diff --git a/heartbeat/db2 b/heartbeat/db2 index 90bfef495..491fe2408 100755 --- a/heartbeat/db2 +++ b/heartbeat/db2 @@ -1,867 +1,881 @@ #!/bin/sh # # db2 # # Resource agent that manages a DB2 LUW database in Standard role # or HADR configuration in master/slave configuration. # Multi partition is supported as well. # # Copyright (c) 2011 Holger Teutsch # # This agent incoporates code of a previous release created by # Alan Robertson and the community. # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. # ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs ####################################################################### db2_usage() { echo "db2 start|stop|monitor|promote|demote|notify|validate-all|meta-data" } db2_meta_data() { cat < 1.0 Resource Agent that manages an IBM DB2 LUW databases in Standard role as primitive or in HADR roles in master/slave configuration. Multiple partitions are supported. Standard mode: An instance including all or selected databases is made highly available. Configure each partition as a separate primitive resource. HADR mode: A single database in HADR configuration is made highly available by automating takeover operations. Configure a master / slave resource with notifications enabled and an additional monitoring operation with role "Master". In case of HADR be very deliberate in specifying intervals/timeouts. The detection of a failure including promote must complete within HADR_PEER_WINDOW. In addition to honoring requirements for crash recovery etc. for your specific database use the following relations as guidance: "monitor interval" < HADR_PEER_WINDOW - (appr 30 sec) "promote timeout" < HADR_PEER_WINDOW + (appr 20 sec) For further information and examples consult http://www.linux-ha.org/wiki/db2_(resource_agent) Resource Agent that manages an IBM DB2 LUW databases in Standard role as primitive or in HADR roles as master/slave configuration. Multiple partitions are supported. The instance of the database(s). instance List of databases to be managed, e.g "db1 db2". Defaults to all databases in the instance. Specify one db for HADR mode. List of databases to be managed DEPRECATED: The admin user of the instance. DEPRECATED: admin The number of the partion (DBPARTITIONNUM) to be managed. database partition number (DBPARTITIONNUM) END } # # validate # .. and set global variables # # exit on error # db2_validate() { local db2home db2sql db2instance # db2 uses korn shell check_binary "ksh" # check required instance vars if [ -z "$OCF_RESKEY_instance" ] then ocf_log err "DB2 required parameter instance is not set!" return $OCF_ERR_CONFIGURED fi instance=$OCF_RESKEY_instance if [ -n "$OCF_RESKEY_admin" ] then ocf_log warn "DB2 deprecated parameter admin is set, using $OCF_RESKEY_admin as instance." instance=$OCF_RESKEY_admin fi db2node=${OCF_RESKEY_dbpartitionnum:-0} db2home=$(sh -c "echo ~$instance") db2sql=$db2home/sqllib db2profile=$db2sql/db2profile db2bin=$db2sql/bin STATE_FILE=${HA_RSCTMP}/db2-${OCF_RESOURCE_INSTANCE}.state # Let's make sure a few important things are there... if ! [ -d "$db2sql" -a -d "$db2bin" -a -f "$db2profile" -a \ -x "$db2profile" -a -x "$db2bin/db2" ] then ocf_is_probe && exit $OCF_NOT_RUNNING ocf_log err "DB2 required directories and/or files not found" exit $OCF_ERR_INSTALLED fi db2instance=$(runasdb2 'echo $DB2INSTANCE') if [ "$db2instance" != "$instance" ] then ocf_is_probe && exit $OCF_NOT_RUNNING ocf_log err "DB2 parameter instance \"$instance\" != DB2INSTANCE \"$db2instance\"" exit $OCF_ERR_CONFIGURED fi # enough checking for stop to succeed [ $__OCF_ACTION = stop ] && return $OCF_SUCCESS dblist=$OCF_RESKEY_dblist if [ -n "$dblist" ] then # support , as separator as well dblist=$(echo "$dblist" | sed -e 's/[,]/ /g') else if ! dblist=$(db2_dblist) then ocf_log err "DB2 $instance($db2node): cannot retrieve db directory" exit $OCF_ERR_INSTALLED fi fi # check requirements for the HADR case if ocf_is_ms then set -- $dblist if [ $# != 1 ] then ocf_log err "DB2 resource $OCF_RESOURCE_INSTANCE must have exactly one name in dblist" exit $OCF_ERR_CONFIGURED fi if [ $db2node != 0 ] then ocf_log err "DB2 resource $OCF_RESOURCE_INSTANCE must have dbpartitionnum=0" exit $OCF_ERR_CONFIGURED fi fi return $OCF_SUCCESS } # # Run the given command as db2 instance user # runasdb2() { su $instance -c ". $db2profile; $*" } # # Run a command as the DB2 admin, and log the output # logasdb2() { local output rc output=$(runasdb2 $*) rc=$? if [ $rc -eq 0 ] then ocf_log info "$output" else ocf_log err "$output" fi return $rc } # # maintain the fal (first active log) attribute # db2_fal_attrib DB {set val|get} # db2_fal_attrib() { local db=$1 local attr val rc id node member me attr=db2hadr_${instance}_${db}_fal case "$2" in set) me=$(uname -n) # loop over all member nodes and set attribute crm_node -l | while read id node member do [ "$member" = member -a "$node" != "$me" ] || continue crm_attribute -t nodes -l reboot --node=$node -n $attr -v "$3" rc=$? ocf_log info "DB2 instance $instance($db2node/$db: setting attrib for FAL to $FIRST_ACTIVE_LOG @ $node" [ $rc != 0 ] && break done ;; get) crm_attribute -t nodes -l reboot -n $attr -G -Q 2>&1 rc=$? if [ $rc != 0 ] then ocf_log warn "DB2 instance $instance($db2node/$db: can't retrieve attribute $attr, are you sure notifications are enabled ?" fi ;; *) exit $OCF_ERR_CONFIGURED esac return $rc } # # unfortunately a first connect after a crash may need several minutes # for some internal cleanup stuff in DB2. # We run a connect in background so other connects (i.e. monitoring!) may proceed. # db2_run_connect() { local db=$1 logasdb2 "db2 connect to $db; db2 terminate" } # # get some data from the database config # sets HADR_ROLE HADR_TIMEOUT HADR_PEER_WINDOW # db2_get_cfg() { local db=$1 local output hadr_vars output=$(runasdb2 db2 get db cfg for $db) [ $? != 0 ] && return $OCF_ERR_GENERIC hadr_vars=$(echo "$output" | awk '/HADR database role/ {printf "HADR_ROLE='%s'; ", $NF;} /HADR_TIMEOUT/ {printf "HADR_TIMEOUT='%s'; ", $NF;} /First active log file/ {printf "FIRST_ACTIVE_LOG='%s'\n", $NF;} /HADR_PEER_WINDOW/ {printf "HADR_PEER_WINDOW='%s'\n", $NF;}') # sets HADR_ROLE HADR_TIMEOUT HADR_PEER_WINDOW eval $hadr_vars # HADR_PEER_WINDOW comes with V9 and is checked later if [ -z "$HADR_ROLE" -o -z "$HADR_TIMEOUT" ] then ocf_log error "DB2 cfg values invalid for $instance($db2node)/$db: $hadr_vars" return $OCF_ERR_GENERIC fi return $OCF_SUCCESS } # # return the list of databases in the instance # db2_dblist() { local output output=$(runasdb2 db2 list database directory) || return $OCF_ERR_GENERIC echo "$output" | grep -i 'Database name.*=' | sed 's%.*= *%%' } # # Delayed check of the compatibility of DB2 instance and pacemaker # config. # Logically this belongs to validate but certain parameters can only # be retrieved once the instance is started. # db2_check_config_compatibility() { local db=$1 local is_ms ocf_is_ms is_ms=$? case "$HADR_ROLE/$is_ms" in STANDARD/0) ocf_log err "DB2 database $instance/$db is not in a HADR configuration but I am a M/S resource" exit $OCF_ERR_INSTALLED ;; STANDARD/1) # OK ;; */0) if [ -z "$HADR_PEER_WINDOW" ] then ocf_log err "DB2 database $instance: release to old, need HADR_PEER_WINDOW (>=V9)" exit $OCF_ERR_INSTALLED fi ;; */1) ocf_log err "DB2 database $instance/$db is in a HADR configuration but I must be a M/S resource" esac } # # Start instance and DB. # Standard mode is through "db2 activate" in order to start in previous # mode (Standy/Primary). # If the database is a primary AND we can determine that the running master # has a higher "first active log" we conclude that we come up after a crash # an the previous Standby is now Primary. # The db is then started as Standby. # # Other cases: danger of split brain, log error and do nothing. # db2_start() { local output start_cmd db + local start_opts="dbpartitionnum $db2node" + + # If we detect that db partitions are not in use, and no + # partition is explicitly specified, activate without + # partition information. This allows db2 instances without + # partition support to be managed. + if [ -z "$OCF_RESKEY_dbpartitionnum" ] && ! [ -a "$db2sql/db2nodes.cfg" ]; then + start_opts="" + fi - if output=$(runasdb2 db2start dbpartitionnum $db2node) + if output=$(runasdb2 db2start $start_opts) then ocf_log info "DB2 instance $instance($db2node) started: $output" else case $output in *SQL1026N*) ocf_log info "DB2 instance $instance($db2node) already running: $output" ;; *) ocf_log err "$output" return $OCF_ERR_GENERIC esac fi if ! db2_instance_status then ocf_log err "DB2 instance $instance($db2node) is not active!" return $OCF_ERR_GENERIC fi [ $db2node = 0 ] || return $OCF_SUCCESS # activate DB only on node 0 for db in $dblist do # sets HADR_ROLE HADR_TIMEOUT HADR_PEER_WINDOW FIRST_ACTIVE_LOG db2_get_cfg $db || return $? # Better late than never: can only check this when the instance is already up db2_check_config_compatibility $db start_cmd="db2 activate db $db" if [ $HADR_ROLE = PRIMARY ] then local master_fal # communicate our FAL to other nodes the might start concurrently db2_fal_attrib $db set $FIRST_ACTIVE_LOG if master_fal=$(db2_fal_attrib $db get) && [ "$master_fal" '>' $FIRST_ACTIVE_LOG ] then ocf_log info "DB2 database $instance($db2node)/$db is Primary and outdated, starting as secondary" start_cmd="db2 start hadr on db $db as standby" HADR_ROLE=STANDBY fi fi if output=$(runasdb2 $start_cmd) then ocf_log info "DB2 database $instance($db2node)/$db started/activated" [ $HADR_ROLE != STANDBY ] && db2_run_connect $db & else case $output in SQL1490W*|SQL1494W*|SQL1497W*|SQL1777N*) ocf_log info "DB2 database $instance($db2node)/$db already activated: $output" ;; SQL1768N*"Reason code = \"7\""*) ocf_log err "DB2 database $instance($db2node)/$db is a Primary and the Standby is down" ocf_log err "Possible split brain ! Manual intervention required." ocf_log err "If this DB is outdated use \"db2 start hadr on db $db as standby\"" ocf_log err "If this DB is the surviving primary use \"db2 start hadr on db $db as primary by force\"" # might be the Standby is not yet there # might be a timing problem because "First active log" is delayed # on the next start attempt we might succeed when FAL was advanced # might be manual intervention is required # ... so let pacemaker give it another try and we will succeed then return $OCF_ERR_GENERIC ;; *) ocf_log err "DB2 database $instance($db2node)/$db didn't start: $output" return $OCF_ERR_GENERIC esac fi done # come here with success # Even if we are a db2 Primary pacemaker requires start to end up in slave mode echo SLAVE > $STATE_FILE return $OCF_SUCCESS } # # helper function to be spawned # so we can detect a hang of the db2stop command # db2_stop_bg() { local rc output + local stop_opts="dbpartitionnum $db2node" rc=$OCF_SUCCESS - if output=$(runasdb2 db2stop force dbpartitionnum $db2node) + if [ -z "$OCF_RESKEY_dbpartitionnum" ] && ! [ -a "$db2sql/db2nodes.cfg" ]; then + stop_opts="" + fi + + if output=$(runasdb2 db2stop force $stop_opts) then ocf_log info "DB2 instance $instance($db2node) stopped: $output" else case $output in *SQL1032N*) #SQL1032N No start database manager command was issued ocf_log info "$output" ;; *) ocf_log err "DB2 instance $instance($db2node) stop failed: $output" rc=$OCF_ERR_GENERIC esac fi return $rc } # # Stop the given db2 database instance # db2_stop() { local stop_timeout grace_timeout stop_bg_pid i must_kill # remove master score crm_master -D -l reboot # be very early here in order to avoid stale data rm -f $STATE_FILE if ! db2_instance_status then ocf_log info "DB2 instance $instance already stopped" return $OCF_SUCCESS fi stop_timeout=${OCF_RESKEY_CRM_meta_timeout:-20000} # grace_time is 4/5 (unit is ms) grace_timeout=$((stop_timeout/1250)) # start db2stop in background as this may hang db2_stop_bg & stop_bg_pid=$! # wait for grace_timeout i=0 while [ $i -lt $grace_timeout ] do kill -0 $stop_bg_pid 2>/dev/null || break; sleep 1 i=$((i+1)) done # collect exit status but don't hang if kill -0 $stop_bg_pid 2>/dev/null then stoprc=1 kill -9 $stop_bg_pid 2>/dev/null else wait $stop_bg_pid stoprc=$? fi must_kill=0 if [ $stoprc -ne 0 ] then ocf_log warn "DB2 instance $instance($db2node): db2stop failed, using db2nkill" must_kill=1 elif ! db2_instance_dead then ocf_log warn "DB2 instance $instance($db2node): db2stop indicated success but there a still processes, using db2nkill" must_kill=1 fi if [ $must_kill -eq 1 ] then # db2nkill kills *all* partions on the node if [ -x $db2bin/db2nkill ] then logasdb2 $db2bin/db2nkill $db2node elif [ -x $db2bin/db2_kill ] then logasdb2 $db2bin/db2_kill fi # loop forever (or lrmd kills us due to timeout) until the # instance is dead while ! db2_instance_dead do ocf_log info "DB2 instance $instance($db2node): waiting for processes to exit" sleep 1 done ocf_log info "DB2 instance $instance($db2node) is now dead" fi return $OCF_SUCCESS } # # check whether `enough´ processes for a healthy instance are up # db2_instance_status() { local pscount pscount=$(runasdb2 $db2bin/db2nps $db2node | cut -c9- | grep ' db2[^ ]' | wc -l) test $pscount -ge 4 } # # is the given db2 instance dead? # db2_instance_dead() { local pscount pscount=$(runasdb2 $db2bin/db2nps $db2node | cut -c9- | grep ' db2[^ ]' | wc -l) test $pscount -eq 0 } # # return the status of the db as "Role/Status" # e.g. Primary/Peer, Standby/RemoteCatchupPending # # If not in HADR configuration return "Standard/Standalone" # db2_hadr_status() { local db=$1 local output output=$(runasdb2 db2pd -hadr -db $db) if [ $? != 0 ] then echo "Down/Off" return 1 fi echo "$output" | awk '/^HADR is not active/ {print "Standard/Standalone"; exit; } /^Role *State */ {getline; printf "%s/%s\n", $1, $2; exit; }' } # # Monitor the db # And as side effect set crm_master / FAL attribute # db2_monitor() { local CMD output hadr db if ! db2_instance_status then # instance is dead remove master score crm_master -D -l reboot exit $OCF_NOT_RUNNING fi [ $db2node = 0 ] || return 0 # monitoring only for partition 0 for db in $dblist do hadr=$(db2_hadr_status $db) || return $OCF_ERR_GENERIC ocf_log debug "Monitor: DB2 database $instance($db2node)/$db has HADR status $hadr" # set master preference accordingly case "$hadr" in Primary/*|Standard/*) # perform a basic health check CMD="if db2 connect to $db; then db2 select \* from sysibm.sysversions ; rc=\$?; db2 terminate; else rc=\$?; fi; exit \$rc" if ! output=$(runasdb2 $CMD) then case "$output" in SQL1776N*) # can't connect/select on standby, may be spurious turing takeover ;; *) ocf_log err "DB2 database $instance($db2node)/$db is not working" ocf_log err "DB2 message: $output" # dead primary, remove master score crm_master -D -l reboot return $OCF_ERR_GENERIC esac fi ocf_log debug "DB2 database $instance($db2node)/$db appears to be working" ocf_is_ms && crm_master -v 10000 -l reboot ;; Standby/*Peer) crm_master -v 8000 -l reboot ;; Standby/*) ocf_log warn "DB2 database $instance($db2node)/$db in status $hadr can never be promoted" crm_master -D -l reboot ;; *) return $OCF_ERR_GENERIC esac done # everything OK, return if running as slave grep MASTER $STATE_FILE >/dev/null 2>&1 || return $OCF_SUCCESS return $OCF_RUNNING_MASTER } # # Promote db to Primary # db2_promote() { # validate ensured that dblist contains only one entry local db=$dblist local i hadr output force # we run this twice as after a crash of the other node # within HADR_TIMEOUT the status may be still reported as Peer # although a connection no longer exists for i in 1 2 do hadr=$(db2_hadr_status $db) || return $OCF_ERR_GENERIC ocf_log info "DB2 database $instance($db2node)/$db has HADR status $hadr and will be promoted" case "$hadr" in Standard/Standalone) # this case only to keep ocf-tester happy return $OCF_SUCCESS ;; Primary/Peer) # nothing to do, only update pacemaker's view echo MASTER > $STATE_FILE return $OCF_SUCCESS ;; Standby/Peer) # must take over ;; Standby/DisconnectedPeer) # must take over forced force="by force peer window only" ;; *) return $OCF_ERR_GENERIC esac if output=$(runasdb2 db2 takeover hadr on db $db $force) then # update pacemaker's view echo MASTER > $STATE_FILE # turn the log so we rapidly get a new FAL logasdb2 "db2 archive log for db $db" return $OCF_SUCCESS fi case "$output" in SQL1770N*"Reason code = \"7\""*) # expected, HADR_TIMEOUT is now expired # go for the second try continue ;; *) ocf_log err "DB2 database $instance($db2node)/$db promote failed: $output" return $OCF_ERR_GENERIC esac done return $OCF_ERR_GENERIC } # # Demote db to standby # db2_demote() { # validate ensured that dblist contains only one entry local db=$dblist local hadr # house keeping, set pacemaker's view to slave echo SLAVE > $STATE_FILE hadr=$(db2_hadr_status $dblist) || return $OCF_ERR_GENERIC ocf_log info "DB2 database $instance($db2node)/$db has HADR status $hadr and will be demoted" db2_monitor return $? } # # handle pre start notification # We record our first active log on the other nodes. # If two primaries come up after a crash they can safely determine who is # the outdated one. # db2_notify() { local node # only interested in pre-start [ $OCF_RESKEY_CRM_meta_notify_type = pre \ -a $OCF_RESKEY_CRM_meta_notify_operation = start ] || return $OCF_SUCESS # gets FIRST_ACTIVE_LOG db2_get_cfg $dblist || return $? db2_fal_attrib $dblist set $FIRST_ACTIVE_LOG || return $OCF_ERR_GENERIC exit $OCF_SUCCESS } ######## # Main # ######## case "$__OCF_ACTION" in meta-data) db2_meta_data exit $OCF_SUCCESS ;; usage) db2_usage exit $OCF_SUCCESS ;; start) db2_validate db2_start || exit $? db2_monitor exit $? ;; stop) db2_validate db2_stop exit $? ;; promote) db2_validate db2_promote exit $? ;; demote) db2_validate db2_demote exit $? ;; notify) db2_validate db2_notify exit $? ;; monitor) db2_validate db2_monitor exit $? ;; validate-all) db2_validate exit $? ;; *) db2_usage exit $OCF_ERR_UNIMPLEMENTED esac