diff --git a/po/zh_CN.po b/po/zh_CN.po
index 93249f8848..bda104ce98 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -1,1136 +1,1200 @@
 #
 # Copyright 2003-2022 the Pacemaker project contributors
 #
 # The version control history for this file may have further details.
 #
 # This source code is licensed under the GNU Lesser General Public License
 # version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY.
 #
 #, fuzzy
 msgid ""
 msgstr ""
 "Project-Id-Version: Pacemaker 2\n"
 "Report-Msgid-Bugs-To: developers@clusterlabs.org\n"
-"POT-Creation-Date: 2023-12-05 15:13+0800\n"
+"POT-Creation-Date: 2024-01-11 11:22-0800\n"
 "PO-Revision-Date: 2021-11-08 11:04+0800\n"
 "Last-Translator: Vivi <developers@clusterlabs.org>\n"
 "Language-Team: CHINESE <wangluwei@uniontech.org>\n"
 "Language: zh_CN\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: daemons/controld/controld_control.c:526
-msgid "Pacemaker version on cluster node elected Designated Controller (DC)"
-msgstr "集群选定的控制器节点(DC)的 Pacemaker 版本"
-
-#: daemons/controld/controld_control.c:527
-msgid ""
-"Includes a hash which identifies the exact changeset the code was built "
-"from. Used for diagnostic purposes."
-msgstr "它包含一个标识所构建代码变更版本的哈希值，其可用于诊断。"
-
-#: daemons/controld/controld_control.c:532
-msgid "The messaging stack on which Pacemaker is currently running"
-msgstr "Pacemaker 正在使用的消息传输引擎"
-
-#: daemons/controld/controld_control.c:533
-msgid "Used for informational and diagnostic purposes."
-msgstr "用于提供信息和诊断。"
-
-#: daemons/controld/controld_control.c:537
-msgid "An arbitrary name for the cluster"
-msgstr "任意的集群名称"
-
-#: daemons/controld/controld_control.c:538
-msgid ""
-"This optional value is mostly for users' convenience as desired in "
-"administration, but may also be used in Pacemaker configuration rules via "
-"the #cluster-name node attribute, and by higher-level tools and resource "
-"agents."
-msgstr ""
-"该可选值主要是为了方便用户管理使用，也可以在pacemaker 配置规则中通过 "
-"#cluster-name 节点属性配置使用，也可以通过高级工具和资源代理使用。"
-
-#: daemons/controld/controld_control.c:546
-msgid "How long to wait for a response from other nodes during start-up"
-msgstr "启动过程中等待其他节点响应的时间"
-
-#: daemons/controld/controld_control.c:547
-msgid ""
-"The optimal value will depend on the speed and load of your network and the "
-"type of switches used."
-msgstr "其最佳值将取决于你的网络速度和负载以及所用交换机的类型。"
-
-#: daemons/controld/controld_control.c:552
-msgid ""
-"Zero disables polling, while positive values are an interval in "
-"seconds(unless other units are specified, for example \"5min\")"
-msgstr ""
-"设置为0将禁用轮询，设置为正数将是以秒为单位的时间间隔（除非使用了其他单位，比"
-"如\"5min\"表示5分钟）"
-
-#: daemons/controld/controld_control.c:555
-msgid ""
-"Polling interval to recheck cluster state and evaluate rules with date "
-"specifications"
-msgstr "重新检查集群状态并且评估具有日期规格的配置规则的轮询间隔"
-
-#: daemons/controld/controld_control.c:557
-msgid ""
-"Pacemaker is primarily event-driven, and looks ahead to know when to recheck "
-"cluster state for failure timeouts and most time-based rules. However, it "
-"will also recheck the cluster after this amount of inactivity, to evaluate "
-"rules with date specifications and serve as a fail-safe for certain types of "
-"scheduler bugs."
-msgstr ""
-"Pacemaker 主要是通过事件驱动的，并能预期重新检查集群状态以评估大多数基于时间"
-"的规则以及过期的错误。然而无论如何，在集群经过该时间间隔的不活动状态后，它还"
-"将重新检查集群，以评估具有日期规格的规则，并为某些类型的调度程序缺陷提供故障"
-"保护。"
-
-#: daemons/controld/controld_control.c:566
-msgid "Maximum amount of system load that should be used by cluster nodes"
-msgstr "集群节点应该使用的最大系统负载量"
-
-#: daemons/controld/controld_control.c:567
-msgid ""
-"The cluster will slow down its recovery process when the amount of system "
-"resources used (currently CPU) approaches this limit"
-msgstr "当使用的系统资源量（当前为CPU）接近此限制时，集群将减慢其恢复过程"
-
-#: daemons/controld/controld_control.c:573
-msgid ""
-"Maximum number of jobs that can be scheduled per node (defaults to 2x cores)"
-msgstr "每个节点可以调度的最大作业数（默认为2x内核数）"
-
-#: daemons/controld/controld_control.c:577
-msgid "How a cluster node should react if notified of its own fencing"
-msgstr "集群节点在收到针对自己的 fence 操作结果通知时应如何反应"
-
-#: daemons/controld/controld_control.c:578
-msgid ""
-"A cluster node may receive notification of its own fencing if fencing is "
-"misconfigured, or if fabric fencing is in use that doesn't cut cluster "
-"communication. Allowed values are \"stop\" to attempt to immediately stop "
-"Pacemaker and stay stopped, or \"panic\" to attempt to immediately reboot "
-"the local node, falling back to stop on failure."
-msgstr ""
-"如果有错误的 fence 配置，或者在使用 fabric fence 机制 (并不会切断集群通信），"
-"则集群节点可能会收到针对自己的 fence 结果通知。允许的值为 \"stop\" 尝试立即停"
-"止 pacemaker 并保持停用状态,或者 \"panic\" 尝试立即重新启动本地节点，并在失败"
-"时返回执行stop。"
-
-#: daemons/controld/controld_control.c:588
-msgid ""
-"Declare an election failed if it is not decided within this much time. If "
-"you need to adjust this value, it probably indicates the presence of a bug."
-msgstr ""
-"如果集群在本项设置时间内没有作出决定则宣布选举失败。如果您需要调整该值，这可"
-"能代表存在某些缺陷。"
-
-#: daemons/controld/controld_control.c:596
-msgid ""
-"Exit immediately if shutdown does not complete within this much time. If you "
-"need to adjust this value, it probably indicates the presence of a bug."
-msgstr ""
-"如果在这段时间内关机仍未完成，则立即退出。如果您需要调整该值，这可能代表存在"
-"某些缺陷。"
-
-#: daemons/controld/controld_control.c:604
-#: daemons/controld/controld_control.c:611
-msgid ""
-"If you need to adjust this value, it probably indicates the presence of a "
-"bug."
-msgstr "如果您需要调整该值，这可能代表存在某些缺陷。"
-
-#: daemons/controld/controld_control.c:617
-msgid ""
-"*** Advanced Use Only *** Enabling this option will slow down cluster "
-"recovery under all conditions"
-msgstr "*** Advanced Use Only *** 启用此选项将在所有情况下减慢集群恢复的速度"
-
-#: daemons/controld/controld_control.c:619
-msgid ""
-"Delay cluster recovery for this much time to allow for additional events to "
-"occur. Useful if your configuration is sensitive to the order in which ping "
-"updates arrive."
-msgstr ""
-"集群恢复将被推迟指定的时间间隔，以等待更多事件发生。如果您的配置对 ping 更新"
-"到达的顺序很敏感，这就很有用"
-
-#: daemons/controld/controld_control.c:626
+#: daemons/fenced/pacemaker-fenced.c:537
 #, fuzzy
 msgid ""
-"How long before nodes can be assumed to be safely down when watchdog-based "
-"self-fencing via SBD is in use"
-msgstr ""
-"当基于 watchdog 的自我 fence 机制通过SBD 被执行时，我们可以假设节点安全关闭之"
-"前需要等待多长时间"
-
-#: daemons/controld/controld_control.c:628
-msgid ""
-"If this is set to a positive value, lost nodes are assumed to self-fence "
-"using watchdog-based SBD within this much time. This does not require a "
-"fencing resource to be explicitly configured, though a fence_watchdog "
-"resource can be configured, to limit use to specific nodes. If this is set "
-"to 0 (the default), the cluster will never assume watchdog-based self-"
-"fencing. If this is set to a negative value, the cluster will use twice the "
-"local value of the `SBD_WATCHDOG_TIMEOUT` environment variable if that is "
-"positive, or otherwise treat this as 0. WARNING: When used, this timeout "
-"must be larger than `SBD_WATCHDOG_TIMEOUT` on all nodes that use watchdog-"
-"based SBD, and Pacemaker will refuse to start on any of those nodes where "
-"this is not true for the local value or SBD is not active. When this is set "
-"to a negative value, `SBD_WATCHDOG_TIMEOUT` must be set to the same value on "
-"all nodes that use SBD, otherwise data corruption or loss could occur."
-msgstr ""
-"如果设置为正值，则假定丢失的节点在这段时间内使用基于watchdog的SBD进行自我防"
-"护。这不需要明确配置fence资源，但可以配置一个fence_watchdog资源，以限制特定节"
-"点的使用。如果设置为0（默认值），集群将永远不会假定基于watchdog的自我防护。如"
-"果设置为负值，且如果`SBD_WATCHDOG_TIMEOUT`环境变量的本地值为正值，则集群将使"
-"用该值的两倍，否则将其视为0。警告：在使用基于watchdog的SBD的所有节点上，此超"
-"时必须大于`SBD_WATCGDOG_TIMEOUT`,如果本地值不是这样，或者SBD未运行，则"
-"Pacemaker将拒绝在任何节点上启动。如果设置为负值，则在使用SBD的所有节点上，"
-"`SBD_WATCHDOG_TIMEOUT`必须设置为相同的值，否则可能会发生数据损坏或丢失。"
-
-#: daemons/controld/controld_control.c:647
-msgid ""
-"How many times fencing can fail before it will no longer be immediately re-"
-"attempted on a target"
-msgstr "fence操作失败多少次会停止立即尝试"
-
-#: daemons/controld/controld_control.c:655 lib/pengine/common.c:40
-msgid "What to do when the cluster does not have quorum"
-msgstr "当集群没有必需票数时该如何作"
-
-#: daemons/controld/controld_control.c:660 lib/pengine/common.c:74
-msgid "Whether to lock resources to a cleanly shut down node"
-msgstr "是否锁定资源到完全关闭的节点"
-
-#: daemons/controld/controld_control.c:661 lib/pengine/common.c:75
-msgid ""
-"When true, resources active on a node when it is cleanly shut down are kept "
-"\"locked\" to that node (not allowed to run elsewhere) until they start "
-"again on that node after it rejoins (or for at most shutdown-lock-limit, if "
-"set). Stonith resources and Pacemaker Remote connections are never locked. "
-"Clone and bundle instances and the promoted role of promotable clones are "
-"currently never locked, though support could be added in a future release."
-msgstr ""
-"设置为true时，在完全关闭的节点上活动的资源将被“锁定”到该节点（不允许在其他地"
-"方运行），直到该节点重新加入后资源重新启动（或最长shutdown-lock-limit，如果已"
-"设置）。 Stonith资源和Pacemaker Remote连接永远不会被锁定。 克隆和捆绑实例以及"
-"可升级克隆的主角色目前从未锁定，尽管可以在将来的发行版中添加支持。"
-
-#: daemons/controld/controld_control.c:673 lib/pengine/common.c:87
-msgid "Do not lock resources to a cleanly shut down node longer than this"
-msgstr "资源会被锁定到完全关闭的节点的最长时间"
-
-#: daemons/controld/controld_control.c:675 lib/pengine/common.c:89
-msgid ""
-"If shutdown-lock is true and this is set to a nonzero time duration, "
-"shutdown locks will expire after this much time has passed since the "
-"shutdown was initiated, even if the node has not rejoined."
-msgstr ""
-"如果shutdown-lock为true，并且将此选项设置为非零持续时间，则自从开始shutdown以"
-"来经过了这么长的时间后，shutdown锁将过期，即使该节点尚未重新加入。"
-
-#: daemons/controld/controld_control.c:683 lib/pengine/common.c:164
-msgid ""
-"How long to wait for a node that has joined the cluster to join the "
-"controller process group"
-msgstr ""
-"等待已加入集群的节点加入控制器进程组的时间"
-
-#: daemons/controld/controld_control.c:685 lib/pengine/common.c:166
-msgid ""
-"Fence nodes that do not join the controller process group within this much "
-"time after joining the cluster, to allow the cluster to continue managing "
-"resources. A value of 0 means never fence pending nodes. Setting the value "
-"to 2h means fence nodes after 2 hours."
-msgstr ""
-"如果节点加入集群后在此时间内不加入控制器进程组，Fence该节点，以便群集继续管理资源。"
-"值为0表示永远不 fence 待定节点。将值设置为2h表示2小时后 fence 待定节点。"
-
-#: daemons/fenced/pacemaker-fenced.c:536
-msgid "Advanced use only: An alternate parameter to supply instead of 'port'"
+"*** Advanced Use Only *** An alternate parameter to supply instead of 'port'"
 msgstr "仅高级使用：使用替代的参数名，而不是'port'"
 
-#: daemons/fenced/pacemaker-fenced.c:537
+#: daemons/fenced/pacemaker-fenced.c:539
+#, fuzzy
 msgid ""
-"some devices do not support the standard 'port' parameter or may provide "
+"Some devices do not support the standard 'port' parameter or may provide "
 "additional ones. Use this to specify an alternate, device-specific, "
-"parameter that should indicate the machine to be fenced. A value of none can "
-"be used to tell the cluster not to supply any additional parameters."
+"parameter that should indicate the machine to be fenced. A value of \"none\" "
+"can be used to tell the cluster not to supply any additional parameters."
 msgstr ""
 "一些设备不支持标准的'port'参数，或者可能提供其他参数。使用此选项可指定一个该"
 "设备专用的参数名，该参数用于标识需要fence的机器。值none可以用于告诉集群不要提"
 "供任何其他的参数。"
 
-#: daemons/fenced/pacemaker-fenced.c:546
+#: daemons/fenced/pacemaker-fenced.c:549
+#, fuzzy
 msgid ""
-"A mapping of host names to ports numbers for devices that do not support "
-"host names."
+"A mapping of node names to port numbers for devices that do not support node "
+"names."
 msgstr "为不支持主机名的设备提供主机名到端口号的映射。"
 
-#: daemons/fenced/pacemaker-fenced.c:547
+#: daemons/fenced/pacemaker-fenced.c:551
+#, fuzzy
 msgid ""
-"Eg. node1:1;node2:2,3 would tell the cluster to use port 1 for node1 and "
-"ports 2 and 3 for node2"
+"For example, \"node1:1;node2:2,3\" would tell the cluster to use port 1 for "
+"node1 and ports 2 and 3 for node2."
 msgstr ""
 "例如 node1:1;node2:2,3，将会告诉集群对node1使用端口1,对node2使用端口2和3 "
 
-#: daemons/fenced/pacemaker-fenced.c:551
-msgid "Eg. node1,node2,node3"
-msgstr "例如 node1,node2,node3"
-
-#: daemons/fenced/pacemaker-fenced.c:552
+#: daemons/fenced/pacemaker-fenced.c:558
+#, fuzzy
 msgid ""
-"A list of machines controlled by this device (Optional unless "
-"pcmk_host_list=static-list)"
+"A list of nodes that can be targeted by this device (optional unless "
+"pcmk_host_list=\"static-list\")"
 msgstr "该设备控制的机器列表(可选参数，除非 pcmk_host_list 设置为 static-list)"
 
-#: daemons/fenced/pacemaker-fenced.c:557
-msgid "How to determine which machines are controlled by the device."
+#: daemons/fenced/pacemaker-fenced.c:560
+#, fuzzy
+msgid "For example, \"node1,node2,node3\"."
+msgstr "例如 node1,node2,node3"
+
+#: daemons/fenced/pacemaker-fenced.c:567
+#, fuzzy
+msgid "How to determine which nodes can be targeted by the device"
 msgstr "如何确定设备控制哪些机器。"
 
-#: daemons/fenced/pacemaker-fenced.c:558
+#: daemons/fenced/pacemaker-fenced.c:568
+#, fuzzy
 msgid ""
-"Allowed values: dynamic-list (query the device via the 'list' command), "
-"static-list (check the pcmk_host_list attribute), status (query the device "
-"via the 'status' command), none (assume every device can fence every machine)"
+"Use \"dynamic-list\" to query the device via the 'list' command; \"static-"
+"list\" to check the pcmk_host_list attribute; \"status\" to query the device "
+"via the 'status' command; or \"none\" to assume every device can fence every "
+"node."
 msgstr ""
 "允许的值：dynamic-list（通过'list'命令查询设备），static-list（检查"
 "pcmk_host_list属性），status（通过'status'命令查询设备），none（假设每个设备"
 "都可fence 每台机器 ）"
 
-#: daemons/fenced/pacemaker-fenced.c:567 daemons/fenced/pacemaker-fenced.c:576
+#: daemons/fenced/pacemaker-fenced.c:577 daemons/fenced/pacemaker-fenced.c:588
 msgid "Enable a base delay for fencing actions and specify base delay value."
 msgstr "在执行 fencing 操作前启用不超过指定时间的延迟。"
 
-#: daemons/fenced/pacemaker-fenced.c:568
+#: daemons/fenced/pacemaker-fenced.c:579
 msgid ""
 "Enable a delay of no more than the time specified before executing fencing "
 "actions. Pacemaker derives the overall delay by taking the value of "
 "pcmk_delay_base and adding a random delay value such that the sum is kept "
 "below this maximum."
 msgstr ""
 "在执行 fencing 操作前启用不超过指定时间的延迟。 Pacemaker通过获取"
 "pcmk_delay_base的值并添加随机延迟值来得出总体延迟,从而使总和保持在此最大值以"
 "下。"
 
-#: daemons/fenced/pacemaker-fenced.c:578
+#: daemons/fenced/pacemaker-fenced.c:590
+#, fuzzy
 msgid ""
 "This enables a static delay for fencing actions, which can help avoid "
 "\"death matches\" where two nodes try to fence each other at the same time. "
-"If pcmk_delay_max  is also used, a random delay will be added such that the "
-"total delay is kept below that value.This can be set to a single time value "
+"If pcmk_delay_max is also used, a random delay will be added such that the "
+"total delay is kept below that value. This can be set to a single time value "
 "to apply to any node targeted by this device (useful if a separate device is "
 "configured for each target), or to a node map (for example, \"node1:1s;"
-"node2:5\") to set a different value per target."
+"node2:5\") to set a different value for each target."
 msgstr ""
 "这使fencing 操作启用静态延迟，这可以帮助避免\"death matches\"即两个节点试图同"
 "时互相fence.如果还使用了pcmk_delay_max，则将添加随机延迟，以使总延迟保持在该"
 "值以下。可以将其设置为单个时间值，以应用于该设备针对的任何节点（适用于为每个"
 "目标分别配置了各自的设备的情况）， 或着设置为一个节点映射 （例如，\"node1:1s;"
 "node2:5\"）从而为每个目标设置不同值。"
 
-#: daemons/fenced/pacemaker-fenced.c:590
+#: daemons/fenced/pacemaker-fenced.c:603
 msgid ""
 "The maximum number of actions can be performed in parallel on this device"
 msgstr "可以在该设备上并发执行的最多操作数量"
 
-#: daemons/fenced/pacemaker-fenced.c:591
+#: daemons/fenced/pacemaker-fenced.c:605
+#, fuzzy
 msgid ""
-"Cluster property concurrent-fencing=true needs to be configured first.Then "
-"use this to specify the maximum number of actions can be performed in "
-"parallel on this device. -1 is unlimited."
+"Cluster property concurrent-fencing=\"true\" needs to be configured first. "
+"Then use this to specify the maximum number of actions can be performed in "
+"parallel on this device. A value of -1 means an unlimited number of actions "
+"can be performed in parallel."
 msgstr ""
 "需要首先配置集群属性 concurrent-fencing=true 。然后使用此参数指定可以在该设备"
 "上并发执行的最多操作数量。 -1 代表没有限制"
 
-#: daemons/fenced/pacemaker-fenced.c:597
-msgid "Advanced use only: An alternate command to run instead of 'reboot'"
+#: daemons/fenced/pacemaker-fenced.c:615
+#, fuzzy
+msgid ""
+"*** Advanced Use Only *** An alternate command to run instead of 'reboot'"
 msgstr "仅高级使用：运行替代命令，而不是'reboot'"
 
-#: daemons/fenced/pacemaker-fenced.c:598
+#: daemons/fenced/pacemaker-fenced.c:617
+#, fuzzy
 msgid ""
 "Some devices do not support the standard commands or may provide additional "
-"ones.\n"
-"Use this to specify an alternate, device-specific, command that implements "
-"the 'reboot' action."
+"ones. Use this to specify an alternate, device-specific, command that "
+"implements the 'reboot' action."
 msgstr ""
 "一些设备不支持标准命令或可能提供其他命令，使用此选项可以指定一个该设备特定的"
 "替代命令，用来实现'reboot'操作。"
 
-#: daemons/fenced/pacemaker-fenced.c:603
+#: daemons/fenced/pacemaker-fenced.c:625
+#, fuzzy
 msgid ""
-"Advanced use only: Specify an alternate timeout to use for reboot actions "
-"instead of stonith-timeout"
+"*** Advanced Use Only *** Specify an alternate timeout to use for 'reboot' "
+"actions instead of stonith-timeout"
 msgstr "仅高级使用：指定用于'reboot' 操作的替代超时，而不是stonith-timeout"
 
-#: daemons/fenced/pacemaker-fenced.c:604
+#: daemons/fenced/pacemaker-fenced.c:628
+#, fuzzy
 msgid ""
-"Some devices need much more/less time to complete than normal.Use this to "
+"Some devices need much more/less time to complete than normal. Use this to "
 "specify an alternate, device-specific, timeout for 'reboot' actions."
 msgstr ""
 "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
 "于'reboot'操作的该设备特定的替代超时。"
 
-#: daemons/fenced/pacemaker-fenced.c:609
+#: daemons/fenced/pacemaker-fenced.c:636
+#, fuzzy
 msgid ""
-"Advanced use only: The maximum number of times to retry the 'reboot' command "
-"within the timeout period"
+"*** Advanced Use Only *** The maximum number of times to try the 'reboot' "
+"command within the timeout period"
 msgstr "仅高级使用：在超时前重试'reboot'命令的最大次数"
 
-#: daemons/fenced/pacemaker-fenced.c:610
+#: daemons/fenced/pacemaker-fenced.c:639
+#, fuzzy
 msgid ""
-"Some devices do not support multiple connections. Operations may 'fail' if "
-"the device is busy with another task so Pacemaker will automatically retry "
-"the operation,      if there is time remaining. Use this option to alter the "
-"number of times Pacemaker retries 'reboot' actions before giving up."
+"Some devices do not support multiple connections. Operations may \"fail\" if "
+"the device is busy with another task. In that case, Pacemaker will "
+"automatically retry the operation if there is time remaining. Use this "
+"option to alter the number of times Pacemaker tries a 'reboot' action before "
+"giving up."
 msgstr ""
 "一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ，因此"
 "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
 "试'reboot' 操作的次数."
 
-#: daemons/fenced/pacemaker-fenced.c:617
-msgid "Advanced use only: An alternate command to run instead of 'off'"
+#: daemons/fenced/pacemaker-fenced.c:649
+#, fuzzy
+msgid "*** Advanced Use Only *** An alternate command to run instead of 'off'"
 msgstr "仅高级使用：运行替代命令，而不是'off'"
 
-#: daemons/fenced/pacemaker-fenced.c:618
+#: daemons/fenced/pacemaker-fenced.c:651
+#, fuzzy
 msgid ""
 "Some devices do not support the standard commands or may provide additional "
-"ones.Use this to specify an alternate, device-specific, command that "
+"ones. Use this to specify an alternate, device-specific, command that "
 "implements the 'off' action."
 msgstr ""
 "一些设备不支持标准命令或可能提供其他命令,使用此选项可指定一个该设备专用的替代"
 "命令，用来实现'off'操作。"
 
-#: daemons/fenced/pacemaker-fenced.c:623
+#: daemons/fenced/pacemaker-fenced.c:659
+#, fuzzy
 msgid ""
-"Advanced use only: Specify an alternate timeout to use for off actions "
-"instead of stonith-timeout"
+"*** Advanced Use Only *** Specify an alternate timeout to use for 'off' "
+"actions instead of stonith-timeout"
 msgstr "仅高级使用：指定用于off 操作的替代超时，而不是stonith-timeout"
 
-#: daemons/fenced/pacemaker-fenced.c:624
+#: daemons/fenced/pacemaker-fenced.c:662
+#, fuzzy
 msgid ""
-"Some devices need much more/less time to complete than normal.Use this to "
+"Some devices need much more/less time to complete than normal. Use this to "
 "specify an alternate, device-specific, timeout for 'off' actions."
 msgstr ""
 "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
 "于'off'操作的该设备特定的替代超时。"
 
-#: daemons/fenced/pacemaker-fenced.c:629
+#: daemons/fenced/pacemaker-fenced.c:670
+#, fuzzy
 msgid ""
-"Advanced use only: The maximum number of times to retry the 'off' command "
-"within the timeout period"
+"*** Advanced Use Only *** The maximum number of times to try the 'off' "
+"command within the timeout period"
 msgstr "仅高级使用：在超时前重试'off'命令的最大次数"
 
-#: daemons/fenced/pacemaker-fenced.c:630
+#: daemons/fenced/pacemaker-fenced.c:673
+#, fuzzy
 msgid ""
-"Some devices do not support multiple connections. Operations may 'fail' if "
-"the device is busy with another task so Pacemaker will automatically retry "
-"the operation,      if there is time remaining. Use this option to alter the "
-"number of times Pacemaker retries 'off' actions before giving up."
+"Some devices do not support multiple connections. Operations may \"fail\" if "
+"the device is busy with another task. In that case, Pacemaker will "
+"automatically retry the operation if there is time remaining. Use this "
+"option to alter the number of times Pacemaker tries a 'off' action before "
+"giving up."
 msgstr ""
 " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此"
 "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
 "试'off' 操作的次数."
 
-#: daemons/fenced/pacemaker-fenced.c:637
-msgid "Advanced use only: An alternate command to run instead of 'on'"
+#: daemons/fenced/pacemaker-fenced.c:683
+#, fuzzy
+msgid "*** Advanced Use Only *** An alternate command to run instead of 'on'"
 msgstr "仅高级使用：运行替代命令，而不是'on'"
 
-#: daemons/fenced/pacemaker-fenced.c:638
+#: daemons/fenced/pacemaker-fenced.c:685
+#, fuzzy
 msgid ""
 "Some devices do not support the standard commands or may provide additional "
-"ones.Use this to specify an alternate, device-specific, command that "
+"ones. Use this to specify an alternate, device-specific, command that "
 "implements the 'on' action."
 msgstr ""
 "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
 "代命令，用来实现'on'操作。"
 
-#: daemons/fenced/pacemaker-fenced.c:643
+#: daemons/fenced/pacemaker-fenced.c:693
+#, fuzzy
 msgid ""
-"Advanced use only: Specify an alternate timeout to use for on actions "
-"instead of stonith-timeout"
+"*** Advanced Use Only *** Specify an alternate timeout to use for 'on' "
+"actions instead of stonith-timeout"
 msgstr "仅高级使用：指定用于on 操作的替代超时，而不是stonith-timeout"
 
-#: daemons/fenced/pacemaker-fenced.c:644
+#: daemons/fenced/pacemaker-fenced.c:696
+#, fuzzy
 msgid ""
-"Some devices need much more/less time to complete than normal.Use this to "
+"Some devices need much more/less time to complete than normal. Use this to "
 "specify an alternate, device-specific, timeout for 'on' actions."
 msgstr ""
 "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
 "于'on'操作的该设备特定的替代超时。"
 
-#: daemons/fenced/pacemaker-fenced.c:649
+#: daemons/fenced/pacemaker-fenced.c:704
+#, fuzzy
 msgid ""
-"Advanced use only: The maximum number of times to retry the 'on' command "
-"within the timeout period"
+"*** Advanced Use Only *** The maximum number of times to try the 'on' "
+"command within the timeout period"
 msgstr "仅高级使用：在超时前重试'on'命令的最大次数"
 
-#: daemons/fenced/pacemaker-fenced.c:650
+#: daemons/fenced/pacemaker-fenced.c:707
+#, fuzzy
 msgid ""
-"Some devices do not support multiple connections. Operations may 'fail' if "
-"the device is busy with another task so Pacemaker will automatically retry "
-"the operation,      if there is time remaining. Use this option to alter the "
-"number of times Pacemaker retries 'on' actions before giving up."
+"Some devices do not support multiple connections. Operations may \"fail\" if "
+"the device is busy with another task. In that case, Pacemaker will "
+"automatically retry the operation if there is time remaining. Use this "
+"option to alter the number of times Pacemaker tries a 'on' action before "
+"giving up."
 msgstr ""
 " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此"
 "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
 "试'on' 操作的次数."
 
-#: daemons/fenced/pacemaker-fenced.c:657
-msgid "Advanced use only: An alternate command to run instead of 'list'"
+#: daemons/fenced/pacemaker-fenced.c:717
+#, fuzzy
+msgid "*** Advanced Use Only *** An alternate command to run instead of 'list'"
 msgstr "仅高级使用：运行替代命令，而不是'list'"
 
-#: daemons/fenced/pacemaker-fenced.c:658
+#: daemons/fenced/pacemaker-fenced.c:719
+#, fuzzy
 msgid ""
 "Some devices do not support the standard commands or may provide additional "
-"ones.Use this to specify an alternate, device-specific, command that "
+"ones. Use this to specify an alternate, device-specific, command that "
 "implements the 'list' action."
 msgstr ""
 "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
 "代命令，用来实现'list'操作。"
 
-#: daemons/fenced/pacemaker-fenced.c:663
+#: daemons/fenced/pacemaker-fenced.c:727
+#, fuzzy
 msgid ""
-"Advanced use only: Specify an alternate timeout to use for list actions "
-"instead of stonith-timeout"
+"*** Advanced Use Only *** Specify an alternate timeout to use for 'list' "
+"actions instead of stonith-timeout"
 msgstr "仅高级使用：指定用于list 操作的替代超时，而不是stonith-timeout"
 
-#: daemons/fenced/pacemaker-fenced.c:664
+#: daemons/fenced/pacemaker-fenced.c:730
+#, fuzzy
 msgid ""
-"Some devices need much more/less time to complete than normal.Use this to "
+"Some devices need much more/less time to complete than normal. Use this to "
 "specify an alternate, device-specific, timeout for 'list' actions."
 msgstr ""
 "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
 "于'list'操作的该设备特定的替代超时。"
 
-#: daemons/fenced/pacemaker-fenced.c:669
+#: daemons/fenced/pacemaker-fenced.c:738
+#, fuzzy
 msgid ""
-"Advanced use only: The maximum number of times to retry the 'list' command "
-"within the timeout period"
+"*** Advanced Use Only *** The maximum number of times to try the 'list' "
+"command within the timeout period"
 msgstr "仅高级使用：在超时前重试'list'命令的最大次数"
 
-#: daemons/fenced/pacemaker-fenced.c:670
+#: daemons/fenced/pacemaker-fenced.c:741
+#, fuzzy
 msgid ""
-"Some devices do not support multiple connections. Operations may 'fail' if "
-"the device is busy with another task so Pacemaker will automatically retry "
-"the operation,      if there is time remaining. Use this option to alter the "
-"number of times Pacemaker retries 'list' actions before giving up."
+"Some devices do not support multiple connections. Operations may \"fail\" if "
+"the device is busy with another task. In that case, Pacemaker will "
+"automatically retry the operation if there is time remaining. Use this "
+"option to alter the number of times Pacemaker tries a 'list' action before "
+"giving up."
 msgstr ""
 " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此"
 "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
 "试'list' 操作的次数."
 
-#: daemons/fenced/pacemaker-fenced.c:677
-msgid "Advanced use only: An alternate command to run instead of 'monitor'"
+#: daemons/fenced/pacemaker-fenced.c:751
+#, fuzzy
+msgid ""
+"*** Advanced Use Only *** An alternate command to run instead of 'monitor'"
 msgstr "仅高级使用：运行替代命令，而不是'monitor'"
 
-#: daemons/fenced/pacemaker-fenced.c:678
+#: daemons/fenced/pacemaker-fenced.c:753
+#, fuzzy
 msgid ""
 "Some devices do not support the standard commands or may provide additional "
-"ones.Use this to specify an alternate, device-specific, command that "
+"ones. Use this to specify an alternate, device-specific, command that "
 "implements the 'monitor' action."
 msgstr ""
 "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
 "代命令，用来实现'monitor'操作。"
 
-#: daemons/fenced/pacemaker-fenced.c:683
+#: daemons/fenced/pacemaker-fenced.c:761
+#, fuzzy
 msgid ""
-"Advanced use only: Specify an alternate timeout to use for monitor actions "
-"instead of stonith-timeout"
+"*** Advanced Use Only *** Specify an alternate timeout to use for 'monitor' "
+"actions instead of stonith-timeout"
 msgstr "仅高级使用：指定用于monitor 操作的替代超时，而不是stonith-timeout"
 
-#: daemons/fenced/pacemaker-fenced.c:684
+#: daemons/fenced/pacemaker-fenced.c:764
+#, fuzzy
 msgid ""
-"Some devices need much more/less time to complete than normal.\n"
-"Use this to specify an alternate, device-specific, timeout for 'monitor' "
-"actions."
+"Some devices need much more/less time to complete than normal. Use this to "
+"specify an alternate, device-specific, timeout for 'monitor' actions."
 msgstr ""
 "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
 "于'monitor'操作的该设备特定的替代超时。"
 
-#: daemons/fenced/pacemaker-fenced.c:689
+#: daemons/fenced/pacemaker-fenced.c:772
+#, fuzzy
 msgid ""
-"Advanced use only: The maximum number of times to retry the 'monitor' "
+"*** Advanced Use Only *** The maximum number of times to try the 'monitor' "
 "command within the timeout period"
 msgstr "仅高级使用：在超时前重试'monitor'命令的最大次数"
 
-#: daemons/fenced/pacemaker-fenced.c:690
+#: daemons/fenced/pacemaker-fenced.c:775
+#, fuzzy
 msgid ""
-"Some devices do not support multiple connections. Operations may 'fail' if "
-"the device is busy with another task so Pacemaker will automatically retry "
-"the operation,      if there is time remaining. Use this option to alter the "
-"number of times Pacemaker retries 'monitor' actions before giving up."
+"Some devices do not support multiple connections. Operations may \"fail\" if "
+"the device is busy with another task. In that case, Pacemaker will "
+"automatically retry the operation if there is time remaining. Use this "
+"option to alter the number of times Pacemaker tries a 'monitor' action "
+"before giving up."
 msgstr ""
 " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此"
 "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
 "试'monitor' 操作的次数."
 
-#: daemons/fenced/pacemaker-fenced.c:697
-msgid "Advanced use only: An alternate command to run instead of 'status'"
+#: daemons/fenced/pacemaker-fenced.c:785
+#, fuzzy
+msgid ""
+"*** Advanced Use Only *** An alternate command to run instead of 'status'"
 msgstr "仅高级使用：运行替代命令，而不是'status'"
 
-#: daemons/fenced/pacemaker-fenced.c:698
+#: daemons/fenced/pacemaker-fenced.c:787
+#, fuzzy
 msgid ""
 "Some devices do not support the standard commands or may provide additional "
-"ones.Use this to specify an alternate, device-specific, command that "
+"ones. Use this to specify an alternate, device-specific, command that "
 "implements the 'status' action."
 msgstr ""
-"一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
-"代命令，用来实现'status'操作。"
+"一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替"
+"代命令，用来实现'status'操作。"
+
+#: daemons/fenced/pacemaker-fenced.c:795
+#, fuzzy
+msgid ""
+"*** Advanced Use Only *** Specify an alternate timeout to use for 'status' "
+"actions instead of stonith-timeout"
+msgstr "仅高级使用：指定用于status 操作的替代超时，而不是stonith-timeout"
+
+#: daemons/fenced/pacemaker-fenced.c:798
+#, fuzzy
+msgid ""
+"Some devices need much more/less time to complete than normal. Use this to "
+"specify an alternate, device-specific, timeout for 'status' actions."
+msgstr ""
+"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
+"于'status'操作的该设备特定的替代超时"
+
+#: daemons/fenced/pacemaker-fenced.c:806
+#, fuzzy
+msgid ""
+"*** Advanced Use Only *** The maximum number of times to try the 'status' "
+"command within the timeout period"
+msgstr "仅高级使用：在超时前重试'status'命令的最大次数"
+
+#: daemons/fenced/pacemaker-fenced.c:809
+#, fuzzy
+msgid ""
+"Some devices do not support multiple connections. Operations may \"fail\" if "
+"the device is busy with another task. In that case, Pacemaker will "
+"automatically retry the operation if there is time remaining. Use this "
+"option to alter the number of times Pacemaker tries a 'status' action before "
+"giving up."
+msgstr ""
+" 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此"
+"Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
+"试'status' 操作的次数."
+
+#: daemons/fenced/pacemaker-fenced.c:821
+msgid "Instance attributes available for all \"stonith\"-class resources"
+msgstr " 可用于所有stonith类资源的实例属性"
+
+#: daemons/fenced/pacemaker-fenced.c:823
+msgid ""
+"Instance attributes available for all \"stonith\"-class resources and used "
+"by Pacemaker's fence daemon, formerly known as stonithd"
+msgstr ""
+" 可用于所有stonith类资源的实例属性，并由Pacemaker的fence守护程序使用（以前称"
+"为stonithd)"
+
+#: daemons/fenced/pacemaker-fenced.c:838
+msgid "Deprecated (will be removed in a future release)"
+msgstr "已弃用(将在未来版本中删除)"
+
+#: daemons/fenced/pacemaker-fenced.c:841
+msgid "Intended for use in regression testing only"
+msgstr "仅适用于回归测试"
+
+#: daemons/fenced/pacemaker-fenced.c:844
+msgid "Send logs to the additional named logfile"
+msgstr "将日志发送到其他命名日志文件"
+
+#: lib/common/options.c:57
+msgid "Pacemaker version on cluster node elected Designated Controller (DC)"
+msgstr "集群选定的控制器节点(DC)的 Pacemaker 版本"
+
+#: lib/common/options.c:59
+msgid ""
+"Includes a hash which identifies the exact changeset the code was built "
+"from. Used for diagnostic purposes."
+msgstr "它包含一个标识所构建代码变更版本的哈希值，其可用于诊断。"
+
+#: lib/common/options.c:66
+msgid "The messaging stack on which Pacemaker is currently running"
+msgstr "Pacemaker 正在使用的消息传输引擎"
+
+#: lib/common/options.c:67
+msgid "Used for informational and diagnostic purposes."
+msgstr "用于提供信息和诊断。"
+
+#: lib/common/options.c:73
+msgid "An arbitrary name for the cluster"
+msgstr "任意的集群名称"
+
+#: lib/common/options.c:74
+msgid ""
+"This optional value is mostly for users' convenience as desired in "
+"administration, but may also be used in Pacemaker configuration rules via "
+"the #cluster-name node attribute, and by higher-level tools and resource "
+"agents."
+msgstr ""
+"该可选值主要是为了方便用户管理使用，也可以在pacemaker 配置规则中通过 "
+"#cluster-name 节点属性配置使用，也可以通过高级工具和资源代理使用。"
+
+#: lib/common/options.c:83
+msgid "How long to wait for a response from other nodes during start-up"
+msgstr "启动过程中等待其他节点响应的时间"
 
-#: daemons/fenced/pacemaker-fenced.c:703
+#: lib/common/options.c:84
 msgid ""
-"Advanced use only: Specify an alternate timeout to use for status actions "
-"instead of stonith-timeout"
-msgstr "仅高级使用：指定用于status 操作的替代超时，而不是stonith-timeout"
+"The optimal value will depend on the speed and load of your network and the "
+"type of switches used."
+msgstr "其最佳值将取决于你的网络速度和负载以及所用交换机的类型。"
 
-#: daemons/fenced/pacemaker-fenced.c:704
+#: lib/common/options.c:89
+#, fuzzy
 msgid ""
-"Some devices need much more/less time to complete than normal.Use this to "
-"specify an alternate, device-specific, timeout for 'status' actions."
+"Zero disables polling, while positive values are an interval in seconds "
+"(unless other units are specified, for example \"5min\")"
 msgstr ""
-"一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用"
-"于'status'操作的该设备特定的替代超时"
+"设置为0将禁用轮询，设置为正数将是以秒为单位的时间间隔（除非使用了其他单位，比"
+"如\"5min\"表示5分钟）"
 
-#: daemons/fenced/pacemaker-fenced.c:709
+#: lib/common/options.c:93
 msgid ""
-"Advanced use only: The maximum number of times to retry the 'status' command "
-"within the timeout period"
-msgstr "仅高级使用：在超时前重试'status'命令的最大次数"
+"Polling interval to recheck cluster state and evaluate rules with date "
+"specifications"
+msgstr "重新检查集群状态并且评估具有日期规格的配置规则的轮询间隔"
 
-#: daemons/fenced/pacemaker-fenced.c:710
+#: lib/common/options.c:95
 msgid ""
-"Some devices do not support multiple connections. Operations may 'fail' if "
-"the device is busy with another task so Pacemaker will automatically retry "
-"the operation,      if there is time remaining. Use this option to alter the "
-"number of times Pacemaker retries 'status' actions before giving up."
+"Pacemaker is primarily event-driven, and looks ahead to know when to recheck "
+"cluster state for failure timeouts and most time-based rules. However, it "
+"will also recheck the cluster after this amount of inactivity, to evaluate "
+"rules with date specifications and serve as a fail-safe for certain types of "
+"scheduler bugs."
 msgstr ""
-" 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此"
-"Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重"
-"试'status' 操作的次数."
+"Pacemaker 主要是通过事件驱动的，并能预期重新检查集群状态以评估大多数基于时间"
+"的规则以及过期的错误。然而无论如何，在集群经过该时间间隔的不活动状态后，它还"
+"将重新检查集群，以评估具有日期规格的规则，并为某些类型的调度程序缺陷提供故障"
+"保护。"
 
-#: daemons/fenced/pacemaker-fenced.c:719
-msgid "Instance attributes available for all \"stonith\"-class resources"
-msgstr " 可用于所有stonith类资源的实例属性"
+#: lib/common/options.c:105
+msgid "How a cluster node should react if notified of its own fencing"
+msgstr "集群节点在收到针对自己的 fence 操作结果通知时应如何反应"
 
-#: daemons/fenced/pacemaker-fenced.c:721
+#: lib/common/options.c:106
+#, fuzzy
 msgid ""
-"Instance attributes available for all \"stonith\"-class resources and used "
-"by Pacemaker's fence daemon, formerly known as stonithd"
+"A cluster node may receive notification of its own fencing if fencing is "
+"misconfigured, or if fabric fencing is in use that doesn't cut cluster "
+"communication. Use \"stop\" to attempt to immediately stop Pacemaker and "
+"stay stopped, or \"panic\" to attempt to immediately reboot the local node, "
+"falling back to stop on failure."
 msgstr ""
-" 可用于所有stonith类资源的实例属性，并由Pacemaker的fence守护程序使用（以前称"
-"为stonithd)"
+"如果有错误的 fence 配置，或者在使用 fabric fence 机制 (并不会切断集群通信），"
+"则集群节点可能会收到针对自己的 fence 结果通知。允许的值为 \"stop\" 尝试立即停"
+"止 pacemaker 并保持停用状态,或者 \"panic\" 尝试立即重新启动本地节点，并在失败"
+"时返回执行stop。"
 
-#: daemons/fenced/pacemaker-fenced.c:734
-msgid "Deprecated (will be removed in a future release)"
-msgstr "已弃用(将在未来版本中删除)"
+#: lib/common/options.c:117 lib/common/options.c:126 lib/common/options.c:136
+#: lib/common/options.c:145
+#, fuzzy
+msgid "*** Advanced Use Only ***"
+msgstr "*** Advanced Use Only *** pacemaker未使用"
 
-#: daemons/fenced/pacemaker-fenced.c:737
-msgid "Intended for use in regression testing only"
-msgstr "仅适用于回归测试"
+#: lib/common/options.c:118
+msgid ""
+"Declare an election failed if it is not decided within this much time. If "
+"you need to adjust this value, it probably indicates the presence of a bug."
+msgstr ""
+"如果集群在本项设置时间内没有作出决定则宣布选举失败。如果您需要调整该值，这可"
+"能代表存在某些缺陷。"
 
-#: daemons/fenced/pacemaker-fenced.c:740
-msgid "Send logs to the additional named logfile"
-msgstr "将日志发送到其他命名日志文件"
+#: lib/common/options.c:127
+msgid ""
+"Exit immediately if shutdown does not complete within this much time. If you "
+"need to adjust this value, it probably indicates the presence of a bug."
+msgstr ""
+"如果在这段时间内关机仍未完成，则立即退出。如果您需要调整该值，这可能代表存在"
+"某些缺陷。"
 
-#: lib/cib/cib_utils.c:875
-msgid "Enable Access Control Lists (ACLs) for the CIB"
-msgstr "为CIB启用访问控制列表(ACL)"
+#: lib/common/options.c:137 lib/common/options.c:146
+msgid ""
+"If you need to adjust this value, it probably indicates the presence of a "
+"bug."
+msgstr "如果您需要调整该值，这可能代表存在某些缺陷。"
 
-#: lib/cib/cib_utils.c:881
-msgid "Maximum IPC message backlog before disconnecting a cluster daemon"
-msgstr "断开集群守护程序之前的最大IPC消息积压"
+#: lib/common/options.c:153
+msgid ""
+"*** Advanced Use Only *** Enabling this option will slow down cluster "
+"recovery under all conditions"
+msgstr "*** Advanced Use Only *** 启用此选项将在所有情况下减慢集群恢复的速度"
 
-#: lib/cib/cib_utils.c:882
+#: lib/common/options.c:156
 msgid ""
-"Raise this if log has \"Evicting client\" messages for cluster daemon PIDs "
-"(a good value is the number of resources in the cluster multiplied by the "
-"number of nodes)."
+"Delay cluster recovery for this much time to allow for additional events to "
+"occur. Useful if your configuration is sensitive to the order in which ping "
+"updates arrive."
 msgstr ""
-"如果日志中有针对集群守护程序PID的消息“Evicting client”，（则建议将值设为集群"
-"中的资源数量乘以节点数量）"
-
-#: lib/common/options.c:414
-msgid "  Allowed values: "
-msgstr " 允许的值: "
-
-#: lib/common/cmdline.c:70
-msgid "Display software version and exit"
-msgstr "显示软件版本信息"
+"集群恢复将被推迟指定的时间间隔，以等待更多事件发生。如果您的配置对 ping 更新"
+"到达的顺序很敏感，这就很有用"
 
-#: lib/common/cmdline.c:73
-msgid "Increase debug output (may be specified multiple times)"
-msgstr "显示更多调试信息（可多次指定）"
+#: lib/common/options.c:165
+msgid "What to do when the cluster does not have quorum"
+msgstr "当集群没有必需票数时该如何作"
 
-#: lib/common/cmdline.c:92
-msgid "FORMAT"
-msgstr "格式"
+#: lib/common/options.c:172
+msgid "Whether to lock resources to a cleanly shut down node"
+msgstr "是否锁定资源到完全关闭的节点"
 
-#: lib/common/cmdline.c:94
-msgid "Specify file name for output (or \"-\" for stdout)"
-msgstr "指定输出的文件名 或指定'-' 表示标准输出"
+#: lib/common/options.c:173
+msgid ""
+"When true, resources active on a node when it is cleanly shut down are kept "
+"\"locked\" to that node (not allowed to run elsewhere) until they start "
+"again on that node after it rejoins (or for at most shutdown-lock-limit, if "
+"set). Stonith resources and Pacemaker Remote connections are never locked. "
+"Clone and bundle instances and the promoted role of promotable clones are "
+"currently never locked, though support could be added in a future release."
+msgstr ""
+"设置为true时，在完全关闭的节点上活动的资源将被“锁定”到该节点（不允许在其他地"
+"方运行），直到该节点重新加入后资源重新启动（或最长shutdown-lock-limit，如果已"
+"设置）。 Stonith资源和Pacemaker Remote连接永远不会被锁定。 克隆和捆绑实例以及"
+"可升级克隆的主角色目前从未锁定，尽管可以在将来的发行版中添加支持。"
 
-#: lib/common/cmdline.c:94
-msgid "DEST"
-msgstr "目标"
+#: lib/common/options.c:186
+msgid "Do not lock resources to a cleanly shut down node longer than this"
+msgstr "资源会被锁定到完全关闭的节点的最长时间"
 
-#: lib/common/cmdline.c:100
-msgid "Output Options:"
-msgstr "输出选项"
+#: lib/common/options.c:188
+msgid ""
+"If shutdown-lock is true and this is set to a nonzero time duration, "
+"shutdown locks will expire after this much time has passed since the "
+"shutdown was initiated, even if the node has not rejoined."
+msgstr ""
+"如果shutdown-lock为true，并且将此选项设置为非零持续时间，则自从开始shutdown以"
+"来经过了这么长的时间后，shutdown锁将过期，即使该节点尚未重新加入。"
 
-#: lib/common/cmdline.c:100
-msgid "Show output help"
-msgstr "显示输出帮助"
+#: lib/common/options.c:197
+msgid "Enable Access Control Lists (ACLs) for the CIB"
+msgstr "为CIB启用访问控制列表(ACL)"
 
-#: lib/pengine/common.c:46
+#: lib/common/options.c:204
 msgid "Whether resources can run on any node by default"
 msgstr "资源是否默认可以在任何节点上运行"
 
-#: lib/pengine/common.c:52
+#: lib/common/options.c:211
 msgid ""
 "Whether the cluster should refrain from monitoring, starting, and stopping "
 "resources"
 msgstr "集群是否应避免监视，启动和停止资源"
 
-#: lib/pengine/common.c:59
+#: lib/common/options.c:219
 msgid ""
 "Whether a start failure should prevent a resource from being recovered on "
 "the same node"
 msgstr "是否避免在同一节点上重启启动失败的资源"
 
-#: lib/pengine/common.c:61
+#: lib/common/options.c:221
 msgid ""
 "When true, the cluster will immediately ban a resource from a node if it "
 "fails to start there. When false, the cluster will instead check the "
 "resource's fail count against its migration-threshold."
 msgstr ""
 "当为true，如果资源启动失败，集群将立即禁止节点启动该资源，当为false，集群将根"
 "据其迁移阈值来检查资源的失败计数。"
 
-#: lib/pengine/common.c:68
+#: lib/common/options.c:229
 msgid "Whether the cluster should check for active resources during start-up"
 msgstr "集群是否在启动期间检查运行资源"
 
-#: lib/pengine/common.c:99
+#: lib/common/options.c:239
 msgid ""
 "*** Advanced Use Only *** Whether nodes may be fenced as part of recovery"
 msgstr "*** Advanced Use Only *** 节点是否可以被 fence 以作为集群恢复的一部分"
 
-#: lib/pengine/common.c:101
+#: lib/common/options.c:241
 msgid ""
 "If false, unresponsive nodes are immediately assumed to be harmless, and "
 "resources that were active on them may be recovered elsewhere. This can "
 "result in a \"split-brain\" situation, potentially leading to data loss and/"
 "or service unavailability."
 msgstr ""
 "如果为false，则立即假定无响应的节点是无害的，并且可以在其他位置恢复在其上活动"
 "的资源。 这可能会导致 \"split-brain\" 情况，可能导致数据丢失和/或服务不可用。"
 
-#: lib/pengine/common.c:109
+#: lib/common/options.c:250
 msgid ""
 "Action to send to fence device when a node needs to be fenced (\"poweroff\" "
 "is a deprecated alias for \"off\")"
 msgstr "发送到 fence 设备的操作（ \"poweroff\" 是 \"off \"的别名,不建议使用)"
 
-#: lib/pengine/common.c:116
-msgid "*** Advanced Use Only *** Unused by Pacemaker"
-msgstr "*** Advanced Use Only *** pacemaker未使用"
-
-#: lib/pengine/common.c:117
+#: lib/common/options.c:258
 msgid ""
-"This value is not used by Pacemaker, but is kept for backward compatibility, "
-"and certain legacy fence agents might use it."
+"How long to wait for on, off, and reboot fence actions to complete by default"
 msgstr ""
-"Pacemaker不使用此值，但保留此值是为了向后兼容，某些传统的fence 代理可能会使用"
-"它。"
 
-#: lib/pengine/common.c:123
+#: lib/common/options.c:266
 msgid "Whether watchdog integration is enabled"
 msgstr "是否启用watchdog集成设置"
 
-#: lib/pengine/common.c:124
+#: lib/common/options.c:267
 msgid ""
 "This is set automatically by the cluster according to whether SBD is "
 "detected to be in use. User-configured values are ignored. The value `true` "
 "is meaningful if diskless SBD is used and `stonith-watchdog-timeout` is "
 "nonzero. In that case, if fencing is required, watchdog-based self-fencing "
 "will be performed via SBD without requiring a fencing resource explicitly "
 "configured."
 msgstr ""
 "这是由集群检测是否正在使用 SBD 并自动设置。用户配置的值将被忽略。如果使用无"
 "盘 SBD 并且 stonith-watchdog-timeout 不为零时，此选项为 true 才有实际意义。在"
 "这种情况下，无需明确配置fence资源，如果需要fence时，基于watchdog的自我fence会"
 "通过SBD执行。"
 
-#: lib/pengine/common.c:134
+#: lib/common/options.c:288
+#, fuzzy
+msgid ""
+"How long before nodes can be assumed to be safely down when watchdog-based "
+"self-fencing via SBD is in use"
+msgstr ""
+"当基于 watchdog 的自我 fence 机制通过SBD 被执行时，我们可以假设节点安全关闭之"
+"前需要等待多长时间"
+
+#: lib/common/options.c:290
+msgid ""
+"If this is set to a positive value, lost nodes are assumed to self-fence "
+"using watchdog-based SBD within this much time. This does not require a "
+"fencing resource to be explicitly configured, though a fence_watchdog "
+"resource can be configured, to limit use to specific nodes. If this is set "
+"to 0 (the default), the cluster will never assume watchdog-based self-"
+"fencing. If this is set to a negative value, the cluster will use twice the "
+"local value of the `SBD_WATCHDOG_TIMEOUT` environment variable if that is "
+"positive, or otherwise treat this as 0. WARNING: When used, this timeout "
+"must be larger than `SBD_WATCHDOG_TIMEOUT` on all nodes that use watchdog-"
+"based SBD, and Pacemaker will refuse to start on any of those nodes where "
+"this is not true for the local value or SBD is not active. When this is set "
+"to a negative value, `SBD_WATCHDOG_TIMEOUT` must be set to the same value on "
+"all nodes that use SBD, otherwise data corruption or loss could occur."
+msgstr ""
+"如果设置为正值，则假定丢失的节点在这段时间内使用基于watchdog的SBD进行自我防"
+"护。这不需要明确配置fence资源，但可以配置一个fence_watchdog资源，以限制特定节"
+"点的使用。如果设置为0（默认值），集群将永远不会假定基于watchdog的自我防护。如"
+"果设置为负值，且如果`SBD_WATCHDOG_TIMEOUT`环境变量的本地值为正值，则集群将使"
+"用该值的两倍，否则将其视为0。警告：在使用基于watchdog的SBD的所有节点上，此超"
+"时必须大于`SBD_WATCGDOG_TIMEOUT`,如果本地值不是这样，或者SBD未运行，则"
+"Pacemaker将拒绝在任何节点上启动。如果设置为负值，则在使用SBD的所有节点上，"
+"`SBD_WATCHDOG_TIMEOUT`必须设置为相同的值，否则可能会发生数据损坏或丢失。"
+
+#: lib/common/options.c:310
+msgid ""
+"How many times fencing can fail before it will no longer be immediately re-"
+"attempted on a target"
+msgstr "fence操作失败多少次会停止立即尝试"
+
+#: lib/common/options.c:318
 msgid "Allow performing fencing operations in parallel"
 msgstr "允许并行执行 fencing 操作"
 
-#: lib/pengine/common.c:140
+#: lib/common/options.c:325
 msgid "*** Advanced Use Only *** Whether to fence unseen nodes at start-up"
 msgstr "*** 仅高级使用 *** 是否在启动时fence不可见节点"
 
-#: lib/pengine/common.c:141
+#: lib/common/options.c:327
+#, fuzzy
 msgid ""
-"Setting this to false may lead to a \"split-brain\" situation,potentially "
+"Setting this to false may lead to a \"split-brain\" situation, potentially "
 "leading to data loss and/or service unavailability."
 msgstr ""
 "将此设置为 false 可能会导致 \"split-brain\" 的情况，可能导致数据丢失和/或服务"
 "不可用。"
 
-#: lib/pengine/common.c:147
+#: lib/common/options.c:334
 msgid ""
 "Apply fencing delay targeting the lost nodes with the highest total resource "
 "priority"
 msgstr "针对具有最高总资源优先级的丢失节点应用fencing延迟"
 
-#: lib/pengine/common.c:148
+#: lib/common/options.c:336
 msgid ""
 "Apply specified delay for the fencings that are targeting the lost nodes "
 "with the highest total resource priority in case we don't have the majority "
 "of the nodes in our cluster partition, so that the more significant nodes "
 "potentially win any fencing match, which is especially meaningful under "
 "split-brain of 2-node cluster. A promoted resource instance takes the base "
 "priority + 1 on calculation if the base priority is not 0. Any static/random "
 "delays that are introduced by `pcmk_delay_base/max` configured for the "
 "corresponding fencing resources will be added to this delay. This delay "
 "should be significantly greater than, safely twice, the maximum "
 "`pcmk_delay_base/max`. By default, priority fencing delay is disabled."
 msgstr ""
 "如果我们所在的集群分区并不拥有大多数集群节点，则针对丢失节点的fence操作应用指"
 "定的延迟，这样更重要的节点就能够赢得fence竞赛。这对于双节点集群在split-brain"
 "状况下尤其有意义。如果基本优先级不为0，在计算时主资源实例获得基本优先级+1。任"
 "何对于相应的 fence 资源由 pcmk_delay_base/max 配置所引入的静态/随机延迟会被添"
 "加到此延迟。为了安全, 这个延迟应该明显大于 pcmk_delay_base/max 的最大设置值，"
 "例如两倍。默认情况下，优先级fencing延迟已禁用。"
 
-#: lib/pengine/common.c:175
+#: lib/common/options.c:353
+msgid ""
+"How long to wait for a node that has joined the cluster to join the "
+"controller process group"
+msgstr "等待已加入集群的节点加入控制器进程组的时间"
+
+#: lib/common/options.c:355
+msgid ""
+"Fence nodes that do not join the controller process group within this much "
+"time after joining the cluster, to allow the cluster to continue managing "
+"resources. A value of 0 means never fence pending nodes. Setting the value "
+"to 2h means fence nodes after 2 hours."
+msgstr ""
+"如果节点加入集群后在此时间内不加入控制器进程组，Fence该节点，以便群集继续管理"
+"资源。值为0表示永远不 fence 待定节点。将值设置为2h表示2小时后 fence 待定节"
+"点。"
+
+#: lib/common/options.c:365
 msgid "Maximum time for node-to-node communication"
 msgstr "最大节点间通信时间"
 
-#: lib/pengine/common.c:176
+#: lib/common/options.c:366
 msgid ""
 "The node elected Designated Controller (DC) will consider an action failed "
 "if it does not get a response from the node executing the action within this "
 "time (after considering the action's own timeout). The \"correct\" value "
 "will depend on the speed and load of your network and cluster nodes."
 msgstr ""
 "如果一个操作未在该时间内（并且考虑操作本身的超时时长）从执行该操作的节点获得"
 "响应，则会被选为指定控制器（DC）的节点认定为失败。\"正确\" 值将取决于速度和您"
 "的网络和集群节点的负载。"
 
-#: lib/pengine/common.c:185
+#: lib/common/options.c:378
+msgid "Maximum amount of system load that should be used by cluster nodes"
+msgstr "集群节点应该使用的最大系统负载量"
+
+#: lib/common/options.c:380
+msgid ""
+"The cluster will slow down its recovery process when the amount of system "
+"resources used (currently CPU) approaches this limit"
+msgstr "当使用的系统资源量（当前为CPU）接近此限制时，集群将减慢其恢复过程"
+
+#: lib/common/options.c:387
+msgid ""
+"Maximum number of jobs that can be scheduled per node (defaults to 2x cores)"
+msgstr "每个节点可以调度的最大作业数（默认为2x内核数）"
+
+#: lib/common/options.c:395
 #, fuzzy
 msgid ""
 "Maximum number of jobs that the cluster may execute in parallel across all "
 "nodes"
 msgstr "集群可以在所有节点上并发执行的最大作业数"
 
-#: lib/pengine/common.c:187
+#: lib/common/options.c:397
 msgid ""
 "The \"correct\" value will depend on the speed and load of your network and "
 "cluster nodes. If set to 0, the cluster will impose a dynamically calculated "
 "limit when any node has a high load."
 msgstr ""
 "\"正确\" 值将取决于速度和您的网络与集群节点的负载。如果设置为0，当任何节点具"
 "有高负载时，集群将施加一个动态计算的限制。"
 
-#: lib/pengine/common.c:195
+#: lib/common/options.c:406
 msgid ""
 "The number of live migration actions that the cluster is allowed to execute "
 "in parallel on a node (-1 means no limit)"
 msgstr "允许集群在一个节点上并行执行的实时迁移操作的数量(-1表示没有限制)"
 
-#: lib/pengine/common.c:203
+#: lib/common/options.c:414
+msgid "Maximum IPC message backlog before disconnecting a cluster daemon"
+msgstr "断开集群守护程序之前的最大IPC消息积压"
+
+#: lib/common/options.c:415
+msgid ""
+"Raise this if log has \"Evicting client\" messages for cluster daemon PIDs "
+"(a good value is the number of resources in the cluster multiplied by the "
+"number of nodes)."
+msgstr ""
+"如果日志中有针对集群守护程序PID的消息“Evicting client”，（则建议将值设为集群"
+"中的资源数量乘以节点数量）"
+
+#: lib/common/options.c:425
 #, fuzzy
 msgid "Whether the cluster should stop all active resources"
 msgstr "集群是否在启动期间检查运行资源"
 
-#: lib/pengine/common.c:209
+#: lib/common/options.c:432
 msgid "Whether to stop resources that were removed from the configuration"
 msgstr "是否停止配置已被删除的资源"
 
-#: lib/pengine/common.c:215
+#: lib/common/options.c:440
 msgid "Whether to cancel recurring actions removed from the configuration"
 msgstr "是否取消配置已被删除的的重复操作"
 
-#: lib/pengine/common.c:221
+#: lib/common/options.c:448
 msgid ""
 "*** Deprecated *** Whether to remove stopped resources from the executor"
 msgstr "***不推荐***是否从pacemaker-execd 守护进程中清除已停止的资源"
 
-#: lib/pengine/common.c:223
+#: lib/common/options.c:450
 msgid ""
 "Values other than default are poorly tested and potentially dangerous. This "
 "option will be removed in a future release."
 msgstr "非默认值未经过充分的测试，有潜在的风险。该选项将在未来的版本中删除。"
 
-#: lib/pengine/common.c:231
+#: lib/common/options.c:459
 msgid "The number of scheduler inputs resulting in errors to save"
 msgstr "保存导致错误的调度程序输入的数量"
 
-#: lib/pengine/common.c:232 lib/pengine/common.c:238 lib/pengine/common.c:244
+#: lib/common/options.c:460 lib/common/options.c:467 lib/common/options.c:474
 msgid "Zero to disable, -1 to store unlimited."
 msgstr "零表示禁用，-1表示存储不受限制。"
 
-#: lib/pengine/common.c:237
+#: lib/common/options.c:466
 msgid "The number of scheduler inputs resulting in warnings to save"
 msgstr "保存导致警告的调度程序输入的数量"
 
-#: lib/pengine/common.c:243
+#: lib/common/options.c:473
 msgid "The number of scheduler inputs without errors or warnings to save"
 msgstr "保存没有错误或警告的调度程序输入的数量"
 
-#: lib/pengine/common.c:254
+#: lib/common/options.c:485
 #, fuzzy
 msgid "How cluster should react to node health attributes"
 msgstr "集群节点对节点健康属性如何反应"
 
-#: lib/pengine/common.c:255
+#: lib/common/options.c:486
 msgid ""
 "Requires external entities to create node attributes (named with the prefix "
 "\"#health\") with values \"red\", \"yellow\", or \"green\"."
 msgstr ""
 "需要外部实体创建具有“red”,“yellow”或“green”值的节点属性(前缀为“#health”)"
 
-#: lib/pengine/common.c:262
+#: lib/common/options.c:494
 msgid "Base health score assigned to a node"
 msgstr "分配给节点的基本健康分数"
 
-#: lib/pengine/common.c:263
+#: lib/common/options.c:495
 msgid "Only used when \"node-health-strategy\" is set to \"progressive\"."
 msgstr "仅在“node-health-strategy”设置为“progressive”时使用。"
 
-#: lib/pengine/common.c:268
+#: lib/common/options.c:502
 msgid "The score to use for a node health attribute whose value is \"green\""
 msgstr "为节点健康属性值为“green”所使用的分数"
 
-#: lib/pengine/common.c:269 lib/pengine/common.c:275 lib/pengine/common.c:281
+#: lib/common/options.c:504 lib/common/options.c:513 lib/common/options.c:522
 msgid ""
-"Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive"
-"\"."
+"Only used when \"node-health-strategy\" is set to \"custom\" or "
+"\"progressive\"."
 msgstr "仅在“node-health-strategy”设置为“custom”或“progressive”时使用。"
 
-#: lib/pengine/common.c:274
+#: lib/common/options.c:511
 msgid "The score to use for a node health attribute whose value is \"yellow\""
 msgstr "为节点健康属性值为“yellow”所使用的分数"
 
-#: lib/pengine/common.c:280
+#: lib/common/options.c:520
 msgid "The score to use for a node health attribute whose value is \"red\""
 msgstr "为节点健康属性值为“red”所使用的分数"
 
-#: lib/pengine/common.c:289
+#: lib/common/options.c:532
 #, fuzzy
 msgid "How the cluster should allocate resources to nodes"
 msgstr "集群应该如何分配资源到节点"
 
+#: lib/common/options.c:995
+msgid "  Allowed values: "
+msgstr " 允许的值: "
+
+#: lib/common/cmdline.c:70
+msgid "Display software version and exit"
+msgstr "显示软件版本信息"
+
+#: lib/common/cmdline.c:73
+msgid "Increase debug output (may be specified multiple times)"
+msgstr "显示更多调试信息（可多次指定）"
+
+#: lib/common/cmdline.c:92
+msgid "FORMAT"
+msgstr "格式"
+
+#: lib/common/cmdline.c:94
+msgid "Specify file name for output (or \"-\" for stdout)"
+msgstr "指定输出的文件名 或指定'-' 表示标准输出"
+
+#: lib/common/cmdline.c:94
+msgid "DEST"
+msgstr "目标"
+
+#: lib/common/cmdline.c:100
+msgid "Output Options:"
+msgstr "输出选项"
+
+#: lib/common/cmdline.c:100
+msgid "Show output help"
+msgstr "显示输出帮助"
+
 #: tools/crm_resource.c:258
 #, c-format
 msgid "Aborting because no messages received in %d seconds"
 msgstr "中止，因为在%d秒内没有接收到消息"
 
 #: tools/crm_resource.c:921
 #, c-format
 msgid "Invalid check level setting: %s"
 msgstr "无效的检查级别设置：%s"
 
 #: tools/crm_resource.c:1008
 #, c-format
 msgid ""
 "Resource '%s' not moved: active in %d locations (promoted in %d).\n"
 "To prevent '%s' from running on a specific location, specify a node.To "
 "prevent '%s' from being promoted at a specific location, specify a node and "
 "the --promoted option."
 msgstr ""
 "资源'%s'未移动：在%d个位置运行（其中在%d个位置为主实例）\n"
 "若要阻止'%s'在特定位置运行，请指定一个节点。若要防止'%s'在指定位置升级，指定"
 "一个节点并使用--promoted选项"
 
 #: tools/crm_resource.c:1019
 #, c-format
 msgid ""
 "Resource '%s' not moved: active in %d locations.\n"
 "To prevent '%s' from running on a specific location, specify a node."
 msgstr ""
 "资源%s未移动:在%d个位置运行\n"
 "若要防止'%s'运行在特定位置，指定一个节点"
 
 #: tools/crm_resource.c:1096
 #, c-format
 msgid "Could not get modified CIB: %s\n"
 msgstr "无法获得修改的CIB：%s\n"
 
 #: tools/crm_resource.c:1174
 #, c-format
 msgid "No cluster connection to Pacemaker Remote node %s detected"
 msgstr "未检测到至pacemaker远程节点%s的集群连接"
 
 #: tools/crm_resource.c:1235
 msgid "Must specify -t with resource type"
 msgstr "需要使用-t指定资源类型"
 
 #: tools/crm_resource.c:1241
 msgid "Must supply -v with new value"
 msgstr "必须使用-v指定新值"
 
 #: tools/crm_resource.c:1273
 msgid "Could not create executor connection"
 msgstr "无法创建到pacemaker-execd守护进程的连接"
 
 #: tools/crm_resource.c:1298
 #, fuzzy, c-format
 msgid "Metadata query for %s failed: %s"
 msgstr "，查询%s的元数据失败: %s\n"
 
 #: tools/crm_resource.c:1304
 #, c-format
 msgid "'%s' is not a valid agent specification"
 msgstr "'%s' 是一个无效的代理"
 
 #: tools/crm_resource.c:1317
 msgid "--resource cannot be used with --class, --agent, and --provider"
 msgstr "--resource 不能与 --class, --agent, --provider一起使用"
 
 #: tools/crm_resource.c:1322
 msgid ""
 "--class, --agent, and --provider can only be used with --validate and --"
 "force-*"
 msgstr "--class, --agent和--provider只能被用于--validate和--force-*"
 
 #: tools/crm_resource.c:1331
 msgid "stonith does not support providers"
 msgstr "stonith 不支持提供者"
 
 #: tools/crm_resource.c:1335
 #, c-format
 msgid "%s is not a known stonith agent"
 msgstr "%s 不是一个已知stonith代理"
 
 #: tools/crm_resource.c:1340
 #, c-format
 msgid "%s:%s:%s is not a known resource"
 msgstr "%s:%s:%s 不是一个已知资源"
 
 #: tools/crm_resource.c:1454
 #, c-format
 msgid "Error creating output format %s: %s"
 msgstr "创建输出格式错误 %s:%s"
 
 #: tools/crm_resource.c:1481
 msgid "--expired requires --clear or -U"
 msgstr "--expired需要和--clear或-U一起使用"
 
 #: tools/crm_resource.c:1498
 #, c-format
 msgid "Error parsing '%s' as a name=value pair"
 msgstr "'%s'解析错误，格式为name=value"
 
 #: tools/crm_resource.c:1595
 msgid "Must supply a resource id with -r"
 msgstr "必须使用-r指定资源id"
 
 #: tools/crm_resource.c:1601
 msgid "Must supply a node name with -N"
 msgstr "必须使用-N指定节点名称"
 
 #: tools/crm_resource.c:1619
 msgid "Could not create CIB connection"
 msgstr "无法创建到CIB的连接"
 
 #: tools/crm_resource.c:1627
 #, c-format
 msgid "Could not connect to the CIB: %s"
 msgstr "不能连接到CIB：%s"
 
 #: tools/crm_resource.c:1648
 #, c-format
 msgid "Resource '%s' not found"
 msgstr "没有发现'%s'资源"
 
 #: tools/crm_resource.c:1660
 #, c-format
 msgid "Cannot operate on clone resource instance '%s'"
 msgstr "不能操作克隆资源实例'%s'"
 
 #: tools/crm_resource.c:1672
 #, c-format
 msgid "Node '%s' not found"
 msgstr "没有发现%s节点"
 
 #: tools/crm_resource.c:1683
 #, c-format
 msgid "Error connecting to the controller: %s"
 msgstr "连接到控制器错误：%s"
 
 #: tools/crm_resource.c:1692
 #, fuzzy, c-format
 msgid "Error connecting to %s: %s"
 msgstr "连接到控制器错误：%s"
 
-#: tools/crm_resource.c:1950
+#: tools/crm_resource.c:1952
 msgid "You need to supply a value with the -v option"
 msgstr "需要使用-v选项提供一个值"
 
-#: tools/crm_resource.c:2006
+#: tools/crm_resource.c:2008
 msgid "You need to specify a resource type with -t"
 msgstr "需要使用-t指定资源类型"
 
-#: tools/crm_resource.c:2013
+#: tools/crm_resource.c:2015
 #, fuzzy, c-format
 msgid "Could not delete resource %s: %s"
 msgstr "无法删除资源：%s：%s"
 
-#: tools/crm_resource.c:2023
+#: tools/crm_resource.c:2025
 #, c-format
 msgid "Unimplemented command: %d"
 msgstr "无效的命令：%d"
 
-#: tools/crm_resource.c:2053
+#: tools/crm_resource.c:2055
 #, c-format
 msgid "Error performing operation: %s"
 msgstr "执行操作错误：%s"
 
+#~ msgid ""
+#~ "This value is not used by Pacemaker, but is kept for backward "
+#~ "compatibility, and certain legacy fence agents might use it."
+#~ msgstr ""
+#~ "Pacemaker不使用此值，但保留此值是为了向后兼容，某些传统的fence 代理可能会"
+#~ "使用它。"
+
 #~ msgid "No agents found for standard '%s'"
 #~ msgstr "没有发现指定的'%s'标准代理"
 
 #, fuzzy
 #~ msgid "No agents found for standard '%s' and provider '%s'"
 #~ msgstr "没有发现指定的标准%s和提供者%S的资源代理"
 
 #~ msgid "No %s found for %s"
 #~ msgstr "没有发现%s符合%s"
 
 #~ msgid "No %s found"
 #~ msgstr "没有发现%s"
 
 #~ msgid ""
 #~ "If nonzero, along with `have-watchdog=true` automatically set by the "
 #~ "cluster, when fencing is required, watchdog-based self-fencing will be "
 #~ "performed via SBD without requiring a fencing resource explicitly "
 #~ "configured. If `stonith-watchdog-timeout` is set to a positive value, "
 #~ "unseen nodes are assumed to self-fence within this much time. +WARNING:+ "
 #~ "It must be ensured that this value is larger than the "
 #~ "`SBD_WATCHDOG_TIMEOUT` environment variable on all nodes. Pacemaker "
 #~ "verifies the settings individually on all nodes and prevents startup or "
 #~ "shuts down if configured wrongly on the fly. It's strongly recommended "
 #~ "that `SBD_WATCHDOG_TIMEOUT` is set to the same value on all nodes. If "
 #~ "`stonith-watchdog-timeout` is set to a negative value, and "
 #~ "`SBD_WATCHDOG_TIMEOUT` is set, twice that value will be used. +WARNING:+ "
 #~ "In this case, it's essential (currently not verified by Pacemaker) that "
 #~ "`SBD_WATCHDOG_TIMEOUT` is set to the same value on all nodes."
 #~ msgstr ""
 #~ "如果值非零，且集群设置了 `have-watchdog=true` ，当需要 fence 操作时，基于 "
 #~ "watchdog 的自我 fence 机制将通过SBD执行，而不需要显式配置 fence 资源。如"
 #~ "果 `stonith-watchdog-timeout` 被设为正值，则假定不可见的节点在这段时间内自"
 #~ "我fence。 +WARNING:+ 必须确保该值大于所有节点上的`SBD_WATCHDOG_TIMEOUT` 环"
 #~ "境变量。Pacemaker将在所有节点上单独验证设置，如发现有错误的动态配置，将防"
 #~ "止节点启动或关闭。强烈建议在所有节点上将 `SBD_WATCHDOG_TIMEOUT` 设置为相同"
 #~ "的值。如果 `stonith-watchdog-timeout` 设置为负值。并且设置了 "
 #~ "`SBD_WATCHDOG_TIMEOUT` ，则将使用该值的两倍， +WARNING:+ 在这种情况下，必"
 #~ "须将所有节点上 `SBD_WATCHDOG_TIMEOUT` 设置为相同的值(目前没有通过pacemaker"
 #~ "验证)。"