diff --git a/doc/sphinx/Pacemaker_Explained/local-options.rst b/doc/sphinx/Pacemaker_Explained/local-options.rst index 8c32990a54..d7c9742a08 100644 --- a/doc/sphinx/Pacemaker_Explained/local-options.rst +++ b/doc/sphinx/Pacemaker_Explained/local-options.rst @@ -1,709 +1,709 @@ Host-Local Configuration ------------------------ .. index:: pair: XML element; configuration .. note:: Directory and file paths below may differ on your system depending on your Pacemaker build settings. Check your Pacemaker configuration file to find the correct paths. Configuration Value Types ######################### Throughout this document, configuration values will be designated as having one of the following types: .. list-table:: **Configuration Value Types** :class: longtable :widths: 1 3 :header-rows: 1 * - Type - Description * - .. _boolean: .. index:: pair: type; boolean boolean - Case-insensitive text value where ``1``, ``yes``, ``y``, ``on``, and ``true`` evaluate as true and ``0``, ``no``, ``n``, ``off``, ``false``, and unset evaluate as false * - .. _date_time: .. index:: pair: type; date/time date/time - Textual timestamp like ``Sat Dec 21 11:47:45 2013`` * - .. _duration: .. index:: pair: type; duration duration - A time duration, specified either like a :ref:`timeout ` or an `ISO 8601 duration `_. A duration may be up to approximately 49 days but is intended for much smaller time periods. * - .. _enumeration: .. index:: pair: type; enumeration enumeration - Text that must be one of a set of defined values (which will be listed in the description) * - .. _integer: .. index:: pair: type; integer integer - 32-bit signed integer value (-2,147,483,648 to 2,147,483,647) * - .. _nonnegative_integer: .. index:: pair: type; nonnegative integer nonnegative integer - 32-bit nonnegative integer value (0 to 2,147,483,647) * - .. _port: .. index:: pair: type; port port - Integer TCP port number (0 to 65535) * - .. _score: .. index:: pair: type; score score - A Pacemaker score can be an integer between -1,000,000 and 1,000,000, or a string alias: ``INFINITY`` or ``+INFINITY`` is equivalent to 1,000,000, ``-INFINITY`` is equivalent to -1,000,000, and ``red``, ``yellow``, and ``green`` are equivalent to integers as described in :ref:`node-health`. * - .. _text: .. index:: pair: type; text text - A text string * - .. _timeout: .. index:: pair: type; timeout timeout - A time duration, specified as a bare number (in which case it is considered to be in seconds) or a number with a unit (``ms`` or ``msec`` for milliseconds, ``us`` or ``usec`` for microseconds, ``s`` or ``sec`` for seconds, ``m`` or ``min`` for minutes, ``h`` or ``hr`` for hours) optionally with whitespace before and/or after the number. * - .. _version: .. index:: pair: type; version version - Version number (any combination of alphanumeric characters, dots, and dashes, starting with a number). Scores ______ Scores are integral to how Pacemaker works. Practically everything from moving a resource to deciding which resource to stop in a degraded cluster is achieved by manipulating scores in some way. Scores are calculated per resource and node. Any node with a negative score for a resource can't run that resource. The cluster places a resource on the node with the highest score for it. Score addition and subtraction follow these rules: * Any value (including ``INFINITY``) - ``INFINITY`` = ``-INFINITY`` * ``INFINITY`` + any value other than ``-INFINITY`` = ``INFINITY`` .. note:: What if you want to use a score higher than 1,000,000? Typically this possibility arises when someone wants to base the score on some external metric that might go above 1,000,000. The short answer is you can't. The long answer is it is sometimes possible work around this limitation creatively. You may be able to set the score to some computed value based on the external metric rather than use the metric directly. For nodes, you can store the metric as a node attribute, and query the attribute when computing the score (possibly as part of a custom resource agent). Local Options ############# Pacemaker supports several host-local configuration options. These options can be configured on each node in the main Pacemaker configuration file (|PCMK_CONFIG_FILE|) in the format ``=""``. They work by setting environment variables when Pacemaker daemons start up. .. list-table:: **Local Options** :class: longtable :widths: 2 2 2 5 :header-rows: 1 * - Name - Type - Default - Description * - .. _cib_pam_service: .. index:: pair: node option; CIB_pam_service CIB_pam_service - :ref:`text ` - login - PAM service to use for remote CIB client authentication (passed to ``pam_start``). * - .. _pcmk_logfacility: .. index:: pair: node option; PCMK_logfacility PCMK_logfacility - :ref:`enumeration ` - daemon - Enable logging via the system log or journal, using the specified log facility. Messages sent here are of value to all Pacemaker administrators. This can be disabled using ``none``, but that is not recommended. Allowed values: * ``none`` * ``daemon`` * ``user`` * ``local0`` * ``local1`` * ``local2`` * ``local3`` * ``local4`` * ``local5`` * ``local6`` * ``local7`` * - .. _pcmk_logpriority: .. index:: - pair:: node option; PCMK_logpriority + pair: node option; PCMK_logpriority PCMK_logpriority - :ref:`enumeration ` - notice - Unless system logging is disabled using ``PCMK_logfacility=none``, messages of the specified log severity and higher will be sent to the system log. The default is appropriate for most installations. Allowed values: * ``emerg`` * ``alert`` * ``crit`` * ``error`` * ``warning`` * ``notice`` * ``info`` * ``debug`` * - .. _pcmk_logfile: .. index:: - pair:: node option; PCMK_logfile + pair: node option; PCMK_logfile PCMK_logfile - :ref:`text ` - |PCMK_LOG_FILE| - Unless set to ``none``, more detailed log messages will be sent to the specified file (in addition to the system log, if enabled). These messages may have extended information, and will include messages of info severity. This log is of more use to developers and advanced system administrators, and when reporting problems. Note: The default is |PCMK_CONTAINER_LOG_FILE| (inside the container) for bundled container nodes; this would typically be mapped to a different path on the host running the container. * - .. _pcmk_logfile_mode: .. index:: - pair:: node option; PCMK_logfile_mode + pair: node option; PCMK_logfile_mode PCMK_logfile_mode - :ref:`text ` - 0660 - Pacemaker will set the permissions on the detail log to this value (see ``chmod(1)``). * - .. _pcmk_debug: .. index:: - pair:: node option; PCMK_debug + pair: node option; PCMK_debug PCMK_debug - :ref:`enumeration ` - no - Whether to send debug severity messages to the detail log. This may be set for all subsystems (``yes`` or ``no``) or for specific (comma- separated) subsystems. Allowed subsystems are: * ``pacemakerd`` * ``pacemaker-attrd`` * ``pacemaker-based`` * ``pacemaker-controld`` * ``pacemaker-execd`` * ``pacemaker-fenced`` * ``pacemaker-schedulerd`` Example: ``PCMK_debug="pacemakerd,pacemaker-execd"`` * - .. _pcmk_stderr: .. index:: - pair:: node option; PCMK_stderr + pair: node option; PCMK_stderr PCMK_stderr - :ref:`boolean ` - no - *Advanced Use Only:* Whether to send daemon log messages to stderr. This would be useful only during troubleshooting, when starting Pacemaker manually on the command line. Setting this option in the configuration file is pointless, since the file is not read when starting Pacemaker manually. However, it can be set directly as an environment variable on the command line. * - .. _pcmk_trace_functions: .. index:: - pair:: node option; PCMK_trace_functions + pair: node option; PCMK_trace_functions PCMK_trace_functions - :ref:`text ` - - *Advanced Use Only:* Send debug and trace severity messages from these (comma-separated) source code functions to the detail log. Example: ``PCMK_trace_functions="func1,func2"`` * - .. _pcmk_trace_files: .. index:: - pair:: node option; PCMK_trace_files + pair: node option; PCMK_trace_files PCMK_trace_files - :ref:`text ` - - *Advanced Use Only:* Send debug and trace severity messages from all functions in these (comma-separated) source file names to the detail log. Example: ``PCMK_trace_files="file1.c,file2.c"`` * - .. _pcmk_trace_formats: .. index:: - pair:: node option; PCMK_trace_formats + pair: node option; PCMK_trace_formats PCMK_trace_formats - :ref:`text ` - - *Advanced Use Only:* Send trace severity messages that are generated by these (comma-separated) format strings in the source code to the detail log. Example: ``PCMK_trace_formats="Error: %s (%d)"`` * - .. _pcmk_trace_tags: .. index:: - pair:: node option; PCMK_trace_tags + pair: node option; PCMK_trace_tags PCMK_trace_tags - :ref:`text ` - - *Advanced Use Only:* Send debug and trace severity messages related to these (comma-separated) resource IDs to the detail log. Example: ``PCMK_trace_tags="client-ip,dbfs"`` * - .. _pcmk_blackbox: .. index:: - pair:: node option; PCMK_blackbox + pair: node option; PCMK_blackbox PCMK_blackbox - :ref:`enumeration ` - no - *Advanced Use Only:* Enable blackbox logging globally (``yes`` or ``no``) or by subsystem. A blackbox contains a rolling buffer of all logs (of all severities). Blackboxes are stored under |CRM_BLACKBOX_DIR| by default, by default, and their contents can be viewed using the ``qb-blackbox(8)`` command. The blackbox recorder can be enabled at start using this variable, or at runtime by sending a Pacemaker subsystem daemon process a ``SIGUSR1`` or ``SIGTRAP`` signal, and disabled by sending ``SIGUSR2`` (see ``kill(1)``). The blackbox will be written after a crash, assertion failure, or ``SIGTRAP`` signal. See :ref:`PCMK_debug ` for allowed subsystems. Example: ``PCMK_blackbox="pacemakerd,pacemaker-execd"`` * - .. _pcmk_trace_blackbox: .. index:: - pair:: node option; PCMK_trace_blackbox + pair: node option; PCMK_trace_blackbox PCMK_trace_blackbox - :ref:`enumeration ` - - *Advanced Use Only:* Write a blackbox whenever the message at the specified function and line is logged. Multiple entries may be comma- separated. Example: ``PCMK_trace_blackbox="remote.c:144,remote.c:149"`` * - .. _pcmk_node_start_state: .. index:: - pair:: node option; PCMK_node_start_state + pair: node option; PCMK_node_start_state PCMK_node_start_state - :ref:`enumeration ` - default - By default, the local host will join the cluster in an online or standby state when Pacemaker first starts depending on whether it was previously put into standby mode. If this variable is set to ``standby`` or ``online``, it will force the local host to join in the specified state. * - .. _pcmk_node_action_limit: .. index:: - pair:: node option; PCMK_node_action_limit + pair: node option; PCMK_node_action_limit PCMK_node_action_limit - :ref:`nonnegative integer ` - - Specify the maximum number of jobs that can be scheduled on this node. If set, this overrides the ``node-action-limit`` cluster property for this node. * - .. _pcmk_shutdown_delay: .. index:: - pair:: node option; PCMK_shutdown_delay + pair: node option; PCMK_shutdown_delay PCMK_shutdown_delay - :ref:`timeout ` - - Specify a delay before shutting down ``pacemakerd`` after shutting down all other Pacemaker daemons. * - .. _pcmk_fail_fast: .. index:: - pair:: node option; PCMK_fail_fast + pair: node option; PCMK_fail_fast PCMK_fail_fast - :ref:`boolean ` - no - By default, if a Pacemaker subsystem crashes, the main ``pacemakerd`` process will attempt to restart it. If this variable is set to ``yes``, ``pacemakerd`` will panic the local host instead. * - .. _pcmk_panic_action: .. index:: - pair:: node option; PCMK_panic_action + pair: node option; PCMK_panic_action PCMK_panic_action - :ref:`enumeration ` - reboot - Pacemaker will panic the local host under certain conditions. By default, this means rebooting the host. This variable can change that behavior: if ``crash``, trigger a kernel crash (useful if you want a kernel dump to investigate); if ``sync-reboot`` or ``sync-crash``, synchronize filesystems before rebooting the host or triggering a kernel crash. The sync values are more likely to preserve log messages, but with the risk that the host may be left active if the synchronization hangs. * - .. _pcmk_authkey_location: .. index:: - pair:: node option; PCMK_authkey_location + pair: node option; PCMK_authkey_location PCMK_authkey_location - :ref:`text ` - |PCMK_AUTHKEY_FILE| - Use the contents of this file as the authorization key to use with Pacemaker Remote connections. This file must be readable by Pacemaker daemons (that is, it must allow read permissions to either the |CRM_DAEMON_USER| user or the |CRM_DAEMON_GROUP| group), and its contents must be identical on all nodes. * - .. _pcmk_remote_address: .. index:: - pair:: node option; PCMK_remote_address + pair: node option; PCMK_remote_address PCMK_remote_address - :ref:`text ` - - By default, if the Pacemaker Remote service is run on the local node, it will listen for connections on all IP addresses. This may be set to one address to listen on instead, as a resolvable hostname or as a numeric IPv4 or IPv6 address. When resolving names or listening on all addresses, IPv6 will be preferred if available. When listening on an IPv6 address, IPv4 clients will be supported via IPv4-mapped IPv6 addresses. Example: ``PCMK_remote_address="192.0.2.1"`` * - .. _pcmk_remote_port: .. index:: - pair:: node option; PCMK_remote_port + pair: node option; PCMK_remote_port PCMK_remote_port - :ref:`port ` - 3121 - Use this TCP port number for Pacemaker Remote node connections. This value must be the same on all nodes. * - .. _pcmk_remote_pid1: .. index:: - pair:: node option; PCMK_remote_pid1 + pair: node option; PCMK_remote_pid1 PCMK_remote_pid1 - :ref:`enumeration ` - default - *Advanced Use Only:* When a bundle resource's ``run-command`` option is left to default, Pacemaker Remote runs as PID 1 in the bundle's containers. When it does so, it loads environment variables from the container's |PCMK_INIT_ENV_FILE| and performs the PID 1 responsibility of reaping dead subprocesses. This option controls whether those actions are performed when Pacemaker Remote is not running as PID 1. It is intended primarily for developer testing but can be useful when ``run-command`` is set to a separate, custom PID 1 process that launches Pacemaker Remote. * ``full``: Pacemaker Remote loads environment variables from |PCMK_INIT_ENV_FILE| and reaps dead subprocesses. * ``vars``: Pacemaker Remote loads environment variables from |PCMK_INIT_ENV_FILE| but does not reap dead subprocesses. * ``default``: Pacemaker Remote performs neither action. If Pacemaker Remote is running as PID 1, this option is ignored, and the behavior is the same as for ``full``. * - .. _pcmk_tls_priorities: .. index:: - pair:: node option; PCMK_tls_priorities + pair: node option; PCMK_tls_priorities PCMK_tls_priorities - :ref:`text ` - |PCMK_GNUTLS_PRIORITIES| - *Advanced Use Only:* These GnuTLS cipher priorities will be used for TLS connections (whether for Pacemaker Remote connections or remote CIB access, when enabled). See: https://gnutls.org/manual/html_node/Priority-Strings.html Pacemaker will append ``":+ANON-DH"`` for remote CIB access and ``":+DHE-PSK:+PSK"`` for Pacemaker Remote connections, as they are required for the respective functionality. Example: ``PCMK_tls_priorities="SECURE128:+SECURE192"`` * - .. _pcmk_dh_min_bits: .. index:: - pair:: node option; PCMK_dh_min_bits + pair: node option; PCMK_dh_min_bits PCMK_dh_min_bits - :ref:`nonnegative integer ` - 0 (no minimum) - *Advanced Use Only:* Set a lower bound on the bit length of the prime number generated for Diffie-Hellman parameters needed by TLS connections. The default is no minimum. The server (Pacemaker Remote daemon, or CIB manager configured to accept remote clients) will use this value to provide a floor for the value recommended by the GnuTLS library. The library will only accept a limited number of specific values, which vary by library version, so setting these is recommended only when required for compatibility with specific client versions. Clients (connecting cluster nodes or remote CIB commands) will require that the server use a prime of at least this size. This is recommended only when the value must be lowered in order for the client's GnuTLS library to accept a connection to an older server. * - .. _pcmk_dh_max_bits: .. index:: - pair:: node option; PCMK_dh_max_bits + pair: node option; PCMK_dh_max_bits PCMK_dh_max_bits - :ref:`nonnegative integer ` - 0 (no maximum) - *Advanced Use Only:* Set an upper bound on the bit length of the prime number generated for Diffie-Hellman parameters needed by TLS connections. The default is no maximum. The server (Pacemaker Remote daemon, or CIB manager configured to accept remote clients) will use this value to provide a ceiling for the value recommended by the GnuTLS library. The library will only accept a limited number of specific values, which vary by library version, so setting these is recommended only when required for compatibility with specific client versions. Clients do not use ``PCMK_dh_max_bits``. * - .. _pcmk_ipc_type: .. index:: - pair:: node option; PCMK_ipc_type + pair: node option; PCMK_ipc_type PCMK_ipc_type - :ref:`enumeration ` - shared-mem - *Advanced Use Only:* Force use of a particular IPC method. Allowed values: * ``shared-mem`` * ``socket`` * ``posix`` * ``sysv`` * - .. _pcmk_ipc_buffer: .. index:: - pair:: node option; PCMK_ipc_buffer + pair: node option; PCMK_ipc_buffer PCMK_ipc_buffer - :ref:`nonnegative integer ` - 131072 - *Advanced Use Only:* Specify an IPC buffer size in bytes. This can be useful when connecting to large clusters that result in messages exceeding the default size (which will also result in log messages referencing this variable). * - .. _pcmk_cluster_type: .. index:: - pair:: node option; PCMK_cluster_type + pair: node option; PCMK_cluster_type PCMK_cluster_type - :ref:`enumeration ` - corosync - *Advanced Use Only:* Specify the cluster layer to be used. If unset, Pacemaker will detect and use a supported cluster layer, if available. Currently, ``"corosync"`` is the only supported cluster layer. If multiple layers are supported in the future, this will allow overriding Pacemaker's automatic detection to select a specific one. * - .. _pcmk_schema_directory: .. index:: - pair:: node option; PCMK_schema_directory + pair: node option; PCMK_schema_directory PCMK_schema_directory - :ref:`text ` - |CRM_SCHEMA_DIRECTORY| - *Advanced Use Only:* Specify an alternate location for RNG schemas and XSL transforms. * - .. _pcmk_remote_schema_directory: .. index:: - pair:: node option; PCMK_remote_schema_directory + pair: node option; PCMK_remote_schema_directory PCMK_remote_schema_directory - :ref:`text ` - |PCMK__REMOTE_SCHEMA_DIR| - *Advanced Use Only:* Specify an alternate location on Pacemaker Remote nodes for storing newer RNG schemas and XSL transforms fetched from the cluster. * - .. _pcmk_valgrind_enabled: .. index:: - pair:: node option; PCMK_valgrind_enabled + pair: node option; PCMK_valgrind_enabled PCMK_valgrind_enabled - :ref:`enumeration ` - no - *Advanced Use Only:* Whether subsystem daemons should be run under ``valgrind``. Allowed values are the same as for ``PCMK_debug``. * - .. _pcmk_callgrind_enabled: .. index:: - pair:: node option; PCMK_callgrind_enabled + pair: node option; PCMK_callgrind_enabled PCMK_callgrind_enabled - :ref:`enumeration ` - no - *Advanced Use Only:* Whether subsystem daemons should be run under ``valgrind`` with the ``callgrind`` tool enabled. Allowed values are the same as for ``PCMK_debug``. * - .. _sbd_sync_resource_startup: .. index:: pair:: node option; SBD_SYNC_RESOURCE_STARTUP SBD_SYNC_RESOURCE_STARTUP - :ref:`boolean ` - - If true, ``pacemakerd`` waits for a ping from ``sbd`` during startup before starting other Pacemaker daemons, and during shutdown after stopping other Pacemaker daemons but before exiting. Default value is set based on the ``--with-sbd-sync-default`` configure script option. * - .. _sbd_watchdog_timeout: .. index:: pair:: node option; SBD_WATCHDOG_TIMEOUT SBD_WATCHDOG_TIMEOUT - :ref:`duration ` - - If the ``stonith-watchdog-timeout`` cluster property is set to a negative or invalid value, use double this value as the default if positive, or use 0 as the default otherwise. This value must be greater than the value of ``stonith-watchdog-timeout`` if both are set. * - .. _valgrind_opts: .. index:: - pair:: node option; VALGRIND_OPTS + pair: node option; VALGRIND_OPTS VALGRIND_OPTS - :ref:`text ` - - *Advanced Use Only:* Pass these options to valgrind, when enabled (see ``valgrind(1)``). ``"--vgdb=no"`` should usually be specified because ``pacemaker-execd`` can lower privileges when executing commands, which would otherwise leave a bunch of unremovable files in ``/tmp``.