diff --git a/doc/sphinx/Pacemaker_Explained/local-options.rst b/doc/sphinx/Pacemaker_Explained/local-options.rst index 91eda6632d..03abc42ad6 100644 --- a/doc/sphinx/Pacemaker_Explained/local-options.rst +++ b/doc/sphinx/Pacemaker_Explained/local-options.rst @@ -1,515 +1,518 @@ Host-Local Configuration ------------------------ .. index:: pair: XML element; configuration .. note:: Directory and file paths below may differ on your system depending on your Pacemaker build settings. Check your Pacemaker configuration file to find the correct paths. Pacemaker supports several host-local configuration options. These options can be configured on each node in the main Pacemaker configuration file (|PCMK_CONFIG_FILE|) in the format ``=""``. They work by setting environment variables when Pacemaker daemons start up. .. list-table:: **Local Options** :class: longtable :widths: 2 2 2 5 :header-rows: 1 * - Name - Type - Default - Description * - .. _pcmk_logfacility: .. index:: pair: node option; PCMK_logfacility PCMK_logfacility - :ref:`enumeration ` - daemon - Enable logging via the system log or journal, using the specified log facility. Messages sent here are of value to all Pacemaker administrators. This can be disabled using ``none``, but that is not recommended. Allowed values: * ``none`` * ``daemon`` * ``user`` * ``local0`` * ``local1`` * ``local2`` * ``local3`` * ``local4`` * ``local5`` * ``local6`` * ``local7`` * - .. _pcmk_logpriority: .. index:: pair:: node option; PCMK_logpriority PCMK_logpriority - :ref:`enumeration ` - notice - Unless system logging is disabled using ``PCMK_logfacility=none``, messages of the specified log severity and higher will be sent to the system log. The default is appropriate for most installations. Allowed values: * ``emerg`` * ``alert`` * ``crit`` * ``error`` * ``warning`` * ``notice`` * ``info`` * ``debug`` * - .. _pcmk_logfile: .. index:: pair:: node option; PCMK_logfile PCMK_logfile - :ref:`text ` - |PCMK_LOG_FILE| - Unless set to ``none``, more detailed log messages will be sent to the specified file (in addition to the system log, if enabled). These messages may have extended information, and will include messages of info severity. This log is of more use to developers and advanced system - administrators, and when reporting problems. + administrators, and when reporting problems. Note: The default is + |PCMK_CONTAINER_LOG_FILE| (inside the container) for bundled container + nodes; this would typically be mapped to a different path on the host + running the container. * - .. _pcmk_logfile_mode: .. index:: pair:: node option; PCMK_logfile_mode PCMK_logfile_mode - :ref:`text ` - 0660 - Pacemaker will set the permissions on the detail log to this value (see ``chmod(1)``). * - .. _pcmk_debug: .. index:: pair:: node option; PCMK_debug PCMK_debug - :ref:`enumeration ` - no - Whether to send debug severity messages to the detail log. This may be set for all subsystems (``yes`` or ``no``) or for specific (comma- separated) subsystems. Allowed subsystems are: * ``pacemakerd`` * ``pacemaker-attrd`` * ``pacemaker-based`` * ``pacemaker-controld`` * ``pacemaker-execd`` * ``pacemaker-fenced`` * ``pacemaker-schedulerd`` Example: ``PCMK_debug="pacemakerd,pacemaker-execd"`` * - .. _pcmk_stderr: .. index:: pair:: node option; PCMK_stderr PCMK_stderr - :ref:`boolean ` - no - *Advanced Use Only:* Whether to send daemon log messages to stderr. This would be useful only during troubleshooting, when starting Pacemaker manually on the command line. Setting this option in the configuration file is pointless, since the file is not read when starting Pacemaker manually. However, it can be set directly as an environment variable on the command line. * - .. _pcmk_trace_functions: .. index:: pair:: node option; PCMK_trace_functions PCMK_trace_functions - :ref:`text ` - - *Advanced Use Only:* Send debug and trace severity messages from these (comma-separated) source code functions to the detail log. Example: ``PCMK_trace_functions="func1,func2"`` * - .. _pcmk_trace_files: .. index:: pair:: node option; PCMK_trace_files PCMK_trace_files - :ref:`text ` - - *Advanced Use Only:* Send debug and trace severity messages from all functions in these (comma-separated) source file names to the detail log. Example: ``PCMK_trace_files="file1.c,file2.c"`` * - .. _pcmk_trace_formats: .. index:: pair:: node option; PCMK_trace_formats PCMK_trace_formats - :ref:`text ` - - *Advanced Use Only:* Send trace severity messages that are generated by these (comma-separated) format strings in the source code to the detail log. Example: ``PCMK_trace_formats="Error: %s (%d)"`` * - .. _pcmk_trace_tags: .. index:: pair:: node option; PCMK_trace_tags PCMK_trace_tags - :ref:`text ` - - *Advanced Use Only:* Send debug and trace severity messages related to these (comma-separated) resource IDs to the detail log. Example: ``PCMK_trace_tags="client-ip,dbfs"`` * - .. _pcmk_blackbox: .. index:: pair:: node option; PCMK_blackbox PCMK_blackbox - :ref:`enumeration ` - no - *Advanced Use Only:* Enable blackbox logging globally (``yes`` or ``no``) or by subsystem. A blackbox contains a rolling buffer of all logs (of all severities). Blackboxes are stored under |CRM_BLACKBOX_DIR| by default, by default, and their contents can be viewed using the ``qb-blackbox(8)`` command. The blackbox recorder can be enabled at start using this variable, or at runtime by sending a Pacemaker subsystem daemon process a ``SIGUSR1`` or ``SIGTRAP`` signal, and disabled by sending ``SIGUSR2`` (see ``kill(1)``). The blackbox will be written after a crash, assertion failure, or ``SIGTRAP`` signal. See :ref:`PCMK_debug ` for allowed subsystems. Example: ``PCMK_blackbox="pacemakerd,pacemaker-execd"`` * - .. _pcmk_trace_blackbox: .. index:: pair:: node option; PCMK_trace_blackbox PCMK_trace_blackbox - :ref:`enumeration ` - - *Advanced Use Only:* Write a blackbox whenever the message at the specified function and line is logged. Multiple entries may be comma- separated. Example: ``PCMK_trace_blackbox="remote.c:144,remote.c:149"`` * - .. _pcmk_node_start_state: .. index:: pair:: node option; PCMK_node_start_state PCMK_node_start_state - :ref:`enumeration ` - default - By default, the local host will join the cluster in an online or standby state when Pacemaker first starts depending on whether it was previously put into standby mode. If this variable is set to ``standby`` or ``online``, it will force the local host to join in the specified state. * - .. _pcmk_node_action_limit: .. index:: pair:: node option; PCMK_node_action_limit PCMK_node_action_limit - :ref:`nonnegative integer ` - - Specify the maximum number of jobs that can be scheduled on this node. If set, this overrides the ``node-action-limit`` cluster property for this node. * - .. _pcmk_shutdown_delay: .. index:: pair:: node option; PCMK_shutdown_delay PCMK_shutdown_delay - :ref:`timeout ` - - Specify a delay before shutting down ``pacemakerd`` after shutting down all other Pacemaker daemons. * - .. _pcmk_fail_fast: .. index:: pair:: node option; PCMK_fail_fast PCMK_fail_fast - :ref:`boolean ` - no - By default, if a Pacemaker subsystem crashes, the main ``pacemakerd`` process will attempt to restart it. If this variable is set to ``yes``, ``pacemakerd`` will panic the local host instead. * - .. _pcmk_panic_action: .. index:: pair:: node option; PCMK_panic_action PCMK_panic_action - :ref:`enumeration ` - reboot - Pacemaker will panic the local host under certain conditions. By default, this means rebooting the host. This variable can change that behavior: if ``crash``, trigger a kernel crash (useful if you want a kernel dump to investigate); if ``sync-reboot`` or ``sync-crash``, synchronize filesystems before rebooting the host or triggering a kernel crash. The sync values are more likely to preserve log messages, but with the risk that the host may be left active if the synchronization hangs. * - .. _pcmk_authkey_location: .. index:: pair:: node option; PCMK_authkey_location PCMK_authkey_location - :ref:`text ` - |PCMK_AUTHKEY_FILE| - Use the contents of this file as the authorization key to use with Pacemaker Remote connections. This file must be readable by Pacemaker daemons (that is, it must allow read permissions to either the |CRM_DAEMON_USER| user or the |CRM_DAEMON_GROUP| group), and its contents must be identical on all nodes. * - .. _pcmk_remote_address: .. index:: pair:: node option; PCMK_remote_address PCMK_remote_address - :ref:`text ` - - By default, if the Pacemaker Remote service is run on the local node, it will listen for connections on all IP addresses. This may be set to one address to listen on instead, as a resolvable hostname or as a numeric IPv4 or IPv6 address. When resolving names or listening on all addresses, IPv6 will be preferred if available. When listening on an IPv6 address, IPv4 clients will be supported via IPv4-mapped IPv6 addresses. Example: ``PCMK_remote_address="192.0.2.1"`` * - .. _pcmk_remote_port: .. index:: pair:: node option; PCMK_remote_port PCMK_remote_port - :ref:`port ` - 3121 - Use this TCP port number for Pacemaker Remote node connections. This value must be the same on all nodes. * - .. _pcmk_remote_pid1: .. index:: pair:: node option; PCMK_remote_pid1 PCMK_remote_pid1 - :ref:`enumeration ` - default - *Advanced Use Only:* When a bundle resource's ``run-command`` option is left to default, Pacemaker Remote runs as PID 1 in the bundle's containers. When it does so, it loads environment variables from the container's |PCMK_INIT_ENV_FILE| and performs the PID 1 responsibility of reaping dead subprocesses. This option controls whether those actions are performed when Pacemaker Remote is not running as PID 1. It is intended primarily for developer testing but can be useful when ``run-command`` is set to a separate, custom PID 1 process that launches Pacemaker Remote. * ``full``: Pacemaker Remote loads environment variables from |PCMK_INIT_ENV_FILE| and reaps dead subprocesses. * ``vars``: Pacemaker Remote loads environment variables from |PCMK_INIT_ENV_FILE| but does not reap dead subprocesses. * ``default``: Pacemaker Remote performs neither action. If Pacemaker Remote is running as PID 1, this option is ignored, and the behavior is the same as for ``full``. * - .. _pcmk_tls_priorities: .. index:: pair:: node option; PCMK_tls_priorities PCMK_tls_priorities - :ref:`text ` - |PCMK_GNUTLS_PRIORITIES| - *Advanced Use Only:* These GnuTLS cipher priorities will be used for TLS connections (whether for Pacemaker Remote connections or remote CIB access, when enabled). See: https://gnutls.org/manual/html_node/Priority-Strings.html Pacemaker will append ``":+ANON-DH"`` for remote CIB access and ``":+DHE-PSK:+PSK"`` for Pacemaker Remote connections, as they are required for the respective functionality. Example: ``PCMK_tls_priorities="SECURE128:+SECURE192"`` * - .. _pcmk_dh_min_bits: .. index:: pair:: node option; PCMK_dh_min_bits PCMK_dh_min_bits - :ref:`nonnegative integer ` - 0 (no minimum) - *Advanced Use Only:* Set a lower bound on the bit length of the prime number generated for Diffie-Hellman parameters needed by TLS connections. The default is no minimum. The server (Pacemaker Remote daemon, or CIB manager configured to accept remote clients) will use this value to provide a floor for the value recommended by the GnuTLS library. The library will only accept a limited number of specific values, which vary by library version, so setting these is recommended only when required for compatibility with specific client versions. Clients (connecting cluster nodes or remote CIB commands) will require that the server use a prime of at least this size. This is recommended only when the value must be lowered in order for the client's GnuTLS library to accept a connection to an older server. * - .. _pcmk_dh_max_bits: .. index:: pair:: node option; PCMK_dh_max_bits PCMK_dh_max_bits - :ref:`nonnegative integer ` - 0 (no maximum) - *Advanced Use Only:* Set an upper bound on the bit length of the prime number generated for Diffie-Hellman parameters needed by TLS connections. The default is no maximum. The server (Pacemaker Remote daemon, or CIB manager configured to accept remote clients) will use this value to provide a ceiling for the value recommended by the GnuTLS library. The library will only accept a limited number of specific values, which vary by library version, so setting these is recommended only when required for compatibility with specific client versions. Clients do not use ``PCMK_dh_max_bits``. * - .. _pcmk_ipc_type: .. index:: pair:: node option; PCMK_ipc_type PCMK_ipc_type - :ref:`enumeration ` - shared-mem - *Advanced Use Only:* Force use of a particular IPC method. Allowed values: * ``shared-mem`` * ``socket`` * ``posix`` * ``sysv`` * - .. _pcmk_ipc_buffer: .. index:: pair:: node option; PCMK_ipc_buffer PCMK_ipc_buffer - :ref:`nonnegative integer ` - 131072 - *Advanced Use Only:* Specify an IPC buffer size in bytes. This can be useful when connecting to large clusters that result in messages exceeding the default size (which will also result in log messages referencing this variable). * - .. _pcmk_cluster_type: .. index:: pair:: node option; PCMK_cluster_type PCMK_cluster_type - :ref:`enumeration ` - corosync - *Advanced Use Only:* Specify the cluster layer to be used. If unset, Pacemaker will detect and use a supported cluster layer, if available. Currently, ``"corosync"`` is the only supported cluster layer. If multiple layers are supported in the future, this will allow overriding Pacemaker's automatic detection to select a specific one. * - .. _pcmk_schema_directory: .. index:: pair:: node option; PCMK_schema_directory PCMK_schema_directory - :ref:`text ` - |CRM_SCHEMA_DIRECTORY| - *Advanced Use Only:* Specify an alternate location for RNG schemas and XSL transforms. * - .. _pcmk_valgrind_enabled: .. index:: pair:: node option; PCMK_valgrind_enabled PCMK_valgrind_enabled - :ref:`enumeration ` - no - *Advanced Use Only:* Whether subsystem daemons should be run under ``valgrind``. Allowed values are the same as for ``PCMK_debug``. * - .. _pcmk_callgrind_enabled: .. index:: pair:: node option; PCMK_callgrind_enabled PCMK_callgrind_enabled - :ref:`enumeration ` - no - *Advanced Use Only:* Whether subsystem daemons should be run under ``valgrind`` with the ``callgrind`` tool enabled. Allowed values are the same as for ``PCMK_debug``. * - .. _valgrind_opts: .. index:: pair:: node option; VALGRIND_OPTS VALGRIND_OPTS - :ref:`text ` - - *Advanced Use Only:* Pass these options to valgrind, when enabled (see ``valgrind(1)``). ``"--vgdb=no"`` should usually be specified because ``pacemaker-execd`` can lower privileges when executing commands, which would otherwise leave a bunch of unremovable files in ``/tmp``. diff --git a/doc/sphinx/conf.py.in b/doc/sphinx/conf.py.in index 6c12fc0ff5..9aac5e95d0 100644 --- a/doc/sphinx/conf.py.in +++ b/doc/sphinx/conf.py.in @@ -1,329 +1,330 @@ """ Sphinx configuration for Pacemaker documentation """ __copyright__ = "Copyright 2020-2023 the Pacemaker project contributors" __license__ = "GNU General Public License version 2 or later (GPLv2+) WITHOUT ANY WARRANTY" # This file is execfile()d with the current directory set to its containing dir. # # Note that not all possible configuration values are present in this # autogenerated file. # # All configuration values have a default; values that are commented out # serve to show the default. import datetime import os import sys # Variables that can be used later in this file authors = "the Pacemaker project contributors" year = datetime.datetime.now().year doc_license = "Creative Commons Attribution-ShareAlike International Public License" doc_license += " version 4.0 or later (CC-BY-SA v4.0+)" # rST markup to insert at beginning of every document; mainly used for # # .. || replace:: # # where occurrences of || in the rST will be substituted with rst_prolog=""" .. |CFS_DISTRO| replace:: AlmaLinux .. |CFS_DISTRO_VER| replace:: 9 .. |CRM_BLACKBOX_DIR| replace:: ``%CRM_BLACKBOX_DIR%`` .. |CRM_CONFIG_DIR| replace:: ``%CRM_CONFIG_DIR%`` .. |CRM_DAEMON_GROUP| replace:: ``%CRM_DAEMON_GROUP%`` .. |CRM_DAEMON_USER| replace:: ``%CRM_DAEMON_USER%`` .. |CRM_SCHEMA_DIRECTORY| replace:: %CRM_SCHEMA_DIRECTORY% .. |PCMK_AUTHKEY_FILE| replace:: %PACEMAKER_CONFIG_DIR%/authkey .. |PCMK_CONFIG_FILE| replace:: ``%CONFIGDIR%/pacemaker`` +.. |PCMK_GNUTLS_PRIORITIES| replace:: %PCMK_GNUTLS_PRIORITIES% .. |PCMK_INIT_ENV_FILE| replace:: ``%PACEMAKER_CONFIG_DIR%/pcmk-init.env`` .. |PCMK_LOG_FILE| replace:: %CRM_LOG_DIR%/pacemaker.log -.. |PCMK_GNUTLS_PRIORITIES| replace:: %PCMK_GNUTLS_PRIORITIES% +.. |PCMK_CONTAINER_LOG_FILE| replace:: ``/var/log/pcmk-init.log`` .. |REMOTE_DISTRO| replace:: AlmaLinux .. |REMOTE_DISTRO_VER| replace:: 9 """ # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. sys.path.insert(0, os.path.abspath('%ABS_TOP_SRCDIR%/python')) # -- General configuration ----------------------------------------------------- # If your documentation needs a minimal Sphinx version, state it here. needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be extensions # coming with Sphinx (named 'sphinx.ext.*') or your custom ones. extensions = ['sphinx.ext.autodoc', 'sphinx.ext.autosummary'] # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] # The suffix of source filenames. source_suffix = '.rst' # The encoding of source files. #source_encoding = 'utf-8-sig' # The master toctree document. master_doc = 'index' # General information about the project. project = '%BOOK_ID%' copyright = "2009-%s %s. Released under the terms of the %s" % (year, authors, doc_license) # The version info for the project you're documenting, acts as replacement for # |version| and |release|, also used in various other places throughout the # built documents. # # The full version, including alpha/beta/rc tags. release = '%VERSION%' # The short X.Y version. version = release.rsplit('.', 1)[0] # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. #language = None # There are two options for replacing |today|: either, you set today to some # non-false value, then it is used: #today = '' # Else, today_fmt is used as the format for a strftime call. #today_fmt = '%B %d, %Y' # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. exclude_patterns = ['_build'] # The reST default role (used for this markup: `text`) to use for all documents. #default_role = None # If true, '()' will be appended to :func: etc. cross-reference text. #add_function_parentheses = True # If true, the current module name will be prepended to all description # unit titles (such as .. function::). #add_module_names = True # If true, sectionauthor and moduleauthor directives will be shown in the # output. They are ignored by default. #show_authors = False # The name of the Pygments (syntax highlighting) style to use. pygments_style = 'vs' # A list of ignored prefixes for module index sorting. #modindex_common_prefix = [] # -- Options for HTML output --------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. html_theme = 'pyramid' # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. #html_theme_options = {} # Add any paths that contain custom themes here, relative to this directory. #html_theme_path = [] html_style = 'pacemaker.css' # The name for this set of Sphinx documents. If None, it defaults to # " v documentation". html_title = "%BOOK_TITLE%" # A shorter title for the navigation bar. Default is the same as html_title. #html_short_title = None # The name of an image file (relative to this directory) to place at the top # of the sidebar. #html_logo = None # The name of an image file (within the static path) to use as favicon of the # docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 # pixels large. #html_favicon = None # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = [ '%SRC_DIR%/_static' ] # If not '', a 'Last updated on:' timestamp is inserted at every page bottom, # using the given strftime format. #html_last_updated_fmt = '%b %d, %Y' # If true, SmartyPants will be used to convert quotes and dashes to # typographically correct entities. #html_use_smartypants = True # Custom sidebar templates, maps document names to template names. #html_sidebars = {} # Additional templates that should be rendered to pages, maps page names to # template names. #html_additional_pages = {} # If false, no module index is generated. #html_domain_indices = True # If false, no index is generated. #html_use_index = True # If true, the index is split into individual pages for each letter. #html_split_index = False # If true, links to the reST sources are added to the pages. #html_show_sourcelink = True # If true, "Created using Sphinx" is shown in the HTML footer. Default is True. #html_show_sphinx = True # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. #html_show_copyright = True # If true, an OpenSearch description file will be output, and all pages will # contain a tag referring to it. The value of this option must be the # base URL from which the finished HTML is served. #html_use_opensearch = '' # This is the file name suffix for HTML files (e.g. ".xhtml"). #html_file_suffix = None # Output file base name for HTML help builder. htmlhelp_basename = 'Pacemakerdoc' # -- Options for LaTeX output -------------------------------------------------- latex_engine = "xelatex" latex_elements = { # The paper size ('letterpaper' or 'a4paper'). #'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). #'pointsize': '10pt', # Additional stuff for the LaTeX preamble. #'preamble': '', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, author, documentclass [howto/manual]). latex_documents = [ ('index', '%BOOK_ID%.tex', '%BOOK_TITLE%', authors, 'manual'), ] # The name of an image file (relative to this directory) to place at the top of # the title page. #latex_logo = None # For "manual" documents, if this is true, then toplevel headings are parts, # not chapters. #latex_use_parts = False # If true, show page references after internal links. #latex_show_pagerefs = False # If true, show URL addresses after external links. #latex_show_urls = False # Documents to append as an appendix to all manuals. #latex_appendices = [] # If false, no module index is generated. #latex_domain_indices = True # -- Options for manual page output -------------------------------------------- # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ ('index', '%BOOK_ID%', 'Part of the Pacemaker documentation set', [authors], 8) ] # If true, show URL addresses after external links. #man_show_urls = False # -- Options for Texinfo output ------------------------------------------------ # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ ('index', '%BOOK_ID%', '%BOOK_TITLE%', authors, '%BOOK_TITLE%', 'Pacemaker is an advanced, scalable high-availability cluster resource manager.', 'Miscellaneous'), ] # Documents to append as an appendix to all manuals. #texinfo_appendices = [] # If false, no module index is generated. #texinfo_domain_indices = True # How to display URL addresses: 'footnote', 'no', or 'inline'. #texinfo_show_urls = 'footnote' # -- Options for Epub output --------------------------------------------------- # Bibliographic Dublin Core info. epub_title = '%BOOK_TITLE%' epub_author = authors epub_publisher = 'ClusterLabs.org' epub_copyright = copyright # The language of the text. It defaults to the language option # or en if the language is not set. #epub_language = '' # The scheme of the identifier. Typical schemes are ISBN or URL. epub_scheme = 'URL' # The unique identifier of the text. This can be a ISBN number # or the project homepage. epub_identifier = 'https://www.clusterlabs.org/pacemaker/doc/2.1/%BOOK_ID%/epub/%BOOK_ID%.epub' # A unique identification for the text. epub_uid = 'ClusterLabs.org-Pacemaker-%BOOK_ID%' # A tuple containing the cover image and cover page html template filenames. #epub_cover = () # HTML files that should be inserted before the pages created by sphinx. # The format is a list of tuples containing the path and title. #epub_pre_files = [] # HTML files that should be inserted after the pages created by sphinx. # The format is a list of tuples containing the path and title. #epub_post_files = [] # A list of files that should not be packed into the epub file. epub_exclude_files = [ '_static/doctools.js', '_static/jquery.js', '_static/searchtools.js', '_static/underscore.js', '_static/basic.css', '_static/websupport.js', 'search.html', ] # The depth of the table of contents in toc.ncx. #epub_tocdepth = 3 # Allow duplicate toc entries. #epub_tocdup = True autosummary_generate = True