diff --git a/.gitignore b/.gitignore index 36bebf0560..536013518b 100644 --- a/.gitignore +++ b/.gitignore @@ -1,207 +1,212 @@ # Common \#* .\#* GPATH GRTAGS GTAGS TAGS Makefile Makefile.in .deps .dirstamp .libs *.pc *.pyc *.bz2 *.tar.gz *.rpm *.la *.lo *.o *~ *.gcda *.gcno # Autobuild aclocal.m4 autoconf autoheader autom4te.cache/ automake build.counter compile config.guess config.log config.status config.sub configure depcomp install-sh include/stamp-* libtool libtool.m4 ltdl.m4 libltdl ltmain.sh missing py-compile /m4/argz.m4 /m4/ltargz.m4 /m4/ltoptions.m4 /m4/ltsugar.m4 /m4/ltversion.m4 /m4/lt~obsolete.m4 test-driver ylwrap # Configure targets Doxyfile /cts/CTS.py /cts/CTSlab.py /cts/CTSvars.py /cts/LSBDummy /cts/OCFIPraTest.py /cts/benchmark/clubench /cts/cluster_test /cts/cts /cts/cts-cli /cts/cts-coverage /cts/cts-exec /cts/cts-fencing /cts/cts-log-watcher /cts/cts-regression /cts/cts-scheduler /cts/cts-support /cts/fence_dummy /cts/lxc_autogen.sh /cts/pacemaker-cts-dummyd /cts/pacemaker-cts-dummyd@.service /daemons/execd/pacemaker_remote /daemons/execd/pacemaker_remote.service /daemons/fenced/fence_legacy /daemons/pacemakerd/pacemaker /daemons/pacemakerd/pacemaker.combined.upstart /daemons/pacemakerd/pacemaker.service /daemons/pacemakerd/pacemaker.upstart -extra/logrotate/pacemaker +/extra/logrotate/pacemaker +/extra/resources/ClusterMon +/extra/resources/HealthSMART +/extra/resources/SysInfo +/extra/resources/ifspeed +/extra/resources/o2cb include/config.h include/config.h.in include/crm_config.h publican.cfg /tools/cibsecret /tools/crm_error /tools/crm_failcount /tools/crm_master /tools/crm_mon.service /tools/crm_mon.upstart /tools/crm_report /tools/crm_standby /tools/report.collector /tools/report.common # Build targets *.7 *.7.xml *.7.html *.8 *.8.xml *.8.html doc/*/en-US/images/*.png doc/*/tmp/** doc/*/publish /daemons/attrd/pacemaker-attrd /daemons/based/pacemaker-based /daemons/based/cibmon /daemons/controld/pacemaker-controld /daemons/execd/cts-exec-helper /daemons/execd/pacemaker-execd /daemons/execd/pacemaker-remoted /daemons/fenced/cts-fence-helper /daemons/fenced/pacemaker-fenced /daemons/fenced/pacemaker-fenced.xml /daemons/pacemakerd/pacemakerd /daemons/schedulerd/pacemaker-schedulerd /daemons/schedulerd/pacemaker-schedulerd.xml /daemons/schedulerd/ptest doc/api/* doc/Clusters_from_Scratch.txt doc/Pacemaker_Explained.txt doc/acls.html doc/crm_fencing.html doc/publican-catalog* scratch /tools/attrd_updater /tools/cibadmin /tools/crmadmin /tools/crm_attribute /tools/crm_diff /tools/crm_mon /tools/crm_node /tools/crm_resource /tools/crm_shadow /tools/crm_simulate /tools/crm_ticket /tools/crm_verify /tools/iso8601 /tools/stonith_admin xml/crm.dtd xml/pacemaker*.rng xml/versions.rng doc/shared/en-US/*.xml doc/Clusters_from_Scratch.build doc/Clusters_from_Scratch/en-US/Ap-*.xml doc/Clusters_from_Scratch/en-US/Ch-*.xml doc/Pacemaker_Administration.build doc/Pacemaker_Administration/en-US/Ch-*.xml doc/Pacemaker_Development.build doc/Pacemaker_Development/en-US/Ch-*.xml doc/Pacemaker_Explained.build doc/Pacemaker_Explained/en-US/Ch-*.xml doc/Pacemaker_Explained/en-US/Ap-*.xml doc/Pacemaker_Remote.build doc/Pacemaker_Remote/en-US/Ch-*.xml lib/gnu/libgnu.a lib/gnu/stdalign.h *.coverity # Test detritus /cts/.regression.failed.diff /cts/scheduler/*.ref /cts/scheduler/*.up /cts/scheduler/*.up.err /cts/scheduler/bug-rh-1097457.log /cts/scheduler/bug-rh-1097457.trs /cts/scheduler/shadow.* /cts/test-suite.log /xml/test-2/*.up /xml/test-2/*.up.err # Formerly built files (helps when jumping back and forth in checkout) /attrd /cib /coverage.sh /crmd /cts/HBDummy /fencing /lrmd /mcp /pengine #Other mock HTML pacemaker*.spec coverity-* compat_reports .ABI-build abi_dumps logs *.patch *.diff *.sed *.orig *.rej *.swp diff --git a/configure.ac b/configure.ac index cea05461d5..f21c0cfaa6 100644 --- a/configure.ac +++ b/configure.ac @@ -1,1805 +1,1810 @@ dnl dnl autoconf for Pacemaker dnl dnl Copyright 2009-2018 Andrew Beekhof dnl dnl This source code is licensed under the GNU General Public License version 2 dnl or later (GPLv2+) WITHOUT ANY WARRANTY. dnl =============================================== dnl Bootstrap dnl =============================================== AC_PREREQ(2.64) AC_CONFIG_MACRO_DIR([m4]) AC_DEFUN([AC_DATAROOTDIR_CHECKED]) dnl Suggested structure: dnl information on the package dnl checks for programs dnl checks for libraries dnl checks for header files dnl checks for types dnl checks for structures dnl checks for compiler characteristics dnl checks for library functions dnl checks for system services m4_include([version.m4]) AC_INIT([pacemaker], VERSION_NUMBER, [users@clusterlabs.org], [pacemaker], PCMK_URL) PCMK_FEATURES="" AC_CONFIG_AUX_DIR(.) AC_CANONICAL_HOST dnl Where #defines go (e.g. `AC_CHECK_HEADERS' below) dnl dnl Internal header: include/config.h dnl - Contains ALL defines dnl - include/config.h.in is generated automatically by autoheader dnl - NOT to be included in any header files except crm_internal.h dnl (which is also not to be included in any other header files) dnl dnl External header: include/crm_config.h dnl - Contains a subset of defines checked here dnl - Manually edit include/crm_config.h.in to have configure include dnl new defines dnl - Should not include HAVE_* defines dnl - Safe to include anywhere AM_CONFIG_HEADER(include/config.h include/crm_config.h) AC_ARG_WITH(version, [ --with-version=version Override package version (if you are a packager needing to pretend) ], [ PACKAGE_VERSION="$withval" ]) AC_ARG_WITH(pkg-name, [ --with-pkg-name=name Override package name (if you are a packager needing to pretend) ], [ PACKAGE_NAME="$withval" ]) dnl 1.11: minimum automake version required dnl foreign: don't require GNU-standard top-level files dnl silent-rules: allow "--enable-silent-rules" (no-op in 1.13+) dnl subdir-objects: keep .o's with their .c's (no-op in 2.0+) AM_INIT_AUTOMAKE([1.11 foreign silent-rules subdir-objects]) dnl Example 2.4. Silent Custom Rule to Generate a File dnl %-bar.pc: %.pc dnl $(AM_V_GEN)$(LN_S) $(notdir $^) $@ AC_DEFINE_UNQUOTED(PACEMAKER_VERSION, "$PACKAGE_VERSION", [Current pacemaker version]) dnl Versioned attributes implementation is not yet production-ready AC_DEFINE_UNQUOTED(ENABLE_VERSIONED_ATTRS, 0, [Enable versioned attributes]) PACKAGE_SERIES=`echo $PACKAGE_VERSION | awk -F. '{ print $1"."$2 }'` AC_SUBST(PACKAGE_SERIES) AC_SUBST(PACKAGE_VERSION) CC_IN_CONFIGURE=yes export CC_IN_CONFIGURE LDD=ldd dnl ======================================================================== dnl Compiler characteristics dnl ======================================================================== AC_PROG_CC dnl Can force other with environment variable "CC". AC_PROG_CC_STDC gl_EARLY gl_INIT LT_INIT([dlopen]) LTDL_INIT([convenience]) AC_TYPE_SIZE_T AC_CHECK_SIZEOF(char) AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) AC_CHECK_SIZEOF(long long) dnl =============================================== dnl Helpers dnl =============================================== cc_supports_flag() { local CFLAGS="-Werror $@" AC_MSG_CHECKING(whether $CC supports "$@") AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[ ]])], [RC=0; AC_MSG_RESULT(yes)], [RC=1; AC_MSG_RESULT(no)]) return $RC } # Some tests need to use their own CFLAGS cc_temp_flags() { ac_save_CFLAGS="$CFLAGS" CFLAGS="$*" } cc_restore_flags() { CFLAGS=$ac_save_CFLAGS } dnl =============================================== dnl Configure Options dnl =============================================== dnl Some systems, like Solaris require a custom package name AC_ARG_WITH(pkgname, [ --with-pkgname=name name for pkg (typically for Solaris) ], [ PKGNAME="$withval" ], [ PKGNAME="LXHAhb" ], ) AC_SUBST(PKGNAME) AC_ARG_ENABLE([ansi], [ --enable-ansi Force GCC to compile to ANSI standard for older compilers. @<:@no@:>@]) AC_ARG_ENABLE([fatal-warnings], [ --enable-fatal-warnings Enable pedantic and fatal warnings for gcc @<:@yes@:>@]) AC_ARG_ENABLE([quiet], [ --enable-quiet Suppress make output unless there is an error @<:@no@:>@]) AC_ARG_ENABLE([no-stack], [ --enable-no-stack Build only the scheduler and its requirements @<:@no@:>@]) AC_ARG_ENABLE([upstart], [ --enable-upstart Enable support for managing resources via Upstart @<:@try@:>@ ], [], [enable_upstart=try], ) AC_ARG_ENABLE([systemd], [ --enable-systemd Enable support for managing resources via systemd @<:@try@:>@], [], [enable_systemd=try], ) AC_ARG_ENABLE(hardening, [ --enable-hardening Harden the resulting executables/libraries @<:@try@:>@], [ HARDENING="${enableval}" ], [ HARDENING=try ], ) # By default, we add symlinks at the pre-2.0.0 daemon name locations, so that: # (1) tools that directly invoke those names for metadata etc. will still work # (2) this installation can be used in a bundle container image used with # cluster hosts running Pacemaker 1.1.17+ # If you know your target systems will not have any need for it, you can # disable this option. Once the above use cases are no longer in wide use, we # can disable this option by default, and once we no longer want to support # them at all, we can drop the option altogether. AC_ARG_ENABLE(legacy-links, [ --enable-legacy-links Add symlinks for old daemon names @<:@yes@:>@], [ LEGACY_LINKS="${enableval}" ], [ LEGACY_LINKS=yes ], ) AM_CONDITIONAL(BUILD_LEGACY_LINKS, test "x${LEGACY_LINKS}" = "xyes") AC_ARG_WITH(corosync, [ --with-corosync Support the Corosync messaging and membership layer ], [ SUPPORT_CS=$withval ], [ SUPPORT_CS=try ], ) AC_ARG_WITH(nagios, [ --with-nagios Support nagios remote monitoring ], [ SUPPORT_NAGIOS=$withval ], [ SUPPORT_NAGIOS=try ], ) AC_ARG_WITH(nagios-plugin-dir, [ --with-nagios-plugin-dir=DIR Directory for nagios plugins @<:@LIBEXECDIR/nagios/plugins@:>@], [ NAGIOS_PLUGIN_DIR="$withval" ] ) AC_ARG_WITH(nagios-metadata-dir, [ --with-nagios-metadata-dir=DIR Directory for nagios plugins metadata @<:@DATADIR/nagios/plugins-metadata@:>@], [ NAGIOS_METADATA_DIR="$withval" ] ) AC_ARG_WITH(acl, [ --with-acl Support CIB ACL ], [ SUPPORT_ACL=$withval ], [ SUPPORT_ACL=yes ], ) AC_ARG_WITH(cibsecrets, [ --with-cibsecrets Support separate file for CIB secrets ], [ SUPPORT_CIBSECRETS=$withval ], [ SUPPORT_CIBSECRETS=no ], ) PCMK_GNUTLS_PRIORITIES="NORMAL" AC_ARG_WITH(gnutls-priorities, [ --with-gnutls-priorities GnuTLS cipher priorities @<:@NORMAL@:>@ ], [ test x"$withval" = x"no" || PCMK_GNUTLS_PRIORITIES="$withval" ]) INITDIR="" AC_ARG_WITH(initdir, [ --with-initdir=DIR Directory for init (rc) scripts], [ INITDIR="$withval" ]) SUPPORT_PROFILING=0 AC_ARG_WITH(profiling, [ --with-profiling Disable optimizations for effective profiling ], [ SUPPORT_PROFILING=$withval ]) AC_ARG_WITH(coverage, [ --with-coverage Disable optimizations for effective profiling ], [ SUPPORT_COVERAGE=$withval ]) PUBLICAN_BRAND="common" AC_ARG_WITH(brand, [ --with-brand=brand Brand to use for generated documentation (set empty for no docs) @<:@common@:>@], [ test x"$withval" = x"no" || PUBLICAN_BRAND="$withval" ]) AC_SUBST(PUBLICAN_BRAND) CONFIGDIR="" AC_ARG_WITH(configdir, [ --with-configdir=DIR Directory for Pacemaker configuration file @<:@SYSCONFDIR/sysconfig@:>@], [ CONFIGDIR="$withval" ] ) CRM_LOG_DIR="" AC_ARG_WITH(logdir, [ --with-logdir=DIR Directory for Pacemaker log file @<:@LOCALSTATEDIR/log/pacemaker@:>@ ], [ CRM_LOG_DIR="$withval" ] ) CRM_BUNDLE_DIR="" AC_ARG_WITH(bundledir, [ --with-bundledir=DIR Directory for Pacemaker bundle logs @<:@LOCALSTATEDIR/log/pacemaker/bundles@:>@ ], [ CRM_BUNDLE_DIR="$withval" ] ) dnl =============================================== dnl General Processing dnl =============================================== AC_PROG_LN_S AC_PROG_MKDIR_P if cc_supports_flag -Werror; then WERROR="-Werror" else WERROR="" fi # Normalize enable_fatal_warnings (defaulting to yes, when compiler supports it) if test "x${enable_fatal_warnings}" != "xno" ; then if test "$GCC" = "yes" && test "x${WERROR}" != "x" ; then enable_fatal_warnings=yes else AC_MSG_NOTICE(Compiler does not support fatal warnings) enable_fatal_warnings=no fi fi INIT_EXT="" echo Our Host OS: $host_os/$host AC_MSG_NOTICE(Sanitizing prefix: ${prefix}) case $prefix in NONE) prefix=/usr dnl Fix default variables - "prefix" variable if not specified if test "$localstatedir" = "\${prefix}/var"; then localstatedir="/var" fi if test "$sysconfdir" = "\${prefix}/etc"; then sysconfdir="/etc" fi ;; esac AC_MSG_NOTICE(Sanitizing exec_prefix: ${exec_prefix}) case $exec_prefix in prefix|NONE) exec_prefix=$prefix ;; esac AC_MSG_NOTICE(Sanitizing INITDIR: ${INITDIR}) case $INITDIR in prefix) INITDIR=$prefix;; "") AC_MSG_CHECKING(which init (rc) directory to use) for initdir in /etc/init.d /etc/rc.d/init.d /sbin/init.d \ /usr/local/etc/rc.d /etc/rc.d do if test -d $initdir then INITDIR=$initdir break fi done AC_MSG_RESULT($INITDIR) ;; esac AC_SUBST(INITDIR) AC_MSG_NOTICE(Sanitizing libdir: ${libdir}) case $libdir in prefix|NONE) AC_MSG_CHECKING(which lib directory to use) for aDir in lib64 lib do trydir="${exec_prefix}/${aDir}" if test -d ${trydir} then libdir=${trydir} break fi done AC_MSG_RESULT($libdir); ;; esac dnl Expand autoconf variables so that we don't end up with '${prefix}' dnl in #defines and python scripts dnl NOTE: Autoconf deliberately leaves them unexpanded to allow dnl make exec_prefix=/foo install dnl No longer being able to do this seems like no great loss to me... eval prefix="`eval echo ${prefix}`" eval exec_prefix="`eval echo ${exec_prefix}`" eval bindir="`eval echo ${bindir}`" eval sbindir="`eval echo ${sbindir}`" eval libexecdir="`eval echo ${libexecdir}`" eval datadir="`eval echo ${datadir}`" eval sysconfdir="`eval echo ${sysconfdir}`" eval sharedstatedir="`eval echo ${sharedstatedir}`" eval localstatedir="`eval echo ${localstatedir}`" eval libdir="`eval echo ${libdir}`" eval includedir="`eval echo ${includedir}`" eval oldincludedir="`eval echo ${oldincludedir}`" eval infodir="`eval echo ${infodir}`" eval mandir="`eval echo ${mandir}`" dnl Home-grown variables eval INITDIR="${INITDIR}" eval docdir="`eval echo ${docdir}`" if test x"${docdir}" = x""; then docdir=${datadir}/doc/${PACKAGE}-${VERSION} fi AC_SUBST(docdir) if test x"${CONFIGDIR}" = x""; then CONFIGDIR="${sysconfdir}/sysconfig" fi AC_SUBST(CONFIGDIR) if test x"${CRM_LOG_DIR}" = x""; then CRM_LOG_DIR="${localstatedir}/log/pacemaker" fi AC_DEFINE_UNQUOTED(CRM_LOG_DIR,"$CRM_LOG_DIR", Location for Pacemaker log file) AC_SUBST(CRM_LOG_DIR) if test x"${CRM_BUNDLE_DIR}" = x""; then CRM_BUNDLE_DIR="${localstatedir}/log/pacemaker/bundles" fi AC_DEFINE_UNQUOTED(CRM_BUNDLE_DIR,"$CRM_BUNDLE_DIR", Location for Pacemaker bundle logs) AC_SUBST(CRM_BUNDLE_DIR) if test x"${PCMK_GNUTLS_PRIORITIES}" = x""; then AC_MSG_ERROR([Empty string not applicable with --with-gnutls-priorities]) fi AC_DEFINE_UNQUOTED([PCMK_GNUTLS_PRIORITIES], ["$PCMK_GNUTLS_PRIORITIES"], [GnuTLS cipher priorities]) for j in prefix exec_prefix bindir sbindir libexecdir datadir sysconfdir \ sharedstatedir localstatedir libdir includedir oldincludedir infodir \ mandir INITDIR docdir CONFIGDIR do dirname=`eval echo '${'${j}'}'` if test ! -d "$dirname" then AC_MSG_WARN([$j directory ($dirname) does not exist!]) fi done dnl This OS-based decision-making is poor autotools practice; dnl feature-based mechanisms are strongly preferred. dnl dnl So keep this section to a bare minimum; regard as a "necessary evil". case "$host_os" in *bsd*) AC_DEFINE_UNQUOTED(ON_BSD, 1, Compiling for BSD platform) LIBS="-L/usr/local/lib" CPPFLAGS="$CPPFLAGS -I/usr/local/include" INIT_EXT=".sh" ;; *solaris*) AC_DEFINE_UNQUOTED(ON_SOLARIS, 1, Compiling for Solaris platform) ;; *linux*) AC_DEFINE_UNQUOTED(ON_LINUX, 1, Compiling for Linux platform) ;; darwin*) AC_DEFINE_UNQUOTED(ON_DARWIN, 1, Compiling for Darwin platform) LIBS="$LIBS -L${prefix}/lib" CFLAGS="$CFLAGS -I${prefix}/include" ;; esac AC_SUBST(INIT_EXT) AC_MSG_NOTICE(Host CPU: $host_cpu) case "$host_cpu" in ppc64|powerpc64) case $CFLAGS in *powerpc64*) ;; *) if test "$GCC" = yes; then CFLAGS="$CFLAGS -m64" fi ;; esac ;; esac AC_MSG_CHECKING(which format is needed to print uint64_t) cc_temp_flags "-Wall $WERROR" AC_COMPILE_IFELSE( [AC_LANG_PROGRAM( [ #include #include #include ], [ int max = 512; uint64_t bignum = 42; char *buffer = malloc(max); const char *random = "random"; snprintf(buffer, max-1, "", bignum, random); fprintf(stderr, "Result: %s\n", buffer); ] )], [U64T="%lu"], [U64T="%llu"] ) cc_restore_flags AC_MSG_RESULT($U64T) AC_DEFINE_UNQUOTED(U64T, "$U64T", Correct printf format for logging uint64_t) dnl =============================================== dnl Program Paths dnl =============================================== PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin" export PATH dnl Replacing AC_PROG_LIBTOOL with AC_CHECK_PROG because LIBTOOL dnl was NOT being expanded all the time thus causing things to fail. AC_CHECK_PROGS(LIBTOOL, glibtool libtool libtool15 libtool13) dnl Pacemaker's executable python scripts will invoke the python specified by dnl configure's PYTHON variable. If not specified, AM_PATH_PYTHON will check a dnl built-in list with (unversioned) "python" having precedence. To configure dnl Pacemaker to use a specific python interpreter version, define PYTHON dnl when calling configure, for example: ./configure PYTHON=/usr/bin/python3.6 dnl Ensure PYTHON is an absolute path AC_PATH_PROG([PYTHON], [$PYTHON]) case "x$PYTHON" in x*python3*) dnl When used with Python 3, Pacemaker requires a minimum of 3.2 AM_PATH_PYTHON([3.2]) ;; *) dnl Otherwise, Pacemaker requires a minimum of 2.7 AM_PATH_PYTHON([2.7]) ;; esac AC_CHECK_PROGS(MAKE, gmake make) AC_PATH_PROGS(HTML2TXT, lynx w3m) AC_PATH_PROGS(HELP2MAN, help2man) AC_PATH_PROGS(POD2MAN, pod2man, pod2man) AC_PATH_PROGS(ASCIIDOC, asciidoc) AC_PATH_PROGS(PUBLICAN, publican) AC_PATH_PROGS(INKSCAPE, inkscape) AC_PATH_PROGS(XSLTPROC, xsltproc) AC_PATH_PROGS(XMLCATALOG, xmlcatalog) AC_PATH_PROGS(FOP, fop) AC_PATH_PROGS(SSH, ssh, /usr/bin/ssh) AC_PATH_PROGS(SCP, scp, /usr/bin/scp) AC_PATH_PROGS(TAR, tar) AC_PATH_PROGS(MD5, md5) dnl BASH is already an environment variable, so use something else AC_PATH_PROG([BASH_PATH], [bash]) AC_PATH_PROGS(TEST, test) PKG_PROG_PKG_CONFIG AC_PATH_PROGS(VALGRIND_BIN, valgrind, /usr/bin/valgrind) AC_DEFINE_UNQUOTED(VALGRIND_BIN, "$VALGRIND_BIN", Valgrind command) if test x"${LIBTOOL}" = x""; then AC_MSG_ERROR(You need (g)libtool installed in order to build ${PACKAGE}) fi if test x"${MAKE}" = x""; then AC_MSG_ERROR(You need (g)make installed in order to build ${PACKAGE}) fi dnl Bash is needed for building man pages and running regression tests if test x"${BASH_PATH}" = x""; then AC_MSG_ERROR(bash must be installed in order to build ${PACKAGE}) fi AM_CONDITIONAL(BUILD_HELP, test x"${HELP2MAN}" != x"") if test x"${HELP2MAN}" != x""; then PCMK_FEATURES="$PCMK_FEATURES generated-manpages" fi MANPAGE_XSLT="" if test x"${XSLTPROC}" != x""; then AC_MSG_CHECKING(docbook to manpage transform) # first try to figure out correct template using xmlcatalog query, # resort to extensive (semi-deterministic) file search if that fails DOCBOOK_XSL_URI='http://docbook.sourceforge.net/release/xsl/current' DOCBOOK_XSL_PATH='manpages/docbook.xsl' MANPAGE_XSLT=$(${XMLCATALOG} "" ${DOCBOOK_XSL_URI}/${DOCBOOK_XSL_PATH} \ | sed -n 's|^file://||p;q') if test x"${MANPAGE_XSLT}" = x""; then DIRS=$(find "${datadir}" -name $(basename $(dirname ${DOCBOOK_XSL_PATH})) \ -type d | LC_ALL=C sort) XSLT=$(basename ${DOCBOOK_XSL_PATH}) for d in ${DIRS}; do if test -f "${d}/${XSLT}"; then MANPAGE_XSLT="${d}/${XSLT}" break fi done fi fi AC_MSG_RESULT($MANPAGE_XSLT) AC_SUBST(MANPAGE_XSLT) AM_CONDITIONAL(BUILD_XML_HELP, test x"${MANPAGE_XSLT}" != x"") if test x"${MANPAGE_XSLT}" != x""; then PCMK_FEATURES="$PCMK_FEATURES agent-manpages" fi AM_CONDITIONAL(BUILD_ASCIIDOC, test x"${ASCIIDOC}" != x"") if test x"${ASCIIDOC}" != x""; then PCMK_FEATURES="$PCMK_FEATURES ascii-docs" fi publican_intree_brand=no if test x"${PUBLICAN_BRAND}" != x"" \ && test x"${PUBLICAN}" != x"" \ && test x"${INKSCAPE}" != x""; then dnl special handling for clusterlabs brand (possibly in-tree version used) test "${PUBLICAN_BRAND}" != "clusterlabs" \ || test -d /usr/share/publican/Common_Content/clusterlabs if test $? -ne 0; then dnl Unknown option: brand_dir vs. Option brand_dir requires an argument if ${PUBLICAN} build --brand_dir 2>&1 | grep -Eq 'brand_dir$'; then AC_MSG_WARN([Cannot use in-tree clusterlabs brand, resorting to common]) PUBLICAN_BRAND=common else publican_intree_brand=yes fi fi AC_MSG_NOTICE([Enabling Publican-generated documentation using ${PUBLICAN_BRAND} brand]) PCMK_FEATURES="$PCMK_FEATURES publican-docs" fi AM_CONDITIONAL([BUILD_DOCBOOK], [test x"${PUBLICAN_BRAND}" != x"" \ && test x"${PUBLICAN}" != x"" \ && test x"${INKSCAPE}" != x""]) AM_CONDITIONAL([PUBLICAN_INTREE_BRAND], [test x"${publican_intree_brand}" = x"yes"]) dnl Pacemaker's shell scripts (and thus man page builders) rely on GNU getopt AC_MSG_CHECKING([for GNU-compatible getopt]) IFS_orig=$IFS IFS=: for PATH_DIR in $PATH; do IFS=$IFS_orig GETOPT_PATH="${PATH_DIR}/getopt" if test -f "$GETOPT_PATH" && test -x "$GETOPT_PATH" ; then $GETOPT_PATH -T >/dev/null 2>/dev/null if test $? -eq 4; then break fi fi GETOPT_PATH="" done IFS=$IFS_orig if test -n "$GETOPT_PATH"; then AC_MSG_RESULT([$GETOPT_PATH]) else AC_MSG_RESULT([no]) AC_MSG_ERROR(Pacemaker build requires a GNU-compatible getopt) fi AC_SUBST([GETOPT_PATH]) dnl ======================================================================== dnl checks for library functions to replace them dnl dnl NoSuchFunctionName: dnl is a dummy function which no system supplies. It is here to make dnl the system compile semi-correctly on OpenBSD which doesn't know dnl how to create an empty archive dnl dnl scandir: Only on BSD. dnl System-V systems may have it, but hidden and/or deprecated. dnl A replacement function is supplied for it. dnl dnl setenv: is some bsdish function that should also be avoided (use dnl putenv instead) dnl On the other hand, putenv doesn't provide the right API for the dnl code and has memory leaks designed in (sigh...) Fortunately this dnl A replacement function is supplied for it. dnl dnl strerror: returns a string that corresponds to an errno. dnl A replacement function is supplied for it. dnl dnl strnlen: is a gnu function similar to strlen, but safer. dnl We wrote a tolearably-fast replacement function for it. dnl dnl strndup: is a gnu function similar to strdup, but safer. dnl We wrote a tolearably-fast replacement function for it. AC_REPLACE_FUNCS(alphasort NoSuchFunctionName scandir setenv strerror strchrnul unsetenv strnlen strndup) dnl =============================================== dnl Libraries dnl =============================================== AC_CHECK_LIB(socket, socket) dnl -lsocket AC_CHECK_LIB(c, dlopen) dnl if dlopen is in libc... AC_CHECK_LIB(dl, dlopen) dnl -ldl (for Linux) AC_CHECK_LIB(rt, sched_getscheduler) dnl -lrt (for Tru64) AC_CHECK_LIB(gnugetopt, getopt_long) dnl -lgnugetopt ( if available ) AC_CHECK_LIB(pam, pam_start) dnl -lpam (if available) AC_CHECK_FUNCS([sched_setscheduler]) AC_CHECK_LIB(uuid, uuid_parse) dnl load the library if necessary AC_CHECK_FUNCS(uuid_unparse) dnl OSX ships uuid_* as standard functions AC_CHECK_HEADERS(uuid/uuid.h) if test "x$ac_cv_func_uuid_unparse" != xyes; then AC_MSG_ERROR(You do not have the libuuid development package installed) fi if test x"${PKG_CONFIG}" = x""; then AC_MSG_ERROR(You need pkgconfig installed in order to build ${PACKAGE}) fi # Require glib 2.16.0 (2008-03) or later for g_hash_table_iter_init() etc. PKG_CHECK_MODULES([GLIB], [glib-2.0 >= 2.16.0], [CPPFLAGS="${CPPFLAGS} ${GLIB_CFLAGS}" LIBS="${LIBS} ${GLIB_LIBS}"]) # # Where is dlopen? # if test "$ac_cv_lib_c_dlopen" = yes; then LIBADD_DL="" elif test "$ac_cv_lib_dl_dlopen" = yes; then LIBADD_DL=-ldl else LIBADD_DL=${lt_cv_dlopen_libs} fi dnl FreeBSD needs -lcompat for ftime() used by lrmd.c AC_CHECK_LIB([compat], [ftime], [COMPAT_LIBS='-lcompat']) AC_SUBST(COMPAT_LIBS) dnl ======================================================================== dnl Headers dnl ======================================================================== dnl Some distributions insert #warnings into deprecated headers such as dnl timeb.h. If we will enable fatal warnings for the build, then enable dnl them for the header checks as well, otherwise the build could fail dnl even though the header check succeeds. (We should probably be doing dnl this in more places.) if test "x${enable_fatal_warnings}" = xyes ; then cc_temp_flags "$CFLAGS $WERROR" fi AC_CHECK_HEADERS(arpa/inet.h) AC_CHECK_HEADERS(ctype.h) AC_CHECK_HEADERS(dirent.h) AC_CHECK_HEADERS(errno.h) AC_CHECK_HEADERS(getopt.h) AC_CHECK_HEADERS(glib.h) AC_CHECK_HEADERS(grp.h) AC_CHECK_HEADERS(limits.h) AC_CHECK_HEADERS(linux/swab.h) AC_CHECK_HEADERS(malloc.h) AC_CHECK_HEADERS(netdb.h) AC_CHECK_HEADERS(netinet/in.h) AC_CHECK_HEADERS(netinet/ip.h) AC_CHECK_HEADERS(pwd.h) AC_CHECK_HEADERS(sgtty.h) AC_CHECK_HEADERS(signal.h) AC_CHECK_HEADERS(stdarg.h) AC_CHECK_HEADERS(stddef.h) AC_CHECK_HEADERS(stdio.h) AC_CHECK_HEADERS(stdlib.h) AC_CHECK_HEADERS(string.h) AC_CHECK_HEADERS(strings.h) AC_CHECK_HEADERS(sys/dir.h) AC_CHECK_HEADERS(sys/ioctl.h) AC_CHECK_HEADERS(sys/param.h) AC_CHECK_HEADERS(sys/reboot.h) AC_CHECK_HEADERS(sys/resource.h) AC_CHECK_HEADERS(sys/socket.h) AC_CHECK_HEADERS(sys/signalfd.h) AC_CHECK_HEADERS(sys/sockio.h) AC_CHECK_HEADERS(sys/stat.h) AC_CHECK_HEADERS(sys/time.h) AC_CHECK_HEADERS(sys/timeb.h) AC_CHECK_HEADERS(sys/types.h) AC_CHECK_HEADERS(sys/utsname.h) AC_CHECK_HEADERS(sys/wait.h) AC_CHECK_HEADERS(time.h) AC_CHECK_HEADERS(unistd.h) if test "x${enable_fatal_warnings}" = xyes ; then cc_restore_flags fi dnl These headers need prerequisites before the tests will pass dnl AC_CHECK_HEADERS(net/if.h) PKG_CHECK_MODULES(LIBXML2, [libxml-2.0], [CPPFLAGS="${CPPFLAGS} ${LIBXML2_CFLAGS}" LIBS="${LIBS} ${LIBXML2_LIBS}"]) AC_CHECK_HEADERS(libxml/xpath.h) if test "$ac_cv_header_libxml_xpath_h" != "yes"; then AC_MSG_ERROR(libxml development headers not found) fi AC_CHECK_LIB(xslt, xsltApplyStylesheet, [], AC_MSG_ERROR(Unsupported libxslt library version)) AC_CHECK_HEADERS(libxslt/xslt.h) if test "$ac_cv_header_libxslt_xslt_h" != "yes"; then AC_MSG_ERROR(libxslt development headers not found) fi AC_CACHE_CHECK(whether __progname and __progname_full are available, pf_cv_var_progname, AC_TRY_LINK([extern char *__progname, *__progname_full;], [__progname = "foo"; __progname_full = "foo bar";], pf_cv_var_progname="yes", pf_cv_var_progname="no")) if test "$pf_cv_var_progname" = "yes"; then AC_DEFINE(HAVE___PROGNAME,1,[ ]) fi dnl ======================================================================== dnl Structures dnl ======================================================================== AC_CHECK_MEMBERS([struct tm.tm_gmtoff],,,[[#include ]]) AC_CHECK_MEMBERS([lrm_op_t.rsc_deleted],,,[[#include ]]) AC_CHECK_MEMBER([struct dirent.d_type], AC_DEFINE(HAVE_STRUCT_DIRENT_D_TYPE,1,[Define this if struct dirent has d_type]),, [#include ]) dnl ======================================================================== dnl Functions dnl ======================================================================== AC_CHECK_FUNCS(getopt, AC_DEFINE(HAVE_DECL_GETOPT, 1, [Have getopt function])) AC_CHECK_FUNCS(nanosleep, AC_DEFINE(HAVE_DECL_NANOSLEEP, 1, [Have nanosleep function])) dnl ======================================================================== dnl bzip2 dnl ======================================================================== AC_CHECK_HEADERS(bzlib.h) AC_CHECK_LIB(bz2, BZ2_bzBuffToBuffCompress) if test x$ac_cv_lib_bz2_BZ2_bzBuffToBuffCompress != xyes ; then AC_MSG_ERROR(BZ2 libraries not found) fi if test x$ac_cv_header_bzlib_h != xyes; then AC_MSG_ERROR(BZ2 Development headers not found) fi dnl ======================================================================== dnl sighandler_t is missing from Illumos, Solaris11 systems dnl ======================================================================== AC_MSG_CHECKING([for sighandler_t]) AC_TRY_COMPILE([#include ],[sighandler_t *f;], has_sighandler_t=yes,has_sighandler_t=no) AC_MSG_RESULT($has_sighandler_t) if test "$has_sighandler_t" = "yes" ; then AC_DEFINE( HAVE_SIGHANDLER_T, 1, [Define if sighandler_t available] ) fi dnl ======================================================================== dnl ncurses dnl ======================================================================== dnl dnl A few OSes (e.g. Linux) deliver a default "ncurses" alongside "curses". dnl Many non-Linux deliver "curses"; sites may add "ncurses". dnl dnl However, the source-code recommendation for both is to #include "curses.h" dnl (i.e. "ncurses" still wants the include to be simple, no-'n', "curses.h"). dnl dnl ncurse takes precedence. dnl AC_CHECK_HEADERS(curses.h) AC_CHECK_HEADERS(curses/curses.h) AC_CHECK_HEADERS(ncurses.h) AC_CHECK_HEADERS(ncurses/ncurses.h) dnl Although n-library is preferred, only look for it if the n-header was found. CURSESLIBS='' if test "$ac_cv_header_ncurses_h" = "yes"; then AC_CHECK_LIB(ncurses, printw, [AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]) CURSESLIBS=`$PKG_CONFIG --libs ncurses` || CURSESLIBS='-lncurses' fi if test "$ac_cv_header_ncurses_ncurses_h" = "yes"; then AC_CHECK_LIB(ncurses, printw, [AC_DEFINE(HAVE_LIBNCURSES,1, have ncurses library)]) CURSESLIBS=`$PKG_CONFIG --libs ncurses` || CURSESLIBS='-lncurses' fi dnl Only look for non-n-library if there was no n-library. if test X"$CURSESLIBS" = X"" -a "$ac_cv_header_curses_h" = "yes"; then AC_CHECK_LIB(curses, printw, [CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]) fi dnl Only look for non-n-library if there was no n-library. if test X"$CURSESLIBS" = X"" -a "$ac_cv_header_curses_curses_h" = "yes"; then AC_CHECK_LIB(curses, printw, [CURSESLIBS='-lcurses'; AC_DEFINE(HAVE_LIBCURSES,1, have curses library)]) fi if test "x$CURSESLIBS" != "x"; then PCMK_FEATURES="$PCMK_FEATURES ncurses" fi dnl Check for printw() prototype compatibility if test X"$CURSESLIBS" != X"" && cc_supports_flag -Wcast-qual; then ac_save_LIBS=$LIBS LIBS="$CURSESLIBS" cc_temp_flags "-Wcast-qual $WERROR" # avoid broken test because of hardened build environment in Fedora 23+ # - https://fedoraproject.org/wiki/Changes/Harden_All_Packages # - https://bugzilla.redhat.com/1297985 if cc_supports_flag -fPIC; then CFLAGS="$CFLAGS -fPIC" fi AC_MSG_CHECKING(whether printw() requires argument of "const char *") AC_LINK_IFELSE( [AC_LANG_PROGRAM([ #if defined(HAVE_NCURSES_H) # include #elif defined(HAVE_NCURSES_NCURSES_H) # include #elif defined(HAVE_CURSES_H) # include #endif ], [printw((const char *)"Test");] )], [ac_cv_compatible_printw=yes], [ac_cv_compatible_printw=no] ) LIBS=$ac_save_LIBS cc_restore_flags AC_MSG_RESULT([$ac_cv_compatible_printw]) if test "$ac_cv_compatible_printw" = no; then AC_MSG_WARN([The printw() function of your ncurses or curses library is old, we will disable usage of the library. If you want to use this library anyway, please update to newer version of the library, ncurses 5.4 or later is recommended. You can get the library from http://www.gnu.org/software/ncurses/.]) AC_MSG_NOTICE([Disabling curses]) AC_DEFINE(HAVE_INCOMPATIBLE_PRINTW, 1, [Do we have incompatible printw() in curses library?]) fi fi AC_SUBST(CURSESLIBS) dnl ======================================================================== dnl Profiling and GProf dnl ======================================================================== AC_MSG_NOTICE(Old CFLAGS: $CFLAGS) case $SUPPORT_COVERAGE in 1|yes|true) SUPPORT_PROFILING=1 PCMK_FEATURES="$PCMK_FEATURES coverage" CFLAGS="$CFLAGS -fprofile-arcs -ftest-coverage" dnl During linking, make sure to specify -lgcov or -coverage ;; esac case $SUPPORT_PROFILING in 1|yes|true) SUPPORT_PROFILING=1 dnl Disable various compiler optimizations CFLAGS="$CFLAGS -fno-omit-frame-pointer -fno-inline -fno-builtin " dnl CFLAGS="$CFLAGS -fno-inline-functions -fno-default-inline -fno-inline-functions-called-once -fno-optimize-sibling-calls" dnl Turn off optimization so tools can get accurate line numbers CFLAGS=`echo $CFLAGS | sed -e 's/-O.\ //g' -e 's/-Wp,-D_FORTIFY_SOURCE=.\ //g' -e 's/-D_FORTIFY_SOURCE=.\ //g'` CFLAGS="$CFLAGS -O0 -g3 -gdwarf-2" dnl Update features PCMK_FEATURES="$PCMK_FEATURES profile" ;; *) SUPPORT_PROFILING=0 ;; esac AC_MSG_NOTICE(New CFLAGS: $CFLAGS) AC_DEFINE_UNQUOTED(SUPPORT_PROFILING, $SUPPORT_PROFILING, Support for profiling) dnl ======================================================================== dnl Cluster infrastructure - LibQB dnl ======================================================================== if test x${enable_no_stack} = xyes; then SUPPORT_CS=no fi PKG_CHECK_MODULES(libqb, libqb >= 0.13) CPPFLAGS="$libqb_CFLAGS $CPPFLAGS" LIBS="$libqb_LIBS $LIBS" dnl libqb 0.14.0+ (2012-06) AC_CHECK_LIB(qb, qb_ipcs_connection_auth_set) PCMK_FEATURES="$PCMK_FEATURES libqb-logging libqb-ipc" dnl libqb 0.17.0+ (2014-02) AC_CHECK_FUNCS(qb_ipcs_connection_get_buffer_size, AC_DEFINE(HAVE_IPCS_GET_BUFFER_SIZE, 1, [Have qb_ipcc_get_buffer_size function])) dnl libqb not yet released (as of 2018-05) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_MAX_LINE_LEN]) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_ELLIPSIS]) dnl Support Linux-HA fence agents if available if test "$cross_compiling" != "yes"; then CPPFLAGS="$CPPFLAGS -I${prefix}/include/heartbeat" fi AC_CHECK_HEADERS(stonith/stonith.h) if test "$ac_cv_header_stonith_stonith_h" = "yes"; then dnl On Debian, AC_CHECK_LIBS fail if a library has any unresolved symbols dnl So check for all the dependencies (so they're added to LIBS) before checking for -lplumb AC_CHECK_LIB(pils, PILLoadPlugin) AC_CHECK_LIB(plumb, G_main_add_IPC_Channel) PCMK_FEATURES="$PCMK_FEATURES lha-fencing" fi dnl =============================================== dnl Variables needed for substitution dnl =============================================== CRM_SCHEMA_DIRECTORY="${datadir}/pacemaker" AC_DEFINE_UNQUOTED(CRM_SCHEMA_DIRECTORY,"$CRM_SCHEMA_DIRECTORY", Location for the Pacemaker Relax-NG Schema) AC_SUBST(CRM_SCHEMA_DIRECTORY) CRM_CORE_DIR="${localstatedir}/lib/pacemaker/cores" AC_DEFINE_UNQUOTED(CRM_CORE_DIR,"$CRM_CORE_DIR", Location to store core files produced by Pacemaker daemons) AC_SUBST(CRM_CORE_DIR) CRM_DAEMON_USER="hacluster" AC_DEFINE_UNQUOTED(CRM_DAEMON_USER,"$CRM_DAEMON_USER", User to run Pacemaker daemons as) AC_SUBST(CRM_DAEMON_USER) CRM_DAEMON_GROUP="haclient" AC_DEFINE_UNQUOTED(CRM_DAEMON_GROUP,"$CRM_DAEMON_GROUP", Group to run Pacemaker daemons as) AC_SUBST(CRM_DAEMON_GROUP) CRM_STATE_DIR=${localstatedir}/run/crm AC_DEFINE_UNQUOTED(CRM_STATE_DIR,"$CRM_STATE_DIR", Where to keep state files and sockets) AC_SUBST(CRM_STATE_DIR) CRM_PACEMAKER_DIR=${localstatedir}/lib/pacemaker AC_DEFINE_UNQUOTED(CRM_PACEMAKER_DIR,"$CRM_PACEMAKER_DIR", Location to store directory produced by Pacemaker daemons) AC_SUBST(CRM_PACEMAKER_DIR) CRM_BLACKBOX_DIR=${localstatedir}/lib/pacemaker/blackbox AC_DEFINE_UNQUOTED(CRM_BLACKBOX_DIR,"$CRM_BLACKBOX_DIR", Where to keep blackbox dumps) AC_SUBST(CRM_BLACKBOX_DIR) PE_STATE_DIR="${localstatedir}/lib/pacemaker/pengine" AC_DEFINE_UNQUOTED(PE_STATE_DIR,"$PE_STATE_DIR", Where to keep scheduler outputs) AC_SUBST(PE_STATE_DIR) CRM_CONFIG_DIR="${localstatedir}/lib/pacemaker/cib" AC_DEFINE_UNQUOTED(CRM_CONFIG_DIR,"$CRM_CONFIG_DIR", Where to keep configuration files) AC_SUBST(CRM_CONFIG_DIR) CRM_CONFIG_CTS="${localstatedir}/lib/pacemaker/cts" AC_DEFINE_UNQUOTED(CRM_CONFIG_CTS,"$CRM_CONFIG_CTS", Where to keep cts stateful data) AC_SUBST(CRM_CONFIG_CTS) CRM_DAEMON_DIR="${libexecdir}/pacemaker" AC_DEFINE_UNQUOTED(CRM_DAEMON_DIR,"$CRM_DAEMON_DIR", Location for Pacemaker daemons) AC_SUBST(CRM_DAEMON_DIR) HA_STATE_DIR="${localstatedir}/run" AC_DEFINE_UNQUOTED(HA_STATE_DIR,"$HA_STATE_DIR", Where sbd keeps its PID file) AC_SUBST(HA_STATE_DIR) CRM_RSCTMP_DIR="${localstatedir}/run/resource-agents" AC_DEFINE_UNQUOTED(CRM_RSCTMP_DIR,"$CRM_RSCTMP_DIR", Where resource agents should keep state files) AC_SUBST(CRM_RSCTMP_DIR) PACEMAKER_CONFIG_DIR="${sysconfdir}/pacemaker" AC_DEFINE_UNQUOTED(PACEMAKER_CONFIG_DIR,"$PACEMAKER_CONFIG_DIR", Where to keep configuration files like authkey) AC_SUBST(PACEMAKER_CONFIG_DIR) OCF_ROOT_DIR="/usr/lib/ocf" if test "X$OCF_ROOT_DIR" = X; then AC_MSG_ERROR(Could not locate OCF directory) fi AC_SUBST(OCF_ROOT_DIR) OCF_RA_DIR="$OCF_ROOT_DIR/resource.d" AC_DEFINE_UNQUOTED(OCF_RA_DIR,"$OCF_RA_DIR", Location for OCF RAs) AC_SUBST(OCF_RA_DIR) RH_STONITH_DIR="$sbindir" AC_DEFINE_UNQUOTED(RH_STONITH_DIR,"$RH_STONITH_DIR", Location for Red Hat Stonith agents) AC_DEFINE_UNQUOTED(SBIN_DIR,"$sbindir", Location for system binaries) RH_STONITH_PREFIX="fence_" AC_DEFINE_UNQUOTED(RH_STONITH_PREFIX,"$RH_STONITH_PREFIX", Prefix for Red Hat Stonith agents) AC_PATH_PROGS(GIT, git false) AC_MSG_CHECKING(build version) BUILD_VERSION=$Format:%h$ if test $BUILD_VERSION != ":%h$"; then AC_MSG_RESULT(archive hash: $BUILD_VERSION) elif test -x $GIT -a -d .git; then BUILD_VERSION=`$GIT log --pretty="format:%h" -n 1` AC_MSG_RESULT(git hash: $BUILD_VERSION) else # The current directory name make a reasonable default # Most generated archives will include the hash or tag BASE=`basename $PWD` BUILD_VERSION=`echo $BASE | sed s:.*[[Pp]]acemaker-::` AC_MSG_RESULT(directory based hash: $BUILD_VERSION) fi AC_DEFINE_UNQUOTED(BUILD_VERSION, "$BUILD_VERSION", Build version) AC_SUBST(BUILD_VERSION) HAVE_dbus=1 PKG_CHECK_MODULES([DBUS], [dbus-1], [CPPFLAGS="${CPPFLAGS} ${DBUS_CFLAGS}"], [HAVE_dbus=0]) AC_DEFINE_UNQUOTED(SUPPORT_DBUS, $HAVE_dbus, Support dbus) AM_CONDITIONAL(BUILD_DBUS, test $HAVE_dbus = 1) AC_CHECK_TYPES([DBusBasicValue],,,[[#include ]]) if test "x${enable_systemd}" != xno; then if test $HAVE_dbus = 0; then if test "x${enable_systemd}" = xyes; then AC_MSG_FAILURE([cannot enable systemd without DBus]) else enable_systemd=no fi fi if test "x${enable_systemd}" = xtry; then AC_MSG_CHECKING([for systemd version query result via dbus-send]) ret=$({ dbus-send --system --print-reply \ --dest=org.freedesktop.systemd1 \ /org/freedesktop/systemd1 \ org.freedesktop.DBus.Properties.Get \ string:org.freedesktop.systemd1.Manager \ string:Version 2>/dev/null \ || echo "this borked"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) if test "x${ret}" != xborked \ || systemctl --version 2>/dev/null | grep -q systemd; then enable_systemd=yes else enable_systemd=no fi fi fi AC_MSG_CHECKING([whether to enable support for managing resources via systemd]) AC_MSG_RESULT([${enable_systemd}]) HAVE_systemd=0 if test "x${enable_systemd}" = xyes; then HAVE_systemd=1 PCMK_FEATURES="$PCMK_FEATURES systemd" AC_MSG_CHECKING([for systemd path for system unit files]) systemdunitdir="${systemdunitdir-}" PKG_CHECK_VAR([systemdunitdir], [systemd], [systemdsystemunitdir], [], [systemdunitdir=no]) AC_MSG_RESULT([${systemdunitdir}]) if test "x${systemdunitdir}" = xno; then AC_MSG_FAILURE([cannot enable systemd when systemdunitdir unresolved]) fi fi AC_SUBST(systemdunitdir) AC_DEFINE_UNQUOTED(SUPPORT_SYSTEMD, $HAVE_systemd, Support systemd based system services) AM_CONDITIONAL(BUILD_SYSTEMD, test $HAVE_systemd = 1) AC_SUBST(SUPPORT_SYSTEMD) if test "x${enable_upstart}" != xno; then if test $HAVE_dbus = 0; then if test "x${enable_upstart}" = xyes; then AC_MSG_FAILURE([cannot enable Upstart without DBus]) else enable_upstart=no fi fi if test "x${enable_upstart}" = xtry; then AC_MSG_CHECKING([for Upstart version query result via dbus-send]) ret=$({ dbus-send --system --print-reply --dest=com.ubuntu.Upstart \ /com/ubuntu/Upstart org.freedesktop.DBus.Properties.Get \ string:com.ubuntu.Upstart0_6 string:version 2>/dev/null \ || echo "this borked"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) if test "x${ret}" != xborked \ || initctl --version 2>/dev/null | grep -q upstart; then enable_upstart=yes else enable_upstart=no fi fi fi AC_MSG_CHECKING([whether to enable support for managing resources via Upstart]) AC_MSG_RESULT([${enable_upstart}]) HAVE_upstart=0 if test "x${enable_upstart}" = xyes; then HAVE_upstart=1 PCMK_FEATURES="$PCMK_FEATURES upstart" fi AC_DEFINE_UNQUOTED(SUPPORT_UPSTART, $HAVE_upstart, Support upstart based system services) AM_CONDITIONAL(BUILD_UPSTART, test $HAVE_upstart = 1) AC_SUBST(SUPPORT_UPSTART) case $SUPPORT_NAGIOS in 1|yes|true|try) SUPPORT_NAGIOS=1 ;; *) SUPPORT_NAGIOS=0 ;; esac if test $SUPPORT_NAGIOS = 1; then PCMK_FEATURES="$PCMK_FEATURES nagios" fi AC_DEFINE_UNQUOTED(SUPPORT_NAGIOS, $SUPPORT_NAGIOS, Support nagios plugins) AM_CONDITIONAL(BUILD_NAGIOS, test $SUPPORT_NAGIOS = 1) if test x"$NAGIOS_PLUGIN_DIR" = x""; then NAGIOS_PLUGIN_DIR="${libexecdir}/nagios/plugins" fi AC_DEFINE_UNQUOTED(NAGIOS_PLUGIN_DIR, "$NAGIOS_PLUGIN_DIR", Directory for nagios plugins) AC_SUBST(NAGIOS_PLUGIN_DIR) if test x"$NAGIOS_METADATA_DIR" = x""; then NAGIOS_METADATA_DIR="${datadir}/nagios/plugins-metadata" fi AC_DEFINE_UNQUOTED(NAGIOS_METADATA_DIR, "$NAGIOS_METADATA_DIR", Directory for nagios plugins metadata) AC_SUBST(NAGIOS_METADATA_DIR) STACKS="" CLUSTERLIBS="" dnl ======================================================================== dnl Cluster stack - Corosync dnl ======================================================================== dnl Normalize the values case $SUPPORT_CS in 1|yes|true) SUPPORT_CS=yes missingisfatal=1 ;; try) missingisfatal=0 ;; *) SUPPORT_CS=no ;; esac AC_MSG_CHECKING(for native corosync) COROSYNC_LIBS="" if test $SUPPORT_CS = no; then AC_MSG_RESULT(no (disabled)) SUPPORT_CS=0 else AC_MSG_RESULT($SUPPORT_CS) SUPPORT_CS=1 PKG_CHECK_MODULES(cpg, libcpg) dnl Fatal PKG_CHECK_MODULES(cfg, libcfg) dnl Fatal PKG_CHECK_MODULES(cmap, libcmap) dnl Fatal PKG_CHECK_MODULES(quorum, libquorum) dnl Fatal PKG_CHECK_MODULES(libcorosync_common, libcorosync_common) dnl Fatal CFLAGS="$CFLAGS $libqb_FLAGS $cpg_FLAGS $cfg_FLAGS $cmap_CFLAGS $quorum_CFLAGS $libcorosync_common_CFLAGS" COROSYNC_LIBS="$COROSYNC_LIBS $libqb_LIBS $cpg_LIBS $cfg_LIBS $cmap_LIBS $quorum_LIBS $libcorosync_common_LIBS" CLUSTERLIBS="$CLUSTERLIBS $COROSYNC_LIBS" STACKS="$STACKS corosync-native" fi AC_DEFINE_UNQUOTED(SUPPORT_COROSYNC, $SUPPORT_CS, Support the Corosync messaging and membership layer) AM_CONDITIONAL(BUILD_CS_SUPPORT, test $SUPPORT_CS = 1) AC_SUBST(SUPPORT_COROSYNC) dnl dnl Cluster stack - Sanity dnl if test x${enable_no_stack} = xyes; then AC_MSG_NOTICE(No cluster stack supported, building only the scheduler) PCMK_FEATURES="$PCMK_FEATURES no-cluster-stack" else AC_MSG_CHECKING(for supported stacks) if test x"$STACKS" = x; then AC_MSG_FAILURE(You must support at least one cluster stack) fi AC_MSG_RESULT($STACKS) PCMK_FEATURES="$PCMK_FEATURES $STACKS" fi PCMK_FEATURES="$PCMK_FEATURES atomic-attrd" AC_SUBST(CLUSTERLIBS) dnl ======================================================================== dnl ACL dnl ======================================================================== case $SUPPORT_ACL in 1|yes|true) missingisfatal=1 ;; try) missingisfatal=0 ;; *) SUPPORT_ACL=no ;; esac AC_MSG_CHECKING(for acl support) if test $SUPPORT_ACL = no; then AC_MSG_RESULT(no (disabled)) SUPPORT_ACL=0 else AC_MSG_RESULT($SUPPORT_ACL) SUPPORT_ACL=1 AC_CHECK_LIB(qb, qb_ipcs_connection_auth_set) if test $ac_cv_lib_qb_qb_ipcs_connection_auth_set != yes; then SUPPORT_ACL=0 fi if test $SUPPORT_ACL = 0; then if test $missingisfatal = 0; then AC_MSG_WARN(Unable to support ACL. You need to use libqb > 0.13.0) else AC_MSG_FAILURE(Unable to support ACL. You need to use libqb > 0.13.0) fi fi fi if test $SUPPORT_ACL = 1; then PCMK_FEATURES="$PCMK_FEATURES acls" fi AM_CONDITIONAL(ENABLE_ACL, test "$SUPPORT_ACL" = "1") AC_DEFINE_UNQUOTED(ENABLE_ACL, $SUPPORT_ACL, Build in support for CIB ACL) dnl ======================================================================== dnl CIB secrets dnl ======================================================================== case $SUPPORT_CIBSECRETS in 1|yes|true|try) SUPPORT_CIBSECRETS=1 ;; *) SUPPORT_CIBSECRETS=0 ;; esac AC_DEFINE_UNQUOTED(SUPPORT_CIBSECRETS, $SUPPORT_CIBSECRETS, Support CIB secrets) AM_CONDITIONAL(BUILD_CIBSECRETS, test $SUPPORT_CIBSECRETS = 1) if test $SUPPORT_CIBSECRETS = 1; then PCMK_FEATURES="$PCMK_FEATURES cibsecrets" LRM_CIBSECRETS_DIR="${localstatedir}/lib/pacemaker/lrm/secrets" AC_DEFINE_UNQUOTED(LRM_CIBSECRETS_DIR,"$LRM_CIBSECRETS_DIR", Location for CIB secrets) AC_SUBST(LRM_CIBSECRETS_DIR) fi dnl ======================================================================== dnl GnuTLS dnl ======================================================================== dnl gnutls_priority_set_direct available since 2.1.7 (released 2007-11-29) AC_CHECK_LIB(gnutls, gnutls_priority_set_direct) if test "$ac_cv_lib_gnutls_gnutls_priority_set_direct" != ""; then AC_CHECK_HEADERS(gnutls/gnutls.h) fi dnl ======================================================================== dnl PAM dnl ======================================================================== AC_CHECK_HEADERS(security/pam_appl.h pam/pam_appl.h) dnl ======================================================================== dnl System Health dnl ======================================================================== dnl Check if servicelog development package is installed SERVICELOG=servicelog-1 SERVICELOG_EXISTS="no" AC_MSG_CHECKING(for $SERVICELOG packages) if $PKG_CONFIG --exists $SERVICELOG then PKG_CHECK_MODULES([SERVICELOG], [servicelog-1]) SERVICELOG_EXISTS="yes" fi AC_MSG_RESULT($SERVICELOG_EXISTS) AM_CONDITIONAL(BUILD_SERVICELOG, test "$SERVICELOG_EXISTS" = "yes") dnl Check if OpenIMPI packages and servicelog are installed OPENIPMI="OpenIPMI OpenIPMIposix" OPENIPMI_SERVICELOG_EXISTS="no" AC_MSG_CHECKING(for $SERVICELOG $OPENIPMI packages) if $PKG_CONFIG --exists $OPENIPMI $SERVICELOG then PKG_CHECK_MODULES([OPENIPMI_SERVICELOG],[OpenIPMI OpenIPMIposix]) OPENIPMI_SERVICELOG_EXISTS="yes" fi AC_MSG_RESULT($OPENIPMI_SERVICELOG_EXISTS) AM_CONDITIONAL(BUILD_OPENIPMI_SERVICELOG, test "$OPENIPMI_SERVICELOG_EXISTS" = "yes") dnl ======================================================================== dnl Compiler flags dnl ======================================================================== dnl Make sure that CFLAGS is not exported. If the user did dnl not have CFLAGS in their environment then this should have dnl no effect. However if CFLAGS was exported from the user's dnl environment, then the new CFLAGS will also be exported dnl to sub processes. if export | fgrep " CFLAGS=" > /dev/null; then SAVED_CFLAGS="$CFLAGS" unset CFLAGS CFLAGS="$SAVED_CFLAGS" unset SAVED_CFLAGS fi AC_ARG_VAR([CFLAGS_HARDENED_LIB], [extra C compiler flags for hardened libraries]) AC_ARG_VAR([LDFLAGS_HARDENED_LIB], [extra linker flags for hardened libraries]) AC_ARG_VAR([CFLAGS_HARDENED_EXE], [extra C compiler flags for hardened executables]) AC_ARG_VAR([LDFLAGS_HARDENED_EXE], [extra linker flags for hardened executables]) CC_EXTRAS="" if test "$GCC" != yes; then CFLAGS="$CFLAGS -g" else CFLAGS="$CFLAGS -ggdb" dnl When we don't have diagnostic push / pull, we can't explicitly disable dnl checking for nonliteral formats in the places where they occur on purpose dnl thus we disable nonliteral format checking globally as we are aborting dnl on warnings. dnl what makes the things really ugly is that nonliteral format checking is dnl obviously available as an extra switch in very modern gcc but for older dnl gcc this is part of -Wformat=2 dnl so if we have push/pull we can enable -Wformat=2 -Wformat-nonliteral dnl if we don't have push/pull but -Wformat-nonliteral we can enable -Wformat=2 dnl otherwise none of both gcc_diagnostic_push_pull=no cc_temp_flags "$CFLAGS $WERROR" AC_MSG_CHECKING([for gcc diagnostic push / pull]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #pragma GCC diagnostic push #pragma GCC diagnostic pop ]])], [ AC_MSG_RESULT([yes]) gcc_diagnostic_push_pull=yes ], AC_MSG_RESULT([no])) cc_restore_flags if cc_supports_flag "-Wformat-nonliteral"; then gcc_format_nonliteral=yes else gcc_format_nonliteral=no fi # We had to eliminate -Wnested-externs because of libtool changes # Make sure to order options so that the former stand for prerequisites # of the latter (e.g., -Wformat-nonliteral requires -Wformat). EXTRA_FLAGS="-fgnu89-inline -Wall -Waggregate-return -Wbad-function-cast -Wcast-align -Wdeclaration-after-statement -Wendif-labels -Wfloat-equal -Wformat-security -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wno-long-long -Wno-strict-aliasing -Wpointer-arith -Wstrict-prototypes -Wwrite-strings -Wunused-but-set-variable -Wunsigned-char" if test "x$gcc_diagnostic_push_pull" = "xyes"; then AC_DEFINE([GCC_FORMAT_NONLITERAL_CHECKING_ENABLED], [], [gcc can complain about nonliterals in format]) EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2 -Wformat-nonliteral" else if test "x$gcc_format_nonliteral" = "xyes"; then EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2" fi fi # Additional warnings it might be nice to enable one day # -Wshadow # -Wunreachable-code for j in $EXTRA_FLAGS do if cc_supports_flag $CC_EXTRAS $j then CC_EXTRAS="$CC_EXTRAS $j" fi done if test "x${enable_ansi}" = xyes && cc_supports_flag -std=iso9899:199409 ; then AC_MSG_NOTICE(Enabling ANSI Compatibility) CC_EXTRAS="$CC_EXTRAS -ansi -D_GNU_SOURCE -DANSI_ONLY" fi AC_MSG_NOTICE(Activated additional gcc flags: ${CC_EXTRAS}) fi dnl dnl Hardening flags dnl dnl The prime control of whether to apply (targeted) hardening build flags and dnl which ones is --{enable,disable}-hardening option passed to ./configure: dnl dnl --enable-hardening=try (default): dnl depending on whether any of CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE, dnl CFLAGS_HARDENED_LIB or LDFLAGS_HARDENED_LIB environment variables dnl (see below) is set and non-null, all these custom flags (even if not dnl set) are used as are, otherwise the best effort is made to offer dnl reasonably strong hardening in several categories (RELRO, PIE, dnl "bind now", stack protector) according to what the selected toolchain dnl can offer dnl dnl --enable-hardening: dnl same effect as --enable-hardening=try when the environment variables dnl in question are suppressed dnl dnl --disable-hardening: dnl do not apply any targeted hardening measures at all dnl dnl The user-injected environment variables that regulate the hardening in dnl default case are as follows: dnl dnl * CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE dnl compiler and linker flags (respectively) for daemon programs dnl (pacemakerd, pacemaker-attrd, pacemaker-controld, pacemaker-execd, dnl cib, stonithd, pacemaker-remoted, pacemaker-schedulerd) dnl dnl * CFLAGS_HARDENED_LIB, LDFLAGS_HARDENED_LIB dnl compiler and linker flags (respectively) for libraries linked dnl with the daemon programs dnl dnl Note that these are purposedly targeted variables (addressing particular dnl targets all over the scattered Makefiles) and have no effect outside of dnl the predestined scope (e.g., CLI utilities). For a global reach, dnl use CFLAGS, LDFLAGS, etc. as usual. dnl dnl For guidance on the suitable flags consult, for instance: dnl https://fedoraproject.org/wiki/Changes/Harden_All_Packages#Detailed_Harden_Flags_Description dnl https://owasp.org/index.php/C-Based_Toolchain_Hardening#GCC.2FBinutils dnl if test "x${HARDENING}" != "xtry"; then unset CFLAGS_HARDENED_EXE unset CFLAGS_HARDENED_LIB unset LDFLAGS_HARDENED_EXE unset LDFLAGS_HARDENED_LIB fi if test "x${HARDENING}" = "xno"; then AC_MSG_NOTICE([Hardening: explicitly disabled]) elif test "x${HARDENING}" = "xyes" \ || test "$(env | grep -Ec '^(C|LD)FLAGS_HARDENED_(EXE|LIB)=.')" = 0; then dnl We'll figure out on our own... CFLAGS_HARDENED_EXE= CFLAGS_HARDENED_LIB= LDFLAGS_HARDENED_EXE= LDFLAGS_HARDENED_LIB= relro=0 pie=0 bindnow=0 # daemons incl. libs: partial RELRO flag="-Wl,-z,relro" CC_CHECK_LDFLAGS(["${flag}"], [LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}"; relro=1]) # daemons: PIE for both CFLAGS and LDFLAGS if cc_supports_flag -fPIE; then flag="-pie" CC_CHECK_LDFLAGS(["${flag}"], [CFLAGS_HARDENED_EXE="${CFLAGS_HARDENED_EXE} -fPIE"; LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; pie=1]) fi # daemons incl. libs: full RELRO if sensible + as-needed linking # so as to possibly mitigate startup performance # hit caused by excessive linking with unneeded # libraries if test "${relro}" = 1 && test "${pie}" = 1; then flag="-Wl,-z,now" CC_CHECK_LDFLAGS(["${flag}"], [LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}"; bindnow=1]) fi if test "${bindnow}" = 1; then flag="-Wl,--as-needed" CC_CHECK_LDFLAGS(["${flag}"], [LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}"; LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}"]) fi # universal: prefer strong > all > default stack protector if possible flag= if cc_supports_flag -fstack-protector-strong; then flag="-fstack-protector-strong" elif cc_supports_flag -fstack-protector-all; then flag="-fstack-protector-all" elif cc_supports_flag -fstack-protector; then flag="-fstack-protector" fi if test -n "${flag}"; then CC_EXTRAS="${CC_EXTRAS} ${flag}" stackprot=1 fi if test "${relro}" = 1 \ || test "${pie}" = 1 \ || test "${stackprot}" = 1; then AC_MSG_NOTICE([Hardening: relro=${relro} pie=${pie} bindnow=${bindnow} stackprot=${flag}]) else AC_MSG_WARN([Hardening: no suitable features in the toolchain detected]) fi else AC_MSG_NOTICE([Hardening: using custom flags]) fi CFLAGS="$CFLAGS $CC_EXTRAS" NON_FATAL_CFLAGS="$CFLAGS" AC_SUBST(NON_FATAL_CFLAGS) dnl dnl We reset CFLAGS to include our warnings *after* all function dnl checking goes on, so that our warning flags don't keep the dnl AC_*FUNCS() calls above from working. In particular, -Werror will dnl *always* cause us troubles if we set it before here. dnl dnl if test "x${enable_fatal_warnings}" = xyes ; then AC_MSG_NOTICE(Enabling Fatal Warnings) CFLAGS="$CFLAGS $WERROR" fi AC_SUBST(CFLAGS) dnl This is useful for use in Makefiles that need to remove one specific flag CFLAGS_COPY="$CFLAGS" AC_SUBST(CFLAGS_COPY) AC_SUBST(LIBADD_DL) dnl extra flags for dynamic linking libraries AC_SUBST(LIBADD_INTL) dnl extra flags for GNU gettext stuff... AC_SUBST(LOCALE) dnl Options for cleaning up the compiler output QUIET_LIBTOOL_OPTS="" QUIET_MAKE_OPTS="" if test "x${enable_quiet}" = "xyes"; then QUIET_LIBTOOL_OPTS="--quiet" QUIET_MAKE_OPTS="--quiet" fi AC_MSG_RESULT(Supress make details: ${enable_quiet}) dnl Put the above variables to use LIBTOOL="${LIBTOOL} --tag=CC \$(QUIET_LIBTOOL_OPTS)" MAKE="${MAKE} \$(QUIET_MAKE_OPTS)" AC_SUBST(CC) AC_SUBST(MAKE) AC_SUBST(LIBTOOL) AC_SUBST(QUIET_MAKE_OPTS) AC_SUBST(QUIET_LIBTOOL_OPTS) AC_DEFINE_UNQUOTED(CRM_FEATURES, "$PCMK_FEATURES", Set of enabled features) AC_SUBST(PCMK_FEATURES) dnl Files we output that need to be executable AC_CONFIG_FILES([cts/CTSlab.py], [chmod +x cts/CTSlab.py]) AC_CONFIG_FILES([cts/LSBDummy], [chmod +x cts/LSBDummy]) AC_CONFIG_FILES([cts/OCFIPraTest.py], [chmod +x cts/OCFIPraTest.py]) AC_CONFIG_FILES([cts/cluster_test], [chmod +x cts/cluster_test]) AC_CONFIG_FILES([cts/cts], [chmod +x cts/cts]) AC_CONFIG_FILES([cts/cts-cli], [chmod +x cts/cts-cli]) AC_CONFIG_FILES([cts/cts-coverage], [chmod +x cts/cts-coverage]) AC_CONFIG_FILES([cts/cts-exec], [chmod +x cts/cts-exec]) AC_CONFIG_FILES([cts/cts-fencing], [chmod +x cts/cts-fencing]) AC_CONFIG_FILES([cts/cts-log-watcher], [chmod +x cts/cts-log-watcher]) AC_CONFIG_FILES([cts/cts-regression], [chmod +x cts/cts-regression]) AC_CONFIG_FILES([cts/cts-scheduler], [chmod +x cts/cts-scheduler]) AC_CONFIG_FILES([cts/cts-support], [chmod +x cts/cts-support]) AC_CONFIG_FILES([cts/lxc_autogen.sh], [chmod +x cts/lxc_autogen.sh]) AC_CONFIG_FILES([cts/benchmark/clubench], [chmod +x cts/benchmark/clubench]) AC_CONFIG_FILES([cts/fence_dummy], [chmod +x cts/fence_dummy]) AC_CONFIG_FILES([cts/pacemaker-cts-dummyd], [chmod +x cts/pacemaker-cts-dummyd]) AC_CONFIG_FILES([daemons/fenced/fence_legacy], [chmod +x daemons/fenced/fence_legacy]) +AC_CONFIG_FILES([extra/resources/ClusterMon], [chmod +x extra/resources/ClusterMon]) +AC_CONFIG_FILES([extra/resources/HealthSMART], [chmod +x extra/resources/HealthSMART]) +AC_CONFIG_FILES([extra/resources/SysInfo], [chmod +x extra/resources/SysInfo]) +AC_CONFIG_FILES([extra/resources/ifspeed], [chmod +x extra/resources/ifspeed]) +AC_CONFIG_FILES([extra/resources/o2cb], [chmod +x extra/resources/o2cb]) AC_CONFIG_FILES([tools/crm_failcount], [chmod +x tools/crm_failcount]) AC_CONFIG_FILES([tools/crm_master], [chmod +x tools/crm_master]) AC_CONFIG_FILES([tools/crm_report], [chmod +x tools/crm_report]) AC_CONFIG_FILES([tools/crm_standby], [chmod +x tools/crm_standby]) AC_CONFIG_FILES([tools/cibsecret], [chmod +x tools/cibsecret]) dnl Other files we output AC_CONFIG_FILES(Makefile \ Doxyfile \ cts/Makefile \ cts/CTS.py \ cts/CTSvars.py \ cts/benchmark/Makefile \ cts/pacemaker-cts-dummyd@.service \ daemons/Makefile \ daemons/attrd/Makefile \ daemons/based/Makefile \ daemons/controld/Makefile \ daemons/execd/Makefile \ daemons/execd/pacemaker_remote \ daemons/execd/pacemaker_remote.service \ daemons/fenced/Makefile \ daemons/pacemakerd/Makefile \ daemons/pacemakerd/pacemaker \ daemons/pacemakerd/pacemaker.service \ daemons/pacemakerd/pacemaker.upstart \ daemons/pacemakerd/pacemaker.combined.upstart \ daemons/schedulerd/Makefile \ doc/Makefile \ doc/Clusters_from_Scratch/publican.cfg \ doc/Pacemaker_Administration/publican.cfg \ doc/Pacemaker_Development/publican.cfg \ doc/Pacemaker_Explained/publican.cfg \ doc/Pacemaker_Remote/publican.cfg \ extra/Makefile \ extra/alerts/Makefile \ extra/resources/Makefile \ extra/logrotate/Makefile \ extra/logrotate/pacemaker \ include/Makefile \ include/crm/Makefile \ include/crm/cib/Makefile \ include/crm/common/Makefile \ include/crm/cluster/Makefile \ include/crm/fencing/Makefile \ include/crm/pengine/Makefile \ replace/Makefile \ lib/Makefile \ lib/pacemaker.pc \ lib/pacemaker-cib.pc \ lib/pacemaker-lrmd.pc \ lib/pacemaker-service.pc \ lib/pacemaker-pengine.pc \ lib/pacemaker-fencing.pc \ lib/pacemaker-cluster.pc \ lib/common/Makefile \ lib/cluster/Makefile \ lib/cib/Makefile \ lib/gnu/Makefile \ lib/pengine/Makefile \ lib/transition/Makefile \ lib/fencing/Makefile \ lib/lrmd/Makefile \ lib/services/Makefile \ tools/Makefile \ tools/report.collector \ tools/report.common \ tools/crm_mon.service \ tools/crm_mon.upstart \ xml/Makefile \ ) dnl Now process the entire list of files added by previous dnl calls to AC_CONFIG_FILES() AC_OUTPUT() dnl ***************** dnl Configure summary dnl ***************** AC_MSG_RESULT([]) AC_MSG_RESULT([$PACKAGE configuration:]) AC_MSG_RESULT([ Version = ${VERSION} (Build: $BUILD_VERSION)]) AC_MSG_RESULT([ Features =${PCMK_FEATURES}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ Prefix = ${prefix}]) AC_MSG_RESULT([ Executables = ${sbindir}]) AC_MSG_RESULT([ Man pages = ${mandir}]) AC_MSG_RESULT([ Libraries = ${libdir}]) AC_MSG_RESULT([ Header files = ${includedir}]) AC_MSG_RESULT([ Arch-independent files = ${datadir}]) AC_MSG_RESULT([ State information = ${localstatedir}]) AC_MSG_RESULT([ System configuration = ${sysconfdir}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ HA group name = ${CRM_DAEMON_GROUP}]) AC_MSG_RESULT([ HA user name = ${CRM_DAEMON_USER}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ CFLAGS = ${CFLAGS}]) AC_MSG_RESULT([ CFLAGS_HARDENED_EXE = ${CFLAGS_HARDENED_EXE}]) AC_MSG_RESULT([ CFLAGS_HARDENED_LIB = ${CFLAGS_HARDENED_LIB}]) AC_MSG_RESULT([ LDFLAGS_HARDENED_EXE = ${LDFLAGS_HARDENED_EXE}]) AC_MSG_RESULT([ LDFLAGS_HARDENED_LIB = ${LDFLAGS_HARDENED_LIB}]) AC_MSG_RESULT([ Libraries = ${LIBS}]) AC_MSG_RESULT([ Stack Libraries = ${CLUSTERLIBS}]) diff --git a/extra/resources/ClusterMon b/extra/resources/ClusterMon.in similarity index 99% rename from extra/resources/ClusterMon rename to extra/resources/ClusterMon.in index 0604a26b5f..04fb43f1e6 100755 --- a/extra/resources/ClusterMon +++ b/extra/resources/ClusterMon.in @@ -1,276 +1,276 @@ -#!/bin/bash +#!@BASH_PATH@ # # # ClusterMon OCF RA. # Starts crm_mon in background which logs cluster status as # html to the specified file. # # Copyright (c) 2004 SUSE LINUX AG, Lars Marowsky-Brée # All Rights Reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # # OCF instance parameters: # OCF_RESKEY_user # OCF_RESKEY_pidfile # OCF_RESKEY_update # OCF_RESKEY_extra_options # OCF_RESKEY_htmlfile ####################################################################### # Initialization: : ${OCF_FUNCTIONS=${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs} . ${OCF_FUNCTIONS} : ${__OCF_ACTION=$1} ####################################################################### meta_data() { cat < 1.0 This is a ClusterMon Resource Agent. It outputs current cluster status to the html. Runs crm_mon in the background, recording the cluster status to an HTML file The user we want to run crm_mon as The user we want to run crm_mon as How frequently should we update the cluster status (in milliseconds). For compatibility with old documentation, values less than 1000 will be treated as seconds. Update interval in milliseconds Additional options to pass to crm_mon. Eg. -n -r Extra options PID file location to ensure only one instance is running PID file Location to write HTML output to. HTML output END } ####################################################################### ClusterMon_usage() { cat </dev/null | \ grep -qE "[c]rm_mon.*${OCF_RESKEY_pidfile}" rc=$? case $rc in 0) exit $OCF_SUCCESS;; 1) exit $OCF_NOT_RUNNING;; *) exit $OCF_ERR_GENERIC;; esac fi fi exit $OCF_NOT_RUNNING } CheckOptions() { while getopts Vi:nrh:cdp: OPTION do case $OPTION in V|n|r|c|d);; i) ocf_log warn "You should not have specified the -i option, since OCF_RESKEY_update is set already!";; h) ocf_log warn "You should not have specified the -h option, since OCF_RESKEY_htmlfile is set already!";; p) ocf_log warn "You should not have specified the -p option, since OCF_RESKEY_pidfile is set already!";; *) return $OCF_ERR_ARGS;; esac done if [ $? -ne 0 ]; then return $OCF_ERR_ARGS fi # We should have eaten all options at this stage shift $(($OPTIND -1)) if [ $# -gt 0 ]; then false else true fi } ClusterMon_validate() { # Existence of the user if [ ! -z $OCF_RESKEY_user ]; then getent passwd "$OCF_RESKEY_user" >/dev/null if [ $? -eq 0 ]; then : Yes, user exists. We can further check his permission on crm_mon if necessary else ocf_log err "The user $OCF_RESKEY_user does not exist!" exit $OCF_ERR_ARGS fi fi # Pidfile better be an absolute path case $OCF_RESKEY_pidfile in /*) ;; *) ocf_log warn "You should have pidfile($OCF_RESKEY_pidfile) of absolute path!" ;; esac # Check the update interval if ocf_is_decimal "$OCF_RESKEY_update" && [ $OCF_RESKEY_update -gt 0 ]; then : else ocf_log err "Invalid update interval $OCF_RESKEY_update. It should be positive integer!" exit $OCF_ERR_ARGS fi if CheckOptions $OCF_RESKEY_extra_options; then : else ocf_log err "Invalid options $OCF_RESKEY_extra_options!" exit $OCF_ERR_ARGS fi # Htmlfile better be an absolute path case $OCF_RESKEY_htmlfile in /*) ;; *) ocf_log warn "You should have htmlfile($OCF_RESKEY_htmlfile) of absolute path!" ;; esac echo "Validate OK" return $OCF_SUCCESS } if [ $# -ne 1 ]; then ClusterMon_usage exit $OCF_ERR_ARGS fi : ${OCF_RESKEY_update:="15000"} : ${OCF_RESKEY_pidfile:="/tmp/ClusterMon_${OCF_RESOURCE_INSTANCE}.pid"} : ${OCF_RESKEY_htmlfile:="/tmp/ClusterMon_${OCF_RESOURCE_INSTANCE}.html"} if [ ${OCF_RESKEY_update} -ge 1000 ]; then OCF_RESKEY_update=$(( $OCF_RESKEY_update / 1000 )) fi CMON_CMD="${HA_SBIN_DIR}/crm_mon -p $OCF_RESKEY_pidfile -d -i $OCF_RESKEY_update $OCF_RESKEY_extra_options -h $OCF_RESKEY_htmlfile" case $__OCF_ACTION in meta-data) meta_data exit $OCF_SUCCESS ;; start) ClusterMon_start ;; stop) ClusterMon_stop ;; monitor) ClusterMon_monitor ;; validate-all) ClusterMon_validate ;; usage|help) ClusterMon_usage exit $OCF_SUCCESS ;; *) ClusterMon_usage exit $OCF_ERR_UNIMPLEMENTED ;; esac exit $? diff --git a/extra/resources/HealthSMART b/extra/resources/HealthSMART.in similarity index 99% rename from extra/resources/HealthSMART rename to extra/resources/HealthSMART.in index 3db92adcac..9e91298a9e 100755 --- a/extra/resources/HealthSMART +++ b/extra/resources/HealthSMART.in @@ -1,328 +1,328 @@ -#!/bin/bash +#!@BASH_PATH@ # # # HealthSMART OCF RA. Checks the S.M.A.R.T. status of all given # drives and writes the #health-smart status into the CIB # # Copyright (c) 2009 Michael Schwartzkopff, 2010 Matthew Richardson # # All Rights Reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # ####################################################################### ####################################################################### # Initialization: : ${OCF_FUNCTIONS=${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs} . ${OCF_FUNCTIONS} : ${__OCF_ACTION=$1} # SMARTCTL=/usr/sbin/smartctl ATTRDUP=/usr/sbin/attrd_updater ####################################################################### meta_data() { cat < 1.0 Systhem health agent that checks the S.M.A.R.T. status of the given drives and updates the #health-smart attribute. SMART health status Location to store the resource state in. State file The drive(s) to check as a SPACE separated list. Enter the full path to the device, e.g. "/dev/sda". Drives to check The device type(s) to assume for the drive(s) being tested as a SPACE separated list. Device types Lower limit of the temperature in deg C of the drive(s). Below this limit the status will be red. Lower limit for the red smart attribute Upper limit of the temperature if deg C of the drives(s). If the drive reports a temperature higher than this value the status of #health-smart will be red. Upper limit for red smart attribute Number of deg C below/above the upper/lower temp limits at which point the status of #health-smart will change to yellow. Deg C below/above the upper limits for yellow smart attribute END } ####################################################################### check_temperature() { if [ $1 -lt ${lower_red_limit} ] ; then ocf_log info "Drive ${DRIVE} ${DEVICE} too cold: ${1} C" $ATTRDUP -n "#health-smart" -U "red" -d "5s" return 1 fi if [ $1 -gt ${upper_red_limit} ] ; then ocf_log info "Drive ${DRIVE} ${DEVICE} too hot: ${1} C" $ATTRDUP -n "#health-smart" -U "red" -d "5s" return 1 fi if [ $1 -lt ${lower_yellow_limit} ] ; then ocf_log info "Drive ${DRIVE} ${DEVICE} quite cold: ${1} C" $ATTRDUP -n "#health-smart" -U "yellow" -d "5s" return 1 fi if [ $1 -gt ${upper_yellow_limit} ] ; then ocf_log info "Drive ${DRIVE} ${DEVICE} quite hot: ${1} C" $ATTRDUP -n "#health-smart" -U "yellow" -d "5s" return 1 fi } init_smart() { #Set temperature defaults if [ -z ${OCF_RESKEY_temp_warning} ]; then yellow_threshold=5 else yellow_threshold=${OCF_RESKEY_temp_warning} fi if [ -z ${OCF_RESKEY_temp_lower_limit} ] ; then lower_red_limit=0 else lower_red_limit=${OCF_RESKEY_temp_lower_limit} fi lower_yellow_limit=$((${lower_red_limit}+${yellow_threshold})) if [ -z ${OCF_RESKEY_temp_upper_limit} ] ; then upper_red_limit=60 else upper_red_limit=${OCF_RESKEY_temp_upper_limit} fi upper_yellow_limit=$((${upper_red_limit}-${yellow_threshold})) #Set disk defaults if [ -z "${OCF_RESKEY_drives}" ] ; then DRIVES="/dev/sda" else DRIVES=${OCF_RESKEY_drives} fi #Test for presence of smartctl if [ ! -x $SMARTCTL ] ; then ocf_log err "${SMARTCTL} not installed." exit $OCF_ERR_INSTALLED fi for DRIVE in $DRIVES; do if [ "${OCF_RESKEY_devices}" ]; then for DEVICE in ${OCF_RESKEY_devices}; do $SMARTCTL -d $DEVICE -i ${DRIVE} | grep -q "SMART support is: Enabled" if [ $? -ne "0" ] ; then ocf_log err "S.M.A.R.T. not enabled for drive "${DRIVE} exit $OCF_ERR_INSTALLED fi done else $SMARTCTL -i ${DRIVE} | grep -q "SMART support is: Enabled" if [ $? -ne "0" ] ; then ocf_log err "S.M.A.R.T. not enabled for drive "${DRIVE} exit $OCF_ERR_INSTALLED fi fi done } HealthSMART_usage() { cat < 1.0 This is a SysInfo Resource Agent. It records (in the CIB) various attributes of a node Sample Linux output: arch: i686 os: Linux-2.4.26-gentoo-r14 free_swap: 1999 cpu_info: Intel(R) Celeron(R) CPU 2.40GHz cpu_speed: 4771.02 cpu_cores: 1 cpu_load: 0.00 ram_total: 513 ram_free: 117 root_free: 2.4 #health_disk: red Sample Darwin output: arch: i386 os: Darwin-8.6.2 cpu_info: Intel Core Duo cpu_speed: 2.16 cpu_cores: 2 cpu_load: 0.18 ram_total: 2016 ram_free: 787 root_free: 13 #health_disk: green Units: free_swap: MB ram_*: MB cpu_speed (Linux): bogomips cpu_speed (Darwin): GHz *_free: GB (or user-defined: disk_unit) SysInfo resource agent PID file PID file Interval to allow values to stabilize Dampening Delay Filesystems or Paths to be queried for free disk space as a SPACE separated list - e.g "/dev/sda1 /tmp". Results will be written to an attribute with leading slashes removed, and other slashes replaced with underscore, and the word 'free' appended - e.g for /dev/sda1 it would be 'dev_sda1_free'. Note: The root filesystem '/' is always queried to an attribute named 'root_free' List of Filesytems/Paths to query for free disk space Unit to report disk free space in. Can be one of: B, K, M, G, T, P (case-insensitive) Unit to report disk free space in The amount of free space required in monitored disks. If any of the monitored disks has less than this amount of free space, , with the node attribute "#health_disk" changing to "red", all resources will move away from the node. Set the node-health-strategy property appropriately for this to take effect. If the unit is not specified, it defaults to disk_unit. minimum disk free space required END } ####################################################################### UpdateStat() { name=$1; shift value="$*" printf "%s:\t%s\n" "$name" "$value" if [ "$__OCF_ACTION" = "start" ] ; then ${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n $name -B "$value" else ${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n $name -v "$value" fi } SysInfoStats() { UpdateStat arch "`uname -m`" UpdateStat os "`uname -s`-`uname -r`" case `uname -s` in "Darwin") mem=`top -l 1 | grep Mem: | awk '{print $10}'` mem_used=`top -l 1 | grep Mem: | awk '{print $8}'` mem=`SysInfo_mem_units $mem` mem_used=`SysInfo_mem_units $mem_used` mem_total=`expr $mem_used + $mem` cpu_type=`system_profiler SPHardwareDataType | awk -F': ' '/^CPU Type/ {print $2; exit}'` cpu_speed=`system_profiler SPHardwareDataType | awk -F': ' '/^CPU Speed/ {print $2; exit}'` cpu_cores=`system_profiler SPHardwareDataType | awk -F': ' '/^Number Of/ {print $2; exit}'` cpu_load=`uptime | awk '{ print $10 }'` ;; "FreeBSD") cpu_type=`sysctl -in hw.model` cpu_speed=`sysctl -in dev.cpu.0.freq` cpu_cores=`sysctl -in hw.ncpu` cpu_load=`sysctl -in vm.loadavg | awk '{ print $4 }'` free_pages=`sysctl -in vm.stats.vm.v_free_count` page_count=`sysctl -in vm.stats.vm.v_page_count` page_size=`sysctl -in vm.stats.vm.v_page_size` mem=`expr $free_pages \* $page_size / 1024 / 1024`M mem_total=`expr $page_count \* $page_size / 1024 / 1024`M ;; "Linux") if [ -f /proc/cpuinfo ]; then cpu_type=`awk -F': ' '/model name/ {print $2; exit}' /proc/cpuinfo` cpu_speed=`awk -F': ' '/bogomips/ {print $2; exit}' /proc/cpuinfo` cpu_cores=`grep "^processor" /proc/cpuinfo | wc -l` fi cpu_load=`uptime | awk '{ print $10 }'` if [ -f /proc/meminfo ]; then # meminfo results are in kB mem=`grep "SwapFree" /proc/meminfo | awk '{print $2"k"}'` if [ ! -z $mem ]; then UpdateStat free_swap `SysInfo_mem_units $mem` fi mem=`grep "Inactive" /proc/meminfo | awk '{print $2"k"}'` mem_total=`grep "MemTotal" /proc/meminfo | awk '{print $2"k"}'` else mem=`top -n 1 | grep Mem: | awk '{print $7}'` fi ;; *) esac if [ x != x"$cpu_type" ]; then UpdateStat cpu_info "$cpu_type" fi if [ x != x"$cpu_speed" ]; then UpdateStat cpu_speed "$cpu_speed" fi if [ x != x"$cpu_cores" ]; then UpdateStat cpu_cores "$cpu_cores" fi if [ x != x"$cpu_load" ]; then UpdateStat cpu_load "$cpu_load" fi if [ ! -z "$mem" ]; then # Massage the memory values UpdateStat ram_total `SysInfo_mem_units $mem_total` UpdateStat ram_free `SysInfo_mem_units $mem` fi # Portability notes: # o tail: explicit "-n" not available in Solaris; instead simplify # 'tail -n ' to the equivalent 'tail -'. for disk in "/" ${OCF_RESKEY_disks}; do unset disk_free disk_label disk_free=`df -h ${disk} | tail -1 | awk '{print $4}'` if [ x != x"$disk_free" ]; then disk_label=`echo $disk | sed -e 's#^/$#root#;s#^/*##;s#/#_#g'` disk_free=`SysInfo_hdd_units $disk_free` UpdateStat ${disk_label}_free $disk_free if [ -n "$MIN_FREE" ]; then if [ $disk_free -le $MIN_FREE ]; then UpdateStat "#health_disk" "red" else UpdateStat "#health_disk" "green" fi fi fi done } SysInfo_megabytes() { # Size in megabytes echo $1 | awk '{ n = $0; sub(/[0-9]+(.[0-9]+)?/, ""); split(n, a, $0); n=a[1]; if ($0 == "G" || $0 == "") { n *= 1024 }; if (/^kB?/) { n /= 1024 }; printf "%d\n", n }' # Intentionally round to an integer } SysInfo_mem_units() { mem=$1 if [ -z $1 ]; then return fi mem=$(SysInfo_megabytes "$1") # Round to the next multiple of 50 r=$(($mem % 50)) if [ $r != 0 ]; then mem=$(($mem + 50 - $r)) fi echo $mem } SysInfo_hdd_units() { # Defauts to size in gigabytes case $OCF_RESKEY_disk_unit in [Pp]) echo $(($(SysInfo_megabytes "$1") / 1024 / 1024 / 1024));; [Tt]) echo $(($(SysInfo_megabytes "$1") / 1024 / 1024));; [Gg]) echo $(($(SysInfo_megabytes "$1") / 1024));; [Mm]) echo $(SysInfo_megabytes "$1");; [Kk]) echo $(($(SysInfo_megabytes "$1") * 1024));; [Bb]) echo $(($(SysInfo_megabytes "$1") * 1024 * 1024));; *) ocf_log err "Invalid value for disk_unit: $OCF_RESKEY_disk_unit" echo $(($(SysInfo_megabytes "$1") / 1024));; esac } SysInfo_usage() { cat < $OCF_RESKEY_pidfile SysInfoStats exit $OCF_SUCCESS } SysInfo_stop() { rm $OCF_RESKEY_pidfile exit $OCF_SUCCESS } SysInfo_monitor() { if [ -f $OCF_RESKEY_pidfile ]; then clone=`cat $OCF_RESKEY_pidfile` fi if [ x$clone = x ]; then rm $OCF_RESKEY_pidfile exit $OCF_NOT_RUNNING elif [ $clone = $OCF_RESKEY_clone ]; then SysInfoStats exit $OCF_SUCCESS elif [ x$OCF_RESKEY_CRM_meta_globally_unique = xtrue -o x$OCF_RESKEY_CRM_meta_globally_unique = xTrue -o x$OCF_RESKEY_CRM_meta_globally_unique = xyes -o x$OCF_RESKEY_CRM_meta_globally_unique = xYes ]; then SysInfoStats exit $OCF_SUCCESS fi exit $OCF_NOT_RUNNING } SysInfo_validate() { return $OCF_SUCCESS } if [ $# -ne 1 ]; then SysInfo_usage exit $OCF_ERR_ARGS fi : ${OCF_RESKEY_pidfile:="${HA_VARRUN%%/}/SysInfo-${OCF_RESOURCE_INSTANCE}"} : ${OCF_RESKEY_disk_unit:="G"} : ${OCF_RESKEY_clone:="0"} if [ x != x${OCF_RESKEY_delay} ]; then OCF_RESKEY_delay="-d ${OCF_RESKEY_delay}" else OCF_RESKEY_delay="-d 0" fi MIN_FREE="" if [ -n "$OCF_RESKEY_min_disk_free" ]; then ocf_is_decimal "$OCF_RESKEY_min_disk_free" && OCF_RESKEY_min_disk_free="$OCF_RESKEY_min_disk_free$OCF_RESKEY_disk_unit" MIN_FREE=`SysInfo_hdd_units $OCF_RESKEY_min_disk_free` fi case $__OCF_ACTION in meta-data) meta_data exit $OCF_SUCCESS ;; start) SysInfo_start ;; stop) SysInfo_stop ;; monitor) SysInfo_monitor ;; validate-all) SysInfo_validate ;; usage|help) SysInfo_usage exit $OCF_SUCCESS ;; *) SysInfo_usage exit $OCF_ERR_UNIMPLEMENTED ;; esac exit $? diff --git a/extra/resources/ifspeed b/extra/resources/ifspeed.in similarity index 99% rename from extra/resources/ifspeed rename to extra/resources/ifspeed.in index 12c6135e4d..d5eee6c5f8 100755 --- a/extra/resources/ifspeed +++ b/extra/resources/ifspeed.in @@ -1,541 +1,541 @@ -#!/bin/bash +#!@BASH_PATH@ # # OCF resource agent which monitors state of network interface and records it # as a node attribute in the CIB based on the sum of speeds of its active (up, # link detected, not blocked) underlying interfaces. # # Copyright (c) 2011 Vladislav Bogdanov # Partially based on 'ping' RA by Andrew Beekhof # # Change on 2017 by Tomer Azran : # Add "ip" parameter to detect network interface name by ip address: # http://lists.clusterlabs.org/pipermail/users/2017-August/006224.html # # OCF instance parameters: # OCF_RESKEY_name: name of attribute to set in CIB # OCF_RESKEY_ip ip address to check # OCF_RESKEY_iface: network interface to monitor # OCF_RESKEY_bridge_ports: if not null and OCF_RESKEY_iface is a bridge, list of # bridge ports to consider. # Default is all ports which have designated_bridge=root_id # OCF_RESKEY_weight_base: Relative weight of 1Gbps. This can be used to tune # value of resulting CIB attribute. # # Initialization: : ${OCF_FUNCTIONS=${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs} # If these aren't available, we can still show help, # which is all that is needed to build the man pages. [ -r "${OCF_FUNCTIONS}" ] && . "${OCF_FUNCTIONS}" [ -r "${OCF_FUNCTIONS_DIR}/findif.sh" ] && . "${OCF_FUNCTIONS_DIR}/findif.sh" : ${OCF_SUCCESS=0} : ${__OCF_ACTION=$1} FINDIF=findif # Defaults OCF_RESKEY_name_default="ifspeed" OCF_RESKEY_bridge_ports_default="detect" OCF_RESKEY_weight_base_default=1000 OCF_RESKEY_dampen_default=5 : ${OCF_RESKEY_name=${OCF_RESKEY_name_default}} : ${OCF_RESKEY_bridge_ports=${OCF_RESKEY_bridge_ports_default}} : ${OCF_RESKEY_weight_base=${OCF_RESKEY_weight_base_default}} : ${OCF_RESKEY_dampen=${OCF_RESKEY_dampen_default}} meta_data() { cat < 1.0 Every time the monitor action is run, this resource agent records (in the CIB) (relative) speed of network interface it monitors. This RA can monitor physical interfaces, bonds, bridges, vlans and (hopefully) any combination of them. Examples: *) Bridge on top of one 10Gbps interface (eth2) and 802.3ad bonding (bond0) built on two 1Gbps interfaces (eth0 and eth1). *) Active-backup bonding built on top of one physical interface and one vlan on another interface. For STP-enabled bridges this RA tries to some-how guess network topology and by default looks only on ports which are connected to upstream switch. This can be overridden by 'bridge_ports' parameter. Active interfaces in this case are those in "forwarding" state. For balancing bonds this RA summs speeds of underlying "up" slave interfaces (and applies coefficient 0.8 to result). For non-balancing bonds ('active-backup' and probably 'broadcast'), only the speed of the currently active slave is used. Network interface speed monitor The name of the attribute to set. This is the name to be used in the constraints. Attribute name Network interface to monitor. Network interface Try to detect interface name by detecting the interface that holds the IP address. The IPv4 (dotted quad notation) or IPv6 address (colon hexadecimal notation) example IPv4 "192.168.1.1". example IPv6 "2001:db8:DC28:0:0:FC57:D4C8:1FFF". IPv4 or IPv6 address If not null and OCF_RESKEY_iface is a bridge, list of bridge ports to consider. Default is all ports which have designated_bridge=root_id. Bridge ports Relative weight of 1Gbps in interface speed. Can be used to tune how big attribute value will be. Weight of 1Gbps The time to wait (dampening) for further changes to occur. Dampening interval Log what have been done more verbosely. Verbose logging END } usage() { cat </dev/null)" if [ -z "$SP_OUT" ] then modprobe -s ocfs2_stack_user if [ $? != 0 ]; then ocf_log err "Could not load ocfs2_stack_user" return $OCF_ERR_INSTALLED fi fi SP_OUT="$(awk '/^'user'$/{print; exit}' "$LOADED_PLUGINS_FILE" 2>/dev/null)" if [ -z "$SP_OUT" ]; then ocf_log err "Switch to userspace stack unsuccessful" return $OCF_ERR_INSTALLED fi if [ -f "$CLUSTER_STACK_FILE" ]; then echo "$OCF_RESKEY_stack" >"$CLUSTER_STACK_FILE" if [ $? != 0 ]; then ocf_log err "Userspace stack '$OCF_RESKEY_stack' not supported" return $OCF_ERR_INSTALLED fi else ocf_log err "Switch to userspace stack not supported" return $OCF_ERR_INSTALLED fi driver_filesystem ocfs2; rc=$? if [ $rc != 0 ]; then modprobe -s ocfs2 if [ "$?" != 0 ]; then ocf_log err "Unable to load ocfs2 module" return $OCF_ERR_INSTALLED fi fi bringup_daemon return $? } o2cb_stop() { o2cb_monitor; rc=$? case $rc in $OCF_NOT_RUNNING) return $OCF_SUCCESS;; esac ocf_log info "Stopping $OCF_RESOURCE_INSTANCE" kill_daemon if [ $? != 0 ]; then ocf_log err "Unable to unload modules: the cluster is still online" return $OCF_ERR_GENERIC fi unload_filesystem ocfs2 if [ $? = 1 ]; then ocf_log err "Unable to unload ocfs2 module" return $OCF_ERR_GENERIC fi # If we can't find the stack glue, we have nothing to do. [ ! -e "$LOADED_PLUGINS_FILE" ] && return $OCF_SUCCESS while read plugin do unload_module "ocfs2_stack_${plugin}" if [ $? = 1 ]; then ocf_log err "Unable to unload ocfs2_stack_${plugin}" return $OCF_ERR_GENERIC fi done <"$LOADED_PLUGINS_FILE" unload_module "ocfs2_stackglue" if [ $? = 1 ]; then ocf_log err "Unable to unload ocfs2_stackglue" return $OCF_ERR_GENERIC fi # Don't unmount configfs - it's always in use by libdlm } o2cb_monitor() { o2cb_validate # Assume that ocfs2_controld will terminate if any of the conditions below are met driver_filesystem configfs; rc=$? if [ $rc != 0 ]; then ocf_log info "configfs not loaded" return $OCF_NOT_RUNNING fi check_filesystem configfs "${OCF_RESKEY_configfs}"; rc=$? if [ $rc != 0 ]; then ocf_log info "configfs not mounted" return $OCF_NOT_RUNNING fi if [ ! -e "$LOADED_PLUGINS_FILE" ]; then ocf_log info "Stack glue driver not loaded" return $OCF_NOT_RUNNING fi grep user "$LOADED_PLUGINS_FILE" >/dev/null 2>&1; rc=$? if [ $rc != 0 ]; then ocf_log err "Wrong stack `cat $LOADED_PLUGINS_FILE`" return $OCF_ERR_INSTALLED fi driver_filesystem ocfs2; rc=$? if [ $rc != 0 ]; then ocf_log info "ocfs2 not loaded" return $OCF_NOT_RUNNING fi status_daemon return $? } o2cb_usage() { echo "usage: $0 {start|stop|monitor|validate-all|meta-data}" echo " Expects to have a fully populated OCF RA-compliant environment set." echo " In particualr, a value for OCF_ROOT" } o2cb_validate() { check_binary ${DAEMON} case ${OCF_RESKEY_CRM_meta_globally_unique} in yes|Yes|true|True|1) ocf_log err "$OCF_RESOURCE_INSTANCE must be configured with the globally_unique=false meta attribute" exit $OCF_ERR_CONFIGURED ;; esac return $OCF_SUCCESS } meta_data() { cat < 1.0 OCFS2 daemon resource agent This Resource Agent controls the userspace daemon needed by OCFS2. Location where sysfs is mounted Sysfs location Location where configfs is mounted Configfs location Which userspace stack to use. Known values: pcmk Userspace stack Number of seconds to allow the control daemon to come up Daemon Timeout END } case $__OCF_ACTION in meta-data) meta_data exit $OCF_SUCCESS ;; start) o2cb_start ;; stop) o2cb_stop ;; monitor) o2cb_monitor ;; validate-all) o2cb_validate ;; usage|help) o2cb_usage exit $OCF_SUCCESS ;; *) o2cb_usage exit $OCF_ERR_UNIMPLEMENTED ;; esac exit $?