diff --git a/lib/pengine/common.c b/lib/pengine/common.c index ec9b843950..becc24f85f 100644 --- a/lib/pengine/common.c +++ b/lib/pengine/common.c @@ -1,561 +1,561 @@ /* * Copyright 2004-2022 the Pacemaker project contributors * * The version control history for this file may have further details. * * This source code is licensed under the GNU Lesser General Public License * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. */ #include #include #include #include #include #include #include gboolean was_processing_error = FALSE; gboolean was_processing_warning = FALSE; static bool check_placement_strategy(const char *value) { return pcmk__strcase_any_of(value, "default", "utilization", "minimal", "balanced", NULL); } static pcmk__cluster_option_t pe_opts[] = { /* name, old name, type, allowed values, * default value, validator, * short description, * long description */ { "no-quorum-policy", NULL, "select", "stop, freeze, ignore, demote, suicide", "stop", pcmk__valid_quorum, N_("What to do when the cluster does not have quorum"), NULL }, { "symmetric-cluster", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("Whether resources can run on any node by default"), NULL }, { "maintenance-mode", NULL, "boolean", NULL, "false", pcmk__valid_boolean, N_("Whether the cluster should refrain from monitoring, starting, " "and stopping resources"), NULL }, { "start-failure-is-fatal", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("Whether a start failure should prevent a resource from being " "recovered on the same node"), N_("When true, the cluster will immediately ban a resource from a node " "if it fails to start there. When false, the cluster will instead " "check the resource's fail count against its migration-threshold.") }, { "enable-startup-probes", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("Whether the cluster should check for active resources during start-up"), NULL }, { XML_CONFIG_ATTR_SHUTDOWN_LOCK, NULL, "boolean", NULL, "false", pcmk__valid_boolean, N_("Whether to lock resources to a cleanly shut down node"), N_("When true, resources active on a node when it is cleanly shut down " "are kept \"locked\" to that node (not allowed to run elsewhere) " "until they start again on that node after it rejoins (or for at " "most shutdown-lock-limit, if set). Stonith resources and " "Pacemaker Remote connections are never locked. Clone and bundle " "instances and the promoted role of promotable clones are currently" " never locked, though support could be added in a future release.") }, { XML_CONFIG_ATTR_SHUTDOWN_LOCK_LIMIT, NULL, "time", NULL, "0", pcmk__valid_interval_spec, N_("Do not lock resources to a cleanly shut down node longer than this"), N_("If shutdown-lock is true and this is set to a nonzero time duration, " "shutdown locks will expire after this much time has passed since " "the shutdown was initiated, even if the node has not rejoined.") }, // Fencing-related options { "stonith-enabled", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("*** Advanced Use Only *** " "Whether nodes may be fenced as part of recovery"), N_("If false, unresponsive nodes are immediately assumed to be harmless, " "and resources that were active on them may be recovered " "elsewhere. This can result in a \"split-brain\" situation, " "potentially leading to data loss and/or service unavailability.") }, { "stonith-action", NULL, "select", "reboot, off, poweroff", "reboot", pcmk__is_fencing_action, N_("Action to send to fence device when a node needs to be fenced " "(\"poweroff\" is a deprecated alias for \"off\")"), NULL }, { "stonith-timeout", NULL, "time", NULL, "60s", pcmk__valid_interval_spec, N_("*** Advanced Use Only *** Unused by Pacemaker"), N_("This value is not used by Pacemaker, but is kept for backward " "compatibility, and certain legacy fence agents might use it.") }, { XML_ATTR_HAVE_WATCHDOG, NULL, "boolean", NULL, "false", pcmk__valid_boolean, N_("Whether watchdog integration is enabled"), N_("This is set automatically by the cluster according to whether SBD " "is detected to be in use. User-configured values are ignored. " "The value `true` is meaningful if diskless SBD is used and " "`stonith-watchdog-timeout` is nonzero. In that case, if fencing " "is required, watchdog-based self-fencing will be performed via " "SBD without requiring a fencing resource explicitly configured.") }, { "concurrent-fencing", NULL, "boolean", NULL, PCMK__CONCURRENT_FENCING_DEFAULT, pcmk__valid_boolean, N_("Allow performing fencing operations in parallel"), NULL }, { "startup-fencing", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("*** Advanced Use Only *** Whether to fence unseen nodes at start-up"), N_("Setting this to false may lead to a \"split-brain\" situation," "potentially leading to data loss and/or service unavailability.") }, { XML_CONFIG_ATTR_PRIORITY_FENCING_DELAY, NULL, "time", NULL, "0", pcmk__valid_interval_spec, N_("Apply fencing delay targeting the lost nodes with the highest total resource priority"), N_("Apply specified delay for the fencings that are targeting the lost " "nodes with the highest total resource priority in case we don't " "have the majority of the nodes in our cluster partition, so that " "the more significant nodes potentially win any fencing match, " "which is especially meaningful under split-brain of 2-node " "cluster. A promoted resource instance takes the base priority + 1 " "on calculation if the base priority is not 0. Any static/random " "delays that are introduced by `pcmk_delay_base/max` configured " "for the corresponding fencing resources will be added to this " "delay. This delay should be significantly greater than, safely " "twice, the maximum `pcmk_delay_base/max`. By default, priority " "fencing delay is disabled.") }, { "cluster-delay", NULL, "time", NULL, "60s", pcmk__valid_interval_spec, N_("Maximum time for node-to-node communication"), N_("The node elected Designated Controller (DC) will consider an action " "failed if it does not get a response from the node executing the " "action within this time (after considering the action's own " "timeout). The \"correct\" value will depend on the speed and " "load of your network and cluster nodes.") }, { "batch-limit", NULL, "integer", NULL, "0", pcmk__valid_number, - "Maximum number of jobs that the cluster may execute in parallel " - "across all nodes", - "The \"correct\" value will depend on the speed and load of your " + N_("Maximum number of jobs that the cluster may execute in parallel " + "across all nodes"), + N_("The \"correct\" value will depend on the speed and load of your " "network and cluster nodes. If set to 0, the cluster will " "impose a dynamically calculated limit when any node has a " - "high load." + "high load.") }, { "migration-limit", NULL, "integer", NULL, "-1", pcmk__valid_number, - "The number of live migration actions that the cluster is allowed " - "to execute in parallel on a node (-1 means no limit)" + N_("The number of live migration actions that the cluster is allowed " + "to execute in parallel on a node (-1 means no limit)") }, /* Orphans and stopping */ { "stop-all-resources", NULL, "boolean", NULL, "false", pcmk__valid_boolean, N_("Whether the cluster should stop all active resources"), NULL }, { "stop-orphan-resources", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("Whether to stop resources that were removed from the configuration"), NULL }, { "stop-orphan-actions", NULL, "boolean", NULL, "true", pcmk__valid_boolean, N_("Whether to cancel recurring actions removed from the configuration"), NULL }, { "remove-after-stop", NULL, "boolean", NULL, "false", pcmk__valid_boolean, N_("*** Deprecated *** Whether to remove stopped resources from " "the executor"), - "Values other than default are poorly tested and potentially dangerous." - " This option will be removed in a future release." + N_("Values other than default are poorly tested and potentially dangerous." + " This option will be removed in a future release.") }, /* Storing inputs */ { "pe-error-series-max", NULL, "integer", NULL, "-1", pcmk__valid_number, "The number of scheduler inputs resulting in errors to save", "Zero to disable, -1 to store unlimited." }, { "pe-warn-series-max", NULL, "integer", NULL, "5000", pcmk__valid_number, "The number of scheduler inputs resulting in warnings to save", "Zero to disable, -1 to store unlimited." }, { "pe-input-series-max", NULL, "integer", NULL, "4000", pcmk__valid_number, "The number of scheduler inputs without errors or warnings to save", "Zero to disable, -1 to store unlimited." }, /* Node health */ { PCMK__OPT_NODE_HEALTH_STRATEGY, NULL, "select", PCMK__VALUE_NONE ", " PCMK__VALUE_MIGRATE_ON_RED ", " PCMK__VALUE_ONLY_GREEN ", " PCMK__VALUE_PROGRESSIVE ", " PCMK__VALUE_CUSTOM, PCMK__VALUE_NONE, pcmk__validate_health_strategy, N_("How cluster should react to node health attributes"), N_("Requires external entities to create node attributes (named with " "the prefix \"#health\") with values \"red\", " "\"yellow\", or \"green\".") }, { PCMK__OPT_NODE_HEALTH_BASE, NULL, "integer", NULL, "0", pcmk__valid_number, N_("Base health score assigned to a node"), N_("Only used when \"node-health-strategy\" is set to \"progressive\".") }, { PCMK__OPT_NODE_HEALTH_GREEN, NULL, "integer", NULL, "0", pcmk__valid_number, N_("The score to use for a node health attribute whose value is \"green\""), N_("Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive\".") }, { PCMK__OPT_NODE_HEALTH_YELLOW, NULL, "integer", NULL, "0", pcmk__valid_number, N_("The score to use for a node health attribute whose value is \"yellow\""), N_("Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive\".") }, { PCMK__OPT_NODE_HEALTH_RED, NULL, "integer", NULL, "-INFINITY", pcmk__valid_number, N_("The score to use for a node health attribute whose value is \"red\""), N_("Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive\".") }, /*Placement Strategy*/ { "placement-strategy", NULL, "select", "default, utilization, minimal, balanced", "default", check_placement_strategy, N_("How the cluster should allocate resources to nodes"), NULL }, }; void pe_metadata(pcmk__output_t *out) { const char *desc_short = "Pacemaker scheduler options"; const char *desc_long = "Cluster options used by Pacemaker's scheduler"; gchar *s = pcmk__format_option_metadata("pacemaker-schedulerd", desc_short, desc_long, pe_opts, PCMK__NELEM(pe_opts)); out->output_xml(out, "metadata", s); g_free(s); } void verify_pe_options(GHashTable * options) { pcmk__validate_cluster_options(options, pe_opts, PCMK__NELEM(pe_opts)); } const char * pe_pref(GHashTable * options, const char *name) { return pcmk__cluster_option(options, pe_opts, PCMK__NELEM(pe_opts), name); } const char * fail2text(enum action_fail_response fail) { const char *result = ""; switch (fail) { case action_fail_ignore: result = "ignore"; break; case action_fail_demote: result = "demote"; break; case action_fail_block: result = "block"; break; case action_fail_recover: result = "recover"; break; case action_fail_migrate: result = "migrate"; break; case action_fail_stop: result = "stop"; break; case action_fail_fence: result = "fence"; break; case action_fail_standby: result = "standby"; break; case action_fail_restart_container: result = "restart-container"; break; case action_fail_reset_remote: result = "reset-remote"; break; } return result; } enum action_tasks text2task(const char *task) { if (pcmk__str_eq(task, CRMD_ACTION_STOP, pcmk__str_casei)) { return stop_rsc; } else if (pcmk__str_eq(task, CRMD_ACTION_STOPPED, pcmk__str_casei)) { return stopped_rsc; } else if (pcmk__str_eq(task, CRMD_ACTION_START, pcmk__str_casei)) { return start_rsc; } else if (pcmk__str_eq(task, CRMD_ACTION_STARTED, pcmk__str_casei)) { return started_rsc; } else if (pcmk__str_eq(task, CRM_OP_SHUTDOWN, pcmk__str_casei)) { return shutdown_crm; } else if (pcmk__str_eq(task, CRM_OP_FENCE, pcmk__str_casei)) { return stonith_node; } else if (pcmk__str_eq(task, CRMD_ACTION_STATUS, pcmk__str_casei)) { return monitor_rsc; } else if (pcmk__str_eq(task, CRMD_ACTION_NOTIFY, pcmk__str_casei)) { return action_notify; } else if (pcmk__str_eq(task, CRMD_ACTION_NOTIFIED, pcmk__str_casei)) { return action_notified; } else if (pcmk__str_eq(task, CRMD_ACTION_PROMOTE, pcmk__str_casei)) { return action_promote; } else if (pcmk__str_eq(task, CRMD_ACTION_DEMOTE, pcmk__str_casei)) { return action_demote; } else if (pcmk__str_eq(task, CRMD_ACTION_PROMOTED, pcmk__str_casei)) { return action_promoted; } else if (pcmk__str_eq(task, CRMD_ACTION_DEMOTED, pcmk__str_casei)) { return action_demoted; } #if SUPPORT_TRACING if (pcmk__str_eq(task, CRMD_ACTION_CANCEL, pcmk__str_casei)) { return no_action; } else if (pcmk__str_eq(task, CRMD_ACTION_DELETE, pcmk__str_casei)) { return no_action; } else if (pcmk__str_eq(task, CRMD_ACTION_STATUS, pcmk__str_casei)) { return no_action; } else if (pcmk__str_eq(task, CRMD_ACTION_MIGRATE, pcmk__str_casei)) { return no_action; } else if (pcmk__str_eq(task, CRMD_ACTION_MIGRATED, pcmk__str_casei)) { return no_action; } crm_trace("Unsupported action: %s", task); #endif return no_action; } const char * task2text(enum action_tasks task) { const char *result = ""; switch (task) { case no_action: result = "no_action"; break; case stop_rsc: result = CRMD_ACTION_STOP; break; case stopped_rsc: result = CRMD_ACTION_STOPPED; break; case start_rsc: result = CRMD_ACTION_START; break; case started_rsc: result = CRMD_ACTION_STARTED; break; case shutdown_crm: result = CRM_OP_SHUTDOWN; break; case stonith_node: result = CRM_OP_FENCE; break; case monitor_rsc: result = CRMD_ACTION_STATUS; break; case action_notify: result = CRMD_ACTION_NOTIFY; break; case action_notified: result = CRMD_ACTION_NOTIFIED; break; case action_promote: result = CRMD_ACTION_PROMOTE; break; case action_promoted: result = CRMD_ACTION_PROMOTED; break; case action_demote: result = CRMD_ACTION_DEMOTE; break; case action_demoted: result = CRMD_ACTION_DEMOTED; break; } return result; } const char * role2text(enum rsc_role_e role) { switch (role) { case RSC_ROLE_UNKNOWN: return RSC_ROLE_UNKNOWN_S; case RSC_ROLE_STOPPED: return RSC_ROLE_STOPPED_S; case RSC_ROLE_STARTED: return RSC_ROLE_STARTED_S; case RSC_ROLE_UNPROMOTED: #ifdef PCMK__COMPAT_2_0 return RSC_ROLE_UNPROMOTED_LEGACY_S; #else return RSC_ROLE_UNPROMOTED_S; #endif case RSC_ROLE_PROMOTED: #ifdef PCMK__COMPAT_2_0 return RSC_ROLE_PROMOTED_LEGACY_S; #else return RSC_ROLE_PROMOTED_S; #endif } CRM_CHECK(role >= RSC_ROLE_UNKNOWN, return RSC_ROLE_UNKNOWN_S); CRM_CHECK(role < RSC_ROLE_MAX, return RSC_ROLE_UNKNOWN_S); // coverity[dead_error_line] return RSC_ROLE_UNKNOWN_S; } enum rsc_role_e text2role(const char *role) { CRM_ASSERT(role != NULL); if (pcmk__str_eq(role, RSC_ROLE_STOPPED_S, pcmk__str_casei)) { return RSC_ROLE_STOPPED; } else if (pcmk__str_eq(role, RSC_ROLE_STARTED_S, pcmk__str_casei)) { return RSC_ROLE_STARTED; } else if (pcmk__strcase_any_of(role, RSC_ROLE_UNPROMOTED_S, RSC_ROLE_UNPROMOTED_LEGACY_S, NULL)) { return RSC_ROLE_UNPROMOTED; } else if (pcmk__strcase_any_of(role, RSC_ROLE_PROMOTED_S, RSC_ROLE_PROMOTED_LEGACY_S, NULL)) { return RSC_ROLE_PROMOTED; } else if (pcmk__str_eq(role, RSC_ROLE_UNKNOWN_S, pcmk__str_casei)) { return RSC_ROLE_UNKNOWN; } crm_err("Unknown role: %s", role); return RSC_ROLE_UNKNOWN; } void add_hash_param(GHashTable * hash, const char *name, const char *value) { CRM_CHECK(hash != NULL, return); crm_trace("Adding name='%s' value='%s' to hash table", pcmk__s(name, ""), pcmk__s(value, "")); if (name == NULL || value == NULL) { return; } else if (pcmk__str_eq(value, "#default", pcmk__str_casei)) { return; } else if (g_hash_table_lookup(hash, name) == NULL) { g_hash_table_insert(hash, strdup(name), strdup(value)); } } const char * pe_node_attribute_calculated(const pe_node_t *node, const char *name, const pe_resource_t *rsc) { const char *source; if(node == NULL) { return NULL; } else if(rsc == NULL) { return g_hash_table_lookup(node->details->attrs, name); } source = g_hash_table_lookup(rsc->meta, XML_RSC_ATTR_TARGET); if(source == NULL || !pcmk__str_eq("host", source, pcmk__str_casei)) { return g_hash_table_lookup(node->details->attrs, name); } /* Use attributes set for the containers location * instead of for the container itself * * Useful when the container is using the host's local * storage */ CRM_ASSERT(node->details->remote_rsc); CRM_ASSERT(node->details->remote_rsc->container); if(node->details->remote_rsc->container->running_on) { pe_node_t *host = node->details->remote_rsc->container->running_on->data; pe_rsc_trace(rsc, "%s: Looking for %s on the container host %s", rsc->id, name, pe__node_name(host)); return g_hash_table_lookup(host->details->attrs, name); } pe_rsc_trace(rsc, "%s: Not looking for %s on the container host: %s is inactive", rsc->id, name, node->details->remote_rsc->container->id); return NULL; } const char * pe_node_attribute_raw(const pe_node_t *node, const char *name) { if(node == NULL) { return NULL; } return g_hash_table_lookup(node->details->attrs, name); } diff --git a/po/zh_CN.po b/po/zh_CN.po index 20bd50427b..f4ac43a6d4 100644 --- a/po/zh_CN.po +++ b/po/zh_CN.po @@ -1,1061 +1,1089 @@ # # Copyright 2003-2022 the Pacemaker project contributors # # The version control history for this file may have further details. # # This source code is licensed under the GNU Lesser General Public License # version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: Pacemaker 2\n" "Report-Msgid-Bugs-To: developers@clusterlabs.org\n" -"POT-Creation-Date: 2022-12-02 10:26+0800\n" +"POT-Creation-Date: 2022-12-14 15:58+0800\n" "PO-Revision-Date: 2021-11-08 11:04+0800\n" "Last-Translator: Vivi \n" "Language-Team: CHINESE \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: daemons/controld/controld_control.c:531 msgid "Pacemaker version on cluster node elected Designated Controller (DC)" msgstr "集群选定的控制器节点(DC)的 Pacemaker 版本" #: daemons/controld/controld_control.c:532 msgid "" "Includes a hash which identifies the exact changeset the code was built " "from. Used for diagnostic purposes." msgstr "它包含一个标识所构建代码变更版本的哈希值，其可用于诊断。" #: daemons/controld/controld_control.c:537 msgid "The messaging stack on which Pacemaker is currently running" msgstr "Pacemaker 正在使用的消息传输引擎" #: daemons/controld/controld_control.c:538 msgid "Used for informational and diagnostic purposes." msgstr "用于提供信息和诊断。" #: daemons/controld/controld_control.c:542 msgid "An arbitrary name for the cluster" msgstr "任意的集群名称" #: daemons/controld/controld_control.c:543 msgid "" "This optional value is mostly for users' convenience as desired in " "administration, but may also be used in Pacemaker configuration rules via " "the #cluster-name node attribute, and by higher-level tools and resource " "agents." msgstr "" "该可选值主要是为了方便用户管理使用，也可以在pacemaker 配置规则中通过 " "#cluster-name 节点属性配置使用，也可以通过高级工具和资源代理使用。" #: daemons/controld/controld_control.c:551 msgid "How long to wait for a response from other nodes during start-up" msgstr "启动过程中等待其他节点响应的时间" #: daemons/controld/controld_control.c:552 msgid "" "The optimal value will depend on the speed and load of your network and the " "type of switches used." msgstr "其最佳值将取决于你的网络速度和负载以及所用交换机的类型。" #: daemons/controld/controld_control.c:557 msgid "" "Zero disables polling, while positive values are an interval in " "seconds(unless other units are specified, for example \"5min\")" msgstr "" "设置为0将禁用轮询，设置为正数将是以秒为单位的时间间隔（除非使用了其他单位，比" "如\"5min\"表示5分钟）" #: daemons/controld/controld_control.c:560 msgid "" "Polling interval to recheck cluster state and evaluate rules with date " "specifications" msgstr "重新检查集群状态并且评估具有日期规格的配置规则的轮询间隔" #: daemons/controld/controld_control.c:562 msgid "" "Pacemaker is primarily event-driven, and looks ahead to know when to recheck " "cluster state for failure timeouts and most time-based rules. However, it " "will also recheck the cluster after this amount of inactivity, to evaluate " "rules with date specifications and serve as a fail-safe for certain types of " "scheduler bugs." msgstr "" "Pacemaker 主要是通过事件驱动的，并能预期重新检查集群状态以评估大多数基于时间" "的规则以及过期的错误。然而无论如何，在集群经过该时间间隔的不活动状态后，它还" "将重新检查集群，以评估具有日期规格的规则，并为某些类型的调度程序缺陷提供故障" "保护。" #: daemons/controld/controld_control.c:571 msgid "Maximum amount of system load that should be used by cluster nodes" msgstr "集群节点应该使用的最大系统负载量" #: daemons/controld/controld_control.c:572 msgid "" "The cluster will slow down its recovery process when the amount of system " "resources used (currently CPU) approaches this limit" msgstr "当使用的系统资源量（当前为CPU）接近此限制时，集群将减慢其恢复过程" #: daemons/controld/controld_control.c:578 msgid "" "Maximum number of jobs that can be scheduled per node (defaults to 2x cores)" msgstr "每个节点可以调度的最大作业数（默认为2x内核数）" #: daemons/controld/controld_control.c:582 msgid "How a cluster node should react if notified of its own fencing" msgstr "集群节点在收到针对自己的 fence 操作结果通知时应如何反应" #: daemons/controld/controld_control.c:583 msgid "" "A cluster node may receive notification of its own fencing if fencing is " "misconfigured, or if fabric fencing is in use that doesn't cut cluster " "communication. Allowed values are \"stop\" to attempt to immediately stop " "Pacemaker and stay stopped, or \"panic\" to attempt to immediately reboot " "the local node, falling back to stop on failure." msgstr "" "如果有错误的 fence 配置，或者在使用 fabric fence 机制 (并不会切断集群通信），" "则集群节点可能会收到针对自己的 fence 结果通知。允许的值为 \"stop\" 尝试立即停" "止 pacemaker 并保持停用状态,或者 \"panic\" 尝试立即重新启动本地节点，并在失败" "时返回执行stop。" #: daemons/controld/controld_control.c:593 msgid "" "Declare an election failed if it is not decided within this much time. If " "you need to adjust this value, it probably indicates the presence of a bug." msgstr "" "如果集群在本项设置时间内没有作出决定则宣布选举失败。如果您需要调整该值，这可" "能代表存在某些缺陷。" #: daemons/controld/controld_control.c:601 msgid "" "Exit immediately if shutdown does not complete within this much time. If you " "need to adjust this value, it probably indicates the presence of a bug." msgstr "" "如果在这段时间内关机仍未完成，则立即退出。如果您需要调整该值，这可能代表存在" "某些缺陷。" #: daemons/controld/controld_control.c:609 #: daemons/controld/controld_control.c:616 msgid "" "If you need to adjust this value, it probably indicates the presence of a " "bug." msgstr "如果您需要调整该值，这可能代表存在某些缺陷。" #: daemons/controld/controld_control.c:622 msgid "" "*** Advanced Use Only *** Enabling this option will slow down cluster " "recovery under all conditions" msgstr "*** Advanced Use Only *** 启用此选项将在所有情况下减慢集群恢复的速度" #: daemons/controld/controld_control.c:624 msgid "" "Delay cluster recovery for this much time to allow for additional events to " "occur. Useful if your configuration is sensitive to the order in which ping " "updates arrive." msgstr "" "集群恢复将被推迟指定的时间间隔，以等待更多事件发生。如果您的配置对 ping 更新" "到达的顺序很敏感，这就很有用" #: daemons/controld/controld_control.c:631 #, fuzzy msgid "" "How long before nodes can be assumed to be safely down when watchdog-based " "self-fencing via SBD is in use" msgstr "" "当基于 watchdog 的自我 fence 机制通过SBD 被执行时，我们可以假设节点安全关闭之" "前需要等待多长时间" #: daemons/controld/controld_control.c:633 msgid "" "If this is set to a positive value, lost nodes are assumed to self-fence " "using watchdog-based SBD within this much time. This does not require a " "fencing resource to be explicitly configured, though a fence_watchdog " "resource can be configured, to limit use to specific nodes. If this is set " "to 0 (the default), the cluster will never assume watchdog-based self-" "fencing. If this is set to a negative value, the cluster will use twice the " "local value of the `SBD_WATCHDOG_TIMEOUT` environment variable if that is " "positive, or otherwise treat this as 0. WARNING: When used, this timeout " "must be larger than `SBD_WATCHDOG_TIMEOUT` on all nodes that use watchdog-" "based SBD, and Pacemaker will refuse to start on any of those nodes where " "this is not true for the local value or SBD is not active. When this is set " "to a negative value, `SBD_WATCHDOG_TIMEOUT` must be set to the same value on " "all nodes that use SBD, otherwise data corruption or loss could occur." msgstr "" "如果设置为正值，则假定丢失的节点在这段时间内使用基于watchdog的SBD进行自我防" "护。这不需要明确配置fence资源，但可以配置一个fence_watchdog资源，以限制特定节" "点的使用。如果设置为0（默认值），集群将永远不会假定基于watchdog的自我防护。如" "果设置为负值，且如果`SBD_WATCHDOG_TIMEOUT`环境变量的本地值为正值，则集群将使" "用该值的两倍，否则将其视为0。警告：在使用基于watchdog的SBD的所有节点上，此超" "时必须大于`SBD_WATCGDOG_TIMEOUT`,如果本地值不是这样，或者SBD未运行，则" "Pacemaker将拒绝在任何节点上启动。如果设置为负值，则在使用SBD的所有节点上，" "`SBD_WATCHDOG_TIMEOUT`必须设置为相同的值，否则可能会发生数据损坏或丢失。" #: daemons/controld/controld_control.c:652 msgid "" "How many times fencing can fail before it will no longer be immediately re-" "attempted on a target" msgstr "fence操作失败多少次会停止立即尝试" #: daemons/fenced/pacemaker-fenced.c:1378 msgid "Advanced use only: An alternate parameter to supply instead of 'port'" msgstr "仅高级使用：使用替代的参数名，而不是'port'" #: daemons/fenced/pacemaker-fenced.c:1379 msgid "" "some devices do not support the standard 'port' parameter or may provide " "additional ones. Use this to specify an alternate, device-specific, " "parameter that should indicate the machine to be fenced. A value of none can " "be used to tell the cluster not to supply any additional parameters." msgstr "" "一些设备不支持标准的'port'参数，或者可能提供其他参数。使用此选项可指定一个该" "设备专用的参数名，该参数用于标识需要fence的机器。值none可以用于告诉集群不要提" "供任何其他的参数。" #: daemons/fenced/pacemaker-fenced.c:1388 msgid "" "A mapping of host names to ports numbers for devices that do not support " "host names." msgstr "为不支持主机名的设备提供主机名到端口号的映射。" #: daemons/fenced/pacemaker-fenced.c:1389 msgid "" "Eg. node1:1;node2:2,3 would tell the cluster to use port 1 for node1 and " "ports 2 and 3 for node2" msgstr "" "例如 node1:1;node2:2,3，将会告诉集群对node1使用端口1,对node2使用端口2和3 " #: daemons/fenced/pacemaker-fenced.c:1393 msgid "Eg. node1,node2,node3" msgstr "例如 node1,node2,node3" #: daemons/fenced/pacemaker-fenced.c:1394 msgid "" "A list of machines controlled by this device (Optional unless " "pcmk_host_list=static-list)" msgstr "该设备控制的机器列表(可选参数，除非 pcmk_host_list 设置为 static-list)" #: daemons/fenced/pacemaker-fenced.c:1399 msgid "How to determine which machines are controlled by the device." msgstr "如何确定设备控制哪些机器。" #: daemons/fenced/pacemaker-fenced.c:1400 msgid "" "Allowed values: dynamic-list (query the device via the 'list' command), " "static-list (check the pcmk_host_list attribute), status (query the device " "via the 'status' command), none (assume every device can fence every machine)" msgstr "" "允许的值：dynamic-list（通过'list'命令查询设备），static-list（检查" "pcmk_host_list属性），status（通过'status'命令查询设备），none（假设每个设备" "都可fence 每台机器 ）" #: daemons/fenced/pacemaker-fenced.c:1409 #: daemons/fenced/pacemaker-fenced.c:1418 msgid "Enable a base delay for fencing actions and specify base delay value." msgstr "在执行 fencing 操作前启用不超过指定时间的延迟。" #: daemons/fenced/pacemaker-fenced.c:1410 msgid "" "Enable a delay of no more than the time specified before executing fencing " "actions. Pacemaker derives the overall delay by taking the value of " "pcmk_delay_base and adding a random delay value such that the sum is kept " "below this maximum." msgstr "" "在执行 fencing 操作前启用不超过指定时间的延迟。 Pacemaker通过获取" "pcmk_delay_base的值并添加随机延迟值来得出总体延迟,从而使总和保持在此最大值以" "下。" #: daemons/fenced/pacemaker-fenced.c:1420 msgid "" "This enables a static delay for fencing actions, which can help avoid " "\"death matches\" where two nodes try to fence each other at the same time. " "If pcmk_delay_max is also used, a random delay will be added such that the " "total delay is kept below that value.This can be set to a single time value " "to apply to any node targeted by this device (useful if a separate device is " "configured for each target), or to a node map (for example, \"node1:1s;" "node2:5\") to set a different value per target." msgstr "" "这使fencing 操作启用静态延迟，这可以帮助避免\"death matches\"即两个节点试图同" "时互相fence.如果还使用了pcmk_delay_max，则将添加随机延迟，以使总延迟保持在该" "值以下。可以将其设置为单个时间值，以应用于该设备针对的任何节点（适用于为每个" "目标分别配置了各自的设备的情况）， 或着设置为一个节点映射 （例如，\"node1:1s;" "node2:5\"）从而为每个目标设置不同值。" #: daemons/fenced/pacemaker-fenced.c:1432 msgid "" "The maximum number of actions can be performed in parallel on this device" msgstr "可以在该设备上并发执行的最多操作数量" #: daemons/fenced/pacemaker-fenced.c:1433 msgid "" "Cluster property concurrent-fencing=true needs to be configured first.Then " "use this to specify the maximum number of actions can be performed in " "parallel on this device. -1 is unlimited." msgstr "" "需要首先配置集群属性 concurrent-fencing=true 。然后使用此参数指定可以在该设备" "上并发执行的最多操作数量。 -1 代表没有限制" #: daemons/fenced/pacemaker-fenced.c:1438 msgid "Advanced use only: An alternate command to run instead of 'reboot'" msgstr "仅高级使用：运行替代命令，而不是'reboot'" #: daemons/fenced/pacemaker-fenced.c:1439 msgid "" "Some devices do not support the standard commands or may provide additional " "ones.\n" "Use this to specify an alternate, device-specific, command that implements " "the 'reboot' action." msgstr "" "一些设备不支持标准命令或可能提供其他命令，使用此选项可以指定一个该设备特定的" "替代命令，用来实现'reboot'操作。" #: daemons/fenced/pacemaker-fenced.c:1444 msgid "" "Advanced use only: Specify an alternate timeout to use for reboot actions " "instead of stonith-timeout" msgstr "仅高级使用：指定用于'reboot' 操作的替代超时，而不是stonith-timeout" #: daemons/fenced/pacemaker-fenced.c:1445 msgid "" "Some devices need much more/less time to complete than normal.Use this to " "specify an alternate, device-specific, timeout for 'reboot' actions." msgstr "" "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用" "于'reboot'操作的该设备特定的替代超时。" #: daemons/fenced/pacemaker-fenced.c:1450 msgid "" "Advanced use only: The maximum number of times to retry the 'reboot' command " "within the timeout period" msgstr "仅高级使用：在超时前重试'reboot'命令的最大次数" #: daemons/fenced/pacemaker-fenced.c:1451 msgid "" "Some devices do not support multiple connections. Operations may 'fail' if " "the device is busy with another task so Pacemaker will automatically retry " "the operation, if there is time remaining. Use this option to alter the " "number of times Pacemaker retries 'reboot' actions before giving up." msgstr "" "一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ，因此" "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重" "试'reboot' 操作的次数." #: daemons/fenced/pacemaker-fenced.c:1457 msgid "Advanced use only: An alternate command to run instead of 'off'" msgstr "仅高级使用：运行替代命令，而不是'off'" #: daemons/fenced/pacemaker-fenced.c:1458 msgid "" "Some devices do not support the standard commands or may provide additional " "ones.Use this to specify an alternate, device-specific, command that " "implements the 'off' action." msgstr "" "一些设备不支持标准命令或可能提供其他命令,使用此选项可指定一个该设备专用的替代" "命令，用来实现'off'操作。" #: daemons/fenced/pacemaker-fenced.c:1463 msgid "" "Advanced use only: Specify an alternate timeout to use for off actions " "instead of stonith-timeout" msgstr "仅高级使用：指定用于off 操作的替代超时，而不是stonith-timeout" #: daemons/fenced/pacemaker-fenced.c:1464 msgid "" "Some devices need much more/less time to complete than normal.Use this to " "specify an alternate, device-specific, timeout for 'off' actions." msgstr "" "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用" "于'off'操作的该设备特定的替代超时。" #: daemons/fenced/pacemaker-fenced.c:1469 msgid "" "Advanced use only: The maximum number of times to retry the 'off' command " "within the timeout period" msgstr "仅高级使用：在超时前重试'off'命令的最大次数" #: daemons/fenced/pacemaker-fenced.c:1470 msgid "" "Some devices do not support multiple connections. Operations may 'fail' if " "the device is busy with another task so Pacemaker will automatically retry " "the operation, if there is time remaining. Use this option to alter the " "number of times Pacemaker retries 'off' actions before giving up." msgstr "" " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此" "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重" "试'off' 操作的次数." #: daemons/fenced/pacemaker-fenced.c:1476 msgid "Advanced use only: An alternate command to run instead of 'on'" msgstr "仅高级使用：运行替代命令，而不是'on'" #: daemons/fenced/pacemaker-fenced.c:1477 msgid "" "Some devices do not support the standard commands or may provide additional " "ones.Use this to specify an alternate, device-specific, command that " "implements the 'on' action." msgstr "" "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替" "代命令，用来实现'on'操作。" #: daemons/fenced/pacemaker-fenced.c:1482 msgid "" "Advanced use only: Specify an alternate timeout to use for on actions " "instead of stonith-timeout" msgstr "仅高级使用：指定用于on 操作的替代超时，而不是stonith-timeout" #: daemons/fenced/pacemaker-fenced.c:1483 msgid "" "Some devices need much more/less time to complete than normal.Use this to " "specify an alternate, device-specific, timeout for 'on' actions." msgstr "" "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用" "于'on'操作的该设备特定的替代超时。" #: daemons/fenced/pacemaker-fenced.c:1488 msgid "" "Advanced use only: The maximum number of times to retry the 'on' command " "within the timeout period" msgstr "仅高级使用：在超时前重试'on'命令的最大次数" #: daemons/fenced/pacemaker-fenced.c:1489 msgid "" "Some devices do not support multiple connections. Operations may 'fail' if " "the device is busy with another task so Pacemaker will automatically retry " "the operation, if there is time remaining. Use this option to alter the " "number of times Pacemaker retries 'on' actions before giving up." msgstr "" " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此" "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重" "试'on' 操作的次数." #: daemons/fenced/pacemaker-fenced.c:1495 msgid "Advanced use only: An alternate command to run instead of 'list'" msgstr "仅高级使用：运行替代命令，而不是'list'" #: daemons/fenced/pacemaker-fenced.c:1496 msgid "" "Some devices do not support the standard commands or may provide additional " "ones.Use this to specify an alternate, device-specific, command that " "implements the 'list' action." msgstr "" "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替" "代命令，用来实现'list'操作。" #: daemons/fenced/pacemaker-fenced.c:1501 msgid "" "Advanced use only: Specify an alternate timeout to use for list actions " "instead of stonith-timeout" msgstr "仅高级使用：指定用于list 操作的替代超时，而不是stonith-timeout" #: daemons/fenced/pacemaker-fenced.c:1502 msgid "" "Some devices need much more/less time to complete than normal.Use this to " "specify an alternate, device-specific, timeout for 'list' actions." msgstr "" "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用" "于'list'操作的该设备特定的替代超时。" #: daemons/fenced/pacemaker-fenced.c:1507 msgid "" "Advanced use only: The maximum number of times to retry the 'list' command " "within the timeout period" msgstr "仅高级使用：在超时前重试'list'命令的最大次数" #: daemons/fenced/pacemaker-fenced.c:1508 msgid "" "Some devices do not support multiple connections. Operations may 'fail' if " "the device is busy with another task so Pacemaker will automatically retry " "the operation, if there is time remaining. Use this option to alter the " "number of times Pacemaker retries 'list' actions before giving up." msgstr "" " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此" "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重" "试'list' 操作的次数." #: daemons/fenced/pacemaker-fenced.c:1514 msgid "Advanced use only: An alternate command to run instead of 'monitor'" msgstr "仅高级使用：运行替代命令，而不是'monitor'" #: daemons/fenced/pacemaker-fenced.c:1515 msgid "" "Some devices do not support the standard commands or may provide additional " "ones.Use this to specify an alternate, device-specific, command that " "implements the 'monitor' action." msgstr "" "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替" "代命令，用来实现'monitor'操作。" #: daemons/fenced/pacemaker-fenced.c:1520 msgid "" "Advanced use only: Specify an alternate timeout to use for monitor actions " "instead of stonith-timeout" msgstr "仅高级使用：指定用于monitor 操作的替代超时，而不是stonith-timeout" #: daemons/fenced/pacemaker-fenced.c:1521 msgid "" "Some devices need much more/less time to complete than normal.\n" "Use this to specify an alternate, device-specific, timeout for 'monitor' " "actions." msgstr "" "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用" "于'monitor'操作的该设备特定的替代超时。" #: daemons/fenced/pacemaker-fenced.c:1526 msgid "" "Advanced use only: The maximum number of times to retry the 'monitor' " "command within the timeout period" msgstr "仅高级使用：在超时前重试'monitor'命令的最大次数" #: daemons/fenced/pacemaker-fenced.c:1527 msgid "" "Some devices do not support multiple connections. Operations may 'fail' if " "the device is busy with another task so Pacemaker will automatically retry " "the operation, if there is time remaining. Use this option to alter the " "number of times Pacemaker retries 'monitor' actions before giving up." msgstr "" " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此" "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重" "试'monitor' 操作的次数." #: daemons/fenced/pacemaker-fenced.c:1533 msgid "Advanced use only: An alternate command to run instead of 'status'" msgstr "仅高级使用：运行替代命令，而不是'status'" #: daemons/fenced/pacemaker-fenced.c:1534 msgid "" "Some devices do not support the standard commands or may provide additional " "ones.Use this to specify an alternate, device-specific, command that " "implements the 'status' action." msgstr "" "一些设备不支持标准命令或可能提供其他命令，使用此选项可指定一个该设备特定的替" "代命令，用来实现'status'操作。" #: daemons/fenced/pacemaker-fenced.c:1539 msgid "" "Advanced use only: Specify an alternate timeout to use for status actions " "instead of stonith-timeout" msgstr "仅高级使用：指定用于status 操作的替代超时，而不是stonith-timeout" #: daemons/fenced/pacemaker-fenced.c:1540 msgid "" "Some devices need much more/less time to complete than normal.Use this to " "specify an alternate, device-specific, timeout for 'status' actions." msgstr "" "一些设备需要比正常情况下更多或更少的时间来完成操作，使用此选项指定一个用" "于'status'操作的该设备特定的替代超时" #: daemons/fenced/pacemaker-fenced.c:1545 msgid "" "Advanced use only: The maximum number of times to retry the 'status' command " "within the timeout period" msgstr "仅高级使用：在超时前重试'status'命令的最大次数" #: daemons/fenced/pacemaker-fenced.c:1546 msgid "" "Some devices do not support multiple connections. Operations may 'fail' if " "the device is busy with another task so Pacemaker will automatically retry " "the operation, if there is time remaining. Use this option to alter the " "number of times Pacemaker retries 'status' actions before giving up." msgstr "" " 一些设备不支持多个连接。 如果设备忙于另一个任务，则操作可能会'失败' ， 因此" "Pacemaker将自动重试（如果时间允许）。 使用此选项更改Pacemaker在放弃之前重" "试'status' 操作的次数." #: daemons/fenced/pacemaker-fenced.c:1555 msgid "Instance attributes available for all \"stonith\"-class resources" msgstr " 可用于所有stonith类资源的实例属性" #: daemons/fenced/pacemaker-fenced.c:1557 msgid "" "Instance attributes available for all \"stonith\"-class resources and used " "by Pacemaker's fence daemon, formerly known as stonithd" msgstr "" " 可用于所有stonith类资源的实例属性，并由Pacemaker的fence守护程序使用（以前称" "为stonithd)" #: lib/cib/cib_utils.c:559 msgid "Enable Access Control Lists (ACLs) for the CIB" msgstr "为CIB启用访问控制列表(ACL)" #: lib/cib/cib_utils.c:565 msgid "Maximum IPC message backlog before disconnecting a cluster daemon" msgstr "断开集群守护程序之前的最大IPC消息积压" #: lib/cib/cib_utils.c:566 msgid "" "Raise this if log has \"Evicting client\" messages for cluster daemon PIDs " "(a good value is the number of resources in the cluster multiplied by the " "number of nodes)." msgstr "" "如果日志中有针对集群守护程序PID的消息“Evicting client”，（则建议将值设为集群" "中的资源数量乘以节点数量）" -#: lib/common/options.c:633 +#: lib/common/options.c:401 msgid " Allowed values: " msgstr " 允许的值: " #: lib/common/cmdline.c:70 msgid "Display software version and exit" msgstr "显示软件版本信息" #: lib/common/cmdline.c:73 msgid "Increase debug output (may be specified multiple times)" msgstr "显示更多调试信息（可多次指定）" #: lib/common/cmdline.c:92 msgid "FORMAT" msgstr "格式" #: lib/common/cmdline.c:94 msgid "Specify file name for output (or \"-\" for stdout)" msgstr "指定输出的文件名 或指定'-' 表示标准输出" #: lib/common/cmdline.c:94 msgid "DEST" msgstr "目标" #: lib/common/cmdline.c:100 msgid "Output Options:" msgstr "输出选项" #: lib/common/cmdline.c:100 msgid "Show output help" msgstr "显示输出帮助" #: lib/pengine/common.c:39 msgid "What to do when the cluster does not have quorum" msgstr "当集群没有必需票数时该如何作" #: lib/pengine/common.c:45 msgid "Whether resources can run on any node by default" msgstr "资源是否默认可以在任何节点上运行" #: lib/pengine/common.c:51 msgid "" "Whether the cluster should refrain from monitoring, starting, and stopping " "resources" msgstr "集群是否应避免监视，启动和停止资源" #: lib/pengine/common.c:58 msgid "" "Whether a start failure should prevent a resource from being recovered on " "the same node" msgstr "是否避免在同一节点上重启启动失败的资源" #: lib/pengine/common.c:60 msgid "" "When true, the cluster will immediately ban a resource from a node if it " "fails to start there. When false, the cluster will instead check the " "resource's fail count against its migration-threshold." msgstr "" "当为true，如果资源启动失败，集群将立即禁止节点启动该资源，当为false，群集将根" "据其迁移阈值来检查资源的失败计数。" #: lib/pengine/common.c:67 msgid "Whether the cluster should check for active resources during start-up" msgstr "群集是否在启动期间检查运行资源" #: lib/pengine/common.c:73 msgid "Whether to lock resources to a cleanly shut down node" msgstr "是否锁定资源到完全关闭的节点" #: lib/pengine/common.c:74 msgid "" "When true, resources active on a node when it is cleanly shut down are kept " "\"locked\" to that node (not allowed to run elsewhere) until they start " "again on that node after it rejoins (or for at most shutdown-lock-limit, if " "set). Stonith resources and Pacemaker Remote connections are never locked. " "Clone and bundle instances and the promoted role of promotable clones are " "currently never locked, though support could be added in a future release." msgstr "" "设置为true时，在完全关闭的节点上活动的资源将被“锁定”到该节点（不允许在其他地" "方运行），直到该节点重新加入后资源重新启动（或最长shutdown-lock-limit，如果已" "设置）。 Stonith资源和Pacemaker Remote连接永远不会被锁定。 克隆和捆绑实例以及" "可升级克隆的主角色目前从未锁定，尽管可以在将来的发行版中添加支持。" #: lib/pengine/common.c:85 msgid "Do not lock resources to a cleanly shut down node longer than this" msgstr "资源会被锁定到完全关闭的节点的最长时间" #: lib/pengine/common.c:86 msgid "" "If shutdown-lock is true and this is set to a nonzero time duration, " "shutdown locks will expire after this much time has passed since the " "shutdown was initiated, even if the node has not rejoined." msgstr "" "如果shutdown-lock为true，并且将此选项设置为非零持续时间，则自从开始shutdown以" "来经过了这么长的时间后，shutdown锁将过期，即使该节点尚未重新加入。" #: lib/pengine/common.c:95 msgid "" "*** Advanced Use Only *** Whether nodes may be fenced as part of recovery" msgstr "*** Advanced Use Only *** 节点是否可以被 fence 以作为集群恢复的一部分" #: lib/pengine/common.c:97 msgid "" "If false, unresponsive nodes are immediately assumed to be harmless, and " "resources that were active on them may be recovered elsewhere. This can " "result in a \"split-brain\" situation, potentially leading to data loss and/" "or service unavailability." msgstr "" "如果为false，则立即假定无响应的节点是无害的，并且可以在其他位置恢复在其上活动" "的资源。 这可能会导致 \"split-brain\" 情况，可能导致数据丢失和/或服务不可用。" #: lib/pengine/common.c:105 msgid "" "Action to send to fence device when a node needs to be fenced (\"poweroff\" " "is a deprecated alias for \"off\")" msgstr "发送到 fence 设备的操作（ \"poweroff\" 是 \"off \"的别名,不建议使用)" #: lib/pengine/common.c:112 msgid "*** Advanced Use Only *** Unused by Pacemaker" msgstr "*** Advanced Use Only *** pacemaker未使用" #: lib/pengine/common.c:113 msgid "" "This value is not used by Pacemaker, but is kept for backward compatibility, " "and certain legacy fence agents might use it." msgstr "" "Pacemaker不使用此值，但保留此值是为了向后兼容，某些传统的fence 代理可能会使用" "它。" #: lib/pengine/common.c:119 msgid "Whether watchdog integration is enabled" msgstr "是否启用watchdog集成设置" #: lib/pengine/common.c:120 msgid "" "This is set automatically by the cluster according to whether SBD is " "detected to be in use. User-configured values are ignored. The value `true` " "is meaningful if diskless SBD is used and `stonith-watchdog-timeout` is " "nonzero. In that case, if fencing is required, watchdog-based self-fencing " "will be performed via SBD without requiring a fencing resource explicitly " "configured." msgstr "" "这是由集群检测是否正在使用 SBD 并自动设置。用户配置的值将被忽略。如果使用无" "盘 SBD 并且 stonith-watchdog-timeout 不为零时，此选项为 true 才有实际意义。在" "这种情况下，无需明确配置fence资源，如果需要fence时，基于watchdog的自我fence会" "通过SBD执行。" #: lib/pengine/common.c:130 msgid "Allow performing fencing operations in parallel" msgstr "允许并行执行 fencing 操作" #: lib/pengine/common.c:136 msgid "*** Advanced Use Only *** Whether to fence unseen nodes at start-up" msgstr "*** 仅高级使用 *** 是否在启动时fence不可见节点" #: lib/pengine/common.c:137 msgid "" "Setting this to false may lead to a \"split-brain\" situation,potentially " "leading to data loss and/or service unavailability." msgstr "" "将此设置为 false 可能会导致 \"split-brain\" 的情况，可能导致数据丢失和/或服务" "不可用。" #: lib/pengine/common.c:143 msgid "" "Apply fencing delay targeting the lost nodes with the highest total resource " "priority" msgstr "针对具有最高总资源优先级的丢失节点应用fencing延迟" #: lib/pengine/common.c:144 msgid "" "Apply specified delay for the fencings that are targeting the lost nodes " "with the highest total resource priority in case we don't have the majority " "of the nodes in our cluster partition, so that the more significant nodes " "potentially win any fencing match, which is especially meaningful under " "split-brain of 2-node cluster. A promoted resource instance takes the base " "priority + 1 on calculation if the base priority is not 0. Any static/random " "delays that are introduced by `pcmk_delay_base/max` configured for the " "corresponding fencing resources will be added to this delay. This delay " "should be significantly greater than, safely twice, the maximum " "`pcmk_delay_base/max`. By default, priority fencing delay is disabled." msgstr "" "如果我们所在的集群分区并不拥有大多数集群节点，则针对丢失节点的fence操作应用指" "定的延迟，这样更重要的节点就能够赢得fence竞赛。这对于双节点集群在split-brain" "状况下尤其有意义。如果基本优先级不为0，在计算时主资源实例获得基本优先级+1。任" "何对于相应的 fence 资源由 pcmk_delay_base/max 配置所引入的静态/随机延迟会被添" "加到此延迟。为了安全, 这个延迟应该明显大于 pcmk_delay_base/max 的最大设置值，" "例如两倍。默认情况下，优先级fencing延迟已禁用。" #: lib/pengine/common.c:161 msgid "Maximum time for node-to-node communication" msgstr "最大节点间通信时间" #: lib/pengine/common.c:162 msgid "" "The node elected Designated Controller (DC) will consider an action failed " "if it does not get a response from the node executing the action within this " "time (after considering the action's own timeout). The \"correct\" value " "will depend on the speed and load of your network and cluster nodes." msgstr "" "如果一个操作未在该时间内（并且考虑操作本身的超时时长）从执行该操作的节点获得" "响应，则会被选为指定控制器（DC）的节点认定为失败。\"正确\" 值将取决于速度和您" "的网络和集群节点的负载。" +#: lib/pengine/common.c:171 +#, fuzzy +msgid "" +"Maximum number of jobs that the cluster may execute in parallel across all " +"nodes" +msgstr "集群可以在所有节点上并发执行的最大作业数" + +#: lib/pengine/common.c:173 +msgid "" +"The \"correct\" value will depend on the speed and load of your network and " +"cluster nodes. If set to 0, the cluster will impose a dynamically calculated " +"limit when any node has a high load." +msgstr "\"正确\" 值将取决于速度和您的网络与集群节点的负载。" +"如果设置为0，当任何节点具有高负载时，集群将施加一个动态计算的限制。" + +#: lib/pengine/common.c:181 +msgid "" +"The number of live migration actions that the cluster is allowed to execute " +"in parallel on a node (-1 means no limit)" +msgstr "允许集群在一个节点上并行执行的实时迁移操作的数量(-1表示没有限制)" + #: lib/pengine/common.c:189 #, fuzzy msgid "Whether the cluster should stop all active resources" msgstr "群集是否在启动期间检查运行资源" #: lib/pengine/common.c:195 msgid "Whether to stop resources that were removed from the configuration" msgstr "是否停止配置已被删除的资源" #: lib/pengine/common.c:201 msgid "Whether to cancel recurring actions removed from the configuration" msgstr "是否取消配置已被删除的的重复操作" #: lib/pengine/common.c:207 msgid "" "*** Deprecated *** Whether to remove stopped resources from the executor" msgstr "***不推荐***是否从pacemaker-execd 守护进程中清除已停止的资源" +#: lib/pengine/common.c:209 +msgid "" +"Values other than default are poorly tested and potentially dangerous. This " +"option will be removed in a future release." +msgstr "非默认值未经过充分的测试，有潜在的风险。" +"该选项将在未来的版本中删除。" + #: lib/pengine/common.c:240 #, fuzzy msgid "How cluster should react to node health attributes" msgstr "集群节点对节点健康属性如何反应" #: lib/pengine/common.c:241 msgid "" "Requires external entities to create node attributes (named with the prefix " "\"#health\") with values \"red\", \"yellow\", or \"green\"." msgstr "" "需要外部实体创建具有“red”,“yellow”或“green”值的节点属性(前缀为“#health”)" #: lib/pengine/common.c:248 msgid "Base health score assigned to a node" msgstr "分配给节点的基本健康分数" #: lib/pengine/common.c:249 msgid "Only used when \"node-health-strategy\" is set to \"progressive\"." msgstr "仅在“node-health-strategy”设置为“progressive”时使用。" #: lib/pengine/common.c:254 msgid "The score to use for a node health attribute whose value is \"green\"" msgstr "为节点健康属性值为“green”所使用的分数" #: lib/pengine/common.c:255 lib/pengine/common.c:261 lib/pengine/common.c:267 msgid "" "Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive" "\"." msgstr "仅在“node-health-strategy”设置为“custom”或“progressive”时使用。" #: lib/pengine/common.c:260 msgid "The score to use for a node health attribute whose value is \"yellow\"" msgstr "为节点健康属性值为“yellow”所使用的分数" #: lib/pengine/common.c:266 msgid "The score to use for a node health attribute whose value is \"red\"" msgstr "为节点健康属性值为“red”所使用的分数" #: lib/pengine/common.c:275 #, fuzzy msgid "How the cluster should allocate resources to nodes" msgstr "群集应该如何分配资源到节点" #: tools/crm_resource.c:258 #, c-format msgid "Aborting because no messages received in %d seconds" msgstr "中止，因为在%d秒内没有接收到消息" #: tools/crm_resource.c:909 #, c-format msgid "Invalid check level setting: %s" msgstr "无效的检查级别设置：%s" #: tools/crm_resource.c:993 #, c-format msgid "" "Resource '%s' not moved: active in %d locations (promoted in %d).\n" "To prevent '%s' from running on a specific location, specify a node.To " "prevent '%s' from being promoted at a specific location, specify a node and " "the --promoted option." msgstr "" "资源'%s'未移动：在%d个位置运行（其中在%d个位置为主实例）\n" "若要阻止'%s'在特定位置运行，请指定一个节点。若要防止'%s'在指定位置升级，指定" "一个节点并使用--promoted选项" #: tools/crm_resource.c:1004 #, c-format msgid "" "Resource '%s' not moved: active in %d locations.\n" "To prevent '%s' from running on a specific location, specify a node." msgstr "" "资源%s未移动:在%d个位置运行\n" "若要防止'%s'运行在特定位置，指定一个节点" #: tools/crm_resource.c:1079 #, c-format msgid "Could not get modified CIB: %s\n" msgstr "无法获得修改的CIB：%s\n" #: tools/crm_resource.c:1113 msgid "You need to specify a resource type with -t" msgstr "需要使用-t指定资源类型" #: tools/crm_resource.c:1156 #, c-format msgid "No agents found for standard '%s'" msgstr "没有发现指定的'%s'标准代理" #: tools/crm_resource.c:1159 #, fuzzy, c-format msgid "No agents found for standard '%s' and provider '%s'" msgstr "没有发现指定的标准%s和提供者%S的资源代理" #: tools/crm_resource.c:1226 #, c-format msgid "No %s found for %s" msgstr "没有发现%s符合%s" #: tools/crm_resource.c:1231 #, c-format msgid "No %s found" msgstr "没有发现%s" #: tools/crm_resource.c:1291 #, c-format msgid "No cluster connection to Pacemaker Remote node %s detected" msgstr "未检测到至pacemaker远程节点%s的集群连接" #: tools/crm_resource.c:1352 msgid "Must specify -t with resource type" msgstr "需要使用-t指定资源类型" #: tools/crm_resource.c:1358 msgid "Must supply -v with new value" msgstr "必须使用-v指定新值" #: tools/crm_resource.c:1390 msgid "Could not create executor connection" msgstr "无法创建到pacemaker-execd守护进程的连接" #: tools/crm_resource.c:1415 #, fuzzy, c-format msgid "Metadata query for %s failed: %s" msgstr "，查询%s的元数据失败: %s\n" #: tools/crm_resource.c:1421 #, c-format msgid "'%s' is not a valid agent specification" msgstr "'%s' 是一个无效的代理" #: tools/crm_resource.c:1434 msgid "--resource cannot be used with --class, --agent, and --provider" msgstr "--resource 不能与 --class, --agent, --provider一起使用" #: tools/crm_resource.c:1439 msgid "" "--class, --agent, and --provider can only be used with --validate and --" "force-*" msgstr "--class, --agent和--provider只能被用于--validate和--force-*" #: tools/crm_resource.c:1448 msgid "stonith does not support providers" msgstr "stonith 不支持提供者" #: tools/crm_resource.c:1452 #, c-format msgid "%s is not a known stonith agent" msgstr "%s 不是一个已知stonith代理" #: tools/crm_resource.c:1457 #, c-format msgid "%s:%s:%s is not a known resource" msgstr "%s:%s:%s 不是一个已知资源" #: tools/crm_resource.c:1571 #, c-format msgid "Error creating output format %s: %s" msgstr "创建输出格式错误 %s:%s" #: tools/crm_resource.c:1598 msgid "--expired requires --clear or -U" msgstr "--expired需要和--clear或-U一起使用" #: tools/crm_resource.c:1615 #, c-format msgid "Error parsing '%s' as a name=value pair" msgstr "'%s'解析错误，格式为name=value" #: tools/crm_resource.c:1712 msgid "Must supply a resource id with -r" msgstr "必须使用-r指定资源id" #: tools/crm_resource.c:1718 msgid "Must supply a node name with -N" msgstr "必须使用-N指定节点名称" #: tools/crm_resource.c:1742 msgid "Could not create CIB connection" msgstr "无法创建到CIB的连接" #: tools/crm_resource.c:1750 #, c-format msgid "Could not connect to the CIB: %s" msgstr "不能连接到CIB：%s" #: tools/crm_resource.c:1771 #, c-format msgid "Resource '%s' not found" msgstr "没有发现'%s'资源" #: tools/crm_resource.c:1783 #, c-format msgid "Cannot operate on clone resource instance '%s'" msgstr "不能操作克隆资源实例'%s'" #: tools/crm_resource.c:1795 #, c-format msgid "Node '%s' not found" msgstr "没有发现%s节点" #: tools/crm_resource.c:1806 tools/crm_resource.c:1815 #, c-format msgid "Error connecting to the controller: %s" msgstr "连接到控制器错误：%s" #: tools/crm_resource.c:2051 msgid "You need to supply a value with the -v option" msgstr "需要使用-v选项提供一个值" #: tools/crm_resource.c:2106 #, c-format msgid "Unimplemented command: %d" msgstr "无效的命令：%d" #: tools/crm_resource.c:2140 #, c-format msgid "Error performing operation: %s" msgstr "执行操作错误：%s" #~ msgid "" #~ "If nonzero, along with `have-watchdog=true` automatically set by the " #~ "cluster, when fencing is required, watchdog-based self-fencing will be " #~ "performed via SBD without requiring a fencing resource explicitly " #~ "configured. If `stonith-watchdog-timeout` is set to a positive value, " #~ "unseen nodes are assumed to self-fence within this much time. +WARNING:+ " #~ "It must be ensured that this value is larger than the " #~ "`SBD_WATCHDOG_TIMEOUT` environment variable on all nodes. Pacemaker " #~ "verifies the settings individually on all nodes and prevents startup or " #~ "shuts down if configured wrongly on the fly. It's strongly recommended " #~ "that `SBD_WATCHDOG_TIMEOUT` is set to the same value on all nodes. If " #~ "`stonith-watchdog-timeout` is set to a negative value, and " #~ "`SBD_WATCHDOG_TIMEOUT` is set, twice that value will be used. +WARNING:+ " #~ "In this case, it's essential (currently not verified by Pacemaker) that " #~ "`SBD_WATCHDOG_TIMEOUT` is set to the same value on all nodes." #~ msgstr "" #~ "如果值非零，且集群设置了 `have-watchdog=true` ，当需要 fence 操作时，基于 " #~ "watchdog 的自我 fence 机制将通过SBD执行，而不需要显式配置 fence 资源。如" #~ "果 `stonith-watchdog-timeout` 被设为正值，则假定不可见的节点在这段时间内自" #~ "我fence。 +WARNING:+ 必须确保该值大于所有节点上的`SBD_WATCHDOG_TIMEOUT` 环" #~ "境变量。Pacemaker将在所有节点上单独验证设置，如发现有错误的动态配置，将防" #~ "止节点启动或关闭。强烈建议在所有节点上将 `SBD_WATCHDOG_TIMEOUT` 设置为相同" #~ "的值。如果 `stonith-watchdog-timeout` 设置为负值。并且设置了 " #~ "`SBD_WATCHDOG_TIMEOUT` ，则将使用该值的两倍， +WARNING:+ 在这种情况下，必" #~ "须将所有节点上 `SBD_WATCHDOG_TIMEOUT` 设置为相同的值(目前没有通过pacemaker" #~ "验证)。"