diff --git a/crm/crm-1.0.dtd b/crm/crm-1.0.dtd
index 8e324e59b2..879354cc03 100644
--- a/crm/crm-1.0.dtd
+++ b/crm/crm-1.0.dtd
@@ -1,696 +1,699 @@
 <?xml version="1.0" encoding="UTF-8" ?>
 
 <!-- This document describes the XML elements used by the CRM. 
   
   The DTD given here is an annotated syntax definition.
   
   GLOBAL TODOs:
 	- Versionize DTD so we can validate against a specific version
 	- Timestamps et al should probably not be CDATA but more
 	  specific types
 -->
 
 <!--
 
 The CIB is described quit well in section 5 of the crm.txt (checked into
 CVS in the crm directory) so it is not repeated here.  Suffice to say
 that it stores the configuration and runtime data required for
 cluster-wide resource managment in XML format.
 
 Because of inter-version compatibility, we cannot directly validate the
 CIB against this DTD; there may be fields present the local node cannot
 deal with. But the DTD can still be used as a tool to validate whether
 the output from the admin frontends is valid, and thus serves as a tool
 for debugging.
 
 CIB: Information Structure
 ===========================
 The CIB is divided into two main sections: The "static" configuration
 part and the "dynamic" status.
 
 The configuration contains - suprisingly - the configuration of the
 cluster, namely node attributes, resource instance configuration, and
 the constraints which describe the dependencies between all these. To
 identify the most recent configuration available in the cluster, this
 section is timestamped with the unique timestamp of the last update.
 
 The status part is dynamically generated / updated by the CRM system and
 represents the current status of the cluster; which nodes are up, down
 or crashed, which resources are running where etc. The timestamps here
 represent when the last change went into this section.
 
 All timestamps are given in seconds since the epoch with millisecond
 precision. 
 
 Every information carrying object has an "id" tag, which is basically
 the UUID of it, should we ever need to access it directly.
 
 More details are given in the annotated DTD below.
 
 -->
 
 <!-- configuration and status must be present. Why else would you
      have a CIB? -->
 <!ELEMENT cib (configuration, status)>
 
 <!-- TODO: Is the version element necessary? If we flag the DTD against
      which the CIB validates, the version is implicit... -->
 
 <!ATTLIST cib
           version      CDATA       #REQUIRED
           timestamp    CDATA       #REQUIRED>
 
-<!ELEMENT configuration (nodes, resources, constraints, metadata)>
+<!ELEMENT configuration (nodes, resources, constraints, metadata, crm_config)>
 <!-- The most uptodate configuration in the cluster is automatically
      determined by the CRM via the timestamp; the source indicates
      which node that was. In case of updates at runtime, the source
      should be set to the node from which the last update occured.
 
      The serial gets incremented by one for any update to the
      configuration.
 
      TODO: Same comment about the version applies.
  -->
 
 <!ATTLIST configuration
           version      CDATA       #REQUIRED
           source       CDATA       #REQUIRED
 	  serial       CDATA	   #REQUIRED
           timestamp    CDATA       #REQUIRED>
 
+<!ELEMENT crm_config (nvpair*)>
+
 <!ELEMENT nodes       (node*)>
 
 <!-- Each node can have additional attributes, such as "connected to SAN
      subsystem whatever", and then a constraint could include a
      dependency on such an attribute being present or having a specific
      value. -->
 <!ELEMENT node (attributes?)>
 <!-- 
      Description in all elements is opaque to the CRM, some
      adminstrative comments.
 
      "id" refers to the node's UUID.
 
      "uname" is the result of uname -n
 
      "dc_weight" is an optional weight for influencing the DC election
      process...
 
      TODO: Do we need to know about ping nodes...?
      -->
 <!ATTLIST node
           id            CDATA #REQUIRED
 	  uname		CDATA #REQUIRED
           description   CDATA #IMPLIED
 	  dc_weight	CDATA #IMPLIED
           type          (member|ping) #REQUIRED>
 
 <!-- RESOURCES -->
 
 <!ELEMENT resources   (resource*)>
 
 <!-- 
      
      "id" is a short name consisting of up to 64 simple ascii characters
      [a-zA-Z0-9_\-]
 
      "priority" dictates the order in which resources will be processed
 
      Version constraints are handled by rsc_location constraints.  
      Use version=1.2 or version>2.0 etc.
 
 -->
 <!ELEMENT resource (instance_attributes*)>
 <!ATTLIST resource
           id            CDATA #REQUIRED
           description   CDATA #IMPLIED
           class         (ocf|init|heartbeat|stonith)   #REQUIRED
 	  priority      CDATA #IMPLIED
           type          CDATA #REQUIRED
 	  min_version   CDATA #REQUIRED
 
 	  start_timeout CDATA #REQUIRED
 	  stop_timeout  CDATA #REQUIRED
 
 	  on_stopfail       (ignore|stonith|block)    'block'
 	  restart_type      (ignore|restart|recover)  'ignore'
 
 	  post_event_notify (true|false)              'false'
 	  pre_event_notify  (true|false)              'false'
 
 	  max_instances  CDATA #REQUIRED
 	  max_masters    CDATA #REQUIRED
 	  max_node_instances  CDATA #REQUIRED
 	  max_node_masters    CDATA #REQUIRED>
 
 <!--
 
      Some of these may need to be overridden on a per-node /
      per-node-attribute basis (ie, eth1 is eth0 on some nodes...). Same
      is true for timings.
      
      This is expressed as follows: You can have multiple sets of
      'instance attributes'. The one with the highest weight is chosen.
 
      Otherwise, if a matching rule is found, the instance rsc_parameters
      there override the defaults completely; the attr_expression list is
      evaluated ordered by the no tag. The weight attribute doesn't make
      much sense here.
 
 -->
 <!ELEMENT instance_attributes (rule?, rsc_parameters)>
 <!ATTLIST instance_attributes
 	  weight	CDATA #IMPLIED
 	  id		CDATA #REQUIRED>
 
 <!-- CONSTRAINTS -->
 <!ELEMENT constraints (rsc_to_rsc*,rsc_location*)>
 
 <!-- Every constraint entry also has a 'lifetime' attribute, which
      expresses when this is applicable. For example, a constraint could
      be purged automatically when a node reboots, or after a week.
 
      TODO: The syntax of this one needs more definition... -->
 
 <!-- Express dependencies between the elements.
      
      The type specifies whether or not a resource affects the start/stop
      ordering (ie, that resource 'from' should be started after 'to'),
      or whether it's a placement dependency (ie, 'from' should run on the
      same node as 'to').
 
      The 'strength' describes how strong the dependency is (RFC-style):
      
      An ordering dependency of strength 'must' implies that a resource
      must be started after another one; it will not work without the
      other one being present. If it was 'should' only, the resource will
      try to be started afterwards, but still be started if it is not
      present and will be started beforehand if required (perhaps if a
      constraint loop was created).
      
      An ordering dependency of "must not" would imply the opposite; if
      some higher priority resource has led to the 'to' being activated,
      this resource will not be run.
 
      The placement policies work in the same fashion.
 
  -->
 <!ELEMENT rsc_order EMPTY>
 <!ATTLIST rsc_order
 	  id	    CDATA #REQUIRED
 	  from	    CDATA #REQUIRED
 	  to	    CDATA #REQUIRED
 	  lifetime  CDATA #IMPLIED
 	  timestamp CDATA #REQUIRED
 	  type      (before|after)>
 
 <!ELEMENT rsc_dependancy EMPTY>
 <!ATTLIST rsc_dependancy
 	  id	    CDATA #REQUIRED
 	  from	    CDATA #REQUIRED
 	  to	    CDATA #REQUIRED
 	  lifetime  CDATA #IMPLIED
 	  timestamp CDATA #REQUIRED
 	  type      (must|mustnot) #REQUIRED>
 
 <!-- Specify which nodes are eligible for running a given resource. 
      
      During processing, all rsc_to_node for a given rsc are evaluated.
      
      All nodes start out with their base weight (which defaults to zero,
      but can be modified via a node_baseweight dependency), and then all
      matching rsc_to_node constraints modify their weight; it is either
      in- or decremented accordingly.
 
      "set" is different, the first set will finalize the score for the
      matching nodes.
 
      Then the highest non-zero available node is determined to place the
      resource.
      
      The rsc references, suprisingly, a resource id.
 
   -->
 
 <!ELEMENT rsc_location (rule+)>
 <!ATTLIST rsc_location
 	  id	      CDATA #REQUIRED
 	  description CDATA #IMPLIED
 	  rsc         CDATA #REQUIRED
 	  lifetime    CDATA #IMPLIED
 	  timestamp   CDATA #IMPLIED>
 
 <!--
 
     A special case exists when no node_expressions are present.  In this case
     the rule applies to all nodes.
 
     "score" adjusts the prefernce for running on the matched nodes.  Nodes that
     end up with a -ve score will never run the resource.
 
     "result" is optional and determins if matched nodes can or cannot run the
     resource
 
     "boolean_op" determins how the results of multiple node_expressions are
     combined.
 
 -->
 <!ELEMENT rule (expression*)>
 <!ATTLIST rule
 	  id         CDATA        #REQUIRED
 	  score      CDATA        #IMPLIED
 	  result     (can|cannot) #IMPLIED
 	  boolean_op (or|and)     'and'>
 
 <!--
     Reference a set of nodes, either by directly specifying a node id,
       uname, or by matching its attributes. 
     
     (You can express "OR" by having multiple rsc_to_node / node_baseweight
     entries.)
     
     "id" is mostly for debug purposes
     
     Two builtin attributes will be node id and node uname so that:
       attribute=id value=8C05CA5C-C9E3-11D8-BEE6-000A95B71D78 operation=eq, and
       attribute=uname value=test1 operation=eq
     would both be valid tests.
 
     Additionally, the "running" and "not_running" tests checks to see if
       the value specified for "attribute" is a resource that is (not) running
       on the node.  So these would both be valid tests.
         attribute=myWebServer operation=running, and
         attribute=myWebServer operation=not_running
 
     "type" determines how the values being tested.
       For "integer", they would be converted into a number format (probably
       floats) before being compared.
       The "version" type is intended to solve the problem of comparing
       1.2 and 1.10
 -->
 
 <!ELEMENT expression EMPTY>
 <!ATTLIST expression
 	  id         CDATA #REQUIRED
 	  attribute  CDATA #REQUIRED
 	  operation  (lt|gt|lte|gte|eq|ne|exists|notexists|running|not_running)
 	  value      CDATA #IMPLIED
 	  type	     (integer|string|version)    'string'>
 
+
 <!ELEMENT metadata ra_entry>
 <!--
 
     id is largely ignored except for debug purposes
 
     class will be one of lsb, ocf, heartbeat or stonith but remains a CDATA
       in case others are added in the future
 
     type is (strangely) the type of the RA (something like apache or IPaddr)
 
     This section is compiled automatically from information supplied by the
       LRM.  
 
     In order to reduce bloat and information redundancy the assumption has
       been made that all instances of an RA in the cluster carry the same
       metadata values regardless of their version or the node they reside on.
       The only exception to this is the version tag which can be different.
       
       Anyone caught breaking this rule will be shot on sight.
 
 -->
 <!ELEMENT ra_entry (parameters)>
 <!ATTLIST ra_entry 
 	id	   CDATA #REQUIRED
 <!-- possibly: version CDATA #REQUIRED -->
         class      (ocf|init|heartbeat|stonith)	#REQUIRED
 	type	   CDATA #REQUIRED>
 
 <!-- STATUS SECTION -->
 <!-- Details about the status of each node configured.
 
      In places, a "source" attribute has been added so that the CRM is able
      to know where this information came from.  This is helpful during the
      merging process (performed by a new DC and perhaps periodically) as it
      allows the CRM to allow nodes to be authoritive about themselves if
      appropriate (ie. which resources it is running, but perhaps not always
      about its own health). TODO: Clarify meaning.
  
      To avoid duplication of data, state entries only carry references to
      nodes and resources. 
      
 -->
 <!ELEMENT status (crm_state,node_state*)>
 
 <!-- Information about the CRM Layer of the cluster.
 
 	"dc_uname" is the uname of the currently elected as DC.
 
 	More attributes may be added later point.
 
 -->
 <!ELEMENT crm_status EMPTY>
 <!ATTLIST crm_status 
 	id	   CDATA #REQUIRED
 	dc_uname   CDATA #REQUIRED>
 
 
 <!-- 	The state of a given node.  
 	
 	This information is updated by the DC based on inputs from 
 	sources such as the CCM, status messages from remote LRMs and 
 	requests from other nodes. 
 
 	"id" is the node's UUID.
 
 	"state" is either active (both CRM and CCM are up and the node 
 	is fully active in the cluster), in_ccm (node is around in the 
 	membership, but not taking part in CRM activities) or down
 	(neither).
 	
 	"unclean" is set to the current time when the node leaves the 
 	cluster ungracefully and is an indication that the node 
 	needs to be shot.  Any invokation of the PE while this attibute
         will result in a STONITH op being sent to the TE (which may or
         may not get to invoke it if the transition is aborted).
 
         Setting "clear_unclean" will unset this field.  Normally this is
         after the Transitioner has successfully shot the node, OR the node
 	rejoins the cluster cleanly.
 
         "shutdown" and "clear_shutdown" operate in the same manner as
         above but for shutting down the CRMd.
 
 	"expected" is our expectation of the state. This requires some
 	book-keeping on the part of the other nodes to remember the last
 	state of any other node by updating it to the latest relayed to
 	them.
 	
 	"source" then states which node contributed this state entry.
 	If unclean is not set, then "source" refers to the node that
 	last updated the "node_state" entry.
 
 	There is a period of time between when we recognise the node
 	is unlean and when it is shot.  The "assassin" attribute records the
         name of the node which has been asked to shoot it.
 
  	A node which is expected == down && join == member is, in
 	fact, going down. The Policy Engine will migrate resources away
 	from it.
 	
 	Ideally, there should be a node_state entry for every entry in
 	the <nodes> list.
 -->
 <!ELEMENT node_state (lrm, attributes)>
 <!ATTLIST node_state
 	id		CDATA			#REQUIRED
 	crmd	  	(online|offline)        'offline'
 	join	  	(pending|member|down)	'down'
 	expected	(pending|member|down)	'down'
 	in_ccm	  	(true|false)		'false'
 	unclean		CDATA			#IMPLIED
 	shutdown	CDATA			#IMPLIED
 	clear_unclean	CDATA			#IMPLIED
 	clear_shutdown	CDATA			#IMPLIED
 	assassin        CDATA                   #IMPLIED
 	source		CDATA			#IMPLIED
 	timestamp	CDATA			#REQUIRED>
 
 <!-- Information from the Local Resource Manager of the node.
      
      Running resources, installed Resource Agents etc. -->
      
 <!ELEMENT lrm (lrm_resources,lrm_agents)>
 <!ATTLIST lrm
         id      CDATA #REQUIRED
 	version	CDATA #REQUIRED>
 
 <!-- TODO: Need to define howto handle agents provided by multiple
      sources. The OCF RA spec allows a resource type to be provided by
      multiple Resource Agents; how do we deal with that? -->
 <!ELEMENT lrm_agents (lrm_agent*)>
 
 <!ELEMENT lrm_agent (resource-agent?)>
 <!ATTLIST lrm_agent
 	type	CDATA #REQUIRED
 	class	(ocf|init|heartbeat|stonith) #REQUIRED
 	version CDATA #REQUIRED>
 
 <!-- TODO: In fact, this should reference the OCF RA DTD for class ==
 	   ocf, but I don't know how to specify that ;-)
 
      "last_op" records the last known operation invoked on a resource/node 
         combination.  It is either supplied by the LRM or updated by the
         Transitioner when an action is invoked.
 
      "op_code" is supplied by the LRM and conforms to this enum:
 typedef enum {
 	LRM_OP_DONE,
 	LRM_OP_CANCELLED,
 	LRM_OP_TIMEOUT,
 	LRM_OP_NOTSUPPORTED,
 	LRM_OP_ERROR,
 } op_status_t;
 
      "rsc_state" is really only a guide.  All actions are taken based on
 	"last_op" and "op_code"
 	
  -->
 <!ELEMENT resource_agent EMPTY>
 
 <!ELEMENT lrm_resources (rsc_state*)>
 
 <!ELEMENT rsc_state (can_fence)*>
 <!ATTLIST rsc_state
           id		CDATA #REQUIRED
           rsc_id	CDATA #REQUIRED
           node_id	CDATA #IMPLIED
 	  ra_state	(stopped|starting|started|fail|restarting|stopping|stop_fail)
 	  			#REQUIRED
 	  last_op	CDATA #REQUIRED
 	  op_code	CDATA #REQUIRED
           timestamp	CDATA #REQUIRED>
 
 <!-- id is the uname of the node that can be fenced by this resource -->
 <!ELEMENT can_fence EMPTY>
 <!ATTLIST can_fence
           id		CDATA #REQUIRED>
 
 <!-- ============================================================== -->
 <!-- ============================================================== -->
 
 <!--
  The Transition Graph is an ordered list of synapses, which consist of a
  list of pre-conditions (events) they are waiting for / triggering on
  and a (list of) actions which are initiated when they "fire". The first
  synapse to have a matching input "consumes" the event unless specified
  differently.
  
 -->
 
 <!ELEMENT transition_graph (action_set*,errors*)>
 
 <!-- When all inputs to a synapse are satisfied, the synapse fires the
      actions.
      
      "reset" states whether after having fired once, the synapse resets
      and accepts input again. "no": After having fired, the synapse
      becomes completely inactive. "yes": it completely resets. "greedy":
      The synapse will still 'consume' input, but not fire again.
 -->
 
 <!ELEMENT synapse (inputs,action_set)>
 <!ATTLIST synapse
 	  id	CDATA #REQUIRED
 	  reset	(no|yes|greedy) 'greedy'>
 
 <!ELEMENT inputs (trigger+)>
 
 <!-- event_spec specifies the event we are looking for.
      This can be anything from "rsc foo started somewhere / on node X",
      "STONITH of node A completed", "DEFAULT" etc... 
 
      If an event is "consumed", no further inputs in other synapses will
      be triggered by it. If "no", the event will pass through,
      triggering us but otherwise completely unaltered. If "marks", we
      simply remember that the event has been accepted somewhere, but
      pass it on.
      
 -->
 <!ELEMENT trigger (rsc_state*,node_state*,pseudo_event*,crm_event*)>
 <!ATTLIST trigger
 	  id		CDATA #REQUIRED
 	  consumes	(no|yes|marks) 'marks'>
 
 
 <!-- STONITH events end up being rsc_ops; remember that we hope to
      simply invoke 'STONITH Resource Agent' and feed it with appropriate
      parameters.
 
   -->
 <!ELEMENT action_set (rsc_op*,pseudo_event*,crm_event*)>
 
 <!-- The resource object inside the rsc_op object differs from the
      resources list only in content, not in syntax.
      - it is pre-processed, ie there's a maximum of one set of
        instance_parameters
      
      on_node is the uname of the node on which to trigger the operation.
 
      The operation is the command passed to the Resource Agent.
 
      "runnable" should probably be removed and is a legacy of development
 
      "optional" indicates to the Transitioner that the action is available
      but not manditory.  This is useful when resources depend on others which
      may or may not need to be moved/restarted.
 
      "discard" may or not be needed - i need to check but the intention was
      to not bother with trying to stop a failed resource before stonithing a 
      node.
 
      "allow_fail" when set to true, the transition isnt aborted when the 
      action fails.  eg. a stop or shutdown isnt fatal when a STONITH is also
      pending for that node.
 
 -->
 
 <!ELEMENT rsc_op (resource)>
 <!ATTLIST rsc_op
 	id	   CDATA        #REQUIRED
 	runnable   (true|false) 'true'
 	optional   (true|false) 'false'
 	discard    (true|false) 'false'
 	allow_fail (true|false) 'false'
 	on_node	   CDATA        #REQUIRED
 	operation  CDATA	#REQUIRED>
 
 <!-- For added flexibility, an action can trigger an event, which is
      then consumed somewhere else. Woah. Cool. 
 
 Andrew:
      not sure these will be required long-term.  right now they are used
      for STONITTH ops but that should change once they become resources.
 -->
 <!ELEMENT pseudo_event EMPTY>
 <!ATTLIST pseudo_event
 	id	CDATA #REQUIRED
 	runnable   (true|false) 'true'
 	optional   (true|false) 'false'
 	discard    (true|false) 'false'
 	allow_fail (true|false) 'false'>
 	
 <!-- crm_event: We can instruct a crmd to shutdown (maybe the whole node?),
      sign-out cleanly, or to retrigger the DC election.
 -->
 <!ELEMENT crm_event EMPTY>
 <!ATTLIST crm_event
 	id	CDATA #REQUIRED
 	runnable   (true|false) 'true'
 	optional   (true|false) 'false'
 	discard    (true|false) 'false'
 	allow_fail (true|false) 'false'
 	on_node	CDATA #REQUIRED
 	operation (shutdown|signout|signup|election) #REQUIRED>
 
 <!-- ============================================================== -->
 <!-- ============================================================== -->
 
 <!-- crm_message: The messages we exchange between components and over
      the network. 
 
 	For type == reply, reference references the id of the original
 	msg.
   -->
 
 <!ELEMENT crm_message (msg_addr,msg_addr,operation,op_reply?,msg_data)>
 <!ATTLIST crm_message
           version	CDATA '1'
 	  type		(request|reply)	#REQUIRED
 	  id		CDATA		#REQUIRED
 	  reference	CDATA		#IMPLIED
           timestamp	CDATA		#REQUIRED>
 
 <!ELEMENT msg_addr EMPTY>
 <!ATTLIST msg_addr
 	part		(src|dst)	#REQUIRED
 	subsystem	(dc|crmd|dcib|cib|pe|te|lrm|admin) #REQUIRED
 	host		CDATA		#IMPLIED>
 
 <!-- What kinds of payload do we carry:
      op_reply	A generic reply message to a request
 
      TODO: Can msg_data not simply be melted into crm_message, cutting
      out one level of redirection?  
      (Andrew) Lets leave it separated least crm_message get too cluttered
 
      TODO: crm_message.type == reply is implicit if op_reply is present,
      should be merged
      (Andrew) Lets leave it in incase we want to piggyback requests on replies
 
 -->
 <!ELEMENT msg_data (rsc_op?,rsc_state?,lrm_state?,cib_fragment?,transition_graph?)>
 
 <!-- need to rationalize the list of operations -->
 <!ELEMENT operation (nvpair*)>
 <!ATTLIST operation
 	  op (noop|bump|query|create|update|delete|erase|store|replace|forward|join_ack|welcome|ping|vote|hello|announce|dc_beat|pe_calc|abort|quit|shutdown_crm|event_cc|te_abort|transition|te_complete|req_shutdown) 'noop'
           verbose	(true|false)	#IMPLIED
 	  timeout	CDATA	#REQUIRED>
 
 <!-- verbose reply for user consumption, may be useful. -->
 <!ELEMENT op_reply EMPTY>
 <!ATTLIST op_reply
 	  result	(ok|fail)	#REQUIRED
           verbose	CDATA		#IMPLIED
           timestamp	CDATA		#REQUIRED>
 
 <!-- ============================================================== -->
 <!-- ============================================================== -->
 <!-- Common elements -->
 
 <!ELEMENT nvpair EMPTY>
 <!-- No, you don't /have/ to give a value. There's a difference between
      a key not being present and a key not having a value. -->
 <!ATTLIST nvpair
 	  id		CDATA #REQUIRED
 	  name		CDATA #REQUIRED
 	  value		CDATA #IMPLIED>
 
 <!-- Same same, different names for clarity ;) -->
 <!ELEMENT attributes (nvpair*)>
 <!ELEMENT rsc_parameters (nvpair*)>
 
 
 
 <!-- 
 
  Shamelessly stolen from:
 
    http://www.opencf.org/cgi-bin/viewcvs.cgi/specs/ra/ra-api-1.dtd 
 
  but since it is Resource Agent metadata that we're storing here, 
  it makes sense.
 
 -->
 
 <!ELEMENT parameters (parameter*)>
 
 <!ELEMENT action_set (action*)>
 
 <!ELEMENT parameter (longdesc+,shortdesc+,content)>
 <!ATTLIST parameter
         name    CDATA   #REQUIRED
         unique  (1|0)   '0'>
 
 <!ELEMENT longdesc ANY>
 <!ATTLIST longdesc
         lang    NMTOKEN #IMPLIED>
 
 <!ELEMENT shortdesc ANY>
 <!ATTLIST shortdesc
         lang    NMTOKEN #IMPLIED>
 
 <!ELEMENT content EMPTY>
 <!ATTLIST content
         type    (string|integer|boolean)        #REQUIRED
         default CDATA   #IMPLIED>