diff --git a/tools/shell/regression/testcases/ra.exp b/tools/shell/regression/testcases/ra.exp
index aaa41803f5..4543a62179 100644
--- a/tools/shell/regression/testcases/ra.exp
+++ b/tools/shell/regression/testcases/ra.exp
@@ -1,108 +1,114 @@
 .TRY RA interface
 .INP: ra
 .INP: providers IPaddr
 heartbeat
 .INP: providers Dummy
 heartbeat pacemaker
 .INP: info IPaddr ocf
 Manages virtual IPv4 addresses (ocf:heartbeat:IPaddr)
 
 This script manages IP alias IP addresses
 It can add an IP alias, or remove one.
 
 Parameters (* denotes required, [] the default):
 
 ip* (string): IPv4 address
     The IPv4 address to be configured in dotted quad notation, for example
     "192.168.1.1".
 
 nic (string, [eth0]): Network interface
     The base network interface on which the IP address will be brought
     online.
     
     If left empty, the script will try and determine this from the
     routing table.
     
     Do NOT specify an alias interface in the form eth0:1 or anything here;
     rather, specify the base interface only.
 
 cidr_netmask (string): Netmask
     The netmask for the interface in CIDR format. (ie, 24), or in
     dotted quad notation  255.255.255.0).
     
     If unspecified, the script will also try to determine this from the
     routing table.
 
 broadcast (string): Broadcast address
     Broadcast address associated with the IP. If left empty, the script will
     determine this from the netmask.
 
 iflabel (string): Interface label
     You can specify an additional label for your IP address here.
 
 lvs_support (boolean, [false]): Enable support for LVS DR
     Enable support for LVS Direct Routing configurations. In case a IP
     address is stopped, only move it to the loopback device to allow the
     local node to continue to service requests, but no longer advertise it
     on the network.
 
-local_stop_script (string): Script called when the IP is released
+local_stop_script (string): 
     Script called when the IP is released
 
-local_start_script (string): Script called when the IP is added
+local_start_script (string): 
     Script called when the IP is added
 
 ARP_INTERVAL_MS (integer, [500]): milliseconds between gratuitous ARPs
     milliseconds between ARPs
 
 ARP_REPEAT (integer, [10]): repeat count
     How many gratuitous ARPs to send out when bringing up a new address
 
 ARP_BACKGROUND (boolean, [yes]): run in background
     run in background (no longer any reason to do this)
 
 ARP_NETMASK (string, [ffffffffffff]): netmask for ARP
     netmask for ARP - in nonstandard hexadecimal format.
 
 Operations' defaults (advisory minimum):
 
     start         timeout=90
     stop          timeout=100
     monitor_0     interval=5s timeout=20s start-delay=0
 .INP: info external/ssh stonith
 ssh STONITH external device (stonith:external/ssh)
 
 ssh-based Linux host reset
 Fine for testing, but not suitable for production!
 
 Parameters (* denotes required, [] the default):
 
 hostlist* (string): Hostlist
     The list of hosts that the STONITH device controls
 
 livedangerously (enum): Live Dangerously!!
     Set to "yes" if you want to risk your system's integrity.
     Of course, since this plugin isn't for production, using it
     in production at all is a bad idea.  On the other hand,
     setting this parameter to yes makes it an even worse idea.
     Viva la Vida Loca!
 
+stonith-timeout (time, [60s]): 
+    How long to wait for the STONITH action to complete. Overrides the stonith-timeout cluster property
+
+priority (integer, [0]): 
+    The priority of the stonith resource. The lower the number, the higher the priority.
+
 Operations' defaults (advisory minimum):
 
     start         timeout=15
     stop          timeout=15
     status        timeout=15
     monitor_0     interval=15 timeout=15 start-delay=15
 .INP: info lrmregtest lsb
 lsb:lrmregtest
 
 lrmregtest
 
 Operations' defaults (advisory minimum):
 
     start         timeout=15
     stop          timeout=15
     status        timeout=15
     restart       timeout=15
     force-reload  timeout=15
     monitor_0     interval=15 timeout=15 start-delay=15