /xml/versions.rng /xml/api/api-result*.rng # Working directories for make dist and make export /pacemaker-[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9] # Documentation build targets and intermediary files *.7 *.7.xml *.7.html *.8 *.8.xml *.8.html GPATH GRTAGS GTAGS TAGS /daemons/fenced/pacemaker-fenced.xml /daemons/schedulerd/pacemaker-schedulerd.xml /doc/.ABI-build /doc/HTML /doc/abi_dumps /doc/abi-check /doc/api/ /doc/compat_reports /doc/crm_fencing.html /doc/sphinx/*/_build /doc/sphinx/*/conf.py /doc/sphinx/*/generated /doc/sphinx/build-2.1.txt /doc/sphinx/shared/images/*.png # Test artifacts (from unit tests, regression tests, static analysis, etc.) *.coverity *.gcda *.gcno coverity-* pacemaker_*.info /coverage /cppcheck.out /cts/scheduler/*.ref /cts/scheduler/*.up /cts/scheduler/*.up.err /cts/scheduler/bug-rh-1097457.log /cts/scheduler/bug-rh-1097457.trs /cts/scheduler/shadow.* /cts/test-suite.log /lib/*/tests/*/*.log /lib/*/tests/*/*_test /lib/*/tests/*/*.trs /xml/test-*/*.up /xml/test-*/*.up.err /xml/assets/*.rng /xml/assets/diffview.js /xml/assets/xmlcatalog /test/_test_file.c # Packaging artifacts *.rpm /pacemaker.spec /rpm/[A-LN-Z]* /rpm/build.counter /rpm/mock # Project maintainer artifacts /maint/gnulib /maint/mocked/based /maint/testcc_helper.cc /maint/testcc_*_h # Formerly built files (helps when jumping back and forth in checkout) /.ABI-build /Doxyfile /HTML /abi_dumps /abi-check /build.counter /compat_reports /compile /cts/.regression.failed.diff /attrd /cib /config.guess /config.sub /coverage.sh /crmd /cts/CTS.py /cts/CTSlab.py /cts/CTSvars.py /cts/HBDummy /cts/LSBDummy /cts/OCFIPraTest.py /cts/cluster_test /cts/cts /cts/cts-log-watcher /cts/cts-support /cts/fence_dummy /cts/lab/CTSvars.py /cts/pacemaker-cts-dummyd /cts/pacemaker-cts-dummyd@.service /daemons/based/cibmon /daemons/pacemakerd/pacemaker /depcomp /doc/*.build /doc/*/en-US/Ap-*.xml /doc/*/en-US/Ch-*.xml /doc/*/publican.cfg /doc/*/publish /doc/*/tmp/** /doc/Clusters_from_Scratch.txt /doc/Pacemaker_Explained.txt /doc/acls.html /doc/publican-catalog* /doc/shared/en-US/*.xml /doc/shared/en-US/images/pcmk-*.png /doc/shared/en-US/images/Policy-Engine-*.png /extra/logrotate/pacemaker /fencing /include/stamp-* /install-sh /lib/common/md5.c /lib/common/tests/flags/pcmk__clear_flags_as /lib/common/tests/flags/pcmk__set_flags_as /lib/common/tests/flags/pcmk_all_flags_set /lib/common/tests/flags/pcmk_any_flags_set /lib/common/tests/operations/parse_op_key /lib/common/tests/strings/pcmk__btoa /lib/common/tests/strings/pcmk__parse_ll_range /lib/common/tests/strings/pcmk__scan_double /lib/common/tests/strings/pcmk__str_any_of /lib/common/tests/strings/pcmk__strcmp /lib/common/tests/strings/pcmk__char_in_any_str /lib/common/tests/utils/pcmk_str_is_infinity /lib/common/tests/utils/pcmk_str_is_minus_infinity /lib/gnu/libgnu.a /lib/pengine/tests/rules/pe_cron_range_satisfied /lrmd /ltmain.sh /mcp /missing /mock /pacemaker-*.spec /pengine /py-compile /scratch /test-driver /xml/crm.dtd ylwrap diff --git a/configure.ac b/configure.ac index e55f876d11..191bbd8ba4 100644 --- a/configure.ac +++ b/configure.ac @@ -1,2143 +1,2146 @@ dnl dnl autoconf for Pacemaker dnl dnl Copyright 2009-2023 the Pacemaker project contributors dnl dnl The version control history for this file may have further details. dnl dnl This source code is licensed under the GNU General Public License version 2 dnl or later (GPLv2+) WITHOUT ANY WARRANTY. dnl =============================================== dnl Bootstrap dnl =============================================== AC_PREREQ(2.64) dnl AC_CONFIG_MACRO_DIR is deprecated as of autoconf 2.70 (2020-12-08). dnl Once we can require that version, we can simplify this, and no longer dnl need ACLOCAL_AMFLAGS in Makefile.am. m4_ifdef([AC_CONFIG_MACRO_DIRS], [AC_CONFIG_MACRO_DIRS([m4])], [AC_CONFIG_MACRO_DIR([m4])]) AC_DEFUN([AC_DATAROOTDIR_CHECKED]) dnl Suggested structure: dnl information on the package dnl checks for programs dnl checks for libraries dnl checks for header files dnl checks for types dnl checks for structures dnl checks for compiler characteristics dnl checks for library functions dnl checks for system services m4_include([m4/version.m4]) AC_INIT([pacemaker], VERSION_NUMBER, [users@clusterlabs.org], [pacemaker], PCMK_URL) PCMK_FEATURES="" LT_CONFIG_LTDL_DIR([libltdl]) AC_CONFIG_AUX_DIR([libltdl/config]) AC_CANONICAL_HOST dnl Where #defines that autoconf makes (e.g. HAVE_whatever) go dnl dnl Internal header: include/config.h dnl - Contains ALL defines dnl - include/config.h.in is generated automatically by autoheader dnl - NOT to be included in any header files except crm_internal.h dnl (which is also not to be included in any other header files) dnl dnl External header: include/crm_config.h dnl - Contains a subset of defines checked here dnl - Manually edit include/crm_config.h.in to have configure include dnl new defines dnl - Should not include HAVE_* defines dnl - Safe to include anywhere AC_CONFIG_HEADERS([include/config.h include/crm_config.h]) dnl 1.13: minimum automake version required dnl foreign: don't require GNU-standard top-level files dnl tar-ustar: use (older) POSIX variant of generated tar rather than v7 dnl subdir-objects: keep .o's with their .c's (no-op in 2.0+) AM_INIT_AUTOMAKE([1.13 foreign tar-ustar subdir-objects]) dnl Require minimum version of pkg-config PKG_PROG_PKG_CONFIG(0.27) AS_IF([test x"${PKG_CONFIG}" != x""], [], [AC_MSG_FAILURE([Could not find required build tool pkg-config (0.27 or later)])]) PKG_INSTALLDIR PKG_NOARCH_INSTALLDIR dnl Example 2.4. Silent Custom Rule to Generate a File dnl %-bar.pc: %.pc dnl $(AM_V_GEN)$(LN_S) $(notdir $^) $@ CC_IN_CONFIGURE=yes export CC_IN_CONFIGURE LDD=ldd dnl ======================================================================== dnl Compiler characteristics dnl ======================================================================== dnl A particular compiler can be forced by setting the CC environment variable AC_PROG_CC dnl Use at least C99 if possible (automatic for autoconf >= 2.70) m4_version_prereq([2.70], [:], [AC_PROG_CC_STDC]) dnl C++ is not needed for build, just maintainer utilities AC_PROG_CXX dnl We use md5.c from gnulib, which has its own m4 macros. Per its docs: dnl "The macro gl_EARLY must be called as soon as possible after verifying that dnl the C compiler is working. ... The core part of the gnulib checks are done dnl by the macro gl_INIT." In addition, prevent gnulib from introducing OpenSSL dnl as a dependency. gl_EARLY gl_SET_CRYPTO_CHECK_DEFAULT([no]) gl_INIT # --enable-new-dtags: Use RUNPATH instead of RPATH. # It is necessary to have this done before libtool does linker detection. # See also: https://github.com/kronosnet/kronosnet/issues/107 AX_CHECK_LINK_FLAG([-Wl,--enable-new-dtags], [AM_LDFLAGS=-Wl,--enable-new-dtags], [AC_MSG_ERROR(["Linker support for --enable-new-dtags is required"])]) AC_SUBST([AM_LDFLAGS]) saved_LDFLAGS="$LDFLAGS" LDFLAGS="$AM_LDFLAGS $LDFLAGS" LT_INIT([dlopen]) LDFLAGS="$saved_LDFLAGS" LTDL_INIT([convenience]) AC_TYPE_SIZE_T AC_CHECK_SIZEOF(char) AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) AC_CHECK_SIZEOF(long long) dnl =============================================== dnl Helpers dnl =============================================== cc_supports_flag() { local CFLAGS="-Werror $@" AC_MSG_CHECKING([whether $CC supports $@]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[ ]])], [RC=0; AC_MSG_RESULT([yes])], [RC=1; AC_MSG_RESULT([no])]) return $RC } # Some tests need to use their own CFLAGS cc_temp_flags() { ac_save_CFLAGS="$CFLAGS" CFLAGS="$*" } cc_restore_flags() { CFLAGS=$ac_save_CFLAGS } # expand_path_option $path_variable_name $default expand_path_option() { # The first argument is the variable *name* (not value) ac_path_varname="$1" # Get the original value of the variable ac_path_value=$(eval echo "\${${ac_path_varname}}") # Expand any literal variable expressions in the value so that we don't # end up with something like '${prefix}' in #defines etc. # # Autoconf deliberately leaves values unexpanded to allow overriding # the configure script choices in make commands (for example, # "make exec_prefix=/foo install"). No longer being able to do this seems # like no great loss. eval ac_path_value=$(eval echo "${ac_path_value}") # Use (expanded) default if necessary AS_IF([test x"${ac_path_value}" = x""], [eval ac_path_value=$(eval echo "$2")]) # Require a full path AS_CASE(["$ac_path_value"], [/*], [eval ${ac_path_varname}="$ac_path_value"], [*], [AC_MSG_ERROR([$ac_path_varname value "$ac_path_value" is not a full path])] ) } # yes_no_try $user_response $default DISABLED=0 REQUIRED=1 OPTIONAL=2 yes_no_try() { local value AS_IF([test x"$1" = x""], [value="$2"], [value="$1"]) AS_CASE(["`echo "$value" | tr '[A-Z]' '[a-z]'`"], [0|no|false|disable], [return $DISABLED], [1|yes|true|enable], [return $REQUIRED], [try|check], [return $OPTIONAL] ) AC_MSG_ERROR([Invalid option value "$value"]) } check_systemdsystemunitdir() { AC_MSG_CHECKING([which system unit file directory to use]) PKG_CHECK_VAR([systemdsystemunitdir], [systemd], [systemdsystemunitdir]) AC_MSG_RESULT([${systemdsystemunitdir}]) test x"$systemdsystemunitdir" != x"" return $? } dnl =============================================== dnl Configure Options dnl =============================================== dnl Actual library checks come later, but pkg-config can be used here to grab dnl external values to use as defaults for configure options dnl Per the autoconf docs, --enable-*/--disable-* options should control dnl features inherent to Pacemaker, while --with-*/--without-* options should dnl control the use of external software. However, --enable-*/--disable-* may dnl implicitly require additional external dependencies, and dnl --with-*/--without-* may implicitly enable or disable features, so the dnl line is blurry. dnl dnl We also use --with-* options for custom file, directory, and path dnl locations, since autoconf does not provide an option type for those. dnl --enable-* options: build process AC_ARG_ENABLE([quiet], [AS_HELP_STRING([--enable-quiet], [suppress make output unless there is an error @<:@no@:>@])] ) yes_no_try "$enable_quiet" "no" enable_quiet=$? AC_ARG_ENABLE([fatal-warnings], [AS_HELP_STRING([--enable-fatal-warnings], [enable pedantic and fatal warnings for gcc @<:@try@:>@])], ) yes_no_try "$enable_fatal_warnings" "try" enable_fatal_warnings=$? AC_ARG_ENABLE([hardening], [AS_HELP_STRING([--enable-hardening], [harden the resulting executables/libraries @<:@try@:>@])] ) yes_no_try "$enable_hardening" "try" enable_hardening=$? dnl --enable-* options: features AC_ARG_ENABLE([systemd], [AS_HELP_STRING([--enable-systemd], [enable support for managing resources via systemd @<:@try@:>@])] ) yes_no_try "$enable_systemd" "try" enable_systemd=$? AC_ARG_ENABLE([upstart], [AS_HELP_STRING([--enable-upstart], [enable support for managing resources via Upstart (deprecated) @<:@try@:>@])] ) yes_no_try "$enable_upstart" "try" enable_upstart=$? dnl --enable-* options: features inherent to Pacemaker AC_ARG_ENABLE([compat-2.0], [AS_HELP_STRING([--enable-compat-2.0], m4_normalize([ preserve certain output as it was in 2.0; this option will be available only for the lifetime of the 2.1 series @<:@no@:>@]))] ) yes_no_try "$enable_compat_2_0" "no" enable_compat_2_0=$? AS_IF([test $enable_compat_2_0 -ne $DISABLED], [ AC_DEFINE_UNQUOTED([PCMK__COMPAT_2_0], [1], [Keep certain output compatible with 2.0 release series]) PCMK_FEATURES="$PCMK_FEATURES compat-2.0" ] ) # Add an option to create symlinks at the pre-2.0.0 daemon name locations, so # that users and tools can continue to invoke those names directly (e.g., for # meta-data). This option will be removed in a future release. AC_ARG_ENABLE([legacy-links], [AS_HELP_STRING([--enable-legacy-links], [add symlinks for old daemon names (deprecated) @<:@no@:>@])] ) yes_no_try "$enable_legacy_links" "no" enable_legacy_links=$? AM_CONDITIONAL([BUILD_LEGACY_LINKS], [test $enable_legacy_links -ne $DISABLED]) # AM_GNU_GETTEXT calls AM_NLS which defines the nls option, but it defaults # to enabled. We override the definition of AM_NLS to flip the default and mark # it as experimental in the help text. AC_DEFUN([AM_NLS], [AC_MSG_CHECKING([whether NLS is requested]) AC_ARG_ENABLE([nls], [AS_HELP_STRING([--enable-nls], [use Native Language Support (experimental)])], USE_NLS=$enableval, USE_NLS=no) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS])] ) AM_GNU_GETTEXT([external]) AM_GNU_GETTEXT_VERSION([0.18]) AS_IF([test x"$enable_nls" = x"yes"], [PCMK_FEATURES="$PCMK_FEATURES nls"]) dnl --with-* options: external software support, and custom locations dnl This argument is defined via an M4 macro so default can be a variable AC_DEFUN([VERSION_ARG], [AC_ARG_WITH([version], [AS_HELP_STRING([--with-version=VERSION], [override package version @<:@$1@:>@])], [ PACEMAKER_VERSION="$withval" ], [ PACEMAKER_VERSION="$PACKAGE_VERSION" ])] ) VERSION_ARG(VERSION_NUMBER) # Redefine PACKAGE_VERSION and VERSION according to PACEMAKER_VERSION in case # the user used --with-version. Unfortunately, this can only affect the # substitution variables and later uses in this file, not the config.h # constants, so we have to be careful to use only PACEMAKER_VERSION in C code. PACKAGE_VERSION=$PACEMAKER_VERSION VERSION=$PACEMAKER_VERSION # Detect highest API schema version (use git if available to list managed RNGs, # in case there are leftover schema files from an earlier build of a different # version, otherwise check all RNGs) API_VERSION=$({ git ls-files xml/api/*.rng 2>/dev/null || ls -1 xml/api/*.rng ; } dnl | sed -n -e 's/^.*-\([[0-9]][[0-9.]]*\).rng$/\1/p' | sort -V | tail -1) AC_DEFINE_UNQUOTED([PCMK__API_VERSION], ["$API_VERSION"], [Highest API schema version]) # Re-run configure at next make if any RNG changes, to re-detect highest AC_SUBST([CONFIG_STATUS_DEPENDENCIES], [$(echo '$(wildcard $(top_srcdir)/xml/api/*.rng)')]) CRM_DAEMON_USER="" AC_ARG_WITH([daemon-user], [AS_HELP_STRING([--with-daemon-user=USER], [user to run unprivileged Pacemaker daemons as (advanced option: changing this may break other cluster components unless similarly configured) @<:@hacluster@:>@])], [ CRM_DAEMON_USER="$withval" ] ) CRM_DAEMON_GROUP="" AC_ARG_WITH([daemon-group], [AS_HELP_STRING([--with-daemon-group=GROUP], [group to run unprivileged Pacemaker daemons as (advanced option: changing this may break other cluster components unless similarly configured) @<:@haclient@:>@])], [ CRM_DAEMON_GROUP="$withval" ] ) BUG_URL="" AC_ARG_WITH([bug-url], [AS_HELP_STRING([--with-bug-url=DIR], m4_normalize([ address where users should submit bug reports @<:@https://bugs.clusterlabs.org/enter_bug.cgi?product=Pacemaker@:>@]))], [ BUG_URL="$withval" ] ) dnl --with-* options: features AC_ARG_WITH([cibsecrets], [AS_HELP_STRING([--with-cibsecrets], [support separate file for CIB secrets @<:@no@:>@])] ) yes_no_try "$with_cibsecrets" "no" with_cibsecrets=$? AC_ARG_WITH([gnutls], [AS_HELP_STRING([--with-gnutls], [support Pacemaker Remote and remote-tls-port using GnuTLS @<:@try@:>@])] ) yes_no_try "$with_gnutls" "try" with_gnutls=$? PCMK_GNUTLS_PRIORITIES="NORMAL" AC_ARG_WITH([gnutls-priorities], [AS_HELP_STRING([--with-gnutls-priorities], [default GnuTLS cipher priorities @<:@NORMAL@:>@])], [ test x"$withval" = x"no" || PCMK_GNUTLS_PRIORITIES="$withval" ] ) AC_ARG_WITH([concurrent-fencing-default], [AS_HELP_STRING([--with-concurrent-fencing-default], [default value for concurrent-fencing cluster option @<:@false@:>@])], ) AS_CASE([$with_concurrent_fencing_default], [""], [with_concurrent_fencing_default="false"], [false], [], [true], [PCMK_FEATURES="$PCMK_FEATURES default-concurrent-fencing"], [AC_MSG_ERROR([Invalid value "$with_concurrent_fencing_default" for --with-concurrent-fencing-default])] ) AC_DEFINE_UNQUOTED([PCMK__CONCURRENT_FENCING_DEFAULT], ["$with_concurrent_fencing_default"], [Default value for concurrent-fencing cluster option]) AC_ARG_WITH([sbd-sync-default], [AS_HELP_STRING([--with-sbd-sync-default], m4_normalize([ default value used by sbd if SBD_SYNC_RESOURCE_STARTUP environment variable is not set @<:@false@:>@]))], ) AS_CASE([$with_sbd_sync_default], [""], [with_sbd_sync_default=false], [false], [], [true], [PCMK_FEATURES="$PCMK_FEATURES default-sbd-sync"], [AC_MSG_ERROR([Invalid value "$with_sbd_sync_default" for --with-sbd-sync-default])] ) AC_DEFINE_UNQUOTED([PCMK__SBD_SYNC_DEFAULT], [$with_sbd_sync_default], [Default value for SBD_SYNC_RESOURCE_STARTUP environment variable]) AC_ARG_WITH([resource-stickiness-default], [AS_HELP_STRING([--with-resource-stickiness-default], [If positive, value to add to new CIBs as explicit resource default for resource-stickiness @<:@0@:>@])], ) errmsg="Invalid value \"$with_resource_stickiness_default\" for --with-resource-stickiness-default" AS_CASE([$with_resource_stickiness_default], [0|""], [with_resource_stickiness_default="0"], [*[[!0-9]]*], [AC_MSG_ERROR([$errmsg])], [PCMK_FEATURES="$PCMK_FEATURES default-resource-stickiness"] ) AC_DEFINE_UNQUOTED([PCMK__RESOURCE_STICKINESS_DEFAULT], [$with_resource_stickiness_default], [Default value for resource-stickiness resource meta-attribute]) AC_ARG_WITH([corosync], [AS_HELP_STRING([--with-corosync], [support the Corosync messaging and membership layer @<:@try@:>@])] ) yes_no_try "$with_corosync" "try" with_corosync=$? dnl Get default from corosync if possible. PKG_CHECK_VAR([PCMK__COROSYNC_CONF], [corosync], [corosysconfdir], [PCMK__COROSYNC_CONF="$PCMK__COROSYNC_CONF/corosync.conf"], [PCMK__COROSYNC_CONF="${sysconfdir}/corosync/corosync.conf"]) AC_ARG_WITH([corosync-conf], [AS_HELP_STRING([--with-corosync-conf], m4_normalize([ location of Corosync configuration file @<:@value from Corosync package if available otherwise SYSCONFDIR/corosync/corosync.conf@:>@]))], [ PCMK__COROSYNC_CONF="$withval" ] ) AC_ARG_WITH([nagios], [AS_HELP_STRING([--with-nagios], [support nagios resources])] ) yes_no_try "$with_nagios" "try" with_nagios=$? dnl --with-* options: directory locations AC_ARG_WITH([nagios-plugin-dir], [AS_HELP_STRING([--with-nagios-plugin-dir=DIR], [directory for nagios plugins @<:@LIBEXECDIR/nagios/plugins@:>@])], [ NAGIOS_PLUGIN_DIR="$withval" ] ) AC_ARG_WITH([nagios-metadata-dir], [AS_HELP_STRING([--with-nagios-metadata-dir=DIR], [directory for nagios plugins metadata @<:@DATADIR/nagios/plugins-metadata@:>@])], [ NAGIOS_METADATA_DIR="$withval" ] ) INITDIR="" AC_ARG_WITH([initdir], [AS_HELP_STRING([--with-initdir=DIR], [directory for init (rc) scripts])], [ INITDIR="$withval" ] ) systemdsystemunitdir="${systemdsystemunitdir-}" AC_ARG_WITH([systemdsystemunitdir], [AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [directory for systemd unit files (advanced option: must match what systemd uses)])], [ systemdsystemunitdir="$withval" ] ) CONFIGDIR="" AC_ARG_WITH([configdir], [AS_HELP_STRING([--with-configdir=DIR], [directory for Pacemaker configuration file @<:@SYSCONFDIR/sysconfig@:>@])], [ CONFIGDIR="$withval" ] ) dnl --runstatedir is available as of autoconf 2.70 (2020-12-08). When users dnl have an older version, they can use our --with-runstatedir. pcmk_runstatedir="" AC_ARG_WITH([runstatedir], [AS_HELP_STRING([--with-runstatedir=DIR], [modifiable per-process data @<:@LOCALSTATEDIR/run@:>@ (ignored if --runstatedir is available)])], [ pcmk_runstatedir="$withval" ] ) CRM_LOG_DIR="" AC_ARG_WITH([logdir], [AS_HELP_STRING([--with-logdir=DIR], [directory for Pacemaker log file @<:@LOCALSTATEDIR/log/pacemaker@:>@])], [ CRM_LOG_DIR="$withval" ] ) CRM_BUNDLE_DIR="" AC_ARG_WITH([bundledir], [AS_HELP_STRING([--with-bundledir=DIR], [directory for Pacemaker bundle logs @<:@LOCALSTATEDIR/log/pacemaker/bundles@:>@])], [ CRM_BUNDLE_DIR="$withval" ] ) dnl Get default from resource-agents if possible. Otherwise, the default uses dnl /usr/lib rather than libdir because it's determined by the OCF project and dnl not Pacemaker. Even if a user wants to install Pacemaker to /usr/local or dnl such, the OCF agents will be expected in their usual location. However, we dnl do give the user the option to override it. PKG_CHECK_VAR([OCF_ROOT_DIR], [resource-agents], [ocfrootdir], [], [OCF_ROOT_DIR="/usr/lib/ocf"]) AC_ARG_WITH([ocfdir], [AS_HELP_STRING([--with-ocfdir=DIR], m4_normalize([ OCF resource agent root directory (advanced option: changing this may break other cluster components unless similarly configured) @<:@value from resource-agents package if available otherwise /usr/lib/ocf@:>@]))], [ OCF_ROOT_DIR="$withval" ] ) AC_SUBST(OCF_ROOT_DIR) AC_DEFINE_UNQUOTED([OCF_ROOT_DIR], ["$OCF_ROOT_DIR"], [OCF root directory for resource agents and libraries]) PKG_CHECK_VAR([OCF_RA_PATH], [resource-agents], [ocfrapath], [], [OCF_RA_PATH="$OCF_ROOT_DIR/resource.d"]) AC_ARG_WITH([ocfrapath], [AS_HELP_STRING([--with-ocfrapath=DIR], m4_normalize([ OCF resource agent directories (colon-separated) to search @<:@value from resource-agents package if available otherwise OCFDIR/resource.d@:>@]))], [ OCF_RA_PATH="$withval" ] ) AC_SUBST(OCF_RA_PATH) OCF_RA_INSTALL_DIR="$OCF_ROOT_DIR/resource.d" AC_ARG_WITH([ocfrainstalldir], [AS_HELP_STRING([--with-ocfrainstalldir=DIR], m4_normalize([ OCF installation directory for Pacemakers resource agents @<:@OCFDIR/resource.d@:>@]))], [ OCF_RA_INSTALL_DIR="$withval" ] ) AC_SUBST(OCF_RA_INSTALL_DIR) dnl Get default from fence-agents if available PKG_CHECK_VAR([FA_PREFIX], [fence-agents], [prefix], [PCMK__FENCE_BINDIR="${FA_PREFIX}/sbin"], [PCMK__FENCE_BINDIR="$sbindir"]) AC_ARG_WITH([fence-bindir], [AS_HELP_STRING([--with-fence-bindir=DIR], m4_normalize([ directory for executable fence agents @<:@value from fence-agents package if available otherwise SBINDIR@:>@]))], [ PCMK__FENCE_BINDIR="$withval" ] ) AC_SUBST(PCMK__FENCE_BINDIR) dnl --with-* options: non-production testing AC_ARG_WITH([profiling], [AS_HELP_STRING([--with-profiling], [disable optimizations, for effective profiling @<:@no@:>@])] ) yes_no_try "$with_profiling" "no" with_profiling=$? AC_ARG_WITH([coverage], [AS_HELP_STRING([--with-coverage], [disable optimizations, for effective profiling and coverage testing @<:@no@:>@])] ) yes_no_try "$with_coverage" "no" with_coverage=$? AC_ARG_WITH([sanitizers], [AS_HELP_STRING([--with-sanitizers=...,...], [enable SANitizer build, do *NOT* use for production. Only ASAN/UBSAN/TSAN are currently supported])], [ SANITIZERS="$withval" ], [ SANITIZERS="" ]) dnl Environment variable options AC_ARG_VAR([CFLAGS_HARDENED_LIB], [extra C compiler flags for hardened libraries]) AC_ARG_VAR([LDFLAGS_HARDENED_LIB], [extra linker flags for hardened libraries]) AC_ARG_VAR([CFLAGS_HARDENED_EXE], [extra C compiler flags for hardened executables]) AC_ARG_VAR([LDFLAGS_HARDENED_EXE], [extra linker flags for hardened executables]) dnl =============================================== dnl General Processing dnl =============================================== AC_DEFINE_UNQUOTED(PACEMAKER_VERSION, "$VERSION", [Version number of this Pacemaker build]) PACKAGE_SERIES=`echo $VERSION | awk -F. '{ print $1"."$2 }'` AC_SUBST(PACKAGE_SERIES) AC_PROG_LN_S AC_PROG_MKDIR_P # Check for fatal warning support AS_IF([test $enable_fatal_warnings -ne $DISABLED && test x"$GCC" = x"yes" && cc_supports_flag -Werror], [WERROR="-Werror"], [ WERROR="" AS_CASE([$enable_fatal_warnings], [$REQUIRED], [AC_MSG_ERROR([Compiler does not support fatal warnings])], [$OPTIONAL], [ AC_MSG_NOTICE([Compiler does not support fatal warnings]) enable_fatal_warnings=$DISABLED ]) ]) AC_MSG_NOTICE([Sanitizing prefix: ${prefix}]) AS_IF([test x"$prefix" = x"NONE"], [ prefix=/usr dnl Fix default variables - "prefix" variable if not specified AS_IF([test x"$localstatedir" = x"\${prefix}/var"], [localstatedir="/var"]) AS_IF([test x"$sysconfdir" = x"\${prefix}/etc"], [sysconfdir="/etc"]) ]) AC_MSG_NOTICE([Sanitizing exec_prefix: ${exec_prefix}]) AS_CASE([$exec_prefix], [prefix|NONE], [exec_prefix=$prefix]) AC_MSG_NOTICE([Sanitizing INITDIR: ${INITDIR}]) AS_CASE([$INITDIR], [prefix], [INITDIR=$prefix], [""], [ AC_MSG_CHECKING([which init (rc) directory to use]) for initdir in /etc/init.d /etc/rc.d/init.d /sbin/init.d \ /usr/local/etc/rc.d /etc/rc.d do AS_IF([test -d $initdir], [ INITDIR=$initdir break ]) done AC_MSG_RESULT([$INITDIR]) ]) AC_SUBST(INITDIR) AC_MSG_NOTICE([Sanitizing libdir: ${libdir}]) AS_CASE([$libdir], [prefix|NONE], [ AC_MSG_CHECKING([which lib directory to use]) for aDir in lib64 lib do trydir="${exec_prefix}/${aDir}" AS_IF([test -d ${trydir}], [ libdir=${trydir} break ]) done AC_MSG_RESULT([$libdir]) ]) dnl Expand values of autoconf-provided directory options expand_path_option prefix expand_path_option exec_prefix expand_path_option bindir expand_path_option sbindir expand_path_option libexecdir expand_path_option datadir expand_path_option sysconfdir expand_path_option sharedstatedir expand_path_option localstatedir expand_path_option libdir expand_path_option includedir expand_path_option oldincludedir expand_path_option infodir expand_path_option mandir dnl Home-grown variables expand_path_option localedir "${datadir}/locale" AC_DEFINE_UNQUOTED([PCMK__LOCALE_DIR],["$localedir"], [Base directory for message catalogs]) AS_IF([test x"${runstatedir}" = x""], [runstatedir="${pcmk_runstatedir}"]) expand_path_option runstatedir "${localstatedir}/run" AC_DEFINE_UNQUOTED([PCMK_RUN_DIR], ["$runstatedir"], [Location for modifiable per-process data]) AC_SUBST(runstatedir) expand_path_option INITDIR AC_DEFINE_UNQUOTED([PCMK__LSB_INIT_DIR], ["$INITDIR"], [Location for LSB init scripts]) expand_path_option docdir "${datadir}/doc/${PACKAGE}-${VERSION}" AC_SUBST(docdir) expand_path_option CONFIGDIR "${sysconfdir}/sysconfig" AC_SUBST(CONFIGDIR) expand_path_option PCMK__COROSYNC_CONF "${sysconfdir}/corosync/corosync.conf" AC_SUBST(PCMK__COROSYNC_CONF) expand_path_option CRM_LOG_DIR "${localstatedir}/log/pacemaker" AC_DEFINE_UNQUOTED(CRM_LOG_DIR,"$CRM_LOG_DIR", Location for Pacemaker log file) AC_SUBST(CRM_LOG_DIR) expand_path_option CRM_BUNDLE_DIR "${localstatedir}/log/pacemaker/bundles" AC_DEFINE_UNQUOTED(CRM_BUNDLE_DIR,"$CRM_BUNDLE_DIR", Location for Pacemaker bundle logs) AC_SUBST(CRM_BUNDLE_DIR) expand_path_option PCMK__FENCE_BINDIR AC_DEFINE_UNQUOTED(PCMK__FENCE_BINDIR,"$PCMK__FENCE_BINDIR", [Location for executable fence agents]) expand_path_option OCF_RA_PATH AC_DEFINE_UNQUOTED([OCF_RA_PATH], ["$OCF_RA_PATH"], [OCF directories to search for resource agents ]) AS_IF([test x"${PCMK_GNUTLS_PRIORITIES}" != x""], [], [AC_MSG_ERROR([--with-gnutls-priorities value must not be empty])]) AC_DEFINE_UNQUOTED([PCMK_GNUTLS_PRIORITIES], ["$PCMK_GNUTLS_PRIORITIES"], [GnuTLS cipher priorities]) AS_IF([test x"${BUG_URL}" = x""], [BUG_URL="https://bugs.clusterlabs.org/enter_bug.cgi?product=Pacemaker"]) AC_SUBST(BUG_URL) AC_DEFINE_UNQUOTED([PCMK__BUG_URL], ["$BUG_URL"], [Where bugs should be reported]) for j in prefix exec_prefix bindir sbindir libexecdir datadir sysconfdir \ sharedstatedir localstatedir libdir includedir oldincludedir infodir \ mandir INITDIR docdir CONFIGDIR localedir do dirname=`eval echo '${'${j}'}'` AS_IF([test ! -d "$dirname"], [AC_MSG_WARN([$j directory ($dirname) does not exist (yet)])]) done us_auth= AC_CHECK_HEADER([sys/socket.h], [ AC_CHECK_DECL([SO_PEERCRED], [ # Linux AC_CHECK_TYPE([struct ucred], [ us_auth=peercred_ucred; AC_DEFINE([HAVE_UCRED], [1], [Define if Unix socket auth method is getsockopt(s, SO_PEERCRED, &ucred, ...)]) ], [ # OpenBSD AC_CHECK_TYPE([struct sockpeercred], [ us_auth=localpeercred_sockepeercred; AC_DEFINE([HAVE_SOCKPEERCRED], [1], [Define if Unix socket auth method is getsockopt(s, SO_PEERCRED, &sockpeercred, ...)]) ], [], [[#include ]]) ], [[#define _GNU_SOURCE #include ]]) ], [], [[#include ]]) ]) AS_IF([test -z "${us_auth}"], [ # FreeBSD AC_CHECK_DECL([getpeereid], [ us_auth=getpeereid; AC_DEFINE([HAVE_GETPEEREID], [1], [Define if Unix socket auth method is getpeereid(s, &uid, &gid)]) ], [ # Solaris/OpenIndiana AC_CHECK_DECL([getpeerucred], [ us_auth=getpeerucred; AC_DEFINE([HAVE_GETPEERUCRED], [1], [Define if Unix socket auth method is getpeercred(s, &ucred)]) ], [ AC_MSG_FAILURE([No way to authenticate a Unix socket peer]) ], [[#include ]]) ]) ]) dnl OS-based decision-making is poor autotools practice; feature-based dnl mechanisms are strongly preferred. Keep this section to a bare minimum; dnl regard as a "necessary evil". INIT_EXT="" PROCFS=0 dnl Solaris and some *BSD versions support procfs but not files we need AS_CASE(["$host_os"], [*bsd*], [INIT_EXT=".sh"], [*linux*], [PROCFS=1], [darwin*], [ LIBS="$LIBS -L${prefix}/lib" CFLAGS="$CFLAGS -I${prefix}/include" ]) AC_SUBST(INIT_EXT) AM_CONDITIONAL([SUPPORT_PROCFS], [test $PROCFS -eq 1]) AC_DEFINE_UNQUOTED([HAVE_LINUX_PROCFS], [$PROCFS], [Define to 1 if procfs is supported]) AS_CASE(["$host_cpu"], [ppc64|powerpc64], [ AS_CASE([$CFLAGS], [*powerpc64*], [], [*], [AS_IF([test x"$GCC" = x"yes"], [CFLAGS="$CFLAGS -m64"]) ]) ]) dnl =============================================== dnl Program Paths dnl =============================================== PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin" export PATH dnl Pacemaker's executable python scripts will invoke the python specified by dnl configure's PYTHON variable. If not specified, AM_PATH_PYTHON will check a dnl built-in list with (unversioned) "python" having precedence. To configure dnl Pacemaker to use a specific python interpreter version, define PYTHON dnl when calling configure, for example: ./configure PYTHON=/usr/bin/python3.6 dnl Ensure PYTHON is an absolute path AS_IF([test x"${PYTHON}" != x""], [AC_PATH_PROG([PYTHON], [$PYTHON])]) dnl Require a minimum Python version AM_PATH_PYTHON([3.4]) AC_PATH_PROGS([ASCIIDOC_CONV], [asciidoc asciidoctor]) AC_PATH_PROG([HELP2MAN], [help2man]) AC_PATH_PROG([SPHINX], [sphinx-build]) AC_PATH_PROG([INKSCAPE], [inkscape]) AC_PATH_PROG([XSLTPROC], [xsltproc]) AC_PATH_PROG([XMLCATALOG], [xmlcatalog]) dnl Bash is needed for building man pages and running regression tests. dnl BASH is already an environment variable, so use something else. AC_PATH_PROG([BASH_PATH], [bash]) AS_IF([test x"${BASH_PATH}" != x""], [], [AC_MSG_FAILURE([Could not find required build tool bash])]) AC_PATH_PROGS(VALGRIND_BIN, valgrind, /usr/bin/valgrind) AC_DEFINE_UNQUOTED(VALGRIND_BIN, "$VALGRIND_BIN", Valgrind command) AM_CONDITIONAL(BUILD_HELP, test x"${HELP2MAN}" != x"") AS_IF([test x"${HELP2MAN}" != x""], [PCMK_FEATURES="$PCMK_FEATURES generated-manpages"]) MANPAGE_XSLT="" AS_IF([test x"${XSLTPROC}" != x""], [ AC_MSG_CHECKING([for DocBook-to-manpage transform]) # first try to figure out correct template using xmlcatalog query, # resort to extensive (semi-deterministic) file search if that fails DOCBOOK_XSL_URI='http://docbook.sourceforge.net/release/xsl/current' DOCBOOK_XSL_PATH='manpages/docbook.xsl' MANPAGE_XSLT=$(${XMLCATALOG} "" ${DOCBOOK_XSL_URI}/${DOCBOOK_XSL_PATH} \ | sed -n 's|^file://||p;q') AS_IF([test x"${MANPAGE_XSLT}" = x""], [ DIRS=$(find "${datadir}" -name $(basename $(dirname ${DOCBOOK_XSL_PATH})) \ -type d 2>/dev/null | LC_ALL=C sort) XSLT=$(basename ${DOCBOOK_XSL_PATH}) for d in ${DIRS} do AS_IF([test -f "${d}/${XSLT}"], [ MANPAGE_XSLT="${d}/${XSLT}" break ]) done ]) ]) AC_MSG_RESULT([$MANPAGE_XSLT]) AC_SUBST(MANPAGE_XSLT) AM_CONDITIONAL(BUILD_XML_HELP, test x"${MANPAGE_XSLT}" != x"") AS_IF([test x"${MANPAGE_XSLT}" != x""], [PCMK_FEATURES="$PCMK_FEATURES agent-manpages"]) AM_CONDITIONAL([IS_ASCIIDOC], [echo "${ASCIIDOC_CONV}" | grep -Eq 'asciidoc$']) AM_CONDITIONAL([BUILD_ASCIIDOC], [test "x${ASCIIDOC_CONV}" != x]) AS_IF([test x"${ASCIIDOC_CONV}" != x""], [PCMK_FEATURES="$PCMK_FEATURES ascii-docs"]) AM_CONDITIONAL([BUILD_SPHINX_DOCS], [test x"${SPHINX}" != x"" && test x"${INKSCAPE}" != x""]) AM_COND_IF([BUILD_SPHINX_DOCS], [PCMK_FEATURES="$PCMK_FEATURES books"]) dnl Pacemaker's shell scripts (and thus man page builders) rely on GNU getopt AC_MSG_CHECKING([for GNU-compatible getopt]) IFS_orig=$IFS IFS=: for PATH_DIR in $PATH do IFS=$IFS_orig GETOPT_PATH="${PATH_DIR}/getopt" AS_IF([test -f "$GETOPT_PATH" && test -x "$GETOPT_PATH"], [ $GETOPT_PATH -T >/dev/null 2>/dev/null AS_IF([test $? -eq 4], [break]) ]) GETOPT_PATH="" done IFS=$IFS_orig AS_IF([test -n "$GETOPT_PATH"], [AC_MSG_RESULT([$GETOPT_PATH])], [ AC_MSG_RESULT([no]) AC_MSG_ERROR([Could not find required build tool GNU-compatible getopt]) ]) AC_SUBST([GETOPT_PATH]) dnl ======================================================================== dnl checks for library functions to replace them dnl dnl NoSuchFunctionName: dnl is a dummy function which no system supplies. It is here to make dnl the system compile semi-correctly on OpenBSD which doesn't know dnl how to create an empty archive dnl dnl scandir: Only on BSD. dnl System-V systems may have it, but hidden and/or deprecated. dnl A replacement function is supplied for it. dnl dnl strerror: returns a string that corresponds to an errno. dnl A replacement function is supplied for it. dnl dnl strnlen: is a gnu function similar to strlen, but safer. dnl We wrote a tolerably-fast replacement function for it. dnl dnl strndup: is a gnu function similar to strdup, but safer. dnl We wrote a tolerably-fast replacement function for it. AC_REPLACE_FUNCS(alphasort NoSuchFunctionName scandir strerror strchrnul strnlen strndup) dnl =============================================== dnl Libraries dnl =============================================== AC_CHECK_LIB(socket, socket) dnl -lsocket AC_CHECK_LIB(c, dlopen) dnl if dlopen is in libc... AC_CHECK_LIB(dl, dlopen) dnl -ldl (for Linux) AC_CHECK_LIB(rt, sched_getscheduler) dnl -lrt (for Tru64) AC_CHECK_LIB(gnugetopt, getopt_long) dnl -lgnugetopt ( if available ) AC_CHECK_LIB(pam, pam_start) dnl -lpam (if available) PKG_CHECK_MODULES([UUID], [uuid], [CPPFLAGS="${CPPFLAGS} ${UUID_CFLAGS}" LIBS="${LIBS} ${UUID_LIBS}"]) AC_CHECK_FUNCS([sched_setscheduler]) AS_IF([test x"$ac_cv_func_sched_setscheduler" != x"yes"], [PC_LIBS_RT=""], [PC_LIBS_RT="-lrt"]) AC_SUBST(PC_LIBS_RT) # Require minimum glib version PKG_CHECK_MODULES([GLIB], [glib-2.0 >= 2.42.0], [CPPFLAGS="${CPPFLAGS} ${GLIB_CFLAGS}" LIBS="${LIBS} ${GLIB_LIBS}"]) # Check whether high-resolution sleep function is available AC_CHECK_FUNCS([nanosleep usleep]) # # Where is dlopen? # AS_IF([test x"$ac_cv_lib_c_dlopen" = x"yes"], [LIBADD_DL=""], [test x"$ac_cv_lib_dl_dlopen" = x"yes"], [LIBADD_DL=-ldl], [LIBADD_DL=${lt_cv_dlopen_libs}]) PKG_CHECK_MODULES(LIBXML2, [libxml-2.0], [CPPFLAGS="${CPPFLAGS} ${LIBXML2_CFLAGS}" LIBS="${LIBS} ${LIBXML2_LIBS}"]) REQUIRE_LIB([xslt], [xsltApplyStylesheet]) dnl ======================================================================== dnl Headers dnl ======================================================================== # Some distributions insert #warnings into deprecated headers. If we will # enable fatal warnings for the build, then enable them for the header checks # as well, otherwise the build could fail even though the header check # succeeds. (We should probably be doing this in more places.) cc_temp_flags "$CFLAGS $WERROR" # Optional headers (inclusion of these should be conditional in C code) AC_CHECK_HEADERS([linux/swab.h]) AC_CHECK_HEADERS([stddef.h]) AC_CHECK_HEADERS([sys/signalfd.h]) AC_CHECK_HEADERS([uuid/uuid.h]) AC_CHECK_HEADERS([security/pam_appl.h pam/pam_appl.h]) # Required headers REQUIRE_HEADER([arpa/inet.h]) REQUIRE_HEADER([ctype.h]) REQUIRE_HEADER([dirent.h]) REQUIRE_HEADER([errno.h]) REQUIRE_HEADER([glib.h]) REQUIRE_HEADER([grp.h]) REQUIRE_HEADER([limits.h]) REQUIRE_HEADER([netdb.h]) REQUIRE_HEADER([netinet/in.h]) REQUIRE_HEADER([netinet/ip.h], [ #include #include ]) REQUIRE_HEADER([pwd.h]) REQUIRE_HEADER([signal.h]) REQUIRE_HEADER([stdio.h]) REQUIRE_HEADER([stdlib.h]) REQUIRE_HEADER([string.h]) REQUIRE_HEADER([strings.h]) REQUIRE_HEADER([sys/ioctl.h]) REQUIRE_HEADER([sys/param.h]) REQUIRE_HEADER([sys/reboot.h]) REQUIRE_HEADER([sys/resource.h]) REQUIRE_HEADER([sys/socket.h]) REQUIRE_HEADER([sys/stat.h]) REQUIRE_HEADER([sys/time.h]) REQUIRE_HEADER([sys/types.h]) REQUIRE_HEADER([sys/utsname.h]) REQUIRE_HEADER([sys/wait.h]) REQUIRE_HEADER([time.h]) REQUIRE_HEADER([unistd.h]) REQUIRE_HEADER([libxml/xpath.h]) REQUIRE_HEADER([libxslt/xslt.h]) cc_restore_flags AC_CHECK_FUNCS([uuid_unparse], [], [AC_MSG_FAILURE([Could not find required C function uuid_unparse()])]) AC_CACHE_CHECK([whether __progname and __progname_full are available], [pf_cv_var_progname], [AC_LINK_IFELSE( [AC_LANG_PROGRAM([[extern char *__progname, *__progname_full;]], [[__progname = "foo"; __progname_full = "foo bar";]])], [pf_cv_var_progname="yes"], [pf_cv_var_progname="no"] )] ) AS_IF([test x"$pf_cv_var_progname" = x"yes"], [AC_DEFINE(HAVE_PROGNAME,1,[Define to 1 if processes can change their name])]) dnl ======================================================================== dnl Generic declarations dnl ======================================================================== AC_CHECK_DECLS([CLOCK_MONOTONIC], [PCMK_FEATURES="$PCMK_FEATURES monotonic"], [], [[ #include ]]) dnl ======================================================================== dnl Unit test declarations dnl ======================================================================== AC_CHECK_DECLS([assert_float_equal], [], [], [[ #include #include #include #include ]]) cc_temp_flags "$CFLAGS -Wl,--wrap=uname" WRAPPABLE_UNAME="no" AC_MSG_CHECKING([if uname() can be wrapped]) AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include int __wrap_uname(struct utsname *buf) { return 100; } int main(int argc, char **argv) { struct utsname x; return uname(&x) == 100 ? 0 : 1; } ]])], [ WRAPPABLE_UNAME="yes" ], [ WRAPPABLE_UNAME="no"]) AC_MSG_RESULT([$WRAPPABLE_UNAME]) AM_CONDITIONAL([WRAPPABLE_UNAME], [test x"$WRAPPABLE_UNAME" = x"yes"]) cc_restore_flags dnl ======================================================================== dnl Structures dnl ======================================================================== AC_CHECK_MEMBERS([struct tm.tm_gmtoff],,,[[#include ]]) AC_CHECK_MEMBER([struct dirent.d_type], AC_DEFINE(HAVE_STRUCT_DIRENT_D_TYPE,1,[Define this if struct dirent has d_type]),, [#include ]) dnl ======================================================================== dnl Functions dnl ======================================================================== REQUIRE_FUNC([getopt]) REQUIRE_FUNC([setenv]) REQUIRE_FUNC([unsetenv]) REQUIRE_FUNC([vasprintf]) AC_CACHE_CHECK(whether sscanf supports %m, pf_cv_var_sscanf, AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include const char *s = "some-command-line-arg"; int main(int argc, char **argv) { char *name = NULL; int n = sscanf(s, "%ms", &name); return n == 1 ? 0 : 1; } ]])], pf_cv_var_sscanf="yes", pf_cv_var_sscanf="no", pf_cv_var_sscanf="no")) AS_IF([test x"$pf_cv_var_sscanf" = x"yes"], [AC_DEFINE([HAVE_SSCANF_M], [1], [Define to 1 if sscanf %m modifier is available])]) dnl ======================================================================== dnl bzip2 dnl ======================================================================== REQUIRE_HEADER([bzlib.h]) REQUIRE_LIB([bz2], [BZ2_bzBuffToBuffCompress]) dnl ======================================================================== dnl sighandler_t is missing from Illumos, Solaris11 systems dnl ======================================================================== AC_MSG_CHECKING([for sighandler_t]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[sighandler_t *f;]])], [ AC_MSG_RESULT([yes]) AC_DEFINE([HAVE_SIGHANDLER_T], [1], [Define to 1 if sighandler_t is available]) ], [AC_MSG_RESULT([no])]) dnl ======================================================================== dnl ncurses dnl ======================================================================== dnl dnl A few OSes (e.g. Linux) deliver a default "ncurses" alongside "curses". dnl Many non-Linux deliver "curses"; sites may add "ncurses". dnl dnl However, the source-code recommendation for both is to #include "curses.h" dnl (i.e. "ncurses" still wants the include to be simple, no-'n', "curses.h"). dnl dnl ncurses takes precedence. dnl AC_CHECK_HEADERS([curses.h curses/curses.h ncurses.h ncurses/ncurses.h]) dnl Although n-library is preferred, only look for it if the n-header was found. CURSESLIBS='' PC_NAME_CURSES="" PC_LIBS_CURSES="" AS_IF([test x"$ac_cv_header_ncurses_h" = x"yes"], [ AC_CHECK_LIB(ncurses, printw, [AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]) CURSESLIBS=`$PKG_CONFIG --libs ncurses` || CURSESLIBS='-lncurses' PC_NAME_CURSES="ncurses" ]) AS_IF([test x"$ac_cv_header_ncurses_ncurses_h" = x"yes"], [ AC_CHECK_LIB(ncurses, printw, [AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]) CURSESLIBS=`$PKG_CONFIG --libs ncurses` || CURSESLIBS='-lncurses' PC_NAME_CURSES="ncurses" ]) dnl Only look for non-n-library if there was no n-library. AS_IF([test x"$CURSESLIBS" = x"" && test x"$ac_cv_header_curses_h" = x"yes"], [ AC_CHECK_LIB(curses, printw, [CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]) PC_LIBS_CURSES="$CURSESLIBS" ]) dnl Only look for non-n-library if there was no n-library. AS_IF([test x"$CURSESLIBS" = x"" && test x"$ac_cv_header_curses_curses_h" = x"yes"], [ AC_CHECK_LIB(curses, printw, [CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]) PC_LIBS_CURSES="$CURSESLIBS" ]) AS_IF([test x"$CURSESLIBS" != x""], [PCMK_FEATURES="$PCMK_FEATURES ncurses"]) dnl Check for printw() prototype compatibility AS_IF([test x"$CURSESLIBS" != x"" && cc_supports_flag -Wcast-qual], [ ac_save_LIBS=$LIBS LIBS="$CURSESLIBS" # avoid broken test because of hardened build environment in Fedora 23+ # - https://fedoraproject.org/wiki/Changes/Harden_All_Packages # - https://bugzilla.redhat.com/1297985 AS_IF([cc_supports_flag -fPIC], [cc_temp_flags "-Wcast-qual $WERROR -fPIC"], [cc_temp_flags "-Wcast-qual $WERROR"]) AC_MSG_CHECKING([whether curses library is compatible]) AC_LINK_IFELSE( [AC_LANG_PROGRAM([ #if defined(HAVE_NCURSES_H) # include #elif defined(HAVE_NCURSES_NCURSES_H) # include #elif defined(HAVE_CURSES_H) # include #endif ], [printw((const char *)"Test");] )], [AC_MSG_RESULT([yes])], [ AC_MSG_RESULT([no]) AC_MSG_WARN(m4_normalize([Disabling curses because the printw() function of your (n)curses library is old. If you wish to enable curses, update to a newer version (ncurses 5.4 or later is recommended, available from https://invisible-island.net/ncurses/) ])) AC_DEFINE([HAVE_INCOMPATIBLE_PRINTW], [1], [Define to 1 if curses library has incompatible printw()]) ] ) LIBS=$ac_save_LIBS cc_restore_flags ]) AC_SUBST(CURSESLIBS) AC_SUBST(PC_NAME_CURSES) AC_SUBST(PC_LIBS_CURSES) dnl ======================================================================== dnl Profiling and GProf dnl ======================================================================== CFLAGS_ORIG="$CFLAGS" AS_IF([test $with_coverage -ne $DISABLED], [ with_profiling=$REQUIRED PCMK_FEATURES="$PCMK_FEATURES coverage" CFLAGS="$CFLAGS -fprofile-arcs -ftest-coverage" dnl During linking, make sure to specify -lgcov or -coverage ] ) AS_IF([test $with_profiling -ne $DISABLED], [ with_profiling=$REQUIRED PCMK_FEATURES="$PCMK_FEATURES profile" dnl Disable various compiler optimizations CFLAGS="$CFLAGS -fno-omit-frame-pointer -fno-inline -fno-builtin" dnl CFLAGS="$CFLAGS -fno-inline-functions" dnl CFLAGS="$CFLAGS -fno-default-inline" dnl CFLAGS="$CFLAGS -fno-inline-functions-called-once" dnl CFLAGS="$CFLAGS -fno-optimize-sibling-calls" dnl Turn off optimization so tools can get accurate line numbers CFLAGS=`echo $CFLAGS | sed \ -e 's/-O.\ //g' \ -e 's/-Wp,-D_FORTIFY_SOURCE=.\ //g' \ -e 's/-D_FORTIFY_SOURCE=.\ //g'` CFLAGS="$CFLAGS -O0 -g3 -gdwarf-2" AC_MSG_NOTICE([CFLAGS before adding profiling options: $CFLAGS_ORIG]) AC_MSG_NOTICE([CFLAGS after: $CFLAGS]) ] ) AC_DEFINE_UNQUOTED([SUPPORT_PROFILING], [$with_profiling], [Support profiling]) AM_CONDITIONAL([BUILD_PROFILING], [test "$with_profiling" = "$REQUIRED"]) dnl ======================================================================== dnl Cluster infrastructure - LibQB dnl ======================================================================== PKG_CHECK_MODULES(libqb, libqb >= 0.17) CPPFLAGS="$libqb_CFLAGS $CPPFLAGS" LIBS="$libqb_LIBS $LIBS" dnl libqb 2.0.5+ (2022-03) AC_CHECK_FUNCS([qb_ipcc_connect_async]) dnl libqb 2.0.2+ (2020-10) AC_CHECK_FUNCS([qb_ipcc_auth_get]) dnl libqb 2.0.0+ (2020-05) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_MAX_LINE_LEN]) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_ELLIPSIS]) dnl Support Linux-HA fence agents if available AS_IF([test x"$cross_compiling" != x"yes"], [CPPFLAGS="$CPPFLAGS -I${prefix}/include/heartbeat"]) AC_CHECK_HEADERS([stonith/stonith.h], [ AC_CHECK_LIB([pils], [PILLoadPlugin]) AC_CHECK_LIB([plumb], [G_main_add_IPC_Channel]) PCMK_FEATURES="$PCMK_FEATURES lha" ]) AM_CONDITIONAL([BUILD_LHA_SUPPORT], [test x"$ac_cv_header_stonith_stonith_h" = x"yes"]) dnl =============================================== dnl Variables needed for substitution dnl =============================================== CRM_SCHEMA_DIRECTORY="${datadir}/pacemaker" AC_DEFINE_UNQUOTED(CRM_SCHEMA_DIRECTORY,"$CRM_SCHEMA_DIRECTORY", Location for the Pacemaker Relax-NG Schema) AC_SUBST(CRM_SCHEMA_DIRECTORY) CRM_CORE_DIR="${localstatedir}/lib/pacemaker/cores" AC_DEFINE_UNQUOTED([CRM_CORE_DIR], ["$CRM_CORE_DIR"], [Directory Pacemaker daemons should change to (without systemd, core files will go here)]) AC_SUBST(CRM_CORE_DIR) AS_IF([test x"${CRM_DAEMON_USER}" = x""], [CRM_DAEMON_USER="hacluster"]) AC_DEFINE_UNQUOTED(CRM_DAEMON_USER,"$CRM_DAEMON_USER", User to run Pacemaker daemons as) AC_SUBST(CRM_DAEMON_USER) AS_IF([test x"${CRM_DAEMON_GROUP}" = x""], [CRM_DAEMON_GROUP="haclient"]) AC_DEFINE_UNQUOTED(CRM_DAEMON_GROUP,"$CRM_DAEMON_GROUP", Group to run Pacemaker daemons as) AC_SUBST(CRM_DAEMON_GROUP) CRM_PACEMAKER_DIR=${localstatedir}/lib/pacemaker AC_DEFINE_UNQUOTED(CRM_PACEMAKER_DIR,"$CRM_PACEMAKER_DIR", Location to store directory produced by Pacemaker daemons) AC_SUBST(CRM_PACEMAKER_DIR) CRM_BLACKBOX_DIR=${localstatedir}/lib/pacemaker/blackbox AC_DEFINE_UNQUOTED(CRM_BLACKBOX_DIR,"$CRM_BLACKBOX_DIR", Where to keep blackbox dumps) AC_SUBST(CRM_BLACKBOX_DIR) PE_STATE_DIR="${localstatedir}/lib/pacemaker/pengine" AC_DEFINE_UNQUOTED(PE_STATE_DIR,"$PE_STATE_DIR", Where to keep scheduler outputs) AC_SUBST(PE_STATE_DIR) CRM_CONFIG_DIR="${localstatedir}/lib/pacemaker/cib" AC_DEFINE_UNQUOTED(CRM_CONFIG_DIR,"$CRM_CONFIG_DIR", Where to keep configuration files) AC_SUBST(CRM_CONFIG_DIR) CRM_DAEMON_DIR="${libexecdir}/pacemaker" AC_DEFINE_UNQUOTED(CRM_DAEMON_DIR,"$CRM_DAEMON_DIR", Location for Pacemaker daemons) AC_SUBST(CRM_DAEMON_DIR) CRM_STATE_DIR="${runstatedir}/crm" AC_DEFINE_UNQUOTED([CRM_STATE_DIR], ["$CRM_STATE_DIR"], [Where to keep state files and sockets]) AC_SUBST(CRM_STATE_DIR) CRM_RSCTMP_DIR="${runstatedir}/resource-agents" AC_DEFINE_UNQUOTED(CRM_RSCTMP_DIR,"$CRM_RSCTMP_DIR", Where resource agents should keep state files) AC_SUBST(CRM_RSCTMP_DIR) PACEMAKER_CONFIG_DIR="${sysconfdir}/pacemaker" AC_DEFINE_UNQUOTED(PACEMAKER_CONFIG_DIR,"$PACEMAKER_CONFIG_DIR", Where to keep configuration files like authkey) AC_SUBST(PACEMAKER_CONFIG_DIR) AC_DEFINE_UNQUOTED(SBIN_DIR,"$sbindir",[Location for system binaries]) AC_PATH_PROGS(GIT, git false) AC_MSG_CHECKING([build version]) BUILD_VERSION=$Format:%h$ AS_IF([test $BUILD_VERSION != ":%h$"], [AC_MSG_RESULT([$BUILD_VERSION (archive hash)])], [test -x $GIT && test -d .git], [ BUILD_VERSION=`$GIT log --pretty="format:%h" -n 1` AC_MSG_RESULT([$BUILD_VERSION (git hash)]) ], [ # The current directory name make a reasonable default # Most generated archives will include the hash or tag BASE=`basename $PWD` BUILD_VERSION=`echo $BASE | sed s:.*[[Pp]]acemaker-::` AC_MSG_RESULT([$BUILD_VERSION (directory name)]) ]) AC_DEFINE_UNQUOTED(BUILD_VERSION, "$BUILD_VERSION", Build version) AC_SUBST(BUILD_VERSION) HAVE_dbus=1 PKG_CHECK_MODULES([DBUS], [dbus-1], [CPPFLAGS="${CPPFLAGS} ${DBUS_CFLAGS}"], [HAVE_dbus=0]) AC_DEFINE_UNQUOTED(HAVE_DBUS, $HAVE_dbus, Support dbus) AM_CONDITIONAL(BUILD_DBUS, test $HAVE_dbus = 1) dnl libdbus 1.5.12+ (2012-03) / 1.6.0+ (2012-06) AC_CHECK_TYPES([DBusBasicValue],,,[[#include ]]) AS_IF([test $HAVE_dbus = 0], [PC_NAME_DBUS=""], [PC_NAME_DBUS="dbus-1"]) AC_SUBST(PC_NAME_DBUS) AS_CASE([$enable_systemd], [$REQUIRED], [ AS_IF([test $HAVE_dbus = 0], [AC_MSG_FAILURE([Cannot support systemd resources without DBus])]) AS_IF([test "$ac_cv_have_decl_CLOCK_MONOTONIC" = "no"], [AC_MSG_FAILURE([Cannot support systemd resources without monotonic clock])]) AS_IF([check_systemdsystemunitdir], [], [AC_MSG_FAILURE([Cannot support systemd resources without systemdsystemunitdir])]) ], [$OPTIONAL], [ AS_IF([test $HAVE_dbus = 0 \ || test x"$ac_cv_have_decl_CLOCK_MONOTONIC" = x"no"], [enable_systemd=$DISABLED], [ AC_MSG_CHECKING([for systemd version (using dbus-send)]) ret=$({ dbus-send --system --print-reply \ --dest=org.freedesktop.systemd1 \ /org/freedesktop/systemd1 \ org.freedesktop.DBus.Properties.Get \ string:org.freedesktop.systemd1.Manager \ string:Version 2>/dev/null \ || echo "version unavailable"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) AS_IF([test x"$ret" != x"unavailable" \ || systemctl --version 2>/dev/null | grep -q systemd], [ AS_IF([check_systemdsystemunitdir], [enable_systemd=$REQUIRED], [enable_systemd=$DISABLED]) ], [enable_systemd=$DISABLED] ) ]) ], ) AC_MSG_CHECKING([whether to enable support for managing resources via systemd]) AS_IF([test $enable_systemd -eq $DISABLED], [AC_MSG_RESULT([no])], [ AC_MSG_RESULT([yes]) PCMK_FEATURES="$PCMK_FEATURES systemd" ] ) AC_SUBST([systemdsystemunitdir]) AC_DEFINE_UNQUOTED([SUPPORT_SYSTEMD], [$enable_systemd], [Support systemd resources]) AM_CONDITIONAL([BUILD_SYSTEMD], [test $enable_systemd = $REQUIRED]) AC_SUBST(SUPPORT_SYSTEMD) AS_CASE([$enable_upstart], [$REQUIRED], [ AS_IF([test $HAVE_dbus = 0], [AC_MSG_FAILURE([Cannot support Upstart resources without DBus])]) ], [$OPTIONAL], [ AS_IF([test $HAVE_dbus = 0], [enable_upstart=$DISABLED], [ AC_MSG_CHECKING([for Upstart version (using dbus-send)]) ret=$({ dbus-send --system --print-reply \ --dest=com.ubuntu.Upstart \ /com/ubuntu/Upstart org.freedesktop.DBus.Properties.Get \ string:com.ubuntu.Upstart0_6 string:version 2>/dev/null \ || echo "version unavailable"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) AS_IF([test x"$ret" != x"unavailable" \ || initctl --version 2>/dev/null | grep -q upstart], [enable_upstart=$REQUIRED], [enable_upstart=$DISABLED] ) ]) ], ) AC_MSG_CHECKING([whether to enable support for managing resources via Upstart]) AS_IF([test $enable_upstart -eq $DISABLED], [AC_MSG_RESULT([no])], [ AC_MSG_RESULT([yes]) PCMK_FEATURES="$PCMK_FEATURES upstart" ] ) AC_DEFINE_UNQUOTED([SUPPORT_UPSTART], [$enable_upstart], [Support Upstart resources]) AM_CONDITIONAL([BUILD_UPSTART], [test $enable_upstart -eq $REQUIRED]) AC_SUBST(SUPPORT_UPSTART) AS_CASE([$with_nagios], [$REQUIRED], [ AS_IF([test x"$ac_cv_have_decl_CLOCK_MONOTONIC" = x"no"], [AC_MSG_FAILURE([Cannot support nagios resources without monotonic clock])]) ], [$OPTIONAL], [ AS_IF([test x"$ac_cv_have_decl_CLOCK_MONOTONIC" = x"no"], [with_nagios=$DISABLED], [with_nagios=$REQUIRED]) ] ) AS_IF([test $with_nagios -eq $REQUIRED], [PCMK_FEATURES="$PCMK_FEATURES nagios"]) AC_DEFINE_UNQUOTED([SUPPORT_NAGIOS], [$with_nagios], [Support nagios plugins]) AM_CONDITIONAL([BUILD_NAGIOS], [test $with_nagios -eq $REQUIRED]) AS_IF([test x"$NAGIOS_PLUGIN_DIR" = x""], [NAGIOS_PLUGIN_DIR="${libexecdir}/nagios/plugins"]) AC_DEFINE_UNQUOTED(NAGIOS_PLUGIN_DIR, "$NAGIOS_PLUGIN_DIR", Directory for nagios plugins) AC_SUBST(NAGIOS_PLUGIN_DIR) AS_IF([test x"$NAGIOS_METADATA_DIR" = x""], [NAGIOS_METADATA_DIR="${datadir}/nagios/plugins-metadata"]) AC_DEFINE_UNQUOTED(NAGIOS_METADATA_DIR, "$NAGIOS_METADATA_DIR", Directory for nagios plugins metadata) AC_SUBST(NAGIOS_METADATA_DIR) STACKS="" CLUSTERLIBS="" PC_NAME_CLUSTER="" dnl ======================================================================== dnl Cluster stack - Corosync dnl ======================================================================== COROSYNC_LIBS="" AS_CASE([$with_corosync], [$REQUIRED], [ # These will be fatal if unavailable PKG_CHECK_MODULES([cpg], [libcpg]) PKG_CHECK_MODULES([cfg], [libcfg]) PKG_CHECK_MODULES([cmap], [libcmap]) PKG_CHECK_MODULES([quorum], [libquorum]) PKG_CHECK_MODULES([libcorosync_common], [libcorosync_common]) ] [$OPTIONAL], [ PKG_CHECK_MODULES([cpg], [libcpg], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([cfg], [libcfg], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([cmap], [libcmap], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([quorum], [libquorum], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([libcorosync_common], [libcorosync_common], [], [with_corosync=$DISABLED]) AS_IF([test $with_corosync -ne $DISABLED], [with_corosync=$REQUIRED]) ] ) AS_IF([test $with_corosync -ne $DISABLED], [ AC_MSG_CHECKING([for Corosync 2 or later]) AC_MSG_RESULT([yes]) CFLAGS="$CFLAGS $libqb_CFLAGS $cpg_CFLAGS $cfg_CFLAGS $cmap_CFLAGS $quorum_CFLAGS $libcorosync_common_CFLAGS" CPPFLAGS="$CPPFLAGS `$PKG_CONFIG --cflags-only-I corosync`" COROSYNC_LIBS="$COROSYNC_LIBS $cpg_LIBS $cfg_LIBS $cmap_LIBS $quorum_LIBS $libcorosync_common_LIBS" CLUSTERLIBS="$CLUSTERLIBS $COROSYNC_LIBS" PC_NAME_CLUSTER="$PC_CLUSTER_NAME libcfg libcmap libcorosync_common libcpg libquorum" STACKS="$STACKS corosync-ge-2" dnl Shutdown tracking added (back) to corosync Jan 2021 saved_LIBS="$LIBS" LIBS="$LIBS $COROSYNC_LIBS" AC_CHECK_FUNCS([corosync_cfg_trackstart]) LIBS="$saved_LIBS" ] ) AC_DEFINE_UNQUOTED([SUPPORT_COROSYNC], [$with_corosync], [Support the Corosync messaging and membership layer]) AM_CONDITIONAL([BUILD_CS_SUPPORT], [test $with_corosync -eq $REQUIRED]) AC_SUBST([SUPPORT_COROSYNC]) dnl dnl Cluster stack - Sanity dnl AS_IF([test x"$STACKS" != x""], [AC_MSG_NOTICE([Supported stacks:${STACKS}])], [AC_MSG_FAILURE([At least one cluster stack must be supported])]) PCMK_FEATURES="${PCMK_FEATURES}${STACKS}" AC_SUBST(CLUSTERLIBS) AC_SUBST(PC_NAME_CLUSTER) dnl ======================================================================== dnl CIB secrets dnl ======================================================================== AS_IF([test $with_cibsecrets -ne $DISABLED], [ with_cibsecrets=$REQUIRED PCMK_FEATURES="$PCMK_FEATURES cibsecrets" LRM_CIBSECRETS_DIR="${localstatedir}/lib/pacemaker/lrm/secrets" AC_DEFINE_UNQUOTED([LRM_CIBSECRETS_DIR], ["$LRM_CIBSECRETS_DIR"], [Location for CIB secrets]) AC_SUBST([LRM_CIBSECRETS_DIR]) ] ) AC_DEFINE_UNQUOTED([SUPPORT_CIBSECRETS], [$with_cibsecrets], [Support CIB secrets]) AM_CONDITIONAL([BUILD_CIBSECRETS], [test $with_cibsecrets -eq $REQUIRED]) dnl ======================================================================== dnl GnuTLS dnl ======================================================================== dnl Require GnuTLS >=2.12.0 (2011-03) for Pacemaker Remote support PC_NAME_GNUTLS="" AS_CASE([$with_gnutls], [$REQUIRED], [ REQUIRE_LIB([gnutls], [gnutls_sec_param_to_pk_bits]) REQUIRE_HEADER([gnutls/gnutls.h]) ], [$OPTIONAL], [ AC_CHECK_LIB([gnutls], [gnutls_sec_param_to_pk_bits], [], [with_gnutls=$DISABLED]) AC_CHECK_HEADERS([gnutls/gnutls.h], [], [with_gnutls=$DISABLED]) ] ) AS_IF([test $with_gnutls -ne $DISABLED], [ PC_NAME_GNUTLS="gnutls" PCMK_FEATURES="$PCMK_FEATURES remote" ] ) AC_SUBST([PC_NAME_GNUTLS]) AM_CONDITIONAL([BUILD_REMOTE], [test $with_gnutls -ne $DISABLED]) # --- ASAN/UBSAN/TSAN (see man gcc) --- # when using SANitizers, we need to pass the -fsanitize.. # to both CFLAGS and LDFLAGS. The CFLAGS/LDFLAGS must be # specified as first in the list or there will be runtime # issues (for example user has to LD_PRELOAD asan for it to work # properly). AS_IF([test -n "${SANITIZERS}"], [ SANITIZERS=$(echo $SANITIZERS | sed -e 's/,/ /g') for SANITIZER in $SANITIZERS do AS_CASE([$SANITIZER], [asan|ASAN], [ SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=address" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=address -lasan" PCMK_FEATURES="$PCMK_FEATURES asan" REQUIRE_LIB([asan],[main]) ], [ubsan|UBSAN], [ SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=undefined" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=undefined -lubsan" PCMK_FEATURES="$PCMK_FEATURES ubsan" REQUIRE_LIB([ubsan],[main]) ], [tsan|TSAN], [ SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=thread" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=thread -ltsan" PCMK_FEATURES="$PCMK_FEATURES tsan" REQUIRE_LIB([tsan],[main]) ]) done ]) dnl ======================================================================== dnl Compiler flags dnl ======================================================================== dnl Make sure that CFLAGS is not exported. If the user did dnl not have CFLAGS in their environment then this should have dnl no effect. However if CFLAGS was exported from the user's dnl environment, then the new CFLAGS will also be exported dnl to sub processes. AS_IF([export | fgrep " CFLAGS=" > /dev/null], [ SAVED_CFLAGS="$CFLAGS" unset CFLAGS CFLAGS="$SAVED_CFLAGS" unset SAVED_CFLAGS ]) CC_EXTRAS="" AS_IF([test x"$GCC" != x"yes"], [CFLAGS="$CFLAGS -g"], [ CFLAGS="$CFLAGS -ggdb" dnl When we don't have diagnostic push / pull, we can't explicitly disable dnl checking for nonliteral formats in the places where they occur on purpose dnl thus we disable nonliteral format checking globally as we are aborting dnl on warnings. dnl what makes the things really ugly is that nonliteral format checking is dnl obviously available as an extra switch in very modern gcc but for older dnl gcc this is part of -Wformat=2 dnl so if we have push/pull we can enable -Wformat=2 -Wformat-nonliteral dnl if we don't have push/pull but -Wformat-nonliteral we can enable -Wformat=2 dnl otherwise none of both gcc_diagnostic_push_pull=no cc_temp_flags "$CFLAGS $WERROR" AC_MSG_CHECKING([for gcc diagnostic push / pull]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #pragma GCC diagnostic push #pragma GCC diagnostic pop ]])], [ AC_MSG_RESULT([yes]) gcc_diagnostic_push_pull=yes ], AC_MSG_RESULT([no])) cc_restore_flags AS_IF([cc_supports_flag "-Wformat-nonliteral"], [gcc_format_nonliteral=yes], [gcc_format_nonliteral=no]) # We had to eliminate -Wnested-externs because of libtool changes # Make sure to order options so that the former stand for prerequisites # of the latter (e.g., -Wformat-nonliteral requires -Wformat). EXTRA_FLAGS="-fgnu89-inline" EXTRA_FLAGS="$EXTRA_FLAGS -Wall" EXTRA_FLAGS="$EXTRA_FLAGS -Waggregate-return" EXTRA_FLAGS="$EXTRA_FLAGS -Wbad-function-cast" EXTRA_FLAGS="$EXTRA_FLAGS -Wcast-align" EXTRA_FLAGS="$EXTRA_FLAGS -Wdeclaration-after-statement" EXTRA_FLAGS="$EXTRA_FLAGS -Wendif-labels" EXTRA_FLAGS="$EXTRA_FLAGS -Wfloat-equal" EXTRA_FLAGS="$EXTRA_FLAGS -Wformat-security" EXTRA_FLAGS="$EXTRA_FLAGS -Wimplicit-fallthrough" EXTRA_FLAGS="$EXTRA_FLAGS -Wmissing-prototypes" EXTRA_FLAGS="$EXTRA_FLAGS -Wmissing-declarations" EXTRA_FLAGS="$EXTRA_FLAGS -Wnested-externs" EXTRA_FLAGS="$EXTRA_FLAGS -Wno-long-long" EXTRA_FLAGS="$EXTRA_FLAGS -Wno-strict-aliasing" EXTRA_FLAGS="$EXTRA_FLAGS -Wpointer-arith" EXTRA_FLAGS="$EXTRA_FLAGS -Wstrict-prototypes" EXTRA_FLAGS="$EXTRA_FLAGS -Wwrite-strings" EXTRA_FLAGS="$EXTRA_FLAGS -Wunused-but-set-variable" EXTRA_FLAGS="$EXTRA_FLAGS -Wunsigned-char" AS_IF([test x"$gcc_diagnostic_push_pull" = x"yes"], [ AC_DEFINE([HAVE_FORMAT_NONLITERAL], [], [gcc can complain about nonliterals in format]) EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2 -Wformat-nonliteral" ], [test x"$gcc_format_nonliteral" = x"yes"], [EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2"]) # Additional warnings it might be nice to enable one day # -Wshadow # -Wunreachable-code for j in $EXTRA_FLAGS do AS_IF([cc_supports_flag $CC_EXTRAS $j], [CC_EXTRAS="$CC_EXTRAS $j"]) done AC_MSG_NOTICE([Using additional gcc flags: ${CC_EXTRAS}]) ]) dnl dnl Hardening flags dnl dnl The prime control of whether to apply (targeted) hardening build flags and dnl which ones is --{enable,disable}-hardening option passed to ./configure: dnl dnl --enable-hardening=try (default): dnl depending on whether any of CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE, dnl CFLAGS_HARDENED_LIB or LDFLAGS_HARDENED_LIB environment variables dnl (see below) is set and non-null, all these custom flags (even if not dnl set) are used as are, otherwise the best effort is made to offer dnl reasonably strong hardening in several categories (RELRO, PIE, dnl "bind now", stack protector) according to what the selected toolchain dnl can offer dnl dnl --enable-hardening: dnl same effect as --enable-hardening=try when the environment variables dnl in question are suppressed dnl dnl --disable-hardening: dnl do not apply any targeted hardening measures at all dnl dnl The user-injected environment variables that regulate the hardening in dnl default case are as follows: dnl dnl * CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE dnl compiler and linker flags (respectively) for daemon programs dnl (pacemakerd, pacemaker-attrd, pacemaker-controld, pacemaker-execd, dnl pacemaker-based, pacemaker-fenced, pacemaker-remoted, dnl pacemaker-schedulerd) dnl dnl * CFLAGS_HARDENED_LIB, LDFLAGS_HARDENED_LIB dnl compiler and linker flags (respectively) for libraries linked dnl with the daemon programs dnl dnl Note that these are purposedly targeted variables (addressing particular dnl targets all over the scattered Makefiles) and have no effect outside of dnl the predestined scope (e.g., CLI utilities). For a global reach, dnl use CFLAGS, LDFLAGS, etc. as usual. dnl dnl For guidance on the suitable flags consult, for instance: dnl https://fedoraproject.org/wiki/Changes/Harden_All_Packages#Detailed_Harden_Flags_Description dnl https://owasp.org/index.php/C-Based_Toolchain_Hardening#GCC.2FBinutils dnl AS_IF([test $enable_hardening -eq $OPTIONAL], [ AS_IF([test "$(env | grep -Ec '^(C|LD)FLAGS_HARDENED_(EXE|LIB)=.')" = 0], [enable_hardening=$REQUIRED], [AC_MSG_NOTICE([Hardening: using custom flags from environment])] ) ], [ unset CFLAGS_HARDENED_EXE unset CFLAGS_HARDENED_LIB unset LDFLAGS_HARDENED_EXE unset LDFLAGS_HARDENED_LIB ] ) AS_CASE([$enable_hardening], [$DISABLED], [AC_MSG_NOTICE([Hardening: explicitly disabled])], [$REQUIRED], [ CFLAGS_HARDENED_EXE= CFLAGS_HARDENED_LIB= LDFLAGS_HARDENED_EXE= LDFLAGS_HARDENED_LIB= relro=0 pie=0 bindnow=0 stackprot="none" # daemons incl. libs: partial RELRO flag="-Wl,-z,relro" CC_CHECK_LDFLAGS(["${flag}"], [ LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}" relro=1 ]) # daemons: PIE for both CFLAGS and LDFLAGS AS_IF([cc_supports_flag -fPIE], [ flag="-pie" CC_CHECK_LDFLAGS(["${flag}"], [ CFLAGS_HARDENED_EXE="${CFLAGS_HARDENED_EXE} -fPIE" LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" pie=1 ]) ] ) # daemons incl. libs: full RELRO if sensible + as-needed linking # so as to possibly mitigate startup performance # hit caused by excessive linking with unneeded # libraries AS_IF([test "${relro}" = 1 && test "${pie}" = 1], [ flag="-Wl,-z,now" CC_CHECK_LDFLAGS(["${flag}"], [ LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}" bindnow=1 ]) ] ) AS_IF([test "${bindnow}" = 1], [ flag="-Wl,--as-needed" CC_CHECK_LDFLAGS(["${flag}"], [ LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}" ]) ]) # universal: prefer strong > all > default stack protector if possible flag= AS_IF([cc_supports_flag -fstack-protector-strong], [ flag="-fstack-protector-strong" stackprot="strong" ], [cc_supports_flag -fstack-protector-all], [ flag="-fstack-protector-all" stackprot="all" ], [cc_supports_flag -fstack-protector], [ flag="-fstack-protector" stackprot="default" ] ) AS_IF([test -n "${flag}"], [CC_EXTRAS="${CC_EXTRAS} ${flag}"]) # universal: enable stack clash protection if possible AS_IF([cc_supports_flag -fstack-clash-protection], [ CC_EXTRAS="${CC_EXTRAS} -fstack-clash-protection" AS_IF([test "${stackprot}" = "none"], [stackprot="clash-only"], [stackprot="${stackprot}+clash"] ) ] ) # Log a summary AS_IF([test "${relro}" = 1 || test "${pie}" = 1 || test x"${stackprot}" != x"none"], [AC_MSG_NOTICE(m4_normalize([Hardening: relro=${relro} pie=${pie} bindnow=${bindnow} stackprot=${stackprot}])) ], [AC_MSG_WARN([Hardening: no suitable features in the toolchain detected])] ) ], ) CFLAGS="$SANITIZERS_CFLAGS $CFLAGS $CC_EXTRAS" LDFLAGS="$SANITIZERS_LDFLAGS $LDFLAGS" CFLAGS_HARDENED_EXE="$SANITIZERS_CFLAGS $CFLAGS_HARDENED_EXE" LDFLAGS_HARDENED_EXE="$SANITIZERS_LDFLAGS $LDFLAGS_HARDENED_EXE" NON_FATAL_CFLAGS="$CFLAGS" AC_SUBST(NON_FATAL_CFLAGS) dnl dnl We reset CFLAGS to include our warnings *after* all function dnl checking goes on, so that our warning flags don't keep the dnl AC_*FUNCS() calls above from working. In particular, -Werror will dnl *always* cause us troubles if we set it before here. dnl dnl AS_IF([test $enable_fatal_warnings -ne $DISABLED], [ AC_MSG_NOTICE([Enabling fatal compiler warnings]) CFLAGS="$CFLAGS $WERROR" ]) AC_SUBST(CFLAGS) dnl This is useful for use in Makefiles that need to remove one specific flag CFLAGS_COPY="$CFLAGS" AC_SUBST(CFLAGS_COPY) AC_SUBST(LIBADD_DL) dnl extra flags for dynamic linking libraries AC_SUBST(LOCALE) dnl Options for cleaning up the compiler output AS_IF([test $enable_quiet -ne $DISABLED], [ AC_MSG_NOTICE([Suppressing make details]) QUIET_LIBTOOL_OPTS="--silent" QUIET_MAKE_OPTS="-s" # POSIX compliant ], [ QUIET_LIBTOOL_OPTS="" QUIET_MAKE_OPTS="" ] ) dnl Put the above variables to use LIBTOOL="${LIBTOOL} --tag=CC \$(QUIET_LIBTOOL_OPTS)" MAKEFLAGS="${MAKEFLAGS} ${QUIET_MAKE_OPTS}" # Make features list available (sorted alphabetically, without leading space) PCMK_FEATURES=`echo "$PCMK_FEATURES" | sed -e 's/^ //' -e 's/ /\n/g' | sort | xargs` AC_DEFINE_UNQUOTED(CRM_FEATURES, "$PCMK_FEATURES", Set of enabled features) AC_SUBST(PCMK_FEATURES) AC_SUBST(CC) AC_SUBST(MAKEFLAGS) AC_SUBST(LIBTOOL) AC_SUBST(QUIET_LIBTOOL_OPTS) dnl Files we output that need to be executable CONFIG_FILES_EXEC([cts/cts-attrd], [cts/cts-cli], [cts/cts-exec], [cts/cts-fencing], [cts/cts-regression], [cts/cts-scheduler], [cts/lxc_autogen.sh], [cts/benchmark/clubench], [cts/lab/CTSlab.py], [cts/lab/OCFIPraTest.py], [cts/lab/cluster_test], [cts/lab/cts], [cts/lab/cts-log-watcher], [cts/support/LSBDummy], [cts/support/cts-support], [cts/support/fence_dummy], [cts/support/pacemaker-cts-dummyd], [daemons/fenced/fence_legacy], [daemons/fenced/fence_watchdog], [doc/abi-check], [extra/resources/ClusterMon], [extra/resources/Dummy], [extra/resources/HealthCPU], [extra/resources/HealthIOWait], [extra/resources/HealthSMART], [extra/resources/Stateful], [extra/resources/SysInfo], [extra/resources/attribute], [extra/resources/controld], [extra/resources/ifspeed], [extra/resources/o2cb], [extra/resources/ping], [extra/resources/remote], [maint/bumplibs], + [tools/cluster-clean], + [tools/cluster-helper], + [tools/cluster-init], [tools/crm_failcount], [tools/crm_master], [tools/crm_report], [tools/crm_standby], [tools/cibsecret], [tools/pcmk_simtimes]) dnl Other files we output AC_CONFIG_FILES(Makefile \ cts/Makefile \ cts/benchmark/Makefile \ cts/lab/Makefile \ cts/scheduler/Makefile \ cts/scheduler/dot/Makefile \ cts/scheduler/exp/Makefile \ cts/scheduler/scores/Makefile \ cts/scheduler/stderr/Makefile \ cts/scheduler/summary/Makefile \ cts/scheduler/xml/Makefile \ cts/support/Makefile \ cts/support/pacemaker-cts-dummyd@.service \ daemons/Makefile \ daemons/attrd/Makefile \ daemons/based/Makefile \ daemons/controld/Makefile \ daemons/execd/Makefile \ daemons/execd/pacemaker_remote \ daemons/execd/pacemaker_remote.service \ daemons/fenced/Makefile \ daemons/pacemakerd/Makefile \ daemons/pacemakerd/pacemaker.combined.upstart \ daemons/pacemakerd/pacemaker.service \ daemons/pacemakerd/pacemaker.upstart \ daemons/schedulerd/Makefile \ devel/Makefile \ doc/Doxyfile \ doc/Makefile \ doc/sphinx/Makefile \ etc/Makefile \ etc/init.d/pacemaker \ etc/logrotate.d/pacemaker \ extra/Makefile \ extra/alerts/Makefile \ extra/resources/Makefile \ include/Makefile \ include/crm/Makefile \ include/crm/cib/Makefile \ include/crm/common/Makefile \ include/crm/cluster/Makefile \ include/crm/fencing/Makefile \ include/crm/pengine/Makefile \ include/pcmki/Makefile \ lib/Makefile \ lib/cib/Makefile \ lib/cluster/Makefile \ lib/common/Makefile \ lib/common/tests/Makefile \ lib/common/tests/acl/Makefile \ lib/common/tests/agents/Makefile \ lib/common/tests/cmdline/Makefile \ lib/common/tests/flags/Makefile \ lib/common/tests/health/Makefile \ lib/common/tests/io/Makefile \ lib/common/tests/iso8601/Makefile \ lib/common/tests/lists/Makefile \ lib/common/tests/nvpair/Makefile \ lib/common/tests/operations/Makefile \ lib/common/tests/options/Makefile \ lib/common/tests/output/Makefile \ lib/common/tests/procfs/Makefile \ lib/common/tests/results/Makefile \ lib/common/tests/scores/Makefile \ lib/common/tests/strings/Makefile \ lib/common/tests/utils/Makefile \ lib/common/tests/xml/Makefile \ lib/common/tests/xpath/Makefile \ lib/fencing/Makefile \ lib/gnu/Makefile \ lib/libpacemaker.pc \ lib/lrmd/Makefile \ lib/pacemaker/Makefile \ lib/pacemaker.pc \ lib/pacemaker-cib.pc \ lib/pacemaker-cluster.pc \ lib/pacemaker-fencing.pc \ lib/pacemaker-lrmd.pc \ lib/pacemaker-service.pc \ lib/pacemaker-pe_rules.pc \ lib/pacemaker-pe_status.pc \ lib/pengine/Makefile \ lib/pengine/tests/Makefile \ lib/pengine/tests/native/Makefile \ lib/pengine/tests/rules/Makefile \ lib/pengine/tests/status/Makefile \ lib/pengine/tests/unpack/Makefile \ lib/pengine/tests/utils/Makefile \ lib/services/Makefile \ maint/Makefile \ po/Makefile.in \ python/Makefile \ python/setup.py \ python/pacemaker/Makefile \ python/pacemaker/_cts/Makefile \ python/pacemaker/buildoptions.py \ python/tests/Makefile \ replace/Makefile \ rpm/Makefile \ tests/Makefile \ tools/Makefile \ tools/crm_mon.service \ tools/crm_mon.upstart \ tools/report.collector \ tools/report.common \ xml/Makefile \ xml/pacemaker-schemas.pc \ ) dnl Now process the entire list of files added by previous dnl calls to AC_CONFIG_FILES() AC_OUTPUT() dnl ***************** dnl Configure summary dnl ***************** AC_MSG_NOTICE([]) AC_MSG_NOTICE([$PACKAGE configuration:]) AC_MSG_NOTICE([ Version = ${VERSION} (Build: $BUILD_VERSION)]) AC_MSG_NOTICE([ Features = ${PCMK_FEATURES}]) AC_MSG_NOTICE([]) AC_MSG_NOTICE([ Prefix = ${prefix}]) AC_MSG_NOTICE([ Executables = ${sbindir}]) AC_MSG_NOTICE([ Man pages = ${mandir}]) AC_MSG_NOTICE([ Libraries = ${libdir}]) AC_MSG_NOTICE([ Header files = ${includedir}]) AC_MSG_NOTICE([ Arch-independent files = ${datadir}]) AC_MSG_NOTICE([ State information = ${localstatedir}]) AC_MSG_NOTICE([ System configuration = ${sysconfdir}]) AC_MSG_NOTICE([ OCF agents = ${OCF_ROOT_DIR}]) AC_MSG_NOTICE([]) AC_MSG_NOTICE([ HA group name = ${CRM_DAEMON_GROUP}]) AC_MSG_NOTICE([ HA user name = ${CRM_DAEMON_USER}]) AC_MSG_NOTICE([]) AC_MSG_NOTICE([ CFLAGS = ${CFLAGS}]) AC_MSG_NOTICE([ CFLAGS_HARDENED_EXE = ${CFLAGS_HARDENED_EXE}]) AC_MSG_NOTICE([ CFLAGS_HARDENED_LIB = ${CFLAGS_HARDENED_LIB}]) AC_MSG_NOTICE([ LDFLAGS_HARDENED_EXE = ${LDFLAGS_HARDENED_EXE}]) AC_MSG_NOTICE([ LDFLAGS_HARDENED_LIB = ${LDFLAGS_HARDENED_LIB}]) AC_MSG_NOTICE([ Libraries = ${LIBS}]) AC_MSG_NOTICE([ Stack Libraries = ${CLUSTERLIBS}]) AC_MSG_NOTICE([ Unix socket auth method = ${us_auth}]) diff --git a/tools/Makefile.am b/tools/Makefile.am index 7d3fb31f19..36bd3ae0e2 100644 --- a/tools/Makefile.am +++ b/tools/Makefile.am @@ -1,162 +1,165 @@ # -# Copyright 2004-2022 the Pacemaker project contributors +# Copyright 2004-2023 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # include $(top_srcdir)/mk/common.mk include $(top_srcdir)/mk/man.mk if BUILD_SYSTEMD systemdsystemunit_DATA = crm_mon.service endif noinst_HEADERS = crm_mon.h crm_resource.h pcmkdir = $(datadir)/$(PACKAGE) pcmk_DATA = report.common report.collector sbin_SCRIPTS = crm_report crm_standby crm_master crm_failcount if BUILD_CIBSECRETS sbin_SCRIPTS += cibsecret endif -noinst_SCRIPTS = pcmk_simtimes +noinst_SCRIPTS = cluster-clean \ + cluster-init \ + cluster-helper \ + pcmk_simtimes EXTRA_DIST = attrd_updater.8.inc \ cibadmin.8.inc \ crm_attribute.8.inc \ crm_diff.8.inc \ crm_error.8.inc \ crm_mon.8.inc \ crm_node.8.inc \ crm_resource.8.inc \ crm_rule.8.inc \ crm_shadow.8.inc \ crm_simulate.8.inc \ crm_ticket.8.inc \ crm_verify.8.inc \ crmadmin.8.inc \ fix-manpages \ iso8601.8.inc \ stonith_admin.8.inc sbin_PROGRAMS = attrd_updater \ cibadmin \ crmadmin \ crm_simulate \ crm_attribute \ crm_diff \ crm_error \ crm_mon \ crm_node \ crm_resource \ crm_rule \ crm_shadow \ crm_verify \ crm_ticket \ iso8601 \ stonith_admin ## SOURCES # A few tools are just thin wrappers around crm_attribute. # This makes their help get updated when crm_attribute changes # (see mk/common.mk). MAN8DEPS = crm_attribute crmadmin_SOURCES = crmadmin.c crmadmin_LDADD = $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la \ $(top_builddir)/lib/pacemaker/libpacemaker.la crm_error_SOURCES = crm_error.c crm_error_LDADD = $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/common/libcrmcommon.la cibadmin_SOURCES = cibadmin.c cibadmin_LDADD = $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_shadow_SOURCES = crm_shadow.c crm_shadow_LDADD = $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_node_SOURCES = crm_node.c crm_node_LDADD = $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_simulate_SOURCES = crm_simulate.c crm_simulate_LDADD = $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_diff_SOURCES = crm_diff.c crm_diff_LDADD = $(top_builddir)/lib/common/libcrmcommon.la crm_mon_SOURCES = crm_mon.c crm_mon_curses.c crm_mon_LDADD = $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/fencing/libstonithd.la \ $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la \ $(CURSESLIBS) crm_verify_SOURCES = crm_verify.c crm_verify_LDADD = $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_attribute_SOURCES = crm_attribute.c crm_attribute_LDADD = $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_resource_SOURCES = crm_resource.c \ crm_resource_ban.c \ crm_resource_print.c \ crm_resource_runtime.c crm_resource_LDADD = $(top_builddir)/lib/pengine/libpe_rules.la \ $(top_builddir)/lib/fencing/libstonithd.la \ $(top_builddir)/lib/lrmd/liblrmd.la \ $(top_builddir)/lib/services/libcrmservice.la \ $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_rule_SOURCES = crm_rule.c crm_rule_LDADD = $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/pengine/libpe_rules.la \ $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/common/libcrmcommon.la iso8601_SOURCES = iso8601.c iso8601_LDADD = $(top_builddir)/lib/common/libcrmcommon.la attrd_updater_SOURCES = attrd_updater.c attrd_updater_LDADD = $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/common/libcrmcommon.la crm_ticket_SOURCES = crm_ticket.c crm_ticket_LDADD = $(top_builddir)/lib/pengine/libpe_rules.la \ $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/common/libcrmcommon.la stonith_admin_SOURCES = stonith_admin.c stonith_admin_LDADD = $(top_builddir)/lib/pacemaker/libpacemaker.la \ $(top_builddir)/lib/cib/libcib.la \ $(top_builddir)/lib/pengine/libpe_status.la \ $(top_builddir)/lib/fencing/libstonithd.la \ $(top_builddir)/lib/common/libcrmcommon.la CLEANFILES = $(man8_MANS) diff --git a/extra/cluster-clean b/tools/cluster-clean.in similarity index 94% rename from extra/cluster-clean rename to tools/cluster-clean.in index 986d800938..4b75edf279 100755 --- a/extra/cluster-clean +++ b/tools/cluster-clean.in @@ -1,99 +1,99 @@ -#!/bin/bash +#!@BASH_PATH@ # -# Copyright 2011-2018 the Pacemaker project contributors +# Copyright 2011-2023 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # hosts= group= kill=0 while true; do case "$1" in -x) set -x; shift;; -w) for h in $2; do hosts="$hosts -w $h"; done shift; shift;; -g) group=$2; shift; shift;; --kill) kill=1; shift;; --kill-only) kill=2; shift;; "") break;; *) echo "unknown option: $1"; exit 1;; esac done if [ x"$group" = x -a x"$hosts" = x ]; then group=$CTS_GROUP fi if [ x"$hosts" != x ]; then echo `date` ": Cleaning up hosts:" target=$hosts elif [ x"$group" != x ]; then echo `date` ": Cleaning up group: $group" target="-g $group" else echo "You didn't specify any nodes to clean up" exit 1 fi cluster-helper --list bullet $target if [ $kill != 0 ]; then echo "Cleaning processes" # Bah. Force systemd to actually look at the process and realize it's dead cluster-helper $target -- "service corosync stop" &> /dev/null & cluster-helper $target -- "service pacemaker stop" &> /dev/null & cluster-helper $target -- "killall -q -9 corosync pacemakerd pacemaker-attrd pacemaker-based pacemaker-controld pacemaker-execd pacemaker-fenced pacemaker-remoted pacemaker-schedulerd dlm_controld gfs_controld" &> /dev/null cluster-helper $target -- 'kill -9 `pidof valgrind`' &> /dev/null if [ $kill == 2 ]; then exit 0 fi fi #logrotate -f $cluster_rotate echo "Cleaning files" log_files="" log_files="$log_files 'messages*'" log_files="$log_files 'localmessages*'" log_files="$log_files 'cluster*.log'" log_files="$log_files 'corosync.log*'" log_files="$log_files 'pacemaker.log*'" log_files="$log_files '*.journal'" log_files="$log_files '*.journal~'" log_files="$log_files 'secure-*'" state_files="" state_files="$state_files 'cib.xml*'" state_files="$state_files 'valgrind-*'" state_files="$state_files 'cib-*'" state_files="$state_files 'core.*'" state_files="$state_files 'cts.*'" state_files="$state_files 'pe*.bz2'" state_files="$state_files 'fdata-*'" for f in $log_files; do cluster-helper $target -- "find /var/log -name '$f' -exec rm -f \{\} \;" done for f in $state_files; do cluster-helper $target -- "find /var/lib -name '$f' -exec rm -f \{\} \;" done cluster-helper $target -- "find /dev/shm -name 'qb-*' -exec rm -f \{\} \;" -cluster-helper $target -- "find /var/lib/pacemaker/blackbox -name '*-*' -exec rm -f \{\} \;" +cluster-helper $target -- "find @CRM_BLACKBOX_DIR@ -name '*-*' -exec rm -f \{\} \;" cluster-helper $target -- "find /tmp -name '*.valgrind' -exec rm -f \{\} \;" cluster-helper $target -- 'service rsyslog restart' > /dev/null 2>&1 cluster-helper $target -- 'systemctl restart systemd-journald.socket' > /dev/null 2>&1 cluster-helper $target -- logger -i -p daemon.info __clean_logs__ #touch $cluster_log echo `date` ": Clean complete" diff --git a/extra/cluster-helper b/tools/cluster-helper.in similarity index 94% rename from extra/cluster-helper rename to tools/cluster-helper.in index 930c143f91..d8dac6ec9a 100755 --- a/extra/cluster-helper +++ b/tools/cluster-helper.in @@ -1,193 +1,201 @@ -#!/bin/bash +#!@BASH_PATH@ +# +# Copyright 2011-2023 the Pacemaker project contributors +# +# The version control history for this file may have further details. +# +# This source code is licensed under the GNU General Public License version 2 +# or later (GPLv2+) WITHOUT ANY WARRANTY. +# hosts= group=$cluster_name user=root pdsh=`which pdsh 2>/dev/null` ssh=`which qarsh 2>/dev/null` scp=`which qacp 2>/dev/null` command=list format=oneline replace="{}" if [ x$ssh = "x" ]; then ssh=ssh scp=scp fi function helptext() { echo "cluster-helper - A tool for running commands on multiple hosts" echo "" echo "Attempt to use pdsh, qarsh, or ssh (in that order) to execute commands" echo "on multiple hosts" echo "" echo "DSH groups can be configured and specified with -g instead of listing" echo "the individual hosts every time" echo "" echo "Usage: cluster-helper [options] [command]" echo "" echo "Options:" echo "--ssh Force the use of ssh instead of qarsh even if it available" echo "-g, --group Specify the group to operate on/with" echo "-w, --host Specify a host to operate on/with. May be specified multiple times" echo "-f, --format Specifiy the output format When listing hosts or group contents" echo " Allowed values: [oneline], long, short, pdsh, bullet" echo "" echo "" echo "Commands:" echo "--list format List the contents of a group in the specified format" echo "--add name Add supplied (-w) hosts to the named group" echo "--create name Create the named group with the supplied (-w) hosts" echo "--run, -- Treat all subsequent arguments as a command to perform on" echo " the specified command on the hosts or group" echo "--xargs Run the supplied command having replaced any occurrences" echo " of {} with the node name" echo "" echo "--copy file(s) host:file Pass subsequent arguments to scp or qacp" echo " Any occurrences of {} are replaced with the node name" echo "--key Install an ssh key" echo "" exit $1 } while true ; do case "$1" in --help|-h|-\?) helptext 0;; -x) set -x; shift;; --ssh) ssh="ssh"; scp="scp"; pdsh=""; shift;; -g|--group) group="$2"; shift; shift;; -w|--host) for h in $2; do hosts="$hosts $h"; done shift; shift;; -f|--format) format=$2; shift; shift;; -I) replace=$2; shift; shift;; --list|list) format=$2; command=list; shift; shift;; --add|add) command=group-add; shift;; --create|create) group="$2", command=group-create; shift; shift;; --run|run) command=run; shift;; --copy|copy) command=copy; shift; break ;; --key|key) command=key; shift; break ;; --xargs) command=xargs; shift; break ;; --) command=run; shift; break ;; "") break;; *) helptext 1;; esac done if [ x"$group" = x -a x"$hosts" = x ]; then group=$CTS_GROUP fi function expand() { fmt=$1 if [ x$group != x -a -f ~/.dsh/group/$group ]; then hosts=`cat ~/.dsh/group/$group` elif [ x$group != x ]; then echo "Unknown group: $group" >&2 exit 1 fi if [ "x$hosts" != x -a $fmt = oneline ]; then echo $hosts elif [ "x$hosts" != x -a $fmt = short ]; then ( for h in $hosts; do echo $h | sed 's:\..*::' done ) | tr '\n' ' ' echo "" elif [ "x$hosts" != x -a $fmt = pdsh ]; then ( for h in $hosts; do echo "-w $h" done ) | tr '\n' ' ' echo "" elif [ "x$hosts" != x -a $fmt = long ]; then for h in $hosts; do echo $h done elif [ "x$hosts" != x -a $fmt = bullet ]; then for h in $hosts; do echo " * $h" done elif [ "x$hosts" != x ]; then echo "Unknown format: $fmt" >&2 fi } if [ $command = list ]; then expand $format elif [ $command = key ]; then hosts=`expand oneline` for h in $hosts; do ssh-copy-id root@$h done elif [ $command = group-create ]; then f=`mktemp` mkdir -p ~/.dsh/group if [ -f ~/.dsh/group/$group ]; then echo "Overwriting existing group $group" fi for h in $hosts; do echo $h >> $f done echo "Creating group $group in ~/.dsh/group" sort -u $f > ~/.dsh/group/$group rm -f $f elif [ $command = group-add ]; then if [ x$group = x ]; then echo "Please specify a group to append to" exit 1 fi f=`mktemp` mkdir -p ~/.dsh/group if [ -f ~/.dsh/group/$group ]; then cat ~/.dsh/group/$group > $f fi for h in $hosts; do echo $h >> $f done echo "Appending hosts to group $group in ~/.dsh/group" sort -u $f > ~/.dsh/group/$group rm -f $f elif [ $command = run ]; then if [ x$pdsh != x ]; then hosts=`expand pdsh` $pdsh -l $user $hosts -- $* else hosts=`expand oneline` for n in $hosts; do $ssh -l $user $n -- $* < /dev/null done if [ x"$hosts" = x ]; then echo "No hosts specified" fi fi elif [ $command = copy ]; then hosts=`expand oneline` for n in $hosts; do $scp `echo $* | sed 's@'$replace'@'$n'@'` done elif [ $command = xargs ]; then hosts=`expand oneline` for n in $hosts; do eval `echo $* | sed 's@'$replace'@'$n'@'` done fi diff --git a/extra/cluster-init b/tools/cluster-init.in similarity index 85% rename from extra/cluster-init rename to tools/cluster-init.in index aca74890f1..1485c81f8e 100755 --- a/extra/cluster-init +++ b/tools/cluster-init.in @@ -1,599 +1,537 @@ -#!/bin/bash +#!@BASH_PATH@ # -# Copyright 2011-2021 the Pacemaker project contributors +# Copyright 2011-2023 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # accept_defaults=0 do_raw=0 ETCHOSTS=0 -pcmk_ver=11 nodelist=0 limit=0 pkgs="corosync xinetd nmap abrt-cli fence-agents perl-TimeDate gdb" transport="multicast" inaddr_any="no" INSTALL= cs_conf= fence_conf= -rpm_repo= -distro= dsh_group=0 if [ ! -z $cluster_name ]; then cluster=$cluster_name else cluster=dummy0 fi # Corosync Settings cs_port=666 # Settings that work great on nXX join=60 #token=3000 consensus=1500 # Official settings join=2000 token=5000 consensus=2500 # Testing join=1000 consensus=7500 do_debug=off function ip_for_node() { ping -c 1 $1 | grep "bytes from" | head -n 1 | sed -e 's/.*bytes from//' -e 's/: icmp.*//' | awk '{print $NF}' | sed 's:(::' | sed 's:)::' # if [ $do_raw = 1 ]; then # echo $1 # else # #host $1 | grep "has address" | head -n 1 | awk '{print $NF}' | sed 's:(::' | sed 's:)::' # fi } function id_for_node() { ip_for_node $* | tr '.' ' ' | awk '{print $4}' } function name_for_node() { echo $1 | awk -F. '{print $1}' } function helptext() { echo "cluster-init - Configure cluster communication for the infrastructures supported by Pacemaker" echo "" echo "-g, --group Specify the group to operate on/with" echo "-w, --host Specify a host to operate on/with. May be specified multiple times" echo "-r, --raw-ip Supplied nodes were listed as their IP addresses" echo "" echo "-c, --corosync configure for corosync" echo "-C, --nodelist configure for corosync with a node list" echo "-u, --unicast configure point-to-point communication instead of multicast" echo "" echo "-I, --install Install packages" - echo "-R, --repo name Setup and update/install Pacemaker from the named clusterlabs.org repo" - echo " Known values: rpm, rpm-test, rpm-next, rpm-test-next, rpm-test-rhel" - echo "-D, --distro The distro within the --repo. Defaults to fedora-15" echo "" echo "-d, --debug Enable debug logging for the cluster" - echo "-10 install stable-1.0 packages, implies: -p 0 -R rpm-test -I" echo "--hosts Copy the local /etc/hosts file to all nodes" echo "-e, --extra list Whitespace separated list of extra packages to install" echo "-l, --limit N Use the first N hosts from the named group" echo " Extra packages to install" exit $1 } host_input="" while true; do case "$1" in -g) cluster=$2; shift; shift;; -w|--host) for h in $2; do host_input="$host_input -w $h"; done shift; shift;; -w) host_input="$host_input -w $2" shift; shift;; -r|--raw-ip) do_raw=1; shift;; - -D) distro=$2; shift; shift;; -d|--debug) do_debug=on; shift;; - -R|--repo) rpm_repo=$2; shift; shift;; -I|--install) INSTALL=Yes; shift;; --hosts) ETCHOSTS=1; shift;; -c|--corosync) CTYPE=corosync; shift;; -C|--nodelist) CTYPE=corosync; nodelist=1; shift;; -u|--unicast) nodelist=1; transport=udpu; inaddr_any="yes"; shift;; -e|--extra) pkgs="$pkgs $2"; shift; shift;; - -t|--test) rpm_repo=rpm-test-next; pkgs="$pkgs valgrind"; shift;; + -t|--test) pkgs="$pkgs valgrind"; shift;; -l|--limit) limit=$2; shift; shift;; r*[0-9]) rhel=`echo $1 | sed -e s/rhel// -e s/-// -e s/r//` - distro="rhel-$rhel"; pkgs="$pkgs qarsh-server"; case $rhel in 7) CTYPE=corosync;; esac shift ;; f*[0-9][0-9]) - distro="fedora-`echo $1 | sed -e s/fedora// -e s/-// -e s/f//`"; CTYPE=corosync; shift ;; - p0|10) pcmk_ver=10; rpm_repo="rpm-test"; install=1; shift;; -y|--yes|--defaults) accept_defaults=1; shift;; -x) set -x; shift;; -\?|--help) helptext 0; shift;; "") break;; *) echo "unknown option: $1"; exit 1;; esac done if [ ! -z $cluster ]; then host_input="-g $cluster" # use the last digit present in the variable (if any) dsh_group=`echo $cluster | sed 's/[^0-9][^0-9]*//g;s/.*\([0-9]\)$/\1/'` fi if [ -z $dsh_group ]; then dsh_group=1 fi if [ x = "x$host_input" -a x = "x$cluster" ]; then if [ -d $HOME/.dsh/group ]; then read -p "Please specify a dsh group you'd like to configure as a cluster? [] " -t 60 cluster else read -p "Please specify a whitespace delimetered list of nodes you'd like to configure as a cluster? [] " -t 60 host_list for h in $2; do host_input="$host_input -w $h"; done fi fi if [ -z "$host_input" ]; then echo "You didn't specify any nodes or groups to configure" exit 1 fi if [ $limit -gt 0 ]; then echo "Using only the first $limit hosts in $cluster group" host_list=`cluster-helper --list bullet $host_input | head -n $limit | tr '\n*' ' '` else host_list=`cluster-helper --list short $host_input` fi num_hosts=`echo $host_list | wc -w` if [ $num_hosts -gt 9 ]; then cs_port=66 fi for h in $host_list; do ping -c 1 -q $h if [ $? != 0 ]; then echo "Using long names..." host_list=`cluster-helper --list long $host_input` break fi done if [ -z $CTYPE ]; then echo "" read -p "Where should Pacemaker obtain membership and quorum from? [corosync] (corosync) " -t 60 CTYPE fi case $CTYPE in - corosync) cs_conf=/etc/corosync/corosync.conf;; + corosync) cs_conf="@PCMK__COROSYNC_CONF@" ;; esac function get_defaults() { if [ -z $SSH ]; then SSH="No" fi if [ -z $SELINUX ]; then SELINUX="No" fi if [ -z $IPTABLES ]; then IPTABLES="Yes" fi if [ -z $DOMAIN ]; then DOMAIN="No" fi if [ -z $INSTALL ]; then INSTALL="Yes" fi if [ -z $DATE ]; then DATE="No" fi } get_defaults if [ $accept_defaults = 0 ]; then echo "" read -p "Shall I install an ssh key to cluster nodes? [$SSH] " -t 60 SSH echo "" echo "SELinux prevent many things, including password-less ssh logins" read -p "Shall I disable selinux? [$SELINUX] " -t 60 SELINUX echo "" echo "Incorrectly configured firewalls will prevent corosync from starting up" read -p "Shall I disable iptables? [$IPTABLES] " -t 60 IPTABLES - if [ $pcmk_ver = 10 ]; then - echo "" - echo "Without a default domain, external/ssh fencing probably won't work because it can't find its peers" - read -p "Shall I set one? [No] (domain.name) " -t 60 DOMAIN - fi echo "" read -p "Shall I install/update the relevant packages? [$INSTALL] " -t 60 INSTALL - case $INSTALL in - [Yy][Ee][Ss]|[Yy]|"") - if [ -z $rpm_repo ]; then - echo "" - read -p "Would you like to install packages from ClusterLabs.org? [No] (rpm, rpm-next, rpm-test-next) " -t 60 rpm_repo - fi - - if [ ! -z $rpm_repo ]; then - if [ -z $distro ]; then - distro=fedora-18 - echo "" - read -p "Which distro are you installing for? [$distro] (eg. fedora-17, rhel-6) " -t 60 distro - fi - fi - ;; - esac - echo "" read -p "Shall I sync the date/time? [$DATE] " -t 60 DATE fi get_defaults echo "" echo "Detecting possible fencing options" if [ -e /etc/cluster/fence_xvm.key ]; then echo "* Found fence_xvm" fence_conf=/etc/cluster/fence_xvm.key pkgs="$pkgs fence-virt" fi if [ ! -z ${OS_AUTH_URL} ]; then echo "* Found openstack credentials" fence_conf=/sbin/fence_openstack pkgs="$pkgs python-novaclient" fi echo "" echo "Beginning cluster configuration" echo "" case $SSH in [Yy][Ee][Ss]|[Yy]) for host in $host_list; do echo "Installing our ssh key on ${host}" ssh-copy-id root@${host} >/dev/null 2>&1 # Fix selinux labeling ssh -l root ${host} -- restorecon -R -v . done ;; esac case $DATE in [Yy][Ee][Ss]|[Yy]) for host in $host_list; do echo "Setting time on ${host}" scp /etc/localtime root@${host}:/etc now=`date +%s` ssh -l root ${host} -- date -s @$now echo "" done ;; esac -REPO= -if [ ! -z $rpm_repo ]; then - REPO=$rpm_repo/$distro -fi - init=`mktemp` cat<<-END>$init verbose=0 pkgs="$pkgs" lhost=\`uname -n\` lshort=\`echo \$lhost | awk -F. '{print \$1}'\` log() { printf "%-10s \$*\n" "\$lshort:" 1>&2 } debug() { if [ \$verbose -gt 0 ]; then log "Debug: \$*" fi } info() { log "\$*" } warning() { log "WARN: \$*" } fatal() { log "ERROR: \$*" exit 1 } case $SELINUX in [Yy][Ee][Ss]|[Yy]) sed -i.sed "s/enforcing/disabled/g" /etc/selinux/config ;; esac case $IPTABLES in [Yy][Ee][Ss]|[Yy]|"") service iptables stop chkconfig iptables off service firewalld stop chkconfig firewalld off ;; esac case $DOMAIN in [Nn][Oo]|"") ;; *.*) if ! grep domain /etc/resolv.conf then sed -i.sed "s/nameserver/domain\ $DOMAIN\\\nnameserver/g" /etc/resolv.conf fi ;; *) echo "Unknown domain: $DOMAIN";; esac case $INSTALL in [Yy][Ee][Ss]|[Yy]|"") - - if [ ! -z $REPO ]; then - info Configuring Clusterlabs repo: $REPO - yum install -y wget - rm -f /etc/yum.repos.d/clusterlabs.repo - wget -O /etc/yum.repos.d/clusterlabs.repo https://www.clusterlabs.org/$REPO/clusterlabs.repo &>/dev/null - yum clean all - fi - info Installing cluster software - if [ $pcmk_ver = 10 ]; then - yum install -y $pkgs at - service atd start - systemctl enable atd.service - - yum install -y "pacemaker < 1.1" - else - yum install -y $pkgs pacemaker - fi + yum install -y $pkgs pacemaker ;; esac info "Configuring services" chkconfig xinetd on service xinetd start &>/dev/null chkconfig corosync off &> /dev/null mkdir -p /etc/cluster info "Turning on core files" grep -q "unlimited" /etc/bashrc if [ $? = 1 ]; then sed -i.sed "s/bashrc/bashrc\\\nulimit\ -c\ unlimited/g" /etc/bashrc fi function patch_cs_config() { test $num_hosts != 2 two_node=$? priority="info" if [ $do_debug = 1 ]; then priority="debug" fi ssh -l root ${host} -- sed -i.sed "s/.*mcastaddr:.*/mcastaddr:\ 226.94.1.1/g" $cs_conf ssh -l root ${host} -- sed -i.sed "s/.*mcastport:.*/mcastport:\ $cs_port$dsh_group/g" $cs_conf ssh -l root ${host} -- sed -i.sed "s/.*bindnetaddr:.*/bindnetaddr:\ $ip/g" $cs_conf ssh -l root ${host} -- sed -i.sed "s/.*syslog_facility:.*/syslog_facility:\ daemon/g" $cs_conf ssh -l root ${host} -- sed -i.sed "s/.*logfile_priority:.*/logfile_priority:\ $priority/g" $cs_conf if [ ! -z $token ]; then ssh -l root ${host} -- sed -i.sed "s/.*token:.*/token:\ $token/g" $cs_conf fi if [ ! -z $consensus ]; then ssh -l root ${host} -- sed -i.sed "s/.*consensus:.*/consensus:\ $consensus/g" $cs_conf fi if [ ! -z $join ]; then ssh -l root ${host} -- sed -i.sed "s/^join:.*/join:\ $join/g" $cs_conf ssh -l root ${host} -- sed -i.sed "s/\\\Wjoin:.*/join:\ $join/g" $cs_conf fi ssh -l root ${host} -- grep -q "corosync_votequorum" $cs_conf 2>&1 > /dev/null if [ $? -eq 0 ]; then ssh -l root ${host} -- sed -i.sed "s/\\\Wexpected_votes:.*/expected_votes:\ $num_hosts/g" $cs_conf ssh -l root ${host} -- sed -i.sed "s/\\\Wtwo_node:.*/two_node:\ $two_node/g" $cs_conf else printf "%-10s Wrong quorum provider: installing $cs_conf for corosync instead\n" ${host} create_cs_config fi } function create_cs_config() { cs_tmp=/tmp/cs_conf.$$ test $num_hosts != 2 two_node=$? # Base config priority="info" if [ $do_debug = 1 ]; then priority="debug" fi cat <<-END >$cs_tmp # Please read the corosync.conf.5 manual page totem { version: 2 # cypto_cipher and crypto_hash: Used for mutual node authentication. # If you choose to enable this, then do remember to create a shared # secret with "corosync-keygen". crypto_cipher: none crypto_hash: none # Assign a fixed node id nodeid: $id # Disable encryption secauth: off transport: $transport inaddr_any: $inaddr_any # interface: define at least one interface to communicate # over. If you define more than one interface stanza, you must # also set rrp_mode. interface { # Rings must be consecutively numbered, starting at 0. ringnumber: 0 # This is normally the *network* address of the # interface to bind to. This ensures that you can use # identical instances of this configuration file # across all your cluster nodes, without having to # modify this option. bindnetaddr: $ip # However, if you have multiple physical network # interfaces configured for the same subnet, then the # network address alone is not sufficient to identify # the interface Corosync should bind to. In that case, # configure the *host* address of the interface # instead: # bindnetaddr: 192.168.1.1 # When selecting a multicast address, consider RFC # 2365 (which, among other things, specifies that # 239.255.x.x addresses are left to the discretion of # the network administrator). Do not reuse multicast # addresses across multiple Corosync clusters sharing # the same network. # Corosync uses the port you specify here for UDP # messaging, and also the immediately preceding # port. Thus if you set this to 5405, Corosync sends # messages over UDP ports 5405 and 5404. mcastport: $cs_port$dsh_group # Time-to-live for cluster communication packets. The # number of hops (routers) that this ring will allow # itself to pass. Note that multicast routing must be # specifically enabled on most network routers. ttl: 1 mcastaddr: 226.94.1.1 } } logging { debug: off fileline: off to_syslog: yes to_stderr: no syslog_facility: daemon timestamp: on to_logfile: yes logfile: /var/log/corosync.log logfile_priority: $priority } amf { mode: disabled } quorum { provider: corosync_votequorum expected_votes: $num_hosts votes: 1 two_node: $two_node wait_for_all: 0 last_man_standing: 0 auto_tie_breaker: 0 } END scp -q $cs_tmp root@${host}:$cs_conf rm -f $cs_tmp } for host in $host_list; do echo "" echo "" echo "* Configuring $host" cs_short_host=`name_for_node $host` ip=`ip_for_node $host` id=`id_for_node $host` echo $ip | grep -qis NXDOMAIN if [ $? = 0 ]; then echo "Couldn't find resolve $host to an IP address" exit 1 fi if [ `uname -n` = $host ]; then bash $init else cat $init | ssh -l root -T $host -- "cat > $init; bash $init" fi if [ "x$fence_conf" != x ]; then if [ -e $fence_conf ]; then scp $fence_conf root@${host}:$fence_conf fi fi if [ $ETCHOSTS = 1 ]; then scp /etc/hosts root@${host}:/etc/hosts fi - if [ $pcmk_ver = 10 ]; then - scp /etc/hosts root@${host}:/etc/hosts - scp ~/.ssh/id_dsa.suse root@${host}:.ssh/id_dsa - scp ~/.ssh/known_hosts root@${host}:.ssh/known_hosts - fi - ssh -l root ${host} -- grep -q "token:" $cs_conf 2>&1 > /dev/null new_config=$? new_config=1 if [ $new_config = 0 ]; then printf "%-10s Updating $cs_conf\n" ${host}: patch_cs_config else printf "%-10s Installing $cs_conf\n" ${host}: create_cs_config fi done