diff --git a/.gitignore b/.gitignore index c4b29bd763..e35033bfbf 100644 --- a/.gitignore +++ b/.gitignore @@ -1,356 +1,352 @@ # # Copyright 2011-2023 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # # Common conventions for files that should be ignored *~ *.bz2 *.diff *.orig *.patch *.rej *.sed *.swp *.tar.gz *.tgz \#* .\#* logs # libtool artifacts *.la *.lo .libs libltdl libtool libtool.m4 ltdl.m4 /m4/argz.m4 /m4/ltargz.m4 /m4/ltoptions.m4 /m4/ltsugar.m4 /m4/ltversion.m4 /m4/lt~obsolete.m4 # autotools artifacts .deps .dirstamp Makefile Makefile.in aclocal.m4 autoconf autoheader autom4te.cache/ automake /confdefs.h config.log config.status configure /conftest* # gettext artifacts /ABOUT-NLS /m4/codeset.m4 /m4/fcntl-o.m4 /m4/gettext.m4 /m4/glibc2.m4 /m4/glibc21.m4 /m4/iconv.m4 /m4/intdiv0.m4 /m4/intl.m4 /m4/intldir.m4 /m4/intlmacosx.m4 /m4/intmax.m4 /m4/inttypes-pri.m4 /m4/inttypes_h.m4 /m4/lcmessage.m4 /m4/lib-ld.m4 /m4/lib-link.m4 /m4/lib-prefix.m4 /m4/lock.m4 /m4/longlong.m4 /m4/nls.m4 /m4/po.m4 /m4/printf-posix.m4 /m4/progtest.m4 /m4/size_max.m4 /m4/stdint_h.m4 /m4/threadlib.m4 /m4/uintmax_t.m4 /m4/visibility.m4 /m4/wchar_t.m4 /m4/wint_t.m4 /m4/xsize.m4 /po/*.gmo /po/*.header /po/*.pot /po/*.sin /po/Makefile.in.in /po/Makevars.template /po/POTFILES /po/Rules-quot /po/stamp-po # configure targets /agents/ocf/ClusterMon /agents/ocf/Dummy /agents/ocf/HealthCPU /agents/ocf/HealthIOWait /agents/ocf/HealthSMART /agents/ocf/Stateful /agents/ocf/SysInfo /agents/ocf/attribute /agents/ocf/controld /agents/ocf/ifspeed /agents/ocf/ping /agents/ocf/remote /agents/stonith/fence_legacy /agents/stonith/fence_watchdog /cts/benchmark/clubench /cts/cluster_test /cts/cts /cts/cts-attrd /cts/cts-cli /cts/cts-exec /cts/cts-fencing /cts/cts-lab /cts/cts-regression /cts/cts-scheduler /cts/cts-schemas /cts/lab/CTS.py /cts/support/LSBDummy /cts/support/cts-support /cts/support/fence_dummy /cts/support/pacemaker-cts-dummyd /cts/support/pacemaker-cts-dummyd@.service /daemons/execd/pacemaker_remote /daemons/execd/pacemaker_remote.service /daemons/fenced/fence_legacy /daemons/fenced/fence_watchdog /daemons/pacemakerd/pacemaker.combined.upstart /daemons/pacemakerd/pacemaker.service /daemons/pacemakerd/pacemaker.upstart /doc/Doxyfile /etc/init.d/pacemaker /etc/logrotate.d/pacemaker /etc/sysconfig/pacemaker /include/config.h /include/config.h.in /include/crm_config.h /maint/bumplibs /python/pacemaker/buildoptions.py /python/setup.py /tools/cluster-clean /tools/cluster-helper /tools/cluster-init /tools/cibsecret /tools/crm_error /tools/crm_failcount /tools/crm_master /tools/crm_mon.service /tools/crm_mon.upstart /tools/crm_report /tools/crm_rule /tools/crm_standby /tools/pcmk_simtimes /tools/report.collector /tools/report.common /xml/rng-helper # Compiled targets and intermediary files *.o *.pc *.pyc /daemons/attrd/pacemaker-attrd /daemons/based/pacemaker-based /daemons/controld/pacemaker-controld /daemons/execd/cts-exec-helper /daemons/execd/pacemaker-execd /daemons/execd/pacemaker-remoted /daemons/fenced/cts-fence-helper /daemons/fenced/pacemaker-fenced /daemons/pacemakerd/pacemakerd /daemons/schedulerd/pacemaker-schedulerd /devel/scratch /lib/gnu/stdalign.h /tools/attrd_updater /tools/cibadmin /tools/crmadmin /tools/crm_attribute /tools/crm_diff /tools/crm_mon /tools/crm_node /tools/crm_resource /tools/crm_shadow /tools/crm_simulate /tools/crm_ticket /tools/crm_verify /tools/iso8601 /tools/stonith_admin # Generated XML schema files /xml/crm_mon.rng /xml/pacemaker*.rng /xml/versions.rng /xml/api/api-result*.rng # Working directories for make dist and make export /pacemaker-[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9] # Documentation build targets and intermediary files *.7 *.7.xml *.7.html *.8 *.8.xml *.8.html GPATH GRTAGS GTAGS TAGS /daemons/fenced/pacemaker-fenced.xml /daemons/schedulerd/pacemaker-schedulerd.xml /doc/.ABI-build /doc/HTML /doc/abi_dumps /doc/abi-check /doc/api/ /doc/compat_reports /doc/crm_fencing.html /doc/sphinx/*/_build /doc/sphinx/*/conf.py /doc/sphinx/*/generated /doc/sphinx/build-2.1.txt /doc/sphinx/shared/images/*.png # Test artifacts (from unit tests, regression tests, static analysis, etc.) *.coverity *.gcda *.gcno coverity-* pacemaker_*.info /coverage /cppcheck.out /cts/scheduler/bug-rh-1097457.log /cts/scheduler/bug-rh-1097457.trs /cts/scheduler/shadow.* -/cts/scheduler/xml/*.ref -/cts/scheduler/xml/*.ref.err -/cts/scheduler/xml/*.up -/cts/scheduler/xml/*.up.err /cts/schemas/test-*/*.up /cts/schemas/test-*/*.up.err /cts/test-suite.log /lib/*/tests/*/*.log /lib/*/tests/*/*_test /lib/*/tests/*/*.trs /lib/common/tests/schemas/schemas /test/_test_file.c # Packaging artifacts *.rpm /pacemaker.spec /rpm/[A-LN-Z]* /rpm/build.counter /rpm/mock # Project maintainer artifacts /maint/gnulib /maint/mocked/based /maint/testcc_helper.cc /maint/testcc_*_h # Formerly built files (helps when jumping back and forth in checkout) /.ABI-build /Doxyfile /HTML /abi_dumps /abi-check /agents/ocf/o2cb /build.counter /compat_reports /compile /cts/.regression.failed.diff /attrd /cib /config.guess /config.sub /coverage.sh /crmd /cts/CTS.py /cts/CTSlab.py /cts/CTSvars.py /cts/HBDummy /cts/LSBDummy /cts/OCFIPraTest.py /cts/cts-coverage /cts/cts-log-watcher /cts/cts-support /cts/fence_dummy /cts/lab/CTSlab.py /cts/lab/CTSvars.py /cts/lab/OCFIPraTest.py /cts/lab/cluster_test /cts/lab/cts /cts/lab/cts-log-watcher /cts/lxc_autogen.sh /cts/pacemaker-cts-dummyd /cts/pacemaker-cts-dummyd@.service /daemons/based/cibmon /daemons/fenced/fence_legacy /daemons/fenced/fence_watchdog /daemons/pacemakerd/pacemaker /depcomp /doc/*.build /doc/*/en-US/Ap-*.xml /doc/*/en-US/Ch-*.xml /doc/*/publican.cfg /doc/*/publish /doc/*/tmp/** /doc/Clusters_from_Scratch.txt /doc/Pacemaker_Explained.txt /doc/acls.html /doc/publican-catalog* /doc/shared/en-US/*.xml /doc/shared/en-US/images/pcmk-*.png /doc/shared/en-US/images/Policy-Engine-*.png /extra/*/* /fencing /include/stamp-* /install-sh /lib/common/md5.c /lib/common/tests/flags/pcmk__clear_flags_as /lib/common/tests/flags/pcmk__set_flags_as /lib/common/tests/flags/pcmk_all_flags_set /lib/common/tests/flags/pcmk_any_flags_set /lib/common/tests/operations/parse_op_key /lib/common/tests/strings/pcmk__btoa /lib/common/tests/strings/pcmk__parse_ll_range /lib/common/tests/strings/pcmk__scan_double /lib/common/tests/strings/pcmk__str_any_of /lib/common/tests/strings/pcmk__strcmp /lib/common/tests/strings/pcmk__char_in_any_str /lib/common/tests/utils/pcmk_str_is_infinity /lib/common/tests/utils/pcmk_str_is_minus_infinity /lib/gnu/libgnu.a /lib/pengine/tests/rules/ /lrmd /ltmain.sh /mcp /missing /mock /pacemaker-*.spec /pengine /py-compile /scratch /tools/cluster-init /test-driver /xml/assets /xml/crm.dtd /xml/version-diff.sh ylwrap diff --git a/cts/cts-schemas.in b/cts/cts-schemas.in index f355a37a51..108c1a4b0c 100755 --- a/cts/cts-schemas.in +++ b/cts/cts-schemas.in @@ -1,759 +1,618 @@ #!@BASH_PATH@ # # Copyright 2018-2024 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU General Public License version 2 # or later (GPLv2+) WITHOUT ANY WARRANTY. # Note on portable usage of sed: GNU/POSIX/*BSD sed have a limited subset of # compatible functionality. Do not use the -i option, alternation (\|), # \0, or character sequences such as \n or \s. # Exit immediately if a command fails, with some exceptions (for example, when # part of an if or while condition). Treat unset variables as errors during # expansion. See bash(1) man page for details. set -eu # If readlink supports -e, use it readlink -e / >/dev/null 2>/dev/null if [ $? -eq 0 ]; then test_home=$(dirname "$(readlink -e "$0")") else test_home=$(dirname "$0") fi suites_dir="$test_home/schemas" src_dir=$(dirname "$test_home") if [ -d "$src_dir/xml" ]; then export PCMK_schema_directory="$src_dir/xml" echo "Using local schemas from: $PCMK_schema_directory" else export PCMK_schema_directory=@CRM_SCHEMA_DIRECTORY@ fi DIFF="diff -u" DIFF_PAGER="less -LRX" RNG_VALIDATOR="xmllint --noout --relaxng" XSLT_PROCESSOR="xsltproc --nonet" # Available test suites -tests="test2to3 test2to3enter test2to3leave test2to3roundtrip cts_scheduler" +tests="test2to3 test2to3enter test2to3leave test2to3roundtrip" # # commons # emit_result() { _er_howmany=${1:?} # how many errors (0/anything else incl. strings) _er_subject=${2:?} _er_prefix=${3-} if [ -n "$_er_prefix" ]; then _er_prefix="${_er_prefix}: " fi if [ "$_er_howmany" = "0" ]; then printf "%s%s finished OK\n" "${_er_prefix}" "${_er_subject}" else printf "%s%s encountered ${_er_howmany} errors\n" \ "${_er_prefix}" "${_er_subject}" fi } emit_error() { _ee_msg=${1:?} printf "%s\n" "${_ee_msg}" >&2 } # returns 1 + floor of base 2 logaritm for _lo0r_i in 1...255, # or 0 for _lo0r_i = 0 log2_or_0_return() { _lo0r_i=${1:?} return $(((!(_lo0r_i >> 1) && _lo0r_i) * 1 \ + (!(_lo0r_i >> 2) && _lo0r_i & (1 << 1)) * 2 \ + (!(_lo0r_i >> 3) && _lo0r_i & (1 << 2)) * 3 \ + (!(_lo0r_i >> 4) && _lo0r_i & (1 << 3)) * 4 \ + (!(_lo0r_i >> 5) && _lo0r_i & (1 << 4)) * 5 \ + (!(_lo0r_i >> 6) && _lo0r_i & (1 << 5)) * 6 \ + (!(_lo0r_i >> 7) && _lo0r_i & (1 << 6)) * 7 \ + !!(_lo0r_i >> 7) * 7 )) } # rough addition of two base 2 logarithms log2_or_0_add() { _lo0a_op1=${1:?} _lo0a_op2=${2:?} if [ "$_lo0a_op1" -gt "$_lo0a_op2" ]; then return ${_lo0a_op1} elif [ "$_lo0a_op2" -gt "$_lo0a_op1" ]; then return ${_lo0a_op2} elif [ "$_lo0a_op1" -gt 0 ]; then return $((_lo0a_op1 + 1)) else return ${_lo0a_op1} fi } # # test phases # -# -r ... whether to remove referential files as well # stdin: input file per line test_cleaner() { - _tc_cleanref=0 - - while [ $# -gt 0 ]; do - case "$1" in - -r) _tc_cleanref=1;; - esac - shift - done - while read _tc_origin; do _tc_origin=${_tc_origin%.*} rm -f "${_tc_origin}.up" "${_tc_origin}.up.err" rm -f "$(dirname "${_tc_origin}")/.$(basename "${_tc_origin}").up" - - if [ "$_tc_cleanref" -eq 1 ]; then - rm -f "${_tc_origin}.ref" "${_tc_origin}.ref.err" - fi done } test_explanation() { _tsc_template= while [ $# -gt 0 ]; do case "$1" in -o=*) _tsc_template="$PCMK_schema_directory/upgrade-${1#-o=}.xsl";; esac shift done $XSLT_PROCESSOR "$PCMK_schema_directory/upgrade-detail.xsl" "$_tsc_template" } cleanup_module_error() { # Work around a libxml2 bug. At least as of libxslt-1.1.41 and # libxml2-2.10.4, if the stylesheet contains a user-defined top-level # element (that is, one with a namespace other than the XSL namespace), # libxslt tries to load the namespace URI as an XML module. If this fails, # libxml2 logs a "module error: failed to open ..." message. # # This appears to be fixed in libxml2 v2.13 with commit ecb4c9fb. sed "/module error/d" "$1" > "$1.new" mv -- "$1.new" "$1" } # stdout: filename of the transformed file test_runner_upgrade() { _tru_template=${1:?} _tru_source=${2:?} # filename _tru_mode=${3:?} # extra modes wrt. "referential" outcome, see below _tru_ref="${_tru_source%.*}.ref" if [ "$((_tru_mode & (1 << 0)))" -ne 0 ] || [ -f "${_tru_ref}.err" ]; then _tru_ref_err="${_tru_ref}.err" else _tru_ref_err=/dev/null fi _tru_proc_rc=0 _tru_diff_rc=0 _tru_target="${_tru_source%.*}.up" _tru_target_err="${_tru_target}.err" if [ "$((_tru_mode & (1 << 2)))" -eq 0 ]; then ${XSLT_PROCESSOR} "${_tru_template}" "${_tru_source}" \ > "${_tru_target}" 2> "${_tru_target_err}" \ || _tru_proc_rc=$? cleanup_module_error "$_tru_target_err" if [ "$_tru_proc_rc" -ne 0 ]; then echo "$_tru_target_err" return "$_tru_proc_rc" fi else # when -B (deblanked outcomes handling) requested, we: # - drop blanks from the source XML # (effectively emulating pacemaker handling) # - re-drop blanks from the XSLT outcome, # which is compared with referential outcome # processed with even greedier custom deblanking # (extraneous inter-element whitespace like blank # lines will not get removed otherwise, see lower) xmllint --noblanks "${_tru_source}" \ | ${XSLT_PROCESSOR} "${_tru_template}" - \ > "${_tru_target}" 2> "${_tru_target_err}" \ || _tru_proc_rc=$? cleanup_module_error "$_tru_target_err" if [ "$_tru_proc_rc" -ne 0 ]; then echo "$_tru_target_err" return "$_tru_proc_rc" fi # reusing variable no longer needed _tru_template="$(dirname "${_tru_target}")" _tru_template="${_tru_template}/.$(basename "${_tru_target}")" mv "${_tru_target}" "${_tru_template}" ${XSLT_PROCESSOR} - "${_tru_template}" > "${_tru_target}" < EOF fi # only respond with the flags except for "-B", i.e., when both: # - _tru_mode non-zero # - "-B" in _tru_mode is zero (hence non-zero when flipped with XOR) if [ "$((_tru_mode * ((_tru_mode ^ (1 << 2)) & (1 << 2))))" -ne 0 ]; then if [ "$((_tru_mode & (1 << 0)))" -ne 0 ]; then cp -a "${_tru_target}" "${_tru_ref}" cp -a "${_tru_target_err}" "${_tru_ref_err}" fi if [ "$((_tru_mode & (1 << 1)))" -ne 0 ]; then { ${DIFF} "${_tru_source}" "${_tru_ref}" \ && printf '\n(files match)\n'; } | ${DIFF_PAGER} >&2 if [ $? -ne 0 ]; then printf "\npager failure\n" >&2 return 1 fi printf '\nIs comparison OK? ' >&2 if read _tru_answer &2; return 1;; esac else return 1 fi fi elif [ -f "$_tru_ref" ] && [ -e "$_tru_ref_err" ]; then if [ "$((_tru_mode & (1 << 2)))" -eq 0 ]; then _output=$(cat "$_tru_ref") else _output=$($XSLT_PROCESSOR - "$_tru_ref" < EOF ) fi echo "$_output" | $DIFF - "$_tru_target" >&2 || _tru_diff_rc=$? if [ "$_tru_diff_rc" -eq 0 ]; then $DIFF "$_tru_ref_err" "$_tru_target_err" >&2 || _tru_diff_rc=$? fi if [ "$_tru_diff_rc" -ne 0 ]; then emit_error "Outputs differ from referential ones" echo "/dev/null" return 1 fi else emit_error "Referential file(s) missing: ${_tru_ref}" echo "/dev/null" return 1 fi echo "${_tru_target}" } test_runner_validate() { _trv_schema=${1:?} _trv_target=${2:?} # filename if ! ${RNG_VALIDATOR} "${_trv_schema}" "${_trv_target}" \ 2>/dev/null; then ${RNG_VALIDATOR} "${_trv_schema}" "${_trv_target}" fi } # -a= ... action modifier completing template name (e.g. 2.10-(enter|leave)) # -o= ... which conventional version to deem as the transform origin # -t= ... which conventional version to deem as the transform target # -B # -D # -G ... see usage # stdin: input file per line test_runner() { _tr_mode=0 _tr_ret=0 _tr_action= _tr_schema_o= _tr_schema_t= _tr_target= _tr_template= while [ $# -gt 0 ]; do case "$1" in -a=*) _tr_action="${1#-a=}";; -o=*) _tr_template="${1#-o=}" _tr_schema_o="$PCMK_schema_directory/pacemaker-${1#-o=}.rng";; -t=*) _tr_schema_t="$PCMK_schema_directory/pacemaker-${1#-t=}.rng";; -G) _tr_mode=$((_tr_mode | (1 << 0)));; -D) _tr_mode=$((_tr_mode | (1 << 1)));; -B) _tr_mode=$((_tr_mode | (1 << 2)));; esac shift done _tr_template="$PCMK_schema_directory/upgrade-${_tr_action:-${_tr_template:?}}.xsl" if [ ! -f "${_tr_schema_o:?}" ] || [ ! -f "${_tr_schema_t:?}" ]; then emit_error "Origin and/or target schema missing, rerun make" return 1 fi while read _tr_origin; do printf '%-60s' "${_tr_origin}... " # pre-validate if ! test_runner_validate "${_tr_schema_o}" "${_tr_origin}"; then _tr_ret=$((_tr_ret + 1)); echo "E:pre-validate"; continue fi # upgrade if ! _tr_target=$(test_runner_upgrade "${_tr_template}" \ "${_tr_origin}" "${_tr_mode}"); then _tr_ret=$((_tr_ret + 1)); if [ -z "$_tr_target" ]; then break fi echo "E:upgrade" if [ -s "$_tr_target" ]; then echo --- cat "$_tr_target" || : echo --- fi continue fi # post-validate if ! test_runner_validate "${_tr_schema_t}" "${_tr_target}"; then _tr_ret=$((_tr_ret + 1)); echo "E:post-validate"; continue fi echo "OK" done log2_or_0_return ${_tr_ret} } # # particular test variations # -C # -X # stdin: granular test specification(s) if any # test2to3() { _t23_pattern= while read _t23_spec; do _t23_spec=${_t23_spec%.xml} _t23_spec=${_t23_spec%\*} _t23_pattern="${_t23_pattern} -name ${_t23_spec}*.xml -o" done if [ -n "$_t23_pattern" ]; then _t23_pattern="( ${_t23_pattern%-o} )" fi find "$suites_dir/test-2" -name test-2 -o -type d -prune \ -o -name '*.xml' ${_t23_pattern} -print \ | env LC_ALL=C sort \ | { case " $* " in *\ -C\ *) test_cleaner;; *\ -X\ *) test_explanation -o=2.10;; *) test_runner -o=2.10 -t=3.0 "$@" || return $?;; esac; } } test2to3enter() { _t23e_pattern= while read _t23e_spec; do _t23e_spec=${_t23e_spec%.xml} _t23e_spec=${_t23e_spec%\*} _t23e_pattern="${_t23e_pattern} -name ${_t23e_spec}*.xml -o" done if [ -n "$_t23e_pattern" ]; then _t23e_pattern="( ${_t23e_pattern%-o} )" fi find "$suites_dir/test-2-enter" -name test-2-enter -o -type d -prune \ -o -name '*.xml' ${_t23e_pattern} -print \ | env LC_ALL=C sort \ | { case " $* " in *\ -C\ *) test_cleaner;; *\ -X\ *) emit_result "not implemented" "option -X";; *) test_runner -a=2.10-enter -o=2.10 -t=2.10 "$@" || return $?;; esac; } } test2to3leave() { _t23l_pattern= while read _t23l_spec; do _t23l_spec=${_t23l_spec%.xml} _t23l_spec=${_t23l_spec%\*} _t23l_pattern="${_t23l_pattern} -name ${_t23l_spec}*.xml -o" done if [ -n "$_t23l_pattern" ]; then _t23l_pattern="( ${_t23l_pattern%-o} )" fi find "$suites_dir/test-2-leave" -name test-2-leave -o -type d -prune \ -o -name '*.xml' ${_t23l_pattern} -print \ | env LC_ALL=C sort \ | { case " $* " in *\ -C\ *) test_cleaner;; *\ -X\ *) emit_result "not implemented" "option -X";; *) test_runner -a=2.10-leave -o=3.0 -t=3.0 "$@" || return $?;; esac; } } test2to3roundtrip() { _t23rt_pattern= while read _t23tr_spec; do _t23rt_spec=${_t23rt_spec%.xml} _t23rt_spec=${_t23rt_spec%\*} _t23rt_pattern="${_t23rt_pattern} -name ${_t23rt_spec}*.xml -o" done if [ -n "$_t23rt_pattern" ]; then _t23rt_pattern="( ${_t23rt_pattern%-o} )" fi find "$suites_dir/test-2-roundtrip" \ -name test-2-roundtrip -o -type d -prune \ -o -name '*.xml' ${_t23rt_pattern} -print \ | env LC_ALL=C sort \ | { case " $* " in *\ -C\ *) test_cleaner;; *\ -X\ *) emit_result "not implemented" "option -X";; *) test_runner -a=2.10-roundtrip -o=2.10 -t=3.0 "$@" \ || return $?;; esac; } } -# -B -# -D -# -G ... see usage -cts_scheduler() { - # @TODO This test suite yields a great many errors with -G. With some effort - # we could fix it, but it may be better to drop it. - # - # The cts_scheduler suite doesn't run by default. Rather, the user can - # explicitly request to generate reference outputs from cts/scheduler/xml, - # and then test against those reference. Nothing actually requires that we - # do this. We can create regression tests specifically for these schema - # upgrades: in fact, that's what the other test suites are. - - _tcp_mode=0 - _tcp_ret=0 - _tcp_validatewith= - _tcp_schema_o= - _tcp_schema_t= - _tcp_template= - - find "$test_home/scheduler/xml" -name '*.xml' | env LC_ALL=C sort \ - | { case " $* " in - *\ -C\ *) test_cleaner -r;; - *\ -X\ *) emit_result "not implemented" "option -X";; - *) - while [ $# -gt 0 ]; do - case "$1" in - -G) _tcp_mode=$((_tcp_mode | (1 << 0)));; - -D) _tcp_mode=$((_tcp_mode | (1 << 1)));; - -B) _tcp_mode=$((_tcp_mode | (1 << 2)));; - esac - shift - done - while read _tcp_origin; do - _tcp_validatewith=$(${XSLT_PROCESSOR} - "${_tcp_origin}" < - - - - - - - - - - - - - - - - - - - - -EOF -) - _tcp_schema_t=${_tcp_validatewith} - case "${_tcp_validatewith}" in - 1) _tcp_schema_o=1.3;; - 2) _tcp_schema_o=2.10;; - # only for gradual refinement as upgrade-2.10.xsl under - # active development, move to 3.x when schema v4 emerges - 3) _tcp_schema_o=2.10 - _tcp_schema_t=2;; - *) emit_error \ - "need to skip ${_tcp_origin} (schema: ${_tcp_validatewith})" - continue;; - esac - _tcp_template="$PCMK_schema_directory/upgrade-${_tcp_schema_o}.xsl" - _tcp_schema_t="$PCMK_schema_directory/pacemaker-$((_tcp_schema_t + 1)).0.rng" - - if [ "${_tcp_schema_o%%.*}" = "${_tcp_validatewith}" ]; then - _tcp_schema_o="$PCMK_schema_directory/pacemaker-${_tcp_schema_o}.rng" - else - _tcp_schema_o="${_tcp_schema_t}" - fi - - # pre-validate - if [ "$_tcp_schema_o" != "$_tcp_schema_t" ] \ - && ! test_runner_validate "$_tcp_schema_o" "$_tcp_origin"; then - - _tcp_ret=$((_tcp_ret + 1)) - echo "E:pre-validate" - continue - fi - - # upgrade - if [ "$((_tcp_mode & (1 << 0)))" -eq 0 ]; then - ln -fs "$(pwd)/$_tcp_origin" "${_tcp_origin%.*}.ref" - fi - - if ! _tcp_target=$(test_runner_upgrade "${_tcp_template}" \ - "${_tcp_origin}" "${_tcp_mode}"); then - _tcp_ret=$((_tcp_ret + 1)); - - if [ -z "$_tcp_target" ]; then - break - fi - - echo "E:upgrade" - if [ -s "$_tcp_target" ]; then - echo --- - cat "$_tcp_target" || : - echo --- - fi - continue - fi - - if [ "$((_tcp_mode & (1 << 0)))" -eq 0 ]; then - rm -f "${_tcp_origin%.*}.ref" - fi - - # post-validate - if ! test_runner_validate "${_tcp_schema_t}" "${_tcp_target}"; then - _tcp_ret=$((_tcp_ret + 1)); echo "E:post-validate"; continue - fi - - if [ "$((_tcp_mode & (1 << 0)))" -ne 0 ]; then - mv "$_tcp_target" "$_tcp_origin" - fi - - done; log2_or_0_return ${_tcp_ret};; - esac; } -} - # # "framework" # # option-likes ... options to be passed down # argument-likes ... drives a test selection test_suite() { _ts_pass= _ts_select= _ts_select_full= _ts_test_specs= _ts_global_ret=0 _ts_ret=0 while [ $# -gt 0 ]; do case "$1" in -) printf '%s\n' 'waiting for tests specified at stdin...'; while read _ts_spec; do _ts_select="${_ts_spec}@$1" done;; -*) _ts_pass="${_ts_pass} $1";; *) _ts_select_full="${_ts_select_full}@$1" _ts_select="${_ts_select}@${1%%/*}";; esac shift done # _ts_select contains a '@'-delimited list of test suite names from CLI _ts_select="${_ts_select}@" # _ts_select_full contains a '@'-delimited list of test names _ts_select_full="${_ts_select_full}@" for _ts_test in ${tests}; do _ts_test_specs= while true; do case "${_ts_select}" in *@${_ts_test}@*) # A known test suite _ts_test was found in the list of # requested test suites _ts_select. Strip it out of # _ts_select. # # The purpose of this seems to be to prevent the later # _ts_select_full loop from selecting specific tests from # this suite, if the user also requested the entire suite. _ts_test_specs="${_ts_select%%@${_ts_test}@*}"\ "@${_ts_select#*@${_ts_test}@}" if [ "$_ts_test_specs" = "@" ]; then _ts_select= # nothing left else _ts_select="$_ts_test_specs" fi continue ;; @) case "${_ts_test}" in test*) break;; esac # filter ;; esac if [ -n "$_ts_test_specs" ]; then break fi continue 2 # move on to matching with next local test done _ts_test_specs= while true; do case "${_ts_select_full}" in *@${_ts_test}/*) # A test was requested from a known test suite. This does # not mean the requested test actually exists, but rather # that it was requested as the form "/...". # Strip extraneous data from test path _ts_test_full="${_ts_test}/${_ts_select_full#*@${_ts_test}/}" _ts_test_full="${_ts_test_full%%@*}" # Strip the requested test out of _ts_select_full _ts_select_full="${_ts_select_full%%@${_ts_test_full}@*}"\ "@${_ts_select_full#*@${_ts_test_full}@}" # Strip the test suite name and slash from the test spec _ts_test_specs="${_ts_test_specs} ${_ts_test_full#*/}" ;; *) break ;; esac done # Feed the test specs (if any) as stdin to the respective test suite # function _ts_test() for _ts_test_spec in ${_ts_test_specs}; do printf '%s\n' "${_ts_test_spec}" done | "${_ts_test}" ${_ts_pass} || _ts_ret=$? if [ "$_ts_ret" = 0 ]; then emit_result "$_ts_ret" "$_ts_test" else emit_result "at least 2^$((_ts_ret - 1))" "$_ts_test" fi log2_or_0_add ${_ts_global_ret} ${_ts_ret} _ts_global_ret=$? done if [ -n "${_ts_select#@}" ]; then emit_error "Non-existing test(s):$(echo "${_ts_select}" \ | tr '@' ' ')" log2_or_0_add ${_ts_global_ret} 1 || _ts_global_ret=$? fi return ${_ts_global_ret} } # NOTE: big letters are dedicated for per-test-set behaviour, # small ones for generic/global behaviour usage() { printf \ '%s\n%s\n %s\n %s\n %s\n %s\n %s\n %s\n %s\n %s\n' \ "usage: $0 [-{B,C,D,G,X}]* \\" \ " [-|{${tests## }}*]" \ "- when no suites (arguments) provided, \"test*\" ones get used" \ "- with '-' suite specification the actual ones grabbed on stdin" \ "- use '-B' to run validate-only check suppressing blanks first" \ "- use '-C' to only cleanup ephemeral byproducts" \ "- use '-D' to review originals vs. \"referential\" outcomes" \ "- use '-G' to generate \"referential\" outcomes" \ "- use '-X' to show explanatory details about the upgrade" \ "- test specification can be granular, e.g. 'test2to3/022'" } main() { _main_pass= _main_bailout=0 _main_ret=0 while [ $# -gt 0 ]; do case "$1" in -h) usage; exit;; -C|-G|-X) _main_bailout=1;; esac _main_pass="${_main_pass} $1" shift done test_suite ${_main_pass} || _main_ret=$? if [ "$_main_bailout" -eq 0 ]; then test_suite -C $_main_pass >/dev/null || true fi if [ "$_main_ret" = 0 ]; then emit_result "$_main_ret" "Overall suite" else emit_result "at least 2^$((_main_ret - 1))" "Overall suite" fi return ${_main_ret} } main "$@"