diff --git a/cts/lab/CTSaudits.py b/cts/lab/CTSaudits.py
index ae823fa9c6..40b6e2ff58 100755
--- a/cts/lab/CTSaudits.py
+++ b/cts/lab/CTSaudits.py
@@ -1,875 +1,875 @@
""" Auditing classes for Pacemaker's Cluster Test Suite (CTS)
"""
__copyright__ = "Copyright 2000-2023 the Pacemaker project contributors"
__license__ = "GNU General Public License version 2 or later (GPLv2+) WITHOUT ANY WARRANTY"
import time, re, uuid
from cts.watcher import LogWatcher
from pacemaker.buildoptions import BuildOptions
class ClusterAudit(object):
def __init__(self, cm):
self.CM = cm
def __call__(self):
raise ValueError("Abstract Class member (__call__)")
def is_applicable(self):
'''Return TRUE if we are applicable in the current test configuration'''
raise ValueError("Abstract Class member (is_applicable)")
return 1
def log(self, args):
self.CM.log("audit: %s" % args)
def debug(self, args):
self.CM.debug("audit: %s" % args)
def name(self):
raise ValueError("Abstract Class member (name)")
AllAuditClasses = [ ]
class LogAudit(ClusterAudit):
def name(self):
return "LogAudit"
def __init__(self, cm):
self.CM = cm
self.kinds = [ "combined syslog", "journal", "remote" ]
def RestartClusterLogging(self, nodes=None):
if not nodes:
nodes = self.CM.Env["nodes"]
self.CM.debug("Restarting logging on: %s" % repr(nodes))
for node in nodes:
if self.CM.Env["have_systemd"]:
(rc, _) = self.CM.rsh(node, "systemctl stop systemd-journald.socket")
if rc != 0:
self.CM.log ("ERROR: Cannot stop 'systemd-journald' on %s" % node)
(rc, _) = self.CM.rsh(node, "systemctl start systemd-journald.service")
if rc != 0:
self.CM.log ("ERROR: Cannot start 'systemd-journald' on %s" % node)
(rc, _) = self.CM.rsh(node, "service %s restart" % self.CM.Env["syslogd"])
if rc != 0:
self.CM.log ("ERROR: Cannot restart '%s' on %s" % (self.CM.Env["syslogd"], node))
def TestLogging(self):
patterns = []
prefix = "Test message from"
suffix = str(uuid.uuid4())
watch = {}
for node in self.CM.Env["nodes"]:
# Look for the node name in two places to make sure
# that syslog is logging with the correct hostname
m = re.search("^([^.]+).*", node)
if m:
simple = m.group(1)
else:
simple = node
patterns.append("%s.*%s %s %s" % (simple, prefix, node, suffix))
watch_pref = self.CM.Env["LogWatcher"]
if watch_pref == "any":
for k in self.kinds:
watch[k] = LogWatcher(self.CM.Env["LogFileName"], patterns, "LogAudit", 5, silent=True, hosts=self.CM.Env["nodes"], kind=k)
watch[k].setwatch()
else:
k = watch_pref
watch[k] = LogWatcher(self.CM.Env["LogFileName"], patterns, "LogAudit", 5, silent=True, hosts=self.CM.Env["nodes"], kind=k)
watch[k].setwatch()
if watch_pref == "any": self.CM.log("Writing log with key: %s" % (suffix))
for node in self.CM.Env["nodes"]:
cmd = "logger -p %s.info %s %s %s" % (self.CM.Env["SyslogFacility"], prefix, node, suffix)
(rc, _) = self.CM.rsh(node, cmd, synchronous=False, verbose=0)
if rc != 0:
self.CM.log ("ERROR: Cannot execute remote command [%s] on %s" % (cmd, node))
for k in self.kinds:
if k in watch:
w = watch[k]
if watch_pref == "any": self.CM.log("Testing for %s logs" % (k))
w.lookforall(silent=True)
if not w.unmatched:
if watch_pref == "any":
self.CM.log ("Continuing with %s-based log reader" % (w.kind))
self.CM.Env["LogWatcher"] = w.kind
return 1
for k in list(watch.keys()):
w = watch[k]
if w.unmatched:
for regex in w.unmatched:
self.CM.log ("Test message [%s] not found in %s logs." % (regex, w.kind))
return 0
def __call__(self):
max = 3
attempt = 0
self.CM.ns.WaitForAllNodesToComeUp(self.CM.Env["nodes"])
while attempt <= max and self.TestLogging() == 0:
attempt = attempt + 1
self.RestartClusterLogging()
time.sleep(60*attempt)
if attempt > max:
self.CM.log("ERROR: Cluster logging unrecoverable.")
return 0
return 1
def is_applicable(self):
if self.CM.Env["DoBSC"]:
return 0
if self.CM.Env["LogAuditDisabled"]:
return 0
return 1
class DiskAudit(ClusterAudit):
def name(self):
return "DiskspaceAudit"
def __init__(self, cm):
self.CM = cm
def __call__(self):
result = 1
# @TODO Use directory of PCMK_logfile if set on host
dfcmd = "df -BM " + BuildOptions.LOG_DIR + " | tail -1 | awk '{print $(NF-1)\" \"$(NF-2)}' | tr -d 'M%'"
self.CM.ns.WaitForAllNodesToComeUp(self.CM.Env["nodes"])
for node in self.CM.Env["nodes"]:
(_, dfout) = self.CM.rsh(node, dfcmd, verbose=1)
if not dfout:
self.CM.log ("ERROR: Cannot execute remote df command [%s] on %s" % (dfcmd, node))
else:
dfout = dfout[0].strip()
try:
(used, remain) = dfout.split()
used_percent = int(used)
remaining_mb = int(remain)
except (ValueError, TypeError):
self.CM.log("Warning: df output '%s' from %s was invalid [%s, %s]"
% (dfout, node, used, remain))
else:
if remaining_mb < 10 or used_percent > 95:
self.CM.log("CRIT: Out of log disk space on %s (%d%% / %dMB)"
% (node, used_percent, remaining_mb))
result = None
if self.CM.Env["continue"] == 1:
answer = "Y"
else:
try:
answer = input('Continue? [nY]')
except EOFError as e:
answer = "n"
if answer and answer == "n":
raise ValueError("Disk full on %s" % (node))
elif remaining_mb < 100 or used_percent > 90:
self.CM.log("WARN: Low on log disk space (%dMB) on %s" % (remaining_mb, node))
return result
def is_applicable(self):
if self.CM.Env["DoBSC"]:
return 0
return 1
class FileAudit(ClusterAudit):
def name(self):
return "FileAudit"
def __init__(self, cm):
self.CM = cm
self.known = []
def __call__(self):
result = 1
self.CM.ns.WaitForAllNodesToComeUp(self.CM.Env["nodes"])
for node in self.CM.Env["nodes"]:
(_, lsout) = self.CM.rsh(node, "ls -al /var/lib/pacemaker/cores/* | grep core.[0-9]", verbose=1)
for line in lsout:
line = line.strip()
if line not in self.known:
result = 0
self.known.append(line)
self.CM.log("Warning: Pacemaker core file on %s: %s" % (node, line))
(_, lsout) = self.CM.rsh(node, "ls -al /var/lib/corosync | grep core.[0-9]", verbose=1)
for line in lsout:
line = line.strip()
if line not in self.known:
result = 0
self.known.append(line)
self.CM.log("Warning: Corosync core file on %s: %s" % (node, line))
if node in self.CM.ShouldBeStatus and self.CM.ShouldBeStatus[node] == "down":
clean = 0
(_, lsout) = self.CM.rsh(node, "ls -al /dev/shm | grep qb-", verbose=1)
for line in lsout:
result = 0
clean = 1
self.CM.log("Warning: Stale IPC file on %s: %s" % (node, line))
if clean:
(_, lsout) = self.CM.rsh(node, "ps axf | grep -e pacemaker -e corosync", verbose=1)
for line in lsout:
self.CM.debug("ps[%s]: %s" % (node, line))
self.CM.rsh(node, "rm -rf /dev/shm/qb-*")
else:
self.CM.debug("Skipping %s" % node)
return result
def is_applicable(self):
return 1
class AuditResource(object):
def __init__(self, cm, line):
fields = line.split()
self.CM = cm
self.line = line
self.type = fields[1]
self.id = fields[2]
self.clone_id = fields[3]
self.parent = fields[4]
self.rprovider = fields[5]
self.rclass = fields[6]
self.rtype = fields[7]
self.host = fields[8]
self.needs_quorum = fields[9]
self.flags = int(fields[10])
self.flags_s = fields[11]
if self.parent == "NA":
self.parent = None
def unique(self):
if self.flags & int("0x00000020", 16):
return 1
return 0
def orphan(self):
if self.flags & int("0x00000001", 16):
return 1
return 0
def managed(self):
if self.flags & int("0x00000002", 16):
return 1
return 0
class AuditConstraint(object):
def __init__(self, cm, line):
fields = line.split()
self.CM = cm
self.line = line
self.type = fields[1]
self.id = fields[2]
self.rsc = fields[3]
self.target = fields[4]
self.score = fields[5]
self.rsc_role = fields[6]
self.target_role = fields[7]
if self.rsc_role == "NA":
self.rsc_role = None
if self.target_role == "NA":
self.target_role = None
class PrimitiveAudit(ClusterAudit):
def name(self):
return "PrimitiveAudit"
def __init__(self, cm):
self.CM = cm
def doResourceAudit(self, resource, quorum):
rc = 1
active = self.CM.ResourceLocation(resource.id)
if len(active) == 1:
if quorum:
self.debug("Resource %s active on %s" % (resource.id, repr(active)))
elif resource.needs_quorum == 1:
self.CM.log("Resource %s active without quorum: %s"
% (resource.id, repr(active)))
rc = 0
elif not resource.managed():
self.CM.log("Resource %s not managed. Active on %s"
% (resource.id, repr(active)))
elif not resource.unique():
# TODO: Figure out a clever way to actually audit these resource types
if len(active) > 1:
self.debug("Non-unique resource %s is active on: %s"
% (resource.id, repr(active)))
else:
self.debug("Non-unique resource %s is not active" % resource.id)
elif len(active) > 1:
self.CM.log("Resource %s is active multiple times: %s"
% (resource.id, repr(active)))
rc = 0
elif resource.orphan():
self.debug("Resource %s is an inactive orphan" % resource.id)
elif len(self.inactive_nodes) == 0:
self.CM.log("WARN: Resource %s not served anywhere" % resource.id)
rc = 0
elif self.CM.Env["warn-inactive"] == 1:
if quorum or not resource.needs_quorum:
self.CM.log("WARN: Resource %s not served anywhere (Inactive nodes: %s)"
% (resource.id, repr(self.inactive_nodes)))
else:
self.debug("Resource %s not served anywhere (Inactive nodes: %s)"
% (resource.id, repr(self.inactive_nodes)))
elif quorum or not resource.needs_quorum:
self.debug("Resource %s not served anywhere (Inactive nodes: %s)"
% (resource.id, repr(self.inactive_nodes)))
return rc
def setup(self):
self.target = None
self.resources = []
self.constraints = []
self.active_nodes = []
self.inactive_nodes = []
for node in self.CM.Env["nodes"]:
if self.CM.ShouldBeStatus[node] == "up":
self.active_nodes.append(node)
else:
self.inactive_nodes.append(node)
for node in self.CM.Env["nodes"]:
if self.target == None and self.CM.ShouldBeStatus[node] == "up":
self.target = node
if not self.target:
# TODO: In Pacemaker 1.0 clusters we'll be able to run crm_resource
# with CIB_file=/path/to/cib.xml even when the cluster isn't running
self.debug("No nodes active - skipping %s" % self.name())
return 0
(_, lines) = self.CM.rsh(self.target, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
self.resources.append(AuditResource(self.CM, line))
elif re.search("^Constraint", line):
self.constraints.append(AuditConstraint(self.CM, line))
else:
self.CM.log("Unknown entry: %s" % line);
return 1
def __call__(self):
rc = 1
if not self.setup():
return 1
quorum = self.CM.HasQuorum(None)
for resource in self.resources:
if resource.type == "primitive":
if self.doResourceAudit(resource, quorum) == 0:
rc = 0
return rc
def is_applicable(self):
# @TODO Due to long-ago refactoring, this name test would never match,
# so this audit (and those derived from it) would never run.
# Uncommenting the next lines fixes the name test, but that then
# exposes pre-existing bugs that need to be fixed.
#if self.CM["Name"] == "crm-corosync":
# return 1
return 0
class GroupAudit(PrimitiveAudit):
def name(self):
return "GroupAudit"
def __call__(self):
rc = 1
if not self.setup():
return 1
for group in self.resources:
if group.type == "group":
first_match = 1
group_location = None
for child in self.resources:
if child.parent == group.id:
nodes = self.CM.ResourceLocation(child.id)
if first_match and len(nodes) > 0:
group_location = nodes[0]
first_match = 0
if len(nodes) > 1:
rc = 0
self.CM.log("Child %s of %s is active more than once: %s"
% (child.id, group.id, repr(nodes)))
elif len(nodes) == 0:
# Groups are allowed to be partially active
# However we do need to make sure later children aren't running
group_location = None
self.debug("Child %s of %s is stopped" % (child.id, group.id))
elif nodes[0] != group_location:
rc = 0
self.CM.log("Child %s of %s is active on the wrong node (%s) expected %s"
% (child.id, group.id, nodes[0], group_location))
else:
self.debug("Child %s of %s is active on %s" % (child.id, group.id, nodes[0]))
return rc
class CloneAudit(PrimitiveAudit):
def name(self):
return "CloneAudit"
def __call__(self):
rc = 1
if not self.setup():
return 1
for clone in self.resources:
if clone.type == "clone":
for child in self.resources:
if child.parent == clone.id and child.type == "primitive":
self.debug("Checking child %s of %s..." % (child.id, clone.id))
# Check max and node_max
# Obtain with:
# crm_resource -g clone_max --meta -r child.id
# crm_resource -g clone_node_max --meta -r child.id
return rc
class ColocationAudit(PrimitiveAudit):
def name(self):
return "ColocationAudit"
def crm_location(self, resource):
(rc, lines) = self.CM.rsh(self.target, "crm_resource -W -r %s -Q"%resource, verbose=1)
hosts = []
if rc == 0:
for line in lines:
fields = line.split()
hosts.append(fields[0])
return hosts
def __call__(self):
rc = 1
if not self.setup():
return 1
for coloc in self.constraints:
if coloc.type == "rsc_colocation":
source = self.crm_location(coloc.rsc)
target = self.crm_location(coloc.target)
if len(source) == 0:
self.debug("Colocation audit (%s): %s not running" % (coloc.id, coloc.rsc))
else:
for node in source:
if not node in target:
rc = 0
self.CM.log("Colocation audit (%s): %s running on %s (not in %s)"
% (coloc.id, coloc.rsc, node, repr(target)))
else:
self.debug("Colocation audit (%s): %s running on %s (in %s)"
% (coloc.id, coloc.rsc, node, repr(target)))
return rc
class ControllerStateAudit(ClusterAudit):
def __init__(self, cm):
self.CM = cm
self.Stats = {"calls":0
, "success":0
, "failure":0
, "skipped":0
, "auditfail":0}
def has_key(self, key):
return key in self.Stats
def __setitem__(self, key, value):
self.Stats[key] = value
def __getitem__(self, key):
return self.Stats[key]
def incr(self, name):
'''Increment (or initialize) the value associated with the given name'''
if not name in self.Stats:
self.Stats[name] = 0
self.Stats[name] = self.Stats[name]+1
def __call__(self):
passed = 1
up_are_down = 0
down_are_up = 0
unstable_list = []
for node in self.CM.Env["nodes"]:
should_be = self.CM.ShouldBeStatus[node]
rc = self.CM.test_node_CM(node)
if rc > 0:
if should_be == "down":
down_are_up = down_are_up + 1
if rc == 1:
unstable_list.append(node)
elif should_be == "up":
up_are_down = up_are_down + 1
if len(unstable_list) > 0:
passed = 0
self.CM.log("Cluster is not stable: %d (of %d): %s"
% (len(unstable_list), self.CM.upcount(), repr(unstable_list)))
if up_are_down > 0:
passed = 0
self.CM.log("%d (of %d) nodes expected to be up were down."
% (up_are_down, len(self.CM.Env["nodes"])))
if down_are_up > 0:
passed = 0
self.CM.log("%d (of %d) nodes expected to be down were up."
% (down_are_up, len(self.CM.Env["nodes"])))
return passed
def name(self):
return "ControllerStateAudit"
def is_applicable(self):
# @TODO Due to long-ago refactoring, this name test would never match,
# so this audit (and those derived from it) would never run.
# Uncommenting the next lines fixes the name test, but that then
# exposes pre-existing bugs that need to be fixed.
#if self.CM["Name"] == "crm-corosync":
# return 1
return 0
class CIBAudit(ClusterAudit):
def __init__(self, cm):
self.CM = cm
self.Stats = {"calls":0
, "success":0
, "failure":0
, "skipped":0
, "auditfail":0}
def has_key(self, key):
return key in self.Stats
def __setitem__(self, key, value):
self.Stats[key] = value
def __getitem__(self, key):
return self.Stats[key]
def incr(self, name):
'''Increment (or initialize) the value associated with the given name'''
if not name in self.Stats:
self.Stats[name] = 0
self.Stats[name] = self.Stats[name]+1
def __call__(self):
passed = 1
ccm_partitions = self.CM.find_partitions()
if len(ccm_partitions) == 0:
self.debug("\tNo partitions to audit")
return 1
for partition in ccm_partitions:
self.debug("\tAuditing CIB consistency for: %s" % partition)
partition_passed = 0
if self.audit_cib_contents(partition) == 0:
passed = 0
return passed
def audit_cib_contents(self, hostlist):
passed = 1
node0 = None
node0_xml = None
partition_hosts = hostlist.split()
for node in partition_hosts:
node_xml = self.store_remote_cib(node, node0)
if node_xml == None:
self.CM.log("Could not perform audit: No configuration from %s" % node)
passed = 0
elif node0 == None:
node0 = node
node0_xml = node_xml
elif node0_xml == None:
self.CM.log("Could not perform audit: No configuration from %s" % node0)
passed = 0
else:
(rc, result) = self.CM.rsh(
node0, "crm_diff -VV -cf --new %s --original %s" % (node_xml, node0_xml), verbose=1)
if rc != 0:
self.CM.log("Diff between %s and %s failed: %d" % (node0_xml, node_xml, rc))
passed = 0
for line in result:
if not re.search("", line):
passed = 0
self.debug("CibDiff[%s-%s]: %s" % (node0, node, line))
else:
self.debug("CibDiff[%s-%s] Ignoring: %s" % (node0, node, line))
# self.CM.rsh(node0, "rm -f %s" % node_xml)
# self.CM.rsh(node0, "rm -f %s" % node0_xml)
return passed
def store_remote_cib(self, node, target):
combined = ""
filename = "/tmp/ctsaudit.%s.xml" % node
if not target:
target = node
(rc, lines) = self.CM.rsh(node, self.CM["CibQuery"], verbose=1)
if rc != 0:
self.CM.log("Could not retrieve configuration")
return None
self.CM.rsh("localhost", "rm -f %s" % filename)
for line in lines:
self.CM.rsh("localhost", "echo \'%s\' >> %s" % (line[:-1], filename), verbose=0)
- if self.CM.rsh.cp(filename, "root@%s:%s" % (target, filename), silent=True) != 0:
+ if self.CM.rsh.copy(filename, "root@%s:%s" % (target, filename), silent=True) != 0:
self.CM.log("Could not store configuration")
return None
return filename
def name(self):
return "CibAudit"
def is_applicable(self):
# @TODO Due to long-ago refactoring, this name test would never match,
# so this audit (and those derived from it) would never run.
# Uncommenting the next lines fixes the name test, but that then
# exposes pre-existing bugs that need to be fixed.
#if self.CM["Name"] == "crm-corosync":
# return 1
return 0
class PartitionAudit(ClusterAudit):
def __init__(self, cm):
self.CM = cm
self.Stats = {"calls":0
, "success":0
, "failure":0
, "skipped":0
, "auditfail":0}
self.NodeEpoch = {}
self.NodeState = {}
self.NodeQuorum = {}
def has_key(self, key):
return key in self.Stats
def __setitem__(self, key, value):
self.Stats[key] = value
def __getitem__(self, key):
return self.Stats[key]
def incr(self, name):
'''Increment (or initialize) the value associated with the given name'''
if not name in self.Stats:
self.Stats[name] = 0
self.Stats[name] = self.Stats[name]+1
def __call__(self):
passed = 1
ccm_partitions = self.CM.find_partitions()
if ccm_partitions == None or len(ccm_partitions) == 0:
return 1
self.CM.cluster_stable(double_check=True)
if len(ccm_partitions) != self.CM.partitions_expected:
self.CM.log("ERROR: %d cluster partitions detected:" % len(ccm_partitions))
passed = 0
for partition in ccm_partitions:
self.CM.log("\t %s" % partition)
for partition in ccm_partitions:
partition_passed = 0
if self.audit_partition(partition) == 0:
passed = 0
return passed
def trim_string(self, avalue):
if not avalue:
return None
if len(avalue) > 1:
return avalue[:-1]
def trim2int(self, avalue):
if not avalue:
return None
if len(avalue) > 1:
return int(avalue[:-1])
def audit_partition(self, partition):
passed = 1
dc_found = []
dc_allowed_list = []
lowest_epoch = None
node_list = partition.split()
self.debug("Auditing partition: %s" % (partition))
for node in node_list:
if self.CM.ShouldBeStatus[node] != "up":
self.CM.log("Warn: Node %s appeared out of nowhere" % (node))
self.CM.ShouldBeStatus[node] = "up"
# not in itself a reason to fail the audit (not what we're
# checking for in this audit)
(_, out) = self.CM.rsh(node, self.CM["StatusCmd"] % node, verbose=1)
self.NodeState[node] = out[0].strip()
(_, out) = self.CM.rsh(node, self.CM["EpochCmd"], verbose=1)
self.NodeEpoch[node] = out[0].strip()
(_, out) = self.CM.rsh(node, self.CM["QuorumCmd"], verbose=1)
self.NodeQuorum[node] = out[0].strip()
self.debug("Node %s: %s - %s - %s." % (node, self.NodeState[node], self.NodeEpoch[node], self.NodeQuorum[node]))
self.NodeState[node] = self.trim_string(self.NodeState[node])
self.NodeEpoch[node] = self.trim2int(self.NodeEpoch[node])
self.NodeQuorum[node] = self.trim_string(self.NodeQuorum[node])
if not self.NodeEpoch[node]:
self.CM.log("Warn: Node %s dissappeared: cant determin epoch" % (node))
self.CM.ShouldBeStatus[node] = "down"
# not in itself a reason to fail the audit (not what we're
# checking for in this audit)
elif lowest_epoch == None or self.NodeEpoch[node] < lowest_epoch:
lowest_epoch = self.NodeEpoch[node]
if not lowest_epoch:
self.CM.log("Lowest epoch not determined in %s" % (partition))
passed = 0
for node in node_list:
if self.CM.ShouldBeStatus[node] == "up":
if self.CM.is_node_dc(node, self.NodeState[node]):
dc_found.append(node)
if self.NodeEpoch[node] == lowest_epoch:
self.debug("%s: OK" % node)
elif not self.NodeEpoch[node]:
self.debug("Check on %s ignored: no node epoch" % node)
elif not lowest_epoch:
self.debug("Check on %s ignored: no lowest epoch" % node)
else:
self.CM.log("DC %s is not the oldest node (%d vs. %d)"
% (node, self.NodeEpoch[node], lowest_epoch))
passed = 0
if len(dc_found) == 0:
self.CM.log("DC not found on any of the %d allowed nodes: %s (of %s)"
% (len(dc_allowed_list), str(dc_allowed_list), str(node_list)))
elif len(dc_found) > 1:
self.CM.log("%d DCs (%s) found in cluster partition: %s"
% (len(dc_found), str(dc_found), str(node_list)))
passed = 0
if passed == 0:
for node in node_list:
if self.CM.ShouldBeStatus[node] == "up":
self.CM.log("epoch %s : %s"
% (self.NodeEpoch[node], self.NodeState[node]))
return passed
def name(self):
return "PartitionAudit"
def is_applicable(self):
# @TODO Due to long-ago refactoring, this name test would never match,
# so this audit (and those derived from it) would never run.
# Uncommenting the next lines fixes the name test, but that then
# exposes pre-existing bugs that need to be fixed.
#if self.CM["Name"] == "crm-corosync":
# return 1
return 0
AllAuditClasses.append(DiskAudit)
AllAuditClasses.append(FileAudit)
AllAuditClasses.append(LogAudit)
AllAuditClasses.append(ControllerStateAudit)
AllAuditClasses.append(PartitionAudit)
AllAuditClasses.append(PrimitiveAudit)
AllAuditClasses.append(GroupAudit)
AllAuditClasses.append(CloneAudit)
AllAuditClasses.append(ColocationAudit)
AllAuditClasses.append(CIBAudit)
def AuditList(cm):
result = []
for auditclass in AllAuditClasses:
a = auditclass(cm)
if a.is_applicable():
result.append(a)
return result
diff --git a/cts/lab/CTStests.py b/cts/lab/CTStests.py
index 80a4c825e0..f238a24199 100644
--- a/cts/lab/CTStests.py
+++ b/cts/lab/CTStests.py
@@ -1,3178 +1,3178 @@
""" Test-specific classes for Pacemaker's Cluster Test Suite (CTS)
"""
__copyright__ = "Copyright 2000-2023 the Pacemaker project contributors"
__license__ = "GNU General Public License version 2 or later (GPLv2+) WITHOUT ANY WARRANTY"
#
# SPECIAL NOTE:
#
# Tests may NOT implement any cluster-manager-specific code in them.
# EXTEND the ClusterManager object to provide the base capabilities
# the test needs if you need to do something that the current CM classes
# do not. Otherwise you screw up the whole point of the object structure
# in CTS.
#
# Thank you.
#
import os
import re
import time
import subprocess
import tempfile
from stat import *
from cts import CTS
from cts.CTSaudits import *
from cts.watcher import LogWatcher
from cts.environment import EnvFactory
from pacemaker import BuildOptions
from pacemaker._cts.logging import LogFactory
from pacemaker._cts.patterns import PatternSelector
from pacemaker._cts.remote import RemoteFactory
AllTestClasses = [ ]
class CTSTest(object):
'''
A Cluster test.
We implement the basic set of properties and behaviors for a generic
cluster test.
Cluster tests track their own statistics.
We keep each of the kinds of counts we track as separate {name,value}
pairs.
'''
def __init__(self, cm):
#self.name="the unnamed test"
self.Stats = {"calls":0
, "success":0
, "failure":0
, "skipped":0
, "auditfail":0}
# if not issubclass(cm.__class__, ClusterManager):
# raise ValueError("Must be a ClusterManager object")
self.CM = cm
self.Env = EnvFactory().getInstance()
self.rsh = RemoteFactory().getInstance()
self.logger = LogFactory()
self.templates = PatternSelector(cm["Name"])
self.Audits = []
self.timeout = 120
self.passed = 1
self.is_loop = 0
self.is_unsafe = 0
self.is_experimental = 0
self.is_container = 0
self.is_valgrind = 0
self.benchmark = 0 # which tests to benchmark
self.timer = {} # timers
def log(self, args):
self.logger.log(args)
def debug(self, args):
self.logger.debug(args)
def has_key(self, key):
return key in self.Stats
def __setitem__(self, key, value):
self.Stats[key] = value
def __getitem__(self, key):
if str(key) == "0":
raise ValueError("Bad call to 'foo in X', should reference 'foo in X.Stats' instead")
if key in self.Stats:
return self.Stats[key]
return None
def log_mark(self, msg):
self.debug("MARK: test %s %s %d" % (self.name,msg,time.time()))
return
def get_timer(self,key = "test"):
try: return self.timer[key]
except: return 0
def set_timer(self,key = "test"):
self.timer[key] = time.time()
return self.timer[key]
def log_timer(self,key = "test"):
elapsed = 0
if key in self.timer:
elapsed = time.time() - self.timer[key]
s = key == "test" and self.name or "%s:%s" % (self.name,key)
self.debug("%s runtime: %.2f" % (s, elapsed))
del self.timer[key]
return elapsed
def incr(self, name):
'''Increment (or initialize) the value associated with the given name'''
if not name in self.Stats:
self.Stats[name] = 0
self.Stats[name] = self.Stats[name]+1
# Reset the test passed boolean
if name == "calls":
self.passed = 1
def failure(self, reason="none"):
'''Increment the failure count'''
self.passed = 0
self.incr("failure")
self.logger.log(("Test %s" % self.name).ljust(35) + " FAILED: %s" % reason)
return None
def success(self):
'''Increment the success count'''
self.incr("success")
return 1
def skipped(self):
'''Increment the skipped count'''
self.incr("skipped")
return 1
def __call__(self, node):
'''Perform the given test'''
raise ValueError("Abstract Class member (__call__)")
self.incr("calls")
return self.failure()
def audit(self):
passed = 1
if len(self.Audits) > 0:
for audit in self.Audits:
if not audit():
self.logger.log("Internal %s Audit %s FAILED." % (self.name, audit.name()))
self.incr("auditfail")
passed = 0
return passed
def setup(self, node):
'''Setup the given test'''
return self.success()
def teardown(self, node):
'''Tear down the given test'''
return self.success()
def create_watch(self, patterns, timeout, name=None):
if not name:
name = self.name
return LogWatcher(self.Env["LogFileName"], patterns, name, timeout, kind=self.Env["LogWatcher"], hosts=self.Env["nodes"])
def local_badnews(self, prefix, watch, local_ignore=[]):
errcount = 0
if not prefix:
prefix = "LocalBadNews:"
ignorelist = []
ignorelist.append(" CTS: ")
ignorelist.append(prefix)
ignorelist.extend(local_ignore)
while errcount < 100:
match = watch.look(0)
if match:
add_err = 1
for ignore in ignorelist:
if add_err == 1 and re.search(ignore, match):
add_err = 0
if add_err == 1:
self.logger.log(prefix + " " + match)
errcount = errcount + 1
else:
break
else:
self.logger.log("Too many errors!")
watch.end()
return errcount
def is_applicable(self):
return self.is_applicable_common()
def is_applicable_common(self):
'''Return TRUE if we are applicable in the current test configuration'''
#raise ValueError("Abstract Class member (is_applicable)")
if self.is_loop and not self.Env["loop-tests"]:
return 0
elif self.is_unsafe and not self.Env["unsafe-tests"]:
return 0
elif self.is_valgrind and not self.Env["valgrind-tests"]:
return 0
elif self.is_experimental and not self.Env["experimental-tests"]:
return 0
elif self.is_container and not self.Env["container-tests"]:
return 0
elif self.Env["benchmark"] and self.benchmark == 0:
return 0
return 1
def find_ocfs2_resources(self, node):
self.r_o2cb = None
self.r_ocfs2 = []
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
r = AuditResource(self.CM, line)
if r.rtype == "o2cb" and r.parent != "NA":
self.debug("Found o2cb: %s" % self.r_o2cb)
self.r_o2cb = r.parent
if re.search("^Constraint", line):
c = AuditConstraint(self.CM, line)
if c.type == "rsc_colocation" and c.target == self.r_o2cb:
self.r_ocfs2.append(c.rsc)
self.debug("Found ocfs2 filesystems: %s" % repr(self.r_ocfs2))
return len(self.r_ocfs2)
def canrunnow(self, node):
'''Return TRUE if we can meaningfully run right now'''
return 1
def errorstoignore(self):
'''Return list of errors which are 'normal' and should be ignored'''
return []
class StopTest(CTSTest):
'''Stop (deactivate) the cluster manager on a node'''
def __init__(self, cm):
CTSTest.__init__(self, cm)
self.name = "Stop"
def __call__(self, node):
'''Perform the 'stop' test. '''
self.incr("calls")
if self.CM.ShouldBeStatus[node] != "up":
return self.skipped()
patterns = []
# Technically we should always be able to notice ourselves stopping
patterns.append(self.templates["Pat:We_stopped"] % node)
# Any active node needs to notice this one left
# (note that this won't work if we have multiple partitions)
for other in self.Env["nodes"]:
if self.CM.ShouldBeStatus[other] == "up" and other != node:
patterns.append(self.templates["Pat:They_stopped"] %(other, self.CM.key_for_node(node)))
#self.debug("Checking %s will notice %s left"%(other, node))
watch = self.create_watch(patterns, self.Env["DeadTime"])
watch.setwatch()
if node == self.CM.OurNode:
self.incr("us")
else:
if self.CM.upcount() <= 1:
self.incr("all")
else:
self.incr("them")
self.CM.StopaCM(node)
watch_result = watch.lookforall()
failreason = None
UnmatchedList = "||"
if watch.unmatched:
(_, output) = self.rsh(node, "/bin/ps axf", verbose=1)
for line in output:
self.debug(line)
(_, output) = self.rsh(node, "/usr/sbin/dlm_tool dump 2>/dev/null", verbose=1)
for line in output:
self.debug(line)
for regex in watch.unmatched:
self.logger.log ("ERROR: Shutdown pattern not found: %s" % (regex))
UnmatchedList += regex + "||";
failreason = "Missing shutdown pattern"
self.CM.cluster_stable(self.Env["DeadTime"])
if not watch.unmatched or self.CM.upcount() == 0:
return self.success()
if len(watch.unmatched) >= self.CM.upcount():
return self.failure("no match against (%s)" % UnmatchedList)
if failreason == None:
return self.success()
else:
return self.failure(failreason)
#
# We don't register StopTest because it's better when called by
# another test...
#
class StartTest(CTSTest):
'''Start (activate) the cluster manager on a node'''
def __init__(self, cm, debug=None):
CTSTest.__init__(self,cm)
self.name = "start"
self.debug = debug
def __call__(self, node):
'''Perform the 'start' test. '''
self.incr("calls")
if self.CM.upcount() == 0:
self.incr("us")
else:
self.incr("them")
if self.CM.ShouldBeStatus[node] != "down":
return self.skipped()
elif self.CM.StartaCM(node):
return self.success()
else:
return self.failure("Startup %s on node %s failed"
% (self.Env["Name"], node))
#
# We don't register StartTest because it's better when called by
# another test...
#
class FlipTest(CTSTest):
'''If it's running, stop it. If it's stopped start it.
Overthrow the status quo...
'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "Flip"
self.start = StartTest(cm)
self.stop = StopTest(cm)
def __call__(self, node):
'''Perform the 'Flip' test. '''
self.incr("calls")
if self.CM.ShouldBeStatus[node] == "up":
self.incr("stopped")
ret = self.stop(node)
type = "up->down"
# Give the cluster time to recognize it's gone...
time.sleep(self.Env["StableTime"])
elif self.CM.ShouldBeStatus[node] == "down":
self.incr("started")
ret = self.start(node)
type = "down->up"
else:
return self.skipped()
self.incr(type)
if ret:
return self.success()
else:
return self.failure("%s failure" % type)
# Register FlipTest as a good test to run
AllTestClasses.append(FlipTest)
class RestartTest(CTSTest):
'''Stop and restart a node'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "Restart"
self.start = StartTest(cm)
self.stop = StopTest(cm)
self.benchmark = 1
def __call__(self, node):
'''Perform the 'restart' test. '''
self.incr("calls")
self.incr("node:" + node)
ret1 = 1
if self.CM.StataCM(node):
self.incr("WasStopped")
if not self.start(node):
return self.failure("start (setup) failure: "+node)
self.set_timer()
if not self.stop(node):
return self.failure("stop failure: "+node)
if not self.start(node):
return self.failure("start failure: "+node)
return self.success()
# Register RestartTest as a good test to run
AllTestClasses.append(RestartTest)
class StonithdTest(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self, cm)
self.name = "Stonithd"
self.startall = SimulStartLite(cm)
self.benchmark = 1
def __call__(self, node):
self.incr("calls")
if len(self.Env["nodes"]) < 2:
return self.skipped()
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
is_dc = self.CM.is_node_dc(node)
watchpats = []
watchpats.append(self.templates["Pat:Fencing_ok"] % node)
watchpats.append(self.templates["Pat:NodeFenced"] % node)
if self.Env["at-boot"] == 0:
self.debug("Expecting %s to stay down" % node)
self.CM.ShouldBeStatus[node] = "down"
else:
self.debug("Expecting %s to come up again %d" % (node, self.Env["at-boot"]))
watchpats.append("%s.* S_STARTING -> S_PENDING" % node)
watchpats.append("%s.* S_PENDING -> S_NOT_DC" % node)
watch = self.create_watch(watchpats, 30 + self.Env["DeadTime"] + self.Env["StableTime"] + self.Env["StartTime"])
watch.setwatch()
origin = self.Env.RandomGen.choice(self.Env["nodes"])
(rc, _) = self.rsh(origin, "stonith_admin --reboot %s -VVVVVV" % node)
if rc == 124: # CRM_EX_TIMEOUT
# Look for the patterns, usually this means the required
# device was running on the node to be fenced - or that
# the required devices were in the process of being loaded
# and/or moved
#
# Effectively the node committed suicide so there will be
# no confirmation, but pacemaker should be watching and
# fence the node again
self.logger.log("Fencing command on %s to fence %s timed out" % (origin, node))
elif origin != node and rc != 0:
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
self.debug("Waiting for fenced node to come back up")
self.CM.ns.WaitForAllNodesToComeUp(self.Env["nodes"], 600)
self.logger.log("Fencing command on %s failed to fence %s (rc=%d)" % (origin, node, rc))
elif origin == node and rc != 255:
# 255 == broken pipe, ie. the node was fenced as expected
self.logger.log("Locally originated fencing returned %d" % rc)
self.set_timer("fence")
matched = watch.lookforall()
self.log_timer("fence")
self.set_timer("reform")
if watch.unmatched:
self.logger.log("Patterns not found: " + repr(watch.unmatched))
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
self.debug("Waiting for fenced node to come back up")
self.CM.ns.WaitForAllNodesToComeUp(self.Env["nodes"], 600)
self.debug("Waiting for the cluster to re-stabilize with all nodes")
is_stable = self.CM.cluster_stable(self.Env["StartTime"])
if not matched:
return self.failure("Didn't find all expected patterns")
elif not is_stable:
return self.failure("Cluster did not become stable")
self.log_timer("reform")
return self.success()
def errorstoignore(self):
return [
self.templates["Pat:Fencing_start"] % ".*",
self.templates["Pat:Fencing_ok"] % ".*",
self.templates["Pat:Fencing_active"],
r"error.*: Operation 'reboot' targeting .* by .* for stonith_admin.*: Timer expired",
]
def is_applicable(self):
if not self.is_applicable_common():
return 0
if "DoFencing" in list(self.Env.keys()):
return self.Env["DoFencing"]
return 1
AllTestClasses.append(StonithdTest)
class StartOnebyOne(CTSTest):
'''Start all the nodes ~ one by one'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "StartOnebyOne"
self.stopall = SimulStopLite(cm)
self.start = StartTest(cm)
self.ns = CTS.NodeStatus(cm.Env)
def __call__(self, dummy):
'''Perform the 'StartOnebyOne' test. '''
self.incr("calls")
# We ignore the "node" parameter...
# Shut down all the nodes...
ret = self.stopall(None)
if not ret:
return self.failure("Test setup failed")
failed = []
self.set_timer()
for node in self.Env["nodes"]:
if not self.start(node):
failed.append(node)
if len(failed) > 0:
return self.failure("Some node failed to start: " + repr(failed))
return self.success()
# Register StartOnebyOne as a good test to run
AllTestClasses.append(StartOnebyOne)
class SimulStart(CTSTest):
'''Start all the nodes ~ simultaneously'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "SimulStart"
self.stopall = SimulStopLite(cm)
self.startall = SimulStartLite(cm)
def __call__(self, dummy):
'''Perform the 'SimulStart' test. '''
self.incr("calls")
# We ignore the "node" parameter...
# Shut down all the nodes...
ret = self.stopall(None)
if not ret:
return self.failure("Setup failed")
if not self.startall(None):
return self.failure("Startall failed")
return self.success()
# Register SimulStart as a good test to run
AllTestClasses.append(SimulStart)
class SimulStop(CTSTest):
'''Stop all the nodes ~ simultaneously'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "SimulStop"
self.startall = SimulStartLite(cm)
self.stopall = SimulStopLite(cm)
def __call__(self, dummy):
'''Perform the 'SimulStop' test. '''
self.incr("calls")
# We ignore the "node" parameter...
# Start up all the nodes...
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
if not self.stopall(None):
return self.failure("Stopall failed")
return self.success()
# Register SimulStop as a good test to run
AllTestClasses.append(SimulStop)
class StopOnebyOne(CTSTest):
'''Stop all the nodes in order'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "StopOnebyOne"
self.startall = SimulStartLite(cm)
self.stop = StopTest(cm)
def __call__(self, dummy):
'''Perform the 'StopOnebyOne' test. '''
self.incr("calls")
# We ignore the "node" parameter...
# Start up all the nodes...
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
failed = []
self.set_timer()
for node in self.Env["nodes"]:
if not self.stop(node):
failed.append(node)
if len(failed) > 0:
return self.failure("Some node failed to stop: " + repr(failed))
return self.success()
# Register StopOnebyOne as a good test to run
AllTestClasses.append(StopOnebyOne)
class RestartOnebyOne(CTSTest):
'''Restart all the nodes in order'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "RestartOnebyOne"
self.startall = SimulStartLite(cm)
def __call__(self, dummy):
'''Perform the 'RestartOnebyOne' test. '''
self.incr("calls")
# We ignore the "node" parameter...
# Start up all the nodes...
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
did_fail = []
self.set_timer()
self.restart = RestartTest(self.CM)
for node in self.Env["nodes"]:
if not self.restart(node):
did_fail.append(node)
if did_fail:
return self.failure("Could not restart %d nodes: %s"
% (len(did_fail), repr(did_fail)))
return self.success()
# Register StopOnebyOne as a good test to run
AllTestClasses.append(RestartOnebyOne)
class PartialStart(CTSTest):
'''Start a node - but tell it to stop before it finishes starting up'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "PartialStart"
self.startall = SimulStartLite(cm)
self.stopall = SimulStopLite(cm)
self.stop = StopTest(cm)
#self.is_unsafe = 1
def __call__(self, node):
'''Perform the 'PartialStart' test. '''
self.incr("calls")
ret = self.stopall(None)
if not ret:
return self.failure("Setup failed")
watchpats = []
watchpats.append("pacemaker-controld.*Connecting to .* cluster infrastructure")
watch = self.create_watch(watchpats, self.Env["DeadTime"]+10)
watch.setwatch()
self.CM.StartaCMnoBlock(node)
ret = watch.lookforall()
if not ret:
self.logger.log("Patterns not found: " + repr(watch.unmatched))
return self.failure("Setup of %s failed" % node)
ret = self.stop(node)
if not ret:
return self.failure("%s did not stop in time" % node)
return self.success()
def errorstoignore(self):
'''Return list of errors which should be ignored'''
# We might do some fencing in the 2-node case if we make it up far enough
return [
r"Executing reboot fencing operation",
r"Requesting fencing \([^)]+\) of node ",
]
# Register StopOnebyOne as a good test to run
AllTestClasses.append(PartialStart)
class StandbyTest(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "Standby"
self.benchmark = 1
self.start = StartTest(cm)
self.startall = SimulStartLite(cm)
# make sure the node is active
# set the node to standby mode
# check resources, none resource should be running on the node
# set the node to active mode
# check resouces, resources should have been migrated back (SHOULD THEY?)
def __call__(self, node):
self.incr("calls")
ret = self.startall(None)
if not ret:
return self.failure("Start all nodes failed")
self.debug("Make sure node %s is active" % node)
if self.CM.StandbyStatus(node) != "off":
if not self.CM.SetStandbyMode(node, "off"):
return self.failure("can't set node %s to active mode" % node)
self.CM.cluster_stable()
status = self.CM.StandbyStatus(node)
if status != "off":
return self.failure("standby status of %s is [%s] but we expect [off]" % (node, status))
self.debug("Getting resources running on node %s" % node)
rsc_on_node = self.CM.active_resources(node)
watchpats = []
watchpats.append(r"State transition .* -> S_POLICY_ENGINE")
watch = self.create_watch(watchpats, self.Env["DeadTime"]+10)
watch.setwatch()
self.debug("Setting node %s to standby mode" % node)
if not self.CM.SetStandbyMode(node, "on"):
return self.failure("can't set node %s to standby mode" % node)
self.set_timer("on")
ret = watch.lookforall()
if not ret:
self.logger.log("Patterns not found: " + repr(watch.unmatched))
self.CM.SetStandbyMode(node, "off")
return self.failure("cluster didn't react to standby change on %s" % node)
self.CM.cluster_stable()
status = self.CM.StandbyStatus(node)
if status != "on":
return self.failure("standby status of %s is [%s] but we expect [on]" % (node, status))
self.log_timer("on")
self.debug("Checking resources")
bad_run = self.CM.active_resources(node)
if len(bad_run) > 0:
rc = self.failure("%s set to standby, %s is still running on it" % (node, repr(bad_run)))
self.debug("Setting node %s to active mode" % node)
self.CM.SetStandbyMode(node, "off")
return rc
self.debug("Setting node %s to active mode" % node)
if not self.CM.SetStandbyMode(node, "off"):
return self.failure("can't set node %s to active mode" % node)
self.set_timer("off")
self.CM.cluster_stable()
status = self.CM.StandbyStatus(node)
if status != "off":
return self.failure("standby status of %s is [%s] but we expect [off]" % (node, status))
self.log_timer("off")
return self.success()
AllTestClasses.append(StandbyTest)
class ValgrindTest(CTSTest):
'''Check for memory leaks'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "Valgrind"
self.stopall = SimulStopLite(cm)
self.startall = SimulStartLite(cm)
self.is_valgrind = 1
self.is_loop = 1
def setup(self, node):
self.incr("calls")
ret = self.stopall(None)
if not ret:
return self.failure("Stop all nodes failed")
# @TODO Edit /etc/sysconfig/pacemaker on all nodes to enable valgrind,
# and clear any valgrind logs from previous runs. For now, we rely on
# the user to do this manually.
ret = self.startall(None)
if not ret:
return self.failure("Start all nodes failed")
return self.success()
def teardown(self, node):
# Return all nodes to normal
# @TODO Edit /etc/sysconfig/pacemaker on all nodes to disable valgrind
ret = self.stopall(None)
if not ret:
return self.failure("Stop all nodes failed")
return self.success()
def find_leaks(self):
# Check for leaks
# (no longer used but kept in case feature is restored)
leaked = []
self.stop = StopTest(self.CM)
for node in self.Env["nodes"]:
rc = self.stop(node)
if not rc:
self.failure("Couldn't shut down %s" % node)
(rc, _) = self.rsh(node, "grep -e indirectly.*lost:.*[1-9] -e definitely.*lost:.*[1-9] -e (ERROR|error).*SUMMARY:.*[1-9].*errors %s" % self.logger.logPat)
if rc != 1:
leaked.append(node)
self.failure("Valgrind errors detected on %s" % node)
(_, output) = self.rsh(node, "grep -e lost: -e SUMMARY: %s" % self.logger.logPat, verbose=1)
for line in output:
self.logger.log(line)
(_, output) = self.rsh(node, "cat %s" % self.logger.logPat, verbose=1)
for line in output:
self.debug(line)
self.rsh(node, "rm -f %s" % self.logger.logPat, verbose=1)
return leaked
def __call__(self, node):
#leaked = self.find_leaks()
#if len(leaked) > 0:
# return self.failure("Nodes %s leaked" % repr(leaked))
return self.success()
def errorstoignore(self):
'''Return list of errors which should be ignored'''
return [
r"pacemaker-based.*: \*\*\*\*\*\*\*\*\*\*\*\*\*",
r"pacemaker-based.*: .* avoid confusing Valgrind",
r"HA_VALGRIND_ENABLED",
]
class StandbyLoopTest(ValgrindTest):
'''Check for memory leaks by putting a node in and out of standby for an hour'''
# @TODO This is not a useful test for memory leaks
def __init__(self, cm):
ValgrindTest.__init__(self,cm)
self.name = "StandbyLoop"
def __call__(self, node):
lpc = 0
delay = 2
failed = 0
done = time.time() + self.Env["loop-minutes"] * 60
while time.time() <= done and not failed:
lpc = lpc + 1
time.sleep(delay)
if not self.CM.SetStandbyMode(node, "on"):
self.failure("can't set node %s to standby mode" % node)
failed = lpc
time.sleep(delay)
if not self.CM.SetStandbyMode(node, "off"):
self.failure("can't set node %s to active mode" % node)
failed = lpc
leaked = self.find_leaks()
if failed:
return self.failure("Iteration %d failed" % failed)
elif len(leaked) > 0:
return self.failure("Nodes %s leaked" % repr(leaked))
return self.success()
#AllTestClasses.append(StandbyLoopTest)
class BandwidthTest(CTSTest):
# Tests should not be cluster-manager-specific
# If you need to find out cluster manager configuration to do this, then
# it should be added to the generic cluster manager API.
'''Test the bandwidth which the cluster uses'''
def __init__(self, cm):
CTSTest.__init__(self, cm)
self.name = "Bandwidth"
self.start = StartTest(cm)
self.__setitem__("min",0)
self.__setitem__("max",0)
self.__setitem__("totalbandwidth",0)
(handle, self.tempfile) = tempfile.mkstemp(".cts")
os.close(handle)
self.startall = SimulStartLite(cm)
def __call__(self, node):
'''Perform the Bandwidth test'''
self.incr("calls")
if self.CM.upcount() < 1:
return self.skipped()
Path = self.CM.InternalCommConfig()
if "ip" not in Path["mediatype"]:
return self.skipped()
port = Path["port"][0]
port = int(port)
ret = self.startall(None)
if not ret:
return self.failure("Test setup failed")
time.sleep(5) # We get extra messages right after startup.
fstmpfile = "/var/run/band_estimate"
dumpcmd = "tcpdump -p -n -c 102 -i any udp port %d > %s 2>&1" \
% (port, fstmpfile)
(rc, _) = self.rsh(node, dumpcmd)
if rc == 0:
farfile = "root@%s:%s" % (node, fstmpfile)
- self.rsh.cp(farfile, self.tempfile)
+ self.rsh.copy(farfile, self.tempfile)
Bandwidth = self.countbandwidth(self.tempfile)
if not Bandwidth:
self.logger.log("Could not compute bandwidth.")
return self.success()
intband = int(Bandwidth + 0.5)
self.logger.log("...bandwidth: %d bits/sec" % intband)
self.Stats["totalbandwidth"] = self.Stats["totalbandwidth"] + Bandwidth
if self.Stats["min"] == 0:
self.Stats["min"] = Bandwidth
if Bandwidth > self.Stats["max"]:
self.Stats["max"] = Bandwidth
if Bandwidth < self.Stats["min"]:
self.Stats["min"] = Bandwidth
self.rsh(node, "rm -f %s" % fstmpfile)
os.unlink(self.tempfile)
return self.success()
else:
return self.failure("no response from tcpdump command [%d]!" % rc)
def countbandwidth(self, file):
fp = open(file, "r")
fp.seek(0)
count = 0
sum = 0
while 1:
line = fp.readline()
if not line:
return None
if re.search("udp",line) or re.search("UDP,", line):
count = count + 1
linesplit = line.split(" ")
for j in range(len(linesplit)-1):
if linesplit[j] == "udp": break
if linesplit[j] == "length:": break
try:
sum = sum + int(linesplit[j+1])
except ValueError:
self.logger.log("Invalid tcpdump line: %s" % line)
return None
T1 = linesplit[0]
timesplit = T1.split(":")
time2split = timesplit[2].split(".")
time1 = (int(timesplit[0])*60+int(timesplit[1]))*60+int(time2split[0])+int(time2split[1])*0.000001
break
while count < 100:
line = fp.readline()
if not line:
return None
if re.search("udp",line) or re.search("UDP,", line):
count = count+1
linessplit = line.split(" ")
for j in range(len(linessplit)-1):
if linessplit[j] == "udp": break
if linessplit[j] == "length:": break
try:
sum = int(linessplit[j+1]) + sum
except ValueError:
self.logger.log("Invalid tcpdump line: %s" % line)
return None
T2 = linessplit[0]
timesplit = T2.split(":")
time2split = timesplit[2].split(".")
time2 = (int(timesplit[0])*60+int(timesplit[1]))*60+int(time2split[0])+int(time2split[1])*0.000001
time = time2-time1
if (time <= 0):
return 0
return int((sum*8)/time)
def is_applicable(self):
'''BandwidthTest never applicable'''
return 0
AllTestClasses.append(BandwidthTest)
###################################################################
class MaintenanceMode(CTSTest):
###################################################################
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "MaintenanceMode"
self.start = StartTest(cm)
self.startall = SimulStartLite(cm)
self.max = 30
#self.is_unsafe = 1
self.benchmark = 1
self.action = "asyncmon"
self.interval = 0
self.rid = "maintenanceDummy"
def toggleMaintenanceMode(self, node, action):
pats = []
pats.append(self.templates["Pat:DC_IDLE"])
# fail the resource right after turning Maintenance mode on
# verify it is not recovered until maintenance mode is turned off
if action == "On":
pats.append(self.templates["Pat:RscOpFail"] % (self.action, self.rid))
else:
pats.append(self.templates["Pat:RscOpOK"] % ("stop", self.rid))
pats.append(self.templates["Pat:RscOpOK"] % ("start", self.rid))
watch = self.create_watch(pats, 60)
watch.setwatch()
self.debug("Turning maintenance mode %s" % action)
self.rsh(node, self.templates["MaintenanceMode%s" % (action)])
if (action == "On"):
self.rsh(node, "crm_resource -V -F -r %s -H %s &>/dev/null" % (self.rid, node))
self.set_timer("recover%s" % (action))
watch.lookforall()
self.log_timer("recover%s" % (action))
if watch.unmatched:
self.debug("Failed to find patterns when turning maintenance mode %s" % action)
return repr(watch.unmatched)
return ""
def insertMaintenanceDummy(self, node):
pats = []
pats.append(("%s.*" % node) + (self.templates["Pat:RscOpOK"] % ("start", self.rid)))
watch = self.create_watch(pats, 60)
watch.setwatch()
self.CM.AddDummyRsc(node, self.rid)
self.set_timer("addDummy")
watch.lookforall()
self.log_timer("addDummy")
if watch.unmatched:
self.debug("Failed to find patterns when adding maintenance dummy resource")
return repr(watch.unmatched)
return ""
def removeMaintenanceDummy(self, node):
pats = []
pats.append(self.templates["Pat:RscOpOK"] % ("stop", self.rid))
watch = self.create_watch(pats, 60)
watch.setwatch()
self.CM.RemoveDummyRsc(node, self.rid)
self.set_timer("removeDummy")
watch.lookforall()
self.log_timer("removeDummy")
if watch.unmatched:
self.debug("Failed to find patterns when removing maintenance dummy resource")
return repr(watch.unmatched)
return ""
def managedRscList(self, node):
rscList = []
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
tmp = AuditResource(self.CM, line)
if tmp.managed():
rscList.append(tmp.id)
return rscList
def verifyResources(self, node, rscList, managed):
managedList = list(rscList)
managed_str = "managed"
if not managed:
managed_str = "unmanaged"
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
tmp = AuditResource(self.CM, line)
if managed and not tmp.managed():
continue
elif not managed and tmp.managed():
continue
elif managedList.count(tmp.id):
managedList.remove(tmp.id)
if len(managedList) == 0:
self.debug("Found all %s resources on %s" % (managed_str, node))
return True
self.logger.log("Could not find all %s resources on %s. %s" % (managed_str, node, managedList))
return False
def __call__(self, node):
'''Perform the 'MaintenanceMode' test. '''
self.incr("calls")
verify_managed = False
verify_unmanaged = False
failPat = ""
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
# get a list of all the managed resources. We use this list
# after enabling maintenance mode to verify all managed resources
# become un-managed. After maintenance mode is turned off, we use
# this list to verify all the resources become managed again.
managedResources = self.managedRscList(node)
if len(managedResources) == 0:
self.logger.log("No managed resources on %s" % node)
return self.skipped()
# insert a fake resource we can fail during maintenance mode
# so we can verify recovery does not take place until after maintenance
# mode is disabled.
failPat = failPat + self.insertMaintenanceDummy(node)
# toggle maintenance mode ON, then fail dummy resource.
failPat = failPat + self.toggleMaintenanceMode(node, "On")
# verify all the resources are now unmanaged
if self.verifyResources(node, managedResources, False):
verify_unmanaged = True
# Toggle maintenance mode OFF, verify dummy is recovered.
failPat = failPat + self.toggleMaintenanceMode(node, "Off")
# verify all the resources are now managed again
if self.verifyResources(node, managedResources, True):
verify_managed = True
# Remove our maintenance dummy resource.
failPat = failPat + self.removeMaintenanceDummy(node)
self.CM.cluster_stable()
if failPat != "":
return self.failure("Unmatched patterns: %s" % (failPat))
elif verify_unmanaged is False:
return self.failure("Failed to verify resources became unmanaged during maintenance mode")
elif verify_managed is False:
return self.failure("Failed to verify resources switched back to managed after disabling maintenance mode")
return self.success()
def errorstoignore(self):
'''Return list of errors which should be ignored'''
return [
r"Updating failcount for %s" % self.rid,
r"schedulerd.*: Recover\s+%s\s+\(.*\)" % self.rid,
r"Unknown operation: fail",
self.templates["Pat:RscOpOK"] % (self.action, self.rid),
r"(ERROR|error).*: Action %s_%s_%d .* initiated outside of a transition" % (self.rid, self.action, self.interval),
]
AllTestClasses.append(MaintenanceMode)
class ResourceRecover(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "ResourceRecover"
self.start = StartTest(cm)
self.startall = SimulStartLite(cm)
self.max = 30
self.rid = None
self.rid_alt = None
#self.is_unsafe = 1
self.benchmark = 1
# these are the values used for the new LRM API call
self.action = "asyncmon"
self.interval = 0
def __call__(self, node):
'''Perform the 'ResourceRecover' test. '''
self.incr("calls")
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
# List all resources active on the node (skip test if none)
resourcelist = self.CM.active_resources(node)
if len(resourcelist) == 0:
self.logger.log("No active resources on %s" % node)
return self.skipped()
# Choose one resource at random
rsc = self.choose_resource(node, resourcelist)
if rsc is None:
return self.failure("Could not get details of resource '%s'" % self.rid)
if rsc.id == rsc.clone_id:
self.debug("Failing " + rsc.id)
else:
self.debug("Failing " + rsc.id + " (also known as " + rsc.clone_id + ")")
# Log patterns to watch for (failure, plus restart if managed)
pats = []
pats.append(self.templates["Pat:CloneOpFail"] % (self.action, rsc.id, rsc.clone_id))
if rsc.managed():
pats.append(self.templates["Pat:RscOpOK"] % ("stop", self.rid))
if rsc.unique():
pats.append(self.templates["Pat:RscOpOK"] % ("start", self.rid))
else:
# Anonymous clones may get restarted with a different clone number
pats.append(self.templates["Pat:RscOpOK"] % ("start", ".*"))
# Fail resource. (Ideally, we'd fail it twice, to ensure the fail count
# is incrementing properly, but it might restart on a different node.
# We'd have to temporarily ban it from all other nodes and ensure the
# migration-threshold hasn't been reached.)
if self.fail_resource(rsc, node, pats) is None:
return None # self.failure() already called
return self.success()
def choose_resource(self, node, resourcelist):
""" Choose a random resource to target """
self.rid = self.Env.RandomGen.choice(resourcelist)
self.rid_alt = self.rid
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if line.startswith("Resource: "):
rsc = AuditResource(self.CM, line)
if rsc.id == self.rid:
# Handle anonymous clones that get renamed
self.rid = rsc.clone_id
return rsc
return None
def get_failcount(self, node):
""" Check the fail count of targeted resource on given node """
(rc, lines) = self.rsh(node,
"crm_failcount --quiet --query --resource %s "
"--operation %s --interval %d "
"--node %s" % (self.rid, self.action,
self.interval, node), verbose=1)
if rc != 0 or len(lines) != 1:
self.logger.log("crm_failcount on %s failed (%d): %s" % (node, rc,
" // ".join(map(str.strip, lines))))
return -1
try:
failcount = int(lines[0])
except (IndexError, ValueError):
self.logger.log("crm_failcount output on %s unparseable: %s" % (node,
' '.join(lines)))
return -1
return failcount
def fail_resource(self, rsc, node, pats):
""" Fail the targeted resource, and verify as expected """
orig_failcount = self.get_failcount(node)
watch = self.create_watch(pats, 60)
watch.setwatch()
self.rsh(node, "crm_resource -V -F -r %s -H %s &>/dev/null" % (self.rid, node))
self.set_timer("recover")
watch.lookforall()
self.log_timer("recover")
self.CM.cluster_stable()
recovered = self.CM.ResourceLocation(self.rid)
if watch.unmatched:
return self.failure("Patterns not found: %s" % repr(watch.unmatched))
elif rsc.unique() and len(recovered) > 1:
return self.failure("%s is now active on more than one node: %s"%(self.rid, repr(recovered)))
elif len(recovered) > 0:
self.debug("%s is running on: %s" % (self.rid, repr(recovered)))
elif rsc.managed():
return self.failure("%s was not recovered and is inactive" % self.rid)
new_failcount = self.get_failcount(node)
if new_failcount != (orig_failcount + 1):
return self.failure("%s fail count is %d not %d" % (self.rid,
new_failcount, orig_failcount + 1))
return 0 # Anything but None is success
def errorstoignore(self):
'''Return list of errors which should be ignored'''
return [
r"Updating failcount for %s" % self.rid,
r"schedulerd.*: Recover\s+(%s|%s)\s+\(.*\)" % (self.rid, self.rid_alt),
r"Unknown operation: fail",
self.templates["Pat:RscOpOK"] % (self.action, self.rid),
r"(ERROR|error).*: Action %s_%s_%d .* initiated outside of a transition" % (self.rid, self.action, self.interval),
]
AllTestClasses.append(ResourceRecover)
class ComponentFail(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "ComponentFail"
self.startall = SimulStartLite(cm)
self.complist = cm.Components()
self.patterns = []
self.okerrpatterns = []
self.is_unsafe = 1
def __call__(self, node):
'''Perform the 'ComponentFail' test. '''
self.incr("calls")
self.patterns = []
self.okerrpatterns = []
# start all nodes
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
if not self.CM.cluster_stable(self.Env["StableTime"]):
return self.failure("Setup failed - unstable")
node_is_dc = self.CM.is_node_dc(node, None)
# select a component to kill
chosen = self.Env.RandomGen.choice(self.complist)
while chosen.dc_only == 1 and node_is_dc == 0:
chosen = self.Env.RandomGen.choice(self.complist)
self.debug("...component %s (dc=%d,boot=%d)" % (chosen.name, node_is_dc,chosen.triggersreboot))
self.incr(chosen.name)
if chosen.name != "corosync":
self.patterns.append(self.templates["Pat:ChildKilled"] %(node, chosen.name))
self.patterns.append(self.templates["Pat:ChildRespawn"] %(node, chosen.name))
self.patterns.extend(chosen.pats)
if node_is_dc:
self.patterns.extend(chosen.dc_pats)
# @TODO this should be a flag in the Component
if chosen.name in [ "corosync", "pacemaker-based", "pacemaker-fenced" ]:
# Ignore actions for fence devices if fencer will respawn
# (their registration will be lost, and probes will fail)
self.okerrpatterns = [ self.templates["Pat:Fencing_active"] ]
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
r = AuditResource(self.CM, line)
if r.rclass == "stonith":
self.okerrpatterns.append(self.templates["Pat:Fencing_recover"] % r.id)
self.okerrpatterns.append(self.templates["Pat:Fencing_probe"] % r.id)
# supply a copy so self.patterns doesn't end up empty
tmpPats = []
tmpPats.extend(self.patterns)
self.patterns.extend(chosen.badnews_ignore)
# Look for STONITH ops, depending on Env["at-boot"] we might need to change the nodes status
stonithPats = []
stonithPats.append(self.templates["Pat:Fencing_ok"] % node)
stonith = self.create_watch(stonithPats, 0)
stonith.setwatch()
# set the watch for stable
watch = self.create_watch(
tmpPats, self.Env["DeadTime"] + self.Env["StableTime"] + self.Env["StartTime"])
watch.setwatch()
# kill the component
chosen.kill(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
self.debug("Waiting for any fenced node to come back up")
self.CM.ns.WaitForAllNodesToComeUp(self.Env["nodes"], 600)
self.debug("Waiting for the cluster to re-stabilize with all nodes")
self.CM.cluster_stable(self.Env["StartTime"])
self.debug("Checking if %s was shot" % node)
shot = stonith.look(60)
if shot:
self.debug("Found: " + repr(shot))
self.okerrpatterns.append(self.templates["Pat:Fencing_start"] % node)
if self.Env["at-boot"] == 0:
self.CM.ShouldBeStatus[node] = "down"
# If fencing occurred, chances are many (if not all) the expected logs
# will not be sent - or will be lost when the node reboots
return self.success()
# check for logs indicating a graceful recovery
matched = watch.lookforall(allow_multiple_matches=1)
if watch.unmatched:
self.logger.log("Patterns not found: " + repr(watch.unmatched))
self.debug("Waiting for the cluster to re-stabilize with all nodes")
is_stable = self.CM.cluster_stable(self.Env["StartTime"])
if not matched:
return self.failure("Didn't find all expected %s patterns" % chosen.name)
elif not is_stable:
return self.failure("Cluster did not become stable after killing %s" % chosen.name)
return self.success()
def errorstoignore(self):
'''Return list of errors which should be ignored'''
# Note that okerrpatterns refers to the last time we ran this test
# The good news is that this works fine for us...
self.okerrpatterns.extend(self.patterns)
return self.okerrpatterns
AllTestClasses.append(ComponentFail)
class SplitBrainTest(CTSTest):
'''It is used to test split-brain. when the path between the two nodes break
check the two nodes both take over the resource'''
def __init__(self,cm):
CTSTest.__init__(self,cm)
self.name = "SplitBrain"
self.start = StartTest(cm)
self.startall = SimulStartLite(cm)
self.is_experimental = 1
def isolate_partition(self, partition):
other_nodes = []
other_nodes.extend(self.Env["nodes"])
for node in partition:
try:
other_nodes.remove(node)
except ValueError:
self.logger.log("Node "+node+" not in " + repr(self.Env["nodes"]) + " from " +repr(partition))
if len(other_nodes) == 0:
return 1
self.debug("Creating partition: " + repr(partition))
self.debug("Everyone else: " + repr(other_nodes))
for node in partition:
if not self.CM.isolate_node(node, other_nodes):
self.logger.log("Could not isolate %s" % node)
return 0
return 1
def heal_partition(self, partition):
other_nodes = []
other_nodes.extend(self.Env["nodes"])
for node in partition:
try:
other_nodes.remove(node)
except ValueError:
self.logger.log("Node "+node+" not in " + repr(self.Env["nodes"]))
if len(other_nodes) == 0:
return 1
self.debug("Healing partition: " + repr(partition))
self.debug("Everyone else: " + repr(other_nodes))
for node in partition:
self.CM.unisolate_node(node, other_nodes)
def __call__(self, node):
'''Perform split-brain test'''
self.incr("calls")
self.passed = 1
partitions = {}
ret = self.startall(None)
if not ret:
return self.failure("Setup failed")
while 1:
# Retry until we get multiple partitions
partitions = {}
p_max = len(self.Env["nodes"])
for node in self.Env["nodes"]:
p = self.Env.RandomGen.randint(1, p_max)
if not p in partitions:
partitions[p] = []
partitions[p].append(node)
p_max = len(list(partitions.keys()))
if p_max > 1:
break
# else, try again
self.debug("Created %d partitions" % p_max)
for key in list(partitions.keys()):
self.debug("Partition["+str(key)+"]:\t"+repr(partitions[key]))
# Disabling STONITH to reduce test complexity for now
self.rsh(node, "crm_attribute -V -n stonith-enabled -v false")
for key in list(partitions.keys()):
self.isolate_partition(partitions[key])
count = 30
while count > 0:
if len(self.CM.find_partitions()) != p_max:
time.sleep(10)
else:
break
else:
self.failure("Expected partitions were not created")
# Target number of partitions formed - wait for stability
if not self.CM.cluster_stable():
self.failure("Partitioned cluster not stable")
# Now audit the cluster state
self.CM.partitions_expected = p_max
if not self.audit():
self.failure("Audits failed")
self.CM.partitions_expected = 1
# And heal them again
for key in list(partitions.keys()):
self.heal_partition(partitions[key])
# Wait for a single partition to form
count = 30
while count > 0:
if len(self.CM.find_partitions()) != 1:
time.sleep(10)
count -= 1
else:
break
else:
self.failure("Cluster did not reform")
# Wait for it to have the right number of members
count = 30
while count > 0:
members = []
partitions = self.CM.find_partitions()
if len(partitions) > 0:
members = partitions[0].split()
if len(members) != len(self.Env["nodes"]):
time.sleep(10)
count -= 1
else:
break
else:
self.failure("Cluster did not completely reform")
# Wait up to 20 minutes - the delay is more preferable than
# trying to continue with in a messed up state
if not self.CM.cluster_stable(1200):
self.failure("Reformed cluster not stable")
if self.Env["continue"] == 1:
answer = "Y"
else:
try:
answer = input('Continue? [nY]')
except EOFError as e:
answer = "n"
if answer and answer == "n":
raise ValueError("Reformed cluster not stable")
# Turn fencing back on
if self.Env["DoFencing"]:
self.rsh(node, "crm_attribute -V -D -n stonith-enabled")
self.CM.cluster_stable()
if self.passed:
return self.success()
return self.failure("See previous errors")
def errorstoignore(self):
'''Return list of errors which are 'normal' and should be ignored'''
return [
r"Another DC detected:",
r"(ERROR|error).*: .*Application of an update diff failed",
r"pacemaker-controld.*:.*not in our membership list",
r"CRIT:.*node.*returning after partition",
]
def is_applicable(self):
if not self.is_applicable_common():
return 0
return len(self.Env["nodes"]) > 2
AllTestClasses.append(SplitBrainTest)
class Reattach(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "Reattach"
self.startall = SimulStartLite(cm)
self.restart1 = RestartTest(cm)
self.stopall = SimulStopLite(cm)
self.is_unsafe = 0 # Handled by canrunnow()
def _is_managed(self, node):
(_, is_managed) = self.rsh(node, "crm_attribute -t rsc_defaults -n is-managed -q -G -d true", verbose=1)
is_managed = is_managed[0].strip()
return is_managed == "true"
def _set_unmanaged(self, node):
self.debug("Disable resource management")
self.rsh(node, "crm_attribute -t rsc_defaults -n is-managed -v false")
def _set_managed(self, node):
self.debug("Re-enable resource management")
self.rsh(node, "crm_attribute -t rsc_defaults -n is-managed -D")
def setup(self, node):
attempt = 0
if not self.startall(None):
return None
# Make sure we are really _really_ stable and that all
# resources, including those that depend on transient node
# attributes, are started
while not self.CM.cluster_stable(double_check=True):
if attempt < 5:
attempt += 1
self.debug("Not stable yet, re-testing")
else:
self.logger.log("Cluster is not stable")
return None
return 1
def teardown(self, node):
# Make sure 'node' is up
start = StartTest(self.CM)
start(node)
if not self._is_managed(node):
self.logger.log("Attempting to re-enable resource management on %s" % node)
self._set_managed(node)
self.CM.cluster_stable()
if not self._is_managed(node):
self.logger.log("Could not re-enable resource management")
return 0
return 1
def canrunnow(self, node):
'''Return TRUE if we can meaningfully run right now'''
if self.find_ocfs2_resources(node):
self.logger.log("Detach/Reattach scenarios are not possible with OCFS2 services present")
return 0
return 1
def __call__(self, node):
self.incr("calls")
pats = []
# Conveniently, the scheduler will display this message when disabling
# management, even if fencing is not enabled, so we can rely on it.
managed = self.create_watch(["No fencing will be done"], 60)
managed.setwatch()
self._set_unmanaged(node)
if not managed.lookforall():
self.logger.log("Patterns not found: " + repr(managed.unmatched))
return self.failure("Resource management not disabled")
pats = []
pats.append(self.templates["Pat:RscOpOK"] % ("start", ".*"))
pats.append(self.templates["Pat:RscOpOK"] % ("stop", ".*"))
pats.append(self.templates["Pat:RscOpOK"] % ("promote", ".*"))
pats.append(self.templates["Pat:RscOpOK"] % ("demote", ".*"))
pats.append(self.templates["Pat:RscOpOK"] % ("migrate", ".*"))
watch = self.create_watch(pats, 60, "ShutdownActivity")
watch.setwatch()
self.debug("Shutting down the cluster")
ret = self.stopall(None)
if not ret:
self._set_managed(node)
return self.failure("Couldn't shut down the cluster")
self.debug("Bringing the cluster back up")
ret = self.startall(None)
time.sleep(5) # allow ping to update the CIB
if not ret:
self._set_managed(node)
return self.failure("Couldn't restart the cluster")
if self.local_badnews("ResourceActivity:", watch):
self._set_managed(node)
return self.failure("Resources stopped or started during cluster restart")
watch = self.create_watch(pats, 60, "StartupActivity")
watch.setwatch()
# Re-enable resource management (and verify it happened).
self._set_managed(node)
self.CM.cluster_stable()
if not self._is_managed(node):
return self.failure("Could not re-enable resource management")
# Ignore actions for STONITH resources
ignore = []
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
r = AuditResource(self.CM, line)
if r.rclass == "stonith":
self.debug("Ignoring start actions for %s" % r.id)
ignore.append(self.templates["Pat:RscOpOK"] % ("start", r.id))
if self.local_badnews("ResourceActivity:", watch, ignore):
return self.failure("Resources stopped or started after resource management was re-enabled")
return ret
def errorstoignore(self):
'''Return list of errors which should be ignored'''
return [
r"resource( was|s were) active at shutdown",
]
def is_applicable(self):
return 1
AllTestClasses.append(Reattach)
class SpecialTest1(CTSTest):
'''Set up a custom test to cause quorum failure issues for Andrew'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "SpecialTest1"
self.startall = SimulStartLite(cm)
self.restart1 = RestartTest(cm)
self.stopall = SimulStopLite(cm)
def __call__(self, node):
'''Perform the 'SpecialTest1' test for Andrew. '''
self.incr("calls")
# Shut down all the nodes...
ret = self.stopall(None)
if not ret:
return self.failure("Could not stop all nodes")
# Test config recovery when the other nodes come up
self.rsh(node, "rm -f " + BuildOptions.CIB_DIR + "/cib*")
# Start the selected node
ret = self.restart1(node)
if not ret:
return self.failure("Could not start "+node)
# Start all remaining nodes
ret = self.startall(None)
if not ret:
return self.failure("Could not start the remaining nodes")
return self.success()
def errorstoignore(self):
'''Return list of errors which should be ignored'''
# Errors that occur as a result of the CIB being wiped
return [
r"error.*: v1 patchset error, patch failed to apply: Application of an update diff failed",
r"error.*: Resource start-up disabled since no STONITH resources have been defined",
r"error.*: Either configure some or disable STONITH with the stonith-enabled option",
r"error.*: NOTE: Clusters with shared data need STONITH to ensure data integrity",
]
AllTestClasses.append(SpecialTest1)
class HAETest(CTSTest):
'''Set up a custom test to cause quorum failure issues for Andrew'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "HAETest"
self.stopall = SimulStopLite(cm)
self.startall = SimulStartLite(cm)
self.is_loop = 1
def setup(self, node):
# Start all remaining nodes
ret = self.startall(None)
if not ret:
return self.failure("Couldn't start all nodes")
return self.success()
def teardown(self, node):
# Stop everything
ret = self.stopall(None)
if not ret:
return self.failure("Couldn't stop all nodes")
return self.success()
def wait_on_state(self, node, resource, expected_clones, attempts=240):
while attempts > 0:
active = 0
(rc, lines) = self.rsh(node, "crm_resource -r %s -W -Q" % resource, verbose=1)
# Hack until crm_resource does the right thing
if rc == 0 and lines:
active = len(lines)
if len(lines) == expected_clones:
return 1
elif rc == 1:
self.debug("Resource %s is still inactive" % resource)
elif rc == 234:
self.logger.log("Unknown resource %s" % resource)
return 0
elif rc == 246:
self.logger.log("Cluster is inactive")
return 0
elif rc != 0:
self.logger.log("Call to crm_resource failed, rc=%d" % rc)
return 0
else:
self.debug("Resource %s is active on %d times instead of %d" % (resource, active, expected_clones))
attempts -= 1
time.sleep(1)
return 0
def find_dlm(self, node):
self.r_dlm = None
(_, lines) = self.rsh(node, "crm_resource -c", verbose=1)
for line in lines:
if re.search("^Resource", line):
r = AuditResource(self.CM, line)
if r.rtype == "controld" and r.parent != "NA":
self.debug("Found dlm: %s" % self.r_dlm)
self.r_dlm = r.parent
return 1
return 0
def find_hae_resources(self, node):
self.r_dlm = None
self.r_o2cb = None
self.r_ocfs2 = []
if self.find_dlm(node):
self.find_ocfs2_resources(node)
def is_applicable(self):
if not self.is_applicable_common():
return 0
if self.Env["Schema"] == "hae":
return 1
return None
class HAERoleTest(HAETest):
def __init__(self, cm):
'''Lars' mount/unmount test for the HA extension. '''
HAETest.__init__(self,cm)
self.name = "HAERoleTest"
def change_state(self, node, resource, target):
(rc, _) = self.rsh(node, "crm_resource -V -r %s -p target-role -v %s --meta" % (resource, target))
return rc
def __call__(self, node):
self.incr("calls")
lpc = 0
failed = 0
delay = 2
done = time.time() + self.Env["loop-minutes"]*60
self.find_hae_resources(node)
clone_max = len(self.Env["nodes"])
while time.time() <= done and not failed:
lpc = lpc + 1
self.change_state(node, self.r_dlm, "Stopped")
if not self.wait_on_state(node, self.r_dlm, 0):
self.failure("%s did not go down correctly" % self.r_dlm)
failed = lpc
self.change_state(node, self.r_dlm, "Started")
if not self.wait_on_state(node, self.r_dlm, clone_max):
self.failure("%s did not come up correctly" % self.r_dlm)
failed = lpc
if not self.wait_on_state(node, self.r_o2cb, clone_max):
self.failure("%s did not come up correctly" % self.r_o2cb)
failed = lpc
for fs in self.r_ocfs2:
if not self.wait_on_state(node, fs, clone_max):
self.failure("%s did not come up correctly" % fs)
failed = lpc
if failed:
return self.failure("iteration %d failed" % failed)
return self.success()
AllTestClasses.append(HAERoleTest)
class HAEStandbyTest(HAETest):
'''Set up a custom test to cause quorum failure issues for Andrew'''
def __init__(self, cm):
HAETest.__init__(self,cm)
self.name = "HAEStandbyTest"
def change_state(self, node, resource, target):
(rc, _) = self.rsh(node, "crm_standby -V -l reboot -v %s" % (target))
return rc
def __call__(self, node):
self.incr("calls")
lpc = 0
failed = 0
done = time.time() + self.Env["loop-minutes"]*60
self.find_hae_resources(node)
clone_max = len(self.Env["nodes"])
while time.time() <= done and not failed:
lpc = lpc + 1
self.change_state(node, self.r_dlm, "true")
if not self.wait_on_state(node, self.r_dlm, clone_max-1):
self.failure("%s did not go down correctly" % self.r_dlm)
failed = lpc
self.change_state(node, self.r_dlm, "false")
if not self.wait_on_state(node, self.r_dlm, clone_max):
self.failure("%s did not come up correctly" % self.r_dlm)
failed = lpc
if not self.wait_on_state(node, self.r_o2cb, clone_max):
self.failure("%s did not come up correctly" % self.r_o2cb)
failed = lpc
for fs in self.r_ocfs2:
if not self.wait_on_state(node, fs, clone_max):
self.failure("%s did not come up correctly" % fs)
failed = lpc
if failed:
return self.failure("iteration %d failed" % failed)
return self.success()
AllTestClasses.append(HAEStandbyTest)
class NearQuorumPointTest(CTSTest):
'''
This test brings larger clusters near the quorum point (50%).
In addition, it will test doing starts and stops at the same time.
Here is how I think it should work:
- loop over the nodes and decide randomly which will be up and which
will be down Use a 50% probability for each of up/down.
- figure out what to do to get into that state from the current state
- in parallel, bring up those going up and bring those going down.
'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "NearQuorumPoint"
def __call__(self, dummy):
'''Perform the 'NearQuorumPoint' test. '''
self.incr("calls")
startset = []
stopset = []
stonith = self.CM.prepare_fencing_watcher("NearQuorumPoint")
#decide what to do with each node
for node in self.Env["nodes"]:
action = self.Env.RandomGen.choice(["start","stop"])
#action = self.Env.RandomGen.choice(["start","stop","no change"])
if action == "start" :
startset.append(node)
elif action == "stop" :
stopset.append(node)
self.debug("start nodes:" + repr(startset))
self.debug("stop nodes:" + repr(stopset))
#add search patterns
watchpats = [ ]
for node in stopset:
if self.CM.ShouldBeStatus[node] == "up":
watchpats.append(self.templates["Pat:We_stopped"] % node)
for node in startset:
if self.CM.ShouldBeStatus[node] == "down":
#watchpats.append(self.templates["Pat:NonDC_started"] % node)
watchpats.append(self.templates["Pat:Local_started"] % node)
else:
for stopping in stopset:
if self.CM.ShouldBeStatus[stopping] == "up":
watchpats.append(self.templates["Pat:They_stopped"] % (node, self.CM.key_for_node(stopping)))
if len(watchpats) == 0:
return self.skipped()
if len(startset) != 0:
watchpats.append(self.templates["Pat:DC_IDLE"])
watch = self.create_watch(watchpats, self.Env["DeadTime"]+10)
watch.setwatch()
#begin actions
for node in stopset:
if self.CM.ShouldBeStatus[node] == "up":
self.CM.StopaCMnoBlock(node)
for node in startset:
if self.CM.ShouldBeStatus[node] == "down":
self.CM.StartaCMnoBlock(node)
#get the result
if watch.lookforall():
self.CM.cluster_stable()
self.CM.fencing_cleanup("NearQuorumPoint", stonith)
return self.success()
self.logger.log("Warn: Patterns not found: " + repr(watch.unmatched))
#get the "bad" nodes
upnodes = []
for node in stopset:
if self.CM.StataCM(node) == 1:
upnodes.append(node)
downnodes = []
for node in startset:
if self.CM.StataCM(node) == 0:
downnodes.append(node)
self.CM.fencing_cleanup("NearQuorumPoint", stonith)
if upnodes == [] and downnodes == []:
self.CM.cluster_stable()
# Make sure they're completely down with no residule
for node in stopset:
self.rsh(node, self.templates["StopCmd"])
return self.success()
if len(upnodes) > 0:
self.logger.log("Warn: Unstoppable nodes: " + repr(upnodes))
if len(downnodes) > 0:
self.logger.log("Warn: Unstartable nodes: " + repr(downnodes))
return self.failure()
def is_applicable(self):
return 1
AllTestClasses.append(NearQuorumPointTest)
class RollingUpgradeTest(CTSTest):
'''Perform a rolling upgrade of the cluster'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "RollingUpgrade"
self.start = StartTest(cm)
self.stop = StopTest(cm)
self.stopall = SimulStopLite(cm)
self.startall = SimulStartLite(cm)
def setup(self, node):
# Start all remaining nodes
ret = self.stopall(None)
if not ret:
return self.failure("Couldn't stop all nodes")
for node in self.Env["nodes"]:
if not self.downgrade(node, None):
return self.failure("Couldn't downgrade %s" % node)
ret = self.startall(None)
if not ret:
return self.failure("Couldn't start all nodes")
return self.success()
def teardown(self, node):
# Stop everything
ret = self.stopall(None)
if not ret:
return self.failure("Couldn't stop all nodes")
for node in self.Env["nodes"]:
if not self.upgrade(node, None):
return self.failure("Couldn't upgrade %s" % node)
return self.success()
def install(self, node, version, start=1, flags="--force"):
target_dir = "/tmp/rpm-%s" % version
src_dir = "%s/%s" % (self.Env["rpm-dir"], version)
self.logger.log("Installing %s on %s with %s" % (version, node, flags))
if not self.stop(node):
return self.failure("stop failure: "+node)
self.rsh(node, "mkdir -p %s" % target_dir)
self.rsh(node, "rm -f %s/*.rpm" % target_dir)
(_, lines) = self.rsh(node, "ls -1 %s/*.rpm" % src_dir, verbose=1)
for line in lines:
line = line[:-1]
- rc = self.rsh.cp("%s" % (line), "%s:%s/" % (node, target_dir))
+ rc = self.rsh.copy("%s" % (line), "%s:%s/" % (node, target_dir))
self.rsh(node, "rpm -Uvh %s %s/*.rpm" % (flags, target_dir))
if start and not self.start(node):
return self.failure("start failure: "+node)
return self.success()
def upgrade(self, node, start=1):
return self.install(node, self.Env["current-version"], start)
def downgrade(self, node, start=1):
return self.install(node, self.Env["previous-version"], start, "--force --nodeps")
def __call__(self, node):
'''Perform the 'Rolling Upgrade' test. '''
self.incr("calls")
for node in self.Env["nodes"]:
if self.upgrade(node):
return self.failure("Couldn't upgrade %s" % node)
self.CM.cluster_stable()
return self.success()
def is_applicable(self):
if not self.is_applicable_common():
return None
if not "rpm-dir" in list(self.Env.keys()):
return None
if not "current-version" in list(self.Env.keys()):
return None
if not "previous-version" in list(self.Env.keys()):
return None
return 1
# Register RestartTest as a good test to run
AllTestClasses.append(RollingUpgradeTest)
class BSC_AddResource(CTSTest):
'''Add a resource to the cluster'''
def __init__(self, cm):
CTSTest.__init__(self, cm)
self.name = "AddResource"
self.resource_offset = 0
self.cib_cmd = """cibadmin -C -o %s -X '%s' """
def __call__(self, node):
self.incr("calls")
self.resource_offset = self.resource_offset + 1
r_id = "bsc-rsc-%s-%d" % (node, self.resource_offset)
start_pat = "pacemaker-controld.*%s_start_0.*confirmed.*ok"
patterns = []
patterns.append(start_pat % r_id)
watch = self.create_watch(patterns, self.Env["DeadTime"])
watch.setwatch()
ip = self.NextIP()
if not self.make_ip_resource(node, r_id, "ocf", "IPaddr", ip):
return self.failure("Make resource %s failed" % r_id)
failed = 0
watch_result = watch.lookforall()
if watch.unmatched:
for regex in watch.unmatched:
self.logger.log ("Warn: Pattern not found: %s" % (regex))
failed = 1
if failed:
return self.failure("Resource pattern(s) not found")
if not self.CM.cluster_stable(self.Env["DeadTime"]):
return self.failure("Unstable cluster")
return self.success()
def NextIP(self):
ip = self.Env["IPBase"]
if ":" in ip:
fields = ip.rpartition(":")
fields[2] = str(hex(int(fields[2], 16)+1))
print(str(hex(int(f[2], 16)+1)))
else:
fields = ip.rpartition('.')
fields[2] = str(int(fields[2])+1)
ip = fields[0] + fields[1] + fields[3];
self.Env["IPBase"] = ip
return ip.strip()
def make_ip_resource(self, node, id, rclass, type, ip):
self.logger.log("Creating %s:%s:%s (%s) on %s" % (rclass,type,id,ip,node))
rsc_xml="""
""" % (id, rclass, type, id, id, ip)
node_constraint = """
""" % (id, id, id, id, node)
rc = 0
(rc, _) = self.rsh(node, self.cib_cmd % ("constraints", node_constraint), verbose=1)
if rc != 0:
self.logger.log("Constraint creation failed: %d" % rc)
return None
(rc, _) = self.rsh(node, self.cib_cmd % ("resources", rsc_xml), verbose=1)
if rc != 0:
self.logger.log("Resource creation failed: %d" % rc)
return None
return 1
def is_applicable(self):
if self.Env["DoBSC"]:
return 1
return None
AllTestClasses.append(BSC_AddResource)
class SimulStopLite(CTSTest):
'''Stop any active nodes ~ simultaneously'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "SimulStopLite"
def __call__(self, dummy):
'''Perform the 'SimulStopLite' setup work. '''
self.incr("calls")
self.debug("Setup: " + self.name)
# We ignore the "node" parameter...
watchpats = [ ]
for node in self.Env["nodes"]:
if self.CM.ShouldBeStatus[node] == "up":
self.incr("WasStarted")
watchpats.append(self.templates["Pat:We_stopped"] % node)
if len(watchpats) == 0:
return self.success()
# Stop all the nodes - at about the same time...
watch = self.create_watch(watchpats, self.Env["DeadTime"]+10)
watch.setwatch()
self.set_timer()
for node in self.Env["nodes"]:
if self.CM.ShouldBeStatus[node] == "up":
self.CM.StopaCMnoBlock(node)
if watch.lookforall():
# Make sure they're completely down with no residule
for node in self.Env["nodes"]:
self.rsh(node, self.templates["StopCmd"])
return self.success()
did_fail = 0
up_nodes = []
for node in self.Env["nodes"]:
if self.CM.StataCM(node) == 1:
did_fail = 1
up_nodes.append(node)
if did_fail:
return self.failure("Active nodes exist: " + repr(up_nodes))
self.logger.log("Warn: All nodes stopped but CTS didn't detect: "
+ repr(watch.unmatched))
return self.failure("Missing log message: "+repr(watch.unmatched))
def is_applicable(self):
'''SimulStopLite is a setup test and never applicable'''
return 0
class SimulStartLite(CTSTest):
'''Start any stopped nodes ~ simultaneously'''
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "SimulStartLite"
def __call__(self, dummy):
'''Perform the 'SimulStartList' setup work. '''
self.incr("calls")
self.debug("Setup: " + self.name)
# We ignore the "node" parameter...
node_list = []
for node in self.Env["nodes"]:
if self.CM.ShouldBeStatus[node] == "down":
self.incr("WasStopped")
node_list.append(node)
self.set_timer()
while len(node_list) > 0:
# Repeat until all nodes come up
watchpats = [ ]
uppat = self.templates["Pat:NonDC_started"]
if self.CM.upcount() == 0:
uppat = self.templates["Pat:Local_started"]
watchpats.append(self.templates["Pat:DC_IDLE"])
for node in node_list:
watchpats.append(uppat % node)
watchpats.append(self.templates["Pat:InfraUp"] % node)
watchpats.append(self.templates["Pat:PacemakerUp"] % node)
# Start all the nodes - at about the same time...
watch = self.create_watch(watchpats, self.Env["DeadTime"]+10)
watch.setwatch()
stonith = self.CM.prepare_fencing_watcher(self.name)
for node in node_list:
self.CM.StartaCMnoBlock(node)
watch.lookforall()
node_list = self.CM.fencing_cleanup(self.name, stonith)
if node_list == None:
return self.failure("Cluster did not stabilize")
# Remove node_list messages from watch.unmatched
for node in node_list:
self.logger.debug("Dealing with stonith operations for %s" % repr(node_list))
if watch.unmatched:
try:
watch.unmatched.remove(uppat % node)
except:
self.debug("Already matched: %s" % (uppat % node))
try:
watch.unmatched.remove(self.templates["Pat:InfraUp"] % node)
except:
self.debug("Already matched: %s" % (self.templates["Pat:InfraUp"] % node))
try:
watch.unmatched.remove(self.templates["Pat:PacemakerUp"] % node)
except:
self.debug("Already matched: %s" % (self.templates["Pat:PacemakerUp"] % node))
if watch.unmatched:
for regex in watch.unmatched:
self.logger.log ("Warn: Startup pattern not found: %s" %(regex))
if not self.CM.cluster_stable():
return self.failure("Cluster did not stabilize")
did_fail = 0
unstable = []
for node in self.Env["nodes"]:
if self.CM.StataCM(node) == 0:
did_fail = 1
unstable.append(node)
if did_fail:
return self.failure("Unstarted nodes exist: " + repr(unstable))
unstable = []
for node in self.Env["nodes"]:
if not self.CM.node_stable(node):
did_fail = 1
unstable.append(node)
if did_fail:
return self.failure("Unstable cluster nodes exist: " + repr(unstable))
return self.success()
def is_applicable(self):
'''SimulStartLite is a setup test and never applicable'''
return 0
def TestList(cm, audits):
result = []
for testclass in AllTestClasses:
bound_test = testclass(cm)
if bound_test.is_applicable():
bound_test.Audits = audits
result.append(bound_test)
return result
class RemoteLXC(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = "RemoteLXC"
self.start = StartTest(cm)
self.startall = SimulStartLite(cm)
self.num_containers = 2
self.is_container = 1
self.failed = 0
self.fail_string = ""
def start_lxc_simple(self, node):
# restore any artifacts laying around from a previous test.
self.rsh(node, "/usr/share/pacemaker/tests/cts/lxc_autogen.sh -s -R &>/dev/null")
# generate the containers, put them in the config, add some resources to them
pats = [ ]
watch = self.create_watch(pats, 120)
watch.setwatch()
pats.append(self.templates["Pat:RscOpOK"] % ("start", "lxc1"))
pats.append(self.templates["Pat:RscOpOK"] % ("start", "lxc2"))
pats.append(self.templates["Pat:RscOpOK"] % ("start", "lxc-ms"))
pats.append(self.templates["Pat:RscOpOK"] % ("promote", "lxc-ms"))
self.rsh(node, "/usr/share/pacemaker/tests/cts/lxc_autogen.sh -g -a -m -s -c %d &>/dev/null" % self.num_containers)
self.set_timer("remoteSimpleInit")
watch.lookforall()
self.log_timer("remoteSimpleInit")
if watch.unmatched:
self.fail_string = "Unmatched patterns: %s" % (repr(watch.unmatched))
self.failed = 1
def cleanup_lxc_simple(self, node):
pats = [ ]
# if the test failed, attempt to clean up the cib and libvirt environment
# as best as possible
if self.failed == 1:
# restore libvirt and cib
self.rsh(node, "/usr/share/pacemaker/tests/cts/lxc_autogen.sh -s -R &>/dev/null")
return
watch = self.create_watch(pats, 120)
watch.setwatch()
pats.append(self.templates["Pat:RscOpOK"] % ("stop", "container1"))
pats.append(self.templates["Pat:RscOpOK"] % ("stop", "container2"))
self.rsh(node, "/usr/share/pacemaker/tests/cts/lxc_autogen.sh -p &>/dev/null")
self.set_timer("remoteSimpleCleanup")
watch.lookforall()
self.log_timer("remoteSimpleCleanup")
if watch.unmatched:
self.fail_string = "Unmatched patterns: %s" % (repr(watch.unmatched))
self.failed = 1
# cleanup libvirt
self.rsh(node, "/usr/share/pacemaker/tests/cts/lxc_autogen.sh -s -R &>/dev/null")
def __call__(self, node):
'''Perform the 'RemoteLXC' test. '''
self.incr("calls")
ret = self.startall(None)
if not ret:
return self.failure("Setup failed, start all nodes failed.")
(rc, _) = self.rsh(node, "/usr/share/pacemaker/tests/cts/lxc_autogen.sh -v &>/dev/null")
if rc == 1:
self.log("Environment test for lxc support failed.")
return self.skipped()
self.start_lxc_simple(node)
self.cleanup_lxc_simple(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
if self.failed == 1:
return self.failure(self.fail_string)
return self.success()
def errorstoignore(self):
'''Return list of errors which should be ignored'''
return [
r"Updating failcount for ping",
r"schedulerd.*: Recover\s+(ping|lxc-ms|container)\s+\(.*\)",
# The orphaned lxc-ms resource causes an expected transition error
# that is a result of the scheduler not having knowledge that the
# promotable resource used to be a clone. As a result, it looks like that
# resource is running in multiple locations when it shouldn't... But in
# this instance we know why this error is occurring and that it is expected.
r"Calculated [Tt]ransition .*pe-error",
r"Resource lxc-ms .* is active on 2 nodes attempting recovery",
r"Unknown operation: fail",
r"VirtualDomain.*ERROR: Unable to determine emulator",
]
AllTestClasses.append(RemoteLXC)
class RemoteDriver(CTSTest):
def __init__(self, cm):
CTSTest.__init__(self,cm)
self.name = self.__class__.__name__
self.start = StartTest(cm)
self.startall = SimulStartLite(cm)
self.stop = StopTest(cm)
self.remote_rsc = "remote-rsc"
self.cib_cmd = """cibadmin -C -o %s -X '%s' """
self.reset()
def reset(self):
self.pcmk_started = 0
self.failed = False
self.fail_string = ""
self.remote_node_added = 0
self.remote_rsc_added = 0
self.remote_use_reconnect_interval = self.Env.RandomGen.choice([True,False])
def fail(self, msg):
""" Mark test as failed. """
self.failed = True
# Always log the failure.
self.logger.log(msg)
# Use first failure as test status, as it's likely to be most useful.
if not self.fail_string:
self.fail_string = msg
def get_othernode(self, node):
for othernode in self.Env["nodes"]:
if othernode == node:
# we don't want to try and use the cib that we just shutdown.
# find a cluster node that is not our soon to be remote-node.
continue
else:
return othernode
def del_rsc(self, node, rsc):
othernode = self.get_othernode(node)
(rc, _) = self.rsh(othernode, "crm_resource -D -r %s -t primitive" % (rsc))
if rc != 0:
self.fail("Removal of resource '%s' failed" % rsc)
def add_rsc(self, node, rsc_xml):
othernode = self.get_othernode(node)
(rc, _) = self.rsh(othernode, self.cib_cmd % ("resources", rsc_xml))
if rc != 0:
self.fail("resource creation failed")
def add_primitive_rsc(self, node):
rsc_xml = """
""" % { "node": self.remote_rsc }
self.add_rsc(node, rsc_xml)
if not self.failed:
self.remote_rsc_added = 1
def add_connection_rsc(self, node):
rsc_xml = """
""" % { "node": self.remote_node, "server": node }
if self.remote_use_reconnect_interval:
# Set reconnect interval on resource
rsc_xml = rsc_xml + """
""" % (self.remote_node)
rsc_xml = rsc_xml + """
""" % { "node": self.remote_node }
self.add_rsc(node, rsc_xml)
if not self.failed:
self.remote_node_added = 1
def disable_services(self, node):
self.corosync_enabled = self.Env.service_is_enabled(node, "corosync")
if self.corosync_enabled:
self.Env.disable_service(node, "corosync")
self.pacemaker_enabled = self.Env.service_is_enabled(node, "pacemaker")
if self.pacemaker_enabled:
self.Env.disable_service(node, "pacemaker")
def restore_services(self, node):
if self.corosync_enabled:
self.Env.enable_service(node, "corosync")
if self.pacemaker_enabled:
self.Env.enable_service(node, "pacemaker")
def stop_pcmk_remote(self, node):
# disable pcmk remote
for i in range(10):
(rc, _) = self.rsh(node, "service pacemaker_remote stop")
if rc != 0:
time.sleep(6)
else:
break
def start_pcmk_remote(self, node):
for i in range(10):
(rc, _) = self.rsh(node, "service pacemaker_remote start")
if rc != 0:
time.sleep(6)
else:
self.pcmk_started = 1
break
def freeze_pcmk_remote(self, node):
""" Simulate a Pacemaker Remote daemon failure. """
# We freeze the process.
self.rsh(node, "killall -STOP pacemaker-remoted")
def resume_pcmk_remote(self, node):
# We resume the process.
self.rsh(node, "killall -CONT pacemaker-remoted")
def start_metal(self, node):
# Cluster nodes are reused as remote nodes in remote tests. If cluster
# services were enabled at boot, in case the remote node got fenced, the
# cluster node would join instead of the expected remote one. Meanwhile
# pacemaker_remote would not be able to start. Depending on the chances,
# the situations might not be able to be orchestrated gracefully any more.
#
# Temporarily disable any enabled cluster serivces.
self.disable_services(node)
pcmk_started = 0
# make sure the resource doesn't already exist for some reason
self.rsh(node, "crm_resource -D -r %s -t primitive" % (self.remote_rsc))
self.rsh(node, "crm_resource -D -r %s -t primitive" % (self.remote_node))
if not self.stop(node):
self.fail("Failed to shutdown cluster node %s" % node)
return
self.start_pcmk_remote(node)
if self.pcmk_started == 0:
self.fail("Failed to start pacemaker_remote on node %s" % node)
return
# Convert node to baremetal now that it has shutdown the cluster stack
pats = [ ]
watch = self.create_watch(pats, 120)
watch.setwatch()
pats.append(self.templates["Pat:RscOpOK"] % ("start", self.remote_node))
pats.append(self.templates["Pat:DC_IDLE"])
self.add_connection_rsc(node)
self.set_timer("remoteMetalInit")
watch.lookforall()
self.log_timer("remoteMetalInit")
if watch.unmatched:
self.fail("Unmatched patterns: %s" % watch.unmatched)
def migrate_connection(self, node):
if self.failed:
return
pats = [ ]
pats.append(self.templates["Pat:RscOpOK"] % ("migrate_to", self.remote_node))
pats.append(self.templates["Pat:RscOpOK"] % ("migrate_from", self.remote_node))
pats.append(self.templates["Pat:DC_IDLE"])
watch = self.create_watch(pats, 120)
watch.setwatch()
(rc, _) = self.rsh(node, "crm_resource -M -r %s" % (self.remote_node), verbose=1)
if rc != 0:
self.fail("failed to move remote node connection resource")
return
self.set_timer("remoteMetalMigrate")
watch.lookforall()
self.log_timer("remoteMetalMigrate")
if watch.unmatched:
self.fail("Unmatched patterns: %s" % watch.unmatched)
return
def fail_rsc(self, node):
if self.failed:
return
watchpats = [ ]
watchpats.append(self.templates["Pat:RscRemoteOpOK"] % ("stop", self.remote_rsc, self.remote_node))
watchpats.append(self.templates["Pat:RscRemoteOpOK"] % ("start", self.remote_rsc, self.remote_node))
watchpats.append(self.templates["Pat:DC_IDLE"])
watch = self.create_watch(watchpats, 120)
watch.setwatch()
self.debug("causing dummy rsc to fail.")
self.rsh(node, "rm -f /var/run/resource-agents/Dummy*")
self.set_timer("remoteRscFail")
watch.lookforall()
self.log_timer("remoteRscFail")
if watch.unmatched:
self.fail("Unmatched patterns during rsc fail: %s" % watch.unmatched)
def fail_connection(self, node):
if self.failed:
return
watchpats = [ ]
watchpats.append(self.templates["Pat:Fencing_ok"] % self.remote_node)
watchpats.append(self.templates["Pat:NodeFenced"] % self.remote_node)
watch = self.create_watch(watchpats, 120)
watch.setwatch()
# freeze the pcmk remote daemon. this will result in fencing
self.debug("Force stopped active remote node")
self.freeze_pcmk_remote(node)
self.debug("Waiting for remote node to be fenced.")
self.set_timer("remoteMetalFence")
watch.lookforall()
self.log_timer("remoteMetalFence")
if watch.unmatched:
self.fail("Unmatched patterns: %s" % watch.unmatched)
return
self.debug("Waiting for the remote node to come back up")
self.CM.ns.WaitForNodeToComeUp(node, 120);
pats = [ ]
watch = self.create_watch(pats, 240)
watch.setwatch()
pats.append(self.templates["Pat:RscOpOK"] % ("start", self.remote_node))
if self.remote_rsc_added == 1:
pats.append(self.templates["Pat:RscRemoteOpOK"] % ("start", self.remote_rsc, self.remote_node))
# start the remote node again watch it integrate back into cluster.
self.start_pcmk_remote(node)
if self.pcmk_started == 0:
self.fail("Failed to start pacemaker_remote on node %s" % node)
return
self.debug("Waiting for remote node to rejoin cluster after being fenced.")
self.set_timer("remoteMetalRestart")
watch.lookforall()
self.log_timer("remoteMetalRestart")
if watch.unmatched:
self.fail("Unmatched patterns: %s" % watch.unmatched)
return
def add_dummy_rsc(self, node):
if self.failed:
return
# verify we can put a resource on the remote node
pats = [ ]
watch = self.create_watch(pats, 120)
watch.setwatch()
pats.append(self.templates["Pat:RscRemoteOpOK"] % ("start", self.remote_rsc, self.remote_node))
pats.append(self.templates["Pat:DC_IDLE"])
# Add a resource that must live on remote-node
self.add_primitive_rsc(node)
# force that rsc to prefer the remote node.
(rc, _) = self.CM.rsh(node, "crm_resource -M -r %s -N %s -f" % (self.remote_rsc, self.remote_node), verbose=1)
if rc != 0:
self.fail("Failed to place remote resource on remote node.")
return
self.set_timer("remoteMetalRsc")
watch.lookforall()
self.log_timer("remoteMetalRsc")
if watch.unmatched:
self.fail("Unmatched patterns: %s" % watch.unmatched)
def test_attributes(self, node):
if self.failed:
return
# This verifies permanent attributes can be set on a remote-node. It also
# verifies the remote-node can edit its own cib node section remotely.
(rc, line) = self.CM.rsh(node, "crm_attribute -l forever -n testattr -v testval -N %s" % (self.remote_node), verbose=1)
if rc != 0:
self.fail("Failed to set remote-node attribute. rc:%s output:%s" % (rc, line))
return
(rc, _) = self.CM.rsh(node, "crm_attribute -l forever -n testattr -q -N %s" % (self.remote_node), verbose=1)
if rc != 0:
self.fail("Failed to get remote-node attribute")
return
(rc, _) = self.CM.rsh(node, "crm_attribute -l forever -n testattr -D -N %s" % (self.remote_node), verbose=1)
if rc != 0:
self.fail("Failed to delete remote-node attribute")
return
def cleanup_metal(self, node):
self.restore_services(node)
if self.pcmk_started == 0:
return
pats = [ ]
watch = self.create_watch(pats, 120)
watch.setwatch()
if self.remote_rsc_added == 1:
pats.append(self.templates["Pat:RscOpOK"] % ("stop", self.remote_rsc))
if self.remote_node_added == 1:
pats.append(self.templates["Pat:RscOpOK"] % ("stop", self.remote_node))
self.set_timer("remoteMetalCleanup")
self.resume_pcmk_remote(node)
if self.remote_rsc_added == 1:
# Remove dummy resource added for remote node tests
self.debug("Cleaning up dummy rsc put on remote node")
self.rsh(self.get_othernode(node), "crm_resource -U -r %s" % self.remote_rsc)
self.del_rsc(node, self.remote_rsc)
if self.remote_node_added == 1:
# Remove remote node's connection resource
self.debug("Cleaning up remote node connection resource")
self.rsh(self.get_othernode(node), "crm_resource -U -r %s" % (self.remote_node))
self.del_rsc(node, self.remote_node)
watch.lookforall()
self.log_timer("remoteMetalCleanup")
if watch.unmatched:
self.fail("Unmatched patterns: %s" % watch.unmatched)
self.stop_pcmk_remote(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
if self.remote_node_added == 1:
# Remove remote node itself
self.debug("Cleaning up node entry for remote node")
self.rsh(self.get_othernode(node), "crm_node --force --remove %s" % self.remote_node)
def setup_env(self, node):
self.remote_node = "remote-%s" % (node)
# we are assuming if all nodes have a key, that it is
# the right key... If any node doesn't have a remote
# key, we regenerate it everywhere.
if self.rsh.exists_on_all("/etc/pacemaker/authkey", self.Env["nodes"]):
return
# create key locally
(handle, keyfile) = tempfile.mkstemp(".cts")
os.close(handle)
subprocess.check_call(["dd", "if=/dev/urandom", "of=%s" % keyfile, "bs=4096", "count=1"],
stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
# sync key throughout the cluster
for node in self.Env["nodes"]:
self.rsh(node, "mkdir -p --mode=0750 /etc/pacemaker")
- self.rsh.cp(keyfile, "root@%s:/etc/pacemaker/authkey" % node)
+ self.rsh.copy(keyfile, "root@%s:/etc/pacemaker/authkey" % node)
self.rsh(node, "chgrp haclient /etc/pacemaker /etc/pacemaker/authkey")
self.rsh(node, "chmod 0640 /etc/pacemaker/authkey")
os.unlink(keyfile)
def is_applicable(self):
if not self.is_applicable_common():
return False
for node in self.Env["nodes"]:
(rc, _) = self.rsh(node, "which pacemaker-remoted >/dev/null 2>&1")
if rc != 0:
return False
return True
def start_new_test(self, node):
self.incr("calls")
self.reset()
ret = self.startall(None)
if not ret:
return self.failure("setup failed: could not start all nodes")
self.setup_env(node)
self.start_metal(node)
self.add_dummy_rsc(node)
return True
def __call__(self, node):
return self.failure("This base class is not meant to be called directly.")
def errorstoignore(self):
'''Return list of errors which should be ignored'''
return [ r"""is running on remote.*which isn't allowed""",
r"""Connection terminated""",
r"""Could not send remote""",
]
# RemoteDriver is just a base class for other tests, so it is not added to AllTestClasses
class RemoteBasic(RemoteDriver):
def __call__(self, node):
'''Perform the 'RemoteBaremetal' test. '''
if not self.start_new_test(node):
return self.failure(self.fail_string)
self.test_attributes(node)
self.cleanup_metal(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
if self.failed:
return self.failure(self.fail_string)
return self.success()
AllTestClasses.append(RemoteBasic)
class RemoteStonithd(RemoteDriver):
def __call__(self, node):
'''Perform the 'RemoteStonithd' test. '''
if not self.start_new_test(node):
return self.failure(self.fail_string)
self.fail_connection(node)
self.cleanup_metal(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
if self.failed:
return self.failure(self.fail_string)
return self.success()
def is_applicable(self):
if not RemoteDriver.is_applicable(self):
return False
if "DoFencing" in list(self.Env.keys()):
return self.Env["DoFencing"]
return True
def errorstoignore(self):
ignore_pats = [
r"Lost connection to Pacemaker Remote node",
r"Software caused connection abort",
r"pacemaker-controld.*:\s+error.*: Operation remote-.*_monitor",
r"pacemaker-controld.*:\s+error.*: Result of monitor operation for remote-.*",
r"schedulerd.*:\s+Recover\s+remote-.*\s+\(.*\)",
r"error: Result of monitor operation for .* on remote-.*: Internal communication failure",
]
ignore_pats.extend(RemoteDriver.errorstoignore(self))
return ignore_pats
AllTestClasses.append(RemoteStonithd)
class RemoteMigrate(RemoteDriver):
def __call__(self, node):
'''Perform the 'RemoteMigrate' test. '''
if not self.start_new_test(node):
return self.failure(self.fail_string)
self.migrate_connection(node)
self.cleanup_metal(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
if self.failed:
return self.failure(self.fail_string)
return self.success()
def is_applicable(self):
if not RemoteDriver.is_applicable(self):
return 0
# This test requires at least three nodes: one to convert to a
# remote node, one to host the connection originally, and one
# to migrate the connection to.
if len(self.Env["nodes"]) < 3:
return 0
return 1
AllTestClasses.append(RemoteMigrate)
class RemoteRscFailure(RemoteDriver):
def __call__(self, node):
'''Perform the 'RemoteRscFailure' test. '''
if not self.start_new_test(node):
return self.failure(self.fail_string)
# This is an important step. We are migrating the connection
# before failing the resource. This verifies that the migration
# has properly maintained control over the remote-node.
self.migrate_connection(node)
self.fail_rsc(node)
self.cleanup_metal(node)
self.debug("Waiting for the cluster to recover")
self.CM.cluster_stable()
if self.failed:
return self.failure(self.fail_string)
return self.success()
def errorstoignore(self):
ignore_pats = [
r"schedulerd.*: Recover\s+remote-rsc\s+\(.*\)",
r"Dummy.*: No process state file found",
]
ignore_pats.extend(RemoteDriver.errorstoignore(self))
return ignore_pats
def is_applicable(self):
if not RemoteDriver.is_applicable(self):
return 0
# This test requires at least three nodes: one to convert to a
# remote node, one to host the connection originally, and one
# to migrate the connection to.
if len(self.Env["nodes"]) < 3:
return 0
return 1
AllTestClasses.append(RemoteRscFailure)
# vim:ts=4:sw=4:et:
diff --git a/cts/lab/ClusterManager.py b/cts/lab/ClusterManager.py
index d0b4793d22..8cf84cf9e9 100644
--- a/cts/lab/ClusterManager.py
+++ b/cts/lab/ClusterManager.py
@@ -1,1085 +1,1085 @@
""" ClusterManager class for Pacemaker's Cluster Test Suite (CTS)
"""
__copyright__ = """Copyright 2000-2023 the Pacemaker project contributors.
Certain portions by Huang Zhen are copyright 2004
International Business Machines. The version control history for this file
may have further details."""
__license__ = "GNU General Public License version 2 or later (GPLv2+) WITHOUT ANY WARRANTY"
import os
import re
import time
from collections import UserDict
from cts.CIB import ConfigFactory
from cts.CTS import NodeStatus, Process
from cts.CTStests import AuditResource
from cts.watcher import LogWatcher
from cts.environment import EnvFactory
from pacemaker.buildoptions import BuildOptions
from pacemaker._cts.logging import LogFactory
from pacemaker._cts.patterns import PatternSelector
from pacemaker._cts.remote import RemoteFactory
has_log_stats = {}
log_stats_bin = BuildOptions.DAEMON_DIR + "/cts_log_stats.sh"
log_stats = """
#!%s
# Tool for generating system load reports while CTS runs
trap "" 1
f=$1; shift
action=$1; shift
base=`basename $0`
if [ ! -e $f ]; then
echo "Time, Load 1, Load 5, Load 15, Test Marker" > $f
fi
function killpid() {
if [ -e $f.pid ]; then
kill -9 `cat $f.pid`
rm -f $f.pid
fi
}
function status() {
if [ -e $f.pid ]; then
kill -0 `cat $f.pid`
return $?
else
return 1
fi
}
function start() {
# Is it already running?
if
status
then
return
fi
echo Active as $$
echo $$ > $f.pid
while [ 1 = 1 ]; do
uptime | sed s/up.*:/,/ | tr '\\n' ',' >> $f
#top -b -c -n1 | grep -e usr/libexec/pacemaker | grep -v -e grep -e python | head -n 1 | sed s@/usr/libexec/pacemaker/@@ | awk '{print " 0, "$9", "$10", "$12}' | tr '\\n' ',' >> $f
echo 0 >> $f
sleep 5
done
}
case $action in
start)
start
;;
start-bg|bg)
# Use c --ssh -- ./stats.sh file start-bg
nohup $0 $f start >/dev/null 2>&1 > $f
echo " $*" >> $f
start
;;
*)
echo "Unknown action: $action."
;;
esac
""" % (BuildOptions.BASH_PATH)
class ClusterManager(UserDict):
'''The Cluster Manager class.
This is an subclass of the Python dictionary class.
(this is because it contains lots of {name,value} pairs,
not because it's behavior is that terribly similar to a
dictionary in other ways.)
This is an abstract class which class implements high-level
operations on the cluster and/or its cluster managers.
Actual cluster managers classes are subclassed from this type.
One of the things we do is track the state we think every node should
be in.
'''
def __InitialConditions(self):
#if os.geteuid() != 0:
# raise ValueError("Must Be Root!")
None
def _finalConditions(self):
for key in list(self.keys()):
if self[key] == None:
raise ValueError("Improper derivation: self[" + key + "] must be overridden by subclass.")
def __init__(self):
self.Env = EnvFactory().getInstance()
self.templates = PatternSelector(self.Env["Name"])
self.__InitialConditions()
self.logger = LogFactory()
self.TestLoggingLevel=0
self.data = {}
self.name = self.Env["Name"]
self.rsh = RemoteFactory().getInstance()
self.ShouldBeStatus={}
self.ns = NodeStatus(self.Env)
self.OurNode = os.uname()[1].lower()
self.__instance_errorstoignore = []
self.fastfail = 0
self.cib_installed = 0
self.config = None
self.cluster_monitor = 0
self.use_short_names = 1
if self.Env["DoBSC"]:
del self.templates["Pat:They_stopped"]
self._finalConditions()
self.check_transitions = 0
self.check_elections = 0
self.CIBsync = {}
self.CibFactory = ConfigFactory(self)
self.cib = self.CibFactory.createConfig(self.Env["Schema"])
def __getitem__(self, key):
if key == "Name":
return self.name
print("FIXME: Getting %s from %s" % (key, repr(self)))
if key in self.data:
return self.data[key]
return self.templates.get_patterns(key)
def __setitem__(self, key, value):
print("FIXME: Setting %s=%s on %s" % (key, value, repr(self)))
self.data[key] = value
def key_for_node(self, node):
return node
def instance_errorstoignore_clear(self):
'''Allows the test scenario to reset instance errors to ignore on each iteration.'''
self.__instance_errorstoignore = []
def instance_errorstoignore(self):
'''Return list of errors which are 'normal' for a specific test instance'''
return self.__instance_errorstoignore
def log(self, args):
self.logger.log(args)
def debug(self, args):
self.logger.debug(args)
def upcount(self):
'''How many nodes are up?'''
count = 0
for node in self.Env["nodes"]:
if self.ShouldBeStatus[node] == "up":
count = count + 1
return count
def install_support(self, command="install"):
for node in self.Env["nodes"]:
self.rsh(node, BuildOptions.DAEMON_DIR + "/cts-support " + command)
def prepare_fencing_watcher(self, name):
# If we don't have quorum now but get it as a result of starting this node,
# then a bunch of nodes might get fenced
upnode = None
if self.HasQuorum(None):
self.debug("Have quorum")
return None
if not self.templates["Pat:Fencing_start"]:
print("No start pattern")
return None
if not self.templates["Pat:Fencing_ok"]:
print("No ok pattern")
return None
stonith = None
stonithPats = []
for peer in self.Env["nodes"]:
if self.ShouldBeStatus[peer] != "up":
stonithPats.append(self.templates["Pat:Fencing_ok"] % peer)
stonithPats.append(self.templates["Pat:Fencing_start"] % peer)
stonith = LogWatcher(self.Env["LogFileName"], stonithPats, "StartupFencing", 0, hosts=self.Env["nodes"], kind=self.Env["LogWatcher"])
stonith.setwatch()
return stonith
def fencing_cleanup(self, node, stonith):
peer_list = []
peer_state = {}
self.debug("Looking for nodes that were fenced as a result of %s starting" % node)
# If we just started a node, we may now have quorum (and permission to fence)
if not stonith:
self.debug("Nothing to do")
return peer_list
q = self.HasQuorum(None)
if not q and len(self.Env["nodes"]) > 2:
# We didn't gain quorum - we shouldn't have shot anyone
self.debug("Quorum: %d Len: %d" % (q, len(self.Env["nodes"])))
return peer_list
for n in self.Env["nodes"]:
peer_state[n] = "unknown"
# Now see if any states need to be updated
self.debug("looking for: " + repr(stonith.regexes))
shot = stonith.look(0)
while shot:
line = repr(shot)
self.debug("Found: " + line)
del stonith.regexes[stonith.whichmatch]
# Extract node name
for n in self.Env["nodes"]:
if re.search(self.templates["Pat:Fencing_ok"] % n, shot):
peer = n
peer_state[peer] = "complete"
self.__instance_errorstoignore.append(self.templates["Pat:Fencing_ok"] % peer)
elif peer_state[n] != "complete" and re.search(self.templates["Pat:Fencing_start"] % n, shot):
# TODO: Correctly detect multiple fencing operations for the same host
peer = n
peer_state[peer] = "in-progress"
self.__instance_errorstoignore.append(self.templates["Pat:Fencing_start"] % peer)
if not peer:
self.logger.log("ERROR: Unknown stonith match: %s" % line)
elif not peer in peer_list:
self.debug("Found peer: " + peer)
peer_list.append(peer)
# Get the next one
shot = stonith.look(60)
for peer in peer_list:
self.debug(" Peer %s was fenced as a result of %s starting: %s" % (peer, node, peer_state[peer]))
if self.Env["at-boot"]:
self.ShouldBeStatus[peer] = "up"
else:
self.ShouldBeStatus[peer] = "down"
if peer_state[peer] == "in-progress":
# Wait for any in-progress operations to complete
shot = stonith.look(60)
while len(stonith.regexes) and shot:
line = repr(shot)
self.debug("Found: " + line)
del stonith.regexes[stonith.whichmatch]
shot = stonith.look(60)
# Now make sure the node is alive too
self.ns.WaitForNodeToComeUp(peer, self.Env["DeadTime"])
# Poll until it comes up
if self.Env["at-boot"]:
if not self.StataCM(peer):
time.sleep(self.Env["StartTime"])
if not self.StataCM(peer):
self.logger.log("ERROR: Peer %s failed to restart after being fenced" % peer)
return None
return peer_list
def StartaCM(self, node, verbose=False):
'''Start up the cluster manager on a given node'''
if verbose: self.logger.log("Starting %s on node %s" % (self.templates["Name"], node))
else: self.debug("Starting %s on node %s" % (self.templates["Name"], node))
ret = 1
if not node in self.ShouldBeStatus:
self.ShouldBeStatus[node] = "down"
if self.ShouldBeStatus[node] != "down":
return 1
patterns = []
# Technically we should always be able to notice ourselves starting
patterns.append(self.templates["Pat:Local_started"] % node)
if self.upcount() == 0:
patterns.append(self.templates["Pat:DC_started"] % node)
else:
patterns.append(self.templates["Pat:NonDC_started"] % node)
watch = LogWatcher(
self.Env["LogFileName"], patterns, "StartaCM", self.Env["StartTime"]+10, hosts=self.Env["nodes"], kind=self.Env["LogWatcher"])
self.install_config(node)
self.ShouldBeStatus[node] = "any"
if self.StataCM(node) and self.cluster_stable(self.Env["DeadTime"]):
self.logger.log ("%s was already started" % (node))
return 1
stonith = self.prepare_fencing_watcher(node)
watch.setwatch()
(rc, _) = self.rsh(node, self.templates["StartCmd"])
if rc != 0:
self.logger.log ("Warn: Start command failed on node %s" % (node))
self.fencing_cleanup(node, stonith)
return None
self.ShouldBeStatus[node] = "up"
watch_result = watch.lookforall()
if watch.unmatched:
for regex in watch.unmatched:
self.logger.log ("Warn: Startup pattern not found: %s" % (regex))
if watch_result and self.cluster_stable(self.Env["DeadTime"]):
#self.debug("Found match: "+ repr(watch_result))
self.fencing_cleanup(node, stonith)
return 1
elif self.StataCM(node) and self.cluster_stable(self.Env["DeadTime"]):
self.fencing_cleanup(node, stonith)
return 1
self.logger.log ("Warn: Start failed for node %s" % (node))
return None
def StartaCMnoBlock(self, node, verbose=False):
'''Start up the cluster manager on a given node with none-block mode'''
if verbose: self.logger.log("Starting %s on node %s" % (self["Name"], node))
else: self.debug("Starting %s on node %s" % (self["Name"], node))
self.install_config(node)
self.rsh(node, self.templates["StartCmd"], synchronous=False)
self.ShouldBeStatus[node] = "up"
return 1
def StopaCM(self, node, verbose=False, force=False):
'''Stop the cluster manager on a given node'''
if verbose: self.logger.log("Stopping %s on node %s" % (self["Name"], node))
else: self.debug("Stopping %s on node %s" % (self["Name"], node))
if self.ShouldBeStatus[node] != "up" and force == False:
return 1
(rc, _) = self.rsh(node, self.templates["StopCmd"])
if rc == 0:
# Make sure we can continue even if corosync leaks
# fdata-* is the old name
#self.rsh(node, "rm -rf /dev/shm/qb-* /dev/shm/fdata-*")
self.ShouldBeStatus[node] = "down"
self.cluster_stable(self.Env["DeadTime"])
return 1
else:
self.logger.log ("ERROR: Could not stop %s on node %s" % (self["Name"], node))
return None
def StopaCMnoBlock(self, node):
'''Stop the cluster manager on a given node with none-block mode'''
self.debug("Stopping %s on node %s" % (self["Name"], node))
self.rsh(node, self.templates["StopCmd"], synchronous=False)
self.ShouldBeStatus[node] = "down"
return 1
def RereadCM(self, node):
'''Force the cluster manager on a given node to reread its config
This may be a no-op on certain cluster managers.
'''
(rc, _) = self.rsh(node, self.templates["RereadCmd"])
if rc == 0:
return 1
else:
self.logger.log ("Could not force %s on node %s to reread its config"
% (self["Name"], node))
return None
def startall(self, nodelist=None, verbose=False, quick=False):
'''Start the cluster manager on every node in the cluster.
We can do it on a subset of the cluster if nodelist is not None.
'''
map = {}
if not nodelist:
nodelist = self.Env["nodes"]
for node in nodelist:
if self.ShouldBeStatus[node] == "down":
self.ns.WaitForAllNodesToComeUp(nodelist, 300)
if not quick:
# This is used for "basic sanity checks", so only start one node ...
if not self.StartaCM(node, verbose=verbose):
return 0
return 1
# Approximation of SimulStartList for --boot
watchpats = [ ]
watchpats.append(self.templates["Pat:DC_IDLE"])
for node in nodelist:
watchpats.append(self.templates["Pat:InfraUp"] % node)
watchpats.append(self.templates["Pat:PacemakerUp"] % node)
watchpats.append(self.templates["Pat:Local_started"] % node)
watchpats.append(self.templates["Pat:They_up"] % (nodelist[0], node))
# Start all the nodes - at about the same time...
watch = LogWatcher(self.Env["LogFileName"], watchpats, "fast-start", self.Env["DeadTime"]+10, hosts=self.Env["nodes"], kind=self.Env["LogWatcher"])
watch.setwatch()
if not self.StartaCM(nodelist[0], verbose=verbose):
return 0
for node in nodelist:
self.StartaCMnoBlock(node, verbose=verbose)
watch.lookforall()
if watch.unmatched:
for regex in watch.unmatched:
self.logger.log ("Warn: Startup pattern not found: %s" % (regex))
if not self.cluster_stable():
self.logger.log("Cluster did not stabilize")
return 0
return 1
def stopall(self, nodelist=None, verbose=False, force=False):
'''Stop the cluster managers on every node in the cluster.
We can do it on a subset of the cluster if nodelist is not None.
'''
ret = 1
map = {}
if not nodelist:
nodelist = self.Env["nodes"]
for node in self.Env["nodes"]:
if self.ShouldBeStatus[node] == "up" or force == True:
if not self.StopaCM(node, verbose=verbose, force=force):
ret = 0
return ret
def rereadall(self, nodelist=None):
'''Force the cluster managers on every node in the cluster
to reread their config files. We can do it on a subset of the
cluster if nodelist is not None.
'''
map = {}
if not nodelist:
nodelist = self.Env["nodes"]
for node in self.Env["nodes"]:
if self.ShouldBeStatus[node] == "up":
self.RereadCM(node)
def statall(self, nodelist=None):
'''Return the status of the cluster managers in the cluster.
We can do it on a subset of the cluster if nodelist is not None.
'''
result = {}
if not nodelist:
nodelist = self.Env["nodes"]
for node in nodelist:
if self.StataCM(node):
result[node] = "up"
else:
result[node] = "down"
return result
def isolate_node(self, target, nodes=None):
'''isolate the communication between the nodes'''
if not nodes:
nodes = self.Env["nodes"]
for node in nodes:
if node != target:
rc = self.rsh(target, self.templates["BreakCommCmd"] % self.key_for_node(node))
if rc != 0:
self.logger.log("Could not break the communication between %s and %s: %d" % (target, node, rc))
return None
else:
self.debug("Communication cut between %s and %s" % (target, node))
return 1
def unisolate_node(self, target, nodes=None):
'''fix the communication between the nodes'''
if not nodes:
nodes = self.Env["nodes"]
for node in nodes:
if node != target:
restored = 0
# Limit the amount of time we have asynchronous connectivity for
# Restore both sides as simultaneously as possible
self.rsh(target, self.templates["FixCommCmd"] % self.key_for_node(node), synchronous=False)
self.rsh(node, self.templates["FixCommCmd"] % self.key_for_node(target), synchronous=False)
self.debug("Communication restored between %s and %s" % (target, node))
def reducecomm_node(self,node):
'''reduce the communication between the nodes'''
(rc, _) = self.rsh(node, self.templates["ReduceCommCmd"]%(self.Env["XmitLoss"],self.Env["RecvLoss"]))
if rc == 0:
return 1
else:
self.logger.log("Could not reduce the communication between the nodes from node: %s" % node)
return None
def restorecomm_node(self,node):
'''restore the saved communication between the nodes'''
rc = 0
if float(self.Env["XmitLoss"]) != 0 or float(self.Env["RecvLoss"]) != 0 :
(rc, _) = self.rsh(node, self.templates["RestoreCommCmd"])
if rc == 0:
return 1
else:
self.logger.log("Could not restore the communication between the nodes from node: %s" % node)
return None
def oprofileStart(self, node=None):
if not node:
for n in self.Env["oprofile"]:
self.oprofileStart(n)
elif node in self.Env["oprofile"]:
self.debug("Enabling oprofile on %s" % node)
self.rsh(node, "opcontrol --init")
self.rsh(node, "opcontrol --setup --no-vmlinux --separate=lib --callgraph=20 --image=all")
self.rsh(node, "opcontrol --start")
self.rsh(node, "opcontrol --reset")
def oprofileSave(self, test, node=None):
if not node:
for n in self.Env["oprofile"]:
self.oprofileSave(test, n)
elif node in self.Env["oprofile"]:
self.rsh(node, "opcontrol --dump")
self.rsh(node, "opcontrol --save=cts.%d" % test)
# Read back with: opreport -l session:cts.0 image:/c*
if None:
self.rsh(node, "opcontrol --reset")
else:
self.oprofileStop(node)
self.oprofileStart(node)
def oprofileStop(self, node=None):
if not node:
for n in self.Env["oprofile"]:
self.oprofileStop(n)
elif node in self.Env["oprofile"]:
self.debug("Stopping oprofile on %s" % node)
self.rsh(node, "opcontrol --reset")
self.rsh(node, "opcontrol --shutdown 2>&1 > /dev/null")
def StatsExtract(self):
if not self.Env["stats"]:
return
for host in self.Env["nodes"]:
log_stats_file = "%s/cts-stats.csv" % BuildOptions.DAEMON_DIR
if host in has_log_stats:
self.rsh(host, '''bash %s %s stop''' % (log_stats_bin, log_stats_file))
(_, lines) = self.rsh(host, '''cat %s''' % log_stats_file, verbose=1)
self.rsh(host, '''bash %s %s delete''' % (log_stats_bin, log_stats_file))
fname = "cts-stats-%d-nodes-%s.csv" % (len(self.Env["nodes"]), host)
print("Extracted stats: %s" % fname)
fd = open(fname, "a")
fd.writelines(lines)
fd.close()
def StatsMark(self, testnum):
'''Mark the test number in the stats log'''
global has_log_stats
if not self.Env["stats"]:
return
for host in self.Env["nodes"]:
log_stats_file = "%s/cts-stats.csv" % BuildOptions.DAEMON_DIR
if not host in has_log_stats:
global log_stats
global log_stats_bin
script=log_stats
#script = re.sub("\\\\", "\\\\", script)
script = re.sub('\"', '\\\"', script)
script = re.sub("'", "\'", script)
script = re.sub("`", "\`", script)
script = re.sub("\$", "\\\$", script)
self.debug("Installing %s on %s" % (log_stats_bin, host))
self.rsh(host, '''echo "%s" > %s''' % (script, log_stats_bin), verbose=0)
self.rsh(host, '''bash %s %s delete''' % (log_stats_bin, log_stats_file))
has_log_stats[host] = 1
# Now mark it
self.rsh(host, '''bash %s %s mark %s''' % (log_stats_bin, log_stats_file, testnum), synchronous=False)
def errorstoignore(self):
# At some point implement a more elegant solution that
# also produces a report at the end
""" Return a list of known error messages that should be ignored """
return self.templates.get_patterns("BadNewsIgnore")
def install_config(self, node):
if not self.ns.WaitForNodeToComeUp(node):
self.log("Node %s is not up." % node)
return None
if not node in self.CIBsync and self.Env["ClobberCIB"] == 1:
self.CIBsync[node] = 1
self.rsh(node, "rm -f " + BuildOptions.CIB_DIR + "/cib*")
# Only install the CIB on the first node, all the other ones will pick it up from there
if self.cib_installed == 1:
return None
self.cib_installed = 1
if self.Env["CIBfilename"] == None:
self.log("Installing Generated CIB on node %s" % (node))
self.cib.install(node)
else:
self.log("Installing CIB (%s) on node %s" % (self.Env["CIBfilename"], node))
- if 0 != self.rsh.cp(self.Env["CIBfilename"], "root@" + (self.templates["CIBfile"] % node)):
+ if self.rsh.copy(self.Env["CIBfilename"], "root@" + (self.templates["CIBfile"] % node)) != 0:
raise ValueError("Can not scp file to %s %d"%(node))
self.rsh(node, "chown " + BuildOptions.DAEMON_USER + " " + BuildOptions.CIB_DIR + "/cib.xml")
def prepare(self):
'''Finish the Initialization process. Prepare to test...'''
self.partitions_expected = 1
for node in self.Env["nodes"]:
self.ShouldBeStatus[node] = ""
if self.Env["experimental-tests"]:
self.unisolate_node(node)
self.StataCM(node)
def test_node_CM(self, node):
'''Report the status of the cluster manager on a given node'''
watchpats = [ ]
watchpats.append("Current ping state: (S_IDLE|S_NOT_DC)")
watchpats.append(self.templates["Pat:NonDC_started"] % node)
watchpats.append(self.templates["Pat:DC_started"] % node)
idle_watch = LogWatcher(self.Env["LogFileName"], watchpats, "ClusterIdle", hosts=[node], kind=self.Env["LogWatcher"])
idle_watch.setwatch()
(_, out) = self.rsh(node, self.templates["StatusCmd"]%node, verbose=1)
if not out:
out = ""
else:
out = out[0].strip()
self.debug("Node %s status: '%s'" %(node, out))
if out.find('ok') < 0:
if self.ShouldBeStatus[node] == "up":
self.log(
"Node status for %s is %s but we think it should be %s"
% (node, "down", self.ShouldBeStatus[node]))
self.ShouldBeStatus[node] = "down"
return 0
if self.ShouldBeStatus[node] == "down":
self.log(
"Node status for %s is %s but we think it should be %s: %s"
% (node, "up", self.ShouldBeStatus[node], out))
self.ShouldBeStatus[node] = "up"
# check the output first - because syslog-ng loses messages
if out.find('S_NOT_DC') != -1:
# Up and stable
return 2
if out.find('S_IDLE') != -1:
# Up and stable
return 2
# fall back to syslog-ng and wait
if not idle_watch.look():
# just up
self.debug("Warn: Node %s is unstable: %s" % (node, out))
return 1
# Up and stable
return 2
# Is the node up or is the node down
def StataCM(self, node):
'''Report the status of the cluster manager on a given node'''
if self.test_node_CM(node) > 0:
return 1
return None
# Being up and being stable is not the same question...
def node_stable(self, node):
'''Report the status of the cluster manager on a given node'''
if self.test_node_CM(node) == 2:
return 1
self.log("Warn: Node %s not stable" % (node))
return None
def partition_stable(self, nodes, timeout=None):
watchpats = [ ]
watchpats.append("Current ping state: S_IDLE")
watchpats.append(self.templates["Pat:DC_IDLE"])
self.debug("Waiting for cluster stability...")
if timeout == None:
timeout = self.Env["DeadTime"]
if len(nodes) < 3:
self.debug("Cluster is inactive")
return 1
idle_watch = LogWatcher(self.Env["LogFileName"], watchpats, "ClusterStable", timeout, hosts=nodes.split(), kind=self.Env["LogWatcher"])
idle_watch.setwatch()
for node in nodes.split():
# have each node dump its current state
self.rsh(node, self.templates["StatusCmd"] % node, verbose=1)
ret = idle_watch.look()
while ret:
self.debug(ret)
for node in nodes.split():
if re.search(node, ret):
return 1
ret = idle_watch.look()
self.debug("Warn: Partition %s not IDLE after %ds" % (repr(nodes), timeout))
return None
def cluster_stable(self, timeout=None, double_check=False):
partitions = self.find_partitions()
for partition in partitions:
if not self.partition_stable(partition, timeout):
return None
if double_check:
# Make sure we are really stable and that all resources,
# including those that depend on transient node attributes,
# are started if they were going to be
time.sleep(5)
for partition in partitions:
if not self.partition_stable(partition, timeout):
return None
return 1
def is_node_dc(self, node, status_line=None):
rc = 0
if not status_line:
(_, out) = self.rsh(node, self.templates["StatusCmd"]%node, verbose=1)
if out:
status_line = out[0].strip()
if not status_line:
rc = 0
elif status_line.find('S_IDLE') != -1:
rc = 1
elif status_line.find('S_INTEGRATION') != -1:
rc = 1
elif status_line.find('S_FINALIZE_JOIN') != -1:
rc = 1
elif status_line.find('S_POLICY_ENGINE') != -1:
rc = 1
elif status_line.find('S_TRANSITION_ENGINE') != -1:
rc = 1
return rc
def active_resources(self, node):
(_, output) = self.rsh(node, "crm_resource -c", verbose=1)
resources = []
for line in output:
if re.search("^Resource", line):
tmp = AuditResource(self, line)
if tmp.type == "primitive" and tmp.host == node:
resources.append(tmp.id)
return resources
def ResourceLocation(self, rid):
ResourceNodes = []
for node in self.Env["nodes"]:
if self.ShouldBeStatus[node] == "up":
cmd = self.templates["RscRunning"] % (rid)
(rc, lines) = self.rsh(node, cmd)
if rc == 127:
self.log("Command '%s' failed. Binary or pacemaker-cts package not installed?" % cmd)
for line in lines:
self.log("Output: "+line)
elif rc == 0:
ResourceNodes.append(node)
return ResourceNodes
def find_partitions(self):
ccm_partitions = []
for node in self.Env["nodes"]:
if self.ShouldBeStatus[node] == "up":
(_, out) = self.rsh(node, self.templates["PartitionCmd"], verbose=1)
if not out:
self.log("no partition details for %s" % node)
continue
partition = out[0].strip()
if len(partition) > 2:
nodes = partition.split()
nodes.sort()
partition = ' '.join(nodes)
found = 0
for a_partition in ccm_partitions:
if partition == a_partition:
found = 1
if found == 0:
self.debug("Adding partition from %s: %s" % (node, partition))
ccm_partitions.append(partition)
else:
self.debug("Partition '%s' from %s is consistent with existing entries" % (partition, node))
else:
self.log("bad partition details for %s" % node)
else:
self.debug("Node %s is down... skipping" % node)
self.debug("Found partitions: %s" % repr(ccm_partitions) )
return ccm_partitions
def HasQuorum(self, node_list):
# If we are auditing a partition, then one side will
# have quorum and the other not.
# So the caller needs to tell us which we are checking
# If no value for node_list is specified... assume all nodes
if not node_list:
node_list = self.Env["nodes"]
for node in node_list:
if self.ShouldBeStatus[node] == "up":
(_, quorum) = self.rsh(node, self.templates["QuorumCmd"], verbose=1)
quorum = quorum[0].strip()
if quorum.find("1") != -1:
return 1
elif quorum.find("0") != -1:
return 0
else:
self.debug("WARN: Unexpected quorum test result from " + node + ":" + quorum)
return 0
def Components(self):
complist = []
common_ignore = [
"Pending action:",
"(ERROR|error): crm_log_message_adv:",
"(ERROR|error): MSG: No message to dump",
"pending LRM operations at shutdown",
"Lost connection to the CIB manager",
"Connection to the CIB terminated...",
"Sending message to the CIB manager FAILED",
"Action A_RECOVER .* not supported",
"(ERROR|error): stonithd_op_result_ready: not signed on",
"pingd.*(ERROR|error): send_update: Could not send update",
"send_ipc_message: IPC Channel to .* is not connected",
"unconfirmed_actions: Waiting on .* unconfirmed actions",
"cib_native_msgready: Message pending on command channel",
r": Performing A_EXIT_1 - forcefully exiting ",
r"Resource .* was active at shutdown. You may ignore this error if it is unmanaged.",
]
stonith_ignore = [
r"Updating failcount for child_DoFencing",
r"error.*: Fencer connection failed \(will retry\)",
"pacemaker-execd.*(ERROR|error): stonithd_receive_ops_result failed.",
]
stonith_ignore.extend(common_ignore)
ccm = Process(self, "ccm", triggersreboot=self.fastfail, pats = [
"State transition .* S_RECOVERY",
"pacemaker-controld.*Action A_RECOVER .* not supported",
r"pacemaker-controld.*: Input I_TERMINATE .*from do_recover",
r"pacemaker-controld.*: Could not recover from internal error",
"pacemaker-controld.*I_ERROR.*crmd_cib_connection_destroy",
# these status numbers are likely wrong now
r"pacemaker-controld.*exited with status 2",
r"attrd.*exited with status 1",
r"cib.*exited with status 2",
# Not if it was fenced
# "A new node joined the cluster",
# "WARN: determine_online_status: Node .* is unclean",
# "Scheduling node .* for fencing",
# "Executing .* fencing operation",
# "tengine_stonith_callback: .*result=0",
# "Processing I_NODE_JOIN:.* cause=C_HA_MESSAGE",
# "State transition S_.* -> S_INTEGRATION.*input=I_NODE_JOIN",
"State transition S_STARTING -> S_PENDING",
], badnews_ignore = common_ignore)
based = Process(self, "pacemaker-based", triggersreboot=self.fastfail, pats = [
"State transition .* S_RECOVERY",
"Lost connection to the CIB manager",
"Connection to the CIB manager terminated",
r"pacemaker-controld.*: Input I_TERMINATE .*from do_recover",
"pacemaker-controld.*I_ERROR.*crmd_cib_connection_destroy",
r"pacemaker-controld.*: Could not recover from internal error",
# these status numbers are likely wrong now
r"pacemaker-controld.*exited with status 2",
r"attrd.*exited with status 1",
], badnews_ignore = common_ignore)
execd = Process(self, "pacemaker-execd", triggersreboot=self.fastfail, pats = [
"State transition .* S_RECOVERY",
"LRM Connection failed",
"pacemaker-controld.*I_ERROR.*lrm_connection_destroy",
"State transition S_STARTING -> S_PENDING",
r"pacemaker-controld.*: Input I_TERMINATE .*from do_recover",
r"pacemaker-controld.*: Could not recover from internal error",
# this status number is likely wrong now
r"pacemaker-controld.*exited with status 2",
], badnews_ignore = common_ignore)
controld = Process(self, "pacemaker-controld", triggersreboot=self.fastfail,
pats = [
# "WARN: determine_online_status: Node .* is unclean",
# "Scheduling node .* for fencing",
# "Executing .* fencing operation",
# "tengine_stonith_callback: .*result=0",
"State transition .* S_IDLE",
"State transition S_STARTING -> S_PENDING",
], badnews_ignore = common_ignore)
schedulerd = Process(self, "pacemaker-schedulerd", triggersreboot=self.fastfail, pats = [
"State transition .* S_RECOVERY",
r"pacemaker-controld.*: Input I_TERMINATE .*from do_recover",
r"pacemaker-controld.*: Could not recover from internal error",
r"pacemaker-controld.*CRIT.*: Connection to the scheduler failed",
"pacemaker-controld.*I_ERROR.*save_cib_contents",
# this status number is likely wrong now
r"pacemaker-controld.*exited with status 2",
], badnews_ignore = common_ignore, dc_only=1)
if self.Env["DoFencing"] == 1 :
complist.append(Process(self, "stoniths", triggersreboot=self.fastfail, dc_pats = [
r"pacemaker-controld.*CRIT.*: Fencing daemon connection failed",
"Attempting connection to fencing daemon",
], badnews_ignore = stonith_ignore))
if self.fastfail == 0:
ccm.pats.extend([
# these status numbers are likely wrong now
r"attrd.*exited with status 1",
r"pacemaker-(based|controld).*exited with status 2",
])
based.pats.extend([
# these status numbers are likely wrong now
r"attrd.*exited with status 1",
r"pacemaker-controld.*exited with status 2",
])
execd.pats.extend([
# these status numbers are likely wrong now
r"pacemaker-controld.*exited with status 2",
])
complist.append(ccm)
complist.append(based)
complist.append(execd)
complist.append(controld)
complist.append(schedulerd)
return complist
def StandbyStatus(self, node):
(_, out) = self.rsh(node, self.templates["StandbyQueryCmd"] % node, verbose=1)
if not out:
return "off"
out = out[0].strip()
self.debug("Standby result: "+out)
return out
# status == "on" : Enter Standby mode
# status == "off": Enter Active mode
def SetStandbyMode(self, node, status):
current_status = self.StandbyStatus(node)
cmd = self.templates["StandbyCmd"] % (node, status)
self.rsh(node, cmd)
return True
def AddDummyRsc(self, node, rid):
rsc_xml = """ '
'""" % (rid, rid)
constraint_xml = """ '
'
""" % (rid, node, node, rid)
self.rsh(node, self.templates['CibAddXml'] % (rsc_xml))
self.rsh(node, self.templates['CibAddXml'] % (constraint_xml))
def RemoveDummyRsc(self, node, rid):
constraint = "\"//rsc_location[@rsc='%s']\"" % (rid)
rsc = "\"//primitive[@id='%s']\"" % (rid)
self.rsh(node, self.templates['CibDelXpath'] % constraint)
self.rsh(node, self.templates['CibDelXpath'] % rsc)
diff --git a/python/pacemaker/_cts/remote.py b/python/pacemaker/_cts/remote.py
index 6a2ef03a5e..2c45797579 100644
--- a/python/pacemaker/_cts/remote.py
+++ b/python/pacemaker/_cts/remote.py
@@ -1,226 +1,226 @@
""" Remote command runner for Pacemaker's Cluster Test Suite (CTS)
"""
__all__ = ["RemoteExec", "RemoteFactory"]
__copyright__ = "Copyright 2014-2023 the Pacemaker project contributors"
__license__ = "GNU General Public License version 2 or later (GPLv2+) WITHOUT ANY WARRANTY"
import re
import os
from subprocess import Popen,PIPE
from threading import Thread
from pacemaker._cts.logging import LogFactory
def convert2string(lines):
if isinstance(lines, bytes):
return lines.decode("utf-8")
if isinstance(lines, list):
lst = []
for line in lines:
if isinstance(line, bytes):
line = line.decode("utf-8")
lst.append(line)
return lst
return lines
class AsyncCmd(Thread):
def __init__(self, node, command, proc=None, delegate=None):
self._command = command
self._delegate = delegate
self._logger = LogFactory()
self._node = node
self._proc = proc
Thread.__init__(self)
def run(self):
out = None
err = None
if not self._proc:
self._proc = Popen(self._command, stdout=PIPE, stderr=PIPE, close_fds=True, shell=True)
self._logger.debug("cmd: async: target=%s, pid=%d: %s" % (self._node, self._proc.pid, self._command))
self._proc.wait()
if self._delegate:
self._logger.debug("cmd: pid %d returned %d to %s" % (self._proc.pid, self._proc.returncode, repr(self._delegate)))
else:
self._logger.debug("cmd: pid %d returned %d" % (self._proc.pid, self._proc.returncode))
if self._proc.stderr:
err = self._proc.stderr.readlines()
self._proc.stderr.close()
for line in err:
self._logger.debug("cmd: stderr[%d]: %s" % (self._proc.pid, line))
err = convert2string(err)
if self._proc.stdout:
out = self._proc.stdout.readlines()
self._proc.stdout.close()
out = convert2string(out)
if self._delegate:
self._delegate.async_complete(self._proc.pid, self._proc.returncode, out, err)
class RemoteExec:
'''This is an abstract remote execution class. It runs a command on another
machine - somehow. The somehow is up to us. This particular
class uses ssh.
Most of the work is done by fork/exec of ssh or scp.
'''
def __init__(self, command, cp_command, silent=False):
self._command = command
self._cp_command = cp_command
self._logger = LogFactory()
self._silent = silent
self._our_node = os.uname()[1].lower()
def _fixcmd(self, cmd):
return re.sub("\'", "'\\''", cmd)
def _cmd(self, args):
'''Compute the string that will run the given command on the
given remote system'''
sysname = args[0]
command = args[1]
if sysname is None or sysname.lower() == self._our_node or sysname == "localhost":
ret = command
else:
ret = "%s %s '%s'" % (self._command, sysname, self._fixcmd(command))
return ret
def _log(self, args):
if not self._silent:
self._logger.log(args)
def _debug(self, args):
if not self._silent:
self._logger.debug(args)
def call_async(self, node, command, delegate=None):
aproc = AsyncCmd(node, self._cmd([node, command]), delegate=delegate)
aproc.start()
return aproc
def __call__(self, node, command, synchronous=True, verbose=2):
""" Run the given command on the given remote system. If you call this class
like a function, this is what gets called. It's approximately the same
as a system() call on the remote machine.
Arguments:
node -- The remote machine to run on
command -- The command to run, as a string
synchronous -- Should we wait for the command to complete?
verbose -- If 0, do not lo:g anything. If 1, log the command and its
return code but not its output. If 2, additionally log
command output.
Returns:
A tuple of (return code, command output)
"""
rc = 0
result = None
proc = Popen(self._cmd([node, command]),
stdout = PIPE, stderr = PIPE, close_fds = True, shell = True)
if not synchronous and proc.pid > 0 and not self._silent:
aproc = AsyncCmd(node, command, proc=proc)
aproc.start()
return (rc, result)
if proc.stdout:
result = proc.stdout.readlines()
proc.stdout.close()
else:
self._log("No stdout stream")
rc = proc.wait()
if verbose > 0:
self._debug("cmd: target=%s, rc=%d: %s" % (node, rc, command))
result = convert2string(result)
if proc.stderr:
errors = proc.stderr.readlines()
proc.stderr.close()
for err in errors:
self._debug("cmd: stderr: %s" % err)
if verbose == 2:
for line in result:
self._debug("cmd: stdout: %s" % line)
return (rc, result)
- def cp(self, source, target, silent=False):
+ def copy(self, source, target, silent=False):
'''Perform a remote copy'''
cmd = "%s '%s' '%s'" % (self._cp_command, source, target)
rc = os.system(cmd)
if not silent:
self._debug("cmd: rc=%d: %s" % (rc, cmd))
return rc
def exists_on_all(self, filename, hosts):
""" Return True if specified file exists on all specified hosts. """
for host in hosts:
rc = self(host, "test -r %s" % filename)
if rc != 0:
return False
return True
class RemoteFactory:
# Class variables
# -n: no stdin, -x: no X11,
# -o ServerAliveInterval=5: disconnect after 3*5s if the server
# stops responding
command = ("ssh -l root -n -x -o ServerAliveInterval=5 "
"-o ConnectTimeout=10 -o TCPKeepAlive=yes "
"-o ServerAliveCountMax=3 ")
# -B: batch mode, -q: no stats (quiet)
cp_command = "scp -B -q"
instance = None
def getInstance(self):
if not RemoteFactory.instance:
RemoteFactory.instance = RemoteExec(RemoteFactory.command,
RemoteFactory.cp_command,
False)
return RemoteFactory.instance
def new(self, silent=False):
return RemoteExec(RemoteFactory.command, RemoteFactory.cp_command,
silent)
def enable_qarsh(self):
# http://nstraz.wordpress.com/2008/12/03/introducing-qarsh/
print("Using QARSH for connections to cluster nodes")
RemoteFactory.command = "qarsh -t 300 -l root"
RemoteFactory.cp_command = "qacp -q"