diff --git a/heartbeat/iSCSILogicalUnit b/heartbeat/iSCSILogicalUnit index 27e9edcc0..c4cee0dfb 100755 --- a/heartbeat/iSCSILogicalUnit +++ b/heartbeat/iSCSILogicalUnit @@ -1,660 +1,663 @@ #!/bin/bash # # # iSCSILogicalUnit OCF RA. Exports and manages iSCSI Logical Units. # # (c) 2013 LINBIT, Lars Ellenberg # (c) 2009-2010 Florian Haas, Dejan Muhamedagic, # and Linux-HA contributors # # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs # Defaults # Set a default implementation based on software installed if have_binary ietadm; then OCF_RESKEY_implementation_default="iet" elif have_binary tgtadm; then OCF_RESKEY_implementation_default="tgt" elif have_binary lio_node; then OCF_RESKEY_implementation_default="lio" elif have_binary targetcli; then OCF_RESKEY_implementation_default="lio-t" fi : ${OCF_RESKEY_implementation=${OCF_RESKEY_implementation_default}} # Use a default SCSI ID and SCSI SN that is unique across the cluster, # and persistent in the event of resource migration. # SCSI IDs are limited to 24 bytes, but only 16 bytes are known to be # supported by all iSCSI implementations this RA cares about. Thus, # for a default, use the first 16 characters of # $OCF_RESOURCE_INSTANCE. OCF_RESKEY_scsi_id_default="${OCF_RESOURCE_INSTANCE:0:16}" : ${OCF_RESKEY_scsi_id=${OCF_RESKEY_scsi_id_default}} # To have a reasonably unique default SCSI SN, use the first 8 bytes # of an MD5 hash of of $OCF_RESOURCE_INSTANCE sn=`echo -n "${OCF_RESOURCE_INSTANCE}" | openssl md5 | sed -e 's/(stdin)= //'` OCF_RESKEY_scsi_sn_default=${sn:0:8} : ${OCF_RESKEY_scsi_sn=${OCF_RESKEY_scsi_sn_default}} # set 0 as a default value for lio iblock device number OCF_RESKEY_lio_iblock_default=0 OCF_RESKEY_lio_iblock=${OCF_RESKEY_lio_iblock:-$OCF_RESKEY_lio_iblock_default} ## tgt specifics # tgt has "backing store type" and "backing store open flags", # as well as device-type. # # suggestions how to make this generic accross all supported implementations? # how should they be named, how should they be mapped to implementation specifics? # # OCF_RESKEY_tgt_bstype # OCF_RESKEY_tgt_bsoflags # OCF_RESKEY_tgt_device_type ####################################################################### meta_data() { cat < 0.9 Manages iSCSI Logical Unit. An iSCSI Logical unit is a subdivision of an SCSI Target, exported via a daemon that speaks the iSCSI protocol. Manages iSCSI Logical Units (LUs) The iSCSI target daemon implementation. Must be one of "iet", "tgt", "lio", or "lio-t". If unspecified, an implementation is selected based on the availability of management utilities, with "iet" being tried first, then "tgt", then "lio", then "lio-t". iSCSI target daemon implementation The iSCSI Qualified Name (IQN) that this Logical Unit belongs to. iSCSI target IQN The Logical Unit number (LUN) exposed to initiators. Logical Unit number (LUN) The path to the block device exposed. Some implementations allow this to be a regular file, too. Block device (or file) path The SCSI ID to be configured for this Logical Unit. The default is the resource name, truncated to 24 bytes. SCSI ID The SCSI serial number to be configured for this Logical Unit. The default is a hash of the resource name, truncated to 8 bytes. SCSI serial number The SCSI vendor ID to be configured for this Logical Unit. SCSI vendor ID The SCSI product ID to be configured for this Logical Unit. SCSI product ID TGT specific backing store type. If you want to use aio, make sure your tgtadm is built against libaio. See tgtadm(8). TGT backing store type TGT specific backing store open flags (direct|sync). See tgtadm(8). TGT backing store open flags TGT specific device type. See tgtadm(8). TGT device type Additional LU parameters. A space-separated list of "name=value" pairs which will be passed through to the iSCSI daemon's management interface. The supported parameters are implementation dependent. Neither the name nor the value may contain whitespace. List of iSCSI LU parameters Allowed initiators. A space-separated list of initiators allowed to connect to this lun. Initiators may be listed in any syntax the target implementation allows. If this parameter is empty or not set, access to this lun will not be allowed from any initiator, if target is not in demo mode. This parameter is only necessary when using LIO. List of iSCSI initiators allowed to connect to this lun. LIO iblock device name, a number starting from 0. Using distinct values here avoids a warning in LIO "LEGACY: SHARED HBA"; and it is necessary when using multiple LUNs started at the same time (eg. on node failover) to prevent a race condition in tcm_core on mkdir() in /sys/kernel/config/target/core/. LIO iblock device number END } ####################################################################### iSCSILogicalUnit_usage() { cat < /sys/kernel/config/target/core/iblock_${OCF_RESKEY_lio_iblock}/${OCF_RESOURCE_INSTANCE}/wwn/vpd_unit_serial fi ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/luns create /backstores/block/${OCF_RESOURCE_INSTANCE} ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then for initiator in ${OCF_RESKEY_allowed_initiators}; do ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/acls create ${initiator} add_mapped_luns=False || exit $OCF_ERR_GENERIC ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/acls/${initiator} create ${OCF_RESKEY_lun} ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC done fi ;; esac - return $OCF_SUCCESS + # Force the monitor operation to pass before start is considered a success. + iSCSILogicalUnit_monitor } iSCSILogicalUnit_stop() { iSCSILogicalUnit_monitor - if [ $? = $OCF_SUCCESS ]; then - case $OCF_RESKEY_implementation in - iet) - # IET allows us to remove LUs while they are in use - ocf_run ietadm --op delete \ - --tid=${TID} \ - --lun=${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC - ;; - tgt) - # tgt will fail to remove an LU while it is in use, - # but at the same time does not allow us to - # selectively shut down a connection that is using a - # specific LU. Thus, we need to loop here until tgtd - # decides that the LU is no longer in use, or we get - # timed out by the LRM. - while ! ocf_run -warn tgtadm --lld iscsi --op delete --mode logicalunit \ - --tid ${TID} \ - --lun=${OCF_RESKEY_lun}; do - sleep 1 - done - ;; - lio) + if [ $? -eq $OCF_NOT_RUNNING ]; then + return $OCF_SUCCESS + fi + + case $OCF_RESKEY_implementation in + iet) + # IET allows us to remove LUs while they are in use + ocf_run ietadm --op delete \ + --tid=${TID} \ + --lun=${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC + ;; + tgt) + # tgt will fail to remove an LU while it is in use, + # but at the same time does not allow us to + # selectively shut down a connection that is using a + # specific LU. Thus, we need to loop here until tgtd + # decides that the LU is no longer in use, or we get + # timed out by the LRM. + while ! ocf_run -warn tgtadm --lld iscsi --op delete --mode logicalunit \ + --tid ${TID} \ + --lun=${OCF_RESKEY_lun}; do + sleep 1 + done + ;; + lio) - acls_configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_target_iqn}/tpgt_1/acls" - for initiatorpath in ${acls_configfs_path}/*; do - initiator=$(basename "${initiatorpath}") - if [ -e "${initiatorpath}/lun_${OCF_RESKEY_lun}" ]; then - ocf_log info "deleting acl at ${initiatorpath}/lun_${OCF_RESKEY_lun}" - ocf_run lio_node --dellunacl=${OCF_RESKEY_target_iqn} 1 \ - ${initiator} ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC + acls_configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_target_iqn}/tpgt_1/acls" + for initiatorpath in ${acls_configfs_path}/*; do + initiator=$(basename "${initiatorpath}") + if [ -e "${initiatorpath}/lun_${OCF_RESKEY_lun}" ]; then + ocf_log info "deleting acl at ${initiatorpath}/lun_${OCF_RESKEY_lun}" + ocf_run lio_node --dellunacl=${OCF_RESKEY_target_iqn} 1 \ + ${initiator} ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC + fi + done + lun_configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_target_iqn}/tpgt_1/lun/lun_#{${OCF_RESKEY_lun}/" + if [ -e "${lun_configfs_path}" ]; then + ocf_run lio_node --dellun=${OCF_RESKEY_target_iqn} 1 ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC + fi + block_configfs_path="/sys/kernel/config/target/core/iblock_${OCF_RESKEY_lio_iblock}/${OCF_RESKEY_INSTANCE}/udev_path" + if [ -e "${block_configfs_path}" ]; then + ocf_run tcm_node --freedev=iblock_${OCF_RESKEY_lio_iblock}/${OCF_RESOURCE_INSTANCE} || exit $OCF_ERR_GENERIC + fi + ;; + lio-t) + ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/luns delete ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC + if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then + for initiator in ${OCF_RESKEY_allowed_initiators}; do + if targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/acls/${initiator} status | grep "Mapped LUNs: 0" >/dev/null ; then + ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/acls/ delete ${initiator} fi done - lun_configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_target_iqn}/tpgt_1/lun/lun_#{${OCF_RESKEY_lun}/" - if [ -e "${lun_configfs_path}" ]; then - ocf_run lio_node --dellun=${OCF_RESKEY_target_iqn} 1 ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC - fi - block_configfs_path="/sys/kernel/config/target/core/iblock_${OCF_RESKEY_lio_iblock}/${OCF_RESKEY_INSTANCE}/udev_path" - if [ -e "${block_configfs_path}" ]; then - ocf_run tcm_node --freedev=iblock_${OCF_RESKEY_lio_iblock}/${OCF_RESOURCE_INSTANCE} || exit $OCF_ERR_GENERIC - fi - ;; - lio-t) - ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/luns delete ${OCF_RESKEY_lun} || exit $OCF_ERR_GENERIC - if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then - for initiator in ${OCF_RESKEY_allowed_initiators}; do - if targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/acls/${initiator} status | grep "Mapped LUNs: 0" >/dev/null ; then - ocf_run targetcli /iscsi/${OCF_RESKEY_target_iqn}/tpg1/acls/ delete ${initiator} - fi - done - fi + fi + + ocf_run targetcli /backstores/block delete ${OCF_RESOURCE_INSTANCE} || exit $OCF_ERR_GENERIC + ;; + esac - ocf_run targetcli /backstores/block delete ${OCF_RESOURCE_INSTANCE} || exit $OCF_ERR_GENERIC - ;; - esac - fi - return $OCF_SUCCESS } iSCSILogicalUnit_monitor() { case $OCF_RESKEY_implementation in iet) # Figure out and set the target ID TID=`sed -ne "s/tid:\([[:digit:]]\+\) name:${OCF_RESKEY_target_iqn}$/\1/p" < /proc/net/iet/volume` if [ -z "${TID}" ]; then # Our target is not configured, thus we're not # running. return $OCF_NOT_RUNNING fi # FIXME: this looks for a matching LUN and path, but does # not actually test for the correct target ID. grep -E -q "[[:space:]]+lun:${OCF_RESKEY_lun}.*path:${OCF_RESKEY_path}$" /proc/net/iet/volume && return $OCF_SUCCESS ;; tgt) # Figure out and set the target ID TID=`tgtadm --lld iscsi --op show --mode target \ | sed -ne "s/^Target \([[:digit:]]\+\): ${OCF_RESKEY_target_iqn}$/\1/p"` if [ -z "$TID" ]; then # Our target is not configured, thus we're not # running. return $OCF_NOT_RUNNING fi # This only looks for the backing store, but does not test # for the correct target ID and LUN. tgtadm --lld iscsi --op show --mode target \ | grep -E -q "[[:space:]]+Backing store.*: ${OCF_RESKEY_path}$" && return $OCF_SUCCESS ;; lio) configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_target_iqn}/tpgt_1/lun/lun_${OCF_RESKEY_lun}/${OCF_RESOURCE_INSTANCE}/udev_path" [ -e ${configfs_path} ] && [ `cat ${configfs_path}` = "${OCF_RESKEY_path}" ] && return $OCF_SUCCESS # if we aren't activated, is a block device still left over? block_configfs_path="/sys/kernel/config/target/core/iblock_${OCF_RESKEY_lio_iblock}/${OCF_RESKEY_INSTANCE}/udev_path" [ -e ${block_configfs_path} ] && ocf_log warn "existing block without an active lun: ${block_configfs_path}" [ -e ${block_configfs_path} ] && return $OCF_ERR_GENERIC ;; lio-t) configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_target_iqn}/tpgt_1/lun/lun_${OCF_RESKEY_lun}/*/udev_path" [ -e ${configfs_path} ] && [ `cat ${configfs_path}` = "${OCF_RESKEY_path}" ] && return $OCF_SUCCESS ;; esac return $OCF_NOT_RUNNING } iSCSILogicalUnit_validate() { # Do we have all required variables? for var in target_iqn lun path; do param="OCF_RESKEY_${var}" if [ -z "${!param}" ]; then - ocf_log error "Missing resource parameter \"$var\"!" + ocf_exit_reason "Missing resource parameter \"$var\"!" exit $OCF_ERR_CONFIGURED fi done # Is the configured implementation supported? case "$OCF_RESKEY_implementation" in "iet"|"tgt"|"lio"|"lio-t") ;; "") # The user didn't specify an implementation, and we were # unable to determine one from installed binaries (in # other words: no binaries for any supported # implementation could be found) - ocf_log error "Undefined iSCSI target implementation" + ocf_exit_reason "Undefined iSCSI target implementation" exit $OCF_ERR_INSTALLED ;; *) - ocf_log error "Unsupported iSCSI target implementation \"$OCF_RESKEY_implementation\"!" + ocf_exit_reason "Unsupported iSCSI target implementation \"$OCF_RESKEY_implementation\"!" exit $OCF_ERR_CONFIGURED ;; esac # Do we have a valid LUN? case $OCF_RESKEY_implementation in iet) # IET allows LUN 0 and up [ $OCF_RESKEY_lun -ge 0 ] case $? in 0) # OK ;; 1) ocf_log err "Invalid LUN $OCF_RESKEY_lun (must be a non-negative integer)." exit $OCF_ERR_CONFIGURED ;; *) ocf_log err "Invalid LUN $OCF_RESKEY_lun (must be an integer)." exit $OCF_ERR_CONFIGURED ;; esac ;; tgt) # tgt reserves LUN 0 for its own purposes [ $OCF_RESKEY_lun -ge 1 ] case $? in 0) # OK ;; 1) ocf_log err "Invalid LUN $OCF_RESKEY_lun (must be greater than 0)." exit $OCF_ERR_CONFIGURED ;; *) ocf_log err "Invalid LUN $OCF_RESKEY_lun (must be an integer)." exit $OCF_ERR_CONFIGURED ;; esac ;; esac # Do we have any configuration parameters that the current # implementation does not support? local unsupported_params local var local envar case $OCF_RESKEY_implementation in iet) # IET does not support setting the vendor and product ID # (it always uses "IET" and "VIRTUAL-DISK") unsupported_params="vendor_id product_id allowed_initiators lio_iblock tgt_bstype tgt_bsoflags tgt_device_type" ;; tgt) unsupported_params="allowed_initiators lio_iblock" ;; lio) unsupported_params="scsi_id vendor_id product_id tgt_bstype tgt_bsoflags tgt_device_type" ;; lio-t) unsupported_params="scsi_id vendor_id product_id tgt_bstype tgt_bsoflags tgt_device_type lio_iblock" ;; esac for var in ${unsupported_params}; do envar=OCF_RESKEY_${var} defvar=OCF_RESKEY_${var}_default if [ -n "${!envar}" ]; then if [[ "${!envar}" != "${!defvar}" ]];then case "$__OCF_ACTION" in start|validate-all) ocf_log warn "Configuration parameter \"${var}\"" \ "is not supported by the iSCSI implementation" \ "and will be ignored." ;; esac fi fi done if ! ocf_is_probe; then # Do we have all required binaries? case $OCF_RESKEY_implementation in iet) check_binary ietadm ;; tgt) check_binary tgtadm ;; lio) check_binary tcm_node check_binary lio_node ;; lio-t) check_binary targetcli ;; esac # Is the required kernel functionality available? case $OCF_RESKEY_implementation in iet) [ -d /proc/net/iet ] if [ $? -ne 0 ]; then ocf_log err "/proc/net/iet does not exist or is not a directory -- check if required modules are loaded." exit $OCF_ERR_INSTALLED fi ;; tgt) # tgt is userland only ;; esac fi return $OCF_SUCCESS } case $1 in meta-data) meta_data exit $OCF_SUCCESS ;; usage|help) iSCSILogicalUnit_usage exit $OCF_SUCCESS ;; esac # Everything except usage and meta-data must pass the validate test iSCSILogicalUnit_validate case $__OCF_ACTION in start) iSCSILogicalUnit_start;; stop) iSCSILogicalUnit_stop;; monitor|status) iSCSILogicalUnit_monitor;; reload) ocf_log err "Reloading..." iSCSILogicalUnit_start ;; validate-all) ;; *) iSCSILogicalUnit_usage exit $OCF_ERR_UNIMPLEMENTED ;; esac rc=$? ocf_log debug "${OCF_RESOURCE_INSTANCE} $__OCF_ACTION : $rc" exit $rc diff --git a/heartbeat/iSCSITarget b/heartbeat/iSCSITarget index 25d4766fd..72ec64ab7 100755 --- a/heartbeat/iSCSITarget +++ b/heartbeat/iSCSITarget @@ -1,647 +1,660 @@ #!/bin/bash # # -# iSCSITarget OCF RA. Exports and manages iSCSI targets. +# iSCSITarget OCF RA. Exports and manages iSCSI targets. # # (c) 2009-2010 Florian Haas, Dejan Muhamedagic, # and Linux-HA contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs # Defaults # Set a default implementation based on software installed if have_binary ietadm; then - OCF_RESKEY_implementation_default="iet" + OCF_RESKEY_implementation_default="iet" elif have_binary tgtadm; then - OCF_RESKEY_implementation_default="tgt" + OCF_RESKEY_implementation_default="tgt" elif have_binary lio_node; then - OCF_RESKEY_implementation_default="lio" + OCF_RESKEY_implementation_default="lio" elif have_binary targetcli; then - OCF_RESKEY_implementation_default="lio-t" + OCF_RESKEY_implementation_default="lio-t" fi : ${OCF_RESKEY_implementation=${OCF_RESKEY_implementation_default}} # Listen on 0.0.0.0:3260 by default OCF_RESKEY_portals_default="0.0.0.0:3260" : ${OCF_RESKEY_portals=${OCF_RESKEY_portals_default}} # Lockfile, used for selecting a target ID LOCKFILE=${HA_RSCTMP}/iSCSITarget-${OCF_RESKEY_implementation}.lock ####################################################################### meta_data() { cat < 0.9 Manages iSCSI targets. An iSCSI target is a collection of SCSI Logical Units (LUs) exported via a daemon that speaks the iSCSI protocol. iSCSI target export agent The iSCSI target daemon implementation. Must be one of "iet", "tgt", "lio", or "lio-t". If unspecified, an implementation is selected based on the availability of management utilities, with "iet" being tried first, then "tgt", then "lio", then "lio-t". Specifies the iSCSI target implementation ("iet", "tgt", "lio", or "lio-t"). The target iSCSI Qualified Name (IQN). Should follow the conventional "iqn.yyyy-mm.<reversed domain name>[:identifier]" syntax. iSCSI target IQN The iSCSI target ID. Required for tgt. iSCSI target ID iSCSI network portal addresses. Not supported by all implementations. If unset, the default is to create one portal that listens on ${OCF_RESKEY_portal_default}. iSCSI portal addresses Allowed initiators. A space-separated list of initiators allowed to connect to this target. Initiators may be listed in any syntax the target implementation allows. If this parameter is empty or not set, access to this target will be allowed from any initiator. List of iSCSI initiators allowed to connect to this target A username used for incoming initiator authentication. If unspecified, allowed initiators will be able to log in without authentication. This is a unique parameter, as it not allowed to re-use a single username across multiple target instances. Incoming account username A password used for incoming initiator authentication. Incoming account password Additional target parameters. A space-separated list of "name=value" pairs which will be passed through to the iSCSI daemon's management interface. The supported parameters are implementation dependent. Neither the name nor the value may contain whitespace. List of iSCSI target parameters - - - - - + + + + + END } ####################################################################### iSCSITarget_usage() { cat <> /etc/initiators.deny - echo "${OCF_RESKEY_iqn} ${OCF_RESKEY_allowed_initiators// /,}" >> /etc/initiators.allow - else - echo "${OCF_RESKEY_iqn} ALL" >> /etc/initiators.allow - fi - # In iet, adding a new user and assigning it to a target - # is one operation. - if [ -n "${OCF_RESKEY_incoming_username}" ]; then - ocf_run ietadm --op new --user \ - --tid=${tid} \ - --params=IncomingUser=${OCF_RESKEY_incoming_username},Password=${OCF_RESKEY_incoming_password} \ - || exit $OCF_ERR_GENERIC - fi - ;; + local lasttid + local tid + if [ "${OCF_RESKEY_tid}" ]; then + tid="${OCF_RESKEY_tid}" + else + # Figure out the last used target ID, add 1 to get the new + # target ID. + ocf_take_lock $LOCKFILE + ocf_release_lock_on_exit $LOCKFILE + lasttid=`sed -ne "s/tid:\([[:digit:]]\+\) name:.*/\1/p" < /proc/net/iet/volume | sort -n | tail -n1` + [ -z "${lasttid}" ] && lasttid=0 + tid=$((++lasttid)) + fi + + # Create the target. + ocf_run ietadm --op new \ + --tid=${tid} \ + --params Name=${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC + + # Set additional parameters. + for param in ${OCF_RESKEY_additional_parameters}; do + name=${param%=*} + value=${param#*=} + ocf_run ietadm --op update \ + --tid=${tid} \ + --params ${name}=${value} || exit $OCF_ERR_GENERIC + done + + # Legacy versions of IET allow targets by default, current + # versions deny. To be safe we manage both the .allow and + # .deny files. + if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then + echo "${OCF_RESKEY_iqn} ALL" >> /etc/initiators.deny + echo "${OCF_RESKEY_iqn} ${OCF_RESKEY_allowed_initiators// /,}" >> /etc/initiators.allow + else + echo "${OCF_RESKEY_iqn} ALL" >> /etc/initiators.allow + fi + # In iet, adding a new user and assigning it to a target + # is one operation. + if [ -n "${OCF_RESKEY_incoming_username}" ]; then + ocf_run ietadm --op new --user \ + --tid=${tid} \ + --params=IncomingUser=${OCF_RESKEY_incoming_username},Password=${OCF_RESKEY_incoming_password} \ + || exit $OCF_ERR_GENERIC + fi + ;; tgt) - local tid - tid="${OCF_RESKEY_tid}" - # Create the target. - ocf_run tgtadm --lld iscsi --op new --mode target \ - --tid=${tid} \ - --targetname ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC - # Set parameters. - for param in ${OCF_RESKEY_additional_parameters}; do - name=${param%=*} - value=${param#*=} - ocf_run tgtadm --lld iscsi --op update --mode target \ - --tid=${tid} \ - --name=${name} --value=${value} || exit $OCF_ERR_GENERIC - done - # For tgt, we always have to add access per initiator; - # access to targets is denied by default. If - # "allowed_initiators" is unset, we must use the special - # keyword ALL. - for initiator in ${OCF_RESKEY_allowed_initiators=ALL}; do - ocf_run tgtadm --lld iscsi --op bind --mode target \ - --tid=${tid} \ - --initiator-address=${initiator} || exit $OCF_ERR_GENERIC - done - # In tgt, we must first create a user account, then assign - # it to a target using the "bind" operation. - if [ -n "${OCF_RESKEY_incoming_username}" ]; then - ocf_run tgtadm --lld iscsi --mode account --op new \ - --user=${OCF_RESKEY_incoming_username} \ - --password=${OCF_RESKEY_incoming_password} || exit $OCF_ERR_GENERIC - ocf_run tgtadm --lld iscsi --mode account --op bind \ - --tid=${tid} \ - --user=${OCF_RESKEY_incoming_username} || exit $OCF_ERR_GENERIC - fi - ;; + local tid + tid="${OCF_RESKEY_tid}" + # Create the target. + ocf_run tgtadm --lld iscsi --op new --mode target \ + --tid=${tid} \ + --targetname ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC + + # Set parameters. + for param in ${OCF_RESKEY_additional_parameters}; do + name=${param%=*} + value=${param#*=} + ocf_run tgtadm --lld iscsi --op update --mode target \ + --tid=${tid} \ + --name=${name} --value=${value} || exit $OCF_ERR_GENERIC + done + + # For tgt, we always have to add access per initiator; + # access to targets is denied by default. If + # "allowed_initiators" is unset, we must use the special + # keyword ALL. + for initiator in ${OCF_RESKEY_allowed_initiators=ALL}; do + ocf_run tgtadm --lld iscsi --op bind --mode target \ + --tid=${tid} \ + --initiator-address=${initiator} || exit $OCF_ERR_GENERIC + done + + # In tgt, we must first create a user account, then assign + # it to a target using the "bind" operation. + if [ -n "${OCF_RESKEY_incoming_username}" ]; then + ocf_run tgtadm --lld iscsi --mode account --op new \ + --user=${OCF_RESKEY_incoming_username} \ + --password=${OCF_RESKEY_incoming_password} || exit $OCF_ERR_GENERIC + ocf_run tgtadm --lld iscsi --mode account --op bind \ + --tid=${tid} \ + --user=${OCF_RESKEY_incoming_username} || exit $OCF_ERR_GENERIC + fi + ;; lio) - # lio distinguishes between targets and target portal - # groups (TPGs). We will always create one TPG, with the - # number 1. In lio, creating a network portal - # automatically creates the corresponding target if it - # doesn't already exist. - for portal in ${OCF_RESKEY_portals}; do - ocf_run lio_node --addnp ${OCF_RESKEY_iqn} 1 \ - ${portal} || exit $OCF_ERR_GENERIC - done - # in lio, we can set target parameters by manipulating - # the appropriate configfs entries - for param in ${OCF_RESKEY_additional_parameters}; do - name=${param%=*} - value=${param#*=} - configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/param/${name}" - if [ -e ${configfs_path} ]; then - echo ${value} > ${configfs_path} || exit $OCF_ERR_GENERIC + # lio distinguishes between targets and target portal + # groups (TPGs). We will always create one TPG, with the + # number 1. In lio, creating a network portal + # automatically creates the corresponding target if it + # doesn't already exist. + for portal in ${OCF_RESKEY_portals}; do + ocf_run lio_node --addnp ${OCF_RESKEY_iqn} 1 \ + ${portal} || exit $OCF_ERR_GENERIC + done + + # in lio, we can set target parameters by manipulating + # the appropriate configfs entries + for param in ${OCF_RESKEY_additional_parameters}; do + name=${param%=*} + value=${param#*=} + configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/param/${name}" + if [ -e ${configfs_path} ]; then + echo ${value} > ${configfs_path} || exit $OCF_ERR_GENERIC + else + ocf_log warn "Unsupported iSCSI target parameter ${name}: will be ignored." + fi + done + + # lio does per-initiator filtering by default. To disable + # this, we need to switch the target to "permissive mode". + if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then + for initiator in ${OCF_RESKEY_allowed_initiators}; do + ocf_run lio_node --addnodeacl ${OCF_RESKEY_iqn} 1 \ + ${initiator} || exit $OCF_ERR_GENERIC + done else - ocf_log warn "Unsupported iSCSI target parameter ${name}: will be ignored." + ocf_run lio_node --permissive ${OCF_RESKEY_iqn} 1 || exit $OCF_ERR_GENERIC + # permissive mode enables read-only access by default, + # so we need to change that to RW to be in line with + # the other implementations. + echo 0 > "/sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/attrib/demo_mode_write_protect" + if [ `cat /sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/attrib/demo_mode_write_protect` -ne 0 ]; then + ocf_log err "Failed to disable write protection for target ${OCF_RESKEY_iqn}." + exit $OCF_ERR_GENERIC + fi fi - done - # lio does per-initiator filtering by default. To disable - # this, we need to switch the target to "permissive mode". - if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then - for initiator in ${OCF_RESKEY_allowed_initiators}; do - ocf_run lio_node --addnodeacl ${OCF_RESKEY_iqn} 1 \ - ${initiator} || exit $OCF_ERR_GENERIC + + # TODO: add CHAP authentication support when it gets added + # back into LIO + ocf_run lio_node --disableauth ${OCF_RESKEY_iqn} 1 || exit $OCF_ERR_GENERIC + # Finally, we need to enable the target to allow + # initiators to connect + ocf_run lio_node --enabletpg=${OCF_RESKEY_iqn} 1 || exit $OCF_ERR_GENERIC + ;; + lio-t) + # lio distinguishes between targets and target portal + # groups (TPGs). We will always create one TPG, with the + # number 1. In lio, creating a network portal + # automatically creates the corresponding target if it + # doesn't already exist. + for portal in ${OCF_RESKEY_portals}; do + ocf_run targetcli /iscsi create ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC + if [ $portal != ${OCF_RESKEY_portals_default} ] ; then + IFS=':' read -a sep_portal <<< "$portal" + ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/portals create "${sep_portal[0]}" "${sep_portal[1]}" || exit $OCF_ERR_GENERIC + fi done - else - ocf_run lio_node --permissive ${OCF_RESKEY_iqn} 1 || exit $OCF_ERR_GENERIC - # permissive mode enables read-only access by default, - # so we need to change that to RW to be in line with - # the other implementations. - echo 0 > "/sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/attrib/demo_mode_write_protect" - if [ `cat /sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/attrib/demo_mode_write_protect` -ne 0 ]; then - ocf_log err "Failed to disable write protection for target ${OCF_RESKEY_iqn}." - exit $OCF_ERR_GENERIC + # in lio, we can set target parameters by manipulating + # the appropriate configfs entries + for param in ${OCF_RESKEY_additional_parameters}; do + name=${param%=*} + value=${param#*=} + configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/param/${name}" + if [ -e ${configfs_path} ]; then + echo ${value} > ${configfs_path} || exit $OCF_ERR_GENERIC + else + ocf_log warn "Unsupported iSCSI target parameter ${name}: will be ignored." + fi + done + # lio does per-initiator filtering by default. To disable + # this, we need to switch the target to "permissive mode". + if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then + for initiator in ${OCF_RESKEY_allowed_initiators}; do + ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/acls create ${initiator} || exit $OCF_ERR_GENERIC + done + else + ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/ set attribute authentication=0 demo_mode_write_protect=0 generate_node_acls=1 cache_dynamic_acls=1 || exit $OCF_ERR_GENERIC fi - fi - # TODO: add CHAP authentication support when it gets added - # back into LIO - ocf_run lio_node --disableauth ${OCF_RESKEY_iqn} 1 || exit $OCF_ERR_GENERIC - # Finally, we need to enable the target to allow - # initiators to connect - ocf_run lio_node --enabletpg=${OCF_RESKEY_iqn} 1 || exit $OCF_ERR_GENERIC - ;; - lio-t) - # lio distinguishes between targets and target portal - # groups (TPGs). We will always create one TPG, with the - # number 1. In lio, creating a network portal - # automatically creates the corresponding target if it - # doesn't already exist. - for portal in ${OCF_RESKEY_portals}; do - ocf_run targetcli /iscsi create ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC - if [ $portal != ${OCF_RESKEY_portals_default} ] ; then - IFS=':' read -a sep_portal <<< "$portal" - ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/portals create "${sep_portal[0]}" "${sep_portal[1]}" || exit $OCF_ERR_GENERIC - fi - done - # in lio, we can set target parameters by manipulating - # the appropriate configfs entries - for param in ${OCF_RESKEY_additional_parameters}; do - name=${param%=*} - value=${param#*=} - configfs_path="/sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/param/${name}" - if [ -e ${configfs_path} ]; then - echo ${value} > ${configfs_path} || exit $OCF_ERR_GENERIC - else - ocf_log warn "Unsupported iSCSI target parameter ${name}: will be ignored." - fi - done - # lio does per-initiator filtering by default. To disable - # this, we need to switch the target to "permissive mode". - if [ -n "${OCF_RESKEY_allowed_initiators}" ]; then - for initiator in ${OCF_RESKEY_allowed_initiators}; do - ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/acls create ${initiator} || exit $OCF_ERR_GENERIC - done - else - ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/ set attribute authentication=0 demo_mode_write_protect=0 generate_node_acls=1 cache_dynamic_acls=1 || exit $OCF_ERR_GENERIC - fi - # TODO: add CHAP authentication support when it gets added - # back into LIO - ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/ set attribute authentication=0 || exit $OCF_ERR_GENERIC -# ocf_run targetcli /iscsi - ;; - esac - - return $OCF_SUCCESS + # TODO: add CHAP authentication support when it gets added + # back into LIO + ocf_run targetcli /iscsi/${OCF_RESKEY_iqn}/tpg1/ set attribute authentication=0 || exit $OCF_ERR_GENERIC +# ocf_run targetcli /iscsi + ;; + esac + + iSCSITarget_monitor } iSCSITarget_stop() { - iSCSITarget_monitor - if [ $? = $OCF_SUCCESS ]; then + iSCSITarget_monitor + if [ $? -eq $OCF_NOT_RUNNING ]; then + return $OCF_SUCCESS + fi + local tid case $OCF_RESKEY_implementation in - iet) + iet) # Figure out the target ID tid=`sed -ne "s/tid:\([[:digit:]]\+\) name:${OCF_RESKEY_iqn}/\1/p" < /proc/net/iet/volume` if [ -z "${tid}" ]; then - ocf_log err "Failed to retrieve target ID for IQN ${OCF_RESKEY_iqn}" - exit $OCF_ERR_GENERIC + ocf_log err "Failed to retrieve target ID for IQN ${OCF_RESKEY_iqn}" + exit $OCF_ERR_GENERIC fi # Close existing connections. There is no other way to # do this in IET than to parse the contents of # /proc/net/iet/session. set -- $(sed -ne '/^tid:'${tid}' /,/^tid/ { - /^[[:space:]]*sid:\([0-9]\+\)/ { - s/^[[:space:]]*sid:\([0-9]*\).*/--sid=\1/; h; - }; - /^[[:space:]]*cid:\([0-9]\+\)/ { - s/^[[:space:]]*cid:\([0-9]*\).*/--cid=\1/; G; p; - }; - }' < /proc/net/iet/session) + /^[[:space:]]*sid:\([0-9]\+\)/ { + s/^[[:space:]]*sid:\([0-9]*\).*/--sid=\1/; h; + }; + /^[[:space:]]*cid:\([0-9]\+\)/ { + s/^[[:space:]]*cid:\([0-9]*\).*/--cid=\1/; G; p; + }; + }' < /proc/net/iet/session) while [[ -n $2 ]]; do - # $2 $1 looks like "--sid=X --cid=Y" - ocf_run ietadm --op delete \ - --tid=${tid} $2 $1 - shift 2 + # $2 $1 looks like "--sid=X --cid=Y" + ocf_run ietadm --op delete \ + --tid=${tid} $2 $1 + shift 2 done - # In iet, unassigning a user from a target and + # In iet, unassigning a user from a target and # deleting the user account is one operation. if [ -n "${OCF_RESKEY_incoming_username}" ]; then - ocf_run ietadm --op delete --user \ + ocf_run ietadm --op delete --user \ --tid=${tid} \ --params=IncomingUser=${OCF_RESKEY_incoming_username} \ || exit $OCF_ERR_GENERIC fi # Loop on delete. Keep trying until we time out, if # necessary. while true; do - if ietadm --op delete --tid=${tid}; then - ocf_log debug "Removed target ${OCF_RESKEY_iqn}." - break - else - ocf_log warn "Failed to remove target ${OCF_RESKEY_iqn}, retrying." - sleep 1 - fi + if ietadm --op delete --tid=${tid}; then + ocf_log debug "Removed target ${OCF_RESKEY_iqn}." + break + else + ocf_log warn "Failed to remove target ${OCF_RESKEY_iqn}, retrying." + sleep 1 + fi done # Avoid stale /etc/initiators.{allow,deny} entries # for this target if [ -e /etc/initiators.deny ]; then - ocf_run sed -e "/^${OCF_RESKEY_iqn}[[:space:]]/d" \ + ocf_run sed -e "/^${OCF_RESKEY_iqn}[[:space:]]/d" \ -i /etc/initiators.deny fi if [ -e /etc/initiators.allow ]; then - ocf_run sed -e "/^${OCF_RESKEY_iqn}[[:space:]]/d" \ + ocf_run sed -e "/^${OCF_RESKEY_iqn}[[:space:]]/d" \ -i /etc/initiators.allow fi ;; - tgt) + tgt) tid="${OCF_RESKEY_tid}" # Close existing connections. There is no other way to # do this in tgt than to parse the output of "tgtadm --op # show". set -- $(tgtadm --lld iscsi --op show --mode target \ - | sed -ne '/^Target '${tid}':/,/^Target/ { - /^[[:space:]]*I_T nexus: \([0-9]\+\)/ { - s/^.*: \([0-9]*\).*/--sid=\1/; h; - }; - /^[[:space:]]*Connection: \([0-9]\+\)/ { - s/^.*: \([0-9]*\).*/--cid=\1/; G; p; - }; - /^[[:space:]]*LUN information:/ q; - }') + | sed -ne '/^Target '${tid}':/,/^Target/ { + /^[[:space:]]*I_T nexus: \([0-9]\+\)/ { + s/^.*: \([0-9]*\).*/--sid=\1/; h; + }; + /^[[:space:]]*Connection: \([0-9]\+\)/ { + s/^.*: \([0-9]*\).*/--cid=\1/; G; p; + }; + /^[[:space:]]*LUN information:/ q; + }') while [[ -n $2 ]]; do - # $2 $1 looks like "--sid=X --cid=Y" - ocf_run tgtadm --lld iscsi --op delete --mode connection \ + # $2 $1 looks like "--sid=X --cid=Y" + ocf_run tgtadm --lld iscsi --op delete --mode connection \ --tid=${tid} $2 $1 - shift 2 + shift 2 done - # In tgt, we must first unbind the user account from + # In tgt, we must first unbind the user account from # the target, then remove the account itself. if [ -n "${OCF_RESKEY_incoming_username}" ]; then - ocf_run tgtadm --lld iscsi --mode account --op unbind \ - --tid=${tid} \ - --user=${OCF_RESKEY_incoming_username} || exit $OCF_ERR_GENERIC - ocf_run tgtadm --lld iscsi --mode account --op delete \ - --user=${OCF_RESKEY_incoming_username} || exit $OCF_ERR_GENERIC + ocf_run tgtadm --lld iscsi --mode account --op unbind \ + --tid=${tid} \ + --user=${OCF_RESKEY_incoming_username} || exit $OCF_ERR_GENERIC + ocf_run tgtadm --lld iscsi --mode account --op delete \ + --user=${OCF_RESKEY_incoming_username} || exit $OCF_ERR_GENERIC fi # Loop on delete. Keep trying until we time out, if # necessary. while true; do - if tgtadm --lld iscsi --op delete --mode target --tid=${tid}; then - ocf_log debug "Removed target ${OCF_RESKEY_iqn}." - break - else - ocf_log warn "Failed to remove target ${OCF_RESKEY_iqn}, retrying." - sleep 1 - fi + if tgtadm --lld iscsi --op delete --mode target --tid=${tid}; then + ocf_log debug "Removed target ${OCF_RESKEY_iqn}." + break + else + ocf_log warn "Failed to remove target ${OCF_RESKEY_iqn}, retrying." + sleep 1 + fi done # In tgt, we don't have to worry about our ACL # entries. They are automatically removed upon target # deletion. ;; - lio) + lio) # In lio, removing a target automatically removes all # associated TPGs, network portals, and LUNs. ocf_run lio_node --deliqn ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC ;; - lio-t) - ocf_run targetcli /iscsi delete ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC - ;; + lio-t) + ocf_run targetcli /iscsi delete ${OCF_RESKEY_iqn} || exit $OCF_ERR_GENERIC + ;; esac - fi - return $OCF_SUCCESS + return $OCF_SUCCESS } iSCSITarget_monitor() { - case $OCF_RESKEY_implementation in + case $OCF_RESKEY_implementation in iet) - grep -Eq "tid:[0-9]+ name:${OCF_RESKEY_iqn}" /proc/net/iet/volume && return $OCF_SUCCESS - ;; + grep -Eq "tid:[0-9]+ name:${OCF_RESKEY_iqn}" /proc/net/iet/volume && return $OCF_SUCCESS + ;; tgt) - tgtadm --lld iscsi --op show --mode target \ + tgtadm --lld iscsi --op show --mode target \ | grep -Eq "Target [0-9]+: ${OCF_RESKEY_iqn}" && return $OCF_SUCCESS - ;; + ;; lio | lio-t) - # if we have no configfs entry for the target, it's - # definitely stopped - [ -d /sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn} ] || return $OCF_NOT_RUNNING - # if the target is there, but its TPG is not enabled, then - # we also consider it stopped - [ `cat /sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/enable` -eq 1 ] || return $OCF_NOT_RUNNING - return $OCF_SUCCESS - ;; - esac - - return $OCF_NOT_RUNNING + # if we have no configfs entry for the target, it's + # definitely stopped + [ -d /sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn} ] || return $OCF_NOT_RUNNING + # if the target is there, but its TPG is not enabled, then + # we also consider it stopped + [ `cat /sys/kernel/config/target/iscsi/${OCF_RESKEY_iqn}/tpgt_1/enable` -eq 1 ] || return $OCF_NOT_RUNNING + return $OCF_SUCCESS + ;; + esac + + return $OCF_NOT_RUNNING } iSCSITarget_validate() { - # Do we have all required variables? - local required_vars - case $OCF_RESKEY_implementation in + # Do we have all required variables? + local required_vars + case $OCF_RESKEY_implementation in iet) - required_vars="iqn" - ;; + required_vars="iqn" + ;; tgt) - required_vars="iqn tid" - ;; - esac - for var in ${required_vars}; do - param="OCF_RESKEY_${var}" - if [ -z "${!param}" ]; then - ocf_log error "Missing resource parameter \"$var\"!" - exit $OCF_ERR_CONFIGURED - fi - done + required_vars="iqn tid" + ;; + esac - # Is the configured implementation supported? - case "$OCF_RESKEY_implementation" in + for var in ${required_vars}; do + param="OCF_RESKEY_${var}" + if [ -z "${!param}" ]; then + ocf_exit_reason "Missing resource parameter \"$var\"!" + exit $OCF_ERR_CONFIGURED + fi + done + + # Is the configured implementation supported? + case "$OCF_RESKEY_implementation" in "iet"|"tgt"|"lio"|"lio-t") - ;; + ;; "") - # The user didn't specify an implementation, and we were - # unable to determine one from installed binaries (in - # other words: no binaries for any supported - # implementation could be found) - ocf_log error "Undefined iSCSI target implementation" - exit $OCF_ERR_INSTALLED - ;; + # The user didn't specify an implementation, and we were + # unable to determine one from installed binaries (in + # other words: no binaries for any supported + # implementation could be found) + ocf_exit_reason "Undefined iSCSI target implementation" + exit $OCF_ERR_INSTALLED + ;; *) - ocf_log error "Unsupported iSCSI target implementation \"$OCF_RESKEY_implementation\"!" - exit $OCF_ERR_CONFIGURED - ;; - esac - - # Do we have any configuration parameters that the current - # implementation does not support? - local unsupported_params - local var - local envar - case $OCF_RESKEY_implementation in + ocf_exit_reason "Unsupported iSCSI target implementation \"$OCF_RESKEY_implementation\"!" + exit $OCF_ERR_CONFIGURED + ;; + esac + + # Do we have any configuration parameters that the current + # implementation does not support? + local unsupported_params + local var + local envar + case $OCF_RESKEY_implementation in iet|tgt) - # IET and tgt do not support binding a target portal to a - # specific IP address. - unsupported_params="portals" - ;; + # IET and tgt do not support binding a target portal to a + # specific IP address. + unsupported_params="portals" + ;; lio|lio-t) - # TODO: Remove incoming_username and incoming_password - # from this check when LIO 3.0 gets CHAP authentication - unsupported_params="tid incoming_username incoming_password" - ;; - esac - for var in ${unsupported_params}; do - envar=OCF_RESKEY_${var} - defvar=OCF_RESKEY_${var}_default - if [ -n "${!envar}" ]; then - if [[ "${!envar}" != "${!defvar}" ]];then - case "$__OCF_ACTION" in - start|validate-all) - ocf_log warn "Configuration parameter \"${var}\"" \ - "is not supported by the iSCSI implementation" \ - "and will be ignored." ;; - esac - fi - fi - done + # TODO: Remove incoming_username and incoming_password + # from this check when LIO 3.0 gets CHAP authentication + unsupported_params="tid incoming_username incoming_password" + ;; + esac - if ! ocf_is_probe; then - # Do we have all required binaries? + for var in ${unsupported_params}; do + envar=OCF_RESKEY_${var} + defvar=OCF_RESKEY_${var}_default + if [ -n "${!envar}" ]; then + if [[ "${!envar}" != "${!defvar}" ]];then + case "$__OCF_ACTION" in + start|validate-all) + ocf_log warn "Configuration parameter \"${var}\"" \ + "is not supported by the iSCSI implementation" \ + "and will be ignored." ;; + esac + fi + fi + done + + if ! ocf_is_probe; then + # Do we have all required binaries? case $OCF_RESKEY_implementation in - iet) + iet) check_binary ietadm ;; - tgt) + tgt) check_binary tgtadm ;; - lio) + lio) check_binary tcm_node check_binary lio_node ;; - lio-t) - check_binary targetcli - ;; + lio-t) + check_binary targetcli + ;; esac - # Is the required kernel functionality available? + # Is the required kernel functionality available? case $OCF_RESKEY_implementation in - iet) + iet) [ -d /proc/net/iet ] if [ $? -ne 0 ]; then - ocf_log err "/proc/net/iet does not exist or is not a directory -- check if required modules are loaded." - exit $OCF_ERR_INSTALLED + ocf_log err "/proc/net/iet does not exist or is not a directory -- check if required modules are loaded." + exit $OCF_ERR_INSTALLED fi ;; - tgt) - # tgt is userland only + tgt) + # tgt is userland only ;; - lio) - # lio needs configfs to be mounted + lio) + # lio needs configfs to be mounted if ! grep -Eq "^.*/sys/kernel/config[[:space:]]+configfs" /proc/mounts; then - ocf_log err "configfs not mounted at /sys/kernel/config -- check if required modules are loaded." - exit $OCF_ERR_INSTALLED + ocf_log err "configfs not mounted at /sys/kernel/config -- check if required modules are loaded." + exit $OCF_ERR_INSTALLED fi - # check for configfs entries created by target_core_mod + # check for configfs entries created by target_core_mod if [ ! -d /sys/kernel/config/target ]; then - ocf_log err "/sys/kernel/config/target does not exist or is not a directory -- check if required modules are loaded." - exit $OCF_ERR_INSTALLED + ocf_log err "/sys/kernel/config/target does not exist or is not a directory -- check if required modules are loaded." + exit $OCF_ERR_INSTALLED fi ;; - lio-t) - #targetcli loads the needed kernel modules - ;; + lio-t) + #targetcli loads the needed kernel modules + ;; esac - fi + fi - return $OCF_SUCCESS + return $OCF_SUCCESS } case $1 in meta-data) meta_data exit $OCF_SUCCESS ;; usage|help) iSCSITarget_usage exit $OCF_SUCCESS ;; esac # Everything except usage and meta-data must pass the validate test iSCSITarget_validate case $__OCF_ACTION in start) iSCSITarget_start;; stop) iSCSITarget_stop;; monitor|status) iSCSITarget_monitor;; reload) ocf_log err "Reloading..." - iSCSITarget_start + iSCSITarget_start ;; validate-all) ;; *) iSCSITarget_usage exit $OCF_ERR_UNIMPLEMENTED ;; esac rc=$? ocf_log debug "${OCF_RESOURCE_INSTANCE} $__OCF_ACTION : $rc" exit $rc