diff --git a/configure.ac b/configure.ac index 15529ec29c..10889ba40b 100644 --- a/configure.ac +++ b/configure.ac @@ -1,2043 +1,2006 @@ dnl dnl autoconf for Pacemaker dnl dnl Copyright 2009-2020 the Pacemaker project contributors dnl dnl The version control history for this file may have further details. dnl dnl This source code is licensed under the GNU General Public License version 2 dnl or later (GPLv2+) WITHOUT ANY WARRANTY. dnl =============================================== dnl Bootstrap dnl =============================================== AC_PREREQ(2.64) AC_CONFIG_MACRO_DIR([m4]) AC_DEFUN([AC_DATAROOTDIR_CHECKED]) dnl Suggested structure: dnl information on the package dnl checks for programs dnl checks for libraries dnl checks for header files dnl checks for types dnl checks for structures dnl checks for compiler characteristics dnl checks for library functions dnl checks for system services m4_include([version.m4]) AC_INIT([pacemaker], VERSION_NUMBER, [users@clusterlabs.org], [pacemaker], PCMK_URL) PCMK_FEATURES="" AC_CONFIG_AUX_DIR(.) AC_CANONICAL_HOST dnl Where #defines go (e.g. `AC_CHECK_HEADERS' below) dnl dnl Internal header: include/config.h dnl - Contains ALL defines dnl - include/config.h.in is generated automatically by autoheader dnl - NOT to be included in any header files except crm_internal.h dnl (which is also not to be included in any other header files) dnl dnl External header: include/crm_config.h dnl - Contains a subset of defines checked here dnl - Manually edit include/crm_config.h.in to have configure include dnl new defines dnl - Should not include HAVE_* defines dnl - Safe to include anywhere AC_CONFIG_HEADERS([include/config.h include/crm_config.h]) dnl 1.11: minimum automake version required dnl foreign: don't require GNU-standard top-level files dnl tar-ustar: use (older) POSIX variant of generated tar rather than v7 dnl silent-rules: allow "--enable-silent-rules" (no-op in 1.13+) dnl subdir-objects: keep .o's with their .c's (no-op in 2.0+) AM_INIT_AUTOMAKE([1.11 foreign tar-ustar silent-rules subdir-objects]) dnl Require pkg-config (with a minimum version) PKG_PROG_PKG_CONFIG(0.18) AS_IF([test "x${PKG_CONFIG}" != x], [], [AC_MSG_ERROR([pkgconfig must be installed to build ${PACKAGE}])]) dnl PKG_NOARCH_INSTALLDIR is not available prior to pkg-config 0.27 and dnl pkgconf 0.8.10 (uncomment next line to mimic that scenario) dnl m4_ifdef([PKG_NOARCH_INSTALLDIR], [m4_undefine([PKG_NOARCH_INSTALLDIR])]) m4_ifndef([PKG_NOARCH_INSTALLDIR], [ AC_DEFUN([PKG_NOARCH_INSTALLDIR], [ AC_SUBST([noarch_pkgconfigdir], ['${datadir}/pkgconfig']) ]) ]) PKG_NOARCH_INSTALLDIR dnl Example 2.4. Silent Custom Rule to Generate a File dnl %-bar.pc: %.pc dnl $(AM_V_GEN)$(LN_S) $(notdir $^) $@ dnl Versioned attributes implementation is not yet production-ready AC_DEFINE_UNQUOTED(ENABLE_VERSIONED_ATTRS, 0, [Enable versioned attributes]) CC_IN_CONFIGURE=yes export CC_IN_CONFIGURE LDD=ldd GLIB_TESTS dnl ======================================================================== dnl Compiler characteristics dnl ======================================================================== AC_PROG_CC dnl Can force other with environment variable "CC". AC_PROG_CC_STDC AC_PROG_CXX dnl C++ is not needed for build, just maintainer utilities dnl We use md5.c from gnulib, which has its own m4 macros. Per its docs: dnl "The macro gl_EARLY must be called as soon as possible after verifying that dnl the C compiler is working. ... The core part of the gnulib checks are done dnl by the macro gl_INIT." In addition, prevent gnulib from introducing OpenSSL dnl as a dependency. gl_EARLY gl_SET_CRYPTO_CHECK_DEFAULT([no]) gl_INIT # --enable-new-dtags: Use RUNPATH instead of RPATH. # It is necessary to have this done before libtool does linker detection. # See also: https://github.com/kronosnet/kronosnet/issues/107 AX_CHECK_LINK_FLAG([-Wl,--enable-new-dtags], [AM_LDFLAGS=-Wl,--enable-new-dtags], [AC_MSG_ERROR(["Linker support for --enable-new-dtags is required"])]) AC_SUBST([AM_LDFLAGS]) saved_LDFLAGS="$LDFLAGS" LDFLAGS="$AM_LDFLAGS $LDFLAGS" LT_INIT([dlopen]) LDFLAGS="$saved_LDFLAGS" LTDL_INIT([convenience]) AC_TYPE_SIZE_T AC_CHECK_SIZEOF(char) AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) AC_CHECK_SIZEOF(long long) dnl =============================================== dnl Helpers dnl =============================================== cc_supports_flag() { local CFLAGS="-Werror $@" AC_MSG_CHECKING(whether $CC supports "$@") AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[ ]])], [RC=0; AC_MSG_RESULT(yes)], [RC=1; AC_MSG_RESULT(no)]) return $RC } # Some tests need to use their own CFLAGS cc_temp_flags() { ac_save_CFLAGS="$CFLAGS" CFLAGS="$*" } cc_restore_flags() { CFLAGS=$ac_save_CFLAGS } dnl =============================================== dnl Configure Options dnl =============================================== dnl Actual library checks come later, but pkg-config can be used here to grab dnl external values to use as defaults for configure options dnl --enable-* options -AC_ARG_ENABLE([ansi], - [AS_HELP_STRING([--enable-ansi], - [force GCC to compile to ANSI standard for older compilers. @<:@no@:>@])], -) - AC_ARG_ENABLE([fatal-warnings], [AS_HELP_STRING([--enable-fatal-warnings], [enable pedantic and fatal warnings for gcc @<:@yes@:>@])], ) AC_ARG_ENABLE([quiet], [AS_HELP_STRING([--enable-quiet], [suppress make output unless there is an error @<:@no@:>@])], ) -AC_ARG_ENABLE([no-stack], - [AS_HELP_STRING([--enable-no-stack], - [build only the scheduler and its requirements @<:@no@:>@])], -) - AC_ARG_ENABLE([upstart], [AS_HELP_STRING([--enable-upstart], [enable support for managing resources via Upstart @<:@try@:>@])], [], [enable_upstart=try], ) AC_ARG_ENABLE([systemd], [AS_HELP_STRING([--enable-systemd], [enable support for managing resources via systemd @<:@try@:>@])], [], [enable_systemd=try], ) AC_ARG_ENABLE([hardening], [AS_HELP_STRING([--enable-hardening], [harden the resulting executables/libraries @<:@try@:>@])], [ HARDENING="${enableval}" ], [ HARDENING=try ], ) # By default, we add symlinks at the pre-2.0.0 daemon name locations, so that: # (1) tools that directly invoke those names for metadata etc. will still work # (2) this installation can be used in a bundle container image used with # cluster hosts running Pacemaker 1.1.17+ # If you know your target systems will not have any need for it, you can # disable this option. Once the above use cases are no longer in wide use, we # can disable this option by default, and once we no longer want to support # them at all, we can drop the option altogether. AC_ARG_ENABLE([legacy-links], [AS_HELP_STRING([--enable-legacy-links], [add symlinks for old daemon names @<:@yes@:>@])], [ LEGACY_LINKS="${enableval}" ], [ LEGACY_LINKS=yes ], ) AM_CONDITIONAL(BUILD_LEGACY_LINKS, test "x${LEGACY_LINKS}" = "xyes") dnl --with-* options AC_DEFUN([VERSION_ARG], [AC_ARG_WITH([version], [AS_HELP_STRING([--with-version=VERSION], [override package version @<:@$1@:>@])], [ PACKAGE_VERSION="$withval" ])] ) VERSION_ARG(VERSION_NUMBER) AC_ARG_WITH([corosync], [AS_HELP_STRING([--with-corosync], [support the Corosync messaging and membership layer])], [ SUPPORT_CS=$withval ], [ SUPPORT_CS=try ], ) AC_ARG_WITH([nagios], [AS_HELP_STRING([--with-nagios], [support nagios remote monitoring])], [ SUPPORT_NAGIOS=$withval ], [ SUPPORT_NAGIOS=try ], ) AC_ARG_WITH([nagios-plugin-dir], [AS_HELP_STRING([--with-nagios-plugin-dir=DIR], [directory for nagios plugins @<:@LIBEXECDIR/nagios/plugins@:>@])], [ NAGIOS_PLUGIN_DIR="$withval" ] ) AC_ARG_WITH([nagios-metadata-dir], [AS_HELP_STRING([--with-nagios-metadata-dir=DIR], [directory for nagios plugins metadata @<:@DATADIR/nagios/plugins-metadata@:>@])], [ NAGIOS_METADATA_DIR="$withval" ] ) AC_ARG_WITH([acl], [AS_HELP_STRING([--with-acl], [support CIB ACL])], [ SUPPORT_ACL=$withval ], [ SUPPORT_ACL=yes ], ) AC_ARG_WITH([cibsecrets], [AS_HELP_STRING([--with-cibsecrets], [support separate file for CIB secrets])], [ SUPPORT_CIBSECRETS=$withval ], [ SUPPORT_CIBSECRETS=no ], ) PCMK_GNUTLS_PRIORITIES="NORMAL" AC_ARG_WITH([gnutls-priorities], [AS_HELP_STRING([--with-gnutls-priorities], [default GnuTLS cipher priorities @<:@NORMAL@:>@])], [ test x"$withval" = x"no" || PCMK_GNUTLS_PRIORITIES="$withval" ] ) INITDIR="" AC_ARG_WITH([initdir], [AS_HELP_STRING([--with-initdir=DIR], [directory for init (rc) scripts])], [ INITDIR="$withval" ] ) systemdsystemunitdir="${systemdsystemunitdir-}" AC_ARG_WITH([systemdsystemunitdir], [AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [directory for systemd unit files (advanced option: must match what systemd uses)])], [ systemdsystemunitdir="$withval" ] ) SUPPORT_PROFILING=0 AC_ARG_WITH([profiling], [AS_HELP_STRING([--with-profiling], [disable optimizations for effective profiling])], [ SUPPORT_PROFILING=$withval ] ) AC_ARG_WITH([coverage], [AS_HELP_STRING([--with-coverage], [disable optimizations for effective profiling])], [ SUPPORT_COVERAGE=$withval ] ) BUG_URL="" AC_ARG_WITH([bug-url], [AS_HELP_STRING([--with-bug-url=DIR], [address where users should submit bug reports @<:@https://bugs.clusterlabs.org/enter_bug.cgi?product=Pacemaker@:>@])], [ BUG_URL="$withval" ] ) CONFIGDIR="" AC_ARG_WITH([configdir], [AS_HELP_STRING([--with-configdir=DIR], [directory for Pacemaker configuration file @<:@SYSCONFDIR/sysconfig@:>@])], [ CONFIGDIR="$withval" ] ) CRM_LOG_DIR="" AC_ARG_WITH([logdir], [AS_HELP_STRING([--with-logdir=DIR], [directory for Pacemaker log file @<:@LOCALSTATEDIR/log/pacemaker@:>@])], [ CRM_LOG_DIR="$withval" ] ) CRM_BUNDLE_DIR="" AC_ARG_WITH([bundledir], [AS_HELP_STRING([--with-bundledir=DIR], [directory for Pacemaker bundle logs @<:@LOCALSTATEDIR/log/pacemaker/bundles@:>@])], [ CRM_BUNDLE_DIR="$withval" ] ) AC_ARG_WITH([sanitizers], [AS_HELP_STRING([--with-sanitizers=...,...], [enable SANitizer build, do *NOT* use for production. Only ASAN/UBSAN/TSAN are currently supported])], [ SANITIZERS="$withval" ], [ SANITIZERS="" ]) dnl The not-yet-released autoconf 2.70 will have a --runstatedir option. dnl Until that's available, emulate it with our own --with-runstatedir. pcmk_runstatedir="" AC_ARG_WITH([runstatedir], [AS_HELP_STRING([--with-runstatedir=DIR], [modifiable per-process data @<:@LOCALSTATEDIR/run@:>@ (ignored if --runstatedir is available)])], [ pcmk_runstatedir="$withval" ] ) dnl This defaults to /usr/lib rather than libdir because it's determined by the dnl OCF project and not pacemaker. Even if a user wants to install pacemaker to dnl /usr/local or such, the OCF agents will be expected in their usual dnl location. However, we do give the user the option to override it. OCF_ROOT_DIR="/usr/lib/ocf" AC_ARG_WITH([ocfdir], [AS_HELP_STRING([--with-ocfdir=DIR], [OCF resource agent root directory (advanced option: changing this may break other cluster components unless similarly configured) @<:@/usr/lib/ocf@:>@])], [ OCF_ROOT_DIR="$withval" ] ) AC_SUBST(OCF_ROOT_DIR) dnl Get default from fence-agents if available PKG_CHECK_VAR([FA_PREFIX], [fence-agents], [prefix], [PCMK__FENCE_BINDIR="${FA_PREFIX}/sbin"], [PCMK__FENCE_BINDIR="$sbindir"]) AC_ARG_WITH([fence-bindir], [AS_HELP_STRING([--with-fence-bindir=DIR], m4_normalize([ directory for executable fence agents @<:@value from fence-agents package if available otherwise SBINDIR@:>@]))], [ PCMK__FENCE_BINDIR="$withval" ] ) AC_SUBST(PCMK__FENCE_BINDIR) CRM_DAEMON_USER="" AC_ARG_WITH([daemon-user], [AS_HELP_STRING([--with-daemon-user=USER], [user to run unprivileged Pacemaker daemons as (advanced option: changing this may break other cluster components unless similarly configured) @<:@hacluster@:>@])], [ CRM_DAEMON_USER="$withval" ] ) CRM_DAEMON_GROUP="" AC_ARG_WITH([daemon-group], [AS_HELP_STRING([--with-daemon-group=GROUP], [group to run unprivileged Pacemaker daemons as (advanced option: changing this may break other cluster components unless similarly configured) @<:@haclient@:>@])], [ CRM_DAEMON_GROUP="$withval" ] ) -dnl Deprecated options - -AC_ARG_WITH([pkg-name], - [AS_HELP_STRING([--with-pkg-name=name], - [deprecated and unused (will be removed in a future release)])], -) - -AC_ARG_WITH([pkgname], - [AS_HELP_STRING([--with-pkgname=name], - [deprecated and unused (will be removed in a future release)])], -) - - dnl =============================================== dnl General Processing dnl =============================================== AC_DEFINE_UNQUOTED(PACEMAKER_VERSION, "$PACKAGE_VERSION", [Current pacemaker version]) PACKAGE_SERIES=`echo $PACKAGE_VERSION | awk -F. '{ print $1"."$2 }'` AC_SUBST(PACKAGE_SERIES) AC_SUBST(PACKAGE_VERSION) AC_PROG_LN_S AC_PROG_MKDIR_P if cc_supports_flag -Werror; then WERROR="-Werror" else WERROR="" fi # Normalize enable_fatal_warnings (defaulting to yes, when compiler supports it) if test "x${enable_fatal_warnings}" != "xno" ; then if test "$GCC" = "yes" && test "x${WERROR}" != "x" ; then enable_fatal_warnings=yes else AC_MSG_NOTICE(Compiler does not support fatal warnings) enable_fatal_warnings=no fi fi INIT_EXT="" echo Our Host OS: $host_os/$host AC_MSG_NOTICE(Sanitizing prefix: ${prefix}) case $prefix in NONE) prefix=/usr dnl Fix default variables - "prefix" variable if not specified if test "$localstatedir" = "\${prefix}/var"; then localstatedir="/var" fi if test "$sysconfdir" = "\${prefix}/etc"; then sysconfdir="/etc" fi ;; esac AC_MSG_NOTICE(Sanitizing exec_prefix: ${exec_prefix}) case $exec_prefix in prefix|NONE) exec_prefix=$prefix ;; esac AC_MSG_NOTICE(Sanitizing INITDIR: ${INITDIR}) case $INITDIR in prefix) INITDIR=$prefix;; "") AC_MSG_CHECKING(which init (rc) directory to use) for initdir in /etc/init.d /etc/rc.d/init.d /sbin/init.d \ /usr/local/etc/rc.d /etc/rc.d do if test -d $initdir then INITDIR=$initdir break fi done AC_MSG_RESULT($INITDIR) ;; esac AC_SUBST(INITDIR) AC_MSG_NOTICE(Sanitizing libdir: ${libdir}) case $libdir in prefix|NONE) AC_MSG_CHECKING(which lib directory to use) for aDir in lib64 lib do trydir="${exec_prefix}/${aDir}" if test -d ${trydir} then libdir=${trydir} break fi done AC_MSG_RESULT($libdir); ;; esac dnl Expand autoconf variables so that we don't end up with '${prefix}' dnl in #defines and python scripts dnl NOTE: Autoconf deliberately leaves them unexpanded to allow dnl make exec_prefix=/foo install dnl No longer being able to do this seems like no great loss to me... eval prefix="`eval echo ${prefix}`" eval exec_prefix="`eval echo ${exec_prefix}`" eval bindir="`eval echo ${bindir}`" eval sbindir="`eval echo ${sbindir}`" eval libexecdir="`eval echo ${libexecdir}`" eval datadir="`eval echo ${datadir}`" eval sysconfdir="`eval echo ${sysconfdir}`" eval sharedstatedir="`eval echo ${sharedstatedir}`" eval localstatedir="`eval echo ${localstatedir}`" eval libdir="`eval echo ${libdir}`" eval includedir="`eval echo ${includedir}`" eval oldincludedir="`eval echo ${oldincludedir}`" eval infodir="`eval echo ${infodir}`" eval mandir="`eval echo ${mandir}`" dnl Home-grown variables if [ test "x${runstatedir}" = "x" ]; then if [ test "x${pcmk_runstatedir}" = "x" ]; then runstatedir="${localstatedir}/run" else runstatedir="${pcmk_runstatedir}" fi fi eval runstatedir="$(eval echo ${runstatedir})" AC_DEFINE_UNQUOTED([PCMK_RUN_DIR], ["$runstatedir"], [Location for modifiable per-process data]) AC_SUBST(runstatedir) eval INITDIR="${INITDIR}" eval docdir="`eval echo ${docdir}`" if test x"${docdir}" = x""; then docdir=${datadir}/doc/${PACKAGE}-${VERSION} fi AC_SUBST(docdir) if test x"${CONFIGDIR}" = x""; then CONFIGDIR="${sysconfdir}/sysconfig" fi AC_SUBST(CONFIGDIR) if test x"${CRM_LOG_DIR}" = x""; then CRM_LOG_DIR="${localstatedir}/log/pacemaker" fi AC_DEFINE_UNQUOTED(CRM_LOG_DIR,"$CRM_LOG_DIR", Location for Pacemaker log file) AC_SUBST(CRM_LOG_DIR) if test x"${CRM_BUNDLE_DIR}" = x""; then CRM_BUNDLE_DIR="${localstatedir}/log/pacemaker/bundles" fi AC_DEFINE_UNQUOTED(CRM_BUNDLE_DIR,"$CRM_BUNDLE_DIR", Location for Pacemaker bundle logs) AC_SUBST(CRM_BUNDLE_DIR) eval PCMK__FENCE_BINDIR="`eval echo ${PCMK__FENCE_BINDIR}`" AC_DEFINE_UNQUOTED(PCMK__FENCE_BINDIR,"$PCMK__FENCE_BINDIR", [Location for executable fence agents]) if test x"${PCMK_GNUTLS_PRIORITIES}" = x""; then AC_MSG_ERROR([Empty string not applicable with --with-gnutls-priorities]) fi AC_DEFINE_UNQUOTED([PCMK_GNUTLS_PRIORITIES], ["$PCMK_GNUTLS_PRIORITIES"], [GnuTLS cipher priorities]) if test x"${BUG_URL}" = x""; then BUG_URL="https://bugs.clusterlabs.org/enter_bug.cgi?product=Pacemaker" fi AC_SUBST(BUG_URL) for j in prefix exec_prefix bindir sbindir libexecdir datadir sysconfdir \ sharedstatedir localstatedir libdir includedir oldincludedir infodir \ mandir INITDIR docdir CONFIGDIR do dirname=`eval echo '${'${j}'}'` if test ! -d "$dirname" then AC_MSG_WARN([$j directory ($dirname) does not exist!]) fi done us_auth= AC_CHECK_HEADER([sys/socket.h], [ AC_CHECK_DECL([SO_PEERCRED], [ # Linux AC_CHECK_TYPE([struct ucred], [ us_auth=peercred_ucred; AC_DEFINE([US_AUTH_PEERCRED_UCRED], [1], [Define if Unix socket auth method is getsockopt(s, SO_PEERCRED, &ucred, ...)]) ], [ # OpenBSD AC_CHECK_TYPE([struct sockpeercred], [ us_auth=localpeercred_sockepeercred; AC_DEFINE([US_AUTH_PEERCRED_SOCKPEERCRED], [1], [Define if Unix socket auth method is getsockopt(s, SO_PEERCRED, &sockpeercred, ...)]) ], [], [[#include ]]) ], [[#define _GNU_SOURCE #include ]]) ], [], [[#include ]]) ]) if test -z "${us_auth}"; then # FreeBSD AC_CHECK_DECL([getpeereid], [ us_auth=getpeereid; AC_DEFINE([US_AUTH_GETPEEREID], [1], [Define if Unix socket auth method is getpeereid(s, &uid, &gid)]) ], [ # Solaris/OpenIndiana AC_CHECK_DECL([getpeerucred], [ us_auth=getpeerucred; AC_DEFINE([US_AUTH_GETPEERUCRED], [1], [Define if Unix socket auth method is getpeercred(s, &ucred)]) ], [ AC_MSG_ERROR([No way to authenticate a Unix socket peer]) ], [[#include ]]) ]) fi dnl This OS-based decision-making is poor autotools practice; dnl feature-based mechanisms are strongly preferred. dnl dnl So keep this section to a bare minimum; regard as a "necessary evil". case "$host_os" in *bsd*) AC_DEFINE_UNQUOTED(ON_BSD, 1, Compiling for BSD platform) INIT_EXT=".sh" ;; *solaris*) AC_DEFINE_UNQUOTED(ON_SOLARIS, 1, Compiling for Solaris platform) ;; *linux*) AC_DEFINE_UNQUOTED(ON_LINUX, 1, Compiling for Linux platform) ;; darwin*) AC_DEFINE_UNQUOTED(ON_DARWIN, 1, Compiling for Darwin platform) LIBS="$LIBS -L${prefix}/lib" CFLAGS="$CFLAGS -I${prefix}/include" ;; esac AC_SUBST(INIT_EXT) AC_MSG_NOTICE(Host CPU: $host_cpu) case "$host_cpu" in ppc64|powerpc64) case $CFLAGS in *powerpc64*) ;; *) if test "$GCC" = yes; then CFLAGS="$CFLAGS -m64" fi ;; esac ;; esac # C99 doesn't guarantee uint64_t type and related format specifiers, but # prerequisites, corosync + libqb, use that widely, so the target platforms # are already pre-constrained to those "64bit-clean" (doesn't imply native # bit width) and hence we deliberately refrain from artificial surrogates # (sans manipulation through cached values). AC_CACHE_VAL( [pcmk_cv_decl_inttypes], [ AC_CHECK_DECLS( [PRIu64, PRIu32, PRIx32, SCNu64], [pcmk_cv_decl_inttypes="PRIu64 PRIu32 PRIx32 SCNu64"], [ # test shall only react on "no" cached result & error out respectively if test "x$ac_cv_have_decl_PRIu64" = xno; then AC_MSG_ERROR([lack of inttypes.h based specifier serving uint64_t (PRIu64)]) elif test "x$ac_cv_have_decl_PRIu32" = xno; then AC_MSG_ERROR([lack of inttypes.h based specifier serving uint32_t (PRIu32)]) elif test "x$ac_cv_have_decl_PRIx32" = xno; then AC_MSG_ERROR([lack of inttypes.h based hexa specifier serving uint32_t (PRIx32)]) elif test "x$ac_cv_have_decl_SCNu64" = xno; then AC_MSG_ERROR([lack of inttypes.h based specifier gathering uint64_t (SCNu64)]) fi ], [[#include ]] ) ] ) ( set $pcmk_cv_decl_inttypes AC_DEFINE_UNQUOTED([U64T], [$1], [Correct format specifier for U64T]) AC_DEFINE_UNQUOTED([U32T], [$2], [Correct format specifier for U32T]) AC_DEFINE_UNQUOTED([X32T], [$3], [Correct format specifier for X32T]) AC_DEFINE_UNQUOTED([U64TS], [$4], [Correct format specifier for U64TS]) ) dnl =============================================== dnl Program Paths dnl =============================================== PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin" export PATH dnl Replacing AC_PROG_LIBTOOL with AC_CHECK_PROG because LIBTOOL dnl was NOT being expanded all the time thus causing things to fail. AC_CHECK_PROGS(LIBTOOL, glibtool libtool libtool15 libtool13) dnl Pacemaker's executable python scripts will invoke the python specified by dnl configure's PYTHON variable. If not specified, AM_PATH_PYTHON will check a dnl built-in list with (unversioned) "python" having precedence. To configure dnl Pacemaker to use a specific python interpreter version, define PYTHON dnl when calling configure, for example: ./configure PYTHON=/usr/bin/python3.6 dnl Ensure PYTHON is an absolute path if test x"${PYTHON}" != x""; then AC_PATH_PROG([PYTHON], [$PYTHON]) fi dnl Pacemaker requires a minimum Python version of 3.2 AM_PATH_PYTHON([3.2]) AC_PATH_PROGS([ASCIIDOC_CONV], [asciidoc asciidoctor]) AC_PATH_PROG([HELP2MAN], [help2man]) AC_PATH_PROG([SPHINX], [sphinx-build]) AC_PATH_PROG([INKSCAPE], [inkscape]) AC_PATH_PROG([XSLTPROC], [xsltproc]) AC_PATH_PROG([XMLCATALOG], [xmlcatalog]) dnl BASH is already an environment variable, so use something else AC_PATH_PROG([BASH_PATH], [bash]) AC_PATH_PROGS(VALGRIND_BIN, valgrind, /usr/bin/valgrind) AC_DEFINE_UNQUOTED(VALGRIND_BIN, "$VALGRIND_BIN", Valgrind command) if test x"${LIBTOOL}" = x""; then AC_MSG_ERROR(You need (g)libtool installed in order to build ${PACKAGE}) fi dnl Bash is needed for building man pages and running regression tests if test x"${BASH_PATH}" = x""; then AC_MSG_ERROR(bash must be installed in order to build ${PACKAGE}) fi AM_CONDITIONAL(BUILD_HELP, test x"${HELP2MAN}" != x"") if test x"${HELP2MAN}" != x""; then PCMK_FEATURES="$PCMK_FEATURES generated-manpages" fi MANPAGE_XSLT="" if test x"${XSLTPROC}" != x""; then AC_MSG_CHECKING(docbook to manpage transform) # first try to figure out correct template using xmlcatalog query, # resort to extensive (semi-deterministic) file search if that fails DOCBOOK_XSL_URI='http://docbook.sourceforge.net/release/xsl/current' DOCBOOK_XSL_PATH='manpages/docbook.xsl' MANPAGE_XSLT=$(${XMLCATALOG} "" ${DOCBOOK_XSL_URI}/${DOCBOOK_XSL_PATH} \ | sed -n 's|^file://||p;q') if test x"${MANPAGE_XSLT}" = x""; then DIRS=$(find "${datadir}" -name $(basename $(dirname ${DOCBOOK_XSL_PATH})) \ -type d | LC_ALL=C sort) XSLT=$(basename ${DOCBOOK_XSL_PATH}) for d in ${DIRS}; do if test -f "${d}/${XSLT}"; then MANPAGE_XSLT="${d}/${XSLT}" break fi done fi fi AC_MSG_RESULT($MANPAGE_XSLT) AC_SUBST(MANPAGE_XSLT) AM_CONDITIONAL(BUILD_XML_HELP, test x"${MANPAGE_XSLT}" != x"") if test x"${MANPAGE_XSLT}" != x""; then PCMK_FEATURES="$PCMK_FEATURES agent-manpages" fi AM_CONDITIONAL([IS_ASCIIDOC], [echo "${ASCIIDOC_CONV}" | grep -Eq 'asciidoc$']) AM_CONDITIONAL([BUILD_ASCIIDOC], [test "x${ASCIIDOC_CONV}" != x]) if test "x${ASCIIDOC_CONV}" != x; then PCMK_FEATURES="$PCMK_FEATURES ascii-docs" fi AM_CONDITIONAL([BUILD_SPHINX_DOCS], [test x"${SPHINX}" != x"" && test x"${INKSCAPE}" != x""]) dnl Pacemaker's shell scripts (and thus man page builders) rely on GNU getopt AC_MSG_CHECKING([for GNU-compatible getopt]) IFS_orig=$IFS IFS=: for PATH_DIR in $PATH; do IFS=$IFS_orig GETOPT_PATH="${PATH_DIR}/getopt" if test -f "$GETOPT_PATH" && test -x "$GETOPT_PATH" ; then $GETOPT_PATH -T >/dev/null 2>/dev/null if test $? -eq 4; then break fi fi GETOPT_PATH="" done IFS=$IFS_orig if test -n "$GETOPT_PATH"; then AC_MSG_RESULT([$GETOPT_PATH]) else AC_MSG_RESULT([no]) AC_MSG_ERROR(Pacemaker build requires a GNU-compatible getopt) fi AC_SUBST([GETOPT_PATH]) dnl ======================================================================== dnl checks for library functions to replace them dnl dnl NoSuchFunctionName: dnl is a dummy function which no system supplies. It is here to make dnl the system compile semi-correctly on OpenBSD which doesn't know dnl how to create an empty archive dnl dnl scandir: Only on BSD. dnl System-V systems may have it, but hidden and/or deprecated. dnl A replacement function is supplied for it. dnl dnl setenv: is some bsdish function that should also be avoided (use dnl putenv instead) dnl On the other hand, putenv doesn't provide the right API for the dnl code and has memory leaks designed in (sigh...) Fortunately this dnl A replacement function is supplied for it. dnl dnl strerror: returns a string that corresponds to an errno. dnl A replacement function is supplied for it. dnl dnl strnlen: is a gnu function similar to strlen, but safer. dnl We wrote a tolerably-fast replacement function for it. dnl dnl strndup: is a gnu function similar to strdup, but safer. dnl We wrote a tolerably-fast replacement function for it. AC_REPLACE_FUNCS(alphasort NoSuchFunctionName scandir setenv strerror strchrnul unsetenv strnlen strndup) dnl =============================================== dnl Libraries dnl =============================================== AC_CHECK_LIB(socket, socket) dnl -lsocket AC_CHECK_LIB(c, dlopen) dnl if dlopen is in libc... AC_CHECK_LIB(dl, dlopen) dnl -ldl (for Linux) AC_CHECK_LIB(rt, sched_getscheduler) dnl -lrt (for Tru64) AC_CHECK_LIB(gnugetopt, getopt_long) dnl -lgnugetopt ( if available ) AC_CHECK_LIB(pam, pam_start) dnl -lpam (if available) AC_CHECK_FUNCS([sched_setscheduler]) if test "$ac_cv_func_sched_setscheduler" != yes; then PC_LIBS_RT="" else PC_LIBS_RT="-lrt" fi AC_SUBST(PC_LIBS_RT) AC_CHECK_LIB(uuid, uuid_parse) dnl load the library if necessary AC_CHECK_FUNCS(uuid_unparse) dnl OSX ships uuid_* as standard functions AC_CHECK_HEADERS(uuid/uuid.h) if test "x$ac_cv_func_uuid_unparse" != xyes; then AC_MSG_ERROR(You do not have the libuuid development package installed) fi # Require glib 2.32.0 (2012-03) or later PKG_CHECK_MODULES([GLIB], [glib-2.0 >= 2.32.0], [CPPFLAGS="${CPPFLAGS} ${GLIB_CFLAGS}" LIBS="${LIBS} ${GLIB_LIBS}"]) # # Where is dlopen? # if test "$ac_cv_lib_c_dlopen" = yes; then LIBADD_DL="" elif test "$ac_cv_lib_dl_dlopen" = yes; then LIBADD_DL=-ldl else LIBADD_DL=${lt_cv_dlopen_libs} fi dnl ======================================================================== dnl Headers dnl ======================================================================== # Some distributions insert #warnings into deprecated headers. If we will # enable fatal warnings for the build, then enable them for the header checks # as well, otherwise the build could fail even though the header check # succeeds. (We should probably be doing this in more places.) if test "x${enable_fatal_warnings}" = xyes ; then cc_temp_flags "$CFLAGS $WERROR" fi AC_CHECK_HEADERS(arpa/inet.h) AC_CHECK_HEADERS(ctype.h) AC_CHECK_HEADERS(dirent.h) AC_CHECK_HEADERS(errno.h) AC_CHECK_HEADERS(getopt.h) AC_CHECK_HEADERS(glib.h) AC_CHECK_HEADERS(grp.h) AC_CHECK_HEADERS(limits.h) AC_CHECK_HEADERS(linux/swab.h) AC_CHECK_HEADERS(malloc.h) AC_CHECK_HEADERS(netdb.h) AC_CHECK_HEADERS(netinet/in.h) AC_CHECK_HEADERS(netinet/ip.h) AC_CHECK_HEADERS(pwd.h) AC_CHECK_HEADERS(sgtty.h) AC_CHECK_HEADERS(signal.h) AC_CHECK_HEADERS(stdarg.h) AC_CHECK_HEADERS(stddef.h) AC_CHECK_HEADERS(stdio.h) AC_CHECK_HEADERS(stdlib.h) AC_CHECK_HEADERS(string.h) AC_CHECK_HEADERS(strings.h) AC_CHECK_HEADERS(sys/dir.h) AC_CHECK_HEADERS(sys/ioctl.h) AC_CHECK_HEADERS(sys/param.h) AC_CHECK_HEADERS(sys/reboot.h) AC_CHECK_HEADERS(sys/resource.h) AC_CHECK_HEADERS(sys/socket.h) AC_CHECK_HEADERS(sys/signalfd.h) AC_CHECK_HEADERS(sys/sockio.h) AC_CHECK_HEADERS(sys/stat.h) AC_CHECK_HEADERS(sys/time.h) AC_CHECK_HEADERS(sys/types.h) AC_CHECK_HEADERS(sys/utsname.h) AC_CHECK_HEADERS(sys/wait.h) AC_CHECK_HEADERS(time.h) AC_CHECK_HEADERS(unistd.h) if test "x${enable_fatal_warnings}" = xyes ; then cc_restore_flags fi dnl These headers need prerequisites before the tests will pass dnl AC_CHECK_HEADERS(net/if.h) PKG_CHECK_MODULES(LIBXML2, [libxml-2.0], [CPPFLAGS="${CPPFLAGS} ${LIBXML2_CFLAGS}" LIBS="${LIBS} ${LIBXML2_LIBS}"]) AC_CHECK_HEADERS(libxml/xpath.h) if test "$ac_cv_header_libxml_xpath_h" != "yes"; then AC_MSG_ERROR(libxml development headers not found) fi AC_CHECK_LIB(xslt, xsltApplyStylesheet, [], AC_MSG_ERROR(Unsupported libxslt library version)) AC_CHECK_HEADERS(libxslt/xslt.h) if test "$ac_cv_header_libxslt_xslt_h" != "yes"; then AC_MSG_ERROR(libxslt development headers not found) fi AC_CACHE_CHECK(whether __progname and __progname_full are available, pf_cv_var_progname, AC_TRY_LINK([extern char *__progname, *__progname_full;], [__progname = "foo"; __progname_full = "foo bar";], pf_cv_var_progname="yes", pf_cv_var_progname="no")) if test "$pf_cv_var_progname" = "yes"; then AC_DEFINE(HAVE___PROGNAME,1,[ ]) fi dnl ======================================================================== dnl Generic declarations dnl ======================================================================== AC_CHECK_DECLS([CLOCK_MONOTONIC], [], [], [[ #include ]]) dnl ======================================================================== dnl Structures dnl ======================================================================== AC_CHECK_MEMBERS([struct tm.tm_gmtoff],,,[[#include ]]) AC_CHECK_MEMBER([struct dirent.d_type], AC_DEFINE(HAVE_STRUCT_DIRENT_D_TYPE,1,[Define this if struct dirent has d_type]),, [#include ]) dnl ======================================================================== dnl Functions dnl ======================================================================== AC_CHECK_FUNCS(getopt, AC_DEFINE(HAVE_DECL_GETOPT, 1, [Have getopt function])) AC_CHECK_FUNCS(nanosleep, AC_DEFINE(HAVE_DECL_NANOSLEEP, 1, [Have nanosleep function])) AC_CACHE_CHECK(whether sscanf supports %m, pf_cv_var_sscanf, AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include const char *s = "some-command-line-arg"; int main(int argc, char **argv) { char *name = NULL; int n = sscanf(s, "%ms", &name); return n == 1 ? 0 : 1; } ]])], pf_cv_var_sscanf="yes", pf_cv_var_sscanf="no", pf_cv_var_sscanf="no")) if test "$pf_cv_var_sscanf" = "yes"; then AC_DEFINE(SSCANF_HAS_M, 1, [ ]) fi dnl ======================================================================== dnl bzip2 dnl ======================================================================== AC_CHECK_HEADERS(bzlib.h) AC_CHECK_LIB(bz2, BZ2_bzBuffToBuffCompress) if test x$ac_cv_lib_bz2_BZ2_bzBuffToBuffCompress != xyes ; then AC_MSG_ERROR(BZ2 libraries not found) fi if test x$ac_cv_header_bzlib_h != xyes; then AC_MSG_ERROR(BZ2 Development headers not found) fi dnl ======================================================================== dnl sighandler_t is missing from Illumos, Solaris11 systems dnl ======================================================================== AC_MSG_CHECKING([for sighandler_t]) AC_TRY_COMPILE([#include ],[sighandler_t *f;], has_sighandler_t=yes,has_sighandler_t=no) AC_MSG_RESULT($has_sighandler_t) if test "$has_sighandler_t" = "yes" ; then AC_DEFINE( HAVE_SIGHANDLER_T, 1, [Define if sighandler_t available] ) fi dnl ======================================================================== dnl ncurses dnl ======================================================================== dnl dnl A few OSes (e.g. Linux) deliver a default "ncurses" alongside "curses". dnl Many non-Linux deliver "curses"; sites may add "ncurses". dnl dnl However, the source-code recommendation for both is to #include "curses.h" dnl (i.e. "ncurses" still wants the include to be simple, no-'n', "curses.h"). dnl dnl ncurse takes precedence. dnl AC_CHECK_HEADERS(curses.h) AC_CHECK_HEADERS(curses/curses.h) AC_CHECK_HEADERS(ncurses.h) AC_CHECK_HEADERS(ncurses/ncurses.h) dnl Although n-library is preferred, only look for it if the n-header was found. CURSESLIBS='' PC_NAME_CURSES="" PC_LIBS_CURSES="" if test "$ac_cv_header_ncurses_h" = "yes"; then AC_CHECK_LIB(ncurses, printw, [AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]) CURSESLIBS=`$PKG_CONFIG --libs ncurses` || CURSESLIBS='-lncurses' PC_NAME_CURSES="ncurses" fi if test "$ac_cv_header_ncurses_ncurses_h" = "yes"; then AC_CHECK_LIB(ncurses, printw, [AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]) CURSESLIBS=`$PKG_CONFIG --libs ncurses` || CURSESLIBS='-lncurses' PC_NAME_CURSES="ncurses" fi dnl Only look for non-n-library if there was no n-library. if test X"$CURSESLIBS" = X"" -a "$ac_cv_header_curses_h" = "yes"; then AC_CHECK_LIB(curses, printw, [CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]) PC_LIBS_CURSES="$CURSESLIBS" fi dnl Only look for non-n-library if there was no n-library. if test X"$CURSESLIBS" = X"" -a "$ac_cv_header_curses_curses_h" = "yes"; then AC_CHECK_LIB(curses, printw, [CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]) PC_LIBS_CURSES="$CURSESLIBS" fi if test "x$CURSESLIBS" != "x"; then PCMK_FEATURES="$PCMK_FEATURES ncurses" fi dnl Check for printw() prototype compatibility if test X"$CURSESLIBS" != X"" && cc_supports_flag -Wcast-qual; then ac_save_LIBS=$LIBS LIBS="$CURSESLIBS" cc_temp_flags "-Wcast-qual $WERROR" # avoid broken test because of hardened build environment in Fedora 23+ # - https://fedoraproject.org/wiki/Changes/Harden_All_Packages # - https://bugzilla.redhat.com/1297985 if cc_supports_flag -fPIC; then CFLAGS="$CFLAGS -fPIC" fi AC_MSG_CHECKING(whether printw() requires argument of "const char *") AC_LINK_IFELSE( [AC_LANG_PROGRAM([ #if defined(HAVE_NCURSES_H) # include #elif defined(HAVE_NCURSES_NCURSES_H) # include #elif defined(HAVE_CURSES_H) # include #endif ], [printw((const char *)"Test");] )], [pcmk_cv_compatible_printw=yes], [pcmk_cv_compatible_printw=no] ) LIBS=$ac_save_LIBS cc_restore_flags AC_MSG_RESULT([$pcmk_cv_compatible_printw]) if test "$pcmk_cv_compatible_printw" = no; then AC_MSG_WARN([The printw() function of your ncurses or curses library is old, we will disable usage of the library. If you want to use this library anyway, please update to newer version of the library, ncurses 5.4 or later is recommended. You can get the library from http://www.gnu.org/software/ncurses/.]) AC_MSG_NOTICE([Disabling curses]) AC_DEFINE(HAVE_INCOMPATIBLE_PRINTW, 1, [Do we have incompatible printw() in curses library?]) fi fi AC_SUBST(CURSESLIBS) AC_SUBST(PC_NAME_CURSES) AC_SUBST(PC_LIBS_CURSES) dnl ======================================================================== dnl Profiling and GProf dnl ======================================================================== AC_MSG_NOTICE(Old CFLAGS: $CFLAGS) case $SUPPORT_COVERAGE in 1|yes|true) SUPPORT_PROFILING=1 PCMK_FEATURES="$PCMK_FEATURES coverage" CFLAGS="$CFLAGS -fprofile-arcs -ftest-coverage" dnl During linking, make sure to specify -lgcov or -coverage ;; esac case $SUPPORT_PROFILING in 1|yes|true) SUPPORT_PROFILING=1 dnl Disable various compiler optimizations CFLAGS="$CFLAGS -fno-omit-frame-pointer -fno-inline -fno-builtin " dnl CFLAGS="$CFLAGS -fno-inline-functions -fno-default-inline -fno-inline-functions-called-once -fno-optimize-sibling-calls" dnl Turn off optimization so tools can get accurate line numbers CFLAGS=`echo $CFLAGS | sed -e 's/-O.\ //g' -e 's/-Wp,-D_FORTIFY_SOURCE=.\ //g' -e 's/-D_FORTIFY_SOURCE=.\ //g'` CFLAGS="$CFLAGS -O0 -g3 -gdwarf-2" dnl Update features PCMK_FEATURES="$PCMK_FEATURES profile" ;; *) SUPPORT_PROFILING=0 ;; esac AC_MSG_NOTICE(New CFLAGS: $CFLAGS) AC_DEFINE_UNQUOTED(SUPPORT_PROFILING, $SUPPORT_PROFILING, Support for profiling) dnl ======================================================================== dnl Cluster infrastructure - LibQB dnl ======================================================================== -if test x${enable_no_stack} = xyes; then - SUPPORT_CS=no -fi - PKG_CHECK_MODULES(libqb, libqb >= 0.17) CPPFLAGS="$libqb_CFLAGS $CPPFLAGS" LIBS="$libqb_LIBS $LIBS" dnl libqb 2.0.2+ (2020-10) AC_CHECK_FUNCS(qb_ipcc_auth_get, AC_DEFINE(HAVE_IPCC_AUTH_GET, 1, [Have qb_ipcc_auth_get function])) PCMK_FEATURES="$PCMK_FEATURES libqb-logging libqb-ipc" dnl libqb 2.0.0+ (2020-05) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_MAX_LINE_LEN]) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_ELLIPSIS]) dnl Support Linux-HA fence agents if available if test "$cross_compiling" != "yes"; then CPPFLAGS="$CPPFLAGS -I${prefix}/include/heartbeat" fi AC_CHECK_HEADERS(stonith/stonith.h) if test "$ac_cv_header_stonith_stonith_h" = "yes"; then dnl On Debian, AC_CHECK_LIBS fail if a library has any unresolved symbols dnl So check for all the dependencies (so they're added to LIBS) before checking for -lplumb AC_CHECK_LIB(pils, PILLoadPlugin) AC_CHECK_LIB(plumb, G_main_add_IPC_Channel) PCMK_FEATURES="$PCMK_FEATURES lha-fencing" fi AM_CONDITIONAL([BUILD_LHA_SUPPORT], [test "$ac_cv_header_stonith_stonith_h" = "yes"]) dnl =============================================== dnl Variables needed for substitution dnl =============================================== CRM_SCHEMA_DIRECTORY="${datadir}/pacemaker" AC_DEFINE_UNQUOTED(CRM_SCHEMA_DIRECTORY,"$CRM_SCHEMA_DIRECTORY", Location for the Pacemaker Relax-NG Schema) AC_SUBST(CRM_SCHEMA_DIRECTORY) CRM_CORE_DIR="${localstatedir}/lib/pacemaker/cores" AC_DEFINE_UNQUOTED(CRM_CORE_DIR,"$CRM_CORE_DIR", Location to store core files produced by Pacemaker daemons) AC_SUBST(CRM_CORE_DIR) if test x"${CRM_DAEMON_USER}" = x""; then CRM_DAEMON_USER="hacluster" fi AC_DEFINE_UNQUOTED(CRM_DAEMON_USER,"$CRM_DAEMON_USER", User to run Pacemaker daemons as) AC_SUBST(CRM_DAEMON_USER) if test x"${CRM_DAEMON_GROUP}" = x""; then CRM_DAEMON_GROUP="haclient" fi AC_DEFINE_UNQUOTED(CRM_DAEMON_GROUP,"$CRM_DAEMON_GROUP", Group to run Pacemaker daemons as) AC_SUBST(CRM_DAEMON_GROUP) CRM_PACEMAKER_DIR=${localstatedir}/lib/pacemaker AC_DEFINE_UNQUOTED(CRM_PACEMAKER_DIR,"$CRM_PACEMAKER_DIR", Location to store directory produced by Pacemaker daemons) AC_SUBST(CRM_PACEMAKER_DIR) CRM_BLACKBOX_DIR=${localstatedir}/lib/pacemaker/blackbox AC_DEFINE_UNQUOTED(CRM_BLACKBOX_DIR,"$CRM_BLACKBOX_DIR", Where to keep blackbox dumps) AC_SUBST(CRM_BLACKBOX_DIR) PE_STATE_DIR="${localstatedir}/lib/pacemaker/pengine" AC_DEFINE_UNQUOTED(PE_STATE_DIR,"$PE_STATE_DIR", Where to keep scheduler outputs) AC_SUBST(PE_STATE_DIR) CRM_CONFIG_DIR="${localstatedir}/lib/pacemaker/cib" AC_DEFINE_UNQUOTED(CRM_CONFIG_DIR,"$CRM_CONFIG_DIR", Where to keep configuration files) AC_SUBST(CRM_CONFIG_DIR) CRM_CONFIG_CTS="${localstatedir}/lib/pacemaker/cts" AC_DEFINE_UNQUOTED(CRM_CONFIG_CTS,"$CRM_CONFIG_CTS", Where to keep cts stateful data) AC_SUBST(CRM_CONFIG_CTS) CRM_DAEMON_DIR="${libexecdir}/pacemaker" AC_DEFINE_UNQUOTED(CRM_DAEMON_DIR,"$CRM_DAEMON_DIR", Location for Pacemaker daemons) AC_SUBST(CRM_DAEMON_DIR) CRM_STATE_DIR="${runstatedir}/crm" AC_DEFINE_UNQUOTED([CRM_STATE_DIR], ["$CRM_STATE_DIR"], [Where to keep state files and sockets]) AC_SUBST(CRM_STATE_DIR) CRM_RSCTMP_DIR="${runstatedir}/resource-agents" AC_DEFINE_UNQUOTED(CRM_RSCTMP_DIR,"$CRM_RSCTMP_DIR", Where resource agents should keep state files) AC_SUBST(CRM_RSCTMP_DIR) PACEMAKER_CONFIG_DIR="${sysconfdir}/pacemaker" AC_DEFINE_UNQUOTED(PACEMAKER_CONFIG_DIR,"$PACEMAKER_CONFIG_DIR", Where to keep configuration files like authkey) AC_SUBST(PACEMAKER_CONFIG_DIR) OCF_RA_DIR="$OCF_ROOT_DIR/resource.d" AC_DEFINE_UNQUOTED(OCF_RA_DIR,"$OCF_RA_DIR", Location for OCF RAs) AC_SUBST(OCF_RA_DIR) AC_DEFINE_UNQUOTED(SBIN_DIR,"$sbindir",[Location for system binaries]) AC_PATH_PROGS(GIT, git false) AC_MSG_CHECKING(build version) BUILD_VERSION=$Format:%h$ if test $BUILD_VERSION != ":%h$"; then AC_MSG_RESULT(archive hash: $BUILD_VERSION) elif test -x $GIT -a -d .git; then BUILD_VERSION=`$GIT log --pretty="format:%h" -n 1` AC_MSG_RESULT(git hash: $BUILD_VERSION) else # The current directory name make a reasonable default # Most generated archives will include the hash or tag BASE=`basename $PWD` BUILD_VERSION=`echo $BASE | sed s:.*[[Pp]]acemaker-::` AC_MSG_RESULT(directory based hash: $BUILD_VERSION) fi AC_DEFINE_UNQUOTED(BUILD_VERSION, "$BUILD_VERSION", Build version) AC_SUBST(BUILD_VERSION) HAVE_dbus=1 PKG_CHECK_MODULES([DBUS], [dbus-1], [CPPFLAGS="${CPPFLAGS} ${DBUS_CFLAGS}"], [HAVE_dbus=0]) AC_DEFINE_UNQUOTED(SUPPORT_DBUS, $HAVE_dbus, Support dbus) AM_CONDITIONAL(BUILD_DBUS, test $HAVE_dbus = 1) AC_CHECK_TYPES([DBusBasicValue],,,[[#include ]]) if test $HAVE_dbus = 0; then PC_NAME_DBUS="" else PC_NAME_DBUS="dbus-1" fi AC_SUBST(PC_NAME_DBUS) if test "x${enable_systemd}" != xno; then if test $HAVE_dbus = 0; then if test "x${enable_systemd}" = xyes; then AC_MSG_FAILURE([cannot enable systemd without DBus]) else enable_systemd=no fi fi if test $(echo "$CPPFLAGS" | grep -q PCMK_TIME_EMERGENCY_CGT) \ || test "x$ac_cv_have_decl_CLOCK_MONOTONIC" = xno; then if test "x${enable_systemd}" = xyes; then AC_MSG_FAILURE([cannot enable systemd without clock_gettime(CLOCK_MONOTONIC, ...)]) else enable_systemd=no fi fi if test "x${enable_systemd}" = xtry; then AC_MSG_CHECKING([for systemd version query result via dbus-send]) ret=$({ dbus-send --system --print-reply \ --dest=org.freedesktop.systemd1 \ /org/freedesktop/systemd1 \ org.freedesktop.DBus.Properties.Get \ string:org.freedesktop.systemd1.Manager \ string:Version 2>/dev/null \ || echo "this borked"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) if test "x${ret}" != xborked \ || systemctl --version 2>/dev/null | grep -q systemd; then enable_systemd=yes else enable_systemd=no fi fi fi AC_MSG_CHECKING([whether to enable support for managing resources via systemd]) AC_MSG_RESULT([${enable_systemd}]) HAVE_systemd=0 if test "x${enable_systemd}" = xyes; then HAVE_systemd=1 PCMK_FEATURES="$PCMK_FEATURES systemd" AC_MSG_CHECKING([which system unit file directory to use]) PKG_CHECK_VAR([systemdsystemunitdir], [systemd], [systemdsystemunitdir]) AC_MSG_RESULT([${systemdsystemunitdir}]) if test "x${systemdsystemunitdir}" = x""; then AC_MSG_FAILURE([cannot enable systemd when systemdsystemunitdir unresolved]) fi fi AC_SUBST([systemdsystemunitdir]) AC_DEFINE_UNQUOTED(SUPPORT_SYSTEMD, $HAVE_systemd, Support systemd based system services) AM_CONDITIONAL(BUILD_SYSTEMD, test $HAVE_systemd = 1) AC_SUBST(SUPPORT_SYSTEMD) if test "x${enable_upstart}" != xno; then if test $HAVE_dbus = 0; then if test "x${enable_upstart}" = xyes; then AC_MSG_FAILURE([cannot enable Upstart without DBus]) else enable_upstart=no fi fi if test "x${enable_upstart}" = xtry; then AC_MSG_CHECKING([for Upstart version query result via dbus-send]) ret=$({ dbus-send --system --print-reply --dest=com.ubuntu.Upstart \ /com/ubuntu/Upstart org.freedesktop.DBus.Properties.Get \ string:com.ubuntu.Upstart0_6 string:version 2>/dev/null \ || echo "this borked"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) if test "x${ret}" != xborked \ || initctl --version 2>/dev/null | grep -q upstart; then enable_upstart=yes else enable_upstart=no fi fi fi AC_MSG_CHECKING([whether to enable support for managing resources via Upstart]) AC_MSG_RESULT([${enable_upstart}]) HAVE_upstart=0 if test "x${enable_upstart}" = xyes; then HAVE_upstart=1 PCMK_FEATURES="$PCMK_FEATURES upstart" fi AC_DEFINE_UNQUOTED(SUPPORT_UPSTART, $HAVE_upstart, Support upstart based system services) AM_CONDITIONAL(BUILD_UPSTART, test $HAVE_upstart = 1) AC_SUBST(SUPPORT_UPSTART) case $SUPPORT_NAGIOS in 1|yes|true) if test $(echo "CPPFLAGS" | grep -q PCMK_TIME_EMERGENCY_CGT) \ || test "x$ac_cv_have_decl_CLOCK_MONOTONIC" = xno; then AC_MSG_FAILURE([cannot enable nagios without clock_gettime(CLOCK_MONOTONIC, ...)]) fi SUPPORT_NAGIOS=1 ;; try) if test $(echo "CPPFLAGS" | grep -q PCMK_TIME_EMERGENCY_CGT) \ || test "x$ac_cv_have_decl_CLOCK_MONOTONIC" = xno; then SUPPORT_NAGIOS=0 else SUPPORT_NAGIOS=1 fi ;; *) SUPPORT_NAGIOS=0 ;; esac if test $SUPPORT_NAGIOS = 1; then PCMK_FEATURES="$PCMK_FEATURES nagios" fi AC_DEFINE_UNQUOTED(SUPPORT_NAGIOS, $SUPPORT_NAGIOS, Support nagios plugins) AM_CONDITIONAL(BUILD_NAGIOS, test $SUPPORT_NAGIOS = 1) if test x"$NAGIOS_PLUGIN_DIR" = x""; then NAGIOS_PLUGIN_DIR="${libexecdir}/nagios/plugins" fi AC_DEFINE_UNQUOTED(NAGIOS_PLUGIN_DIR, "$NAGIOS_PLUGIN_DIR", Directory for nagios plugins) AC_SUBST(NAGIOS_PLUGIN_DIR) if test x"$NAGIOS_METADATA_DIR" = x""; then NAGIOS_METADATA_DIR="${datadir}/nagios/plugins-metadata" fi AC_DEFINE_UNQUOTED(NAGIOS_METADATA_DIR, "$NAGIOS_METADATA_DIR", Directory for nagios plugins metadata) AC_SUBST(NAGIOS_METADATA_DIR) STACKS="" CLUSTERLIBS="" PC_NAME_CLUSTER="" dnl ======================================================================== dnl Cluster stack - Corosync dnl ======================================================================== dnl Normalize the values case $SUPPORT_CS in 1|yes|true) SUPPORT_CS=yes missingisfatal=1 ;; try) missingisfatal=0 ;; *) SUPPORT_CS=no ;; esac AC_MSG_CHECKING(for native corosync) COROSYNC_LIBS="" if test $SUPPORT_CS = no; then AC_MSG_RESULT(no (disabled)) SUPPORT_CS=0 else AC_MSG_RESULT($SUPPORT_CS) SUPPORT_CS=1 PKG_CHECK_MODULES(cpg, libcpg) dnl Fatal PKG_CHECK_MODULES(cfg, libcfg) dnl Fatal PKG_CHECK_MODULES(cmap, libcmap) dnl Fatal PKG_CHECK_MODULES(quorum, libquorum) dnl Fatal PKG_CHECK_MODULES(libcorosync_common, libcorosync_common) dnl Fatal CFLAGS="$CFLAGS $libqb_CFLAGS $cpg_CFLAGS $cfg_CFLAGS $cmap_CFLAGS $quorum_CFLAGS $libcorosync_common_CFLAGS" COROSYNC_LIBS="$COROSYNC_LIBS $cpg_LIBS $cfg_LIBS $cmap_LIBS $quorum_LIBS $libcorosync_common_LIBS" CLUSTERLIBS="$CLUSTERLIBS $COROSYNC_LIBS" PC_NAME_CLUSTER="$PC_CLUSTER_NAME libcfg libcmap libcorosync_common libcpg libquorum" STACKS="$STACKS corosync-native" fi AC_DEFINE_UNQUOTED(SUPPORT_COROSYNC, $SUPPORT_CS, Support the Corosync messaging and membership layer) AM_CONDITIONAL(BUILD_CS_SUPPORT, test $SUPPORT_CS = 1) AC_SUBST(SUPPORT_COROSYNC) dnl dnl Cluster stack - Sanity dnl -if test x${enable_no_stack} = xyes; then - AC_MSG_NOTICE(No cluster stack supported, building only the scheduler) - PCMK_FEATURES="$PCMK_FEATURES no-cluster-stack" -else - AC_MSG_CHECKING(for supported stacks) - if test x"$STACKS" = x; then - AC_MSG_FAILURE(You must support at least one cluster stack) - fi - AC_MSG_RESULT($STACKS) - PCMK_FEATURES="$PCMK_FEATURES $STACKS" +AC_MSG_CHECKING(for supported stacks) +if test x"$STACKS" = x; then + AC_MSG_FAILURE(You must support at least one cluster stack) fi +AC_MSG_RESULT($STACKS) +PCMK_FEATURES="$PCMK_FEATURES $STACKS" PCMK_FEATURES="$PCMK_FEATURES atomic-attrd" AC_SUBST(CLUSTERLIBS) AC_SUBST(PC_NAME_CLUSTER) dnl ======================================================================== dnl ACL dnl ======================================================================== case $SUPPORT_ACL in 1|yes|true|try) SUPPORT_ACL=1 PCMK_FEATURES="$PCMK_FEATURES acls" ;; *) SUPPORT_ACL=0 ;; esac AM_CONDITIONAL(ENABLE_ACL, test "$SUPPORT_ACL" = "1") AC_DEFINE_UNQUOTED(ENABLE_ACL, $SUPPORT_ACL, Build in support for CIB ACL) dnl ======================================================================== dnl CIB secrets dnl ======================================================================== case $SUPPORT_CIBSECRETS in 1|yes|true|try) SUPPORT_CIBSECRETS=1 ;; *) SUPPORT_CIBSECRETS=0 ;; esac AC_DEFINE_UNQUOTED(SUPPORT_CIBSECRETS, $SUPPORT_CIBSECRETS, Support CIB secrets) AM_CONDITIONAL(BUILD_CIBSECRETS, test $SUPPORT_CIBSECRETS = 1) if test $SUPPORT_CIBSECRETS = 1; then PCMK_FEATURES="$PCMK_FEATURES cibsecrets" LRM_CIBSECRETS_DIR="${localstatedir}/lib/pacemaker/lrm/secrets" AC_DEFINE_UNQUOTED(LRM_CIBSECRETS_DIR,"$LRM_CIBSECRETS_DIR", Location for CIB secrets) AC_SUBST(LRM_CIBSECRETS_DIR) fi dnl ======================================================================== dnl GnuTLS dnl ======================================================================== dnl Require GnuTLS >=2.12.0 (2011-03) to support Pacemaker Remote AC_CHECK_LIB(gnutls, gnutls_sec_param_to_pk_bits) if test "$ac_cv_lib_gnutls_gnutls_sec_param_to_pk_bits" != ""; then AC_CHECK_HEADERS(gnutls/gnutls.h, [PC_NAME_GNUTLS="gnutls"], [PC_NAME_GNUTLS=""]) AC_SUBST(PC_NAME_GNUTLS) fi dnl ======================================================================== dnl PAM dnl ======================================================================== AC_CHECK_HEADERS(security/pam_appl.h pam/pam_appl.h) dnl ======================================================================== dnl System Health dnl ======================================================================== dnl Check if servicelog development package is installed SERVICELOG=servicelog-1 SERVICELOG_EXISTS="no" AC_MSG_CHECKING(for $SERVICELOG packages) if $PKG_CONFIG --exists $SERVICELOG then PKG_CHECK_MODULES([SERVICELOG], [servicelog-1]) SERVICELOG_EXISTS="yes" fi AC_MSG_RESULT($SERVICELOG_EXISTS) AM_CONDITIONAL(BUILD_SERVICELOG, test "$SERVICELOG_EXISTS" = "yes") dnl Check if OpenIMPI packages and servicelog are installed OPENIPMI="OpenIPMI OpenIPMIposix" OPENIPMI_SERVICELOG_EXISTS="no" AC_MSG_CHECKING(for $SERVICELOG $OPENIPMI packages) if $PKG_CONFIG --exists $OPENIPMI $SERVICELOG then PKG_CHECK_MODULES([OPENIPMI_SERVICELOG],[OpenIPMI OpenIPMIposix]) OPENIPMI_SERVICELOG_EXISTS="yes" fi AC_MSG_RESULT($OPENIPMI_SERVICELOG_EXISTS) AM_CONDITIONAL(BUILD_OPENIPMI_SERVICELOG, test "$OPENIPMI_SERVICELOG_EXISTS" = "yes") # --- ASAN/UBSAN/TSAN (see man gcc) --- # when using SANitizers, we need to pass the -fsanitize.. # to both CFLAGS and LDFLAGS. The CFLAGS/LDFLAGS must be # specified as first in the list or there will be runtime # issues (for example user has to LD_PRELOAD asan for it to work # properly). if test -n "${SANITIZERS}"; then SANITIZERS=$(echo $SANITIZERS | sed -e 's/,/ /g') for SANITIZER in $SANITIZERS; do case $SANITIZER in asan|ASAN) SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=address" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=address -lasan" AC_CHECK_LIB([asan],[main],,AC_MSG_ERROR([Unable to find libasan])) ;; ubsan|UBSAN) SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=undefined" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=undefined -lubsan" AC_CHECK_LIB([ubsan],[main],,AC_MSG_ERROR([Unable to find libubsan])) ;; tsan|TSAN) SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=thread" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=thread -ltsan" AC_CHECK_LIB([tsan],[main],,AC_MSG_ERROR([Unable to find libtsan])) ;; esac done fi dnl ======================================================================== dnl Compiler flags dnl ======================================================================== dnl Make sure that CFLAGS is not exported. If the user did dnl not have CFLAGS in their environment then this should have dnl no effect. However if CFLAGS was exported from the user's dnl environment, then the new CFLAGS will also be exported dnl to sub processes. if export | fgrep " CFLAGS=" > /dev/null; then SAVED_CFLAGS="$CFLAGS" unset CFLAGS CFLAGS="$SAVED_CFLAGS" unset SAVED_CFLAGS fi AC_ARG_VAR([CFLAGS_HARDENED_LIB], [extra C compiler flags for hardened libraries]) AC_ARG_VAR([LDFLAGS_HARDENED_LIB], [extra linker flags for hardened libraries]) AC_ARG_VAR([CFLAGS_HARDENED_EXE], [extra C compiler flags for hardened executables]) AC_ARG_VAR([LDFLAGS_HARDENED_EXE], [extra linker flags for hardened executables]) CC_EXTRAS="" if test "$GCC" != yes; then CFLAGS="$CFLAGS -g" else CFLAGS="$CFLAGS -ggdb" dnl When we don't have diagnostic push / pull, we can't explicitly disable dnl checking for nonliteral formats in the places where they occur on purpose dnl thus we disable nonliteral format checking globally as we are aborting dnl on warnings. dnl what makes the things really ugly is that nonliteral format checking is dnl obviously available as an extra switch in very modern gcc but for older dnl gcc this is part of -Wformat=2 dnl so if we have push/pull we can enable -Wformat=2 -Wformat-nonliteral dnl if we don't have push/pull but -Wformat-nonliteral we can enable -Wformat=2 dnl otherwise none of both gcc_diagnostic_push_pull=no cc_temp_flags "$CFLAGS $WERROR" AC_MSG_CHECKING([for gcc diagnostic push / pull]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #pragma GCC diagnostic push #pragma GCC diagnostic pop ]])], [ AC_MSG_RESULT([yes]) gcc_diagnostic_push_pull=yes ], AC_MSG_RESULT([no])) cc_restore_flags if cc_supports_flag "-Wformat-nonliteral"; then gcc_format_nonliteral=yes else gcc_format_nonliteral=no fi # We had to eliminate -Wnested-externs because of libtool changes # Make sure to order options so that the former stand for prerequisites # of the latter (e.g., -Wformat-nonliteral requires -Wformat). EXTRA_FLAGS="-fgnu89-inline -Wall -Waggregate-return -Wbad-function-cast -Wcast-align -Wdeclaration-after-statement -Wendif-labels -Wfloat-equal -Wformat-security -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wno-long-long -Wno-strict-aliasing -Wpointer-arith -Wstrict-prototypes -Wwrite-strings -Wunused-but-set-variable -Wunsigned-char" if test "x$gcc_diagnostic_push_pull" = "xyes"; then AC_DEFINE([GCC_FORMAT_NONLITERAL_CHECKING_ENABLED], [], [gcc can complain about nonliterals in format]) EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2 -Wformat-nonliteral" else if test "x$gcc_format_nonliteral" = "xyes"; then EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2" fi fi # Additional warnings it might be nice to enable one day # -Wshadow # -Wunreachable-code for j in $EXTRA_FLAGS do if cc_supports_flag $CC_EXTRAS $j then CC_EXTRAS="$CC_EXTRAS $j" fi done - if test "x${enable_ansi}" = xyes && cc_supports_flag -std=iso9899:199409 ; then - AC_MSG_NOTICE(Enabling ANSI Compatibility) - CC_EXTRAS="$CC_EXTRAS -ansi -D_GNU_SOURCE -DANSI_ONLY" - fi - AC_MSG_NOTICE(Activated additional gcc flags: ${CC_EXTRAS}) fi dnl dnl Hardening flags dnl dnl The prime control of whether to apply (targeted) hardening build flags and dnl which ones is --{enable,disable}-hardening option passed to ./configure: dnl dnl --enable-hardening=try (default): dnl depending on whether any of CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE, dnl CFLAGS_HARDENED_LIB or LDFLAGS_HARDENED_LIB environment variables dnl (see below) is set and non-null, all these custom flags (even if not dnl set) are used as are, otherwise the best effort is made to offer dnl reasonably strong hardening in several categories (RELRO, PIE, dnl "bind now", stack protector) according to what the selected toolchain dnl can offer dnl dnl --enable-hardening: dnl same effect as --enable-hardening=try when the environment variables dnl in question are suppressed dnl dnl --disable-hardening: dnl do not apply any targeted hardening measures at all dnl dnl The user-injected environment variables that regulate the hardening in dnl default case are as follows: dnl dnl * CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE dnl compiler and linker flags (respectively) for daemon programs dnl (pacemakerd, pacemaker-attrd, pacemaker-controld, pacemaker-execd, dnl cib, stonithd, pacemaker-remoted, pacemaker-schedulerd) dnl dnl * CFLAGS_HARDENED_LIB, LDFLAGS_HARDENED_LIB dnl compiler and linker flags (respectively) for libraries linked dnl with the daemon programs dnl dnl Note that these are purposedly targeted variables (addressing particular dnl targets all over the scattered Makefiles) and have no effect outside of dnl the predestined scope (e.g., CLI utilities). For a global reach, dnl use CFLAGS, LDFLAGS, etc. as usual. dnl dnl For guidance on the suitable flags consult, for instance: dnl https://fedoraproject.org/wiki/Changes/Harden_All_Packages#Detailed_Harden_Flags_Description dnl https://owasp.org/index.php/C-Based_Toolchain_Hardening#GCC.2FBinutils dnl if test "x${HARDENING}" != "xtry"; then unset CFLAGS_HARDENED_EXE unset CFLAGS_HARDENED_LIB unset LDFLAGS_HARDENED_EXE unset LDFLAGS_HARDENED_LIB fi if test "x${HARDENING}" = "xno"; then AC_MSG_NOTICE([Hardening: explicitly disabled]) elif test "x${HARDENING}" = "xyes" \ || test "$(env | grep -Ec '^(C|LD)FLAGS_HARDENED_(EXE|LIB)=.')" = 0; then dnl We'll figure out on our own... CFLAGS_HARDENED_EXE= CFLAGS_HARDENED_LIB= LDFLAGS_HARDENED_EXE= LDFLAGS_HARDENED_LIB= relro=0 pie=0 bindnow=0 # daemons incl. libs: partial RELRO flag="-Wl,-z,relro" CC_CHECK_LDFLAGS(["${flag}"], [LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}"; relro=1]) # daemons: PIE for both CFLAGS and LDFLAGS if cc_supports_flag -fPIE; then flag="-pie" CC_CHECK_LDFLAGS(["${flag}"], [CFLAGS_HARDENED_EXE="${CFLAGS_HARDENED_EXE} -fPIE"; LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; pie=1]) fi # daemons incl. libs: full RELRO if sensible + as-needed linking # so as to possibly mitigate startup performance # hit caused by excessive linking with unneeded # libraries if test "${relro}" = 1 && test "${pie}" = 1; then flag="-Wl,-z,now" CC_CHECK_LDFLAGS(["${flag}"], [LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}"; bindnow=1]) fi if test "${bindnow}" = 1; then flag="-Wl,--as-needed" CC_CHECK_LDFLAGS(["${flag}"], [LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}"]) fi # universal: prefer strong > all > default stack protector if possible flag= if cc_supports_flag -fstack-protector-strong; then flag="-fstack-protector-strong" elif cc_supports_flag -fstack-protector-all; then flag="-fstack-protector-all" elif cc_supports_flag -fstack-protector; then flag="-fstack-protector" fi if test -n "${flag}"; then CC_EXTRAS="${CC_EXTRAS} ${flag}" stackprot=1 fi if test "${relro}" = 1 \ || test "${pie}" = 1 \ || test "${stackprot}" = 1; then AC_MSG_NOTICE([Hardening: relro=${relro} pie=${pie} bindnow=${bindnow} stackprot=${flag}]) else AC_MSG_WARN([Hardening: no suitable features in the toolchain detected]) fi else AC_MSG_NOTICE([Hardening: using custom flags]) fi CFLAGS="$SANITIZERS_CFLAGS $CFLAGS $CC_EXTRAS" LDFLAGS="$SANITIZERS_LDFLAGS $LDFLAGS" CFLAGS_HARDENED_EXE="$SANITIZERS_CFLAGS $CFLAGS_HARDENED_EXE" LDFLAGS_HARDENED_EXE="$SANITIZERS_LDFLAGS $LDFLAGS_HARDENED_EXE" NON_FATAL_CFLAGS="$CFLAGS" AC_SUBST(NON_FATAL_CFLAGS) dnl dnl We reset CFLAGS to include our warnings *after* all function dnl checking goes on, so that our warning flags don't keep the dnl AC_*FUNCS() calls above from working. In particular, -Werror will dnl *always* cause us troubles if we set it before here. dnl dnl if test "x${enable_fatal_warnings}" = xyes ; then AC_MSG_NOTICE(Enabling Fatal Warnings) CFLAGS="$CFLAGS $WERROR" fi AC_SUBST(CFLAGS) dnl This is useful for use in Makefiles that need to remove one specific flag CFLAGS_COPY="$CFLAGS" AC_SUBST(CFLAGS_COPY) AC_SUBST(LIBADD_DL) dnl extra flags for dynamic linking libraries AC_SUBST(LOCALE) dnl Options for cleaning up the compiler output QUIET_LIBTOOL_OPTS="" QUIET_MAKE_OPTS="" if test "x${enable_quiet}" = "xyes"; then QUIET_LIBTOOL_OPTS="--silent" QUIET_MAKE_OPTS="-s" # POSIX compliant fi AC_MSG_RESULT(Suppress make details: ${enable_quiet}) dnl Put the above variables to use LIBTOOL="${LIBTOOL} --tag=CC \$(QUIET_LIBTOOL_OPTS)" MAKEFLAGS="${MAKEFLAGS} ${QUIET_MAKE_OPTS}" AC_SUBST(CC) AC_SUBST(MAKEFLAGS) AC_SUBST(LIBTOOL) AC_SUBST(QUIET_LIBTOOL_OPTS) AC_DEFINE_UNQUOTED(CRM_FEATURES, "$PCMK_FEATURES", Set of enabled features) AC_SUBST(PCMK_FEATURES) dnl Files we output that need to be executable AC_CONFIG_FILES([cts/CTSlab.py], [chmod +x cts/CTSlab.py]) AC_CONFIG_FILES([cts/LSBDummy], [chmod +x cts/LSBDummy]) AC_CONFIG_FILES([cts/OCFIPraTest.py], [chmod +x cts/OCFIPraTest.py]) AC_CONFIG_FILES([cts/cluster_test], [chmod +x cts/cluster_test]) AC_CONFIG_FILES([cts/cts], [chmod +x cts/cts]) AC_CONFIG_FILES([cts/cts-cli], [chmod +x cts/cts-cli]) AC_CONFIG_FILES([cts/cts-coverage], [chmod +x cts/cts-coverage]) AC_CONFIG_FILES([cts/cts-exec], [chmod +x cts/cts-exec]) AC_CONFIG_FILES([cts/cts-fencing], [chmod +x cts/cts-fencing]) AC_CONFIG_FILES([cts/cts-log-watcher], [chmod +x cts/cts-log-watcher]) AC_CONFIG_FILES([cts/cts-regression], [chmod +x cts/cts-regression]) AC_CONFIG_FILES([cts/cts-scheduler], [chmod +x cts/cts-scheduler]) AC_CONFIG_FILES([cts/cts-support], [chmod +x cts/cts-support]) AC_CONFIG_FILES([cts/lxc_autogen.sh], [chmod +x cts/lxc_autogen.sh]) AC_CONFIG_FILES([cts/benchmark/clubench], [chmod +x cts/benchmark/clubench]) AC_CONFIG_FILES([cts/fence_dummy], [chmod +x cts/fence_dummy]) AC_CONFIG_FILES([cts/pacemaker-cts-dummyd], [chmod +x cts/pacemaker-cts-dummyd]) AC_CONFIG_FILES([daemons/fenced/fence_legacy], [chmod +x daemons/fenced/fence_legacy]) AC_CONFIG_FILES([doc/abi-check], [chmod +x doc/abi-check]) AC_CONFIG_FILES([extra/resources/ClusterMon], [chmod +x extra/resources/ClusterMon]) AC_CONFIG_FILES([extra/resources/HealthSMART], [chmod +x extra/resources/HealthSMART]) AC_CONFIG_FILES([extra/resources/SysInfo], [chmod +x extra/resources/SysInfo]) AC_CONFIG_FILES([extra/resources/ifspeed], [chmod +x extra/resources/ifspeed]) AC_CONFIG_FILES([extra/resources/o2cb], [chmod +x extra/resources/o2cb]) AC_CONFIG_FILES([tools/crm_failcount], [chmod +x tools/crm_failcount]) AC_CONFIG_FILES([tools/crm_master], [chmod +x tools/crm_master]) AC_CONFIG_FILES([tools/crm_report], [chmod +x tools/crm_report]) AC_CONFIG_FILES([tools/crm_standby], [chmod +x tools/crm_standby]) AC_CONFIG_FILES([tools/cibsecret], [chmod +x tools/cibsecret]) AC_CONFIG_FILES([tools/pcmk_simtimes], [chmod +x tools/pcmk_simtimes]) dnl Other files we output AC_CONFIG_FILES(Makefile \ cts/Makefile \ cts/CTS.py \ cts/CTSvars.py \ cts/benchmark/Makefile \ cts/pacemaker-cts-dummyd@.service \ daemons/Makefile \ daemons/attrd/Makefile \ daemons/based/Makefile \ daemons/controld/Makefile \ daemons/execd/Makefile \ daemons/execd/pacemaker_remote \ daemons/execd/pacemaker_remote.service \ daemons/fenced/Makefile \ daemons/pacemakerd/Makefile \ daemons/pacemakerd/pacemaker \ daemons/pacemakerd/pacemaker.service \ daemons/pacemakerd/pacemaker.upstart \ daemons/pacemakerd/pacemaker.combined.upstart \ daemons/schedulerd/Makefile \ devel/Makefile \ doc/Doxyfile \ doc/Makefile \ doc/sphinx/Makefile \ extra/Makefile \ extra/alerts/Makefile \ extra/resources/Makefile \ extra/logrotate/Makefile \ extra/logrotate/pacemaker \ include/Makefile \ include/crm/Makefile \ include/crm/cib/Makefile \ include/crm/common/Makefile \ include/crm/cluster/Makefile \ include/crm/fencing/Makefile \ include/crm/pengine/Makefile \ include/pcmki/Makefile \ replace/Makefile \ lib/Makefile \ lib/libpacemaker.pc \ lib/pacemaker.pc \ lib/pacemaker-cib.pc \ lib/pacemaker-lrmd.pc \ lib/pacemaker-service.pc \ lib/pacemaker-pe_rules.pc \ lib/pacemaker-pe_status.pc \ lib/pacemaker-fencing.pc \ lib/pacemaker-cluster.pc \ lib/common/Makefile \ lib/common/tests/Makefile \ lib/common/tests/agents/Makefile \ lib/common/tests/cmdline/Makefile \ lib/common/tests/flags/Makefile \ lib/common/tests/operations/Makefile \ lib/common/tests/strings/Makefile \ lib/common/tests/utils/Makefile \ lib/cluster/Makefile \ lib/cib/Makefile \ lib/gnu/Makefile \ lib/pacemaker/Makefile \ lib/pengine/Makefile \ lib/pengine/tests/Makefile \ lib/pengine/tests/rules/Makefile \ lib/fencing/Makefile \ lib/lrmd/Makefile \ lib/services/Makefile \ maint/Makefile \ tests/Makefile \ tools/Makefile \ tools/report.collector \ tools/report.common \ tools/crm_mon.service \ tools/crm_mon.upstart \ xml/Makefile \ xml/pacemaker-schemas.pc \ ) dnl Now process the entire list of files added by previous dnl calls to AC_CONFIG_FILES() AC_OUTPUT() dnl ***************** dnl Configure summary dnl ***************** AC_MSG_RESULT([]) AC_MSG_RESULT([$PACKAGE configuration:]) AC_MSG_RESULT([ Version = ${VERSION} (Build: $BUILD_VERSION)]) AC_MSG_RESULT([ Features =${PCMK_FEATURES}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ Prefix = ${prefix}]) AC_MSG_RESULT([ Executables = ${sbindir}]) AC_MSG_RESULT([ Man pages = ${mandir}]) AC_MSG_RESULT([ Libraries = ${libdir}]) AC_MSG_RESULT([ Header files = ${includedir}]) AC_MSG_RESULT([ Arch-independent files = ${datadir}]) AC_MSG_RESULT([ State information = ${localstatedir}]) AC_MSG_RESULT([ System configuration = ${sysconfdir}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ HA group name = ${CRM_DAEMON_GROUP}]) AC_MSG_RESULT([ HA user name = ${CRM_DAEMON_USER}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ CFLAGS = ${CFLAGS}]) AC_MSG_RESULT([ CFLAGS_HARDENED_EXE = ${CFLAGS_HARDENED_EXE}]) AC_MSG_RESULT([ CFLAGS_HARDENED_LIB = ${CFLAGS_HARDENED_LIB}]) AC_MSG_RESULT([ LDFLAGS_HARDENED_EXE = ${LDFLAGS_HARDENED_EXE}]) AC_MSG_RESULT([ LDFLAGS_HARDENED_LIB = ${LDFLAGS_HARDENED_LIB}]) AC_MSG_RESULT([ Libraries = ${LIBS}]) AC_MSG_RESULT([ Stack Libraries = ${CLUSTERLIBS}]) AC_MSG_RESULT([ Unix socket auth method = ${us_auth}]) diff --git a/lib/common/strings.c b/lib/common/strings.c index 4be151d6a4..21b4130771 100644 --- a/lib/common/strings.c +++ b/lib/common/strings.c @@ -1,1115 +1,1111 @@ /* * Copyright 2004-2020 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU Lesser General Public License * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. */ #include #ifndef _GNU_SOURCE # define _GNU_SOURCE #endif #include #include #include #include #include #include // DBL_MIN #include #include // fabs() #include #include char * crm_itoa_stack(int an_int, char *buffer, size_t len) { if (buffer != NULL) { snprintf(buffer, len, "%d", an_int); } return buffer; } /*! * \internal * \brief Scan a long long integer from a string * * \param[in] text String to scan * \param[out] result If not NULL, where to store scanned value * \param[out] end_text If not NULL, where to store pointer to just after value * * \return Standard Pacemaker return code (\c pcmk_rc_ok on success, * \c EINVAL on failed string conversion due to invalid input, * or \c EOVERFLOW on arithmetic overflow) * \note Sets \c errno on error */ static int scan_ll(const char *text, long long *result, char **end_text) { long long local_result = PCMK__PARSE_INT_DEFAULT; char *local_end_text = NULL; int rc = pcmk_rc_ok; errno = 0; if (text != NULL) { -#ifdef ANSI_ONLY - local_result = (long long) strtol(text, &local_end_text, 10); -#else local_result = strtoll(text, &local_end_text, 10); -#endif if (errno == ERANGE) { rc = EOVERFLOW; crm_warn("Integer parsed from %s was clipped to %lld", text, local_result); } else if (errno != 0) { rc = errno; local_result = PCMK__PARSE_INT_DEFAULT; crm_warn("Could not parse integer from %s (using %d instead): %s", text, PCMK__PARSE_INT_DEFAULT, pcmk_rc_str(rc)); } else if (local_end_text == text) { rc = EINVAL; local_result = PCMK__PARSE_INT_DEFAULT; crm_warn("Could not parse integer from %s (using %d instead): " "No digits found", text, PCMK__PARSE_INT_DEFAULT); } if ((end_text == NULL) && !pcmk__str_empty(local_end_text)) { crm_warn("Characters left over after parsing '%s': '%s'", text, local_end_text); } errno = rc; } if (end_text != NULL) { *end_text = local_end_text; } if (result != NULL) { *result = local_result; } return rc; } /*! * \brief Parse a long long integer value from a string * * \param[in] text The string to parse * \param[in] default_text Default string to parse if text is NULL * * \return Parsed value on success, PCMK__PARSE_INT_DEFAULT (and set * errno) on error */ long long crm_parse_ll(const char *text, const char *default_text) { long long result; if (text == NULL) { text = default_text; if (text == NULL) { crm_err("No default conversion value supplied"); errno = EINVAL; return PCMK__PARSE_INT_DEFAULT; } } scan_ll(text, &result, NULL); return result; } /*! * \brief Parse an integer value from a string * * \param[in] text The string to parse * \param[in] default_text Default string to parse if text is NULL * * \return Parsed value on success, INT_MIN or INT_MAX (and set errno to * ERANGE) if parsed value is out of integer range, otherwise * PCMK__PARSE_INT_DEFAULT (and set errno) */ int crm_parse_int(const char *text, const char *default_text) { long long result = crm_parse_ll(text, default_text); if (result < INT_MIN) { // If errno is ERANGE, crm_parse_ll() has already logged a message if (errno != ERANGE) { crm_err("Conversion of %s was clipped: %lld", text, result); errno = ERANGE; } return INT_MIN; } else if (result > INT_MAX) { // If errno is ERANGE, crm_parse_ll() has already logged a message if (errno != ERANGE) { crm_err("Conversion of %s was clipped: %lld", text, result); errno = ERANGE; } return INT_MAX; } return (int) result; } /*! * \internal * \brief Scan a double-precision floating-point value from a string * * \param[in] text The string to parse * \param[out] result Parsed value on success, or * \c PCMK__PARSE_DBL_DEFAULT on error * \param[in] default_text Default string to parse if \p text is * \c NULL * \param[out] end_text If not \c NULL, where to store a pointer * to the position immediately after the * value * * \return Standard Pacemaker return code (\c pcmk_rc_ok on success, * \c EINVAL on failed string conversion due to invalid input, * \c EOVERFLOW on arithmetic overflow, \c pcmk_rc_underflow * on arithmetic underflow, or \c errno from \c strtod() on * other parse errors) */ int pcmk__scan_double(const char *text, double *result, const char *default_text, char **end_text) { int rc = pcmk_rc_ok; char *local_end_text = NULL; CRM_ASSERT(result != NULL); *result = PCMK__PARSE_DBL_DEFAULT; text = (text != NULL) ? text : default_text; if (text == NULL) { rc = EINVAL; crm_debug("No text and no default conversion value supplied"); } else { errno = 0; *result = strtod(text, &local_end_text); if (errno == ERANGE) { /* * Overflow: strtod() returns +/- HUGE_VAL and sets errno to * ERANGE * * Underflow: strtod() returns "a value whose magnitude is * no greater than the smallest normalized * positive" double. Whether ERANGE is set is * implementation-defined. */ const char *over_under; if (fabs(*result) > DBL_MIN) { rc = EOVERFLOW; over_under = "over"; } else { rc = pcmk_rc_underflow; over_under = "under"; } crm_debug("Floating-point value parsed from '%s' would %sflow " "(using %g instead)", text, over_under, *result); } else if (errno != 0) { rc = errno; // strtod() set *result = 0 on parse failure *result = PCMK__PARSE_DBL_DEFAULT; crm_debug("Could not parse floating-point value from '%s' (using " "%.1f instead): %s", text, PCMK__PARSE_DBL_DEFAULT, pcmk_rc_str(rc)); } else if (local_end_text == text) { // errno == 0, but nothing was parsed rc = EINVAL; *result = PCMK__PARSE_DBL_DEFAULT; crm_debug("Could not parse floating-point value from '%s' (using " "%.1f instead): No digits found", text, PCMK__PARSE_DBL_DEFAULT); } else if (fabs(*result) <= DBL_MIN) { /* * errno == 0 and text was parsed, but value might have * underflowed. * * ERANGE might not be set for underflow. Check magnitude * of *result, but also make sure the input number is not * actually zero (0 <= DBL_MIN is not underflow). * * This check must come last. A parse failure in strtod() * also sets *result == 0, so a parse failure would match * this test condition prematurely. */ for (const char *p = text; p != local_end_text; p++) { if (strchr("0.eE", *p) == NULL) { rc = pcmk_rc_underflow; crm_debug("Floating-point value parsed from '%s' would " "underflow (using %g instead)", text, *result); break; } } } else { crm_trace("Floating-point value parsed successfully from " "'%s': %g", text, *result); } if ((end_text == NULL) && !pcmk__str_empty(local_end_text)) { crm_debug("Characters left over after parsing '%s': '%s'", text, local_end_text); } } if (end_text != NULL) { *end_text = local_end_text; } return rc; } /*! * \internal * \brief Parse a guint from a string stored in a hash table * * \param[in] table Hash table to search * \param[in] key Hash table key to use to retrieve string * \param[in] default_val What to use if key has no entry in table * \param[out] result If not NULL, where to store parsed integer * * \return Standard Pacemaker return code */ int pcmk__guint_from_hash(GHashTable *table, const char *key, guint default_val, guint *result) { const char *value; long long value_ll; CRM_CHECK((table != NULL) && (key != NULL), return EINVAL); value = g_hash_table_lookup(table, key); if (value == NULL) { if (result != NULL) { *result = default_val; } return pcmk_rc_ok; } errno = 0; value_ll = crm_parse_ll(value, NULL); if (errno != 0) { return errno; // Message already logged } if ((value_ll < 0) || (value_ll > G_MAXUINT)) { crm_warn("Could not parse non-negative integer from %s", value); return ERANGE; } if (result != NULL) { *result = (guint) value_ll; } return pcmk_rc_ok; } #ifndef NUMCHARS # define NUMCHARS "0123456789." #endif #ifndef WHITESPACE # define WHITESPACE " \t\n\r\f" #endif /*! * \brief Parse a time+units string and return milliseconds equivalent * * \param[in] input String with a number and units (optionally with whitespace * before and/or after the number) * * \return Milliseconds corresponding to string expression, or * PCMK__PARSE_INT_DEFAULT on error */ long long crm_get_msec(const char *input) { const char *num_start = NULL; const char *units; long long multiplier = 1000; long long divisor = 1; long long msec = PCMK__PARSE_INT_DEFAULT; size_t num_len = 0; char *end_text = NULL; if (input == NULL) { return PCMK__PARSE_INT_DEFAULT; } num_start = input + strspn(input, WHITESPACE); num_len = strspn(num_start, NUMCHARS); if (num_len < 1) { return PCMK__PARSE_INT_DEFAULT; } units = num_start + num_len; units += strspn(units, WHITESPACE); if (!strncasecmp(units, "ms", 2) || !strncasecmp(units, "msec", 4)) { multiplier = 1; divisor = 1; } else if (!strncasecmp(units, "us", 2) || !strncasecmp(units, "usec", 4)) { multiplier = 1; divisor = 1000; } else if (!strncasecmp(units, "s", 1) || !strncasecmp(units, "sec", 3)) { multiplier = 1000; divisor = 1; } else if (!strncasecmp(units, "m", 1) || !strncasecmp(units, "min", 3)) { multiplier = 60 * 1000; divisor = 1; } else if (!strncasecmp(units, "h", 1) || !strncasecmp(units, "hr", 2)) { multiplier = 60 * 60 * 1000; divisor = 1; } else if ((*units != EOS) && (*units != '\n') && (*units != '\r')) { return PCMK__PARSE_INT_DEFAULT; } scan_ll(num_start, &msec, &end_text); if (msec > (LLONG_MAX / multiplier)) { // Arithmetics overflow while multiplier/divisor mutually exclusive return LLONG_MAX; } msec *= multiplier; msec /= divisor; return msec; } gboolean crm_is_true(const char *s) { gboolean ret = FALSE; if (s != NULL) { crm_str_to_boolean(s, &ret); } return ret; } int crm_str_to_boolean(const char *s, int *ret) { if (s == NULL) { return -1; } else if (strcasecmp(s, "true") == 0 || strcasecmp(s, "on") == 0 || strcasecmp(s, "yes") == 0 || strcasecmp(s, "y") == 0 || strcasecmp(s, "1") == 0) { *ret = TRUE; return 1; } else if (strcasecmp(s, "false") == 0 || strcasecmp(s, "off") == 0 || strcasecmp(s, "no") == 0 || strcasecmp(s, "n") == 0 || strcasecmp(s, "0") == 0) { *ret = FALSE; return 1; } return -1; } char * crm_strip_trailing_newline(char *str) { int len; if (str == NULL) { return str; } for (len = strlen(str) - 1; len >= 0 && str[len] == '\n'; len--) { str[len] = '\0'; } return str; } /*! * \brief Check whether a string starts with a certain sequence * * \param[in] str String to check * \param[in] prefix Sequence to match against beginning of \p str * * \return \c true if \p str begins with match, \c false otherwise * \note This is equivalent to !strncmp(s, prefix, strlen(prefix)) * but is likely less efficient when prefix is a string literal * if the compiler optimizes away the strlen() at compile time, * and more efficient otherwise. */ bool pcmk__starts_with(const char *str, const char *prefix) { const char *s = str; const char *p = prefix; if (!s || !p) { return false; } while (*s && *p) { if (*s++ != *p++) { return false; } } return (*p == 0); } static inline bool ends_with(const char *s, const char *match, bool as_extension) { if (pcmk__str_empty(match)) { return true; } else if (s == NULL) { return false; } else { size_t slen, mlen; /* Besides as_extension, we could also check !strchr(&match[1], match[0]) but that would be inefficient. */ if (as_extension) { s = strrchr(s, match[0]); return (s == NULL)? false : !strcmp(s, match); } mlen = strlen(match); slen = strlen(s); return ((slen >= mlen) && !strcmp(s + slen - mlen, match)); } } /*! * \internal * \brief Check whether a string ends with a certain sequence * * \param[in] s String to check * \param[in] match Sequence to match against end of \p s * * \return \c true if \p s ends case-sensitively with match, \c false otherwise * \note pcmk__ends_with_ext() can be used if the first character of match * does not recur in match. */ bool pcmk__ends_with(const char *s, const char *match) { return ends_with(s, match, false); } /*! * \internal * \brief Check whether a string ends with a certain "extension" * * \param[in] s String to check * \param[in] match Extension to match against end of \p s, that is, * its first character must not occur anywhere * in the rest of that very sequence (example: file * extension where the last dot is its delimiter, * e.g., ".html"); incorrect results may be * returned otherwise. * * \return \c true if \p s ends (verbatim, i.e., case sensitively) * with "extension" designated as \p match (including empty * string), \c false otherwise * * \note Main incentive to prefer this function over \c pcmk__ends_with() * where possible is the efficiency (at the cost of added * restriction on \p match as stated; the complexity class * remains the same, though: BigO(M+N) vs. BigO(M+2N)). */ bool pcmk__ends_with_ext(const char *s, const char *match) { return ends_with(s, match, true); } /* * This re-implements g_str_hash as it was prior to glib2-2.28: * * https://gitlab.gnome.org/GNOME/glib/commit/354d655ba8a54b754cb5a3efb42767327775696c * * Note that the new g_str_hash is presumably a *better* hash (it's actually * a correct implementation of DJB's hash), but we need to preserve existing * behaviour, because the hash key ultimately determines the "sort" order * when iterating through GHashTables, which affects allocation of scores to * clone instances when iterating through rsc->allowed_nodes. It (somehow) * also appears to have some minor impact on the ordering of a few * pseudo_event IDs in the transition graph. */ guint g_str_hash_traditional(gconstpointer v) { const signed char *p; guint32 h = 0; for (p = v; *p != '\0'; p++) h = (h << 5) - h + *p; return h; } /* used with hash tables where case does not matter */ gboolean crm_strcase_equal(gconstpointer a, gconstpointer b) { return pcmk__str_eq((const char *)a, (const char *)b, pcmk__str_casei); } guint crm_strcase_hash(gconstpointer v) { const signed char *p; guint32 h = 0; for (p = v; *p != '\0'; p++) h = (h << 5) - h + g_ascii_tolower(*p); return h; } static void copy_str_table_entry(gpointer key, gpointer value, gpointer user_data) { if (key && value && user_data) { g_hash_table_insert((GHashTable*)user_data, strdup(key), strdup(value)); } } GHashTable * crm_str_table_dup(GHashTable *old_table) { GHashTable *new_table = NULL; if (old_table) { new_table = crm_str_table_new(); g_hash_table_foreach(old_table, copy_str_table_entry, new_table); } return new_table; } /*! * \internal * \brief Add a word to a string list of words * * \param[in,out] list Pointer to current string list (may not be NULL) * \param[in,out] len If not NULL, must be set to length of \p list, * and will be updated to new length of \p list * \param[in] word String to add to \p list (\p list will be * unchanged if this is NULL or the empty string) * \param[in] separator String to separate words in \p list * (a space will be used if this is NULL) * * \note This dynamically reallocates \p list as needed. \p word may contain * \p separator, though that would be a bad idea if the string needs to be * parsed later. */ void pcmk__add_separated_word(char **list, size_t *len, const char *word, const char *separator) { size_t orig_len, new_len; CRM_ASSERT(list != NULL); if (pcmk__str_empty(word)) { return; } // Use provided length, or calculate it if not available orig_len = (len != NULL)? *len : ((*list == NULL)? 0 : strlen(*list)); // Don't add a separator before the first word in the list if (orig_len == 0) { separator = ""; // Default to space-separated } else if (separator == NULL) { separator = " "; } new_len = orig_len + strlen(separator) + strlen(word); if (len != NULL) { *len = new_len; } // +1 for null terminator *list = pcmk__realloc(*list, new_len + 1); sprintf(*list + orig_len, "%s%s", separator, word); } /*! * \internal * \brief Compress data * * \param[in] data Data to compress * \param[in] length Number of characters of data to compress * \param[in] max Maximum size of compressed data (or 0 to estimate) * \param[out] result Where to store newly allocated compressed result * \param[out] result_len Where to store actual compressed length of result * * \return Standard Pacemaker return code */ int pcmk__compress(const char *data, unsigned int length, unsigned int max, char **result, unsigned int *result_len) { int rc; char *compressed = NULL; char *uncompressed = strdup(data); #ifdef CLOCK_MONOTONIC struct timespec after_t; struct timespec before_t; #endif if (max == 0) { max = (length * 1.01) + 601; // Size guaranteed to hold result } #ifdef CLOCK_MONOTONIC clock_gettime(CLOCK_MONOTONIC, &before_t); #endif compressed = calloc((size_t) max, sizeof(char)); CRM_ASSERT(compressed); *result_len = max; rc = BZ2_bzBuffToBuffCompress(compressed, result_len, uncompressed, length, CRM_BZ2_BLOCKS, 0, CRM_BZ2_WORK); free(uncompressed); if (rc != BZ_OK) { crm_err("Compression of %d bytes failed: %s " CRM_XS " bzerror=%d", length, bz2_strerror(rc), rc); free(compressed); return pcmk_rc_error; } #ifdef CLOCK_MONOTONIC clock_gettime(CLOCK_MONOTONIC, &after_t); crm_trace("Compressed %d bytes into %d (ratio %d:1) in %.0fms", length, *result_len, length / (*result_len), (after_t.tv_sec - before_t.tv_sec) * 1000 + (after_t.tv_nsec - before_t.tv_nsec) / 1e6); #else crm_trace("Compressed %d bytes into %d (ratio %d:1)", length, *result_len, length / (*result_len)); #endif *result = compressed; return pcmk_rc_ok; } char * crm_strdup_printf(char const *format, ...) { va_list ap; int len = 0; char *string = NULL; va_start(ap, format); len = vasprintf (&string, format, ap); CRM_ASSERT(len > 0); va_end(ap); return string; } int pcmk__parse_ll_range(const char *srcstring, long long *start, long long *end) { char *remainder = NULL; CRM_ASSERT(start != NULL && end != NULL); *start = PCMK__PARSE_INT_DEFAULT; *end = PCMK__PARSE_INT_DEFAULT; crm_trace("Attempting to decode: [%s]", srcstring); if (pcmk__str_empty(srcstring) || !strcmp(srcstring, "-")) { return pcmk_rc_unknown_format; } /* String starts with a dash, so this is either a range with * no beginning or garbage. * */ if (*srcstring == '-') { int rc = scan_ll(srcstring+1, end, &remainder); if (rc != pcmk_rc_ok || *remainder != '\0') { return pcmk_rc_unknown_format; } else { return pcmk_rc_ok; } } if (scan_ll(srcstring, start, &remainder) != pcmk_rc_ok) { return pcmk_rc_unknown_format; } if (*remainder && *remainder == '-') { if (*(remainder+1)) { char *more_remainder = NULL; int rc = scan_ll(remainder+1, end, &more_remainder); if (rc != pcmk_rc_ok || *more_remainder != '\0') { return pcmk_rc_unknown_format; } } } else if (*remainder && *remainder != '-') { *start = PCMK__PARSE_INT_DEFAULT; return pcmk_rc_unknown_format; } else { /* The input string contained only one number. Set start and end * to the same value and return pcmk_rc_ok. This gives the caller * a way to tell this condition apart from a range with no end. */ *end = *start; } return pcmk_rc_ok; } /*! * \internal * \brief Find a string in a list of strings * * Search \p lst for \p s, taking case into account. As a special case, * if "*" is the only element of \p lst, the search is successful. * * \param[in] lst List to search * \param[in] s String to search for * * \return \c TRUE if \p s is in \p lst, or \c FALSE otherwise */ gboolean pcmk__str_in_list(GList *lst, const gchar *s) { if (lst == NULL) { return FALSE; } if (strcmp(lst->data, "*") == 0 && lst->next == NULL) { return TRUE; } return g_list_find_custom(lst, s, (GCompareFunc) strcmp) != NULL; } static bool str_any_of(bool casei, const char *s, va_list args) { bool rc = false; if (s != NULL) { while (1) { const char *ele = va_arg(args, const char *); if (ele == NULL) { break; } else if (pcmk__str_eq(s, ele, casei? pcmk__str_casei : pcmk__str_none)) { rc = true; break; } } } return rc; } /*! * \internal * \brief Is a string a member of a list of strings? * * \param[in] s String to search for in \p ... * \param[in] ... Strings to compare \p s against. The final string * must be NULL. * * \note The comparison is done case-insensitively. The function name is * meant to be reminiscent of strcasecmp. * * \return \c true if \p s is in \p ..., or \c false otherwise */ bool pcmk__strcase_any_of(const char *s, ...) { va_list ap; bool rc; va_start(ap, s); rc = str_any_of(true, s, ap); va_end(ap); return rc; } /*! * \internal * \brief Is a string a member of a list of strings? * * \param[in] s String to search for in \p ... * \param[in] ... Strings to compare \p s against. The final string * must be NULL. * * \note The comparison is done taking case into account. * * \return \c true if \p s is in \p ..., or \c false otherwise */ bool pcmk__str_any_of(const char *s, ...) { va_list ap; bool rc; va_start(ap, s); rc = str_any_of(false, s, ap); va_end(ap); return rc; } /*! * \internal * \brief Check whether a character is in any of a list of strings * * \param[in] ch Character (ASCII) to search for * \param[in] ... Strings to search. Final argument must be * \c NULL. * * \return \c true if any of \p ... contain \p ch, \c false otherwise * \note \p ... must contain at least one argument (\c NULL). */ bool pcmk__char_in_any_str(int ch, ...) { bool rc = false; va_list ap; /* * Passing a char to va_start() can generate compiler warnings, * so ch is declared as an int. */ va_start(ap, ch); while (1) { const char *ele = va_arg(ap, const char *); if (ele == NULL) { break; } else if (strchr(ele, ch) != NULL) { rc = true; break; } } va_end(ap); return rc; } /*! * \brief Sort strings, with numeric portions sorted numerically * * Sort two strings case-insensitively like strcasecmp(), but with any numeric * portions of the string sorted numerically. This is particularly useful for * node names (for example, "node10" will sort higher than "node9" but lower * than "remotenode9"). * * \param[in] s1 First string to compare (must not be NULL) * \param[in] s2 Second string to compare (must not be NULL) * * \retval -1 \p s1 comes before \p s2 * \retval 0 \p s1 and \p s2 are equal * \retval 1 \p s1 comes after \p s2 */ int pcmk_numeric_strcasecmp(const char *s1, const char *s2) { while (*s1 && *s2) { if (isdigit(*s1) && isdigit(*s2)) { // If node names contain a number, sort numerically char *end1 = NULL; char *end2 = NULL; long num1 = strtol(s1, &end1, 10); long num2 = strtol(s2, &end2, 10); // allow ordering e.g. 007 > 7 size_t len1 = end1 - s1; size_t len2 = end2 - s2; if (num1 < num2) { return -1; } else if (num1 > num2) { return 1; } else if (len1 < len2) { return -1; } else if (len1 > len2) { return 1; } s1 = end1; s2 = end2; } else { // Compare non-digits case-insensitively int lower1 = tolower(*s1); int lower2 = tolower(*s2); if (lower1 < lower2) { return -1; } else if (lower1 > lower2) { return 1; } ++s1; ++s2; } } if (!*s1 && *s2) { return -1; } else if (*s1 && !*s2) { return 1; } return 0; } /* * \brief Sort strings. * * This is your one-stop function for string comparison. By default, this * function works like g_strcmp0. That is, like strcmp but a NULL string * sorts before a non-NULL string. * * Behavior can be changed with various flags: * * - pcmk__str_regex - The second string is a regular expression that the * first string will be matched against. * - pcmk__str_casei - By default, comparisons are done taking case into * account. This flag makes comparisons case-insensitive. * This can be combined with pcmk__str_regex. * - pcmk__str_null_matches - If one string is NULL and the other is not, * still return 0. * * \param[in] s1 First string to compare * \param[in] s2 Second string to compare, or a regular expression to * match if pcmk__str_regex is set * \param[in] flags A bitfield of pcmk__str_flags to modify operation * * \retval -1 \p s1 is NULL or comes before \p s2 * \retval 0 \p s1 and \p s2 are equal, or \p s1 is found in \p s2 if * pcmk__str_regex is set * \retval 1 \p s2 is NULL or \p s1 comes after \p s2, or if \p s2 * is an invalid regular expression, or \p s1 was not found * in \p s2 if pcmk__str_regex is set. */ int pcmk__strcmp(const char *s1, const char *s2, uint32_t flags) { /* If this flag is set, the second string is a regex. */ if (pcmk_is_set(flags, pcmk__str_regex)) { regex_t *r_patt = calloc(1, sizeof(regex_t)); int reg_flags = REG_EXTENDED | REG_NOSUB; int regcomp_rc = 0; int rc = 0; if (s1 == NULL || s2 == NULL) { free(r_patt); return 1; } if (pcmk_is_set(flags, pcmk__str_casei)) { reg_flags |= REG_ICASE; } regcomp_rc = regcomp(r_patt, s2, reg_flags); if (regcomp_rc != 0) { rc = 1; crm_err("Bad regex '%s' for update: %s", s2, strerror(regcomp_rc)); } else { rc = regexec(r_patt, s1, 0, NULL, 0); if (rc != 0) { rc = 1; } } regfree(r_patt); free(r_patt); return rc; } /* If the strings are the same pointer, return 0 immediately. */ if (s1 == s2) { return 0; } /* If this flag is set, return 0 if either (or both) of the input strings * are NULL. If neither one is NULL, we need to continue and compare * them normally. */ if (pcmk_is_set(flags, pcmk__str_null_matches)) { if (s1 == NULL || s2 == NULL) { return 0; } } /* Handle the cases where one is NULL and the str_null_matches flag is not set. * A NULL string always sorts to the beginning. */ if (s1 == NULL) { return -1; } else if (s2 == NULL) { return 1; } if (pcmk_is_set(flags, pcmk__str_casei)) { return strcasecmp(s1, s2); } else { return strcmp(s1, s2); } } // Deprecated functions kept only for backward API compatibility gboolean safe_str_neq(const char *a, const char *b); gboolean crm_str_eq(const char *a, const char *b, gboolean use_case); //! \deprecated Use pcmk__str_eq() instead gboolean safe_str_neq(const char *a, const char *b) { if (a == b) { return FALSE; } else if (a == NULL || b == NULL) { return TRUE; } else if (strcasecmp(a, b) == 0) { return FALSE; } return TRUE; } //! \deprecated Use pcmk__str_eq() instead gboolean crm_str_eq(const char *a, const char *b, gboolean use_case) { if (use_case) { return g_strcmp0(a, b) == 0; /* TODO - Figure out which calls, if any, really need to be case independent */ } else if (a == b) { return TRUE; } else if (a == NULL || b == NULL) { /* shouldn't be comparing NULLs */ return FALSE; } else if (strcasecmp(a, b) == 0) { return TRUE; } return FALSE; }