diff --git a/doc/Pacemaker_Remote/en-US/Ch-Options.txt b/doc/Pacemaker_Remote/en-US/Ch-Options.txt
index 17e8a34faf..9e14b310c4 100644
--- a/doc/Pacemaker_Remote/en-US/Ch-Options.txt
+++ b/doc/Pacemaker_Remote/en-US/Ch-Options.txt
@@ -1,51 +1,51 @@
 = Configuration Explained =
 
 The walk-through examples use some of these options, but don't explain exactly what they mean or do.  This section is meant to be the go-to resource for all the options available for configuring remote-nodes.
 
 == Resource Options ==
 
 When configuring a virtual machine or lxc resource to act as a remote-node, these are the metadata options available to both enable the resource as a remote-node and define the connection parameters.
 
-.Metadata Options for configurint KVM/LXC resources as remote-nodes
+.Metadata Options for configuring KVM/LXC resources as remote-nodes
 [width="95%",cols="1m,1,4<",options="header",align="center"]
 |=========================================================
 
 |Option
 |Default
 |Description
 
 |+remote-node+
 |<none>
 |The name of the remote-node this resource defines.  This both enables the resource as a remote-node and defines the unique name used to identify the remote-node. If no other parameters are set, this value will also be assumed as the hostname to connect to at port 3121. +WARNING+ This value cannot overlap with any resource or node IDs.
 
 |+remote-port+
 |3121
 |Configure a custom port to use for the guest connection to pacemaker_remote.
 
 |+remote-addr+
 |+remote-node+ value used as hostname
 |The ip address or hostname to connect to if remote-node's name is not the hostname of the guest.
 
 |+remote-connect-timeout+
 |60s
 |How long before a pending guest connection will time out.
 
 |=========================================================
 
 == Host and Guest Authentication ==
 
 Authentication and encryption of the connection between cluster-nodes (pacemaker) to remote-nodes (pacemaker_remote) is achieved using TLS with PSK encryption/authentication on +tcp port 3121+.  This means both the cluster-node and remote-node must share the same private key.   By default this +key must be placed at "/etc/pacemaker/authkey" on both cluster-nodes and remote-nodes+.
 
 == Pacemaker and pacemaker_remote Options ==
 
 If you need to change the default port or authkey location for either pacemaker or pacemaker_remote, there are environment variables you can set that affect both of those daemons. These environment variables can be enabled by placing them in the /etc/sysconfig/pacemaker file.
 [source,C]
 ----
 #==#==# Pacemaker Remote
 # Use a custom directory for finding the authkey.
 PCMK_authkey_location=/etc/pacemaker/authkey
 #
 # Specify a custom port for Pacemaker Remote connections
 PCMK_remote_port=3121
 ----