diff --git a/.gitignore b/.gitignore index a3eb175569..c20924e4b9 100644 --- a/.gitignore +++ b/.gitignore @@ -1,354 +1,354 @@ # -# Copyright 2011-2024 the Pacemaker project contributors +# Copyright 2011-2025 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # # Common conventions for files that should be ignored *~ *.bz2 *.diff *.orig *.patch *.rej *.sed *.swp *.tar.gz *.tgz \#* .\#* logs # libtool artifacts *.la *.lo .libs libltdl libtool libtool.m4 ltdl.m4 /m4/argz.m4 /m4/ltargz.m4 /m4/ltoptions.m4 /m4/ltsugar.m4 /m4/ltversion.m4 /m4/lt~obsolete.m4 # autotools artifacts .deps .dirstamp Makefile Makefile.in aclocal.m4 autoconf autoheader autom4te.cache/ automake /confdefs.h config.log config.status configure /conftest* # gettext artifacts /ABOUT-NLS /m4/codeset.m4 /m4/fcntl-o.m4 /m4/gettext.m4 /m4/glibc2.m4 /m4/glibc21.m4 /m4/iconv.m4 /m4/intdiv0.m4 /m4/intl.m4 /m4/intldir.m4 /m4/intlmacosx.m4 /m4/intmax.m4 /m4/inttypes-pri.m4 /m4/inttypes_h.m4 /m4/lcmessage.m4 /m4/lib-ld.m4 /m4/lib-link.m4 /m4/lib-prefix.m4 /m4/lock.m4 /m4/longlong.m4 /m4/nls.m4 /m4/po.m4 /m4/printf-posix.m4 /m4/progtest.m4 /m4/size_max.m4 /m4/stdint_h.m4 /m4/threadlib.m4 /m4/uintmax_t.m4 /m4/visibility.m4 /m4/wchar_t.m4 /m4/wint_t.m4 /m4/xsize.m4 /po/*.gmo /po/*.header /po/*.pot /po/*.sin /po/Makefile.in.in /po/Makevars.template /po/POTFILES /po/Rules-quot /po/stamp-po # configure targets /agents/ocf/ClusterMon /agents/ocf/Dummy /agents/ocf/HealthCPU /agents/ocf/HealthIOWait /agents/ocf/HealthSMART /agents/ocf/Stateful /agents/ocf/SysInfo /agents/ocf/attribute /agents/ocf/controld /agents/ocf/ifspeed /agents/ocf/ping /agents/ocf/remote /agents/stonith/fence_legacy /agents/stonith/fence_watchdog /cts/benchmark/clubench /cts/cluster_test -/cts/cts /cts/cts-attrd /cts/cts-cli /cts/cts-exec /cts/cts-fencing /cts/cts-lab /cts/cts-regression /cts/cts-scheduler /cts/cts-schemas /cts/lab/CTS.py /cts/support/LSBDummy /cts/support/cts-support /cts/support/fence_dummy /cts/support/pacemaker-cts-dummyd /cts/support/pacemaker-cts-dummyd@.service /daemons/execd/pacemaker_remote /daemons/execd/pacemaker_remote.service /daemons/fenced/fence_legacy /daemons/fenced/fence_watchdog /daemons/pacemakerd/pacemaker.service /doc/Doxyfile /etc/init.d/pacemaker /etc/logrotate.d/pacemaker /etc/sysconfig/pacemaker /include/config.h /include/config.h.in /include/crm_config.h /maint/bumplibs /python/pacemaker/buildoptions.py /python/setup.py /tools/cluster-clean /tools/cluster-helper /tools/cluster-init /tools/crm_error /tools/crm_failcount /tools/crm_master /tools/crm_mon.service /tools/crm_report /tools/crm_rule /tools/crm_standby /tools/pcmk_simtimes /tools/report.collector /tools/report.common /xml/rng-helper # Compiled targets and intermediary files *.o *.pc *.pyc /daemons/attrd/pacemaker-attrd /daemons/based/pacemaker-based /daemons/controld/pacemaker-controld /daemons/execd/cts-exec-helper /daemons/execd/pacemaker-execd /daemons/execd/pacemaker-remoted /daemons/fenced/cts-fence-helper /daemons/fenced/pacemaker-fenced /daemons/pacemakerd/pacemakerd /daemons/schedulerd/pacemaker-schedulerd /devel/scratch /lib/gnu/stdalign.h /tools/attrd_updater /tools/cibadmin /tools/crmadmin /tools/crm_attribute /tools/crm_diff /tools/crm_mon /tools/crm_node /tools/crm_resource /tools/crm_shadow /tools/crm_simulate /tools/crm_ticket /tools/crm_verify /tools/iso8601 /tools/stonith_admin # Generated XML schema files /xml/crm_mon.rng /xml/pacemaker*.rng /xml/versions.rng /xml/api/api-result*.rng # Working directories for make dist and make export /pacemaker-[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9] # Documentation build targets and intermediary files *.7 *.7.xml *.7.html *.8 *.8.xml *.8.html GPATH GRTAGS GTAGS TAGS /daemons/fenced/pacemaker-fenced.xml /daemons/schedulerd/pacemaker-schedulerd.xml /doc/HTML /doc/abi/ /doc/abi-check /doc/api/ /doc/crm_fencing.html /doc/sphinx/*/_build /doc/sphinx/*/conf.py /doc/sphinx/*/generated /doc/sphinx/build-[0-9]*.txt # Test artifacts (from unit tests, regression tests, static analysis, etc.) *.coverity *.gcda *.gcno coverity-* pacemaker_*.info /coverage /cppcheck.out /cts/scheduler/bug-rh-1097457.log /cts/scheduler/bug-rh-1097457.trs /cts/scheduler/shadow.* /cts/schemas/test-*/ref/*.up* /cts/schemas/test-*/ref.err/*.up.err* /cts/test-suite.log /lib/*/fuzzers/*/*_fuzzer /lib/*/tests/*/*.log /lib/*/tests/*/*_test /lib/*/tests/*/*.trs /lib/common/tests/schemas/schemas /test/_test_file.c # Packaging artifacts *.rpm /pacemaker.spec /rpm/[A-LN-Z]* /rpm/build.counter /rpm/mock # Project maintainer artifacts /maint/gnulib /maint/mocked/based /maint/testcc_helper.cc /maint/testcc_*_h # Formerly built files (helps when jumping back and forth in checkout) /.ABI-build /Doxyfile /HTML /abi_dumps /abi-check /agents/ocf/o2cb /build.counter /compat_reports /compile /cts/.regression.failed.diff /attrd /cib /config.guess /config.sub /coverage.sh /crmd +/cts/cts /cts/CTS.py /cts/CTSlab.py /cts/CTSvars.py /cts/HBDummy /cts/LSBDummy /cts/OCFIPraTest.py /cts/cts-coverage /cts/cts-log-watcher /cts/cts-support /cts/fence_dummy /cts/lab/CTSlab.py /cts/lab/CTSvars.py /cts/lab/OCFIPraTest.py /cts/lab/cluster_test /cts/lab/cts /cts/lab/cts-log-watcher /cts/lxc_autogen.sh /cts/pacemaker-cts-dummyd /cts/pacemaker-cts-dummyd@.service /daemons/based/cibmon /daemons/fenced/fence_legacy /daemons/fenced/fence_watchdog /daemons/pacemakerd/pacemaker /daemons/pacemakerd/pacemaker.combined.upstart /daemons/pacemakerd/pacemaker.upstart /depcomp /doc/*.build /doc/*/en-US/Ap-*.xml /doc/*/en-US/Ch-*.xml /doc/*/publican.cfg /doc/*/publish /doc/*/tmp/** /doc/.ABI-build /doc/Clusters_from_Scratch.txt /doc/Pacemaker_Explained.txt /doc/abi_dumps /doc/acls.html /doc/compat_reports /doc/publican-catalog* /doc/shared/en-US/*.xml /doc/shared/en-US/images/pcmk-*.png /doc/shared/en-US/images/Policy-Engine-*.png /extra/*/* /fencing /include/stamp-* /install-sh /lib/common/md5.c /lib/common/tests/flags/pcmk__clear_flags_as /lib/common/tests/flags/pcmk__set_flags_as /lib/common/tests/flags/pcmk_all_flags_set /lib/common/tests/flags/pcmk_any_flags_set /lib/common/tests/operations/parse_op_key /lib/common/tests/strings/pcmk__btoa /lib/common/tests/strings/pcmk__parse_ll_range /lib/common/tests/strings/pcmk__scan_double /lib/common/tests/strings/pcmk__str_any_of /lib/common/tests/strings/pcmk__strcmp /lib/common/tests/strings/pcmk__char_in_any_str /lib/common/tests/utils/pcmk_str_is_infinity /lib/common/tests/utils/pcmk_str_is_minus_infinity /lib/gnu/libgnu.a /lib/pengine/tests/rules/ /lrmd /ltmain.sh /mcp /missing /mock /pacemaker-*.spec /pengine /py-compile /scratch /tools/cibsecret /tools/cluster-init /tools/crm_mon.upstart /test-driver /xml/assets /xml/crm.dtd /xml/version-diff.sh ylwrap pacemaker.sysusers_* diff --git a/configure.ac b/configure.ac index 87cb9bc005..454a104b3e 100644 --- a/configure.ac +++ b/configure.ac @@ -1,2139 +1,2138 @@ dnl dnl autoconf for Pacemaker dnl dnl Copyright 2009-2025 the Pacemaker project contributors dnl dnl The version control history for this file may have further details. dnl dnl This source code is licensed under the GNU General Public License version 2 dnl or later (GPLv2+) WITHOUT ANY WARRANTY. dnl ============================================== dnl Bootstrap autotools dnl ============================================== # Require a minimum version of autoconf itself AC_PREREQ(2.64) dnl AC_CONFIG_MACRO_DIR is deprecated as of autoconf 2.70 (2020-12-08). dnl Once we can require that version, we can simplify this, and no longer dnl need ACLOCAL_AMFLAGS in Makefile.am. m4_ifdef([AC_CONFIG_MACRO_DIRS], [AC_CONFIG_MACRO_DIRS([m4])], [AC_CONFIG_MACRO_DIR([m4])]) m4_include([m4/version.m4]) AC_INIT([pacemaker], VERSION_NUMBER, [users@clusterlabs.org], [pacemaker], PCMK_URL) LT_CONFIG_LTDL_DIR([libltdl]) AC_CONFIG_AUX_DIR([libltdl/config]) dnl Where #defines that autoconf makes (e.g. HAVE_whatever) go dnl dnl include/config.h dnl - Internal API dnl - Contains all defines dnl - include/config.h.in is generated automatically by autoheader dnl - Not to be included in any header files except crm_internal.h dnl (which is also not to be included in any other header files) dnl dnl include/crm_config.h dnl - External API dnl - Contains a subset of defines dnl - include/crm_config.h.in is manually edited to select the subset dnl - Should not include HAVE_* defines dnl - Safe to include anywhere AC_CONFIG_HEADERS([include/config.h include/crm_config.h]) dnl 1.13: minimum automake version required dnl foreign: don't require GNU-standard top-level files dnl tar-ustar: use (older) POSIX variant of generated tar rather than v7 dnl subdir-objects: keep .o's with their .c's (no-op in 2.0+) AM_INIT_AUTOMAKE([1.13 foreign tar-ustar subdir-objects]) dnl Require minimum version of pkg-config PKG_PROG_PKG_CONFIG(0.28) AS_IF([test x"${PKG_CONFIG}" != x""], [], [AC_MSG_FAILURE([Could not find required build tool pkg-config (0.28 or later)])]) PKG_INSTALLDIR PKG_NOARCH_INSTALLDIR dnl ============================================== dnl Compiler checks and helpers dnl ============================================== dnl A particular compiler can be forced by setting the CC environment variable AC_PROG_CC dnl C++ is needed only to run maintainer utilities, not to build AC_PROG_CXX dnl Use at least C99 if possible (automatic for autoconf >= 2.70) m4_version_prereq([2.70], [:], [AC_PROG_CC_STDC]) # cc_supports_flag # Return success if the C compiler supports the given flag cc_supports_flag() { local CFLAGS="-Werror $@" AC_MSG_CHECKING([whether $CC supports $@]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[ ]])], [RC=0; AC_MSG_RESULT([yes])], [RC=1; AC_MSG_RESULT([no])]) return $RC } # cc_temp_flags # Use the given flags for subsequent C compilation. These can be reverted to # what was used previously with cc_restore_flags. This allows certain tests to # use specific flags without affecting anything else. cc_temp_flags() { ac_save_CFLAGS="$CFLAGS" CFLAGS="$*" } # cc_restore_flags # Restore C compiler flags to what they were before the last cc_temp_flags # call. cc_restore_flags() { CFLAGS=$ac_save_CFLAGS } # Check for fatal warning support AS_IF([test $enable_fatal_warnings -ne $DISABLED dnl && test x"$GCC" = x"yes" && cc_supports_flag -Werror], [WERROR="-Werror"], [ WERROR="" AS_CASE([$enable_fatal_warnings], [$REQUIRED], [AC_MSG_ERROR([Compiler does not support fatal warnings])], [$OPTIONAL], [enable_fatal_warnings=$DISABLED]) ]) dnl ============================================== dnl Linker checks dnl ============================================== # Check whether linker supports --enable-new-dtags to use RUNPATH instead of # RPATH. It is necessary to do this before libtool does linker detection. # See also: https://github.com/kronosnet/kronosnet/issues/107 AX_CHECK_LINK_FLAG([-Wl,--enable-new-dtags], [AM_LDFLAGS=-Wl,--enable-new-dtags], [AC_MSG_ERROR(["Linker support for --enable-new-dtags is required"])]) AC_SUBST([AM_LDFLAGS]) saved_LDFLAGS="$LDFLAGS" LDFLAGS="$AM_LDFLAGS $LDFLAGS" LT_INIT([dlopen]) LDFLAGS="$saved_LDFLAGS" LTDL_INIT([convenience]) dnl ============================================== dnl Define configure options dnl ============================================== # yes_no_try # Map a yes/no/try user selection to $REQUIRED for yes, $DISABLED for no, and # $OPTIONAL for try. DISABLED=0 REQUIRED=1 OPTIONAL=2 yes_no_try() { local value AS_IF([test x"$1" = x""], [value="$2"], [value="$1"]) AS_CASE(["`echo "$value" | tr '[A-Z]' '[a-z]'`"], [0|no|false|disable], [return $DISABLED], [1|yes|true|enable], [return $REQUIRED], [try|check], [return $OPTIONAL] ) AC_MSG_ERROR([Invalid option value "$value"]) } # # Fix the defaults of certain built-in variables so they can be used in the # defaults for our custom arguments # AC_MSG_NOTICE([Sanitizing prefix: ${prefix}]) AS_IF([test x"$prefix" = x"NONE"], [ prefix=/usr dnl Fix default variables - "prefix" variable if not specified AS_IF([test x"$localstatedir" = x"\${prefix}/var"], [localstatedir="/var"]) AS_IF([test x"$sysconfdir" = x"\${prefix}/etc"], [sysconfdir="/etc"]) ]) AC_MSG_NOTICE([Sanitizing exec_prefix: ${exec_prefix}]) AS_CASE([$exec_prefix], [prefix|NONE], [exec_prefix=$prefix]) AC_MSG_NOTICE([Sanitizing libdir: ${libdir}]) AS_CASE([$libdir], [prefix|NONE], [ AC_MSG_CHECKING([which lib directory to use]) for aDir in lib64 lib do trydir="${exec_prefix}/${aDir}" AS_IF([test -d ${trydir}], [ libdir=${trydir} break ]) done AC_MSG_RESULT([$libdir]) ]) # Start a list of optional features this build supports PCMK_FEATURES="" dnl This section should include only the definition of configure script dnl options and determining their values. Processing should be done later when dnl possible, other than what's needed to determine values and defaults. dnl Per the autoconf docs, --enable-*/--disable-* options should control dnl features inherent to Pacemaker, while --with-*/--without-* options should dnl control the use of external software. However, --enable-*/--disable-* may dnl implicitly require additional external dependencies, and dnl --with-*/--without-* may implicitly enable or disable features, so the dnl line is blurry. dnl dnl We also use --with-* options for custom file, directory, and path dnl locations, since autoconf does not provide an option type for those. dnl --enable-* options: build process AC_ARG_ENABLE([quiet], [AS_HELP_STRING([--enable-quiet], [suppress make output unless there is an error @<:@no@:>@])] ) yes_no_try "$enable_quiet" "no" enable_quiet=$? AC_ARG_ENABLE([fatal-warnings], [AS_HELP_STRING([--enable-fatal-warnings], [enable pedantic and fatal warnings for gcc @<:@try@:>@])], ) yes_no_try "$enable_fatal_warnings" "try" enable_fatal_warnings=$? AC_ARG_ENABLE([hardening], [AS_HELP_STRING([--enable-hardening], [harden the resulting executables/libraries @<:@try@:>@])] ) yes_no_try "$enable_hardening" "try" enable_hardening=$? dnl --enable-* options: features within Pacemaker dnl @COMPAT This should be --with-systemd AC_ARG_ENABLE([systemd], [AS_HELP_STRING([--enable-systemd], [enable support for managing resources via systemd @<:@try@:>@])] ) yes_no_try "$enable_systemd" "try" enable_systemd=$? AC_ARG_ENABLE([deprecated-libs], [AS_HELP_STRING([--enable-deprecated-libs], [Build and install deprecated C libraries @<:@yes@:>@])] ) yes_no_try "$enable_deprecated_libs" "yes" enable_deprecated_libs=$? AM_CONDITIONAL([BUILD_DEPRECATED_LIBS], [test $enable_deprecated_libs -ne $DISABLED]) # AM_GNU_GETTEXT calls AM_NLS which defines the nls option, but it defaults # to enabled. We override the definition of AM_NLS to flip the default and mark # it as experimental in the help text. AC_DEFUN([AM_NLS], [AC_MSG_CHECKING([whether NLS is requested]) AC_ARG_ENABLE([nls], [AS_HELP_STRING([--enable-nls], [use Native Language Support (experimental)])], USE_NLS=$enableval, USE_NLS=no) AC_MSG_RESULT([$USE_NLS]) AC_SUBST([USE_NLS])] ) AM_GNU_GETTEXT([external]) AM_GNU_GETTEXT_VERSION([0.18]) dnl --with-* options: external software support, and custom values dnl This argument is defined via an M4 macro so default can be a variable AC_DEFUN([VERSION_ARG], [AC_ARG_WITH([version], [AS_HELP_STRING([--with-version=VERSION], [override package version @<:@$1@:>@])], [ PACEMAKER_VERSION="$withval" ], [ PACEMAKER_VERSION="$PACKAGE_VERSION" ])] ) VERSION_ARG(VERSION_NUMBER) CRM_DAEMON_USER="" AC_ARG_WITH([daemon-user], [AS_HELP_STRING([--with-daemon-user=USER], [user to run unprivileged Pacemaker daemons as (advanced option: changing this may break other cluster components unless similarly configured) @<:@hacluster@:>@])], [ CRM_DAEMON_USER="$withval" ] ) AS_IF([test x"${CRM_DAEMON_USER}" = x""], [CRM_DAEMON_USER="hacluster"]) CRM_DAEMON_GROUP="" AC_ARG_WITH([daemon-group], [AS_HELP_STRING([--with-daemon-group=GROUP], [group to run unprivileged Pacemaker daemons as (advanced option: changing this may break other cluster components unless similarly configured) @<:@haclient@:>@])], [ CRM_DAEMON_GROUP="$withval" ] ) AS_IF([test x"${CRM_DAEMON_GROUP}" = x""], [CRM_DAEMON_GROUP="haclient"]) BUG_URL="" AC_ARG_WITH([bug-url], [AS_HELP_STRING([--with-bug-url=DIR], m4_normalize([ address where users should submit bug reports @<:@https://bugs.clusterlabs.org/enter_bug.cgi?product=Pacemaker@:>@]))], [ BUG_URL="$withval" ] ) AS_IF([test x"${BUG_URL}" = x""], [BUG_URL="https://bugs.clusterlabs.org/enter_bug.cgi?product=Pacemaker"]) dnl @COMPAT This should be --enable-cibsecrets option AC_ARG_WITH([cibsecrets], [AS_HELP_STRING([--with-cibsecrets], [support separate file for CIB secrets @<:@no@:>@])] ) yes_no_try "$with_cibsecrets" "no" with_cibsecrets=$? PCMK__GNUTLS_PRIORITIES="NORMAL" AC_ARG_WITH([gnutls-priorities], [AS_HELP_STRING([--with-gnutls-priorities], [default GnuTLS cipher priorities @<:@NORMAL@:>@])], [ test x"$withval" = x"no" || PCMK__GNUTLS_PRIORITIES="$withval" ] ) AC_ARG_WITH([concurrent-fencing-default], [AS_HELP_STRING([--with-concurrent-fencing-default], m4_normalize([ default value for concurrent-fencing cluster option (deprecated) @<:@true@:>@]))], ) AS_CASE([$with_concurrent_fencing_default], [""], [with_concurrent_fencing_default="true"], [true], [], [false], [PCMK_FEATURES="$PCMK_FEATURES concurrent-fencing-default-false"], [AC_MSG_ERROR([Invalid value "$with_concurrent_fencing_default" for --with-concurrent-fencing-default])] ) AC_ARG_WITH([sbd-sync-default], [AS_HELP_STRING([--with-sbd-sync-default], m4_normalize([ default value used by sbd if SBD_SYNC_RESOURCE_STARTUP environment variable is not set @<:@false@:>@]))], ) AS_CASE([$with_sbd_sync_default], [""], [with_sbd_sync_default=false], [false], [], [true], [PCMK_FEATURES="$PCMK_FEATURES default-sbd-sync"], [AC_MSG_ERROR([Invalid value "$with_sbd_sync_default" for --with-sbd-sync-default])] ) AC_ARG_WITH([resource-stickiness-default], [AS_HELP_STRING([--with-resource-stickiness-default], [If positive, value to add to new CIBs as explicit resource default for resource-stickiness @<:@0@:>@])], ) errmsg="Invalid value \"$with_resource_stickiness_default\" for --with-resource-stickiness-default" AS_CASE([$with_resource_stickiness_default], [0|""], [with_resource_stickiness_default="0"], [*[[!0-9]]*], [AC_MSG_ERROR([$errmsg])], [PCMK_FEATURES="$PCMK_FEATURES default-resource-stickiness"] ) AC_ARG_WITH([corosync], [AS_HELP_STRING([--with-corosync], [support the Corosync messaging and membership layer @<:@try@:>@])] ) yes_no_try "$with_corosync" "try" with_corosync=$? dnl Get default from Corosync if possible PKG_CHECK_VAR([PCMK__COROSYNC_CONF], [corosync], [corosysconfdir], [PCMK__COROSYNC_CONF="$PCMK__COROSYNC_CONF/corosync.conf"], [PCMK__COROSYNC_CONF="${sysconfdir}/corosync/corosync.conf"]) AC_ARG_WITH([corosync-conf], [AS_HELP_STRING([--with-corosync-conf], m4_normalize([ location of Corosync configuration file @<:@value from Corosync package if available otherwise SYSCONFDIR/corosync/corosync.conf@:>@]))], [ PCMK__COROSYNC_CONF="$withval" ] ) dnl --with-* options: directory locations INITDIR="" AC_ARG_WITH([initdir], [AS_HELP_STRING([--with-initdir=DIR], m4_normalize([ directory for lsb resources (init scripts), or "try" to check for common locations, or "no" to disable] @<:@try@:>@))], [ INITDIR="$withval" ] ) AS_IF([test x"$INITDIR" = x""], [INITDIR="try"]) systemdsystemunitdir="${systemdsystemunitdir-}" AC_ARG_WITH([systemdsystemunitdir], [AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [directory for systemd unit files (advanced option: must match what systemd uses)])], [ systemdsystemunitdir="$withval" ] ) CONFIGDIR="" AC_ARG_WITH([configdir], [AS_HELP_STRING([--with-configdir=DIR], [directory for Pacemaker configuration file @<:@SYSCONFDIR/sysconfig@:>@])], [ CONFIGDIR="$withval" ] ) dnl --runstatedir is available as of autoconf 2.70 (2020-12-08). When users dnl have an older version, they can use our --with-runstatedir. pcmk_runstatedir="" AC_ARG_WITH([runstatedir], [AS_HELP_STRING([--with-runstatedir=DIR], [modifiable per-process data @<:@LOCALSTATEDIR/run@:>@ (ignored if --runstatedir is available)])], [ pcmk_runstatedir="$withval" ] ) CRM_LOG_DIR="" AC_ARG_WITH([logdir], [AS_HELP_STRING([--with-logdir=DIR], [directory for Pacemaker log file @<:@LOCALSTATEDIR/log/pacemaker@:>@])], [ CRM_LOG_DIR="$withval" ] ) CRM_BUNDLE_DIR="" AC_ARG_WITH([bundledir], [AS_HELP_STRING([--with-bundledir=DIR], [directory for Pacemaker bundle logs @<:@LOCALSTATEDIR/log/pacemaker/bundles@:>@])], [ CRM_BUNDLE_DIR="$withval" ] ) dnl Get default from resource-agents if possible. Otherwise, the default uses dnl /usr/lib rather than libdir because it's determined by the OCF project and dnl not Pacemaker. Even if a user wants to install Pacemaker to /usr/local or dnl such, the OCF agents will be expected in their usual location. However, we dnl do give the user the option to override it. PKG_CHECK_VAR([PCMK_OCF_ROOT], [resource-agents], [ocfrootdir], [], [PCMK_OCF_ROOT="/usr/lib/ocf"]) AC_ARG_WITH([ocfdir], [AS_HELP_STRING([--with-ocfdir=DIR], m4_normalize([ OCF resource agent root directory (advanced option: changing this may break other cluster components unless similarly configured) @<:@value from resource-agents package if available otherwise /usr/lib/ocf@:>@]))], [ PCMK_OCF_ROOT="$withval" ] ) dnl Get default from resource-agents if possible PKG_CHECK_VAR([PCMK__OCF_RA_PATH], [resource-agents], [ocfrapath], [], [PCMK__OCF_RA_PATH="$PCMK_OCF_ROOT/resource.d"]) AC_ARG_WITH([ocfrapath], [AS_HELP_STRING([--with-ocfrapath=DIR], m4_normalize([ OCF resource agent directories (colon-separated) to search @<:@value from resource-agents package if available otherwise OCFDIR/resource.d@:>@]))], [ PCMK__OCF_RA_PATH="$withval" ] ) OCF_RA_INSTALL_DIR="$PCMK_OCF_ROOT/resource.d" AC_ARG_WITH([ocfrainstalldir], [AS_HELP_STRING([--with-ocfrainstalldir=DIR], m4_normalize([ OCF installation directory for Pacemakers resource agents @<:@OCFDIR/resource.d@:>@]))], [ OCF_RA_INSTALL_DIR="$withval" ] ) dnl Get default from fence-agents if available PKG_CHECK_VAR([FA_PREFIX], [fence-agents], [prefix], [PCMK__FENCE_BINDIR="${FA_PREFIX}/sbin"], [PCMK__FENCE_BINDIR="$sbindir"]) AC_ARG_WITH([fence-bindir], [AS_HELP_STRING([--with-fence-bindir=DIR], m4_normalize([ directory for executable fence agents @<:@value from fence-agents package if available otherwise SBINDIR@:>@]))], [ PCMK__FENCE_BINDIR="$withval" ] ) dnl --with-* options: non-production testing AC_ARG_WITH([profiling], [AS_HELP_STRING([--with-profiling], [disable optimizations, for effective profiling @<:@no@:>@])] ) yes_no_try "$with_profiling" "no" with_profiling=$? AC_ARG_WITH([coverage], [AS_HELP_STRING([--with-coverage], [disable optimizations, for effective profiling and coverage testing @<:@no@:>@])] ) yes_no_try "$with_coverage" "no" with_coverage=$? AC_DEFINE_UNQUOTED([PCMK__WITH_COVERAGE], [$with_coverage], [Build with code coverage]) AM_CONDITIONAL([BUILD_COVERAGE], [test $with_coverage -ne $DISABLED]) AC_ARG_WITH([sanitizers], [AS_HELP_STRING([--with-sanitizers=...,...], [enable SANitizer build, do *NOT* use for production. Only ASAN/UBSAN/TSAN are currently supported])], [ SANITIZERS="$withval" ], [ SANITIZERS="" ]) dnl Environment variable options AC_ARG_VAR([CFLAGS_HARDENED_LIB], [extra C compiler flags for hardened libraries]) AC_ARG_VAR([LDFLAGS_HARDENED_LIB], [extra linker flags for hardened libraries]) AC_ARG_VAR([CFLAGS_HARDENED_EXE], [extra C compiler flags for hardened executables]) AC_ARG_VAR([LDFLAGS_HARDENED_EXE], [extra linker flags for hardened executables]) dnl ============================================== dnl Locate essential tools dnl ============================================== PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin" export PATH dnl Pacemaker's executable python scripts will invoke the python specified by dnl configure's PYTHON variable. If not specified, AM_PATH_PYTHON will check a dnl built-in list with (unversioned) "python" having precedence. To configure dnl Pacemaker to use a specific python interpreter version, define PYTHON dnl when calling configure, for example: ./configure PYTHON=/usr/bin/python3.6 dnl If PYTHON was specified, ensure it is an absolute path AS_IF([test x"${PYTHON}" != x""], [AC_PATH_PROG([PYTHON], [$PYTHON])]) dnl Require a minimum Python version AM_PATH_PYTHON([3.6]) AC_PROG_LN_S AC_PROG_MKDIR_P AC_PATH_PROG([GIT], [git], [false]) dnl Bash is needed for building man pages and running regression tests. dnl We set "BASH_PATH" because "BASH" is already an environment variable. REQUIRE_PROG([BASH_PATH], [bash]) AC_PATH_PROGS(PCMK__VALGRIND_EXEC, valgrind, /usr/bin/valgrind) AC_DEFINE_UNQUOTED(PCMK__VALGRIND_EXEC, "$PCMK__VALGRIND_EXEC", Valgrind command) dnl ============================================== dnl Package and schema versioning dnl ============================================== # Redefine PACKAGE_VERSION and VERSION according to PACEMAKER_VERSION in case # the user used --with-version. Unfortunately, this can only affect the # substitution variables and later uses in this file, not the config.h # constants, so we have to be careful to use only PACEMAKER_VERSION in C code. PACKAGE_VERSION=$PACEMAKER_VERSION VERSION=$PACEMAKER_VERSION AC_DEFINE_UNQUOTED(PACEMAKER_VERSION, "$VERSION", [Version number of this Pacemaker build]) AC_MSG_CHECKING([build version]) AS_IF([test "$GIT" != "false" && test -d .git], [ BUILD_VERSION=`"$GIT" log --pretty="format:%h" -n 1` AC_MSG_RESULT([$BUILD_VERSION (git hash)]) ], [ # The current directory name make a reasonable default # Most generated archives will include the hash or tag BASE=`basename $PWD` BUILD_VERSION=`echo $BASE | sed s:.*[[Pp]]acemaker-::` AC_MSG_RESULT([$BUILD_VERSION (directory name)]) ]) AC_DEFINE_UNQUOTED(BUILD_VERSION, "$BUILD_VERSION", Build version) AC_SUBST(BUILD_VERSION) # schema_files # List all manually edited RNG schemas (as opposed to auto-generated via make) # in the given directory. Use git if available to list managed RNGs, in case # there are leftover schema files from an earlier build of a different # version. Otherwise, check all RNGs. schema_files() { local files="$("$GIT" ls-files "$1"/*.rng 2>/dev/null)" AS_IF([test x"$files" = x""], [ files="$(ls -1 "$1"/*.rng | grep -E -v \ '/(pacemaker|api-result|crm_mon|versions)[^/]*\.rng')" ]) echo "$files" } # latest_schema_version # Determine highest RNG version in the given schema directory. latest_schema_version() { schema_files "$1" | sed -n -e 's/^.*-\([[0-9]][[0-9.]]*\).rng$/\1/p' dnl | sort -V | tail -1 } # schemas_for_make # Like schema_files, but suitable for use in make variables. schemas_for_make() { local file for file in $(schema_files "$1"); do AS_ECHO_N(["\$(top_srcdir)/$file "]) done } # Detect highest API schema version API_VERSION=$(latest_schema_version "xml/api") AC_DEFINE_UNQUOTED([PCMK__API_VERSION], ["$API_VERSION"], [Highest API schema version]) # Detect highest CIB schema version CIB_VERSION=$(latest_schema_version "xml") AC_SUBST(CIB_VERSION) # Re-run configure at next make if schema files change, to re-detect versions cib_schemas="$(schemas_for_make "xml")" api_schemas="$(schemas_for_make "xml/api")" CONFIG_STATUS_DEPENDENCIES="$cib_schemas $api_schemas" AC_SUBST(CONFIG_STATUS_DEPENDENCIES) dnl ============================================== dnl Process simple options dnl ============================================== AS_IF([test x"$enable_nls" = x"yes"], [PCMK_FEATURES="$PCMK_FEATURES nls"]) AS_IF([test x"$with_concurrent_fencing_default" = x"true"], [PCMK__CONCURRENT_FENCING_DEFAULT_TRUE="1"], [PCMK__CONCURRENT_FENCING_DEFAULT_TRUE="0"]) AC_DEFINE_UNQUOTED([PCMK__CONCURRENT_FENCING_DEFAULT_TRUE], [$PCMK__CONCURRENT_FENCING_DEFAULT_TRUE], [Whether concurrent-fencing cluster option default is true]) AC_DEFINE_UNQUOTED([PCMK__SBD_SYNC_DEFAULT], [$with_sbd_sync_default], [Default value for SBD_SYNC_RESOURCE_STARTUP environment variable]) AC_DEFINE_UNQUOTED([PCMK__RESOURCE_STICKINESS_DEFAULT], [$with_resource_stickiness_default], [Default value for resource-stickiness resource meta-attribute]) AS_IF([test x"${PCMK__GNUTLS_PRIORITIES}" != x""], [], [AC_MSG_ERROR([--with-gnutls-priorities value must not be empty])]) AC_DEFINE_UNQUOTED([PCMK__GNUTLS_PRIORITIES], ["$PCMK__GNUTLS_PRIORITIES"], [GnuTLS cipher priorities]) AC_SUBST(PCMK__GNUTLS_PRIORITIES) AC_SUBST(BUG_URL) AC_DEFINE_UNQUOTED([PCMK__BUG_URL], ["$BUG_URL"], [Where bugs should be reported]) AC_DEFINE_UNQUOTED([CRM_DAEMON_USER], ["$CRM_DAEMON_USER"], [User to run Pacemaker daemons as]) AC_SUBST(CRM_DAEMON_USER) AC_DEFINE_UNQUOTED([CRM_DAEMON_GROUP], ["$CRM_DAEMON_GROUP"], [Group to run Pacemaker daemons as]) AC_SUBST(CRM_DAEMON_GROUP) dnl ============================================== dnl Process file paths dnl ============================================== # expand_path_option [] # Given the name of a file path variable, expand any variable references # inside it, use the specified default if it is not specified, and ensure it # is a full path. expand_path_option() { # The first argument is the variable *name* (not value) ac_path_varname="$1" # Get the original value of the variable ac_path_value=$(eval echo "\${${ac_path_varname}}") # Expand any literal variable expressions in the value so that we don't # end up with something like '${prefix}' in #defines etc. # # Autoconf deliberately leaves values unexpanded to allow overriding # the configure script choices in make commands (for example, # "make exec_prefix=/foo install"). No longer being able to do this seems # like no great loss. eval ac_path_value=$(eval echo "${ac_path_value}") # Use (expanded) default if necessary AS_IF([test x"${ac_path_value}" = x""], [eval ac_path_value=$(eval echo "$2")]) # Require a full path AS_CASE(["$ac_path_value"], [/*], [eval ${ac_path_varname}="$ac_path_value"], [*], [AC_MSG_ERROR([$ac_path_varname value "$ac_path_value" is not a full path])] ) } dnl Expand values of autoconf-provided directory options expand_path_option prefix expand_path_option exec_prefix expand_path_option bindir expand_path_option sbindir expand_path_option libexecdir expand_path_option datarootdir expand_path_option datadir expand_path_option sysconfdir expand_path_option sharedstatedir expand_path_option localstatedir expand_path_option libdir expand_path_option includedir expand_path_option oldincludedir expand_path_option infodir expand_path_option mandir AC_DEFUN([AC_DATAROOTDIR_CHECKED]) dnl Expand values of custom directory options AS_IF([test x"$INITDIR" = x"try"], [ AC_MSG_CHECKING([for an init directory]) INITDIR=no for initdir in /etc/init.d /etc/rc.d/init.d /sbin/init.d \ /usr/local/etc/rc.d /etc/rc.d ${sysconfdir}/init.d do AS_IF([test -d $initdir], [ INITDIR=$initdir break ]) done AC_MSG_RESULT([$INITDIR]) ]) support_lsb=$DISABLED AM_CONDITIONAL([BUILD_LSB], [test x"${INITDIR}" != x"no"]) AM_COND_IF([BUILD_LSB], [ support_lsb=$REQUIRED expand_path_option INITDIR PCMK_FEATURES="$PCMK_FEATURES lsb" ], [ INITDIR="" ]) AC_SUBST(INITDIR) AC_DEFINE_UNQUOTED([PCMK__ENABLE_LSB], [$support_lsb], [Whether to support LSB resource agents]) AC_DEFINE_UNQUOTED([PCMK__LSB_INIT_DIR], ["$INITDIR"], [Location for LSB init scripts]) expand_path_option localedir "${datadir}/locale" AC_DEFINE_UNQUOTED([PCMK__LOCALE_DIR],["$localedir"], [Base directory for message catalogs]) AS_IF([test x"${runstatedir}" = x""], [runstatedir="${pcmk_runstatedir}"]) expand_path_option runstatedir "${localstatedir}/run" AC_DEFINE_UNQUOTED([PCMK__RUN_DIR], ["$runstatedir"], [Location for modifiable per-process data]) AC_SUBST(runstatedir) expand_path_option docdir "${datadir}/doc/${PACKAGE}-${VERSION}" AC_SUBST(docdir) expand_path_option CONFIGDIR "${sysconfdir}/sysconfig" AC_SUBST(CONFIGDIR) expand_path_option PCMK__COROSYNC_CONF "${sysconfdir}/corosync/corosync.conf" AC_SUBST(PCMK__COROSYNC_CONF) expand_path_option CRM_LOG_DIR "${localstatedir}/log/pacemaker" AC_DEFINE_UNQUOTED([CRM_LOG_DIR], ["$CRM_LOG_DIR"], [Location for Pacemaker log file]) AC_SUBST(CRM_LOG_DIR) expand_path_option CRM_BUNDLE_DIR "${localstatedir}/log/pacemaker/bundles" AC_DEFINE_UNQUOTED([CRM_BUNDLE_DIR], ["$CRM_BUNDLE_DIR"], [Location for Pacemaker bundle logs]) AC_SUBST(CRM_BUNDLE_DIR) expand_path_option PCMK__FENCE_BINDIR AC_SUBST(PCMK__FENCE_BINDIR) AC_DEFINE_UNQUOTED([PCMK__FENCE_BINDIR], ["$PCMK__FENCE_BINDIR"], [Location for executable fence agents]) expand_path_option PCMK_OCF_ROOT AC_SUBST(PCMK_OCF_ROOT) AC_DEFINE_UNQUOTED([PCMK_OCF_ROOT], ["$PCMK_OCF_ROOT"], [OCF root directory for resource agents and libraries]) expand_path_option PCMK__OCF_RA_PATH AC_SUBST(PCMK__OCF_RA_PATH) AC_DEFINE_UNQUOTED([PCMK__OCF_RA_PATH], ["$PCMK__OCF_RA_PATH"], [OCF directories to search for resource agents ]) expand_path_option OCF_RA_INSTALL_DIR AC_SUBST(OCF_RA_INSTALL_DIR) # Derived paths PCMK_SCHEMA_DIR="${datadir}/pacemaker" AC_DEFINE_UNQUOTED([PCMK_SCHEMA_DIR], ["$PCMK_SCHEMA_DIR"], [Location for the Pacemaker Relax-NG Schema]) AC_SUBST(PCMK_SCHEMA_DIR) PCMK__REMOTE_SCHEMA_DIR="${localstatedir}/lib/pacemaker/schemas" AC_DEFINE_UNQUOTED([PCMK__REMOTE_SCHEMA_DIR], ["$PCMK__REMOTE_SCHEMA_DIR"], [Location to store Relax-NG Schema files on remote nodes]) AC_SUBST(PCMK__REMOTE_SCHEMA_DIR) CRM_CORE_DIR="${localstatedir}/lib/pacemaker/cores" AC_DEFINE_UNQUOTED([CRM_CORE_DIR], ["$CRM_CORE_DIR"], [Directory Pacemaker daemons should change to (without systemd, core files will go here)]) AC_SUBST(CRM_CORE_DIR) PCMK__PERSISTENT_DATA_DIR="${localstatedir}/lib/pacemaker" AC_DEFINE_UNQUOTED([PCMK__PERSISTENT_DATA_DIR], ["$PCMK__PERSISTENT_DATA_DIR"], [Location to store directory produced by Pacemaker daemons]) AC_SUBST(PCMK__PERSISTENT_DATA_DIR) CRM_BLACKBOX_DIR="${localstatedir}/lib/pacemaker/blackbox" AC_DEFINE_UNQUOTED([CRM_BLACKBOX_DIR], ["$CRM_BLACKBOX_DIR"], [Where to keep blackbox dumps]) AC_SUBST(CRM_BLACKBOX_DIR) PCMK_SCHEDULER_INPUT_DIR="${localstatedir}/lib/pacemaker/pengine" AC_DEFINE_UNQUOTED([PCMK_SCHEDULER_INPUT_DIR], ["$PCMK_SCHEDULER_INPUT_DIR"], [Where to keep scheduler outputs]) AC_SUBST(PCMK_SCHEDULER_INPUT_DIR) CRM_CONFIG_DIR="${localstatedir}/lib/pacemaker/cib" AC_DEFINE_UNQUOTED([CRM_CONFIG_DIR], ["$CRM_CONFIG_DIR"], [Where to keep configuration files]) AC_SUBST(CRM_CONFIG_DIR) CRM_DAEMON_DIR="${libexecdir}/pacemaker" AC_DEFINE_UNQUOTED([CRM_DAEMON_DIR], ["$CRM_DAEMON_DIR"], [Location for Pacemaker daemons]) AC_SUBST(CRM_DAEMON_DIR) CRM_STATE_DIR="${runstatedir}/crm" AC_DEFINE_UNQUOTED([CRM_STATE_DIR], ["$CRM_STATE_DIR"], [Where to keep state files and sockets]) AC_SUBST(CRM_STATE_DIR) PCMK__OCF_TMP_DIR="${runstatedir}/resource-agents" AC_DEFINE_UNQUOTED([PCMK__OCF_TMP_DIR], ["$PCMK__OCF_TMP_DIR"], [Where resource agents should keep state files]) AC_SUBST(PCMK__OCF_TMP_DIR) PACEMAKER_CONFIG_DIR="${sysconfdir}/pacemaker" AC_DEFINE_UNQUOTED([PACEMAKER_CONFIG_DIR], ["$PACEMAKER_CONFIG_DIR"], [Where to keep configuration files like authkey]) AC_SUBST(PACEMAKER_CONFIG_DIR) # Fedora >=42 makes /usr/sbin a symlink to /usr/bin. It updates the RPM macros # to set _sbindir to "${_exec_prefix}/bin", the same value as _bindir. # Previously it was set to "${_exec_prefix}/sbin". (Note that because of the # symlink, paths beginning with /usr/sbin remain valid.) # # This causes problems with bundle resources. Pacemaker automatically generates # a configuration for the bundle's container resource. If the bundle contains a # primitive and the container's run-command attribute is unset, the generated # container resource has its run_cmd attribute set to # SBIN_DIR "/" PCMK__SERVER_REMOTED, which is intended as a reasonable default. # If SBIN_DIR becomes "/usr/bin" instead of "/usr/sbin", at least two problems # can occur: # 1. The container resource's digest changes compared to the digest in the # resource history entry. Pacemaker interprets this as a configuration # change and restarts the container resource. # 2. If the container is running a different OS distro or an older version of # Fedora, then the new /usr/bin/pacemaker-remoted path may be invalid; the # executable was installed at /usr/sbin/pacemaker-remoted, which is NOT a # symlink to /usr/bin path. In this case, the container fails to start. # # We override the value only for the SBIN_DIR constant, which is used only for # the sbd path and the default pacemaker-remoted path. There is no need to # override sbindir, which would affect installation directories. # # There is no more specific way than the below, to detect whether the build # system has this /usr/sbin vs. /usr/bin change in effect. Thus corner cases are # possible when sbindir/bindir are manually specified or in distros with # atypical defaults. # # At time of writing, autoconf is unchanged. However, we perform the override # here instead of in the spec file, in case autoconf changes in the future. # # Note that other distros (for example, RHEL) are likely to incorporate these # changes in the future. # # References: # * https://fedoraproject.org/wiki/Changes/Unify_bin_and_sbin # * https://bodhi.fedoraproject.org/updates/FEDORA-2025-da0a082e66 # * https://discussion.fedoraproject.org/t/144562 AS_IF([test x"$sbindir" = x"$bindir" \ && test x"$sbindir" = x"${exec_prefix}/bin"], [SBIN_DIR="${exec_prefix}/sbin"], [SBIN_DIR="$sbindir"]) AC_DEFINE_UNQUOTED([SBIN_DIR], ["$SBIN_DIR"], [Location for system binaries]) # Warn about any directories that don't exist (which may be OK) for j in prefix exec_prefix bindir sbindir libexecdir datadir sysconfdir \ sharedstatedir localstatedir libdir includedir oldincludedir infodir \ mandir INITDIR docdir CONFIGDIR localedir SBIN_DIR do dirname=`eval echo '${'${j}'}'` AS_IF([test -n "$dirname" && test ! -d "$dirname"], [AC_MSG_WARN([$j directory ($dirname) does not exist (yet)])]) done dnl =============================================== dnl General Processing dnl =============================================== us_auth= AC_CHECK_HEADER([sys/socket.h], [ AC_CHECK_DECL([SO_PEERCRED], [ # Linux AC_CHECK_TYPE([struct ucred], [ us_auth=peercred_ucred; AC_DEFINE([HAVE_UCRED], [1], [Define if Unix socket auth method is getsockopt(s, SO_PEERCRED, &ucred, ...)]) ], [ # OpenBSD AC_CHECK_TYPE([struct sockpeercred], [ us_auth=localpeercred_sockepeercred; AC_DEFINE([HAVE_SOCKPEERCRED], [1], [Define if Unix socket auth method is getsockopt(s, SO_PEERCRED, &sockpeercred, ...)]) ], [], [[#include ]]) ], [[#define _GNU_SOURCE #include ]]) ], [], [[#include ]]) ]) AS_IF([test -z "${us_auth}"], [ # FreeBSD AC_CHECK_DECL([getpeereid], [ us_auth=getpeereid; AC_DEFINE([HAVE_GETPEEREID], [1], [Define if Unix socket auth method is getpeereid(s, &uid, &gid)]) ], [ # Solaris/OpenIndiana AC_CHECK_DECL([getpeerucred], [ us_auth=getpeerucred; AC_DEFINE([HAVE_GETPEERUCRED], [1], [Define if Unix socket auth method is getpeercred(s, &ucred)]) ], [ AC_MSG_FAILURE([No way to authenticate a Unix socket peer]) ], [[#include ]]) ]) ]) dnl OS-based decision-making is poor autotools practice; feature-based dnl mechanisms are strongly preferred. Keep this section to a bare minimum; dnl regard as a "necessary evil". dnl Set host_os and host_cpu AC_CANONICAL_HOST INIT_EXT="" PROCFS=0 dnl Solaris and some *BSD versions support procfs but not files we need AS_CASE(["$host_os"], [*bsd*], [INIT_EXT=".sh"], [*linux*], [PROCFS=1], [darwin*], [ LIBS="$LIBS -L${prefix}/lib" CFLAGS="$CFLAGS -I${prefix}/include" ]) AC_SUBST(INIT_EXT) AM_CONDITIONAL([SUPPORT_PROCFS], [test $PROCFS -eq 1]) AC_DEFINE_UNQUOTED([HAVE_LINUX_PROCFS], [$PROCFS], [Define to 1 if procfs is supported]) AS_CASE(["$host_cpu"], [ppc64|powerpc64], [ AS_CASE([$CFLAGS], [*powerpc64*], [], [*], [AS_IF([test x"$GCC" = x"yes"], [CFLAGS="$CFLAGS -m64"]) ]) ]) dnl ============================================== dnl Documentation build dependencies and checks dnl ============================================== AC_PATH_PROG([HELP2MAN], [help2man]) AC_PATH_PROG([SPHINX], [sphinx-build]) AC_PATH_PROG([XSLTPROC], [xsltproc]) AC_PATH_PROG([XMLCATALOG], [xmlcatalog]) AM_CONDITIONAL(BUILD_HELP, test x"${HELP2MAN}" != x"") AS_IF([test x"${HELP2MAN}" != x""], [PCMK_FEATURES="$PCMK_FEATURES generated-manpages"]) MANPAGE_XSLT="" AS_IF([test x"${XSLTPROC}" != x""], [ AC_MSG_CHECKING([for DocBook-to-manpage transform]) # first try to figure out correct template using xmlcatalog query, # resort to extensive (semi-deterministic) file search if that fails DOCBOOK_XSL_URI='http://docbook.sourceforge.net/release/xsl/current' DOCBOOK_XSL_PATH='manpages/docbook.xsl' MANPAGE_XSLT=$(${XMLCATALOG} "" ${DOCBOOK_XSL_URI}/${DOCBOOK_XSL_PATH} \ | sed -n 's|^file://||p;q') AS_IF([test x"${MANPAGE_XSLT}" = x""], [ DIRS=$(find "${datadir}" -name $(basename $(dirname ${DOCBOOK_XSL_PATH})) \ -type d 2>/dev/null | LC_ALL=C sort) XSLT=$(basename ${DOCBOOK_XSL_PATH}) for d in ${DIRS} do AS_IF([test -f "${d}/${XSLT}"], [ MANPAGE_XSLT="${d}/${XSLT}" break ]) done ]) ]) AC_MSG_RESULT([$MANPAGE_XSLT]) AC_SUBST(MANPAGE_XSLT) AM_CONDITIONAL(BUILD_XML_HELP, test x"${MANPAGE_XSLT}" != x"") AS_IF([test x"${MANPAGE_XSLT}" != x""], [PCMK_FEATURES="$PCMK_FEATURES agent-manpages"]) AM_CONDITIONAL([BUILD_SPHINX_DOCS], [test x"${SPHINX}" != x""]) AM_COND_IF([BUILD_SPHINX_DOCS], [PCMK_FEATURES="$PCMK_FEATURES books"]) dnl Pacemaker's shell scripts (and thus man page builders) rely on GNU getopt AC_MSG_CHECKING([for GNU-compatible getopt]) IFS_orig=$IFS IFS=: for PATH_DIR in $PATH do IFS=$IFS_orig GETOPT_PATH="${PATH_DIR}/getopt" AS_IF([test -f "$GETOPT_PATH" && test -x "$GETOPT_PATH"], [ $GETOPT_PATH -T >/dev/null 2>/dev/null AS_IF([test $? -eq 4], [break]) ]) GETOPT_PATH="" done IFS=$IFS_orig AS_IF([test -n "$GETOPT_PATH"], [AC_MSG_RESULT([$GETOPT_PATH])], [ AC_MSG_RESULT([no]) AC_MSG_ERROR([Could not find required build tool GNU-compatible getopt]) ]) AC_SUBST([GETOPT_PATH]) dnl =============================================== dnl Libraries dnl =============================================== AC_SEARCH_LIBS([socket], [socket]) save_LIBS="$LIBS" DL_LIBS="" LIBS="" AC_SEARCH_LIBS([dlopen], [dl], [test "$ac_cv_search_dlopen" = "none required" || DL_LIBS="$LIBS"]) AC_SUBST(DL_LIBS) LIBS="$save_LIBS" save_LIBS="$LIBS" PAM_LIBS="" LIBS="" AC_SEARCH_LIBS([pam_start], [pam], [test "$ac_cv_search_pam_start" = "none required" || PAM_LIBS="$LIBS"]) AC_SUBST(PAM_LIBS) LIBS="$save_LIBS" PKG_CHECK_MODULES([UUID], [uuid], [CPPFLAGS="${CPPFLAGS} ${UUID_CFLAGS}" LIBS="${LIBS} ${UUID_LIBS}"]) # Require minimum glib version PKG_CHECK_MODULES([GLIB], [glib-2.0 >= 2.42.0], [CPPFLAGS="${CPPFLAGS} ${GLIB_CFLAGS}" LIBS="${LIBS} ${GLIB_LIBS}"]) # Check whether high-resolution sleep function is available AC_CHECK_FUNCS([nanosleep usleep]) PKG_CHECK_MODULES(LIBXML2, [libxml-2.0 >= 2.9.2], [CPPFLAGS="${CPPFLAGS} ${LIBXML2_CFLAGS}" LIBS="${LIBS} ${LIBXML2_LIBS}"]) AC_PATH_PROGS(XMLLINT_PATH, xmllint, /usr/bin/xmllint) AC_DEFINE_UNQUOTED(XMLLINT_PATH, "$XMLLINT_PATH", xmllint command) REQUIRE_LIB([xslt], [xsltApplyStylesheet]) dnl ======================================================================== dnl Headers dnl ======================================================================== # Some distributions insert #warnings into deprecated headers. If we will # enable fatal warnings for the build, then enable them for the header checks # as well, otherwise the build could fail even though the header check # succeeds. (We should probably be doing this in more places.) cc_temp_flags "$CFLAGS $WERROR" # Optional headers (inclusion of these should be conditional in C code) AC_CHECK_HEADERS([sys/signalfd.h]) AC_CHECK_HEADERS([uuid/uuid.h]) AC_CHECK_HEADERS([security/pam_appl.h pam/pam_appl.h]) AS_IF([test x"$ac_cv_lib_pam_pam_start" = x"yes"], AS_IF([test x"$ac_cv_header_security_pam_appl_h" = x"yes" dnl || test x"$ac_cv_header_pam_pam_appl_h" = x"yes"], [PCMK_FEATURES="$PCMK_FEATURES pam"])) # Required headers REQUIRE_HEADER([arpa/inet.h]) REQUIRE_HEADER([ctype.h]) REQUIRE_HEADER([dirent.h]) REQUIRE_HEADER([dlfcn.h]) REQUIRE_HEADER([errno.h]) REQUIRE_HEADER([fcntl.h]) REQUIRE_HEADER([float.h]) REQUIRE_HEADER([glib.h]) REQUIRE_HEADER([grp.h]) REQUIRE_HEADER([inttypes.h]) REQUIRE_HEADER([libgen.h]) REQUIRE_HEADER([limits.h]) REQUIRE_HEADER([locale.h]) REQUIRE_HEADER([netdb.h]) REQUIRE_HEADER([netinet/in.h]) REQUIRE_HEADER([netinet/ip.h], [ #include #include ]) REQUIRE_HEADER([netinet/tcp.h]) REQUIRE_HEADER([pwd.h]) REQUIRE_HEADER([regex.h]) REQUIRE_HEADER([sched.h]) REQUIRE_HEADER([signal.h]) REQUIRE_HEADER([stdarg.h]) REQUIRE_HEADER([stdbool.h]) REQUIRE_HEADER([stdint.h]) REQUIRE_HEADER([stdio.h]) REQUIRE_HEADER([stdlib.h]) REQUIRE_HEADER([string.h]) REQUIRE_HEADER([strings.h]) REQUIRE_HEADER([sys/ioctl.h]) REQUIRE_HEADER([sys/param.h]) REQUIRE_HEADER([sys/reboot.h]) REQUIRE_HEADER([sys/resource.h]) REQUIRE_HEADER([sys/socket.h]) REQUIRE_HEADER([sys/stat.h]) REQUIRE_HEADER([sys/time.h]) REQUIRE_HEADER([sys/types.h]) REQUIRE_HEADER([sys/uio.h]) REQUIRE_HEADER([sys/utsname.h]) REQUIRE_HEADER([sys/wait.h]) REQUIRE_HEADER([termios.h]) REQUIRE_HEADER([time.h]) REQUIRE_HEADER([unistd.h]) REQUIRE_HEADER([libxml/xpath.h]) REQUIRE_HEADER([libxslt/xslt.h]) cc_restore_flags dnl ======================================================================== dnl Generic declarations dnl ======================================================================== AC_CHECK_DECLS([CLOCK_MONOTONIC], [PCMK_FEATURES="$PCMK_FEATURES monotonic"], [], [[ #include ]]) dnl ======================================================================== dnl Unit test declarations dnl ======================================================================== AC_CHECK_DECLS([assert_float_equal], [], [], [[ #include #include #include #include ]]) dnl ======================================================================== dnl Byte size dnl ======================================================================== # Compile-time assert hack # https://jonjagger.blogspot.com/2017/07/compile-time-assertions-in-c.html AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ switch (0) { case 0: case (CHAR_BIT == 8): break; } ]])], [], [AC_MSG_FAILURE(m4_normalize([Pacemaker is not supported on platforms where char is not 8 bits]))]) dnl ======================================================================== dnl Structures dnl ======================================================================== AC_CHECK_MEMBERS([struct tm.tm_gmtoff],,,[[#include ]]) dnl ======================================================================== dnl Functions dnl ======================================================================== REQUIRE_FUNC([alphasort]) REQUIRE_FUNC([getopt]) REQUIRE_FUNC([scandir]) REQUIRE_FUNC([sched_getscheduler]) REQUIRE_FUNC([setenv]) REQUIRE_FUNC([strndup]) REQUIRE_FUNC([strnlen]) REQUIRE_FUNC([unsetenv]) REQUIRE_FUNC([uuid_unparse]) REQUIRE_FUNC([vasprintf]) AC_CHECK_FUNCS([strchrnul]) AC_CHECK_FUNCS([fopen64]) AM_CONDITIONAL([WRAPPABLE_FOPEN64], [test x"$ac_cv_func_fopen64" = x"yes"]) AC_MSG_CHECKING([whether strerror always returns non-NULL]) AC_RUN_IFELSE([AC_LANG_PROGRAM([[ #include #include ]], [[ return strerror(-1) == NULL; ]])], [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([strerror() is not C99-compliant])], [AC_MSG_ERROR([strerror() is not C99-compliant])]) AC_RUN_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ const char *s = "some-command-line-arg"; char *name = NULL; int n = sscanf(s, "%ms", &name); return n != 1; ]])], [have_sscanf_m="yes"], [have_sscanf_m="no"], [have_sscanf_m="no"]) AS_IF([test x"$have_sscanf_m" = x"yes"], [AC_DEFINE([HAVE_SSCANF_M], [1], [Define to 1 if sscanf %m modifier is available])]) dnl ======================================================================== dnl bzip2 dnl ======================================================================== REQUIRE_HEADER([bzlib.h]) REQUIRE_LIB([bz2], [BZ2_bzBuffToBuffCompress]) dnl ======================================================================== dnl sighandler_t is missing from Illumos, Solaris11 systems dnl ======================================================================== AC_MSG_CHECKING([for sighandler_t]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[sighandler_t *f;]])], [ AC_MSG_RESULT([yes]) AC_DEFINE([HAVE_SIGHANDLER_T], [1], [Define to 1 if sighandler_t is available]) ], [AC_MSG_RESULT([no])]) dnl ======================================================================== dnl ncurses dnl ======================================================================== dnl dnl A few OSes (e.g. Linux) deliver a default "ncurses" alongside "curses". dnl Many non-Linux deliver "curses"; sites may add "ncurses". dnl dnl However, the source-code recommendation for both is to #include "curses.h" dnl (i.e. "ncurses" still wants the include to be simple, no-'n', "curses.h"). dnl dnl ncurses takes precedence. dnl AC_CHECK_HEADERS([curses.h curses/curses.h ncurses.h ncurses/ncurses.h]) save_LIBS="$LIBS" found_curses=0 CURSES_LIBS="" LIBS="" AC_SEARCH_LIBS([printw], [ncurses curses], [test "$ac_cv_search_printw" = "none required" || CURSES_LIBS="$LIBS" found_curses=1], [found_curses=0]) LIBS="$save_LIBS" dnl Check for printw() prototype compatibility AS_IF([test $found_curses -eq 1 && cc_supports_flag -Wcast-qual], [ ac_save_LIBS="$LIBS" LIBS="$CURSES_LIBS" # avoid broken test because of hardened build environment in Fedora 23+ # - https://fedoraproject.org/wiki/Changes/Harden_All_Packages # - https://bugzilla.redhat.com/1297985 AS_IF([cc_supports_flag -fPIC], [cc_temp_flags "-Wcast-qual $WERROR -fPIC"], [cc_temp_flags "-Wcast-qual $WERROR"]) AC_MSG_CHECKING([whether curses library is compatible]) AC_LINK_IFELSE( [AC_LANG_PROGRAM([ #if defined(HAVE_NCURSES_H) # include #elif defined(HAVE_NCURSES_NCURSES_H) # include #elif defined(HAVE_CURSES_H) # include #elif defined(HAVE_CURSES_CURSES_H) # include #endif ], [printw((const char *)"Test");] )], [AC_MSG_RESULT([yes]) PCMK_FEATURES="$PCMK_FEATURES ncurses" ], [ found_curses=0 CURSES_LIBS="" AC_MSG_RESULT([no]) AC_MSG_WARN(m4_normalize([Disabling curses because the printw() function of your (n)curses library is old. If you wish to enable curses, update to a newer version (ncurses 5.4 or later is recommended, available from https://invisible-island.net/ncurses/) ])) ] ) LIBS="$ac_save_LIBS" cc_restore_flags ]) AC_DEFINE_UNQUOTED([PCMK__ENABLE_CURSES], [$found_curses], [have ncurses library]) AC_SUBST(CURSES_LIBS) dnl ======================================================================== dnl Profiling and GProf dnl ======================================================================== CFLAGS_ORIG="$CFLAGS" AS_IF([test $with_coverage -ne $DISABLED], [ with_profiling=$REQUIRED PCMK_FEATURES="$PCMK_FEATURES coverage" CFLAGS="$CFLAGS -fprofile-arcs -ftest-coverage" dnl During linking, make sure to specify -lgcov or -coverage ] ) AS_IF([test $with_profiling -ne $DISABLED], [ with_profiling=$REQUIRED PCMK_FEATURES="$PCMK_FEATURES profile" dnl Disable various compiler optimizations CFLAGS="$CFLAGS -fno-omit-frame-pointer -fno-inline -fno-builtin" dnl CFLAGS="$CFLAGS -fno-inline-functions" dnl CFLAGS="$CFLAGS -fno-default-inline" dnl CFLAGS="$CFLAGS -fno-inline-functions-called-once" dnl CFLAGS="$CFLAGS -fno-optimize-sibling-calls" dnl Turn off optimization so tools can get accurate line numbers CFLAGS=`echo $CFLAGS | sed \ -e 's/-O.\ //g' \ -e 's/-Wp,-D_FORTIFY_SOURCE=.\ //g' \ -e 's/-D_FORTIFY_SOURCE=.\ //g'` CFLAGS="$CFLAGS -O0 -g3 -gdwarf-2" AC_MSG_NOTICE([CFLAGS before adding profiling options: $CFLAGS_ORIG]) AC_MSG_NOTICE([CFLAGS after: $CFLAGS]) ] ) AM_CONDITIONAL([BUILD_PROFILING], [test "$with_profiling" = "$REQUIRED"]) dnl ======================================================================== dnl Cluster infrastructure - LibQB dnl ======================================================================== PKG_CHECK_MODULES([libqb], [libqb >= 1.0.1]) CPPFLAGS="$libqb_CFLAGS $CPPFLAGS" LIBS="$libqb_LIBS $LIBS" dnl libqb 2.0.5+ (2022-03) AC_CHECK_FUNCS([qb_ipcc_connect_async]) dnl libqb 2.0.2+ (2020-10) AC_CHECK_FUNCS([qb_ipcc_auth_get]) dnl libqb 2.0.0+ (2020-05) dnl also defines QB_FEATURE_LOG_HIRES_TIMESTAMPS CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_MAX_LINE_LEN]) CHECK_ENUM_VALUE([qb/qblog.h],[qb_log_conf],[QB_LOG_CONF_ELLIPSIS]) dnl Support Linux-HA fence agents if available AS_IF([test x"$cross_compiling" != x"yes"], [CPPFLAGS="$CPPFLAGS -I${prefix}/include/heartbeat"]) AC_CHECK_HEADERS([stonith/stonith.h], [ save_LIBS="$LIBS" STONITH_LIBS="" LIBS="" AC_SEARCH_LIBS([PILLoadPlugin], [pils], [test "$ac_cv_search_PILLoadPlugin" = "none required" || STONITH_LIBS="$LIBS"]) LIBS="" AC_SEARCH_LIBS([G_main_add_IPC_Channel], [plumb], [test "$ac_cv_search_G_main_add_IPC_Channel" = "none required" || STONITH_LIBS="$STONITH_LIBS $LIBS"]) AC_SUBST(STONITH_LIBS) LIBS="$save_LIBS" PCMK_FEATURES="$PCMK_FEATURES lha" ]) AM_CONDITIONAL([BUILD_LHA_SUPPORT], [test x"$ac_cv_header_stonith_stonith_h" = x"yes"]) dnl =============================== dnl Detect DBus and systemd support dnl =============================== HAVE_dbus=0 PC_NAME_DBUS="" PKG_CHECK_MODULES([DBUS],[dbus-1 >= 1.5.12], [ HAVE_dbus=1 PC_NAME_DBUS="dbus-1" CPPFLAGS="${CPPFLAGS} ${DBUS_CFLAGS}" ],[]) AC_DEFINE_UNQUOTED(HAVE_DBUS, $HAVE_dbus, Support dbus) AC_SUBST(PC_NAME_DBUS) check_systemdsystemunitdir() { AC_MSG_CHECKING([which system unit file directory to use]) PKG_CHECK_VAR([systemdsystemunitdir], [systemd], [systemdsystemunitdir]) AC_MSG_RESULT([${systemdsystemunitdir}]) test x"$systemdsystemunitdir" != x"" return $? } AS_CASE([$enable_systemd], [$REQUIRED], [ AS_IF([test $HAVE_dbus = 0], [AC_MSG_FAILURE([Cannot support systemd resources without DBus])]) AS_IF([test "$ac_cv_have_decl_CLOCK_MONOTONIC" = "no"], [AC_MSG_FAILURE([Cannot support systemd resources without monotonic clock])]) AS_IF([check_systemdsystemunitdir], [], [AC_MSG_FAILURE([Cannot support systemd resources without systemdsystemunitdir])]) ], [$OPTIONAL], [ AS_IF([test $HAVE_dbus = 0 \ || test x"$ac_cv_have_decl_CLOCK_MONOTONIC" = x"no"], [enable_systemd=$DISABLED], [ AC_MSG_CHECKING([for systemd version (using dbus-send)]) ret=$({ dbus-send --system --print-reply \ --dest=org.freedesktop.systemd1 \ /org/freedesktop/systemd1 \ org.freedesktop.DBus.Properties.Get \ string:org.freedesktop.systemd1.Manager \ string:Version 2>/dev/null \ || echo "version unavailable"; } | tail -n1) # sanitize output a bit (interested just in value, not type), # ret is intentionally unenquoted so as to normalize whitespace ret=$(echo ${ret} | cut -d' ' -f2-) AC_MSG_RESULT([${ret}]) AS_IF([test x"$ret" != x"unavailable" \ || systemctl --version 2>/dev/null | grep -q systemd], [ AS_IF([check_systemdsystemunitdir], [enable_systemd=$REQUIRED], [enable_systemd=$DISABLED]) ], [enable_systemd=$DISABLED] ) ]) ], ) AC_MSG_CHECKING([whether to enable support for managing resources via systemd]) AS_IF([test $enable_systemd -eq $DISABLED], [AC_MSG_RESULT([no])], [ AC_MSG_RESULT([yes]) PCMK_FEATURES="$PCMK_FEATURES systemd" ] ) AC_SUBST([systemdsystemunitdir]) AC_DEFINE_UNQUOTED([SUPPORT_SYSTEMD], [$enable_systemd], [Support systemd resources]) AM_CONDITIONAL([BUILD_SYSTEMD], [test $enable_systemd = $REQUIRED]) AC_SUBST(SUPPORT_SYSTEMD) STACKS="" CLUSTERLIBS="" PC_NAME_CLUSTER="" dnl ======================================================================== dnl Detect support for "service" alias dnl ======================================================================== PCMK__ENABLE_SERVICE=$DISABLED AM_COND_IF([BUILD_LSB], [PCMK__ENABLE_SERVICE=$REQUIRED]) AM_COND_IF([BUILD_SYSTEMD], [PCMK__ENABLE_SERVICE=$REQUIRED]) AS_IF([test $PCMK__ENABLE_SERVICE -ne $DISABLED], [PCMK_FEATURES="$PCMK_FEATURES service"]) AC_SUBST(PCMK__ENABLE_SERVICE) AC_DEFINE_UNQUOTED([PCMK__ENABLE_SERVICE], [$PCMK__ENABLE_SERVICE], [Whether "service" is supported as an agent standard]) dnl ======================================================================== dnl Cluster stack - Corosync dnl ======================================================================== COROSYNC_LIBS="" AS_CASE([$with_corosync], [$REQUIRED], [ # These will be fatal if unavailable PKG_CHECK_MODULES([cpg], [libcpg]) PKG_CHECK_MODULES([cfg], [libcfg]) PKG_CHECK_MODULES([cmap], [libcmap]) PKG_CHECK_MODULES([quorum], [libquorum]) PKG_CHECK_MODULES([libcorosync_common], [libcorosync_common]) ] [$OPTIONAL], [ PKG_CHECK_MODULES([cpg], [libcpg], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([cfg], [libcfg], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([cmap], [libcmap], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([quorum], [libquorum], [], [with_corosync=$DISABLED]) PKG_CHECK_MODULES([libcorosync_common], [libcorosync_common], [], [with_corosync=$DISABLED]) AS_IF([test $with_corosync -ne $DISABLED], [with_corosync=$REQUIRED]) ] ) AS_IF([test $with_corosync -ne $DISABLED], [ AC_MSG_CHECKING([for Corosync 2 or later]) AC_MSG_RESULT([yes]) CFLAGS="$CFLAGS $libqb_CFLAGS $cpg_CFLAGS $cfg_CFLAGS $cmap_CFLAGS $quorum_CFLAGS $libcorosync_common_CFLAGS" CPPFLAGS="$CPPFLAGS `$PKG_CONFIG --cflags-only-I corosync`" COROSYNC_LIBS="$COROSYNC_LIBS $cpg_LIBS $cfg_LIBS $cmap_LIBS $quorum_LIBS $libcorosync_common_LIBS" CLUSTERLIBS="$CLUSTERLIBS $COROSYNC_LIBS" PC_NAME_CLUSTER="$PC_CLUSTER_NAME libcfg libcmap libcorosync_common libcpg libquorum" STACKS="$STACKS corosync-ge-2" dnl Shutdown tracking added (back) to corosync Jan 2021 saved_LIBS="$LIBS" LIBS="$LIBS $COROSYNC_LIBS" AC_CHECK_FUNCS([corosync_cfg_trackstart]) LIBS="$saved_LIBS" ] ) AC_DEFINE_UNQUOTED([SUPPORT_COROSYNC], [$with_corosync], [Support the Corosync messaging and membership layer]) AM_CONDITIONAL([BUILD_CS_SUPPORT], [test $with_corosync -eq $REQUIRED]) AC_SUBST([SUPPORT_COROSYNC]) dnl dnl Cluster stack - Sanity dnl AS_IF([test x"$STACKS" != x""], [AC_MSG_NOTICE([Supported stacks:${STACKS}])], [AC_MSG_FAILURE([At least one cluster stack must be supported])]) PCMK_FEATURES="${PCMK_FEATURES}${STACKS}" AC_SUBST(CLUSTERLIBS) AC_SUBST(PC_NAME_CLUSTER) dnl ======================================================================== dnl CIB secrets dnl ======================================================================== AS_IF([test $with_cibsecrets -ne $DISABLED], [ with_cibsecrets=$REQUIRED PCMK_FEATURES="$PCMK_FEATURES cibsecrets" PCMK__CIB_SECRETS_DIR="${localstatedir}/lib/pacemaker/lrm/secrets" AC_DEFINE_UNQUOTED([PCMK__CIB_SECRETS_DIR], ["$PCMK__CIB_SECRETS_DIR"], [Location for CIB secrets]) AC_SUBST([PCMK__CIB_SECRETS_DIR]) ] ) AC_DEFINE_UNQUOTED([PCMK__ENABLE_CIBSECRETS], [$with_cibsecrets], [Support CIB secrets]) AM_CONDITIONAL([BUILD_CIBSECRETS], [test $with_cibsecrets -eq $REQUIRED]) dnl ======================================================================== dnl GnuTLS dnl ======================================================================== PKG_CHECK_MODULES(GNUTLS, [gnutls >= 3.4.6], [CPPFLAGS="${CPPFLAGS} ${GNUTLS_CFLAGS}" LIBS="${LIBS} ${GNUTLS_LIBS}"]) # --- ASAN/UBSAN/TSAN (see man gcc) --- # when using SANitizers, we need to pass the -fsanitize.. # to both CFLAGS and LDFLAGS. The CFLAGS/LDFLAGS must be # specified as first in the list or there will be runtime # issues (for example user has to LD_PRELOAD asan for it to work # properly). AS_IF([test -n "${SANITIZERS}"], [ SANITIZERS=$(echo $SANITIZERS | sed -e 's/,/ /g') for SANITIZER in $SANITIZERS do AS_CASE([$SANITIZER], [asan|ASAN], [ SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=address" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=address -lasan" PCMK_FEATURES="$PCMK_FEATURES asan" REQUIRE_LIB([asan],[main]) ], [ubsan|UBSAN], [ SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=undefined" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=undefined -lubsan" PCMK_FEATURES="$PCMK_FEATURES ubsan" REQUIRE_LIB([ubsan],[main]) ], [tsan|TSAN], [ SANITIZERS_CFLAGS="$SANITIZERS_CFLAGS -fsanitize=thread" SANITIZERS_LDFLAGS="$SANITIZERS_LDFLAGS -fsanitize=thread -ltsan" PCMK_FEATURES="$PCMK_FEATURES tsan" REQUIRE_LIB([tsan],[main]) ]) done ]) dnl ======================================================================== dnl Compiler flags dnl ======================================================================== dnl Make sure that CFLAGS is not exported. If the user did dnl not have CFLAGS in their environment then this should have dnl no effect. However if CFLAGS was exported from the user's dnl environment, then the new CFLAGS will also be exported dnl to sub processes. AS_IF([export | fgrep " CFLAGS=" > /dev/null], [ SAVED_CFLAGS="$CFLAGS" unset CFLAGS CFLAGS="$SAVED_CFLAGS" unset SAVED_CFLAGS ]) CC_EXTRAS="" AS_IF([test x"$GCC" != x"yes"], [CFLAGS="$CFLAGS -g"], [ CFLAGS="$CFLAGS -ggdb" dnl When we don't have diagnostic push / pull, we can't explicitly disable dnl checking for nonliteral formats in the places where they occur on purpose dnl thus we disable nonliteral format checking globally as we are aborting dnl on warnings. dnl what makes the things really ugly is that nonliteral format checking is dnl obviously available as an extra switch in very modern gcc but for older dnl gcc this is part of -Wformat=2 dnl so if we have push/pull we can enable -Wformat=2 -Wformat-nonliteral dnl if we don't have push/pull but -Wformat-nonliteral we can enable -Wformat=2 dnl otherwise none of both gcc_diagnostic_push_pull=no cc_temp_flags "$CFLAGS $WERROR" AC_MSG_CHECKING([for gcc diagnostic push / pull]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #pragma GCC diagnostic push #pragma GCC diagnostic pop ]])], [ AC_MSG_RESULT([yes]) gcc_diagnostic_push_pull=yes ], AC_MSG_RESULT([no])) cc_restore_flags AS_IF([cc_supports_flag "-Wformat-nonliteral"], [gcc_format_nonliteral=yes], [gcc_format_nonliteral=no]) # We had to eliminate -Wnested-externs because of libtool changes # Make sure to order options so that the former stand for prerequisites # of the latter (e.g., -Wformat-nonliteral requires -Wformat). EXTRA_FLAGS="-fgnu89-inline" EXTRA_FLAGS="$EXTRA_FLAGS -Wall" EXTRA_FLAGS="$EXTRA_FLAGS -Waggregate-return" EXTRA_FLAGS="$EXTRA_FLAGS -Wbad-function-cast" EXTRA_FLAGS="$EXTRA_FLAGS -Wcast-align" EXTRA_FLAGS="$EXTRA_FLAGS -Wdeclaration-after-statement" EXTRA_FLAGS="$EXTRA_FLAGS -Wendif-labels" EXTRA_FLAGS="$EXTRA_FLAGS -Wfloat-equal" EXTRA_FLAGS="$EXTRA_FLAGS -Wformat-security" EXTRA_FLAGS="$EXTRA_FLAGS -Wimplicit-fallthrough" EXTRA_FLAGS="$EXTRA_FLAGS -Wmissing-prototypes" EXTRA_FLAGS="$EXTRA_FLAGS -Wmissing-declarations" EXTRA_FLAGS="$EXTRA_FLAGS -Wnested-externs" EXTRA_FLAGS="$EXTRA_FLAGS -Wno-long-long" EXTRA_FLAGS="$EXTRA_FLAGS -Wno-strict-aliasing" EXTRA_FLAGS="$EXTRA_FLAGS -Wpointer-arith" EXTRA_FLAGS="$EXTRA_FLAGS -Wstrict-prototypes" EXTRA_FLAGS="$EXTRA_FLAGS -Wwrite-strings" EXTRA_FLAGS="$EXTRA_FLAGS -Wunused-but-set-variable" EXTRA_FLAGS="$EXTRA_FLAGS -Wunsigned-char" AS_IF([test x"$gcc_diagnostic_push_pull" = x"yes"], [ AC_DEFINE([HAVE_FORMAT_NONLITERAL], [], [gcc can complain about nonliterals in format]) EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2 -Wformat-nonliteral" ], [test x"$gcc_format_nonliteral" = x"yes"], [EXTRA_FLAGS="$EXTRA_FLAGS -Wformat=2"]) # Additional warnings it might be nice to enable one day # -Wshadow # -Wunreachable-code for j in $EXTRA_FLAGS do AS_IF([cc_supports_flag $CC_EXTRAS $j], [CC_EXTRAS="$CC_EXTRAS $j"]) done AC_MSG_NOTICE([Using additional gcc flags: ${CC_EXTRAS}]) ]) dnl dnl Hardening flags dnl dnl The prime control of whether to apply (targeted) hardening build flags and dnl which ones is --{enable,disable}-hardening option passed to ./configure: dnl dnl --enable-hardening=try (default): dnl depending on whether any of CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE, dnl CFLAGS_HARDENED_LIB or LDFLAGS_HARDENED_LIB environment variables dnl (see below) is set and non-null, all these custom flags (even if not dnl set) are used as are, otherwise the best effort is made to offer dnl reasonably strong hardening in several categories (RELRO, PIE, dnl "bind now", stack protector) according to what the selected toolchain dnl can offer dnl dnl --enable-hardening: dnl same effect as --enable-hardening=try when the environment variables dnl in question are suppressed dnl dnl --disable-hardening: dnl do not apply any targeted hardening measures at all dnl dnl The user-injected environment variables that regulate the hardening in dnl default case are as follows: dnl dnl * CFLAGS_HARDENED_EXE, LDFLAGS_HARDENED_EXE dnl compiler and linker flags (respectively) for daemon programs dnl (pacemakerd, pacemaker-attrd, pacemaker-controld, pacemaker-execd, dnl pacemaker-based, pacemaker-fenced, pacemaker-remoted, dnl pacemaker-schedulerd) dnl dnl * CFLAGS_HARDENED_LIB, LDFLAGS_HARDENED_LIB dnl compiler and linker flags (respectively) for libraries linked dnl with the daemon programs dnl dnl Note that these are purposedly targeted variables (addressing particular dnl targets all over the scattered Makefiles) and have no effect outside of dnl the predestined scope (e.g., CLI utilities). For a global reach, dnl use CFLAGS, LDFLAGS, etc. as usual. dnl dnl For guidance on the suitable flags consult, for instance: dnl https://fedoraproject.org/wiki/Changes/Harden_All_Packages#Detailed_Harden_Flags_Description dnl https://owasp.org/index.php/C-Based_Toolchain_Hardening#GCC.2FBinutils dnl AS_IF([test $enable_hardening -eq $OPTIONAL], [ AS_IF([test "$(env | grep -Ec '^(C|LD)FLAGS_HARDENED_(EXE|LIB)=.')" = 0], [enable_hardening=$REQUIRED], [AC_MSG_NOTICE([Hardening: using custom flags from environment])] ) ], [ unset CFLAGS_HARDENED_EXE unset CFLAGS_HARDENED_LIB unset LDFLAGS_HARDENED_EXE unset LDFLAGS_HARDENED_LIB ] ) AS_CASE([$enable_hardening], [$DISABLED], [AC_MSG_NOTICE([Hardening: explicitly disabled])], [$REQUIRED], [ CFLAGS_HARDENED_EXE= CFLAGS_HARDENED_LIB= LDFLAGS_HARDENED_EXE= LDFLAGS_HARDENED_LIB= relro=0 pie=0 bindnow=0 stackprot="none" # daemons incl. libs: partial RELRO flag="-Wl,-z,relro" CC_CHECK_LDFLAGS(["${flag}"], [ LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}" relro=1 ]) # daemons: PIE for both CFLAGS and LDFLAGS AS_IF([cc_supports_flag -fPIE], [ flag="-pie" CC_CHECK_LDFLAGS(["${flag}"], [ CFLAGS_HARDENED_EXE="${CFLAGS_HARDENED_EXE} -fPIE" LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" pie=1 ]) ] ) # daemons incl. libs: full RELRO if sensible + as-needed linking # so as to possibly mitigate startup performance # hit caused by excessive linking with unneeded # libraries AS_IF([test "${relro}" = 1 && test "${pie}" = 1], [ flag="-Wl,-z,now" CC_CHECK_LDFLAGS(["${flag}"], [ LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}" bindnow=1 ]) ] ) AS_IF([test "${bindnow}" = 1], [ flag="-Wl,--as-needed" CC_CHECK_LDFLAGS(["${flag}"], [ LDFLAGS_HARDENED_EXE="${LDFLAGS_HARDENED_EXE} ${flag}" LDFLAGS_HARDENED_LIB="${LDFLAGS_HARDENED_LIB} ${flag}" ]) ]) # universal: prefer strong > all > default stack protector if possible flag= AS_IF([cc_supports_flag -fstack-protector-strong], [ flag="-fstack-protector-strong" stackprot="strong" ], [cc_supports_flag -fstack-protector-all], [ flag="-fstack-protector-all" stackprot="all" ], [cc_supports_flag -fstack-protector], [ flag="-fstack-protector" stackprot="default" ] ) AS_IF([test -n "${flag}"], [CC_EXTRAS="${CC_EXTRAS} ${flag}"]) # universal: enable stack clash protection if possible AS_IF([cc_supports_flag -fstack-clash-protection], [ CC_EXTRAS="${CC_EXTRAS} -fstack-clash-protection" AS_IF([test "${stackprot}" = "none"], [stackprot="clash-only"], [stackprot="${stackprot}+clash"] ) ] ) # Log a summary AS_IF([test "${relro}" = 1 || test "${pie}" = 1 || test x"${stackprot}" != x"none"], [AC_MSG_NOTICE(m4_normalize([Hardening: relro=${relro} pie=${pie} bindnow=${bindnow} stackprot=${stackprot}])) ], [AC_MSG_WARN([Hardening: no suitable features in the toolchain detected])] ) ], ) CFLAGS="$SANITIZERS_CFLAGS $CFLAGS $CC_EXTRAS" LDFLAGS="$SANITIZERS_LDFLAGS $LDFLAGS" CFLAGS_HARDENED_EXE="$SANITIZERS_CFLAGS $CFLAGS_HARDENED_EXE" LDFLAGS_HARDENED_EXE="$SANITIZERS_LDFLAGS $LDFLAGS_HARDENED_EXE" NON_FATAL_CFLAGS="$CFLAGS" AC_SUBST(NON_FATAL_CFLAGS) dnl dnl We reset CFLAGS to include our warnings *after* all function dnl checking goes on, so that our warning flags don't keep the dnl AC_*FUNCS() calls above from working. In particular, -Werror will dnl *always* cause us troubles if we set it before here. dnl dnl AS_IF([test $enable_fatal_warnings -ne $DISABLED], [ AC_MSG_NOTICE([Enabling fatal compiler warnings]) CFLAGS="$CFLAGS $WERROR" ]) AC_SUBST(CFLAGS) dnl This is useful for use in Makefiles that need to remove one specific flag CFLAGS_COPY="$CFLAGS" AC_SUBST(CFLAGS_COPY) AC_SUBST(LIBADD_DL) dnl extra flags for dynamic linking libraries AC_SUBST(LOCALE) dnl Options for cleaning up the compiler output AS_IF([test $enable_quiet -ne $DISABLED], [ AC_MSG_NOTICE([Suppressing make details]) QUIET_LIBTOOL_OPTS="--silent" QUIET_MAKE_OPTS="-s" # POSIX compliant ], [ QUIET_LIBTOOL_OPTS="" QUIET_MAKE_OPTS="" ] ) dnl Put the above variables to use LIBTOOL="${LIBTOOL} --tag=CC \$(QUIET_LIBTOOL_OPTS)" MAKEFLAGS="${MAKEFLAGS} ${QUIET_MAKE_OPTS}" # Make features list available (sorted alphabetically, without leading space) PCMK_FEATURES=`echo "$PCMK_FEATURES" | sed -e 's/^ //' -e 's/ /\n/g' | sort | xargs` AC_DEFINE_UNQUOTED(CRM_FEATURES, "$PCMK_FEATURES", Set of enabled features) AC_SUBST(PCMK_FEATURES) AC_SUBST(CC) AC_SUBST(MAKEFLAGS) AC_SUBST(LIBTOOL) AC_SUBST(QUIET_LIBTOOL_OPTS) dnl Files we output that need to be executable CONFIG_FILES_EXEC([agents/ocf/ClusterMon], [agents/ocf/Dummy], [agents/ocf/HealthCPU], [agents/ocf/HealthIOWait], [agents/ocf/HealthSMART], [agents/ocf/Stateful], [agents/ocf/SysInfo], [agents/ocf/attribute], [agents/ocf/controld], [agents/ocf/ifspeed], [agents/ocf/ping], [agents/ocf/remote], [agents/stonith/fence_legacy], [agents/stonith/fence_watchdog], [cts/cluster_test], - [cts/cts], [cts/cts-attrd], [cts/cts-cli], [cts/cts-exec], [cts/cts-fencing], [cts/cts-lab], [cts/cts-regression], [cts/cts-scheduler], [cts/cts-schemas], [cts/benchmark/clubench], [cts/support/LSBDummy], [cts/support/cts-support], [cts/support/fence_dummy], [cts/support/pacemaker-cts-dummyd], [doc/abi-check], [maint/bumplibs], [tools/cluster-clean], [tools/cluster-helper], [tools/crm_failcount], [tools/crm_master], [tools/crm_report], [tools/crm_standby], [tools/pcmk_simtimes], [xml/rng-helper]) dnl Other files we output AC_CONFIG_FILES(Makefile \ agents/Makefile \ agents/alerts/Makefile \ agents/ocf/Makefile \ agents/stonith/Makefile \ cts/Makefile \ cts/benchmark/Makefile \ cts/scheduler/Makefile \ cts/scheduler/dot/Makefile \ cts/scheduler/exp/Makefile \ cts/scheduler/scores/Makefile \ cts/scheduler/stderr/Makefile \ cts/scheduler/summary/Makefile \ cts/scheduler/xml/Makefile \ cts/support/Makefile \ cts/support/pacemaker-cts-dummyd@.service \ daemons/Makefile \ daemons/attrd/Makefile \ daemons/based/Makefile \ daemons/controld/Makefile \ daemons/execd/Makefile \ daemons/execd/pacemaker_remote \ daemons/execd/pacemaker_remote.service \ daemons/fenced/Makefile \ daemons/pacemakerd/Makefile \ daemons/pacemakerd/pacemaker.service \ daemons/schedulerd/Makefile \ devel/Makefile \ doc/Doxyfile \ doc/Makefile \ doc/sphinx/Makefile \ etc/Makefile \ etc/init.d/pacemaker \ etc/logrotate.d/pacemaker \ etc/sysconfig/pacemaker \ include/Makefile \ include/crm/Makefile \ include/crm/cib/Makefile \ include/crm/common/Makefile \ include/crm/cluster/Makefile \ include/crm/fencing/Makefile \ include/crm/pengine/Makefile \ include/pcmki/Makefile \ lib/Makefile \ lib/cib/Makefile \ lib/cluster/Makefile \ lib/cluster/tests/Makefile \ lib/cluster/tests/cluster/Makefile \ lib/cluster/tests/cpg/Makefile \ lib/common/Makefile \ lib/common/tests/Makefile \ lib/common/tests/acl/Makefile \ lib/common/tests/actions/Makefile \ lib/common/tests/agents/Makefile \ lib/common/tests/cmdline/Makefile \ lib/common/tests/digest/Makefile \ lib/common/tests/flags/Makefile \ lib/common/tests/health/Makefile \ lib/common/tests/io/Makefile \ lib/common/tests/iso8601/Makefile \ lib/common/tests/lists/Makefile \ lib/common/tests/messages/Makefile \ lib/common/tests/nodes/Makefile \ lib/common/tests/nvpair/Makefile \ lib/common/tests/options/Makefile \ lib/common/tests/output/Makefile \ lib/common/tests/patchset/Makefile \ lib/common/tests/probes/Makefile \ lib/common/tests/procfs/Makefile \ lib/common/tests/resources/Makefile \ lib/common/tests/results/Makefile \ lib/common/tests/rules/Makefile \ lib/common/tests/scheduler/Makefile \ lib/common/tests/schemas/Makefile \ lib/common/tests/scores/Makefile \ lib/common/tests/strings/Makefile \ lib/common/tests/utils/Makefile \ lib/common/tests/xml/Makefile \ lib/common/tests/xml_comment/Makefile \ lib/common/tests/xml_element/Makefile \ lib/common/tests/xml_idref/Makefile \ lib/common/tests/xpath/Makefile \ lib/fencing/Makefile \ lib/libpacemaker.pc \ lib/lrmd/Makefile \ lib/pacemaker/Makefile \ lib/pacemaker/tests/Makefile \ lib/pacemaker/tests/pcmk_resource/Makefile \ lib/pacemaker/tests/pcmk_ticket/Makefile \ lib/pacemaker.pc \ lib/pacemaker-cib.pc \ lib/pacemaker-cluster.pc \ lib/pacemaker-fencing.pc \ lib/pacemaker-lrmd.pc \ lib/pacemaker-service.pc \ lib/pacemaker-pe_rules.pc \ lib/pacemaker-pe_status.pc \ lib/pengine/Makefile \ lib/pengine/tests/Makefile \ lib/pengine/tests/native/Makefile \ lib/pengine/tests/status/Makefile \ lib/pengine/tests/unpack/Makefile \ lib/pengine/tests/utils/Makefile \ lib/services/Makefile \ maint/Makefile \ po/Makefile.in \ python/Makefile \ python/setup.py \ python/pacemaker/Makefile \ python/pacemaker/_cts/Makefile \ python/pacemaker/_cts/tests/Makefile \ python/pacemaker/buildoptions.py \ python/tests/Makefile \ rpm/Makefile \ tests/Makefile \ tools/Makefile \ tools/crm_mon.service \ tools/report.collector \ tools/report.common \ xml/Makefile \ xml/pacemaker-schemas.pc \ ) dnl Now process the entire list of files added by previous dnl calls to AC_CONFIG_FILES() AC_OUTPUT() dnl ***************** dnl Configure summary dnl ***************** AC_MSG_NOTICE([]) AC_MSG_NOTICE([$PACKAGE configuration:]) AC_MSG_NOTICE([ Version = ${VERSION} (Build: $BUILD_VERSION)]) AC_MSG_NOTICE([ Features = ${PCMK_FEATURES}]) AC_MSG_NOTICE([]) AC_MSG_NOTICE([ Prefix = ${prefix}]) AC_MSG_NOTICE([ Executables = ${sbindir}]) AC_MSG_NOTICE([ Man pages = ${mandir}]) AC_MSG_NOTICE([ Libraries = ${libdir}]) AC_MSG_NOTICE([ Header files = ${includedir}]) AC_MSG_NOTICE([ Arch-independent files = ${datadir}]) AC_MSG_NOTICE([ State information = ${localstatedir}]) AC_MSG_NOTICE([ System configuration = ${sysconfdir}]) AC_MSG_NOTICE([ OCF agents = ${PCMK_OCF_ROOT}]) AM_COND_IF([BUILD_LSB], [AC_MSG_NOTICE([ LSB agents = ${INITDIR}])]) AC_MSG_NOTICE([]) AC_MSG_NOTICE([ HA group name = ${CRM_DAEMON_GROUP}]) AC_MSG_NOTICE([ HA user name = ${CRM_DAEMON_USER}]) AC_MSG_NOTICE([]) AC_MSG_NOTICE([ CFLAGS = ${CFLAGS}]) AC_MSG_NOTICE([ CFLAGS_HARDENED_EXE = ${CFLAGS_HARDENED_EXE}]) AC_MSG_NOTICE([ CFLAGS_HARDENED_LIB = ${CFLAGS_HARDENED_LIB}]) AC_MSG_NOTICE([ LDFLAGS_HARDENED_EXE = ${LDFLAGS_HARDENED_EXE}]) AC_MSG_NOTICE([ LDFLAGS_HARDENED_LIB = ${LDFLAGS_HARDENED_LIB}]) AC_MSG_NOTICE([ Libraries = ${LIBS}]) AC_MSG_NOTICE([ Stack Libraries = ${CLUSTERLIBS}]) AC_MSG_NOTICE([ Unix socket auth method = ${us_auth}]) diff --git a/cts/Makefile.am b/cts/Makefile.am index 3ad7d204fe..af61cc72fc 100644 --- a/cts/Makefile.am +++ b/cts/Makefile.am @@ -1,80 +1,77 @@ # # Copyright 2001-2025 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # include $(top_srcdir)/mk/common.mk include $(top_srcdir)/mk/python.mk # Test commands and globally applicable test files should be in $(testdir), # and command-specific test data should be in a command-specific subdirectory. testdir = $(datadir)/$(PACKAGE)/tests test_SCRIPTS = cts-attrd \ cts-cli \ cts-exec \ cts-fencing \ cts-lab \ cts-regression \ cts-scheduler \ cts-schemas dist_test_DATA = README.md \ valgrind-pcmk.suppressions clidir = $(testdir)/cli dist_cli_DATA = $(wildcard cli/*.xml cli/*.exp) -ctsdir = $(datadir)/$(PACKAGE)/tests/cts -cts_SCRIPTS = cts - schemasdir = $(testdir)/schemas dist_schemas_DATA = $(wildcard schemas/*/ref/*.ref*) \ $(wildcard schemas/*/ref.err/*.ref.err*) \ $(wildcard schemas/*/xml/*.xml) noinst_SCRIPTS = cluster_test .PHONY: scheduler-list scheduler-list: @for T in "$(srcdir)"/scheduler/xml/*.xml; do \ echo $$(basename $$T .xml); \ done CLEANFILES = $(builddir)/.regression.failed.diff .PHONY: clean-local clean-local: rm -f scheduler/*/*.pe rm -f schemas/*/*.up{,.err} SUBDIRS = benchmark \ scheduler \ support .PHONY: cts-support-install cts-support-install: $(MAKE) $(AM_MAKEFLAGS) -C support cts-support $(builddir)/support/cts-support install .PHONY: cts-support-uninstall cts-support-uninstall: $(MAKE) $(AM_MAKEFLAGS) -C support cts-support $(builddir)/support/cts-support uninstall # Everything listed here is a python script, typically generated from a .in file # (though that is not a requirement). We want to run pylint on all of these # things after they've been built. # FIXME: When cts-schemas is converted to python, this can be removed because # it will duplicate test_SCRIPTS above. python_files = cts-attrd \ cts-cli \ cts-exec \ cts-fencing \ cts-lab \ cts-regression \ cts-scheduler PYCHECKFILES ?= $(python_files) diff --git a/cts/README.md b/cts/README.md index 63165aff00..e97351e233 100644 --- a/cts/README.md +++ b/cts/README.md @@ -1,311 +1,309 @@ # Pacemaker Cluster Test Suite (CTS) The Cluster Test Suite (CTS) refers to all Pacemaker testing code that can be run in an installed environment. (Pacemaker also has unit tests that must be run from a source distribution.) CTS includes: * Regression tests: These test specific Pacemaker components individually (no integration tests). The primary front end is cts-regression in this directory. Run it with the --help option to see its usage. cts-regression is a wrapper for individual component regression tests also in this directory (cts-cli, cts-exec, cts-fencing, and cts-scheduler). The CLI and scheduler regression tests can also be run from a source distribution. The other regression tests can only run in an installed environment, and the cluster should not be running on the node running these tests. * The CTS lab: This is a cluster exerciser for intensively testing the behavior of an entire working cluster. It is primarily for developers and packagers of the Pacemaker source code, but it can be useful for users who wish to see how their cluster will react to various situations. Most of the lab code is in the Pacemaker Python module. The front end, cts-lab, is in this directory. The CTS lab runs a randomized series of predefined tests on the cluster. It can be run against a pre-existing cluster configuration or overwrite the existing configuration with a test configuration. * Helpers: Some of the component regression tests and the CTS lab require certain helpers to be installed as root. These include a dummy LSB init script, dummy systemd service, etc. In a source distribution, the source for these is in cts/support. The tests will install these as needed and uninstall them when done. This means that the cluster configuration created by the CTS lab will generate failures if started manually after the lab exits. However, the helper installer can be run manually to make the configuration usable, if you want to do your own further testing with it: /usr/libexec/pacemaker/cts-support install As you might expect, you can also remove the helpers with: /usr/libexec/pacemaker/cts-support uninstall (The actual directory location may vary depending on how Pacemaker was built.) * Cluster benchmark: The benchmark subdirectory of this directory contains some cluster test environment benchmarking code. It is not particularly useful for end users. * Valgrind suppressions: When memory-testing Pacemaker code with valgrind, various bugs in non-Pacemaker libraries and such can clutter the results. The valgrind-pcmk.suppressions file in this directory can be used with valgrind's --suppressions option to eliminate many of these. ## Using the CTS lab ### Requirements * Three or more machines (one test exerciser and at least two cluster nodes). * The test cluster nodes should be on the same subnet and have journalling filesystems (ext4, xfs, etc.) for all of their filesystems other than /boot. You also need a number of free IP addresses on that subnet if you intend to test IP address takeover. * The test exerciser machine doesn't need to be on the same subnet as the test cluster machines. Minimal demands are made on the exerciser; it just has to stay up during the tests. * Tracking problems is easier if all machines' clocks are closely synchronized. NTP does this automatically, but you can do it by hand if you want. * The account on the exerciser used to run the CTS lab (which does not need to be root) must be able to ssh as root to the cluster nodes without a password challenge. See the Mini-HOWTO at the end of this file for details about how to configure ssh for this. * The exerciser needs to be able to resolve all cluster node names, whether by DNS or /etc/hosts. * CTS is not guaranteed to run on all platforms that Pacemaker itself does. It calls commands such as service that may not be provided by all OSes. ### Preparation * Install Pacemaker, including the testing code, on all machines. The testing code must be the same version as the rest of Pacemaker, and the Pacemaker version must be the same on the exerciser and all cluster nodes. You can install from source, although many distributions package the testing code (named pacemaker-cts or similar). Typically, everything needed by the CTS lab is installed in /usr/share/pacemaker/tests/cts. * Configure the cluster layer (Corosync) on the cluster machines (*not* the exerciser), and verify it works. Node names used in the cluster configuration *must* match the hosts' names as returned by `uname -n`; they do not have to match the machines' fully qualified domain names. * Optionally, configure the exerciser as a log aggregator, using something like `rsyslog` log forwarding. If aggregation is detected, the exerciser will look for new messages locally instead of requesting them repeatedly from cluster nodes. * Currently, `/var/log/messages` on the exerciser is the only supported log destination. Further, if it's specified explicitly on the command line as the log file, then CTS lab will not check for aggregation. * CTS lab does not currently detect systemd journal log aggregation. * Optionally, if the lab nodes use the systemd journal for logs, create /etc/systemd/journald.conf.d/cts-lab.conf on each with `RateLimitIntervalSec=0` or `RateLimitBurst=0`, to avoid issues with log detection. ### Run The primary interface to the CTS lab is the cts-lab executable: /usr/share/pacemaker/tests/cts-lab [options] (The actual directory location may vary depending on how Pacemaker was built.) As part of the options, specify the cluster nodes with --nodes, for example: --nodes "pcmk-1 pcmk-2 pcmk-3" Most people will want to save the output to a file, for example: --outputfile ~/cts.log Unless you want to test a pre-existing cluster configuration, you also want (*warning*: with these options, any existing configuration will be lost): --clobber-cib --populate-resources You can test floating IP addresses (*not* already used by any host), one per cluster node, by specifying the first, for example: --test-ip-base 192.168.9.100 Configure some sort of fencing, for example to use fence\_xvm: --stonith xvm Putting all the above together, a command line might look like: /usr/share/pacemaker/tests/cts-lab --nodes "pcmk-1 pcmk-2 pcmk-3" \ --outputfile ~/cts.log --clobber-cib --populate-resources \ --test-ip-base 192.168.9.100 --stonith xvm 50 For more options, run with the --help option. -There are also a couple of wrappers for cts-lab that some users may find more -convenient: cts, which is typically installed in the same place as the rest of -the testing code; and cluster\_test, which is in the source directory and -typically not installed. +There is also a wrapper for cts-lab that some users may find more convenient: +cluster\_test, which is in the source directory and typically not installed. ### Optional: Memory testing Pacemaker has various options for testing memory management. On cluster nodes, Pacemaker components use various environment variables to control these options. How these variables are set varies by OS, but usually they are set in a file such as /etc/sysconfig/pacemaker or /etc/default/pacemaker. Valgrind is a program for detecting memory management problems such as use-after-free errors. If you have valgrind installed, you can enable it by setting the following environment variables on all cluster nodes: PCMK_valgrind_enabled=pacemaker-attrd,pacemaker-based,pacemaker-controld,pacemaker-execd,pacemaker-fenced,pacemaker-schedulerd VALGRIND_OPTS="--leak-check=full --trace-children=no --num-callers=25 --log-file=/var/lib/pacemaker/valgrind-%p --suppressions=/usr/share/pacemaker/tests/valgrind-pcmk.suppressions --gen-suppressions=all" If running the CTS lab with valgrind enabled on the cluster nodes, add these options to cts-lab: --valgrind-procs "pacemaker-attrd pacemaker-based pacemaker-controld pacemaker-execd pacemaker-schedulerd pacemaker-fenced" These options should only be set while specifically testing memory management, because they may slow down the cluster significantly, and they will disable writes to the CIB. If desired, you can enable valgrind on a subset of pacemaker components rather than all of them as listed above. Valgrind will put a text file for each process in the location specified by valgrind's --log-file option. See https://www.valgrind.org/docs/manual/mc-manual.html for explanations of the messages valgrind generates. Separately, if you are using the GNU C library, the G\_SLICE, MALLOC\_PERTURB\_, and MALLOC\_CHECK\_ environment variables can be set to affect the library's memory management functions. When using valgrind, G\_SLICE should be set to "always-malloc", which helps valgrind track memory by always using the malloc() and free() routines directly. When not using valgrind, G\_SLICE can be left unset, or set to "debug-blocks", which enables the C library to catch many memory errors but may impact performance. If the MALLOC\_PERTURB\_ environment variable is set to an 8-bit integer, the C library will initialize all newly allocated bytes of memory to the integer value, and will set all newly freed bytes of memory to the bitwise inverse of the integer value. This helps catch uses of uninitialized or freed memory blocks that might otherwise go unnoticed. Example: MALLOC_PERTURB_=221 If the MALLOC\_CHECK\_ environment variable is set, the C library will check for certain heap corruption errors. The most useful value in testing is 3, which will cause the library to print a message to stderr and abort execution. Example: MALLOC_CHECK_=3 Valgrind should be enabled for either all nodes or none when used with the CTS lab, but the C library variables may be set differently on different nodes. ### Optional: Remote node testing If the pacemaker-remoted daemon is installed on all cluster nodes, the CTS lab will enable remote node tests. The remote node tests choose a random node, stop the cluster on it, start pacemaker-remoted on it, and add an ocf:pacemaker:remote resource to turn it into a remote node. When the test is done, the lab will turn the node back into a cluster node. To avoid conflicts, the lab will rename the node, prefixing the original node name with "remote-". For example, "pcmk-1" will become "remote-pcmk-1". These names do not need to be resolvable. The name change may require special fencing configuration, if the fence agent expects the node name to be the same as its hostname. A common approach is to specify the "remote-" names in pcmk\_host\_list. If you use pcmk\_host\_list=all, the lab will expand that to all cluster nodes and their "remote-" names. You may additionally need a pcmk\_host\_map argument to map the "remote-" names to the hostnames. Example: --stonith xvm --stonith-args \ pcmk_host_list=all,pcmk_host_map=remote-pcmk-1:pcmk-1;remote-pcmk-2:pcmk-2 ### Optional: Remote node testing with valgrind When running the remote node tests, the Pacemaker components on the *cluster* nodes can be run under valgrind as described in the "Memory testing" section. However, pacemaker-remoted cannot be run under valgrind that way, because it is started by the OS's regular boot system and not by Pacemaker. Details vary by system, but the goal is to set the VALGRIND\_OPTS environment variable and then start pacemaker-remoted by prefixing it with the path to valgrind. The init script and systemd service file provided with pacemaker-remoted will load the pacemaker environment variables from the same location used by other Pacemaker components, so VALGRIND\_OPTS will be set correctly if using one of those. For an OS using systemd, you can override the ExecStart parameter to run valgrind. For example: mkdir /etc/systemd/system/pacemaker_remote.service.d cat >/etc/systemd/system/pacemaker_remote.service.d/valgrind.conf </dev/null -if [ $? != 0 ]; then - echo $0 needs the cluster-helper script to be in your path - exit 1 -fi - -which cluster-clean &>/dev/null -if [ $? != 0 ]; then - echo $0 needs the cluster-clean script to be in your path - exit 1 -fi - -if [ "x$cluster_name" = x ] ; then - clusters=`ls -1 ~/.dsh/group/[a-z]+[0-9] | sed s/.*group.// | tr '\n' ' ' ` - - echo "custom) interactively define a cluster" - for i in $clusters; do - echo "$i) `cluster-helper --list short -g $i`" - done - - read -p "Choose a cluster [custom]: " cluster_name - echo -fi - -if [ -z $cluster_name ]; then - cluster_name=custom -fi - - -case $cluster_name in - custom) - read -p "Cluster name: " cluster_name - read -p "Cluster hosts: " cluster_hosts - read -p "Cluster log file: " cluster_log - cluster-helper add -g "$cluster_name" -w "$cluster_hosts" - ;; - *) - cluster_hosts=`cluster-helper --list short -g $cluster_name` - cluster_log=~/cluster-$cluster_name.log - ;; -esac - -if [ $run = 1 ]; then - clean=1 -fi - -if [ $clean = 1 ]; then - rm -f $cluster_log - cluster-clean -g $cluster_name --kill -fi - -if [ $boot = 1 ]; then - $cts_root/cts-lab -r -c -g $cluster_name --boot - rc=$? - if [ $rc = 0 ]; then - echo "The cluster is ready..." - fi - exit $rc - -elif [ $run = 1 ]; then - $cts_root/cts-lab -r -c -g $cluster_name 500 "$@" - exit $? - -elif [ $clean = 1 ]; then - exit 0 -fi - -# vim: set filetype=sh: