diff --git a/lrmd/pacemaker_remote.in b/lrmd/pacemaker_remote.in
index cc64a09ee6..a2e9ce9796 100644
--- a/lrmd/pacemaker_remote.in
+++ b/lrmd/pacemaker_remote.in
@@ -1,159 +1,159 @@
 #!/bin/bash
 
 # Authors:
 #  Andrew Beekhof <abeekhof@redhat.com>
 #
 # License: Revised BSD
 
 # chkconfig: - 99 01
 # description: Pacemaker Cluster Manager
 # processname: pacemaker_remoted
 #
 ### BEGIN INIT INFO
 # Provides:		pacemaker_remoted
-# Required-Start:	$network
+# Required-Start:	$network $remote_fs
 # Should-Start:		$syslog
-# Required-Stop:	$network
+# Required-Stop:	$network $remote_fs
 # Default-Start:
 # Default-Stop:
 # Short-Description:	Starts and stops the Pacemaker remote agent for non-cluster nodes
 # Description:		Starts and stops the Pacemaker remote agent for non-cluster nodes
 ### END INIT INFO
 
 desc="Pacemaker Remote Agent"
 prog="pacemaker_remoted"
 cman=0
 
 # set secure PATH
 PATH="/sbin:/bin:/usr/sbin:/usr/bin:@sbindir@"
 
 checkrc() {
     if [ $? = 0 ]; then
 	success
     else
 	failure
     fi
 }
 
 success()
 {
 	echo -ne "[  OK  ]\r"
 }
 
 failure()
 {
 	echo -ne "[FAILED]\r"
 }
 
 status()
 {
 	pid=$(pidof $1 2>/dev/null)
 	rtrn=$?
 	if [ $rtrn -ne 0 ]; then
 		echo "$1 is stopped"
 	else
 		echo "$1 (pid $pid) is running..."
 	fi
 	return $rtrn
 }
 
 # rpm based distros
 if [ -d @sysconfdir@/sysconfig ]; then
 	[ -f @INITDIR@/functions ] && . @INITDIR@/functions
 	set -a
 	[ -f @sysconfdir@/sysconfig/pacemaker ] && . @sysconfdir@/sysconfig/pacemaker
 	set +a
 	[ -z "$LOCK_FILE" ] && LOCK_FILE="@localstatedir@/lock/subsys/pacemaker_remote"
 fi
 
 # deb based distros
 if [ -d @sysconfdir@/default ]; then
 	set -a
 	[ -f @sysconfdir@/default/pacemaker ] && . @sysconfdir@/default/pacemaker
 	set +a
 	[ -z "$LOCK_FILE" ] && LOCK_FILE="@localstatedir@/lock/pacemaker_remote"
 fi
 
 start()
 {
 	echo -n "Starting $desc: "
 
 	# most recent distributions use tmpfs for $@localstatedir@/run
 	# to avoid to clean it up on every boot.
 	# they also assume that init scripts will create
 	# required subdirectories for proper operations
 	mkdir -p @localstatedir@/run
 
 	if status $prog > /dev/null 2>&1; then
 		success
 	else
 		$prog > /dev/null 2>&1 &
 
 		# Time to connect to corosync and fail
 		sleep 5
 
 		if status $prog > /dev/null 2>&1; then
 			touch $LOCK_FILE
 			pidof $prog > @localstatedir@/run/$prog.pid
 			success
 		else
 			failure
 			rtrn=1
 		fi
 	fi
 	echo
 }
 
 stop()
 {
 	if status $prog > /dev/null 2>&1; then
 	    echo -n "Signaling $desc to terminate: "
 	    kill -TERM $(pidof $prog) > /dev/null 2>&1
 	    success
 	    echo
 
 	    echo -n "Waiting for $desc to unload:"
 	    while status $prog > /dev/null 2>&1; do
 		sleep 1
 		echo -n "."
 	    done
 	fi
 
 	rm -f $LOCK_FILE
 	rm -f @localstatedir@/run/$prog.pid
 	success
 	echo
 }
 
 rtrn=0
 
 case "$1" in
 start)
 	start
 ;;
 restart|reload|force-reload)
 	stop
 	start
 ;;
 condrestart|try-restart)
 	if status $prog > /dev/null 2>&1; then
 	    stop
 	    start
 	    rtrn=$?
 	fi
 ;;
 status)
 	status $prog
 	rtrn=$?
 ;;
 stop)
 	stop
 	rtrn=$?
 ;;
 *)
 	echo "usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
 	rtrn=2
 ;;
 esac
 
 exit $rtrn
diff --git a/mcp/pacemaker.in b/mcp/pacemaker.in
index df0789eccf..e6d5462b98 100644
--- a/mcp/pacemaker.in
+++ b/mcp/pacemaker.in
@@ -1,282 +1,282 @@
 #!/bin/bash
 
 # Authors:
 #  Andrew Beekhof <abeekhof@redhat.com>
 #  Fabio M. Di Nitto <fdinitto@redhat.com>
 #
 # License: Revised BSD
 
 # chkconfig: - 99 01
 # description: Pacemaker Cluster Manager
 # processname: pacemakerd
 #
 ### BEGIN INIT INFO
 # Provides:		pacemaker
-# Required-Start:	$network corosync
+# Required-Start:	$network $remote_fs corosync
 # Should-Start:		$syslog
-# Required-Stop:	$network corosync
+# Required-Stop:	$network $remote_fs corosync
 # Default-Start:
 # Default-Stop:
 # Short-Description:	Starts and stops Pacemaker Cluster Manager.
 # Description:		Starts and stops Pacemaker Cluster Manager.
 ### END INIT INFO
 
 desc="Pacemaker Cluster Manager"
 prog="pacemakerd"
 
 # set secure PATH
 PATH="/sbin:/bin:/usr/sbin:/usr/bin:@sbindir@"
 
 checkrc() {
     if [ $? = 0 ]; then
 	success
     else
 	failure
     fi
 }
 
 success()
 {
 	echo -ne "[  OK  ]\r"
 }
 
 failure()
 {
 	echo -ne "[FAILED]\r"
 }
 
 log() 
 {
     logger -t pacemaker -p daemon.notice "$*"
 }
 
 notify()
 {
     log "$*"
     echo -n "$*"
 }
 
 status()
 {
 	pid=$(pidof $1 2>/dev/null)
 	local rtrn=$?
 	if [ $rtrn -ne 0 ]; then
 		echo "$1 is stopped"
 	else
 		echo "$1 (pid $pid) is running..."
 	fi
 	return $rtrn
 }
 
 # rpm based distros
 if [ -d @sysconfdir@/sysconfig ]; then
 	[ -f @INITDIR@/functions ] && . @INITDIR@/functions
 set -a
 	[ -f @sysconfdir@/sysconfig/pacemaker ] && . @sysconfdir@/sysconfig/pacemaker
 set +a
 	[ -z "$LOCK_FILE" ] && LOCK_FILE="@localstatedir@/lock/subsys/pacemaker"
 fi
 
 # deb based distros
 if [ -d @sysconfdir@/default ]; then
 set -a
 	[ -f @sysconfdir@/default/pacemaker ] && . @sysconfdir@/default/pacemaker
 set +a
 	[ -z "$LOCK_FILE" ] && LOCK_FILE="@localstatedir@/lock/pacemaker"
 fi
 
 # Unless specified otherwise, assume cman is in use if cluster.conf exists
 if [ x = "x$PCMK_STACK" -a -f @sysconfdir@/cluster/cluster.conf ]; then
     PCMK_STACK=cman
 fi
 
 start()
 {
 	notify "Starting $desc"
 
 	# most recent distributions use tmpfs for $@localstatedir@/run
 	# to avoid to clean it up on every boot.
 	# they also assume that init scripts will create
 	# required subdirectories for proper operations
 	mkdir -p @localstatedir@/run
 
 	if status $prog > /dev/null 2>&1; then
 		success
 	else
 		$prog > /dev/null 2>&1 &
 
 		# Time to connect to corosync and fail
 		sleep 5
 
 		if status $prog > /dev/null 2>&1; then
 			touch $LOCK_FILE
 			pidof $prog > @localstatedir@/run/$prog.pid
 			success
 		else
 			failure
 			rtrn=1
 		fi
 	fi
 	echo
 }
 
 cman_pre_start()
 {
     # start cman if it's not running
     service cman status >/dev/null 2>&1
     if [ $? -ne 0 ]; then
 	service cman start
 	if [ $? -ne 0 ]; then
 	    notify "Aborting startup of $desc"
 	    echo
 	    exit 1
 	fi
     fi
 
     # start cman's friends if they're not running but were configured to start automatically
     for cservice in cmirrord clvmd gfs2; do
 	chkconfig --list $cservice 2>/dev/null | grep -q ":on"
 	if [ $? -eq 0 ]; then
 	    service $cservice status >/dev/null 2>&1
 	    if [ $? -ne 0 ]; then
 		log "Attempting to start $cservice"
 		service $cservice start
 	    fi
 	fi
     done
 }
 
 cman_pre_stop()
 {
     # if cman is not running there is nothing we need to do here
     service cman status >/dev/null 2>&1
     if [ $? -ne 0 ]; then
 	return
     fi
 
     has_lvm=`crm_resource -c | grep Resource: | grep LVM`
 
     # migrate resources to another node or shut them down
     cname=`crm_node --name`
     crm_attribute -N $cname -n standby -v true -l reboot
     notify "Waiting for shutdown of managed resources"
 
 
     while [ 1 = 1 ]; do
 	# 0x0000000000000002 means managed
 	active=`crm_resource -c | grep Resource: | grep 0x...............[2367] | awk '{print $9}' | grep "^${cname}$" | wc -l`
 	if [ $active = 0 ]; then
 	    break;
 	fi
 	sleep 2
 	echo -n "."
     done
     success
     echo
 
     if [ -d /sys/kernel/dlm/ ]; then
 	lockspace="$(ls -1 /sys/kernel/dlm/)"
 	if [ -n "$lockspace" ]; then
 	    notify "DLM lockspace still in use"
 	    echo ""
 
 	    for cservice in gfs2 clvmd cmirrord; do
 		service $cservice status >/dev/null 2>&1
 		if [ $? -eq 0 ]; then
 		    if [ -n "$has_lvm" ] && [ "$cservice" = "clvmd" ]; then
 			# allow HA-LVM to take a lock on vg/lv before clvmd can exit
 			notify "Waiting for LVM services to start somewhere else"
 			sleep 15
 			success
 		    fi
 		    log "Attempting to shutdown $cservice"
 		    service $cservice stop
 		fi
 	    done
 	fi
     fi
 
     notify "Leaving fence domain"
     fence_tool leave -w 10
     checkrc
 
     fenced=$(pidof fenced)
     notify "Stopping fenced $fenced"
     kill -KILL $fenced > /dev/null 2>&1
     checkrc
 }
 
 stop()
 {
 	shutdown_prog=$prog
 	if ! status $prog > /dev/null 2>&1; then
 	    shutdown_prog="crmd"
 	fi
 
 	if status $shutdown_prog > /dev/null 2>&1; then
 	    notify "Signaling $desc to terminate"
 	    kill -TERM $(pidof $prog) > /dev/null 2>&1
 	    checkrc
 	    echo
 
 	    notify "Waiting for cluster services to unload"
 	    while status $prog > /dev/null 2>&1; do
 		sleep 1
 		echo -n "."
 	    done
 	else
 	    echo -n "$desc is already stopped"
 	fi
 
 	rm -f $LOCK_FILE
 	rm -f @localstatedir@/run/$prog.pid
 	killall -q -9 'crmd stonithd attrd cib lrmd pacemakerd'
 	success
 	echo
 }
 
 rtrn=0
 
 case "$1" in
 start)
 	# For consistency with stop
 	[ "$PCMK_STACK" = cman ] && cman_pre_start
 	start
 ;;
 restart|reload|force-reload)
 	stop
 	start
 ;;
 condrestart|try-restart)
 	if status $prog > /dev/null 2>&1; then
 	    stop
 	    start
 	fi
 ;;
 status)
 	status $prog
 	rtrn=$?
 ;;
 stop)
 	#
 	# stonithd needs to be around until fenced is stopped
 	# fenced can't be stopped until any resource using dlm is active
 	#
 	# So:
 	# 1. put the node into standby
 	# 2. wait for all resources to be stopped
 	# 3. stop fenced and anything that needs it (borrowed from the cman script)
 	# 4. stop pacemaker
 	# 5. stop the rest of cman (so it doesn't end up half up/down)
 	#
 	[ "$PCMK_STACK" = cman ] && cman_pre_stop
 	stop
 	[ "$PCMK_STACK" = cman ] && service cman stop
 ;;
 *)
 	echo "usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
 	rtrn=2
 ;;
 esac
 
 exit $rtrn