diff --git a/heartbeat/storage-mon.in b/heartbeat/storage-mon.in index 4cd861c1b..d764b49d7 100644 --- a/heartbeat/storage-mon.in +++ b/heartbeat/storage-mon.in @@ -1,263 +1,263 @@ #!@BASH_SHELL@ # # Copyright (C) 2021 Red Hat, Inc. All rights reserved. # # Authors: Christine Caulfield # Fabio M. Di Nitto # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # # # Checks storage I/O status of all given drives and writes the #health-storage # status into the CIB # Implementation is heavily based on ocf:pacemaker:HealtSMART # # It sends a single block on IO to a radom location on the device and reports any errors returned. # If the IO hangs, that will also be returned. (bear in mind tha tmay also hang the C app in some # instances). # # It's worth making a note in the RA description that the smartmon RA is also recommended (this # does not replace it), and that Pacemaker health checking should be configued. # # https://clusterlabs.org/pacemaker/doc/2.1/Pacemaker_Explained/singlehtml/index.html#tracking-node-health ####################################################################### ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs # STORAGEMON=$HA_BIN/storage_mon ATTRDUP=/usr/sbin/attrd_updater OCF_RESKEY_CRM_meta_interval_default="0" OCF_RESKEY_io_timeout_default="10" OCF_RESKEY_inject_errors_default="" OCF_RESKEY_state_file_default="${HA_RSCTMP%%/}/storage-mon-${OCF_RESOURCE_INSTANCE}.state" # Explicitly list all environment variables used, to make static analysis happy : ${OCF_RESKEY_CRM_meta_interval:=${OCF_RESKEY_CRM_meta_interval_default}} : ${OCF_RESKEY_drives:=""} : ${OCF_RESKEY_io_timeout:=${OCF_RESKEY_io_timeout_default}} : ${OCF_RESKEY_inject_errors:=${OCF_RESKEY_inject_errors_default}} : ${OCF_RESKEY_state_file:=${OCF_RESKEY_state_file_default}} ####################################################################### meta_data() { cat < 1.0 System health agent that checks the storage I/O status of the given drives and updates the #health-storage attribute. Usage is highly recommended in combination with the HealthSMART monitoring agent. The agent currently support a maximum of 25 devices per instance. storage I/O health status Location to store the resource state in. State file The drive(s) to check as a SPACE separated list. Enter the full path to the device, e.g. "/dev/sda". Drives to check -Specify disk I/O timeout in seconds. Minimum 1, recommeded 10 (default). +Specify disk I/O timeout in seconds. Minimum 1, recommended 10 (default). Disk I/O timeout Used only for testing! Specify % of I/O errors to simulate drives failures. Specify % of I/O errors to simulate drives failures END return $OCF_SUCCESS } ####################################################################### storage-mon_usage() { cat <, # Horms and others # # License: GNU General Public License (GPL) # # Note: * The original author of this software was Jacob Rief circa 1999 # * It was maintained by Jacob Rief and Horms # from November 1999 to July 2003. # * From July 2003 Horms is the maintainer # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of the # License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA # 02111-1307 USA # ###################################################################### # A Brief history of versions: # # From oldest to newest # 1.1-1.144: ldirecord maintained in CVS HEAD branch # 1.145-1.186: ldirectord.in maintained in CVS HEAD BRANCH # 1.186-ha-VERSION: ldirectord.in maintained in mercurial =head1 NAME ldirectord - Linux Director Daemon Daemon to monitor remote services and control Linux Virtual Server =head1 SYNOPSIS B [B<-d|--debug>] [--] [I] B | B | B | B | B | B | B B [B<-h|-?|--help|-v|--version>] =head1 DESCRIPTION B is a daemon to monitor and administer real servers in a cluster of load balanced virtual servers. B typically is started from heartbeat but can also be run from the command line. On startup B reads the file B<@sysconfdir@/ha.d/conf/>I. After parsing the file, entries for virtual servers are created on the LVS. Now at regular intervals the specified real servers are monitored and if they are considered alive, added to a list for each virtual server. If a real server fails, it is removed from that list. Only one instance of B can be started for each configuration, but more instances of B may be started for different configurations. This helps to group clusters of services. Normally one would put an entry inside B<@sysconfdir@/ha.d/haresources> I to start ldirectord from heartbeat. =head1 OPTIONS I: This is the name for the configuration as specified in the file B<@sysconfdir@/ha.d/conf/>I B<-d|--debug> Don't start as daemon and log verbosely. B<-h|--help> Print user manual and exit. B<-v|--version> Print version and exit. B the daemon for the specified configuration. B the daemon for the specified configuration. This is the same as sending a TERM signal to the running daemon. B the daemon for the specified configuration. The same as stopping and starting. B the configuration file. This is only useful for modifications inside a virtual server entry. It will have no effect on adding or removing a virtual server block. This is the same as sending a HUP signal to the running daemon. B of the running daemon for the specified configuration. =head1 SYNTAX =head2 Description of how to write configuration files BI<(ip_address|hostname:portnumber|servicename)|firewall-mark> Defines a virtual service by IP-address (or hostname) and port (or servicename) or firewall-mark. A firewall-mark is an integer greater than zero. The configuration of marking packets is controlled using the C<-m> option to B(8). All real services and flags for a virtual service must follow this line immediately and be indented. BI Timeout in seconds for connect, external, external-perl and ping checks. If the timeout is exceeded then the real server is declared dead. If defined in a virtual server section then the global value is overridden. If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overridden by a per-virtual setting. If both checktimeout and negotiatetimeout are unset, the default is used. Default: 5 seconds BI Timeout in seconds for negotiate checks. If defined in a virtual server section then the global value is overridden. If undefined then the value of checktimeout is used. checktimeout is also a global value that may be overridden by a per-virtual setting. If both negotiatetimeout and checktimeout are unset, the default is used. Default: 30 seconds BI Defines the number of second between server checks. When fork=no this option defines the amount of time ldirectord sleeps between running all of the realserver checks in all virtual service pools. When fork=yes this option defines the amount of time each forked child sleeps per virtual service pool after running all realserver checks for that pool. If set in the virtual server section then the global value is overridden, but ONLY if using forking mode (BI). Default: 10 seconds BI This option is deprecated and slated for removal in a future version. Please see the 'failurecount' option. The number of times a check will be attempted before it is considered to have failed. Only works with ping checks. Note that the checktimeout/negotiatetimeout is additive, so if a connect check is used, checkcount is 3 and checktimeout is 2 seconds, then a total of 6 seconds worth of timeout will occur before the check fails. If defined in a virtual server section then the global value is overridden. Default: 1 BI The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0. If defined in a virtual server section then the global value is overridden. Default: 1 BB | B Defines if should continuously check the configuration file for modification. If this is set to 'yes' and the configuration file changed on disk and its modification time (mtime) is newer than the previous version, the configuration is automatically reloaded. Default: no BIB<"> If this directive is defined, B automatically calls the executable I after the configuration file has changed on disk. This is useful to update the configuration file through B on the other heartbeated host. The first argument to the callback is the name of the configuration. This directive might also be used to restart B automatically after the configuration file changed on disk. However, if B is set to yes, the configuration is reloaded anyway. BI [B | B | B] the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page. If defined in a virtual server section then the global value is overridden. BIB<"> If this directive is defined, the supplied script is executed whenever all real servers for a virtual service are down or when the first real server comes up again. In the first case, it is called with "start" as its first argument, in the latter with "stop". Additional parameters are vserver with vport (vserver:vport) as second param and protocol (tcp/udp) as third param to identify the virtual service within the fallback script. If defined in a virtual server section then the global value is overridden. BIB<">|syslog_facility An alternative logfile might be specified with this directive. If the logfile does not have a leading '/', it is assumed to be a syslog(3) facility name. Default: log directly to the file I. BI[, I]...B<"> A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods. Multiple addresses may be supplied, comma delimited. If defined in a virtual server section then the global value is overridden. BI A valid email address to use as the from address of the email alerts. You can use a plain email address or any RFC-compliant string for the From header in the body of an email message (such as: "ldirectord Alerts" ) Do not quote this string unless you want the quotes passed in as part of the From header. Default: unset, take system generated default (probably root@hostname) B I Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration option. If defined in a virtual server section then the global value is overridden. Default: 0 BB | B | B | B | B | B,... Comma delimited list of server states in which email alerts should be sent. B is a short-hand for "B,B,B,B". If B is specified, no other option may be specified, otherwise options are ored with each other. If defined in a virtual server section then the global value is overridden. Default: all BIB<"> A valid SMTP server address to use for sending email via SMTP. If defined in a virtual server section then the global value is overridden. BIB<"> Use this directive to start an instance of ldirectord for the named I. BB | B If I, then ldirectord does not go into background mode. All log-messages are redirected to stdout instead of a logfile. This is useful to run B supervised from daemontools. See http://untroubled.org/rpms/daemontools/ or http://cr.yp.to/daemontools.html for details. Default: I BB | B If I, then ldirectord will spawn a child process for every virtual server, and run checks against the real servers from them. This will increase response times to changes in real server status in configurations with many virtual servers. This may also use less memory then running many separate instances of ldirectord. Child processes will be automatically restarted if they die. Default: I BB | B If I, then when real or failback servers are determined to be down, they are not actually removed from the kernel's LVS table. Rather, their weight is set to zero which means that no new connections will be accepted. This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the real server, until the persistent timeout can expire. See L for more information on persistent connections. This side-effect can be avoided by running the following: echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template If the proc file isn't present this probably means that the kernel doesn't have LVS support, LVS support isn't loaded, or the kernel is too old to have the proc file. Running ipvsadm as root should load LVS into the kernel if it is possible. If I, then the real or failback servers will be removed from the kernel's LVS table. The default is I. If defined in a virtual server section then the global value is overridden. Default: I BB | B If I, then when real or failback servers are determined to be down, they are readded to the kernel's LVS table with weight 0 if -they do not exist in the table. Setting the value to no, allows manually +they do not exist in the table. Setting the value to no, allows manually removing the realserver to manually disable all persistent connections. BB | B If I, then when ldirectord exits it will remove all of the virtual server pools that it is managing from the kernel's LVS table. If I, then the virtual server pools it is managing and any real or failback servers listed in them at the time ldirectord exits will be left as-is. If you want to be able to stop ldirectord without having traffic to your realservers interrupted you will want to set this to I. If defined in a virtual server section then the global value is overridden. Default: I BI If this option is set ldirectord will look for a special file in the specified directory and, if found, force the status of the real server identified by the file to down, skipping the normal health check. This would be useful if you wish to force servers down for maintenance without having to modify the actual ldirectord configuration file. For example, given a realserver with IP 172.16.1.2, service on port 4444, and a resolvable reverse DNS entry pointing to "realserver2.example.com" ldirectord will check for the existence of the following files: =over =item 172.16.1.2:4444 =item 172.16.1.2 =item realserver2.example.com:4444 =item realserver2.example.com =item realserver2:4444 =item realserver2 =back If any one of those files is found then ldirectord will immediately force the status of the server to down as if the check had failed. Note: Since it checks for the IP/hostname without the port this means you can decide to place an entire realserver into maintenance across a large number of virtual service pools with a single file (if you were going to reboot the server, for instance) or include the port number and put just a particular service into maintenance. This option is not valid in a virtual server section. Default: disabled =head2 Section virtual The following commands must follow a B entry and must be indented with a minimum of 4 spaces or one tab. B Iip_address|hostname][:portnumber|servicename>] B | B | B [I] [B<">IB<", ">IB<">] [ "" ] [ "" ] Defines a real service by IP-address (or hostname) and port (or servicename). If the port is omitted then a 0 will be used, this is intended primarily for fwmark services where the port for real servers is ignored. Optionally a range of IPv4 addresses (or two hostnames) may be given, in which case each IPv4 address in the range will be treated as a real server using the given port. The second argument defines the forwarding method, must be B, B or B. The third argument is optional and defines the weight for that real server. If omitted then a weight of 1 will be used. The next two arguments are also optional. They define a request-receive pair to be used to check if a server is alive. They override the request-receive pair in the virtual server section. These two strings must be quoted. If the request string starts with I the IP-address and port of the real server is overridden, otherwise the IP-address and port of the real server is used. -The last two optionals arguments set lower and upper connnection thresholds +The last two optionals arguments set lower and upper connection thresholds for real servers using -y and -x ipvsadm argument. =head2 For TCP and UDP (non fwmark) virtual services, unless the forwarding method is B and the IP address of a real server is non-local (not present on a interface on the host running ldirectord) then the port of the real server will be set to that of its virtual service. That is, port-mapping is only available to if the real server is another machine and the forwarding method is B. This is due to the way that the underlying LVS code in the kernel functions. =head2 More than one of these entries may be inside a virtual section. The checktimeout, negotiatetimeout, checkcount, fallback, emailalert, emailalertfreq and quiescent options listed above may also appear inside a virtual section, in which case the global setting is overridden. BB | B | B | B | B | B | B | BI Type of check to perform. Negotiate sends a request and matches a receive string. Connect only attempts to make a TCP/IP connection, thus the request and receive strings may be omitted. If checktype is a number then negotiate and connect is combined so that after each N connect attempts one negotiate attempt is performed. This is useful to check often if a service answers and in much longer intervals a negotiating check is done. Ping means that ICMP ping will be used to test the availability of real servers. Ping is also used as the connect check for UDP services. Off means no checking will take place and no real or fallback servers will be activated. On means no checking will take place and real servers will always be activated. Default is I. BB | B | B | B | B | B | B | B | B | B | B | B | B | B | B | B | B | B | B | B | B The type of service to monitor when using checktype=negotiate. None denotes a service that will not be monitored. simpletcp sends the B string to the server and tests it against the B regexp. The other types of checks connect to the server using the specified protocol. Please see the B and B sections for protocol specific information. Default: =over 4 =item * Virtual server port is 21: ftp =item * Virtual server port is 25: smtp =item * Virtual server port is 53: dns =item * Virtual server port is 80: http =item * Virtual server port is 110: pop =item * Virtual server port is 119: nntp =item * Virtual server port is 143: imap =item * Virtual server port is 389: ldap =item * Virtual server port is 443: https =item * Virtual server port is 587: submission =item * Virtual server port is 636 ldaps =item * Virtual server port is 993: imaps =item * Virtual server port is 995: pops =item * Virtual server port is 1521: oracle =item * Virtual server port is 1812: radius =item * Virtual server port is 3128: http_proxy =item * Virtual server port is 3306: mysql =item * Virtual server port is 5432: pgsql =item * Virtual server port is 5060: sip =item * Otherwise: none =back BIB<"> This setting is used if checktype is external or external-perl and is the command to be run to check the status of a real server. It should exit with status 0 if everything is ok, or non-zero otherwise. Four parameters are passed to the script: =over 4 =item * virtual server ip/firewall mark =item * virtual server port =item * real server ip =item * real server port =back If the checktype is external-perl then the command is assumed to be a Perl script and it is evaluated into an anonymous subroutine which is called at check time, avoiding a fork-exec. The argument signature and exit code conventions are identical to checktype external. That is, an external-perl checktype should also work as an external checktype. Default: /bin/true BI Number of port to monitor. Sometimes check port differs from service port. Default: port specified for each real server BIB<"> This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by an optional per real-server based request-string. For an HTTP/HTTPS check, this should be a relative URI, while it has to be absolute for the 'http_proxy' check type. In the latter case, this URI will be requested through the proxy backend that is being checked. For a DNS check this should the name of an A record, or the address of a PTR record to look up. For a MySQL, Oracle or PostgeSQL check, this should be an SQL SELECT query. The data returned is not checked, only that the answer is one or more rows. This is a required setting. For a simpletcp check, this string is sent verbatim except any occurrences of \n are replaced with a new line character. BIB<"> If the requested result contains this I, the real server is declared alive. The regexp must be inside quotes. Keep in mind that regexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an optional per real-server based receive regexp. For a DNS check this should be any one the A record's addresses or any one of the PTR record's names. In case of dynamic DNS answers (different answers on the same question) a regex to match multiple addresses or PTR record names could also defined. For a MySQL check, the receive setting is not used. B | B Sets the HTTP method which should be used to fetch the URI specified in the request-string. GET is the method used by default if the parameter is not set. If HEAD is used, the receive-string should be unset. Default: GET BIB<"> Used when using a negotiate check with HTTP or HTTPS. Sets the host header used in the HTTP request. In the case of HTTPS this generally needs to match the common name of the SSL certificate. If not set then the host header will be derived from the request url for the real server if present. As a last resort the IP address of the real server will be used. BIB<"> For FTP, IMAP, LDAP, MySQL, Oracle, POP and PostgreSQL, the username used to log in. For RADIUS the username is used for the attribute User-Name. For SIP, the username is used as both the to and from address for an OPTIONS query. Default: =over 4 =item * FTP: Anonymous =item * MySQL Oracle, and PostgreSQL: Must be specified in the configuration =item * SIP: ldirectord\@, hostname is derived as per the passwd option below. =item * Otherwise: empty string, which denotes that case authentication will not be attempted. =back BIB<"> Password to use to login to FTP, IMAP, LDAP, MySQL, Oracle, POP, PostgreSQL and SIP servers. For RADIUS the passwd is used for the attribute User-Password. Default: =over 4 =item * FTP: ldirectord\@, where hostname is the environment variable HOSTNAME evaluated at run time, or sourced from uname if unset. =item * Otherwise: empty string. In the case of LDAP, MySQL, Oracle, and PostgreSQL this means that authentication will not be performed. =back BIB<"> Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by B above) will be performed against. This is a required setting. BIB<"> Secret to use for RADIUS servers, this is the secret used to perform an Access-Request with the username (set by B above) and passwd (set by B above). Default: empty string B I Scheduler to be used by LVS for loadbalancing. For an information on the available sehedulers please see the ipvsadm(8) man page. Default: "wrr" B I Number of seconds for persistent client connections. B I | I Netmask to be used for granularity of persistent client connections. IPv4 netmask should be specified in dotted quad notation. IPv6 netmask should be specified as a prefix length between 1 and 128. B | B | B Protocol to be used. If the virtual is specified as an IP address and port then it must be one of tcp or udp. If a firewall mark then the protocol must be fwm. Default: =over 4 =item * Virtual is an IP address and port, and the port is not 53: tcp =item * Virtual is an IP address and port, and the port is 53: udp =item * Virtual is a firewall mark: fwm =back BIB<"> File to continuously log the real service checks to for this virtual service. This is useful for monitoring when and why real services were down or for statistics. The log format is: [timestamp|pid|real_service_id|status|message] Default: no separate logging of service checks. BB | B Specify that a virtual service uses one-packet scheduling. This option can be used only for UDP services. If this option is specified, all connections are created only to schedule one packet. Option is useful to schedule UDP packets from same client port to different real servers. BI A name for this service. This is for the sole purpose of making it easier to know which service is affected when e-mail notifications are sent out. It will be included in the e-mail subject and body. BI Notes about this service to be included in e-mail notifications (for example, purpose of the service or relevant administrator to contact). =head1 IPv6 Directives for IPv6 are virtual6, real6, fallback6. IPv6 addresses specified for virtual6, real6, fallback6 and a file of maintenance directory should be enclosed by brackets ([2001:db8::abcd]:80). Following checktype and service are supported. BB | B | B | B | B | B | BI BB | B | B | B | B | B | B Note: When using a service type with http or https, you need to install perl module perl-Net-INET6Glue. =head1 FILES B<@sysconfdir@/ha.d/ldirectord.cf> B BIB<.pid> B =head1 SEE ALSO L, L Ldirectord Web Page: http://www.vergenet.net/linux/ldirectord/ =head1 AUTHORS Horms Jacob Rief =cut use strict; # Set defaults for configuration variables in the "set_defaults" function use vars qw( $VERSION_STR $AUTOCHECK $CHECKINTERVAL $LDIRECTORD $LDIRLOG $NEGOTIATETIMEOUT $DEFAULT_NEGOTIATETIMEOUT $RUNPID $CHECKTIMEOUT $DEFAULT_CHECKTIMEOUT $CHECKCOUNT $FAILURECOUNT $QUIESCENT $READDQUIESCENT $FORKING $EMAILALERT $EMAILALERTFREQ $EMAILALERTSTATUS $EMAILALERTFROM $SMTP $CLEANSTOP $MAINTDIR $CALLBACK $CFGNAME $CMD $CONFIG $DEBUG $FALLBACK $FALLBACK6 $FALLBACKCOMMAND $SUPERVISED $IPVSADM $checksum $DAEMON_STATUS $DAEMON_STATUS_STARTING $DAEMON_STATUS_RUNNING $DAEMON_STATUS_STOPPING $DAEMON_STATUS_RELOADING $DAEMON_STATUS_ALL $DAEMON_TERM $DAEMON_HUP $DAEMON_CHLD $opt_d $opt_h $stattime %LD_INSTANCE @OLDVIRTUAL @REAL @VIRTUAL $HOSTNAME %EMAILSTATUS %FORK_CHILDREN $SERVICE_UP $SERVICE_DOWN %check_external_perl__funcs $CRLF ); $VERSION_STR = "Linux Director v1.186-ha"; $DAEMON_STATUS_STARTING = 0x1; $DAEMON_STATUS_RUNNING = 0x2; $DAEMON_STATUS_STOPPING = 0x4; $DAEMON_STATUS_RELOADING = 0x8; $DAEMON_STATUS_ALL = $DAEMON_STATUS_STARTING | $DAEMON_STATUS_RUNNING | $DAEMON_STATUS_STOPPING | $DAEMON_STATUS_RELOADING; $SERVICE_UP = 0; $SERVICE_DOWN =1; # default values $DAEMON_TERM = undef; $DAEMON_HUP = undef; $LDIRECTORD = ld_find_cmd("ldirectord", 1); if (! defined $LDIRECTORD) { $LDIRECTORD = "@sbindir@/ldirectord"; } $RUNPID = "/var/run/ldirectord"; $CRLF = "\x0d\x0a"; # Set global configuration default values: set_defaults(); use Getopt::Long; use Pod::Usage; #use English; #use Time::HiRes qw( gettimeofday tv_interval ); use Socket; use Socket6 qw(NI_NUMERICHOST NI_NUMERICSERV NI_NAMEREQD getaddrinfo getnameinfo inet_pton inet_ntop); # Workaround warnning messages : Three "_in6" symbols redefined. eval "use Socket6 qw(pack_sockaddr_in6)" unless defined &pack_sockaddr_in6; eval "use Socket6 qw(sockaddr_in6)" unless defined &sockaddr_in6; eval "use Socket6 qw(unpack_sockaddr_in6)" unless defined &unpack_sockaddr_in6; use Sys::Hostname; use POSIX qw(setsid :sys_wait_h); use Sys::Syslog qw(:DEFAULT setlogsock); BEGIN { # wrap exit() to preserve replacability *CORE::GLOBAL::exit = sub { CORE::exit(@_ ? shift : 0); }; } # command line options my @OLD_ARGV = @ARGV; my $opt_d = ''; my $opt_h = ''; my $opt_v = ''; Getopt::Long::Configure ("bundling", "no_auto_abbrev", "require_order"); GetOptions("debug|d" => \$opt_d, "help|h|?" => \$opt_h, "version|v" => \$opt_v) or usage(); # main code $DEBUG = $opt_d ? 3 : 0; if ($opt_h) { exec_wrapper("/usr/bin/perldoc -U $LDIRECTORD"); &ld_exit(127, "Exec failed"); } if ($opt_v) { print("$VERSION_STR\n" . "1999-2006 Jacob Rief, Horms and others\n" . "\n". "\n" . "ldirectord comes with ABSOLUTELY NO WARRANTY.\n" . "This is free software, and you are welcome to redistribute it\n". "under certain conditions. " . "See the GNU General Public Licence for details.\n"); &ld_exit(0, ""); } if ($DEBUG>0 and -f "./ipvsadm") { $IPVSADM="./ipvsadm"; } else { if (-x "/sbin/ipvsadm") { $IPVSADM="/sbin/ipvsadm"; } elsif (-x "/usr/sbin/ipvsadm") { $IPVSADM="/usr/sbin/ipvsadm"; } else { die "Can not find ipvsadm"; } } # There is a memory leak in perl's socket code when # the default IO layer is used. So use "perlio" unless # something else has been explicitly set. # http://archive.develooper.com/perl5-porters@perl.org/msg85468.html unless(defined($ENV{'PERLIO'})) { $ENV{'PERLIO'} = "perlio"; exec_wrapper($0, @OLD_ARGV); } $DAEMON_STATUS = $DAEMON_STATUS_STARTING; ld_init(); ld_setup(); ld_start(); ld_cmd_children("start", %LD_INSTANCE); $DAEMON_STATUS = $DAEMON_STATUS_RUNNING; ld_main(); &ld_rm_file("$RUNPID.$CFGNAME.pid"); &ld_exit(0, "Reached end of \"main\""); # functions sub ld_init { # install signal handlers (this covers TERM) #require Net::LDAP; $SIG{'INT'} = \&ld_handler_term; $SIG{'QUIT'} = \&ld_handler_term; $SIG{'ILL'} = \&ld_handler_term; $SIG{'ABRT'} = \&ld_handler_term; $SIG{'FPE'} = \&ld_handler_term; $SIG{'SEGV'} = \&ld_handler_term; $SIG{'TERM'} = \&ld_handler_term; $SIG{'BUS'} = \&ld_handler_term; $SIG{'SYS'} = \&ld_handler_term; $SIG{'XCPU'} = \&ld_handler_term; $SIG{'XFSZ'} = \&ld_handler_term; $SIG{'IOT'} = \&ld_handler_term; # This used to call a signal handler, that logged a message # However, this typically goes to syslog and if syslog # is playing up a loop will occur. $SIG{'PIPE'} = "IGNORE"; # HUP is actually used $SIG{'HUP'} = \&ld_handler_hup; # Reap Children $SIG{'CHLD'} = \&ld_handler_chld; if (defined $ENV{HOSTNAME}) { $HOSTNAME = "$ENV{HOSTNAME}"; } else { use POSIX "uname"; my ($s, $n, $r, $v, $m) = uname; $HOSTNAME = $n; } # search for the correct configuration file if ( !defined $ARGV[0] ) { usage(); } if ( defined $ARGV[0] && defined $ARGV[1] ) { $CONFIG = $ARGV[0]; if ($CONFIG =~ /([^\/]+)$/) { $CFGNAME = $1; } $CMD = $ARGV[1]; } elsif ( defined $ARGV[0] ) { $CONFIG = "ldirectord.cf"; $CFGNAME = "ldirectord"; $CMD = $ARGV[0]; } if ( $CMD ne "start" and $CMD ne "stop" and $CMD ne "status" and $CMD ne "restart" and $CMD ne "try-restart" and $CMD ne "reload" and $CMD ne "force-reload") { usage(); } if ( -f "@sysconfdir@/ha.d/$CONFIG" ) { $CONFIG = "@sysconfdir@/ha.d/$CONFIG"; } elsif ( -f "@sysconfdir@/ha.d/conf/$CONFIG" ) { $CONFIG = "@sysconfdir@/ha.d/conf/$CONFIG"; } elsif ( ! -f "$CONFIG" ) { init_error("Config file $CONFIG not found"); } read_config(); undef @OLDVIRTUAL; { my $log_str = "Invoking ldirectord invoked as: $0 "; for my $i (@ARGV) { $log_str .= $i . " "; } ld_log($log_str); } my $oldpid; my $filepid; if (open(FILE, "<$RUNPID.$CFGNAME.pid")) { $_ = ; chomp; $filepid = $_; close(FILE); # Check to make sure this isn't a stale pid file if (open(FILE, "; if (/ldirectord/) { $oldpid = $filepid; } close(FILE); } } if (defined $oldpid) { if ($CMD eq "start") { ld_exit(0, "Exiting from ldirectord $CMD"); } elsif ($CMD eq "stop") { kill 15, $oldpid; ld_exit(0, "Exiting from ldirectord $CMD"); } elsif ($CMD eq "restart" or $CMD eq "try-restart") { kill 15, $oldpid; while (-f "$RUNPID.$CFGNAME.pid") { # wait until old pid file is removed sleep 1; } # N.B Fall through } elsif ($CMD eq "reload" or $CMD eq "force-reload") { kill 1, $oldpid; ld_exit(0, "Exiting from ldirectord $CMD"); } else { # status print STDERR "ldirectord for $CONFIG is running with pid: $oldpid\n"; ld_cmd_children("status", %LD_INSTANCE); ld_log("ldirectord for $CONFIG is running with pid: $oldpid"); ld_log("Exiting from ldirectord $CMD"); ld_exit(0, "Exiting from ldirectord $CMD"); } } else { if ($CMD eq "start" or $CMD eq "restart") { ; } elsif ($CMD eq "stop" or $CMD eq "try-restart") { ld_exit(0, "Exiting from ldirectord $CMD"); } elsif ($CMD eq "status") { my $status; if (defined $filepid) { print STDERR "ldirectord stale pid file " . "$RUNPID.$CFGNAME.pid for $CONFIG\n"; ld_log("ldirectord stale pid file " . "$RUNPID.$CFGNAME.pid for $CONFIG"); $status = 1; } else { $status = 3; } print "ldirectord is stopped for $CONFIG\n"; ld_exit($status, "Exiting from ldirectord $CMD"); } else { ld_log("ldirectord is stopped for $CONFIG"); ld_exit(1, "Exiting from ldirectord $CMD"); } } # Run as daemon if ($SUPERVISED eq "yes" || $opt_d) { &ld_log("Starting $VERSION_STR with pid: $$"); } else { &ld_log("Starting $VERSION_STR as daemon"); open(FILE, ">$RUNPID.$CFGNAME.pid") || init_error("Can not open $RUNPID.$CFGNAME.pid"); &ld_daemon(); print FILE "$$\n"; close(FILE); } } sub usage { pod2usage(-input => $LDIRECTORD, -exitval => -1); } sub init_error { my $msg = shift; chomp($msg); &ld_log("$msg"); unless ($opt_d) { print STDERR "$msg\n"; } ld_exit(1, "Initialisation Error"); } # ld_handler_term # If we get a signal then log it and quit sub ld_handler_term { my ($signal) = (@_); if (defined $DAEMON_TERM) { $SIG{'__DIE__'} = "IGNORE"; $SIG{"$signal"} = "IGNORE"; die("Exit Handler Repeatedly Called\n"); } $DAEMON_TERM = $signal; $DAEMON_STATUS = $DAEMON_STATUS_STOPPING; } sub ld_process_term { $DAEMON_STATUS = $DAEMON_STATUS_STOPPING; ld_cmd_children("stop", %LD_INSTANCE); ld_stop(); &ld_log("Linux Director Daemon terminated on signal: $DAEMON_TERM"); &ld_rm_file("$RUNPID.$CFGNAME.pid"); &ld_exit(0, "Linux Director Daemon terminated on signal: $DAEMON_TERM"); } sub ld_handler_hup { $DAEMON_HUP=1; } sub ld_process_hup { &ld_log("Reloading Linux Director Daemon config on signal"); $DAEMON_HUP = undef; &reread_config(); } sub ld_handler_chld { $DAEMON_CHLD=1; # NOTE: calling waitpid here would mess up $? } sub ld_process_chld { my $i = 0; undef $DAEMON_CHLD; while (waitpid(-1, WNOHANG) > 0) { print "child: $i\n"; $i++; } } sub check_signal { if (defined $DAEMON_TERM) { ld_process_term(); } if (defined $DAEMON_HUP) { ld_process_hup(); } if (defined $DAEMON_CHLD) { ld_process_chld(); } } sub reread_config { @OLDVIRTUAL = @VIRTUAL; @VIRTUAL = (); my %OLD_INSTANCE = %LD_INSTANCE; my %RELOAD; my %STOP; my %START; my $child; $DAEMON_STATUS = $DAEMON_STATUS_RELOADING; eval { &read_config(); foreach $child (keys %LD_INSTANCE) { if (defined $OLD_INSTANCE{$child}) { $RELOAD{$child} = 1; } else { $START{$child} = 1; } } foreach $child (keys %OLD_INSTANCE) { if (not defined $LD_INSTANCE{$child}) { $STOP{$child} = 1; } } &ld_cmd_children("stop", %STOP); &ld_cmd_children("reload_or_start", %RELOAD); &ld_cmd_children("start", %START); foreach my $vid (keys %FORK_CHILDREN) { &ld_log("Killing child $vid (PID=$FORK_CHILDREN{$vid})"); kill 15, $FORK_CHILDREN{$vid}; } &ld_setup(); &ld_start(); }; if ($@) { @VIRTUAL = @OLDVIRTUAL; %LD_INSTANCE = %OLD_INSTANCE; } $DAEMON_STATUS = $DAEMON_STATUS_RUNNING; undef @OLDVIRTUAL; } sub parse_emailalertstatus { my ($line, $arg) = (@_); my @s = split/\s*,\s*/, $arg; my $none = 0; my $status = 0; for my $i (@s) { if ($i eq "none") { $none++; } } for my $i (@s) { if ($i eq "none") { next; } elsif ($i eq "all") { $status = $DAEMON_STATUS_ALL; } elsif ($i eq "starting") { $status |= $DAEMON_STATUS_STARTING; } elsif ($i eq "stopping") { $status |= $DAEMON_STATUS_STOPPING; } elsif ($i eq "running") { $status |= $DAEMON_STATUS_RUNNING; } elsif ($i eq "reloading") { $status |= $DAEMON_STATUS_RELOADING; } else { &config_error($line, "invalid email alert status at: \"$i\"") } if ($none > 0) { &config_error($line, "invalid email alert status: " . "\"$i\" specified with \"none\""); } } return $status; } sub set_defaults { $AUTOCHECK = "no"; $CALLBACK = undef; $CHECKCOUNT = 1; $CHECKINTERVAL = 10; $CHECKTIMEOUT = -1; $CLEANSTOP = "yes"; $DEFAULT_CHECKTIMEOUT = 5; $DEFAULT_NEGOTIATETIMEOUT = 30; $EMAILALERT = ""; $EMAILALERTFREQ = 0; $EMAILALERTFROM = undef; $EMAILALERTSTATUS = $DAEMON_STATUS_ALL; $FAILURECOUNT = 1; $FALLBACK = undef; $FALLBACK6 = undef; $FALLBACKCOMMAND = undef; $FORKING = "no"; $LDIRLOG = "/var/log/ldirectord.log"; $MAINTDIR = undef; $NEGOTIATETIMEOUT = -1; $QUIESCENT = "no"; $READDQUIESCENT = "no"; $SUPERVISED = "no"; $SMTP = undef; } sub read_emailalert { my ($line, $addr) = (@_); # Strip of enclosing quotes $addr =~ s/^\"([^"]*)\"$/$1/; $addr =~ /(.+)/ or &config_error($line, "no email address specified"); return $addr; } sub read_config { undef @VIRTUAL; undef @REAL; undef $CALLBACK; undef %LD_INSTANCE; undef $checksum; # Reset/set global config variables to defaults before parsing the config file. set_defaults(); $stattime = 0; my %virtual_seen; open(CFGFILE, "<$CONFIG") or &config_error(0, "can not open file $CONFIG"); my $line = 0; my $linedata; while() { $line++; $linedata = $_; outer_loop: if ($linedata =~ /^virtual(6)?\s*=\s*(.*)/) { my $af = defined($1) ? AF_INET6 : AF_INET; my $vattr = $2; my $ip_port = undef; my $fwm = undef; my $virtual_id; my $virtual_line = $line; my $virtual_port; my $fallback_line; my @rsrv_todo; if ($vattr =~ /^(\d+\.\d+\.\d+\.\d+):([0-9A-Za-z-_]+)/ && $af == AF_INET) { $ip_port = "$1:$2"; $virtual_port = $2; } elsif ($vattr =~ /^([0-9A-Za-z._+-]+):([0-9A-Za-z-_]+)/) { $ip_port = "$1:$2"; $virtual_port = $2; } elsif ($vattr =~ /^(\d+)/){ $fwm = $1; } elsif ($vattr =~ /^\[([0-9A-Fa-f:]+)\]:([0-9A-Za-z-_]+)/ && $af == AF_INET) { &config_error($line, "cannot specify an IPv6 address here. please use \"virtual6\" instead."); } elsif ($vattr =~ /^\[([0-9A-Fa-f:]+)\]:([0-9A-Za-z-_]+)/ && $af == AF_INET6) { my $v6addr = $1; my $v6port = $2; if (!inet_pton(AF_INET6,$v6addr)) { &config_error($line,"invalid ipv6 address for virtual server"); } $ip_port = "[$v6addr]:$v6port"; $virtual_port = $v6port; } else { &config_error($line, "invalid address for virtual server"); } my (%vsrv, @rsrv); if ($ip_port) { $vsrv{checktype} = "negotiate"; $vsrv{protocol} = "tcp"; if ($ip_port =~ /:(53|domain)$/) { $vsrv{protocol} = "udp"; } $vsrv{port} = $virtual_port; } else { $vsrv{fwm} = $fwm; $vsrv{checktype} = "negotiate"; $vsrv{protocol} = "fwm"; $vsrv{service} = "none"; $vsrv{port} = "0"; } $vsrv{addressfamily} = $af; $vsrv{real} = \@rsrv; $vsrv{scheduler} = "wrr"; $vsrv{checkcommand} = "/bin/true"; $vsrv{request} = "/"; $vsrv{receive} = ""; $vsrv{login} = ""; $vsrv{passwd} = ""; $vsrv{database} = ""; $vsrv{checktimeout} = -1; $vsrv{checkcount} = -1; $vsrv{negotiatetimeout} = -1; $vsrv{failurecount} = -1; $vsrv{num_connects} = 0; $vsrv{httpmethod} = "GET"; $vsrv{secret} = ""; $vsrv{ops} = "no"; push(@VIRTUAL, \%vsrv); while() { $line++; $linedata=$_; if(m/^\s*#/) { next; } s/#.*//; s/\t/ /g; unless (/^ {4,}(.+)/) { last; } my $rcmd = $1; if ($rcmd =~ /^(real(6)?)\s*=\s*(.*)/) { if ($af == AF_INET && defined($2) || $af == AF_INET6 && ! defined($2)) { &config_error($line, join("", ("cannot specify \"$1\" here. please use \"real", ($af == AF_INET) ? "" : "6", "\" instead"))); } push @rsrv_todo, [$3, $line]; } elsif ($rcmd =~ /^request\s*=\s*\"(.*)\"/) { $1 =~ /(.+)/ or &config_error($line, "no request string specified"); $vsrv{request} = $1; unless($vsrv{request}=~/^\//){ $vsrv{request} = "/" . $vsrv{request}; } } elsif ($rcmd =~ /^receive\s*=\s*\"(.*)\"/) { $1 =~ /(.+)/ or &config_error($line, "invalid receive string"); $vsrv{receive} = $1; } elsif ($rcmd =~ /^checktype\s*=\s*(.*)/){ if ($1 =~ /(\d+)/ && $1>=0) { $vsrv{num_connects} = $1; $vsrv{checktype} = "combined"; } elsif ( $1 =~ /([\w-]+)/ && ($1 eq "connect" || $1 eq "negotiate" || $1 eq "ping" || $1 eq "off" || $1 eq "on" || $1 eq "external" || $1 eq "external-perl") ) { $vsrv{checktype} = $1; } else { &config_error($line, "checktype must be \"connect\", \"negotiate\", \"on\", \"off\", \"ping\", \"external\", \"external-perl\" or a positive number"); } } elsif ($rcmd =~ /^checkcommand\s*=\s*\"(.*)\"/ or $rcmd =~ /^checkcommand\s*=\s*(.*)/){ $1 =~ /(.+)/ or &config_error($line, "invalid check command"); $vsrv{checkcommand} = $1; } elsif ($rcmd =~ /^checktimeout\s*=\s*(.*)/){ $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid check timeout"); $vsrv{checktimeout} = $1; } elsif ($rcmd =~ /^connecttimeout\s*=\s*(.*)/){ &config_error($line, "connecttimeout directive " . "deprecated in favour of " . "negotiatetimeout"); } elsif ($rcmd =~ /^negotiatetimeout\s*=\s*(.*)/){ $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid negotiate timeout"); $vsrv{negotiatetimeout} = $1; } elsif ($rcmd =~ /^checkcount\s*=\s*(.*)/){ $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid check count"); $vsrv{checkcount} = $1; &config_warn($line, "checkcount option is deprecated and slated for removal. please see 'failurecount'"); } elsif ($rcmd =~ /^failurecount\s*=\s*(.*)/){ $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid failure count"); $vsrv{failurecount} = $1; } elsif ($rcmd =~ /^checkinterval\s*=\s*(.*)/){ $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid checkinterval"); $vsrv{checkinterval} = $1 } elsif ($rcmd =~ /^checkport\s*=\s*(.*)/){ $1 =~ /(\d+)/ or &config_error($line, "invalid port"); ( $1 > 0 && $1 < 65536 ) or &config_error($line, "checkport must be in range 1..65536"); $vsrv{checkport} = $1; } elsif ($rcmd =~ /^login\s*=\s*\"(.*)\"/) { $1 =~ /(.+)/ or &config_error($line, "invalid login string"); $vsrv{login} = $1; } elsif ($rcmd =~ /^passwd\s*=\s*\"(.*)\"/) { $1 =~ /(.+)/ or &config_error($line, "invalid password"); $vsrv{passwd} = $1; } elsif ($rcmd =~ /^database\s*=\s*\"(.*)\"/) { $1 =~ /(.+)/ or &config_error($line, "invalid database"); $vsrv{database} = $1; } elsif ($rcmd =~ /^secret\s*=\s*\"(.*)\"/) { $1 =~ /(.+)/ or &config_error($line, "invalid secret"); $vsrv{secret} = $1; } elsif ($rcmd =~ /^load\s*=\s*\"(.*)\"/) { $1 =~ /(\w+)/ or &config_error($line, "invalid string for load testing"); $vsrv{load} = $1; } elsif ($rcmd =~ /^scheduler\s*=\s*(.*)/) { # Intentionally ommit checking the # scheduler against a list of know # schedulers. This is because from # time to time new schedulers are # added. But ldirectord is # maintained distributed # independently of this. Thus # ldirectord needs to be manually # updated/upgraded. So just accept # any scheduler that matches # [a-z]+. I.e. is syntactically # correct (all schedulers so far # match that pattern). Ipvsadm will # report an error is a scheduler # isn't available / doesn't exist. $1 =~ /([a-z]+)/ or &config_error($line, "invalid scheduler, should be only lowercase letters (a-z)"); $vsrv{scheduler} = $1; } elsif ($rcmd =~ /^persistent\s*=\s*(.*)/) { $1 =~ /(\d+)/ or &config_error($line, "invalid persistent timeout"); $vsrv{persistent} = $1; } elsif ($rcmd =~ /^schedflags\s*=\s*(.*)/) { $1 =~ /(\S+)/ or &config_error($line, "invalid sched-flags"); $vsrv{schedflags} = $1; } elsif ($rcmd =~ /^netmask\s*=\s*(.*)/) { my $val = $1; if ($vsrv{addressfamily} == AF_INET6) { if ($val !~ /^\d+$/ or ($val < 1 || $val > 128)) { &config_error($line, "invalid netmask: a prefix length between 1 and 128 is required"); } } else { if ($val !~ /^\d+\.\d+\.\d+\.\d+$/) { &config_error($line, "invalid netmask: dotted quad notation is required"); } } $vsrv{netmask} = $val; } elsif ($rcmd =~ /^protocol\s*=\s*(.*)/) { if ( $1 =~ /(\w+)/ ) { if ( $vsrv{protocol} eq "fwm" ) { if ($1 eq "fwm" ) { ; #Do nothing, it is already set } else { &config_error($line, "protocol must be fwm if the virtual service is a fwmark (a number)"); } } else { # tcp or udp if ($1 eq "tcp" || $1 eq "udp") { $vsrv{protocol} = $1; } else { &config_error($line, "protocol must be tcp or udp if the virtual service is an address and port"); } } } else { &config_error($line, "invalid protocol"); } } elsif ($rcmd =~ /^ops\s*=\s*(.*)/) { if ($1 eq "yes" || $1 eq "no") { $vsrv{ops} = $1; } else { &config_error($line, "ops must be 'yes' or 'no'"); } } elsif ($rcmd =~ /^service\s*=\s*(.*)/) { $1 =~ /(\w+)/ && ($1 eq "dns" || $1 eq "ftp" || $1 eq "http" || $1 eq "https" || $1 eq "http_proxy" || $1 eq "imap" || $1 eq "imaps" || $1 eq "ldap" || $1 eq "ldaps" || $1 eq "nntp" || $1 eq "mysql" || $1 eq "none" || $1 eq "oracle"|| $1 eq "pop" || $1 eq "pops" || $1 eq "radius"|| $1 eq "pgsql" || $1 eq "sip" || $1 eq "smtp" || $1 eq "submission" || $1 eq "simpletcp") or &config_error($line, "service must " . "be dns, ftp, " . "http, https, " . "http_proxy, " . "imap, imaps, " . "ldap, ldaps, " . "mysql, nntp, " . "none, oracle, " . "pop, pops, " . "radius, " . "pgsql, " . "simpletcp, " . "sip, smtp " . "or submission"); $vsrv{service} = $1; if($vsrv{service} eq "ftp" and $vsrv{login} eq "") { $vsrv{login} = "anonymous"; } elsif($vsrv{service} eq "sip" and $vsrv{login} eq "") { $vsrv{login} = "ldirectord\@$HOSTNAME"; } if($vsrv{service} eq "ftp" and $vsrv{passwd} eq "") { $vsrv{passwd} = "ldirectord\@$HOSTNAME"; } } elsif ($rcmd =~ /^httpmethod\s*=\s*(.*)/) { $1 =~ /(\w+)/ && (uc($1) eq "GET" || uc($1) eq "HEAD") or &config_error($line, "httpmethod must be GET or HEAD"); $vsrv{httpmethod} = uc($1); } elsif ($rcmd =~ /^virtualhost\s*=\s*(.*)/) { $1 =~ /\"?([^\"]*)\"?/ or &config_error($line, "invalid virtualhost"); $vsrv{virtualhost} = $1; } elsif ($rcmd =~ /^(fallback(6)?)\s*=\s*(.*)/) { # Allow specification of a virtual-specific fallback host if ($af == AF_INET && defined($2) || $af == AF_INET6 && ! defined($2)) { &config_error($line, join("", ("cannot specify \"$1\" here. please use \"fallback", ($af == AF_INET) ? "" : "6", "\" instead"))); } $fallback_line=$line; $vsrv{fallback} = parse_fallback($line, $3, \%vsrv); } elsif ($rcmd =~ /^fallbackcommand\s*=\s*\"(.*)\"/ or $rcmd =~ /^fallbackcommand\s*=\s*(.*)/) { $1 =~ /(.+)/ or &config_error($line, "invalid fallback command"); $vsrv{fallbackcommand} = $1; } elsif ($rcmd =~ /^quiescent\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "quiescent must be 'yes' or 'no'"); $vsrv{quiescent} = $1; } elsif ($rcmd =~ /^emailalert\s*=\s*(.*)/) { $vsrv{emailalert} = read_emailalert($line, $1); } elsif ($rcmd =~ /^emailalertfreq\s*=\s*(\d*)/) { $1 =~ /(\d+)/ or &config_error($line, "invalid email alert frequency"); $vsrv{emailalertfreq} = $1; } elsif ($rcmd =~ /^emailalertstatus\s*=\s*(.*)/) { $vsrv{emailalertstatus} = &parse_emailalertstatus($line, $1); } elsif ($rcmd =~ /^monitorfile\s*=\s*\"(.*)\"/ or $rcmd =~ /^monitorfile\s*=\s*(.*)/) { my $monitorfile = $1; unless (open(MONITORFILE, ">>$monitorfile") and close(MONITORFILE)) { &config_error($line, "unable to open monitorfile $monitorfile: $!"); } $vsrv{monitorfile} = $monitorfile; } elsif ($rcmd =~ /^cleanstop\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "cleanstop must be 'yes' or 'no'"); $vsrv{cleanstop} = $1; } elsif ($rcmd =~ /^smtp\s*=\s*(.*)/) { $1 =~ /(^([0-9A-Za-z._+-]+))/ or &config_error($line, "invalid SMTP server address"); $vsrv{smtp} = $1; } elsif ($rcmd =~ /^servicename\s*=\s*(.*)/) { $vsrv{servicename} = $1; } elsif ($rcmd =~ /^comment\s*=\s*(.*)/) { $vsrv{comment} = $1; } else { &config_error($line, "Unknown command \"$linedata\""); } undef $linedata; } # As the protocol needs to be known to call # getservbyname() all resolution must be # delayed until the protocol is finalised. # That is after the entire configuration # for a virtual service has been parsed. &_ld_read_config_fallback_resolve($fallback_line, $vsrv{protocol}, $vsrv{fallback}, $af); &_ld_read_config_virtual_resolve($virtual_line, \%vsrv, $ip_port, $af); &_ld_read_config_real_resolve(\%vsrv, \@rsrv_todo, $af); # Check for duplicate now we have all the # information to generate the id $virtual_id = get_virtual_id_str(\%vsrv); if (defined $virtual_seen{$virtual_id}) { &config_error($line, "duplicate virtual server"); } $virtual_seen{$virtual_id} = 1; unless(defined($linedata)) { last; } #Arggh a goto :( goto outer_loop; } next if ($linedata =~ /^\s*$/ || $linedata =~ /^\s*#/); if ($linedata =~ /^checktimeout\s*=\s*(.*)/) { ($1 =~ /(\d+)/ && $1 && $1>0) or &config_error($line, "invalid check timeout value"); $CHECKTIMEOUT = $1; } elsif ($linedata =~ /^connecttimeout\s*=\s*(.*)/) { &config_error($line, "connecttimeout directive " . "deprecated in favour of " . "negotiatetimeout"); } elsif ($linedata =~ /^negotiatetimeout\s*=\s*(.*)/) { ($1 =~ /(\d+)/ && $1 && $1>0) or &config_error($line, "invalid negotiate timeout value"); $NEGOTIATETIMEOUT = $1; } elsif ($linedata =~ /^checkinterval\s*=\s*(.*)/) { $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid check interval value"); $CHECKINTERVAL = $1; } elsif ($linedata =~ /^checkcount\s*=\s*(.*)/) { $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid check count value"); $CHECKCOUNT = $1; &config_warn($line, "checkcount option is deprecated and slated for removal. please see 'failurecount'"); } elsif ($linedata =~ /^failurecount\s*=\s*(.*)/) { $1 =~ /(\d+)/ && $1 or &config_error($line, "invalid failure count value"); $FAILURECOUNT = $1; } elsif ($linedata =~ /^fallback(6)?\s*=\s*(.*)/) { my $af = defined($1) ? AF_INET6 : AF_INET; my $tcp = parse_fallback($line, $2, undef); my $udp = parse_fallback($line, $2, undef); &_ld_read_config_fallback_resolve($line, "tcp", $tcp, $af); &_ld_read_config_fallback_resolve($line, "udp", $udp, $af); if ($af == AF_INET) { $FALLBACK = { "tcp" => $tcp, "udp" => $udp }; } else { $FALLBACK6 = { "tcp" => $tcp, "udp" => $udp }; } } elsif ($linedata =~ /^fallbackcommand\s*=\s*(.*)/) { $1 =~ /(.+)/ or &config_error($line, "invalid fallback command"); $FALLBACKCOMMAND = $1; } elsif ($linedata =~ /^autoreload\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "autoreload must be 'yes' or 'no'"); $AUTOCHECK = $1; } elsif ($linedata =~ /^callback\s*=\s*\"(.*)\"/) { $CALLBACK = $1; } elsif ($linedata =~ /^logfile\s*=\s*\"(.*)\"/) { my $tmpLDIRLOG = $LDIRLOG; $LDIRLOG = $1; if (&ld_openlog()) { $LDIRLOG = $tmpLDIRLOG; &config_error($line, "unable to open logfile: $1"); } } elsif ($linedata =~ /^execute\s*=\s*(.*)/) { $LD_INSTANCE{$1} = 1; } elsif ($linedata =~ /^fork\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "fork must be 'yes' or 'no'"); $FORKING = $1; } elsif ($linedata =~ /^supervised/) { if (($linedata =~ /^supervised\s*=\s*(.*)/) and ($1 eq "yes" || $1 eq "no")) { $SUPERVISED = $1; } elsif ($linedata =~ /^supervised\s*$/) { $SUPERVISED = "yes"; &config_warn($line, "please update your config not to " . "use a bare supervised directive"); } else { &config_error($line, "supervised must be 'yes' or 'no'"); } } elsif ($linedata =~ /^quiescent\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "quiescent must be 'yes' or 'no'"); $QUIESCENT = $1; } elsif ($linedata =~ /^readdquiescent\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "readdquiescent must be 'yes' or 'no'"); $READDQUIESCENT = $1; } elsif ($linedata =~ /^emailalert\s*=\s*(.*)/) { $EMAILALERT = read_emailalert($line, $1); } elsif ($linedata =~ /^emailalertfreq\s*=\s*(\d*)/) { $1 =~ /(\d+)/ or &config_error($line, "invalid email alert frequency"); $EMAILALERTFREQ = $1; } elsif ($linedata =~ /^emailalertstatus\s*=\s*(.*)/) { $EMAILALERTSTATUS = &parse_emailalertstatus($line, $1); } elsif ($linedata =~ /^emailalertfrom\s*=\s*(.*)/) { $1 =~ /(.+)/ or &config_error($line, "no email from address specified"); $EMAILALERTFROM = $1; } elsif ($linedata =~ /^cleanstop\s*=\s*(.*)/) { ($1 eq "yes" || $1 eq "no") or &config_error($line, "cleanstop must be 'yes' or 'no'"); $CLEANSTOP = $1; } elsif ($linedata =~ /^smtp\s*=\s*(.*)/) { $1 =~ /(^([0-9A-Za-z._+-]+))/ or &config_error($line, "invalid SMTP server address"); $SMTP = $1; } elsif ($linedata =~ /^maintenancedir\s*=\s*(.*)/) { $1 =~ /(.+)/ or &config_error($line, "maintenance directory not specified"); $MAINTDIR = $1; -d $MAINTDIR or &config_warn($line, "maintenance directory does not exist"); } else { if ($linedata =~ /^timeout\s*=\s*(.*)/) { &config_error($line, "timeout directive " . "deprecated in favour of " . "checktimeout and " . "negotiatetimeout"); } &config_error($line, "Unknown command $linedata "); } } close(CFGFILE); # Check for sensible use of checkinterval, warn if it is used in a virtual # service when fork=no if ($FORKING eq 'no') { foreach my $v (@VIRTUAL) { if (defined($$v{checkinterval})) { config_warn(-1, "checkinterval in virtual service ". get_virtual_id_str($v)." ignored when fork=no"); } } } return(0); } # _ld_read_config_virtual_resolve # Note: Should not need to be called directly, but won't do any damage if # you do. # Resolve the server (ip address) and port for a virtual service # pre: line: Line of configuration file fallback server was read from # Used for debugging messages # vsrv: Virtual Service to resolve server and port of # ip_port: server and port in the form # ip_address|hostname:port|service # af: Address family: AF_INET or AF_INET6 # post: Take ip_port, resolve it as per ld_gethostservbyname # and set $vsrv->{server} and $vsrv->{port} accordingly. # If $vsrv->{service} is not set, then set according to the value of # $vsrv->{port} # return: none # Debugging message will be reported and programme will exit # on error. sub _ld_read_config_virtual_resolve { my($line, $vsrv, $ip_port, $af)=(@_); if($ip_port){ $ip_port=&ld_gethostservbyname($ip_port, $vsrv->{protocol}, $af); if ($ip_port =~ /(\[[0-9A-Fa-f:]+\]):(\d+)/) { $vsrv->{server} = $1; $vsrv->{port} = $2; } elsif($ip_port){ ($vsrv->{server}, $vsrv->{port}) = split /:/, $ip_port; } else { &config_error($line, "invalid address for virtual service"); } if(!defined($vsrv->{service})){ $vsrv->{service} = ld_port_to_service($vsrv->{port}); } } } # ld_service_to_port # Resolve an ldirectord service name from its port number # pre: port: port number of the service # return: port name # "none" if the service is unknown sub ld_port_to_service { my ($port) = (@_); if ($port eq 21) { return "ftp"; } if ($port eq 25) { return "smtp"; } if ($port eq 53) { return "dns"; } if ($port eq 80) { return "http"; } if ($port eq 110) { return "pop"; } if ($port eq 119) { return "nntp"; } if ($port eq 143) { return "imap"; } if ($port eq 389) { return "ldap"; } if ($port eq 443) { return "https"; } if ($port eq 587) { return "submission"; } if ($port eq 636) { return "ldaps"; } if ($port eq 995) { return "pops"; } if ($port eq 993) { return "imaps"; } if ($port eq 1521) { return "oracle"; } if ($port eq 1812) { return "radius"; } if ($port eq 3128) { return "http_proxy"; } if ($port eq 3306) { return "mysql"; } if ($port eq 5060) { return "sip"; } if ($port eq 5432) { return "pgsql"; } return "none"; } # ld_service_to_port # Resolve the port number from an ldirectord service name # pre: service: name of the service # return: port number # undef if the service is unknown sub ld_service_to_port { my ($service) = (@_); if ($service eq "ftp") { return 21; } if ($service eq "smtp") { return 25; } if ($service eq "dns") { return 53; } if ($service eq "http") { return 80; } if ($service eq "pop") { return 110; } if ($service eq "nntp") { return 119; } if ($service eq "imap") { return 143; } if ($service eq "ldap") { return 389; } if ($service eq "https") { return 443; } if ($service eq "submission") { return 587; } if ($service eq "ldaps") { return 636; } if ($service eq "imaps") { return 993; } if ($service eq "pops") { return 995; } if ($service eq "oracle") { return 1521; } if ($service eq "radius") { return 1812; } if ($service eq "http_proxy") { return 3128; } if ($service eq "mysql") { return 3306; } if ($service eq "sip") { return 5060; } if ($service eq "pgsql") { return 5432; } return undef; } # ld_checkport # Resolve the port to connect to for service checks # Note: Should only be used inside service checks, # as its not the same as the port of the real server # pre: v: virtual service # r: real server # return: port number # undef if the service is unknown sub ld_checkport { my ($v, $r) = (@_); if (defined $v->{checkport}) { return $v->{checkport}; } if ($r->{port} > 0) { return $r->{port}; } return ld_service_to_port($v->{service}); } # _ld_read_config_fallback_resolve # Note: Should not need to be called directly, but won't do any damage if # you do. # Resolve the fallback server for a virtual service # pre: line: Line of configuration file fallback server was read from # Used for debugging messages # vsrv: Virtual Service to resolve fallback server of # af: Address family: AF_INET or AF_INET6 # post: Take $vsrv->{fallback}, resolve it as per ld_gethostservbyname # and set $vsrv->{fallback} to the result # return: none # Debugging message will be reported and programme will exit # on error. sub _ld_read_config_fallback_resolve { my($line, $protocol, $fallback, $af)=(@_); my ($ipversion, $ipaddress); unless($fallback) { return; } if ($af == AF_INET) { $ipversion = "IPv4"; } elsif ($af == AF_INET6) { $ipversion = "IPv6"; } else { $ipversion = "IP??($af)"; } unless ($ipaddress = &ld_gethostbyname($fallback->{server}, $af)) { &config_error($line, "invalid $ipversion address or could not resolve for fallback server: " . $fallback->{server}); } $fallback->{server} = $ipaddress; unless($fallback->{"port"}) { return; } $fallback->{port} = &ld_getservbyname($fallback->{port}, $protocol) or &config_error($line, "invalid port for fallback server"); } # _ld_read_config_real_resolve # Note: Should not need to be called directly, but won't do any damage if # you do. # Run through the list of real servers read in the configuration file for a # virtual server and parse these entries # pre: vsrv: Virtual Service to parse real servers for # rsrv_todo: List of real servers read from config but not parsed. # List is a list of list reference. The first element in # each list reference is the line read from the # configuration after "real=". The second element is the # line number, used for error reporting # af: Address family: AF_INET or AF_INET6 # post: Run through rsrv_todo and parse real servers # return: none # Debugging message will be reported and programme will exit # on error. sub _ld_read_config_real_resolve { my ($vsrv, $rsrv_todo, $af)=(@_); my $i; my $str; my $line; my $ip1; my $ip2; my $port; my $resolved_ip1; my $resolved_ip2; my $resolved_port; my $flags; for $i (@$rsrv_todo) { ($str, $line)=@$i; $str =~ /(\d+\.\d+\.\d+\.\d+|[A-Za-z0-9.-]+|\[[0-9A-fa-f:]+\])(->(\d+\.\d+\.\d+\.\d+|[A-Za-z0-9.-]+|\[[0-9A-fa-f:]+\]))?(:(\d+|[A-Za-z0-9-_]+))?\s+(.*)/ or &config_error($line, "invalid address for real server" . " (wrong format)"); $ip1=$1; $ip2=$3; if(defined($5)){ $port=$5; } else { $port="0"; } $flags=$6; $resolved_ip1=&ld_gethostbyname($ip1, $af); unless( defined($resolved_ip1) ) { &config_error($line, "invalid address ($ip1) for real server" . " (could not resolve host)"); } if( defined($port) ){ $resolved_port=&ld_getservbyname($port,""); unless( defined($resolved_port) ){ &config_error($line, "invalid port ($port) for real server" . " (could not resolve port)"); } } if ( defined ($ip2) ) { $resolved_ip2=&ld_gethostbyname($ip2, $af); unless( defined ($resolved_ip2) ) { &config_error($line, "invalid address ($ip2) for " . "real server" . " (could not resolve end host)"); } &add_real_server_range($line, $vsrv, $resolved_ip1, $resolved_ip2, $resolved_port, $flags, $af); } else { &add_real_server($line, $vsrv, $resolved_ip1, $resolved_port, $flags); } } } # add_real_server_range # Add a real server for each IP address in a range # pre: line: line number real server was read from # Used for debugging information # vsrv: virtual server to add real server to # first: First IP address in range # last: First IP address in range # port: Port of real servers # flags: Flags for real servers. Should be of the form # gate|masq|ipip [] [">I", ""] # af: Address family: AF_INET or AF_INET6 # post: real servers are added to virtual server # return: none # Debugging message will be reported and programme will exit # on error. sub add_real_server_range { my ($line, $vsrv, $first, $last, $port, $flags, $af) = (@_); my (@tmp, $first_i, $last_i, $i, $rsrv); if ($af == AF_INET) { if ( ($first_i=&ip_to_int($first)) <0 ) { &config_error($line, "Invalid IP address: $first"); } if ( ($last_i=&ip_to_int($last)) <0 ) { &config_error($line, "Invalid IP address: $last"); } if ($first_i>$last_i) { &config_error($line, "Invalid Range: $first-$last: First value must be " . "greater than or equal to the second value"); } # A for loop didn't seem to want to work $i=$first_i; while ( $i le $last_i ) { &add_real_server($line, $vsrv, &int_to_ip($i), $port, $flags); $i++; } } elsif ($af == AF_INET6) { # not supported yet &config_error($line, "Address range for IPv6 is not supported yet"); } else { die "address family must be AF_INET or AF_INET6\n"; } } # add_real_server # Add a real server to a virtual # pre: line: line number real server was read from # Used for debugging information # vsrv: virtual server to add real server to # ip: IP address of real server # port: Port of real server # flags: Flags for real server. Should be of the form # gate|masq|ipip [] [">I", "" ] [ "" ] [ "" ] # post: real server is added to virtual server # return: none # Debugging message will be reported and programme will exit # on error. sub add_real_server { my ($line, $vsrv, $ip, $port, $flags) = (@_); my $ref; my $realsrv=0; my $new_rsrv; my $rsrv; $new_rsrv = {"server"=>$ip, "port"=>$port, "failcount"=>0}; $flags =~ /(\w+)(.*)/ && ($1 eq "gate" || $1 eq "masq" || $1 eq "ipip") or &config_error($line, "forward method must be gate, masq or ipip"); $new_rsrv->{"forward"} =$1; $flags = $2; $rsrv=$vsrv->{"real"}; if(defined($flags) and $flags =~ /\s+(\d+)(.*)/) { $new_rsrv->{"weight"} = $1; $flags = $2; } else { $new_rsrv->{"weight"} = 1; } if(defined($flags) and $flags =~ /\s+\"(.*)\"[, ]\s*\"(.*)\"(.*)/) { $new_rsrv->{"request"} = $1; unless ($new_rsrv->{request}=~/^\//) { $new_rsrv->{request} = "/" . $new_rsrv->{request}; } $new_rsrv->{"receive"} = $2; $flags = $3; } - #threshold + #threshold #"" if(defined($flags) and $flags =~ /\s+l:(\d+)(.*)/) { $new_rsrv->{"l-threshold"} = $1; $flags = $2; } #"" if(defined($flags) and $flags =~ /\s+u:(\d+)(.*)/) { $new_rsrv->{"u-threshold"} = $1; $flags = $2; } if (defined($flags) and $flags =~/\S/) { &config_error($line, "Invalid real server line, around " . "\"$flags\""); } push(@$rsrv, $new_rsrv); my $real = get_real_id_str($new_rsrv, $vsrv); my $virtual = get_virtual_id_str($vsrv); for my $r (@REAL){ if($r->{"real"} eq $real){ my $ref=$r->{"virtual"}; push(@$ref, $virtual); $realsrv=1; last; } } if($realsrv==0){ push(@REAL, { "real"=>$real, "virtual"=>[ $virtual ] }); } } # parse_fallback # Parse a fallback server # pre: line: line number real server was read from # fallback: line read from configuration file # Should be of the form # ip_address|hostname[:port|:service_name] [gate|masq|ipip] # post: fallback is parsed # return: Reference to hash of the form # { server => blah, forward => blah } # Debugging message will be reported and programme will exit # on error. sub parse_fallback { my ($line, $fallback, $vsrv) = (@_); my $parse_line; my $server; my $port; my $fwd; $parse_line = $fallback; if ($parse_line =~ /(\S+)(\s+(\S+))?\s*$/) { # get "ip:port" and a forwarding method $fwd = $3; $parse_line = $1; } if ($parse_line =~ /(:(\d+|[A-Za-z0-9-_]+))?$/) { # get host and port $port=$2; $parse_line =~ s/(:(\d+|[A-Za-z0-9-_]+))?$//; $server = $parse_line; } unless(defined($server)) { &config_error($line, "invalid fallback server: $fallback"); } if (not defined($port) and defined($vsrv)) { $port = $vsrv->{"port"}; } if($fwd) { ($fwd eq "gate" || $fwd eq "masq" || $fwd eq "ipip") or &config_error($line, "forward method must be gate, masq or ipip"); } else { $fwd="gate" } return({"server"=>$server, "port"=>$port, "forward"=>$fwd, "l-threshold"=>0,"u-threshold"=>0, "weight"=>1}); } sub __config_log { my ($line, $prefix, $msg) = @_; chomp($msg); $msg .= "\n"; my $msg_prefix = "$prefix [$$]"; if ($line > 0) { $msg_prefix .= " reading file $CONFIG at line $line"; } $msg = "$msg_prefix: $msg"; if ($opt_d or $DAEMON_STATUS == $DAEMON_STATUS_STARTING) { print STDERR $msg; } else { &ld_log("$msg"); } } sub config_warn { my ($line, $msg) = @_; __config_log($line, "Warning", $msg); } sub config_error { my ($line, $msg) = @_; __config_log($line, "Error", $msg); if ($DAEMON_STATUS == $DAEMON_STATUS_STARTING) { &ld_rm_file("$RUNPID.$CFGNAME.pid"); &ld_exit(2, "config_error: Configuration Error"); } else { die; } } sub ld_setup { for my $v (@VIRTUAL) { if ($$v{protocol} eq "tcp") { $$v{proto} = "-t"; } elsif ($$v{protocol} eq "udp") { $$v{proto} = "-u"; } elsif ($$v{protocol} eq "fwm") { $$v{proto} = "-f"; } $$v{flags} = "$$v{proto} " . &get_virtual_option($v) . " "; if ($$v{protocol} eq "udp" && $$v{ops} eq "yes") { $$v{flags} .= "-o "; } $$v{flags} .= "-s $$v{scheduler} " if defined ($$v{scheduler}); if (defined $$v{persistent}) { $$v{flags} .= "-p $$v{persistent} "; $$v{flags} .= "-M $$v{netmask} " if defined ($$v{netmask}); } if (defined $$v{schedflags}) { $$v{flags} .= "-b $$v{schedflags} "; } my $real = $$v{real}; for my $r (@$real) { $$r{forw} = get_forward_flag($$r{forward}); my $port=ld_checkport($v, $r); my $schema = $$v{service}; if ($$v{service} eq 'http_proxy') { $schema = 'http'; } if (defined $$r{request} && defined $$r{receive}) { my $uri = $$r{request}; $uri =~ s/^\///g; if ($$r{request} =~ /$schema:\/\//) { $$r{url} = "$uri"; } else { $$r{url} = "$schema:\/\/$$r{server}:$port\/$uri"; } } else { my $uri = $$v{request}; $uri =~ s/^\///g; if ($$v{service} eq 'http_proxy') { $$r{url} = "$uri"; } else { $$r{url} = "$schema:\/\/$$r{server}:$port\/$uri"; } $$r{request} = $$v{request} unless defined $$r{request}; $$r{receive} = $$v{receive}; } if ($$v{checktype} eq "combined") { $$r{num_connects} = 999999; } else { $$r{num_connects} = -1; } } # checktimeout and negotiate timeout are # mutual defaults for each other, so calculate # checktimeout in a temporary variable so as not # to affect the calculation of negotiatetimeout. my $checktimeout = $$v{checktimeout}; if ($checktimeout < 0) { $checktimeout = $$v{negotiatetimeout}; } if ($checktimeout < 0) { $checktimeout = $CHECKTIMEOUT; } if ($checktimeout < 0) { $checktimeout = $NEGOTIATETIMEOUT; } if ($checktimeout < 0) { $checktimeout = $DEFAULT_CHECKTIMEOUT; } if ($$v{negotiatetimeout} < 0) { $$v{negotiatetimeout} = $$v{checktimeout}; } if ($$v{negotiatetimeout} < 0) { $$v{negotiatetimeout} = $NEGOTIATETIMEOUT; } if ($$v{negotiatetimeout} < 0) { $$v{negotiatetimeout} = $CHECKTIMEOUT; } if ($$v{negotiatetimeout} < 0) { $$v{negotiatetimeout} = $DEFAULT_NEGOTIATETIMEOUT; } $$v{checktimeout} = $checktimeout; if ($$v{checkcount} < 0) { $$v{checkcount} = $CHECKCOUNT; } if ($$v{failurecount} < 0) { $$v{failurecount} = $FAILURECOUNT; } } } # ld_read_ipvsadm # # Net::FTP seems to set the input record separator ($\) to null # putting IO into slurp (whole file at a time, rather than line at a time) # mode. Net::FTP does this using local $\, which should mean # that the change doesn' effect code here, but it does. It also # seems to be impossible to turn it off, by say setting $\ back to '\n' # Perhaps there is more to this than meets the eye. Perhaps it's a perl bug. # In any case, this should fix the problem. # # This should not affect pid or config file parsing as they are called # before Net::FTP and as this appears to be a bit of a work around, # I'd rather use it in as few places as possible # # Observed with perl v5.8.8 (Debian's perl 5.8.8-6) # -- Horms, 17th July 2005 sub ld_readline { my ($fd, $buf) = (@_); my $line; # Uncomment the following line to turn off this work around # return readline($fd); $line = shift @$buf; if (defined $line) { return $line . "\n"; } push @$buf, split /\n/, readline($fd); $line = shift @$buf; if (defined $line) { return $line . "\n"; } return undef; } # ld_read_ipvsadm # Parses the output of "ipvsadm -L -n" and puts into a structure of # the following from: # # { # (vip_address:vport|fwmark) protocol => { # "scheduler" => scheduler, # "persistent" => timeout, # May be omitted # "netmask" => netmask, # May be omitted # "real" => { # rip_address:rport => { # "forward" => forwarding_mechanism, # "weight" => weight # }, # ... # } # }, # ... # } # # where: # vip_address: IP address of virtual service # vport: Port of virtual service # fwmark: Firewall Mark of virtual service # scheduler: Scheduler for virtual service # timeout: Timeout for persistency. Omitted if service is not persistent. # nemask: Netmask for persistency. Omitted if service is not persistent. # # rip_address: IP address of real server # rport: Port of real server # forwarding_mechanism: Forwarding mechanism for real server. # One of: gate, ipip, masq. # weight: Weight of real server # # pre: none # post: ipvsadm -L -n is parsed # result: reference to sructure detailed above. sub ld_read_ipvsadm { my %oldsrv; my $real_service; my $fwd; my $buf = []; my $fh; my $line; # read status of current ipvsadm -L -n unless(open($fh, "$IPVSADM -L -n 2>&1|")){ &ld_exit(1, "Could not run $IPVSADM -L -n: $!"); } # Skip the first three lines $line = ld_readline($fh, $buf); $line = ld_readline($fh, $buf); $line = ld_readline($fh, $buf); while (1) { $line = ld_readline($fh, $buf); if (not defined $line) { last; } if ($line =~ /^(\w+)\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+|\d+)( IPv6)?\s+(\w+)\s+persistent\s+(\d+)\s+mask\s+(.*)/) { $real_service = &gen_real_service_str($2, $1, $3); $oldsrv{"$real_service"} = {"real"=>{}, "scheduler"=>$4, "persistent"=>$5, "netmask"=>$6}; } elsif ($line =~ /^(\w+)\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+|\d+)( IPv6)?\s+(\w+)\s+persistent\s+(\d+)/) { $real_service = &gen_real_service_str($2, $1, $3); $oldsrv{"$real_service"} = {"real"=>{}, "scheduler"=>$4, "persistent"=>$5}; } elsif ($line =~ /^(\w+)\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+|\d+)( IPv6)?\s+(\w+)/) { $real_service = &gen_real_service_str($2, $1, $3); $oldsrv{"$real_service"} = {"real"=>{}, "scheduler"=>$4}; } elsif ($line =~ /^ ->\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+)\s+(\w+)\s+(\d+)/) { if (not defined( $real_service)) { &ld_debug(2, "Real server read from ipvsadm " . "doesn't seem to be inside a " . "virtual service: \"$line\"\n"); next; } if ($2 eq "Route") { $fwd = "gate"; } elsif ($2 eq "Tunnel") { $fwd = "ipip"; } elsif ($2 eq "Masq") { $fwd = "masq"; } $oldsrv{"$real_service"}->{"real"}->{"$1"} = {"forward"=>$fwd, "weight"=>$3}; } else { &ld_debug(2, "Unknown line read from ipvsadm: " . "\"$line\"\n"); next; } } close($fh); ld_read_ipvsadm_thresholds(\%oldsrv); return(\%oldsrv); } # Parses the output of "ipvsadm -L -n --thresholds" and adds thresholds value to # real servers in the structure is being returned from ld_read_ipvsadm (merely derived from it) # this is needed because ipvsadm -Ln --thresholds replace Forward column # { # (vip_address:vport|fwmark) protocol => { # "scheduler" => scheduler, # "persistent" => timeout, # May be omitted # "netmask" => netmask, # May be omitted # "real" => { # rip_address:rport => { # "forward" => forwarding_mechanism, # "weight" => weight # "l-threshold" => l-threshold # "u-threshold" => u-threshold # }, # ... # } # }, # ... # } sub ld_read_ipvsadm_thresholds { my ($oldsrv) = @_; my $real_service; my $buf = []; my $fh; my $line; unless(open($fh, "$IPVSADM -L -n --thresholds 2>&1|")){ &ld_exit(1, "Could not run $IPVSADM -L -n: $!"); } # Skip the first three lines $line = ld_readline($fh, $buf); $line = ld_readline($fh, $buf); $line = ld_readline($fh, $buf); while (1) { $line = ld_readline($fh, $buf); if (not defined $line) { last; } #here we just want to know the real service if ($line =~ /^(\w+)\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+|\d+)( IPv6)?\s+(\w+)\s+persistent\s+(\d+)\s+mask\s+(.*)/) { $real_service = &gen_real_service_str($2, $1, $3); } elsif ($line =~ /^(\w+)\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+|\d+)( IPv6)?\s+(\w+)\s+persistent\s+(\d+)/) { $real_service = &gen_real_service_str($2, $1, $3); } elsif ($line =~ /^(\w+)\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+|\d+)( IPv6)?\s+(\w+)/) { $real_service = &gen_real_service_str($2, $1, $3); } elsif ($line =~ /^ ->\s+(\d+\.\d+\.\d+\.\d+\:\d+|\[[0-9A-Fa-f:]+\]:\d+)\s+(\d+)\s+(\d+)\s+(\d+)/) { if (not defined( $real_service)) { &ld_debug(2, "Real server read from ipvsadm " . "doesn't seem to be inside a " . "virtual service: \"$line\"\n"); next; } $oldsrv->{"$real_service"}->{"real"}->{"$1"}->{"u-threshold"}=$2; $oldsrv->{"$real_service"}->{"real"}->{"$1"}->{"l-threshold"}=$3; } else { &ld_debug(2, "Unknown line read from ipvsadm: " . "\"$line\"\n"); next; } } } #threshold sub gen_real_service_str { my ($service_address, $protocol, $v6flag) = @_; return "$service_address ".lc($protocol).(defined($v6flag) ? "6" : ""); } sub get_real_service_str { my ($v) = (@_); if ($v->{"protocol"} eq "fwm") { return &get_virtual($v) . " " . $v->{protocol} . (($v->{addressfamily} == AF_INET6) ? "6" : ""); } else { return &get_virtual($v) . " " . $v->{protocol}; } } sub ld_start { my $oldsrv; my $real_service; my $nv; my $nr; my $server_down = {}; # read status of current ipvsadm -L -n $oldsrv=&ld_read_ipvsadm(); # make sure virtual servers are up to date foreach $nv (@VIRTUAL) { my $real_service = &get_real_service_str($nv); if (exists($oldsrv->{"$real_service"})) { # service exists, modify it &system_wrapper("$IPVSADM -E $$nv{flags}"); &ld_log("Changed virtual server: " . &get_virtual($nv)); } else { # no such service, create a new one &system_wrapper("$IPVSADM -A $$nv{flags}"); &ld_log("Added virtual server: " . &get_virtual($nv)); } } # make sure real servers are up to date foreach $nv (@VIRTUAL) { my $nreal = $nv->{real}; my $ov = $oldsrv->{&get_real_service_str($nv)}; my $or = $ov->{real}; my $fallback = fallback_find($nv); if (defined($fallback)) { delete($or->{"$fallback->{server}:$fallback->{port}"}); } for $nr (@$nreal) { my $real_str = "$nr->{server}:$nr->{port}"; if (! defined($or->{$real_str}) or $or->{$real_str}->{weight} == 0) { $server_down->{$real_str} = [$nv, $nr]; #service_set($nv, $nr, "down", {force => 1}); } else { if (defined $server_down->{$real_str}) { delete($server_down->{$real_str}); } service_set($nv, $nr, "up", {force => 1}); } delete($or->{$real_str}); } # remove remaining entries for real servers for my $k (keys %$or) { purge_untracked_service($nv, $k, "start"); delete($$or{$k}); } delete($oldsrv->{&get_real_service_str($nv)}); &fallback_on($nv); } for my $k (keys (%$server_down)) { my $v = $server_down->{$k}; if ($READDQUIESCENT eq "no") { # Ensure that the server is initially added service_set(@$v[0], @$v[1], "up", {force => 1}); } # Remove Server service_set(@$v[0], @$v[1], "down", {force => 1}); delete($server_down->{$k}); #sleep 5; } # remove remaining entries for virtual servers foreach $nv (@OLDVIRTUAL) { if (! defined($oldsrv->{&get_real_service_str($nv)})) { next; } purge_virtual($nv, "start"); } # initial check of all real servers while we are still starting up so # any e-mail notifications sent out are in 'starting' daemon status. _ld_main_check_all(); } sub ld_cmd_children { my ($cmd, %children) = (@_); # instantiate other ldirectord, if specified my $child; foreach $child (keys %children) { if ($cmd eq "reload_or_start") { if (&system_wrapper("$LDIRECTORD $child reload")) { &system_wrapper("$LDIRECTORD $child start"); } } else { &system_wrapper("$LDIRECTORD $child $cmd"); } } } sub ld_stop { # Kill children if ($FORKING eq 'yes') { foreach my $virtual_id (keys (%FORK_CHILDREN)) { my $pid = $FORK_CHILDREN{$virtual_id}; ld_log("Killing child $virtual_id PID=$pid"); kill 15, $pid; } } foreach my $v (@VIRTUAL) { next if ( (! defined($$v{cleanstop}) and $CLEANSTOP eq 'no') or (defined($$v{cleanstop}) and $$v{cleanstop} eq 'no') ); my $real = $$v{real}; foreach my $r (@$real) { if (defined $$r{virtual_status}) { purge_service($v, $r, "stop"); } } purge_virtual($v, "stop"); } } sub ld_main { # Main failover checking code while (1) { if ($FORKING eq 'yes') { foreach my $v (@VIRTUAL) { my $virtual_id = get_virtual_id_str($v); if (!exists($FORK_CHILDREN{$virtual_id})) { &ld_log("Child not running for $virtual_id, spawning"); my $pid = fork; if (!defined($pid)) { &ld_log("fork failed"); } elsif ($pid == 0) { run_child($v); } else { $FORK_CHILDREN{get_virtual_id_str($v)} = $pid; &ld_log("Spawned child $virtual_id PID=$pid"); } } elsif (waitpid($FORK_CHILDREN{get_virtual_id_str($v)}, WNOHANG)) { delete $FORK_CHILDREN{get_virtual_id_str($v)}; } } check_signal(); if (!check_cfgfile()) { sleep 1; } check_signal(); } else { _ld_main_check_all(); check_signal(); if (!check_cfgfile()) { sleep $CHECKINTERVAL; } check_signal(); ld_emailalert_resend(); check_signal(); } } } sub run_child { my $v = shift; # Just exit on signals $SIG{'INT'} = "DEFAULT"; $SIG{'QUIT'} = "DEFAULT"; $SIG{'ILL'} = "DEFAULT"; $SIG{'ABRT'} = "DEFAULT"; $SIG{'FPE'} = "DEFAULT"; $SIG{'SEGV'} = "DEFAULT"; $SIG{'TERM'} = "DEFAULT"; $SIG{'BUS'} = "DEFAULT"; $SIG{'SYS'} = "DEFAULT"; $SIG{'XCPU'} = "DEFAULT"; $SIG{'XFSZ'} = "DEFAULT"; $SIG{'IOT'} = "DEFAULT"; $SIG{'PIPE'} = "IGNORE"; $SIG{'HUP'} = sub { exit 1 }; my $real = $$v{real}; my $virtual_id = get_virtual_id_str($v); my $checkinterval = $$v{checkinterval} || $CHECKINTERVAL; # delete any entries in EMAILSTATUS as we can't trust what has been # set in the parent in the past. %EMAILSTATUS = (); $0 = "ldirectord $virtual_id"; while (1) { foreach my $r (@$real) { $0 = "ldirectord $virtual_id checking $$r{server}"; _check_real($v, $r); } $0 = "ldirectord $virtual_id"; sleep $checkinterval; ld_emailalert_resend(); } } # run checks for everything sub _ld_main_check_all { my @real_checked; foreach my $v (@VIRTUAL) { my $real = $$v{real}; my $virtual_id = get_virtual_id_str($v); REAL: foreach my $r (@$real) { my $real_id = get_real_id_str($r, $v); check_signal(); foreach my $tmp_id (@real_checked) { if($real_id eq $tmp_id) { &ld_debug(3, "Already checked: real server=$real_id (virtual=$virtual_id)"); next REAL; } } _check_real($v, $r); push(@real_checked, $real_id); } } } sub _check_real { my $v = shift; my $r = shift; my $real_id = get_real_id_str($r, $v); my $virtual_id = get_virtual_id_str($v); if (_check_real_for_maintenance($r)) { service_set($v, $r, "down", {do_log => 1, force => 1}, "Server in maintenance"); return; } elsif ($$v{checktype} eq "negotiate" || $$r{num_connects}>=$$v{num_connects}) { &ld_debug(2, "Checking negotiate: real server=$real_id (virtual=$virtual_id)"); if (grep $$v{service} eq $_, ("http", "https", "http_proxy")) { $$r{num_connects} = 0 if (check_http($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "pop") { $$r{num_connects} = 0 if (check_pop($v, $r, 0) == $SERVICE_UP); } elsif ($$v{service} eq "pops") { $$r{num_connects} = 0 if (check_pop($v, $r, 1) == $SERVICE_UP); } elsif ($$v{service} eq "imap") { $$r{num_connects} = 0 if (check_imap($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "imaps") { $$r{num_connects} = 0 if (check_imaps($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "smtp" or $$v{service} eq "submission") { $$r{num_connects} = 0 if (check_smtp($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "ftp") { $$r{num_connects} = 0 if (check_ftp($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "ldap") { $$r{num_connects} = 0 if (check_ldap($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "ldaps") { $$r{num_connects} = 0 if (check_ldap($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "nntp") { $$r{num_connects} = 0 if (check_nntp($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "dns") { $$r{num_connects} = 0 if (check_dns($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "sip") { $$r{num_connects} = 0 if (check_sip($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "radius") { $$r{num_connects} = 0 if (check_radius($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "mysql") { $$r{num_connects} = 0 if (check_mysql($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "pgsql") { $$r{num_connects} = 0 if (check_pgsql($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "oracle") { $$r{num_connects} = 0 if (check_oracle($v, $r) == $SERVICE_UP); } elsif ($$v{service} eq "simpletcp") { $$r{num_connects} = 0 if (check_simpletcp($v, $r) == $SERVICE_UP); } else { $$r{num_connects} = 0 if (check_none($v, $r) == $SERVICE_UP); } } elsif ($$v{checktype} eq "connect") { if ($$v{protocol} ne "udp") { &ld_debug(2, "Checking connect: real server=$real_id (virtual=$virtual_id)"); check_connect($v, $r); } else { &ld_debug(2, "Checking connect (ping): real server=$real_id (virtual=$virtual_id)"); check_ping($v, $r); } } elsif ($$v{checktype} eq "ping") { &ld_debug(2, "Checking ping: real server=$real_id (virtual=$virtual_id)"); check_ping($v, $r); } elsif ($$v{checktype} eq "external") { &ld_debug(2, "Checking external: real server=$real_id (virtual=$virtual_id)"); check_external($v, $r); } elsif ($$v{checktype} eq "external-perl") { &ld_debug(2, "Checking external-perl: real server=$real_id (virtual=$virtual_id)"); check_external_perl($v, $r); } elsif ($$v{checktype} eq "off") { &ld_debug(2, "Checking off: No real or fallback servers to be added\n"); } elsif ($$v{checktype} eq "on") { &ld_debug(2, "Checking on: Real servers are added without any checks\n"); &service_set($v, $r, "up"); } elsif ($$v{checktype} eq "combined") { &ld_debug(2, "Checking combined-connect: real server=$real_id (virtual=$virtual_id)"); if (check_connect($v, $r) == $SERVICE_UP) { $$r{num_connects}++; } else { $$r{num_connects} = 999999; } } } sub _check_real_for_maintenance { my $r = shift; return undef if(!$MAINTDIR); my $servername = ld_gethostbyaddr($$r{server}); # Extract just the first component of the full name so we can match short or FQDN names $servername =~ /^([a-z][a-z0-9\-]+)\./; my $servershortname = $1; if (-e "$MAINTDIR/$$r{server}:$$r{port}") { &ld_debug(2, "Server maintenance: Found file $$r{server}:$$r{port}"); return 1; } elsif (-e "$MAINTDIR/$$r{server}") { &ld_debug(2, "Server maintenance: Found file $$r{server}"); return 1; } elsif ($servername && -e "$MAINTDIR/$servername:$$r{port}") { &ld_debug(2, "Server maintenance: Found file $servername:$$r{port}"); return 1; } elsif ($servername && -e "$MAINTDIR/$servername") { &ld_debug(2, "Server maintenance: Found file $servername"); return 1; } elsif ($servershortname && -e "$MAINTDIR/$servershortname:$$r{port}") { &ld_debug(2, "Server maintenance: Found file $servershortname:$$r{port}"); return 1; } elsif ($servershortname && -e "$MAINTDIR/$servershortname") { &ld_debug(2, "Server maintenance: Found file $servershortname"); return 1; } return undef; } sub check_http { use LWP::UserAgent; use LWP::Debug; use Net::HTTP; use URI; if($DEBUG > 2) { LWP::Debug::level('+'); } my ($v, $r) = @_; my $host = $$r{server}; my $virtualhost = (defined $$v{virtualhost} ? $$v{virtualhost} : $host); &ld_debug(2, "check_http: url=\"$$r{url}\" " . "virtualhost=\"$virtualhost\""); if (inet_pton(AF_INET6,&ld_strip_brackets($host))) { require Net::INET6Glue::INET_is_INET6; } # Workaround for Net-HTTP IPv6 Address URLs Broken if ($LWP::VERSION < 6.08 || $Net::HTTP::VERSION < 6.07 || $URI::VERSION < 1.64) { no warnings 'once'; @LWP::Protocol::http::EXTRA_SOCK_OPTS = (PeerAddr => $host, PeerHost => &ld_strip_brackets($host), Host => &ld_strip_brackets($host)); } my $ua = new LWP::UserAgent(ssl_opts => { verify_hostname => 0 }); my $h = undef; if ($$v{service} eq "http_proxy") { my $port = ld_checkport($v, $r); $ua->proxy("http", "http://$$r{server}:$port/"); } else { $h = new HTTP::Headers("Host" => $virtualhost); } my $req = new HTTP::Request("$$v{httpmethod}", "$$r{url}", $h); my $res; # LWP does not seem to honour timeouts set using $ua->timeout() # for HTTPS. So use an alarm instead. This also has the advantage # of being cumulative timeout, rather than a per send/receive # timeout. eval { # LWP makes unguarded calls to eval # which throw a fatal exception if they fail # Needless to say, this is completely stupid. # Resetting of $SIG{'__DIE__'} is also # needed now that alarm() is used. local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{negotiatetimeout}"); &ld_debug(2, "Starting Check"); alarm $$v{negotiatetimeout}; &ld_debug(2, "Starting HTTP/HTTPS"); $res = $ua->request($req); &ld_debug(2, "Finished HTTP/HTTPS"); alarm 0; # Cancel the alarm }; if (not defined $res) { &ld_debug(2, "check_http: timeout"); goto down; } if ($$v{service} eq "https") { &ld_debug(2, "SSL-Cipher: " . ($res->header('Client-SSL-Cipher') || '')); &ld_debug(2, "SSL-Cert-Subject: " . ($res->header('Client-SSL-Cert-Subject') || '')); &ld_debug(2, "SSL-Cert-Issuer: " . ($res->header('Client-SSL-Cert-Issuer') || '')); } &ld_debug(2, "Return status: " . $res->status_line); my $recstr = $$r{receive}; if ($res->is_success && (!($recstr =~ /.+/) || $res->content =~ /$recstr/)) { service_set($v, $r, "up", {do_log => 1}, $res->status_line); &ld_debug(2, "check_http: $$r{url} is up\n"); return $SERVICE_UP; } my $log_message = $res->is_success ? $res->content : $res->status_line; service_set($v, $r, "down", {do_log => 1}, $log_message); &ld_debug(3, "Headers " . $res->headers->as_string); down: &ld_debug(2, "check_http: $$r{url} is down\n"); return $SERVICE_DOWN; } sub check_smtp { require Net::SMTP; my ($v, $r) = @_; my $port = ld_checkport($v, $r); &ld_debug(2, "Checking $$v{service}: server=$$r{server} port=$port"); my $smtp = new Net::SMTP($$r{server}, Port => $port, Timeout => $$v{negotiatetimeout}); if ($smtp) { $smtp->quit; service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } else { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } } sub check_pop { require Mail::POP3Client; my ($v, $r, $ssl) = @_; my $port = ld_checkport($v, $r); &ld_debug(2, "Checking POP3 server=$$r{server} port=$port ssl=$ssl"); my $pop = new Mail::POP3Client(USER => $$v{login}, PASSWORD => $$v{passwd}, HOST => $$r{server}, USESSL => $ssl, PORT => $port, DEBUG => 0, TIMEOUT => $$v{negotiatetimeout}); if (!$pop) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } if($$v{login} ne "") { my $authres = $pop->login(); $pop->close(); if (!$authres) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } } $pop->close(); service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } sub check_imap { require Net::IMAP::Simple; my ($v, $r) = @_; my $port = ld_checkport($v, $r); &ld_debug(2, "Checking IMAP server=$$r{server} port=$port"); my $imap = Net::IMAP::Simple->new($$r{server}, port => $port, timeout => $$v{negotiatetimeout}); if (!$imap) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } if($$v{login} ne "") { my $authres = $imap->login($$v{login},$$v{passwd}); $imap->quit; if (!$authres) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } } $imap->quit(); service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } sub check_imaps { require Net::IMAP::Simple::SSL; my ($v, $r) = @_; my $port = ld_checkport($v, $r); &ld_debug(2, "Checking IMAPS server=$$r{server} port=$port"); my $imaps = Net::IMAP::Simple::SSL->new($$r{server}, port => $port, timeout => $$v{negotiatetimeout}); if (!$imaps) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } if($$v{login} ne "") { my $authres = $imaps->login($$v{login},$$v{passwd}); $imaps->quit; if (!$authres) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } } $imaps->quit(); service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } sub check_ldap { my ($v, $r) = @_; require Net::LDAP; my $port = ld_checkport($v, $r); my $result; my $recstr = $$r{receive}; my $scheme = $$v{service}; &ld_debug(2, "Checking LDAP server=$$r{server} port=$port scheme=$scheme"); eval { local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{checktimeout}"); &ld_debug(2, "Starting Check"); alarm $$v{checktimeout}; my $ldap = Net::LDAP->new("$$r{server}", port => $port, scheme => $scheme, timeout => $$v{negotiatetimeout}); if(!$ldap) { service_set($v, $r, "down", {do_log => 1}, "Connection failed"); &ld_debug(4, "Connection failed"); alarm 0; # Cancel the alarm return $SERVICE_DOWN; } my $mesg; if ($$v{login} && $$v{passwd}) { $mesg = $ldap->bind($$v{login}, password=>$$v{passwd}) ; } else { $mesg = $ldap->bind ; } if ($mesg->is_error) { service_set($v, $r, "down", {do_log => 1}, "Bind failed"); &ld_debug(4, "Bind failed"); alarm 0; # Cancel the alarm return $SERVICE_DOWN; } &ld_debug(4, "Base : " . substr($$r{request},1)); $result = $ldap->search ( base => substr($$r{request},1) . "", scope => "base", filter => "(objectClass=*)" ); alarm 0; # Cancel the alarm }; if (!defined($result)) { service_set($v, $r, "down", {do_log => 1}, "No answer received"); &ld_debug(2, "check timeout alarm"); return $SERVICE_DOWN; } if($result->count != 1) { service_set($v, $r, "down", {do_log => 1}, "No answer received"); &ld_debug(2, "Count failed : " . $result->count); return $SERVICE_DOWN; } my $href = $result->as_struct; my @arrayOfDNs = keys %$href ; if (!($recstr =~ /.+/) || $arrayOfDNs[0] =~ /$recstr/) { service_set($v, $r, "up", {do_log => 1}, "Success"); return $SERVICE_UP; } else { service_set($v, $r, "down", {do_log => 1}, "Response mismatch"); &ld_debug(4,"Message differs : " . ", " . $$r{receive} . ", " . $arrayOfDNs[0] . "."); return $SERVICE_DOWN; } } sub check_nntp { use IO::Socket; use IO::Socket::INET6; use IO::Select; my ($v, $r) = @_; my $sock; my $s; my $buf; my $port = ld_checkport($v, $r); my $status = 1; &ld_debug(2, "Checking NNTP server=$$r{server} port=$port"); unless ($sock = IO::Socket::INET6->new(PeerAddr => $$r{server}, PeerPort => $port, Proto => 'tcp', TimeOut => $$v{negotiatetimeout})) { service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } $s = IO::Select->new(); $s->add($sock); if (scalar($s->can_read($$v{negotiatetimeout})) == 0) { service_set($v, $r, "down", {do_log => 1}); } else { sysread($sock, $buf, 64); if ($buf =~ /^2/) { service_set($v, $r, "up", {do_log => 1}); $status = 0; } else { service_set($v, $r, "down", {do_log => 1}); } } $s->remove($sock); $sock->close; return $status; } sub check_radius { require Authen::Radius; my ($v, $r) = @_; &ld_debug(2, "Checking RADIUS"); my $port = ld_checkport($v, $r); my $radius; my $result = ""; eval { local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{checktimeout}"); &ld_debug(2, "Starting Check"); alarm $$v{checktimeout}; &ld_debug(2, "Starting RADIUS"); $radius = new Authen::Radius(Host => "$$r{server}:$port", Secret=>$$v{secret}, TimeOut=>$$v{negotiatetimeout}, Errmode=>'die'); $result = $radius->check_pwd($$v{login}, $$v{passwd}); &ld_debug(2, "Finished RADIUS"); alarm 0; # Cancel the alarm }; if ($result eq "") { &service_set($v, $r, "down", {do_log => 1}); &ld_debug(3, "Deactivated service $$r{server}:$$r{port}: $@"); &ld_debug(3, "RADIUS Error: ".$radius->get_error); return $SERVICE_DOWN; } else { &service_set($v, $r, "up", {do_log => 1}); &ld_debug(3, "Activated service $$r{server}:$$r{port}"); return $SERVICE_UP; } } sub check_mysql { return check_sql(@_, "mysql", "database"); } sub check_pgsql { return check_sql(@_, "Pg", "dbname"); } sub check_sql_log_errstr { my ($prefix, $errstr) = (@_); for $_ (split /\n/, $errstr) { &ld_debug(4, "$prefix $_\n"); } } sub check_oracle { return check_sql(@_, "Oracle", "sid"); } sub check_sql { require DBI; my ($v, $r, $dbd, $dbname) = @_; my $port = ld_checkport($v, $r); my ($dbh, $sth, $query, $rows, $result); $result = $SERVICE_DOWN; $query = $$r{request}; $query =~ s#^/##; unless ($$v{login} && $query) { &ld_log("Error: Must specify a login and request string " . "for MySQL, Oracle and PostgreSQL checks. " . "Not adding $$r{server}.\n"); goto err_down; } $result=2; # Set result flag. Only ok if ends up at zero. &ld_debug(2, "Checking $$v{server} server=$$r{server} port=$port\n"); $dbh = DBI->connect("dbi:$dbd:$dbname=$$v{database};" . "host=$$r{server};port=$port", $$v{login}, $$v{passwd}); unless ($dbh) { &ld_debug(2, "Failed to bind to $$r{server} with DBI->errstr\n"); check_sql_log_errstr("Failed to bind to $$r{server} with", DBI->errstr); goto err_down; } $result--; $sth = $dbh->prepare($query); unless ($sth) { &ld_debug(2, "Error preparing statement: $dbh->errstr\n"); check_sql_log_errstr("Error preparing statement:", $dbh->errstr); goto err_disconect; } # Test to see if any errors are returned $sth->execute; if ($dbh->err) { &ld_debug(2, "Error executing statement: $dbh->errstr : $dbh->err\n"); check_sql_log_errstr("Error executing statement:", $dbh->errstr, $dbh->err); goto err_finish; } # On error "execute" will return undef. # # Assuming you're using 'SELECT' you will get the number of rows # returned from the db when running execute: the 'rows' method is # only used when doing something that is NOT a select. I cannot # imagine that you would ever want to insert or update from a # regular polling on this system, so we will assume you are using # SELECT here. # # Ideally you will do something like this: 'select * from # director_slave where enabled=1' This way you can have, say, a # MEMORY table in MySQL where you insert a value into a row # (enabled) that says whether or not you want to actually use this # in the pool from ldirector / ipvs, and disable them without # actually turning off your sql server. $sth->execute; if ($dbd eq "Oracle") { $sth->fetchrow_hashref() } unless ($rows = $sth->rows) { check_sql_log_errstr("Error executing statement:", $dbh->errstr, $dbh->err); goto err_finish; } # Actually look to see if there was data returned in this statement, # else disable node if($rows > 0) { goto out; } else { goto err_finish; } out: $result = $SERVICE_UP; err_finish: $sth->finish(); err_disconnect: $dbh->disconnect(); err_down: service_set($v, $r, $result == $SERVICE_UP ? "up" : "down", {do_log => 1}); return $result; } sub check_connect { my ($v, $r) = @_; my $port = ld_checkport($v, $r); eval { local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{checktimeout}"); alarm $$v{checktimeout}; my $sock = &ld_open_socket($$r{server}, $port, $$v{protocol}); if ($sock) { close($sock); } else { alarm 0; # Cancel the alarm die("Socket Connect Failed"); } &ld_debug(3, "Connected to $$r{server} (port $port)"); alarm 0; # Cancel the alarm }; if ($@) { &service_set($v, $r, "down", {do_log => 1}); &ld_debug(3, "Deactivated service $$r{server}:$$r{port}: $@"); return $SERVICE_DOWN; } else { &service_set($v, $r, "up", {do_log => 1}); &ld_debug(3, "Activated service $$r{server}:$$r{port}"); return $SERVICE_UP; } } sub check_external { my ($v, $r) = @_; my $v_server; if (defined $$v{server}) { $v_server = $$v{server}; } else { $v_server = $$v{fwm}; } my $result = system_timeout($$v{checktimeout}, $$v{checkcommand}, $v_server, $$v{port}, $$r{server}, $$r{port}); if ($result) { &service_set($v, $r, "down", {do_log => 1}); &ld_debug(3, "Deactivated service $$r{server}:$$r{port}: " . "$@ after calling $$v{checkcommand} with result " . "$result"); return 0; } else { &service_set($v, $r, "up", {do_log => 1}); &ld_debug(3, "Activated service $$r{server}:$$r{port}"); return 1; } } sub check_external_perl { my ($v, $r) = @_; my $result; my $v_server; eval { local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{checktimeout}"); alarm $$v{checktimeout}; if (defined $$v{server}) { $v_server = $$v{server}; } else { $v_server = $$v{fwm}; } my $cmdfunc = $check_external_perl__funcs{$$v{checkcommand}}; if (!defined($cmdfunc)) { open(CMDFILE, "<$$v{checkcommand}") || die "cannot open external-perl checkcommand file: $$v{checkcommand}"; $cmdfunc = eval("sub { \@ARGV=\@_; " . join("", ) . " }"); close(CMDFILE); $check_external_perl__funcs{$$v{checkcommand}} = $cmdfunc; } no warnings 'redefine'; local *CORE::GLOBAL::exit = sub { $result = shift; goto external_exit; }; $cmdfunc->($v_server, $$v{port}, $$r{server}, $$r{port}); external_exit: alarm 0; }; if ($@ or $result != 0) { &service_set($v, $r, "down"); &ld_debug(3, "Deactivated service $$r{server}:$$r{port}: " . "$@ after calling (external-perl) $$v{checkcommand} with result " . "$result"); return 0; } else { &service_set($v, $r, "up"); &ld_debug(3, "Activated service $$r{server}:$$r{port}"); return 1; } } sub check_sip { my ($v, $r) = @_; my $sip_d_port = ld_checkport($v, $r); &ld_debug(2, "Checking SIP server=$$r{server} port=$sip_d_port"); eval { use Socket; local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{checktimeout}"); alarm $$v{negotiatetimeout}; my $sock = &ld_open_socket($$r{server}, $sip_d_port, $$v{protocol}); unless ($sock) { alarm 0; die("Socket Connect Failed"); } my ($sip_s_addr_str, $sip_s_port) = &ld_get_addrport($sock); &ld_debug(3, "Connected from $sip_s_addr_str:$sip_s_port to " . $$r{server} . ":$sip_d_port"); select $sock; $|=1; select STDOUT; my $request = "OPTIONS sip:" . $$v{login} . " SIP/2.0\r\n" . "Via: SIP/2.0/UDP $sip_s_addr_str:$sip_s_port;" . "branch=z9hG4bKhjhs8ass877\r\n" . "Max-Forwards: 70\r\n" . "To: \r\n" . "From: ;tag=1928301774\r\n" . "Call-ID: " . (join "", map { unpack "H*", chr(rand(256)) } 1..8) . "\r\n" . "CSeq: 63104 OPTIONS\r\n" . "Contact: \r\n" . "Accept: application/sdp\r\n" . "Content-Length: 0\r\n\r\n"; print "Request:\n$request"; print $sock $request; my $ok; my $reply; while (<$sock>) { chomp; $/="\r"; chomp; $/="\n"; last if ($_ eq ""); if (!defined $ok) { # Check status $ok = $_; if ($ok !~ m/^SIP\/2.0 200 OK/) { alarm 0; # Cancel the alarm close($sock); die "$ok\n"; } next; } $reply .= "$_\n"; # Add more checks here as desired } alarm 0; # Cancel the alarm close($sock); if (!defined $ok) { die "No OK\n"; } print "Reply:\n$ok\n$reply\n"; }; if ($@) { &service_set($v, $r, "down", {do_log => 1}); &ld_debug(3, "Deactivated service $$r{server}:$$r{port}: $@"); return $SERVICE_DOWN; } else { &service_set($v, $r, "up", {do_log => 1}); &ld_debug(3, "Activated service $$r{server}:$$r{port}"); return $SERVICE_UP; } } sub check_simpletcp { my ($v, $r) = @_; my $d_port = ld_checkport($v, $r); &ld_debug(2, "Checking simpletcp server=$$r{server} port=$d_port"); eval { use Socket; local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "Timeout Alarm" }; &ld_debug(4, "Timeout is $$v{checktimeout}"); alarm $$v{negotiatetimeout}; my $sock = &ld_open_socket($$r{server}, $d_port, $$v{protocol}); unless ($sock) { alarm 0; die("Socket Connect Failed"); } my ($s_addr_str, $s_port) = &ld_get_addrport($sock); &ld_debug(3, "Connected from $s_addr_str:$s_port to " . $$r{server} . ":$d_port"); select $sock; $|=1; select STDOUT; my $request = substr($$r{request}, 1); $request =~ s/\\n/\n/g ; &ld_debug(2, "Checking simpletcp server=$$r{server} port=$d_port request:\n$request"); print $sock $request; shutdown($sock, SHUT_WR); my $ok; my $reply; while (<$sock>) { &ld_debug(2, "Checking simpletcp server=$$r{server} port=$d_port receive=" . $$r{receive} ." got: $_\n"); if ( $_ =~ /$$r{receive}/ ) { $ok = 1; last; } } alarm 0; # Cancel the alarm close($sock); if (!defined $ok) { die "No OK\n"; } }; if ($@) { &service_set($v, $r, "down", {do_log => 1}); &ld_debug(3, "Deactivated service $$r{server}:$$r{port}: $@"); return $SERVICE_DOWN; } else { &service_set($v, $r, "up", {do_log => 1}); &ld_debug(3, "Activated service $$r{server}:$$r{port}"); return $SERVICE_UP; } } sub check_ftp { require Net::FTP; my ($v, $r) = @_; my $ftp; my $memory; my $debug = ($DEBUG > 2) ? 1 : 0; my $port = ld_checkport($v, $r); &ld_debug(2, "Checking FTP server=$$r{server} port=$port"); &ld_debug(4, "Timeout is $$v{negotiatetimeout}"); open(TMP,'+>', undef); # In some cases Net::FTP dies if there is a timeout eval { unless ($ftp = Net::FTP->new("$$r{server}:$port", Timeout=>$$v{negotiatetimeout}, Debug=>$debug)) { die "Could not connect\n"; } $ftp->login($$v{login}, $$v{passwd}); $ftp->cwd("/"); $ftp->binary(); $ftp->pasv(); $ftp->get("$$r{request}", *TMP); $ftp->quit(); }; if ($@) { &ld_debug(2, "Warning: $@"); } seek TMP, 0, 0; local $/; $memory = ; close TMP; if ($memory =~ /$$r{receive}/) { service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } service_set($v, $r, "down", {do_log => 1}); return $SERVICE_DOWN; } sub check_dns { my $res; my $query; my $rr; my $request; my $server; my ($v,$r) = @_; my $port = ld_checkport($v, $r); { # Net::DNS makes unguarded calls to eval # which throw a fatal exception if they fail # Needless to say, this is completely stupid. local $SIG{'__DIE__'} = "DEFAULT"; # When fork=yes we need to ignore the child death local $SIG{'CHLD'} = "IGNORE"; require Net::DNS; } $res = new Net::DNS::Resolver; if($DEBUG > 2) { $res->debug(1); } $$r{"request"} =~ m/^\/?(.*)/; $request=$1; $server = &ld_strip_brackets($$r{server}); &ld_debug(2, "Checking DNS: request=\"$request\" receive=\"" . $$r{"receive"} . "\"\n"); eval { local $SIG{'__DIE__'} = "DEFAULT"; local $SIG{'ALRM'} = sub { die "timeout\n"; }; alarm($$v{negotiatetimeout}); $res->nameservers($server); $res->port($port); if ($$v{"protocol"} eq "tcp") { $res->usevc(1); } $query = $res->search($request); alarm(0); }; if (@$ eq "timeout\n" or ! $query) { service_set($v, $r, "down", {do_log => 1}, "Connection timed out"); return $SERVICE_DOWN; } my $recstr = $$r{receive}; foreach $rr ($query->answer) { if (($rr->type eq "A" and length($recstr) and $rr->address =~ /$recstr/) or ($rr->type eq "PTR" and length($recstr) and $rr->ptrdname =~ /$recstr/)) { service_set($v, $r, "up", {do_log => 1}, "Success"); return $SERVICE_UP; } } service_set($v, $r, "down", {do_log => 1}, "Response mismatch"); return $SERVICE_DOWN; } sub check_ping { use Net::Ping; my ($v,$r) = (@_); &ld_debug(2, "Checking ping: " . "host=\"" . $$r{server} . "\" checktimeout=\"" . $$v{"checktimeout"} . "\" checkcount=\"" . $$v{"checkcount"} . "\"\n"); my $p = Net::Ping->new("icmp","1","64"); for (my $attempt = 0; $attempt < $$v{"checkcount"}; $attempt++) { if ($p->ping($$r{server}, $$v{"checktimeout"})) { &ld_debug(2, "pong from $$r{server}\n"); service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } &ld_debug(2, "ping to $$r{server} timed out " . "(attempt " . ($attempt + 1) . "/" . $$v{"checkcount"} . ")\n"); } service_set($v, $r, "down"); return $SERVICE_DOWN; } # check_none # Dummy function to check service if service type is none. # Just activates the real server sub check_none { my ($v, $r) = @_; &ld_debug(2, "Checking none"); service_set($v, $r, "up", {do_log => 1}); return $SERVICE_UP; } # service_set # Used to bring up and down real servers. # This is the function you should call if you want to bring a real # server up or down. # This function is safe to call regardless of the current state of a # real server. # Do _not_ call _service_up or _service_down directly. # pre: v: virtual that the real service belongs to # Only used to determine the protocol of the service # r: real server to take down # state: up or down # up to bring the real service up # down to bring the real service up # flags: hash with the following (optional) keys: # force => 1 - force setting of the specified state # do_log => 1 - log the state to the monitorfile # (when called as the result of a check) # post: The real server is brought up or down for each virtual service # it belongs to. # return: none sub service_set { my ($v, $r, $state, $flags, $log_msg) = @_; my ($real, $virtual, $virt, $now); if ($$flags{'do_log'}) { $now = localtime(); if (!defined($log_msg)) { $log_msg = "-"; } # URI-escape special log characters ('|' and newlines) $log_msg =~ s/([%|\r\n])/sprintf("%%%.2x", ord($1))/eg; } # Find the real server in @REAL foreach $real (@REAL) { if($real->{"real"} eq get_real_id_str($r, $v)) { $virtual = $real->{"virtual"}; last; } } return unless (defined($virtual)); # Check each virtual service for the real server and make # changes as necessary foreach $v (@VIRTUAL){ # Use found rather than relying on tmp_id being # set when we leave the foreach loop. There # seems to some weirdness in Perl (5.6.0 on Redhat 7.2) my $found = 0; my $tmp_id; my $virtual_id = get_virtual_id_str($v); my $real_id = get_real_id_str($r, $v); my $log_str = "real server=$real_id" . " (virtual=$virtual_id)"; foreach $tmp_id (@$virtual) { if($virtual_id eq $tmp_id) { $found = 1; last; } } if ($found == 1) { if ($state=~/up/i) { _service_up($v, $r, $$flags{"force"}); &ld_debug(2, "Enabled $log_str"); } elsif ($state=~/down/i) { _service_down($v, $r, $$flags{"force"}); &ld_debug(2, "Disabled $log_str"); } if ($$v{"monitorfile"} and $$flags{"do_log"}) { my $real_log_msg = $real_id; $real_log_msg =~ tr/:/ /s; $real_log_msg =~ s/\\//g; unless( open(CHECKLOG, ">>$$v{monitorfile}") and print CHECKLOG "[$now] [$$] $real_log_msg [$state] $log_msg\n" and close(CHECKLOG) ) { die("Error writing to monitorfile '$$v{monitorfile}': $!"); } } } } } # _remove_service # Remove a real server by either making it quiescent or deleting it # Should be called by _service_down or fallback_off # I.e. If you want to change the state of a real server call service_set. # If you call this function directly then ldirectord will lose track # of the state of real servers. # If the real server exists (which it should) make it quiescent or # delete it, depending on the global and per virtual service quiescent flag. # If it # doesn't exist, just leave it as it will be added by the # _service_up code as appropriate. # pre: v: reference to virtual service to with the real server belongs # rservice: service to restore. Of the form server:port for a tcp or # udp service. Of the form fwmark for a fwm service. # rforw: Forwarding mechanism of service. Sould be one of "-g" "-i" or # "-m" # tag: Tag to use for logging. Should be either "real" or "fallback" # post: real service is taken up from the respective virtual service # if it is inactive # return: none sub _remove_service { my ($v, $rservice, $rforw, $tag) = (@_); my $oldsrv; my $ov; my $or; my $ipvsadm_args; my $log_args; my $virtual_str; my $old_rservice; my $is_quiescent; $virtual_str = &get_virtual($v); $oldsrv=&ld_read_ipvsadm(); $ov=$oldsrv->{&get_real_service_str($v)}; if(!defined($ov)){ return; } if ($tag ne "fallback" and ((defined $$v{quiescent} and $$v{quiescent} eq "yes") or (!defined($$v{quiescent}) and $QUIESCENT eq "yes"))){ $is_quiescent = "quiescent"; } $or=$ov->{"real"}->{$rservice}; # If a virtual service is a IP/port service (not fwmark) # and a real-servers uses a forwarding mechanism other than masq # then the port will always be that of the virtual service. # This includes real-servers that LVS has set to use # the local forwarding mechanism because their IP address # is local. Thus, if $rservice does not exist test # for the same ip address with the virtual servers port. # N.B: This could cause strange things to happen if # there is a clash between two real servers on different ports # that LVS has mapped to being the same thing. if(!defined($or)) { $old_rservice = $rservice; $rservice =~ /(.*):(.*)/; $rservice = $1; $virtual_str =~ /(.*):(.*)/; $rservice .= ":" . $2; $or=$ov->{"real"}->{$rservice}; # If this doesn't exist either, use the original service. # Otherwise if masq and quiescence is in use, the # real server is not local, and it has an alternate port to # the virtual server, using the mapped service will # result in a quiescent service being created on the # virtual server's port, which is not wanted. if(!defined($or)) { $rservice = $old_rservice; $old_rservice = undef; } } if((!defined($or) and !defined($is_quiescent)) or (defined($is_quiescent) and defined($or) and $or->{"weight"} eq 0 and get_forward_flag($or->{"forward"}) eq $rforw)){ return; } $ipvsadm_args = "$$v{proto} " . &get_virtual_option($v) . " -r $rservice"; $log_args = "$tag server: $rservice "; if(defined($old_rservice)) { $log_args .= "mapped from $old_rservice " } $log_args .= "($virtual_str)"; my $server_str=$rservice . " " . $virtual_str; my $currenttime=time(); if(defined($is_quiescent)) { if (defined($or)) { &system_wrapper("$IPVSADM -e " . "$ipvsadm_args $rforw -w 0"); &ld_log("Quiescent $log_args (Weight set to 0)"); &ld_emailalert_send("Quiescent $log_args (Weight set to 0)", $v, $rservice, $currenttime); } elsif ($READDQUIESCENT eq "yes") { &system_wrapper("$IPVSADM -a " . "$ipvsadm_args $rforw -w 0"); &ld_log("Readd Quiescent $log_args (Weight set to 0)"); &ld_emailalert_send("Quiescent $log_args (Weight set to 0)", $v, $rservice, $currenttime); } } else { &system_wrapper("$IPVSADM -d $ipvsadm_args"); &ld_log("Deleted $log_args"); &ld_emailalert_send("Deleted $log_args", $v, $rservice, $tag eq "fallback" ? 0 : $currenttime); } } # _restore_service # Make a retore a real server. The opposite of _quiescent_server. # Should be called by _service_up or fallback_on # I.e. If you want to change the state of a real server call service_set. # If you call this function directly then ldirectord will lose track # of the state of real servers. # If the real server exists (which it should) make it quiescent. If it # doesn't exist, just leave it as it will be added by the _service_up code # as appropriate. # pre: v: reference to virtual service to with the real server belongs # rservice: service to restore. Of the form server:port for a tcp or # udp service. Of the form fwmark for a fwm service. # rforw: Forwarding mechanism of service. Sould be one of "-g" "-i" or # "-m" # rwght: Weight of service. Sold be of the form "" # e.g. "1" # tag: Tag to use for logging. Should be either "real" or "fallback" # post: real service is taken up from the respective virtual service # if it is inactive # return: none sub _restore_service { my ($v, $rservice, $rforw, $rwght, $tag, $lthreshold, $uthreshold) = (@_); $lthreshold=0 unless (defined $lthreshold); $uthreshold=0 unless (defined $uthreshold); my $oldsrv; my $ov; my $or; my $ipvsadm_args; my $log_args; $ipvsadm_args = "$$v{proto} " . &get_virtual_option($v) . " -x $uthreshold -y $lthreshold" #threshold - . " -r $rservice $rforw -w $rwght"; + . " -r $rservice $rforw -w $rwght"; $log_args = "$tag server: $rservice " . "(" #. scalar(%{$v->{real_status}}) . &get_virtual($v) . ")"; #if the server exists then restore its weight # otherwise add the server $oldsrv=&ld_read_ipvsadm(); $ov=$oldsrv->{&get_real_service_str($v)}; if(defined($ov)){ $or=$ov->{"real"}->{$rservice}; } if(defined($or)){ unless($or->{"weight"} eq $rwght and $or->{"u-threshold"} eq $uthreshold and #threshold $or->{"l-threshold"} eq $lthreshold and #threshold get_forward_flag($or->{"forward"}) eq $rforw){ &system_wrapper("$IPVSADM -e $ipvsadm_args"); &ld_log("Restored $log_args (Weight set to $rwght)"); &ld_emailalert_send("Restored $log_args " . "(Weight set to $rwght)", $v, $rservice, 0); } } else { &system_wrapper("$IPVSADM -a $ipvsadm_args"); &ld_log("Added $log_args (Weight set to $rwght)"); &ld_emailalert_send("Added $log_args (Weight set to $rwght)", $v, $rservice, 0); } } # Check the status of a server # Should only be called from _status_up, _status_down, # _service_up, or _service_down # Returns 1 if the server is up, 0 if down sub _status_check { my ($v, $r, $is_fallback) = (@_); my $virtual_id = get_virtual_id_str($v); my $real_id = get_real_id_str($r, $v); if (defined($is_fallback)) { if (defined($v->{real_status}) or (defined($v->{fallback_status}) and $v->{fallback_status}->{"$real_id"})) { return 1; } } else { if (defined ($v->{real_status}) and $v->{real_status}->{"$real_id"}) { return 1; } } return 0; } # Set the status of a server as up # Should only be called from _service_up or _ld_start sub _status_up { my ($v, $r, $is_fallback) = (@_); my $virtual_id = get_virtual_id_str($v); my $real_id = get_real_id_str($r, $v); return undef if(_status_check($v, $r, $is_fallback)); $r->{virtual_status}->{"$virtual_id"} = 1; if (defined $is_fallback) { $v->{fallback_status}->{"$real_id"} = 1; } else { $v->{real_status}->{"$real_id"} = 1; } return 1; } # Set the status of a server as down # Should only be called from _service_down or ld_stop sub _status_down { my ($v, $r, $is_fallback) = (@_); my $virtual_id = get_virtual_id_str($v); my $real_id = get_real_id_str($r, $v); return undef if (!_status_check($v, $r, $is_fallback)); if (defined($is_fallback)) { delete $v->{fallback_status}->{"$real_id"}; if (! %{$v->{fallback_status}}) { $v->{fallback_status} = undef; } } else { delete $v->{real_status}->{"$real_id"}; if (! %{$v->{real_status}}) { $v->{real_status} = undef; } } delete $r->{virtual_status}->{"$virtual_id"}; if (! %{$r->{virtual_status}}) { $r->{virtual_status} = undef; } return 1; } # _service_up # Bring a real service up if it is down # Should be called by service_set only # I.e. If you want to change the state of a real server call service_set. # If you call this function directly then ldirectord will lose track # of the state of real servers. # pre: v: reference to virtual service to with the real server belongs # r: reference to the real server to take down # post: real service is taken up from the respective virtual service # if it is inactive # return: none sub _service_up { my ($v, $r, $force) = (@_); if ($r->{failcount} > 0) { ld_log("Resetting soft failure count: " . $r->{server} . ":" . $r->{port} . " (" . get_virtual_id_str($v) . ")"); } $r->{failcount} = 0; if (! _status_up($v, $r) and ! defined($force)) { return; } &_restore_service($v, $r->{server} . ":" . $r->{port}, $r->{forw}, $r->{weight}, "real", $r->{'l-threshold'},$r->{'u-threshold'} ); #threshold &fallback_off($v); } # _service_down # Bring a real service down if it is up # Should be called by service_set only # I.e. if you want to change the state of a real server call service_set. # If you call this function directly then ldirectord will lose track # of the state of real servers. # pre: v: reference to virtual service to with the real server belongs # r: reference to the real server to take down # post: real service is taken down from the respective virtual service # if it is active # return: none sub _service_down { my ($v, $r, $force) = @_; if (!_status_check($v, $r) and !defined($force)) { return; } $r->{failcount}++; if (!defined($force) and _status_check($v, $r) and ($r->{failcount} < $v->{failurecount})) { ld_log("Soft failure real server: " . $r->{server} . ":" . $r->{port} . " (" . get_virtual_id_str($v) . ") failure " . $r->{failcount} . "/" . $v->{failurecount}); return; } _status_down($v, $r); &_remove_service($v, $r->{server} . ":" . $r->{port}, $r->{forw}, "real"); &fallback_on($v); } # fallback_on # Turn on the fallback server for a virtual service if it is inactive # pre: v: virtual to turn fallback service on for # post: fallback server is turned on if it was inactive # return: none sub fallback_on { my ($v, $force) = (@_); my $fallback=&fallback_find($v); if (defined($fallback) and (_status_up($v, $fallback, "fallback") or defined($force))) { &_restore_service($v, $fallback->{server} . ":" . $fallback->{port}, get_forward_flag($fallback->{forward}), "1", "fallback"); } if (!defined ($v->{real_status})) { &do_fallback_command($v, "start"); } } # fallback_off # Turn off the fallback server for a virtual service if it is active # pre: v: virtual to turn fallback service off for # post: fallback server is turned off if it was active # return: none sub fallback_off { my ($v, $force) = (@_); my $fallback=&fallback_find($v); if (defined($fallback) and (_status_down($v, $fallback, "fallback") or defined($force))) { &_remove_service($v, $fallback->{server} . ":" . $fallback->{port}, get_forward_flag($fallback->{forward}), "fallback"); } if (defined ($v->{real_status})) { &do_fallback_command($v, "stop"); } } # fallback_find # Determine the fallback for a virtual service # pre: virtual: reference to a virtual service # post: none # return: $virtual->{"fallback"} if defined # else $FALLBACK->{$virtual->{"protocol"}} if defined # else undef sub fallback_find { my ($virtual) = (@_); my($global_fallback_ptr); # fallback pointer my $ipv6p = ($virtual->{addressfamily} == AF_INET6) ? 1 : 0; if( defined $virtual->{"fallback"} ) { return($virtual->{"fallback"}); } elsif ( not defined($FALLBACK) and not $ipv6p ) { return undef; } elsif ( not defined($FALLBACK6) and $ipv6p ) { return undef; } if ($ipv6p) { # IPv6 $global_fallback_ptr = $FALLBACK6; } else { $global_fallback_ptr = $FALLBACK; } # If the global fallback has a port, it can be used as is if (defined($global_fallback_ptr->{$virtual->{"protocol"}}->{"port"})) { return $global_fallback_ptr->{$virtual->{"protocol"}}; } # Else create an anonymous fallback my %anon_fallback = %{$global_fallback_ptr->{$virtual->{"protocol"}}}; $anon_fallback{"port"} = $virtual->{"port"}; return \%anon_fallback; } # fallback_command # Execute the fallback command with the given status if it wasn't executed # with this status already for the supplied virtual service. sub do_fallback_command { my ($v, $status) = (@_); if (defined $v->{fallbackcommand_status} and $v->{fallbackcommand_status} eq $status) { return; } $v->{fallbackcommand_status} = $status; if (defined($v->{fallbackcommand})) { &system_wrapper($v->{fallbackcommand} . " " . $status . " " . $v->{server} . ":" . $v->{port} . " " . $v->{protocol}); } elsif (defined($FALLBACKCOMMAND)) { &system_wrapper($FALLBACKCOMMAND . " " . $status . " " . $v->{server} . ":" . $v->{port} . " " . $v->{protocol}); } } # Used during stop, start and reload to remove stale real servers from LVS sub purge_untracked_service { my ($v, $rservice, $tag) = (@_); my $log_arg = "Purged real server ($tag): $rservice (" . &get_virtual($v) . ")"; &system_wrapper("$IPVSADM -d $v->{proto} " . &get_virtual_option($v) . " -r $rservice"); &ld_log($log_arg); &ld_emailalert_send($log_arg, $v, $rservice, 0); } # Used during stop, start and reload to remove stale real servers from LVS sub purge_service { my ($v, $r, $tag) = (@_); purge_untracked_service($v, "$r->{server}:$r->{port}", $tag); _status_down($v, $r); } # Used during stop, start and reload to remove stale virtual services from LVS sub purge_virtual { my ($v, $tag) = (@_); &system_wrapper("$IPVSADM -D $v->{proto} " . &get_virtual_option($v)); &ld_log("Purged virtual server ($tag): " . &get_virtual($v)); } sub check_cfgfile { my ($dev, $ino, $mode, $nlink, $uid, $gid, $rdev, $size, $atime, $mtime) = stat($CONFIG); my ($status); return if ($stattime==$mtime); $stattime = $mtime; use Digest::MD5 qw(md5 md5_hex); my $ctx = Digest::MD5->new; unless (open(CFGFILE, "<$CONFIG")) { &config_warn(0, "can not open file $CONFIG for checking"); return 0; } $ctx->addfile(*CFGFILE); close(CFGFILE); my $digest = $ctx->hexdigest; if (defined $checksum && $checksum ne $digest) { &ld_log("Configuration file '$CONFIG' has changed on disk"); if ($AUTOCHECK eq "yes") { &ld_log(" - reread new configuration"); &reread_config(); } else { &ld_log(" - ignore new configuration\n"); } if (defined($CALLBACK) and -x $CALLBACK) { &system_wrapper("$CALLBACK $CONFIG"); } $status = 1; } $checksum = $digest; return $status; } # ld_openlog # Open logger # make log rotation work # pre: none # post: If logger is a file, it opened and closed again as a test # If logger is syslog, it is opened so it can be used without # needing to be opened again. # Otherwise, nothing is done. # return: 0 on success # 1 on error sub ld_openlog { if ($opt_d or $SUPERVISED eq "yes") { # Instantly do nothing return(0); } if( $LDIRLOG =~ /^\/(.*)/ ) { # Open and close the file as a test. # We open the file each time we want to log to it unless (open(LOGFILE, ">>$LDIRLOG") and close(LOGFILE)) { return 1; } } else { # Assume LDIRLOG is a logfacility, log to syslog setlogsock( "unix" ); openlog( "ldirectord", "pid", "$LDIRLOG" ); } return(0); } # ld_log # Log a message. # pre: message: Message to write # post: message and timetsamp is written to loged # If logger is a file, it is opened and closed again as a # primitive means to make log rotation work # return: 0 on success # 1 on error sub ld_log { my ($message) = (@_); my $now = localtime(); &ld_debug(2, $message); chomp $message; if ($opt_d) { print STDERR "$message\n"; } elsif ($SUPERVISED eq "yes") { print "[$now] $message\n"; } elsif ( $LDIRLOG =~ /^\/(.*)/ ) { unless (open(LOGFILE, ">>$LDIRLOG") and print LOGFILE "[$now|$CFGNAME|$$] $message\n" and close(LOGFILE)) { print STDERR "$message\n"; return 1; } } else { # Assume LDIRLOG is a logfacility, log to syslog syslog( "info", "$message" ); } return(0); } sub daemon_status_str { if ($DAEMON_STATUS == $DAEMON_STATUS_STARTING) { return "starting"; } elsif ($DAEMON_STATUS == $DAEMON_STATUS_RUNNING) { return "running"; } elsif ($DAEMON_STATUS == $DAEMON_STATUS_STOPPING) { return "stopping"; } elsif ($DAEMON_STATUS == $DAEMON_STATUS_RELOADING) { return "reloading"; } return "UNKNOWN"; } # ld_emailalert_send # Send email alerts per virtual server # pre: message: Message to email # post: message is emailed if emailalert defined for virtualserver # return: 0 on success # 1 on error sub ld_emailalert_send { my ($subject, $v, $rserver, $currenttime) = (@_); my $status = 0; my $to_addr; my $frequency; my $virtual_str; my $id; my $statusfilter; my $smtp_server; my $virtual_info; $frequency = defined $v->{emailalertfreq} ? $v->{emailalertfreq} : $EMAILALERTFREQ; $virtual_str = &get_virtual($v); $id = "$rserver ($virtual_str)"; if ($currenttime == 0 or $frequency == 0) { delete $EMAILSTATUS{"$id"}; } else { $EMAILSTATUS{$id}->{v} = $v; $EMAILSTATUS{$id}->{alerttime} = $currenttime; } $statusfilter = defined $v->{emailalertstatus} ? $v->{emailalertstatus} : $EMAILALERTSTATUS; if (($DAEMON_STATUS & $statusfilter) == 0) { return 0; } $to_addr = defined $v->{emailalert} ? $v->{emailalert} : $EMAILALERT; if ($to_addr eq "") { return 0; } $smtp_server = defined $v->{smtp} ? $v->{smtp} : $SMTP; &ld_log("emailalert: $subject"); # get extra service details $virtual_info = _ld_virtual_server_details($v); # add service name into e-mail subject if it has been set if ($v->{servicename}) { $subject = "[" . $v->{servicename} ."] $subject"; } if (defined $smtp_server) { $status = &ld_emailalert_net_smtp($smtp_server, $to_addr, $subject, $virtual_info); } else { $status = &ld_emailalert_mail_send($to_addr, $subject, $virtual_info); } return($status); } # generate virtual server information to go in to alert e-mails sub _ld_virtual_server_details { my ($v) = @_; my $details; if ($v->{servicename}) { $details .= "Service name: " . $v->{servicename} . "\n" } if ($v->{comment}) { $details .= "Comment: " . $v->{comment} . "\n"; } return $details; } # ld_emailalert_net_smtp # Send email alerts via SMTP server # pre: smtp: SMTP server defined # post: message is emailed if SMTP server is valid and working # return: 0 on success # 1 on error sub ld_emailalert_net_smtp { my ($smtp_server, $to_addr, $subject, $extrabody) = (@_); my $status = 0; use Net::SMTP; use Sys::Hostname; my $hostname = hostname; my $smtp = Net::SMTP->new($smtp_server); if ($smtp) { my $myusername = getpwuid( $< ); $smtp->mail("$myusername\@$hostname"); $smtp->to($to_addr); $smtp->data(); if($EMAILALERTFROM) { $smtp->datasend("From: $EMAILALERTFROM\n"); } else { $smtp->datasend("From: $myusername\@$hostname\n"); } $smtp->datasend("To: $to_addr\n"); $smtp->datasend("Subject: $subject\n\n"); $smtp->datasend("ldirectord host: $hostname\n" . "Log-Message: $subject\n" . "Daemon-Status: " . &daemon_status_str() . "\n"); $smtp->datasend("\n$extrabody\n") if ($extrabody); $smtp->dataend(); $smtp->quit; } else { &ld_log("failed to send SMTP email message\n"); $status = 1; } return($status); } # ld_emailalert_mail_send # Send email alerts via Mail::Send # pre: smtp: SMTP server not defined # post: message is emailed if one of the Mail::Send methods works # return: 0 on success # 1 on error sub ld_emailalert_mail_send { my ($to_addr, $subject, $extrabody) = (@_); my $emailmsg; my $emailfh; my $status = 0; use Mail::Send; $emailmsg = new Mail::Send Subject=>$subject, To=>$to_addr; $emailmsg->set('From', $EMAILALERTFROM) if ($EMAILALERTFROM); $emailfh = $emailmsg->open; print $emailfh "ldirectord host: " . hostname() . "\n" . "Log-Message: $subject\n" . "Daemon-Status: " . &daemon_status_str() . "\n"; print $emailfh "\n$extrabody\n" if ($extrabody); unless ($emailfh->close) { &ld_log("failed to send email message\n"); $status = 1; } return($status); } # ld_emailalert_resend # Resend email alerts as necessary # pre: none # post: EMAILSTATUS array is updated and alerts are sent as necessary # return: none sub ld_emailalert_resend { my $currenttime = time(); my $es; my $id; my $rserver; my $frequency; foreach $id (keys %EMAILSTATUS) { $es = $EMAILSTATUS{$id}; $frequency = defined $es->{v}->{emailalertfreq} ? $es->{v}->{emailalertfreq} : $EMAILALERTFREQ; $id =~ m/(.*) /; $rserver = $1; if ($currenttime - $es->{alerttime} < $frequency) { next; } &ld_emailalert_send("Inaccessible real server: $id", $es->{v}, $rserver, $currenttime); } } # ld_debug # Log a message to a STDOUT. # pre: priority: priority of message # message: Message to write # post: message is written to STDOUT if $DEBUG >= priority # return: none sub ld_debug { my ($priority, $message) = (@_); if ( $DEBUG >= $priority ) { chomp $message; print STDERR "DEBUG${priority}: $message\n"; } } # system_wrapper # Wrapper around system() to log errors # # WARNING: Do not use alarm() together with this function. A internal # pipe will not be reclaimed (at least with Perl 5.8.8). This can # cause ldirectord to run out of file handles. # # pre: LIST: arguments to pass to system() # post: system() is called and if it returns non-zero a failure # message is logged # return: return value of system() sub system_wrapper { my (@args)=(@_); my $status; &ld_log("Running system(@args)") if $DEBUG>2; $status = system(@args); if($status != 0) { &ld_log("system(@args) failed: $!"); } return($status) } # system_timeout # Emulate system() with timeout via fork(), exec(), and waitpid() and # TERMinate the child on timeout. Set an alarm() for the timeout. # # This function does not suffer the deficiencies of system_wrapper() # of leaving pipes unreclaimed. Zombies are reaped by ld_handler_chld # and the related code. # # pre: timeout: timeout in seconds # LIST: arguments to pass to exec() # return: >= 0 exit status of the child process # 127 exec failed # -1 timeout # -2 fork failed sub system_timeout { my $timeout = shift; my (@args) = (@_); my $status; &ld_log("Running system_timeout($timeout, @args)") if $DEBUG>2; my $childpid = fork(); if (!defined($childpid)) { &ld_log("fork failed: $!"); return(-2); } elsif ($childpid) { # parent eval { local $SIG{'ALRM'} = sub { die "timeout\n"; }; alarm $timeout; waitpid($childpid, 0); $status = $? >> 8; # When die()-ing in the SIGALRM handler we # will never reach this point. Child/Zombie # is left behind. The grim reaper # (ld_handler_chld + ld_process_chld) will # take care of the zombie. }; alarm 0; if ($@) { # timeout if ($@ ne "timeout\n") { # log unexpected errors &ld_log("system_timeout($timeout, @args) " . "unexpected error: $@"); } else { &ld_log("system_timeout($timeout, @args) " . "timed out, kill -TERM child"); } # TERMinate child kill 15, $childpid; return(-1); } else { # did not timeout return($status); } } else { # child exec(@args) or &ld_exit(127, "exec(@args) failed: $!"); die "ld_exit() broken?, stopped"; } } # exec_wrapper # Wrapper around exec() to log errors # pre: LIST: arguments to pass to exec() # post: exec() is called and if it returns non-zero a failure # message is logged # return: return value of exec() on failure # does not return on success sub exec_wrapper { my (@args)=(@_); my $status; &ld_log("Running exec(@args)") if $DEBUG>2; $status = exec(@args) or &ld_log("exec(@args) failed"); return($status) } # ld_rm_file # Remove a file, symink, or anything that isn't a directory # and exists # pre: filename: file to delete # post: If filename does not exist or is a directory an # error state is reached # Else filename is delete # If $DEBUG >=2 errors are logged # return: 0 on success # -1 on error sub ld_rm_file { my ($filename)=(@_); my ($status); if(-d "$filename"){ &ld_debug(2, "ld_rm_file: $filename is a directory, skipping"); return(-1); } if(! -e "$filename"){ &ld_debug(2, "ld_rm_file: $filename doesn't exist, skipping"); return(-1); } $status = unlink($filename); if($status!=1){ &ld_debug(2, "ld_rm_file: Error deleting: $filename: $!"); } return(($status==1)?0:-1) } # is_octet # See if a number is an octet, that is >=0 and <=255 # pre: alleged_octet: the octet to test # post: alleged_octet is checked to see if it is valid # return: 1 if the alleged_octet is an octet # 0 otherwise sub is_octet { my ($alleged_octet)=(@_); if($alleged_octet<0){ return 0; } if($alleged_octet>255){ return 0; } return(1); } # is_ip # Check that a given string is an IP address # pre: alleged_ip: string representing ip address # post: alleged_ip is checked to see if it is valid # return: 1 if alleged_ip is a valid ip address # 0 otherwise sub is_ip { my ($alleged_ip)=(@_); if ($alleged_ip =~ /:/) { unless(inet_pton(AF_INET6,$alleged_ip)){ return 0; } return(1); } #If we don't have four, . delimited numbers then we have no hope unless($alleged_ip=~m/^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) { return 0; } #Each octet mist be >=0 and <=255 unless(&is_octet($1)){ return 0; } unless(&is_octet($2)){ return 0; } unless(&is_octet($3)){ return 0; } unless(&is_octet($4)){ return 0; } return(1); } # ip_to_int # Turn an IP address given as a dotted quad into an integer # pre: ip_address: string representing IP address # post: post ip_address is converted to an integer # return: -1 if an error occurs # integer representation of IP address otherwise sub ip_to_int { my ($ip_address)=(@_); unless(&is_ip($ip_address)){ return(-1); } unless($ip_address=~m/^(\d+)\.(\d+)\.(\d+)\.(\d+)$/){ return(-1); } return(((((($1<<8)+$2)<<8)+$3)<<8)+$4); } # int_to_ip # Turn an IP address given as a dotted quad into an integer # pre: ip_address: string representing IP address # post: Decimal is converted to a dotted quad # return: -1 if an error occurs # integer representation of IP address otherwise sub int_to_ip { my ($ip_address)=(@_); my $result = ""; return(sprintf( "%d.%d.%d.%d", ($ip_address>>24)&255, ($ip_address>>16)&255, ($ip_address>>8)&255, $ip_address&255 )); } # get_virtual # Get the service for a virtual # pre: nv: virtual to get the service for # post: none # return: fwmark of service if it is a fwm service # ip_address:port otherwise sub get_virtual { my ($nv) = (@_); if ($nv->{"protocol"} eq "fwm"){ return $nv->{"fwm"}; } else { return $nv->{"server"} . ":" . $nv->{"port"}; } } # get_virtual_option # Get the ipvsadm option corresponding to a virtual service # pre: nv: virtual to get the service for # post: none # return: fwmark of service if it is a fwm service # fwmark of service + "-6" if it is a fwm service and the address family is AF_INET6 # ip_address:port otherwise sub get_virtual_option { my ($nv) = (@_); my ($cmdline) = &get_virtual($nv); if ($nv->{"protocol"} eq "fwm" && $nv->{addressfamily} == AF_INET6) { $cmdline .= " -6"; } return $cmdline; } # get_real_id_str # Get an id string for a real server # pre: r: Real service. # protocol: protocol of the real service # tcp or udp # service: type of service # post: none # return: Id string for the real server sub get_real_id_str { my ($r, $v) = (@_); my $request = ""; my $receive = ""; my $checkport = ""; my $virtualhost = ""; my $check; my $real; if(defined($r->{"request"})) { $request = $r->{"request"}; } else { $request = $v->{"request"}; } if(defined($r->{"receive"})) { $receive = $r->{"receive"}; } else { $receive = $v->{"receive"}; } if($v->{"checktype"} eq "negotiate" or $v->{"checktype"} eq "combined") { $check = $v->{"checktype"} . ":" . $v->{"service"}; } elsif($v->{"checktype"} eq "external" or $v->{"checktype"} eq "external-perl") { $check = $v->{"checktype"} . ":" . $v->{"checkcommand"}; } else { $check = $v->{"checktype"}; } if(defined($v->{"checkport"})) { $checkport = $v->{"checkport"}; } if(defined($v->{"virtualhost"})) { $virtualhost = $v->{"virtualhost"}; } $real = $check . ":" . $v->{"protocol"} . ":" . $r->{"server"} . ":" . $r->{"port"} . ":" . $virtualhost . ":" . $checkport . ":" . $r->{"weight"} . ":" . $r->{"forward"} . ":" . quotemeta($request) . ":" . quotemeta($receive); } # get_virtual_id_str # Get an id string for a virtual service # pre: v: Virtual service # post: none # return: Id string for the virtual service sub get_virtual_id_str { my ($v) = (@_); if ($v->{"protocol"} eq "fwm") { return $v->{"protocol"} . (($v->{addressfamily} == AF_INET6)?"6":"") . ":" . &get_virtual($v); } else { return $v->{"protocol"} . ":" . &get_virtual($v); } } # get_forward_flag # Get the ipvsadm flag corresponding to a forwarding mechanism # pre: forward: Name of forwarding mechanism. u # Should be one of ipip, masq or gate # post: none # return: ipvsadm flag corresponding to the forwarding mechanism # " " if $forward is unknown sub get_forward_flag { my ($forward) = (@_); unless(defined($forward)) { return(" "); } if ($forward eq "masq") { return("-m"); } elsif ($forward eq "gate") { return("-g"); } elsif ($forward eq "ipip") { return("-i"); } return(" "); } # ld_exit # Exit and log a message # pre: exit_status: Integer exit status to exit with # 0 will be used if parameter is omitted # message: Message to log when exiting. May be omitted # post: If exit_status is non-zero or $DEBUG>2 then # message logged. # Programme exits with exit_status # return: does not return sub ld_exit { my ($exit_status, $message)=(@_); unless(defined($exit_status)) { $exit_status=0; } unless(defined($message)) { $message=""; } if ($exit_status!=0 or $DEBUG>2) { &ld_log("Exiting with exit_status $exit_status: $message"); } exit($exit_status); } # ld_open_socket # Open a socket connection # pre: remote: IP address as a dotted quad of remote host to connect to # port: port to connect to # protocol: Protocol to use. Should be either "tcp" or "udp" # post: A Socket connection is opened to the remote host # return: Open socket # undef on error sub ld_open_socket { my ($remote, $port, $protocol) = @_; my ($iaddr, $paddr, $pro, $result, $pf); local *SOCK; $remote = &ld_strip_brackets($remote); if (inet_pton(AF_INET6,$remote)) { $iaddr = inet_pton(AF_INET6,$remote); $paddr = pack_sockaddr_in6($port, $iaddr); $pf = PF_INET6; } else { $iaddr = inet_aton($remote) || die "no host: $remote"; $paddr = sockaddr_in($port, $iaddr); $pf = PF_INET; } $pro = getprotobyname($protocol); if ($protocol eq "udp") { socket(SOCK, $pf, SOCK_DGRAM, $pro) || die "socket: $!"; } else { socket(SOCK, $pf, SOCK_STREAM, $pro) || die "socket: $!"; } $result = connect(SOCK, $paddr); unless ($result) { return undef; } return *SOCK; } # daemon # Close and fork to become a daemon. # # Notes from unix programmer faq # http://www.landfield.com/faqs/unix-faq/programmer/faq/ # # Almost none of this is necessary (or advisable) if your daemon is being # started by `inetd'. In that case, stdin, stdout and stderr are all set up # for you to refer to the network connection, and the `fork()'s and session # manipulation should *not* be done (to avoid confusing `inetd'). Only the # `chdir()' step remains useful. # # Gratuitously over documented, because it can be # # Written by Horms, horms@verge.net.au for an unrelated project while # working for Zip World, http://www.zipworld.com.au/, 1997-1999. sub ld_daemon { # `fork()' so the parent can exit, this returns control to the command # line or shell invoking your program. This step is required so that # the new process is guaranteed not to be a process group leader. The # next step, `setsid()', fails if you're a process group leader. &ld_daemon_become_child(); # setsid()' to become a process group and session group leader. Since a # controlling terminal is associated with a session, and this new # session has not yet acquired a controlling terminal our process now # has no controlling terminal, which is a Good Thing for daemons. if(POSIX::setsid()<0){ &ld_exit(1, "ld_daemon: Could not setsid"); } # fork()' again so the parent, (the session group leader), can exit. # This means that we, as a non-session group leader, can never regain a # controlling terminal. &ld_daemon_become_child(); # `chdir("/")' to ensure that our process doesn't keep any directory in # use. Failure to do this could make it so that an administrator # couldn't unmount a filesystem, because it was our current directory. if(chdir("/")<0){ &ld_exit(1, "ld_daemon: Could not chdir"); } # `close()' fds 0, 1, and 2. This releases the standard in, out, and # error we inherited from our parent process. We have no way of knowing # where these fds might have been redirected to. Note that many daemons # use `sysconf()' to determine the limit `_SC_OPEN_MAX'. `_SC_OPEN_MAX' # tells you the maximum open files/process. Then in a loop, the daemon # can close all possible file descriptors. You have to decide if you # need to do this or not. If you think that there might be # file-descriptors open you should close them, since there's a limit on # number of concurrent file descriptors. close(STDIN); close(STDOUT); close(STDERR); # Establish new open descriptors for stdin, stdout and stderr. Even if # you don't plan to use them, it is still a good idea to have them open. # The precise handling of these is a matter of taste; if you have a # logfile, for example, you might wish to open it as stdout or stderr, # and open `/dev/null' as stdin; alternatively, you could open # `/dev/console' as stderr and/or stdout, and `/dev/null' as stdin, or # any other combination that makes sense for your particular daemon. # # This code used to open /dev/console for STDOUT and STDERR, # but that was changed to /dev/null to stop the code hanging in # the case where /dev/console is unavailable for some reason # http://www.osdl.org/developer_bugzilla/show_bug.cgi?id=1180 if(open(STDIN, ">/dev/null")<0){ &ld_exit(-1, "ld_daemon: Could not open /dev/null"); } if(open(STDERR, ">>/dev/null")<0){ &ld_exit(-1, "ld_daemon: Could not open /dev/null"); } } # ld_daemon_become_child # Fork, kill parent and return child process # pre: none # post: process forks and parent exits # All process exit with exit status -1 if an error occurs # return: parent: exits # child: none (this is the process that returns) # Written by Horms, horms@verge.net.au for an unrelated project while # working for Zip World, http://www.zipworld.com.au/, 1997-1999. sub ld_daemon_become_child { my($status); $status = fork(); if ($status<0){ &ld_exit(-1, "ld_daemon_become_child: Could not fork: $!"); } if ($status>0){ &ld_exit(0, "ld_daemon_become_child: Parent exiting as it should"); } } # ld_gethostbyname # Wrapper to gethostbyname. Look up the/an IP address of a hostname # If an IP address is given is it returned # pre: name: Hostname of IP address to lookup # af: Address Family: AF_INET etc.. # post: gethostbyname is called to find an IP address for $name # This is converted to a string # return: IP address # undef on error sub ld_gethostbyname { my ($name, $af)=(@_); if ($name =~ /\[(.*)\]/) { $name = $1; } my @host = getaddrinfo($name, 0, $af); if (!defined($host[3])) { return undef; } my @ret = getnameinfo($host[3], NI_NUMERICHOST | NI_NUMERICSERV); if ($host[0] == AF_INET6) { return "[$ret[0]]"; } else { return $ret[0]; } } # ld_gethostbyaddr # Wrapper to gethostbyaddr. Look up the hostname from an IP address. # If no reverse DNS record is found, return undef # pre: ip: IP address of host to lookup # post: gethostbyaddr is called to find a hostname for IP $ip # return: hostname # undef on error sub ld_gethostbyaddr { my ($ip)=(@_); $ip = &ld_strip_brackets($ip); my @host = getaddrinfo($ip,0); if (!defined($host[3])) { return undef; } my @ret = getnameinfo($host[3], NI_NAMEREQD); return undef unless(scalar(@ret) == 2); return $ret[0]; } # ld_getservbyname # Wrapper for getservbyname. Look up the port for a service name # If a port is given it is returned. # pre: name: Port or Service name to look up # post: if $name is a number # if 0<=$name<=65536 $name is returned # else undef is returned # else getservbyname is called to look up the port for the service # return: Port # undef on error sub ld_getservbyname { my ($name, $protocol)=(@_); if($name=~/^[0-9]+$/){ return(($name>=0 and $name<65536)?$name:undef); } my @serv=getservbyname($name, $protocol); return((@serv and defined($serv[2]))?$serv[2]:undef); } # ld_getservhostbyname # Wrapper for ld_gethostbyname and ld_getservbyname. Given a server of the # form ip_address|hostname[:port|servicename] return ip_address[:port] # pre: hostserv: Servver of the form ip_address|hostname[:port|servicename] # protocol: Protocol for service. Should be either "tcp" or "udp" # af: Address Family: AF_INET etc.. # post: lookups performed as per ld_getservbyname and ld_gethostbyname # return: ip_address[:port] # undef on error sub ld_gethostservbyname{ my ($hostserv, $protocol, $af) = (@_); my $ip; my $port; if ($hostserv =~ /(:(\d+|[A-Za-z0-9-_]+))?$/) { $port = $2; $ip = $hostserv; $ip =~ s/(:(\d+|[A-Za-z0-9-_]+))?$//; } else { $ip = $hostserv; } $ip=&ld_gethostbyname($ip, $af) or return(undef); if(defined($port)){ $port=&ld_getservbyname($port, $protocol); if (defined($port)) { return("$ip:$port"); } else { return(undef); } } return($ip); } # ld_find_cmd_path # Find executable in path # pre: cmd: command to find # path: ':' delimited paths to check # relative: if set, allow cmd to be a relative path, # which is checked first # return: path to command # undef if not found sub ld_find_cmd_path { my ($cmd, $path, $relative) = (@_); if (defined $relative and $relative and -f "$cmd" ) { return $cmd; } if ($cmd =~ /^\// and -x "$cmd" ) { return $cmd; } if ($cmd =~ /\//) { return undef; } for my $p (split /:/, $path) { if ( -x "$p/$cmd" ) { return "$p/$cmd"; } } return undef; } # ld_find_cmd_path # Find executable in $ENV{'PATH'} # pre: cmd: command to find # relative: if set, allow cmd to be a relative path, # which is checked first # return: path to command # undef if not found sub ld_find_cmd { return ld_find_cmd_path($_[0], $ENV{'PATH'}, $_[1]); } # ld_get_addrport # Get address string and port number from a given socket. # pre: socket # return: (address, port) # undef if cannot get sub ld_get_addrport { my($sock) = @_; my ($s_addr_str, $s_port, $s_addr, $len); my $s_sockaddr = getsockname($sock); $len = length($s_sockaddr); if ($len == 28) { # IPv6 ($s_port, $s_addr) = unpack_sockaddr_in6($s_sockaddr); $s_addr_str = inet_ntop(AF_INET6, $s_addr); $s_addr_str = "[$s_addr_str]"; } elsif ($len == 16) { # IPv4 ($s_port, $s_addr) = unpack_sockaddr_in($s_sockaddr); $s_addr_str = inet_ntop(AF_INET, $s_addr); } else { die "unexpected length of sockaddr\n"; } return ($s_addr_str, $s_port); } # ld_strip_brackets # Strip brackets in the string # pre: string # return: string sub ld_strip_brackets { my($str) = @_; $str =~ s/[\[\]]//g; return $str; }