diff --git a/doc/Pacemaker_Explained/en-US/Ch-Options.txt b/doc/Pacemaker_Explained/en-US/Ch-Options.txt index fa34d62be5..026d329b80 100644 --- a/doc/Pacemaker_Explained/en-US/Ch-Options.txt +++ b/doc/Pacemaker_Explained/en-US/Ch-Options.txt @@ -1,398 +1,398 @@ = Cluster-Wide Configuration = == CIB Properties == Certain settings are defined by CIB properties (that is, attributes of the +cib+ tag) rather than with the rest of the cluster configuration in the +configuration+ section. The reason is simply a matter of parsing. These options are used by the configuration database which is, by design, mostly ignorant of the content it holds. So the decision was made to place them in an easy-to-find location. .CIB Properties [width="95%",cols="2m,5<",options="header",align="center"] |========================================================= |Field |Description | admin_epoch | indexterm:[Configuration Version,Cluster] indexterm:[Cluster,Option,Configuration Version] indexterm:[admin_epoch,Cluster Option] indexterm:[Cluster,Option,admin_epoch] When a node joins the cluster, the cluster performs a check to see which node has the best configuration. It asks the node with the highest (+admin_epoch+, +epoch+, +num_updates+) tuple to replace the configuration on all the nodes -- which makes setting them, and setting them correctly, very important. +admin_epoch+ is never modified by the cluster; you can use this to make the configurations on any inactive nodes obsolete. _Never set this value to zero_. In such cases, the cluster cannot tell the difference between your configuration and the "empty" one used when nothing is found on disk. | epoch | indexterm:[epoch,Cluster Option] indexterm:[Cluster,Option,epoch] The cluster increments this every time the configuration is updated (usually by the administrator). | num_updates | indexterm:[num_updates,Cluster Option] indexterm:[Cluster,Option,num_updates] The cluster increments this every time the configuration or status is updated (usually by the cluster) and resets it to 0 when epoch changes. | validate-with | indexterm:[validate-with,Cluster Option] indexterm:[Cluster,Option,validate-with] Determines the type of XML validation that will be done on the configuration. If set to +none+, the cluster will not verify that updates conform to the DTD (nor reject ones that don't). This option can be useful when operating a mixed-version cluster during an upgrade. |cib-last-written | indexterm:[cib-last-written,Cluster Property] indexterm:[Cluster,Property,cib-last-written] Indicates when the configuration was last written to disk. Maintained by the cluster; for informational purposes only. |have-quorum | indexterm:[have-quorum,Cluster Property] indexterm:[Cluster,Property,have-quorum] Indicates if the cluster has quorum. If false, this may mean that the cluster cannot start resources or fence other nodes (see +no-quorum-policy+ below). Maintained by the cluster. |dc-uuid | indexterm:[dc-uuid,Cluster Property] indexterm:[Cluster,Property,dc-uuid] Indicates which cluster node is the current leader. Used by the cluster when placing resources and determining the order of some events. Maintained by the cluster. |========================================================= === Working with CIB Properties === Although these fields can be written to by the user, in most cases the cluster will overwrite any values specified by the user with the "correct" ones. To change the ones that can be specified by the user, for example +admin_epoch+, one should use: ---- # cibadmin --modify --crm_xml '' ---- A complete set of CIB properties will look something like this: .Attributes set for a cib object ====== [source,XML] ------- ------- ====== == Cluster Options == Cluster options, as you might expect, control how the cluster behaves when confronted with certain situations. They are grouped into sets within the +crm_config+ section, and, in advanced configurations, there may be more than one set. (This will be described later in the section on <> where we will show how to have the cluster use different sets of options during working hours than during weekends.) For now, we will describe the simple case where each option is present at most once. You can obtain an up-to-date list of cluster options, including their default values, by running the `man pengine` and `man crmd` commands. .Cluster Options [width="95%",cols="5m,2,11>). | enable-startup-probes | TRUE | indexterm:[enable-startup-probes,Cluster Option] indexterm:[Cluster,Option,enable-startup-probes] Should the cluster check for active resources during startup? | maintenance-mode | FALSE | indexterm:[maintenance-mode,Cluster Option] indexterm:[Cluster,Option,maintenance-mode] Should the cluster refrain from monitoring, starting and stopping resources? | stonith-enabled | TRUE | indexterm:[stonith-enabled,Cluster Option] indexterm:[Cluster,Option,stonith-enabled] Should failed nodes and nodes with resources that can't be stopped be shot? If you value your data, set up a STONITH device and enable this. If true, or unset, the cluster will refuse to start resources unless one or more STONITH resources have been configured. | stonith-action | reboot | indexterm:[stonith-action,Cluster Option] indexterm:[Cluster,Option,stonith-action] Action to send to STONITH device. Allowed values are +reboot+ and +off+. The value +poweroff+ is also allowed, but is only used for legacy devices. | stonith-timeout | 60s | indexterm:[stonith-timeout,Cluster Option] indexterm:[Cluster,Option,stonith-timeout] How long to wait for STONITH actions to complete | cluster-delay | 60s | indexterm:[cluster-delay,Cluster Option] indexterm:[Cluster,Option,cluster-delay] Estimated maximum round-trip delay over the network (excluding action execution). If the TE requires an action to be executed on another node, it will consider the action failed if it does not get a response from the other node in this time (after considering the action's own timeout). The "correct" value will depend on the speed and load of your network and cluster nodes. | dc-deadtime | 20s | indexterm:[dc-deadtime,Cluster Option] indexterm:[Cluster,Option,dc-deadtime] How long to wait for a response from other nodes during startup. The "correct" value will depend on the speed/load of your network and the type of switches used. | cluster-recheck-interval | 15min | indexterm:[cluster-recheck-interval,Cluster Option] indexterm:[Cluster,Option,cluster-recheck-interval] Polling interval for time-based changes to options, resource parameters and constraints. The Cluster is primarily event-driven, but your configuration can have elements that take effect based on the time of day. To ensure these changes take effect, we can optionally poll the cluster's status for changes. A value of 0 disables polling. Positive values are an interval (in seconds unless other SI units are specified, e.g. 5min). | pe-error-series-max | -1 | indexterm:[pe-error-series-max,Cluster Option] indexterm:[Cluster,Option,pe-error-series-max] The number of PE inputs resulting in ERRORs to save. Used when reporting problems. A value of -1 means unlimited (report all). | pe-warn-series-max | -1 | indexterm:[pe-warn-series-max,Cluster Option] indexterm:[Cluster,Option,pe-warn-series-max] The number of PE inputs resulting in WARNINGs to save. Used when reporting problems. A value of -1 means unlimited (report all). | pe-input-series-max | -1 | indexterm:[pe-input-series-max,Cluster Option] indexterm:[Cluster,Option,pe-input-series-max] The number of "normal" PE inputs to save. Used when reporting problems. A value of -1 means unlimited (report all). | remove-after-stop | FALSE | indexterm:[remove-after-stop,Cluster Option] indexterm:[Cluster,Option,remove-after-stop] _Advanced Use Only:_ Should the cluster remove resources from the LRM after they are stopped? Values other than the default are, at best, poorly tested and potentially dangerous. | startup-fencing | TRUE | indexterm:[startup-fencing,Cluster Option] indexterm:[Cluster,Option,startup-fencing] _Advanced Use Only:_ Should the cluster shoot unseen nodes? Not using the default is very unsafe! | election-timeout | 2min | indexterm:[election-timeout,Cluster Option] indexterm:[Cluster,Option,election-timeout] _Advanced Use Only:_ If you need to adjust this value, it probably indicates the presence of a bug. | shutdown-escalation | 20min | indexterm:[shutdown-escalation,Cluster Option] indexterm:[Cluster,Option,shutdown-escalation] _Advanced Use Only:_ If you need to adjust this value, it probably indicates the presence of a bug. | crmd-integration-timeout | 3min | indexterm:[crmd-integration-timeout,Cluster Option] indexterm:[Cluster,Option,crmd-integration-timeout] _Advanced Use Only:_ If you need to adjust this value, it probably indicates the presence of a bug. | crmd-finalization-timeout | 30min | indexterm:[crmd-finalization-timeout,Cluster Option] indexterm:[Cluster,Option,crmd-finalization-timeout] _Advanced Use Only:_ If you need to adjust this value, it probably indicates the presence of a bug. | crmd-transition-delay | 0s | indexterm:[crmd-transition-delay,Cluster Option] indexterm:[Cluster,Option,crmd-transition-delay] _Advanced Use Only:_ Delay cluster recovery for the configured interval to allow for additional/related events to occur. Useful if your configuration is sensitive to the order in which ping updates arrive. Enabling this option will slow down cluster recovery under all conditions. |default-resource-stickiness | 0 | indexterm:[default-resource-stickiness,Cluster Option] indexterm:[Cluster,Option,default-resource-stickiness] _Deprecated:_ See <> instead | is-managed-default | TRUE | indexterm:[is-managed-default,Cluster Option] indexterm:[Cluster,Option,is-managed-default] _Deprecated:_ See <> instead | default-action-timeout | 20s | indexterm:[default-action-timeout,Cluster Option] indexterm:[Cluster,Option,default-action-timeout] _Deprecated:_ See <> instead |========================================================= -== Querying and Setting Cluster Options == +=== Querying and Setting Cluster Options === indexterm:[Querying,Cluster Option] indexterm:[Setting,Cluster Option] indexterm:[Cluster,Querying Options] indexterm:[Cluster,Setting Options] Cluster options can be queried and modified using the `crm_attribute` tool. To get the current value of +cluster-delay+, you can run: ---- # crm_attribute --query --name cluster-delay ---- which is more simply written as ---- # crm_attribute -G -n cluster-delay ---- If a value is found, you'll see a result like this: ---- # crm_attribute -G -n cluster-delay scope=crm_config name=cluster-delay value=60s ---- If no value is found, the tool will display an error: ---- # crm_attribute -G -n clusta-deway scope=crm_config name=clusta-deway value=(null) Error performing operation: No such device or address ---- To use a different value (for example, 30 seconds), simply run: ---- # crm_attribute --name cluster-delay --update 30s ---- To go back to the cluster's default value, you can delete the value, for example: ---- # crm_attribute --name cluster-delay --delete Deleted crm_config option: id=cib-bootstrap-options-cluster-delay name=cluster-delay ---- -== When Options are Listed More Than Once == +=== When Options are Listed More Than Once === If you ever see something like the following, it means that the option you're modifying is present more than once. .Deleting an option that is listed twice ======= ------ # crm_attribute --name batch-limit --delete Multiple attributes match name=batch-limit in crm_config: Value: 50 (set=cib-bootstrap-options, id=cib-bootstrap-options-batch-limit) Value: 100 (set=custom, id=custom-batch-limit) Please choose from one of the matches above and supply the 'id' with --id ------- ======= In such cases, follow the on-screen instructions to perform the requested action. To determine which value is currently being used by the cluster, refer to <>. diff --git a/doc/Pacemaker_Explained/en-US/Ch-Resource-Templates.txt b/doc/Pacemaker_Explained/en-US/Ch-Resource-Templates.txt index 8c880ac1b9..06cf32e8ac 100644 --- a/doc/Pacemaker_Explained/en-US/Ch-Resource-Templates.txt +++ b/doc/Pacemaker_Explained/en-US/Ch-Resource-Templates.txt @@ -1,230 +1,232 @@ = Resource Templates = -== Abstract == - If you want to create lots of resources with similar configurations, defining a resource template simplifies the task. Once defined, it can be referenced in primitives or in certain types of constraints. == Configuring Resources with Templates == The primitives referencing the template will inherit all meta-attributes, instance attributes, utilization attributes and operations defined in the template. And you can define specific attributes and operations for any of the primitives. If any of these are defined in both the template and the primitive, the values defined in the primitive will take precedence over the ones defined in the template. Hence, resource templates help to reduce the amount of configuration work. If any changes are needed, they can be done to the template definition and will take effect globally in all resource definitions referencing that template. Resource templates have a syntax similar to that of primitives. .Resource template for a migratable Xen virtual machine ==== [source,XML] ---- ---- ==== Once you define a resource template, you can use it in primitives by specifying the +template+ property. .Xen primitive resource using a resource template ==== [source,XML] ---- ---- ==== In the example above, the new primitive +vm1+ will inherit everything from +vm-template+. For example, the equivalent of the above two examples would be: .Equivalent Xen primitive resource not using a resource template ==== [source,XML] ---- ---- ==== If you want to overwrite some attributes or operations, add them to the particular primitive's definition. .Xen resource overriding template values ==== [source,XML] ---- ---- ==== In the example above, the new primitive +vm2+ has special attribute values. Its +monitor+ operation has a longer +timeout+ and +interval+, and the primitive has an additional +stop+ operation. To see the resulting definition of a resource, run: ---- # crm_resource --query-xml --resource vm2 ---- To see the raw definition of a resource in the CIB, run: ---- # crm_resource --query-xml-raw --resource vm2 ---- == Referencing Templates in Constraints == A resource template can be referenced in the following types of constraints: - +order+ constraints (see <>) - +colocation+ constraints (see <>) - +rsc_ticket+ constraints (for multi-site clusters as described in <>) Resource templates referenced in constraints stand for all primitives which are derived from that template. This means, the constraint applies to all primitive resources referencing the resource template. Referencing resource templates in constraints is an alternative to resource sets and can simplify the cluster configuration considerably. For example, given the example templates earlier in this chapter: [source,XML] would colocate all VMs with +base-rsc+ and is the equivalent of the following constraint configuration: [source,XML] ---- ---- [NOTE] ====== In a colocation constraint, only one template may be referenced from either `rsc` or `with-rsc`; the other reference must be a regular resource. ====== +=== Referencing Resource Templates in Sequential Resource Sets === + Resource templates can also be referenced in resource sets. For example: [source,XML] ---- ---- is the equivalent of the following constraint configuration: [source,XML] ---- ---- +=== Referencing Resource Templates in Parallel Resource Sets === + If the resources referencing the template can run in parallel: [source,XML] ---- ---- is the equivalent of the following constraint configuration: [source,XML] ---- ----