diff --git a/doc/sphinx/Pacemaker_Development/helpers.rst b/doc/sphinx/Pacemaker_Development/helpers.rst index c6d2d20e81..94b83d4e00 100644 --- a/doc/sphinx/Pacemaker_Development/helpers.rst +++ b/doc/sphinx/Pacemaker_Development/helpers.rst @@ -1,452 +1,467 @@ C Development Helpers --------------------- .. index:: single: unit testing Refactoring ########### Pacemaker uses an optional tool called `coccinelle `_ to do automatic refactoring. coccinelle is a very complicated tool that can be difficult to understand, and the existing documentation makes it pretty tough to get started. Much of the documentation is either aimed at kernel developers or takes the form of grammars. However, it can apply very complex transformations across an entire source tree. This is useful for tasks like code refactoring, changing APIs (number or type of arguments, etc.), catching functions that should not be called, and changing existing patterns. coccinelle is driven by input scripts called `semantic patches `_ written in its own language. These scripts bear a passing resemblance to source code patches and tell coccinelle how to match and modify a piece of source code. They are stored in ``devel/coccinelle`` and each script either contains a single source transformation or several related transformations. In general, we try to keep these as simple as possible. In Pacemaker development, we use a couple targets in ``devel/Makefile.am`` to control coccinelle. The ``cocci`` target tries to apply each script to every Pacemaker source file, printing out any changes it would make to the console. The ``cocci-inplace`` target does the same but also makes those changes to the source files. A variety of warnings might also be printed. If you aren't working on a new script, these can usually be ignored. If you are working on a new coccinelle script, it can be useful (and faster) to skip everything else and only run the new script. The ``COCCI_FILES`` variable can be used for this: .. code-block:: none $ make -C devel COCCI_FILES=coccinelle/new-file.cocci cocci This variable is also used for preventing some coccinelle scripts in the Pacemaker source tree from running. Some scripts are disabled because they are not currently fully working or because they are there as templates. When adding a new script, remember to add it to this variable if it should always be run. One complication when writing coccinelle scripts is that certain Pacemaker source files may not use private functions (those whose name starts with ``pcmk__``). Handling this requires work in both the Makefile and in the coccinelle scripts. The Makefile deals with this by maintaining two lists of source files: those that may use private functions and those that may not. For those that may, a special argument (``-D internal``) is added to the coccinelle command line. This creates a virtual dependency named ``internal``. In the coccinelle scripts, those transformations that modify source code to use a private function also have a dependency on ``internal``. If that dependency was given on the command line, the transformation will be run. Otherwise, it will be skipped. This means that not all instances of an older style of code will be changed after running a given transformation. Some developer intervention is still necessary to know whether a source code block should have been changed or not. Probably the easiest way to learn how to use coccinelle is by following other people's scripts. In addition to the ones in the Pacemaker source directory, there's several others on the `coccinelle website `_. Sanitizers ########## gcc supports a variety of run-time checks called sanitizers. These can be used to catch programming errors with memory, race conditions, various undefined behavior conditions, and more. Because these are run-time checks, they should only be used during development and not in compiled packages or production code. Certain sanitizers cannot be combined with others because their run-time checks cause interfere. Instead of trying to figure out which combinations work, it is simplest to just enable one at a time. Each supported sanitizer requires an installed libray. In addition to just enabling the sanitizer, their use can be configured with environment variables. For example: .. code-block:: none $ ASAN_OPTIONS=verbosity=1:replace_str=true crm_mon -1R Pacemaker supports the following subset of gcc's sanitizers: +--------------------+-------------------------+----------+----------------------+ | Sanitizer | Configure Option | Library | Environment Variable | +====================+=========================+==========+======================+ | Address | --with-sanitizers=asan | libasan | ASAN_OPTIONS | +--------------------+-------------------------+----------+----------------------+ | Threads | --with-sanitizers=tsan | libtsan | TSAN_OPTIONS | +--------------------+-------------------------+----------+----------------------+ | Undefined behavior | --with-sanitizers=ubsan | libubsan | UBSAN_OPTIONS | +--------------------+-------------------------+----------+----------------------+ The undefined behavior sanitizer further supports suboptions that need to be given as CFLAGS when configuring pacemaker: .. code-block:: none $ CFLAGS=-fsanitize=integer-divide-by-zero ./configure --with-sanitizers=ubsan For more information, see the `gcc documentation `_ which also provides links to more information on each sanitizer. Unit Testing ############ Where possible, changes to the C side of Pacemaker should be accompanied by unit tests. Much of Pacemaker cannot effectively be unit tested (and there are other testing systems used for those parts), but the ``lib`` subdirectory is pretty easy to write tests for. Pacemaker uses the `cmocka unit testing framework `_ which looks a lot like other unit testing frameworks for C and should be fairly familiar. In addition to regular unit tests, cmocka also gives us the ability to use `mock functions `_ for unit testing functions that would otherwise be difficult to test. Organization ____________ Pay close attention to the organization and naming of test cases to ensure the unit tests continue to work as they should. Tests are spread throughout the source tree, alongside the source code they test. For instance, all the tests for the source code in ``lib/common/`` are in the ``lib/common/tests`` directory. If there is no ``tests`` subdirectory, there are no tests for that library yet. Under that directory, there is a ``Makefile.am`` and additional subdirectories. Each subdirectory contains the tests for a single library source file. For instance, all the tests for ``lib/common/strings.c`` are in the ``lib/common/tests/strings`` directory. Note that the test subdirectory does not have a ``.c`` suffix. If there is no test subdirectory, there are no tests for that file yet. Finally, under that directory, there is a ``Makefile.am`` and then various source files. Each of these source files tests the single function that it is named after. For instance, ``lib/common/tests/strings/pcmk__btoa_test.c`` tests the ``pcmk__btoa()`` function in ``lib/common/strings.c``. If there is no test source file, there are no tests for that function yet. The ``_test`` suffix on the test source file is important. All tests have this suffix, which means all the compiled test cases will also end with this suffix. That lets us ignore all the compiled tests with a single line in ``.gitignore``: .. code-block:: none /lib/*/tests/*/*_test Adding a test _____________ Testing a new function in an already testable source file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Follow these steps if you want to test a function in a source file where there are already other tested functions. For the purposes of this example, we will add a test for the ``pcmk__scan_port()`` function in ``lib/common/strings.c``. As you can see, there are already tests for other functions in this same file in the ``lib/common/tests/strings`` directory. * cd into ``lib/common/tests/strings`` * Add the new file to the the ``check_PROGRAMS`` variable in ``Makefile.am``, making it something like this: .. code-block:: none check_PROGRAMS = \ pcmk__add_word_test \ pcmk__btoa_test \ pcmk__scan_port_test +* Double check the setting of ``AM_LDFLAGS`` in ``Makefile.am``. If none of the + tests of this source file require using a mocked function, this should be empty, + like so: + + .. code-block:: none + + AM_LDFLAGS = + + However, if any test (including your new one) uses a mocked function, it should + be set: + + .. code-block:: none + + AM_LDFLAGS = $(LDFLAGS_WRAP) + * Create a new ``pcmk__scan_port_test.c`` file, copying the copyright and include boilerplate from another file in the same directory. * Continue with the steps in `Writing the test`_. Testing a function in a source file without tests ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Follow these steps if you want to test a function in a source file where there are not already other tested functions, but there are tests for other files in the same library. For the purposes of this example, we will add a test for the ``pcmk_acl_required()`` function in ``lib/common/acls.c``. At the time of this documentation being written, no tests existed for that source file, so there is no ``lib/common/tests/acls`` directory. * Add to ``AC_CONFIG_FILES`` in the top-level ``configure.ac`` file so the build process knows to use directory we're about to create. That variable would now look something like: .. code-block:: none dnl Other files we output AC_CONFIG_FILES(Makefile \ ... lib/common/tests/Makefile \ lib/common/tests/acls/Makefile \ lib/common/tests/agents/Makefile \ ... ) * cd into ``lib/common/tests`` * Add to the ``SUBDIRS`` variable in ``Makefile.am``, making it something like: .. code-block:: none SUBDIRS = agents acls cmdline flags operations strings utils xpath results * Create a new ``acls`` directory, copying the ``Makefile.am`` from some other directory. * cd into ``acls`` * Get rid of any existing values for ``check_PROGRAMS`` and set it to ``pcmk_acl_required_test`` like so: .. code-block:: none check_PROGRAMS = pcmk_acl_required_test * Follow the steps in `Testing a new function in an already testable source file`_ to create the new ``pcmk_acl_required_test.c`` file. Testing a function in a library without tests ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Adding a test case for a function in a library that doesn't have any test cases to begin with is only slightly more complicated. In general, the steps are the same as for the previous section, except with an additional layer of directory creation. For the purposes of this example, we will add a test case for the ``lrmd_send_resource_alert()`` function in ``lib/lrmd/lrmd_alerts.c``. Note that this may not be a very good function or even library to write actual unit tests for. * Add to ``AC_CONFIG_FILES`` in the top-level ``configure.ac`` file so the build process knows to use directory we're about to create. That variable would now look something like: .. code-block:: none dnl Other files we output AC_CONFIG_FILES(Makefile \ ... lib/lrmd/Makefile \ lib/lrmd/tests/Makefile \ lib/services/Makefile \ ... ) * cd into ``lib/lrmd`` * Create a ``SUBDIRS`` variable in ``Makefile.am`` if it doesn't already exist. Most libraries should not have this variable already. .. code-block:: none SUBDIRS = tests * Create a new ``tests`` directory and add a ``Makefile.am`` with the following contents: .. code-block:: none SUBDIRS = lrmd_alerts * Follow the steps in `Testing a function in a source file without tests`_ to create the rest of the new directory structure. * Follow the steps in `Testing a new function in an already testable source file`_ to create the new ``lrmd_send_resource_alert_test.c`` file. Adding to an existing test case ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If all you need to do is add additional test cases to an existing file, none of the above work is necessary. All you need to do is find the test source file with the name matching your function and add to it and then follow the instructions in `Writing the test`_. Writing the test ________________ A test case file contains a fair amount of boilerplate. For this reason, it's usually easiest to just copy an existing file and adapt it to your needs. However, here's the basic structure: .. code-block:: c /* * Copyright 2021 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU Lesser General Public License * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. */ #include #include #include #include #include #include /* Put your test-specific includes here */ /* Put your test functions here */ int main(int argc, char **argv) { /* Register your test functions here */ cmocka_set_message_output(CM_OUTPUT_TAP); return cmocka_run_group_tests(tests, NULL, NULL); } Each test-specific function should test one aspect of the library function, though it can include many assertions if there are many ways of testing that one aspect. For instance, there might be multiple ways of testing regular expression matching: .. code-block:: c static void regex(void **state) { const char *s1 = "abcd"; const char *s2 = "ABCD"; assert_true(pcmk__strcmp(NULL, "a..d", pcmk__str_regex) < 0); assert_true(pcmk__strcmp(s1, NULL, pcmk__str_regex) > 0); assert_int_equal(pcmk__strcmp(s1, "a..d", pcmk__str_regex), 0); } Each test-specific function must also be registered or it will not be called. This is done with ``cmocka_unit_test()`` in the ``main`` function: .. code-block:: c const struct CMUnitTest tests[] = { cmocka_unit_test(regex), }; Running _______ If you had to create any new files or directories, you will first need to run ``./configure`` from the top level of the source directory. This will regenerate the Makefiles throughout the tree. If you skip this step, your changes will be skipped and you'll be left wondering why the output doesn't match what you expected. To run the tests, simply run ``make check`` after previously building the source with ``make``. The test cases in each directory will be built and then run. This should not take long. If all the tests succeed, you will be back at the prompt. Scrolling back through the history, you should see lines like the following: .. code-block:: none PASS: pcmk__strcmp_test 1 - same_pointer PASS: pcmk__strcmp_test 2 - one_is_null PASS: pcmk__strcmp_test 3 - case_matters PASS: pcmk__strcmp_test 4 - case_insensitive PASS: pcmk__strcmp_test 5 - regex ============================================================================ Testsuite summary for pacemaker 2.1.0 ============================================================================ # TOTAL: 33 # PASS: 33 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[7]: Leaving directory '/home/clumens/src/pacemaker/lib/common/tests/strings' The testing process will quit on the first failed test, and you will see lines like these: .. code-block:: none PASS: pcmk__scan_double_test 3 - trailing_chars FAIL: pcmk__scan_double_test 4 - typical_case PASS: pcmk__scan_double_test 5 - double_overflow PASS: pcmk__scan_double_test 6 - double_underflow ERROR: pcmk__scan_double_test - exited with status 1 PASS: pcmk__starts_with_test 1 - bad_input ============================================================================ Testsuite summary for pacemaker 2.1.0 ============================================================================ # TOTAL: 56 # PASS: 54 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 1 ============================================================================ See lib/common/tests/strings/test-suite.log Please report to users@clusterlabs.org ============================================================================ make[7]: *** [Makefile:1218: test-suite.log] Error 1 make[7]: Leaving directory '/home/clumens/src/pacemaker/lib/common/tests/strings' The failure is in ``lib/common/tests/strings/test-suite.log``: .. code-block:: none ERROR: pcmk__scan_double_test ============================= 1..6 ok 1 - empty_input_string PASS: pcmk__scan_double_test 1 - empty_input_string ok 2 - bad_input_string PASS: pcmk__scan_double_test 2 - bad_input_string ok 3 - trailing_chars PASS: pcmk__scan_double_test 3 - trailing_chars not ok 4 - typical_case FAIL: pcmk__scan_double_test 4 - typical_case # 0.000000 != 3.000000 # pcmk__scan_double_test.c:80: error: Failure! ok 5 - double_overflow PASS: pcmk__scan_double_test 5 - double_overflow ok 6 - double_underflow PASS: pcmk__scan_double_test 6 - double_underflow # not ok - tests ERROR: pcmk__scan_double_test - exited with status 1 At this point, you need to determine whether your test case is incorrect or whether the code being tested is incorrect. Fix whichever is wrong and continue. Debugging ######### gdb ___ If you use ``gdb`` for debugging, some helper functions are defined in ``devel/gdbhelpers``, which can be given to ``gdb`` using the ``-x`` option. From within the debugger, you can then invoke the ``pcmk`` command that will describe the helper functions available.