diff --git a/Makefile.am b/Makefile.am index 1769c6e39..fccaca493 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,178 +1,178 @@ # # Copyright (C) 2008 Andrew Beekhof # Copyright (C) 2011 Fabio M. Di Nitto # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version 2 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # MAINTAINERCLEANFILES = Makefile.in aclocal.m4 configure DRF/config-h.in \ missing install-sh autoscan.log configure.scan \ DRF/stamp-h.in libtool.m4 ltdl.m4 libltdl.tar \ compile config.guess config.sub depcomp SPEC = $(PACKAGE_NAME).spec TARFILES = $(PACKAGE_NAME)-$(VERSION).tar.bz2 \ $(PACKAGE_NAME)-$(VERSION).tar.gz SUBDIRS = if BUILD_RGMANAGER SUBDIRS += rgmanager RGMANAGER = without else RGMANAGER = with endif if BUILD_LINUX_HA -SUBDIRS += include heartbeat tools ldirectord doc +SUBDIRS += include heartbeat tools ldirectord doc systemd LINUX_HA = without else LINUX_HA = with endif if WITH_COMPAT_HABINDIR COMPAT_HABINDIR = without else COMPAT_HABINDIR = with endif EXTRA_DIST = autogen.sh .version make/release.mk \ make/git-version-gen make/gitlog-to-changelog \ AUTHORS COPYING COPYING.GPLv3 COPYING.LGPL ChangeLog \ $(SPEC).in install-exec-local: if BUILD_LINUX_HA $(INSTALL) -d -m 1755 $(DESTDIR)$(HA_RSCTMPDIR) $(LN_S) ../../lib/heartbeat/ocf-binaries $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-binaries $(LN_S) ../../lib/heartbeat/ocf-directories $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-directories $(LN_S) ../../lib/heartbeat/ocf-returncodes $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-returncodes $(LN_S) ../../lib/heartbeat/ocf-shellfuncs $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-shellfuncs endif if BUILD_RGMANAGER if BUILD_LINUX_HA $(LN_S) ${CLUSTERDATA} $(DESTDIR)${OCF_RA_DIR_PREFIX}/redhat endif $(INSTALL) -d $(DESTDIR)/$(LOGDIR) endif dist-clean-local: rm -f autoconf automake autoheader $(TARFILES) uninstall-local: rmdir $(DESTDIR)/$(LOGDIR) || :; if BUILD_LINUX_HA rm -f $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-binaries rm -f $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-directories rm -f $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-returncodes rm -f $(DESTDIR)${OCF_RA_DIR_PREFIX}/heartbeat/.ocf-shellfuncs if BUILD_RGMANAGER rm -f $(DESTDIR)${OCF_RA_DIR_PREFIX}/redhat endif endif BUILT_SOURCES = .version .version: echo $(VERSION) > $@-t && mv $@-t $@ dist-hook: gen-ChangeLog $(SPEC) echo $(VERSION) > $(distdir)/.tarball-version rm -f $(distdir)/$(SPEC) && \ cp $(top_srcdir)/$(SPEC) $(distdir)/$(SPEC) gen_start_date = 2000-01-01 .PHONY: gen-ChangeLog gen-ChangeLog: if test -d .git; then \ LC_ALL=C $(top_srcdir)/make/gitlog-to-changelog \ --since=$(gen_start_date) > $(distdir)/cl-t; \ rm -f $(distdir)/ChangeLog.devel; \ mv $(distdir)/cl-t $(distdir)/ChangeLog.devel; \ fi ## make rpm/srpm section. $(SPEC): $(SPEC).in rm -f $@-t $@ date="$(shell LC_ALL=C date "+%a %b %d %Y")" && \ specver="1" && \ rcver="" && \ dirty="" && \ alphatag="" && \ numcomm="" && \ ver="$(VERSION)" && \ if echo $$ver | grep -q -- "-dirty$$"; then \ dirty="dirty" && \ echo VERSION IS DIRTY && \ ver=`echo $$ver | sed -e "s/-dirty$$//"`; \ fi && \ echo $$ver && \ if echo $$ver | grep -q -- "-"; then \ alphatag=`echo $$ver | sed -e "s/.*-//"` && \ echo VERSION HAS ALPHATAG && \ ver=`echo $$ver | sed -e "s/-.*//"`; \ fi && \ echo $$ver && \ if [ -n "$$alphatag" ]; then \ echo VERSION HAS NUMCOMMITS && \ numcomm=`echo $$ver | sed -e 's/.*\.//'` && \ ver=`echo $$ver | sed -e 's/.'$$numcomm'$$//'`; \ fi && \ if echo $$ver | grep -q "\.[[:digit:]]rc[[:digit:]]"; then \ rpmver=`echo $$ver | sed -e "s/rc[[:digit:]].*//g"` && \ rcver=`echo $$ver | sed -e "s/.*\(rc[[:digit:]]\).*/\1/g"` && \ specver="0"; \ else \ rpmver=$$ver; \ fi && \ echo $$rpmver $$rcver && \ sed \ -e "s#@version@#$$rpmver#g" \ -e "s#@alphatag@#$$alphatag#g" \ -e "s#@numcomm@#$$numcomm#g" \ -e "s#@dirty@#$$dirty#g" \ -e "s#@date@#$$date#g" \ -e "s#@specver@#$$specver#g" \ -e "s#@rcver@#$$rcver#g" \ -e "s#@rgmanager@#$(RGMANAGER)#g" \ -e "s#@linux-ha@#$(LINUX_HA)#g" \ -e "s#@compat-habindir@#$(COMPAT_HABINDIR)#g" \ $< > $@-t; \ if [ -z "$$dirty" ]; then sed -i -e "s#%glo.*dirty.*##g" $@-t; fi; \ if [ -z "$$alphatag" ]; then sed -i -e "s#%glo.*alphatag.*##g" $@-t; fi; \ if [ -z "$$numcomm" ]; then sed -i -e "s#%glo.*numcomm.*##g" $@-t; fi; \ if [ -z "$$rcver" ]; then sed -i -e "s#%glo.*rcver.*##g" $@-t; fi chmod a-w $@-t mv $@-t $@ $(TARFILES): $(MAKE) dist RPMBUILDOPTS = --define "_sourcedir $(abs_builddir)" \ --define "_specdir $(abs_builddir)" \ --define "_builddir $(abs_builddir)" \ --define "_srcrpmdir $(abs_builddir)" \ --define "_rpmdir $(abs_builddir)" srpm: clean $(MAKE) $(SPEC) $(TARFILES) rpmbuild $(RPMBUILDOPTS) --nodeps -bs $(SPEC) rpm: clean $(MAKE) $(SPEC) $(TARFILES) rpmbuild $(RPMBUILDOPTS) -ba $(SPEC) clean-generic: rm -rf $(SPEC) $(TARFILES) diff --git a/configure.ac b/configure.ac index 98c58a895..a050946af 100644 --- a/configure.ac +++ b/configure.ac @@ -1,923 +1,924 @@ dnl dnl autoconf for Agents dnl dnl License: GNU General Public License (GPL) dnl =============================================== dnl Bootstrap dnl =============================================== AC_PREREQ(2.63) dnl Suggested structure: dnl information on the package dnl checks for programs dnl checks for libraries dnl checks for header files dnl checks for types dnl checks for structures dnl checks for compiler characteristics dnl checks for library functions dnl checks for system services AC_INIT([resource-agents], m4_esyscmd([make/git-version-gen .tarball-version]), [to_be_defined@foobar.org]) AC_USE_SYSTEM_EXTENSIONS CRM_DTD_VERSION="1.0" PKG_FEATURES="" AC_CONFIG_AUX_DIR(.) AC_CANONICAL_HOST dnl Where #defines go (e.g. `AC_CHECK_HEADERS' below) dnl dnl Internal header: include/config.h dnl - Contains ALL defines dnl - include/config.h.in is generated automatically by autoheader dnl - NOT to be included in any header files except lha_internal.h dnl (which is also not to be included in any other header files) dnl dnl External header: include/agent_config.h dnl - Contains a subset of defines checked here dnl - Manually edit include/agent_config.h.in to have configure include new defines dnl - Should not include HAVE_* defines dnl - Safe to include anywhere AM_CONFIG_HEADER(include/config.h include/agent_config.h) ALL_LINGUAS="en fr" AC_ARG_WITH(version, [ --with-version=version Override package version (if you're a packager needing to pretend) ], [ PACKAGE_VERSION="$withval" ]) AC_ARG_WITH(pkg-name, [ --with-pkg-name=name Override package name (if you're a packager needing to pretend) ], [ PACKAGE_NAME="$withval" ]) AC_PATH_PROGS(PKGCONFIG, pkg-config) if test x"${PKGCONFIG}" = x""; then AC_MSG_ERROR(You need pkgconfig installed in order to build ${PACKAGE}) fi AC_ARG_WITH([systemdsystemunitdir], [AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files])],, [with_systemdsystemunitdir=auto]) AS_IF([test "x$with_systemdsystemunitdir" = "xyes" -o "x$with_systemdsystemunitdir" = "xauto"], [ def_systemdsystemunitdir=$($PKGCONFIG --variable=systemdsystemunitdir systemd) AS_IF([test "x$def_systemdsystemunitdir" = "x"], [AS_IF([test "x$with_systemdsystemunitdir" = "xyes"], [AC_MSG_ERROR([systemd support requested but pkg-config unable to query systemd package])]) with_systemdsystemunitdir=no], [with_systemdsystemunitdir="$def_systemdsystemunitdir"])]) AS_IF([test "x$with_systemdsystemunitdir" != "xno"], [AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])]) AM_CONDITIONAL([HAVE_SYSTEMD], [test "x$with_systemdsystemunitdir" != "xno"]) dnl dnl AM_INIT_AUTOMAKE([1.11.1 foreign dist-bzip2 dist-xz]) dnl AM_INIT_AUTOMAKE([1.10.1 foreign dist-bzip2]) AC_DEFINE_UNQUOTED(AGENTS_VERSION, "$PACKAGE_VERSION", Current agents version) CC_IN_CONFIGURE=yes export CC_IN_CONFIGURE LDD=ldd dnl ======================================================================== dnl Compiler characteristics dnl ======================================================================== # check stolen from gnulib/m4/gnu-make.m4 if ! ${MAKE-make} --version /cannot/make/this >/dev/null 2>&1; then AC_MSG_ERROR([you don't seem to have GNU make; it is required]) fi AC_PROG_CC dnl Can force other with environment variable "CC". AM_PROG_CC_C_O AC_PROG_CC_STDC AC_PROG_AWK AC_PROG_LN_S AC_PROG_INSTALL AC_PROG_MAKE_SET AC_C_STRINGIZE AC_C_INLINE AC_TYPE_SIZE_T AC_TYPE_SSIZE_T AC_TYPE_UID_T AC_TYPE_UINT16_T AC_TYPE_UINT8_T AC_TYPE_UINT32_T AC_CHECK_SIZEOF(char) AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) AC_CHECK_SIZEOF(long long) AC_STRUCT_TIMEZONE dnl =============================================== dnl Helpers dnl =============================================== cc_supports_flag() { local CPPFLAGS="$@" AC_MSG_CHECKING(whether $CC supports "$@") AC_PREPROC_IFELSE([AC_LANG_PROGRAM([])], [RC=0; AC_MSG_RESULT([yes])], [RC=1; AC_MSG_RESULT([no])]) return $RC } extract_header_define() { AC_MSG_CHECKING(for $2 in $1) Cfile=$srcdir/extract_define.$2.${$} printf "#include \n" > ${Cfile}.c printf "#include <%s>\n" $1 >> ${Cfile}.c printf "int main(int argc, char **argv) { printf(\"%%s\", %s); return 0; }\n" $2 >> ${Cfile}.c $CC $CFLAGS ${Cfile}.c -o ${Cfile} value=`${Cfile}` AC_MSG_RESULT($value) printf $value rm -f ${Cfile}.c ${Cfile} } AC_MSG_NOTICE(Sanitizing prefix: ${prefix}) case $prefix in NONE) prefix=/usr dnl Fix default variables - "prefix" variable if not specified if test "$localstatedir" = "\${prefix}/var"; then localstatedir="/var" fi if test "$sysconfdir" = "\${prefix}/etc"; then sysconfdir="/etc" fi ;; esac dnl =============================================== dnl Configure Options dnl =============================================== dnl Some systems, like Solaris require a custom package name AC_ARG_WITH(pkgname, [ --with-pkgname=name name for pkg (typically for Solaris) ], [ PKGNAME="$withval" ], [ PKGNAME="LXHAhb" ], ) AC_SUBST(PKGNAME) AC_ARG_ENABLE([ansi], [ --enable-ansi force GCC to compile to ANSI/ANSI standard for older compilers. [default=yes]]) AC_ARG_ENABLE([fatal-warnings], [ --enable-fatal-warnings very pedantic and fatal warnings for gcc [default=yes]]) INITDIR="" AC_ARG_WITH(initdir, [ --with-initdir=DIR directory for init (rc) scripts [${INITDIR}]], [ INITDIR="$withval" ]) OCF_ROOT_DIR="${prefix}/lib/ocf" AC_ARG_WITH(ocf-root, [ --with-ocf-root=DIR directory for OCF scripts [${OCF_ROOT_DIR}]], [ OCF_ROOT_DIR="$withval" ]) HA_RSCTMPDIR=${localstatedir}/run/resource-agents AC_ARG_WITH(rsctmpdir, [ --with-rsctmpdir=DIR directory for resource agents state files [${HA_RSCTMPDIR}]], [ HA_RSCTMPDIR="$withval" ]) AC_ARG_ENABLE([libnet], [ --enable-libnet Use libnet for ARP based funcationality, [default=try]], [enable_libnet="$enableval"], [enable_libnet=try]) BUILD_RGMANAGER=0 BUILD_LINUX_HA=0 RASSET=all AC_ARG_WITH(ras-set, [ --with-ras-set=SET build/install only linux-ha or rgmanager resource-agents [default: all]], [ RASSET="$withval" ]) if test x$RASSET = xyes || test x$RASSET = xall ; then BUILD_RGMANAGER=1 BUILD_LINUX_HA=1 fi if test x$RASSET = xlinux-ha; then BUILD_LINUX_HA=1 fi if test x$RASSET = xrgmanager; then BUILD_RGMANAGER=1 fi if test $BUILD_LINUX_HA -eq 0 && test $BUILD_RGMANAGER -eq 0; then AC_MSG_ERROR([Are you really sure you want this package?]) exit 1 fi AM_CONDITIONAL(BUILD_LINUX_HA, test $BUILD_LINUX_HA -eq 1) AM_CONDITIONAL(BUILD_RGMANAGER, test $BUILD_RGMANAGER -eq 1) AC_ARG_WITH(compat-habindir, [ --with-compat-habindir use HA_BIN directory with compatibility for the Heartbeat stack [${libexecdir}]], [], [with_compat_habindir=no]) AM_CONDITIONAL(WITH_COMPAT_HABINDIR, test "x$with_compat_habindir" != "xno") dnl =============================================== dnl General Processing dnl =============================================== echo Our Host OS: $host_os/$host AC_MSG_NOTICE(Sanitizing exec_prefix: ${exec_prefix}) case $exec_prefix in dnl For consistency with Heartbeat, map NONE->$prefix NONE) exec_prefix=$prefix;; prefix) exec_prefix=$prefix;; esac AC_MSG_NOTICE(Sanitizing INITDIR: ${INITDIR}) case $INITDIR in prefix) INITDIR=$prefix;; "") AC_MSG_CHECKING(which init (rc) directory to use) for initdir in /etc/init.d /etc/rc.d/init.d /sbin/init.d \ /usr/local/etc/rc.d /etc/rc.d do if test -d $initdir then INITDIR=$initdir break fi done if test -z $INITDIR then INITDIR=${sysconfdir}/init.d fi AC_MSG_RESULT($INITDIR);; esac AC_SUBST(INITDIR) if test "${prefix}" = "/usr"; then INITDIRPREFIX="$INITDIR" else INITDIRPREFIX="${prefix}/$INITDIR" fi AC_SUBST(INITDIRPREFIX) AC_MSG_NOTICE(Sanitizing libdir: ${libdir}) case $libdir in dnl For consistency with Heartbeat, map NONE->$prefix *prefix*|NONE) AC_MSG_CHECKING(which lib directory to use) for aDir in lib64 lib do trydir="${exec_prefix}/${aDir}" if test -d ${trydir} then libdir=${trydir} break fi done AC_MSG_RESULT($libdir); ;; esac if test "x$with_compat_habindir" != "xno" ; then libexecdir=${libdir} fi dnl Expand autoconf variables so that we dont end up with '${prefix}' dnl in #defines and python scripts dnl NOTE: Autoconf deliberately leaves them unexpanded to allow dnl make exec_prefix=/foo install dnl No longer being able to do this seems like no great loss to me... eval prefix="`eval echo ${prefix}`" eval exec_prefix="`eval echo ${exec_prefix}`" eval bindir="`eval echo ${bindir}`" eval sbindir="`eval echo ${sbindir}`" eval libexecdir="`eval echo ${libexecdir}`" eval datadir="`eval echo ${datadir}`" eval sysconfdir="`eval echo ${sysconfdir}`" eval sharedstatedir="`eval echo ${sharedstatedir}`" eval localstatedir="`eval echo ${localstatedir}`" eval libdir="`eval echo ${libdir}`" eval includedir="`eval echo ${includedir}`" eval oldincludedir="`eval echo ${oldincludedir}`" eval infodir="`eval echo ${infodir}`" eval mandir="`eval echo ${mandir}`" dnl docdir is a recent addition to autotools eval docdir="`eval echo ${docdir}`" if test "x$docdir" = "x"; then docdir="`eval echo ${datadir}/doc`" fi AC_SUBST(docdir) dnl Home-grown variables eval INITDIR="${INITDIR}" for j in prefix exec_prefix bindir sbindir libexecdir datadir sysconfdir \ sharedstatedir localstatedir libdir includedir oldincludedir infodir \ mandir INITDIR docdir do dirname=`eval echo '${'${j}'}'` if test ! -d "$dirname" then AC_MSG_WARN([$j directory ($dirname) does not exist!]) fi done dnl This OS-based decision-making is poor autotools practice; dnl feature-based mechanisms are strongly preferred. dnl dnl So keep this section to a bare minimum; regard as a "necessary evil". REBOOT_OPTIONS="-f" POWEROFF_OPTIONS="-f" case "$host_os" in *bsd*) LIBS="-L/usr/local/lib" CPPFLAGS="$CPPFLAGS -I/usr/local/include" ;; *solaris*) REBOOT_OPTIONS="-n" POWEROFF_OPTIONS="-n" LDFLAGS+=" -lssp -lssp_nonshared" ;; *linux*) AC_DEFINE_UNQUOTED(ON_LINUX, 1, Compiling for Linux platform) POWEROFF_OPTIONS="-nf" REBOOT_OPTIONS="-nf" ;; darwin*) AC_DEFINE_UNQUOTED(ON_DARWIN, 1, Compiling for Darwin platform) LIBS="$LIBS -L${prefix}/lib" CFLAGS="$CFLAGS -I${prefix}/include" ;; esac AC_DEFINE_UNQUOTED(HA_LOG_FACILITY, LOG_DAEMON, Default logging facility) AC_MSG_NOTICE(Host CPU: $host_cpu) case "$host_cpu" in ppc64|powerpc64) case $CFLAGS in *powerpc64*) ;; *) if test "$GCC" = yes; then CFLAGS="$CFLAGS -m64" fi ;; esac esac AC_MSG_CHECKING(which format is needed to print uint64_t) case "$host_cpu" in s390x)U64T="%lu";; *64*) U64T="%lu";; *) U64T="%llu";; esac AC_MSG_RESULT($U64T) AC_DEFINE_UNQUOTED(U64T, "$U64T", Correct printf format for logging uint64_t) dnl Variables needed for substitution AC_CHECK_HEADERS(heartbeat/glue_config.h) if test "$ac_cv_header_heartbeat_glue_config_h" = "yes"; then OCF_ROOT_DIR=`extract_header_define heartbeat/glue_config.h OCF_ROOT_DIR` else enable_libnet=no fi AC_DEFINE_UNQUOTED(OCF_ROOT_DIR,"$OCF_ROOT_DIR", OCF root directory - specified by the OCF standard) AC_SUBST(OCF_ROOT_DIR) GLUE_STATE_DIR=${localstatedir}/run AC_DEFINE_UNQUOTED(GLUE_STATE_DIR,"$GLUE_STATE_DIR", Where to keep state files and sockets) AC_SUBST(GLUE_STATE_DIR) AC_DEFINE_UNQUOTED(HA_VARRUNDIR,"$GLUE_STATE_DIR", Where Heartbeat keeps state files and sockets - old name) HA_VARRUNDIR="$GLUE_STATE_DIR" AC_SUBST(HA_VARRUNDIR) # Expand $prefix eval HA_RSCTMPDIR="`eval echo ${HA_RSCTMPDIR}`" AC_DEFINE_UNQUOTED(HA_RSCTMPDIR,"$HA_RSCTMPDIR", Where Resouce agents keep state files) AC_SUBST(HA_RSCTMPDIR) dnl Eventually move out of the heartbeat dir tree and create symlinks when needed HA_VARLIBHBDIR=${localstatedir}/lib/heartbeat AC_DEFINE_UNQUOTED(HA_VARLIBHBDIR,"$HA_VARLIBHBDIR", Whatever this used to mean) AC_SUBST(HA_VARLIBHBDIR) OCF_RA_DIR="${OCF_ROOT_DIR}/resource.d" AC_DEFINE_UNQUOTED(OCF_RA_DIR,"$OCF_RA_DIR", Location for OCF RAs) AC_SUBST(OCF_RA_DIR) OCF_RA_DIR_PREFIX="$OCF_RA_DIR" AC_SUBST(OCF_RA_DIR_PREFIX) OCF_LIB_DIR="${OCF_ROOT_DIR}/lib" AC_DEFINE_UNQUOTED(OCF_LIB_DIR,"$OCF_LIB_DIR", Location for shared code for OCF RAs) AC_SUBST(OCF_LIB_DIR) OCF_LIB_DIR_PREFIX="$OCF_LIB_DIR" AC_SUBST(OCF_LIB_DIR_PREFIX) dnl =============================================== dnl rgmanager ras bits dnl =============================================== LOGDIR=${localstatedir}/log/cluster CLUSTERDATA=${datadir}/cluster AC_SUBST([LOGDIR]) AC_SUBST([CLUSTERDATA]) dnl =============================================== dnl Program Paths dnl =============================================== PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin" export PATH AM_PATH_PYTHON AC_CHECK_PROGS(MAKE, gmake make) AC_PATH_PROGS(SSH, ssh, /usr/bin/ssh) AC_PATH_PROGS(SCP, scp, /usr/bin/scp) AC_PATH_PROGS(TAR, tar) AC_PATH_PROGS(MD5, md5) AC_PATH_PROGS(TEST, test) AC_PATH_PROGS(PING, ping, /bin/ping) AC_PATH_PROGS(IFCONFIG, ifconfig, /sbin/ifconfig) AC_PATH_PROGS(MAILCMD, mailx mail, mail) AC_PATH_PROGS(EGREP, egrep) AC_SUBST(MAILCMD) AC_SUBST(EGREP) AC_SUBST(SHELL) AC_SUBST(PING) AC_SUBST(TEST) AC_PATH_PROGS(ROUTE, route) AC_DEFINE_UNQUOTED(ROUTE, "$ROUTE", path to route command) AC_MSG_CHECKING(ifconfig option to list interfaces) for IFCONFIG_A_OPT in "-A" "-a" "" do $IFCONFIG $IFCONFIG_A_OPT > /dev/null 2>&1 if test "$?" = 0 then AC_DEFINE_UNQUOTED(IFCONFIG_A_OPT, "$IFCONFIG_A_OPT", option for ifconfig command) AC_MSG_RESULT($IFCONFIG_A_OPT) break fi done AC_SUBST(IFCONFIG_A_OPT) if test x"${MAKE}" = x""; then AC_MSG_ERROR(You need (g)make installed in order to build ${PACKAGE}) fi dnl =============================================== dnl Libraries dnl =============================================== AC_CHECK_LIB(socket, socket) AC_CHECK_LIB(gnugetopt, getopt_long) dnl if available if test "x${enable_thread_safe}" = "xyes"; then GPKGNAME="gthread-2.0" else GPKGNAME="glib-2.0" fi if $PKGCONFIG --exists $GPKGNAME then GLIBCONFIG="$PKGCONFIG $GPKGNAME" else set -x echo PKG_CONFIG_PATH=$PKG_CONFIG_PATH $PKGCONFIG --exists $GPKGNAME; echo $? $PKGCONFIG --cflags $GPKGNAME; echo $? $PKGCONFIG $GPKGNAME; echo $? set +x AC_MSG_ERROR(You need glib2-devel installed in order to build ${PACKAGE}) fi AC_MSG_RESULT(using $GLIBCONFIG) if test "X$GLIBCONFIG" != X; then AC_MSG_CHECKING(for special glib includes: ) GLIBHEAD=`$GLIBCONFIG --cflags` AC_MSG_RESULT($GLIBHEAD) CPPFLAGS="$CPPFLAGS $GLIBHEAD" AC_MSG_CHECKING(for glib library flags) GLIBLIB=`$GLIBCONFIG --libs` AC_MSG_RESULT($GLIBLIB) LIBS="$LIBS $GLIBLIB" fi dnl ======================================================================== dnl Headers dnl ======================================================================== AC_HEADER_STDC AC_CHECK_HEADERS(sys/socket.h) AC_CHECK_HEADERS(sys/sockio.h) AC_CHECK_HEADERS([arpa/inet.h]) AC_CHECK_HEADERS([fcntl.h]) AC_CHECK_HEADERS([limits.h]) AC_CHECK_HEADERS([malloc.h]) AC_CHECK_HEADERS([netdb.h]) AC_CHECK_HEADERS([netinet/in.h]) AC_CHECK_HEADERS([sys/file.h]) AC_CHECK_HEADERS([sys/ioctl.h]) AC_CHECK_HEADERS([sys/param.h]) AC_CHECK_HEADERS([sys/time.h]) AC_CHECK_HEADERS([syslog.h]) dnl ======================================================================== dnl Functions dnl ======================================================================== AC_FUNC_FORK AC_FUNC_STRNLEN AC_CHECK_FUNCS([alarm gettimeofday inet_ntoa memset mkdir socket uname]) AC_CHECK_FUNCS([strcasecmp strchr strdup strerror strrchr strspn strstr strtol strtoul]) AC_PATH_PROGS(REBOOT, reboot, /sbin/reboot) AC_SUBST(REBOOT) AC_SUBST(REBOOT_OPTIONS) AC_DEFINE_UNQUOTED(REBOOT, "$REBOOT", path to the reboot command) AC_DEFINE_UNQUOTED(REBOOT_OPTIONS, "$REBOOT_OPTIONS", reboot options) AC_PATH_PROGS(POWEROFF_CMD, poweroff, /sbin/poweroff) AC_SUBST(POWEROFF_CMD) AC_SUBST(POWEROFF_OPTIONS) AC_DEFINE_UNQUOTED(POWEROFF_CMD, "$POWEROFF_CMD", path to the poweroff command) AC_DEFINE_UNQUOTED(POWEROFF_OPTIONS, "$POWEROFF_OPTIONS", poweroff options) AC_PATH_PROGS(XSLTPROC, xsltproc) AM_CONDITIONAL(BUILD_DOC, test "x$XSLTPROC" != "x" ) if test "x$XSLTPROC" = "x"; then AC_MSG_WARN([xsltproc not installed, unable to (re-)build manual pages]) fi AC_SUBST(XSLTPROC) AC_PATH_PROGS(POD2MAN, pod2man) AM_CONDITIONAL(BUILD_POD_DOC, test "x$POD2MAN" != "x" ) if test "x$POD2MAN" = "x"; then AC_MSG_WARN([pod2man not installed, unable to (re-)build ldirector manual page]) fi AC_SUBST(POD2MAN) dnl ======================================================================== dnl Functions dnl ======================================================================== AC_CHECK_FUNCS(getopt, AC_DEFINE(HAVE_DECL_GETOPT, 1, [Have getopt function])) dnl ======================================================================== dnl sfex dnl ======================================================================== build_sfex=no case $host_os in *Linux*|*linux*) if test "$ac_cv_header_heartbeat_glue_config_h" = "yes"; then build_sfex=yes fi ;; esac AM_CONDITIONAL(BUILD_SFEX, test "$build_sfex" = "yes" ) dnl ======================================================================== dnl tickle (needs port to BSD platforms) dnl ======================================================================== AC_CHECK_MEMBERS([struct iphdr.saddr],,,[[#include ]]) AM_CONDITIONAL(BUILD_TICKLE, test "$ac_cv_member_struct_iphdr_saddr" = "yes" ) dnl ======================================================================== dnl libnet dnl ======================================================================== libnet="" libnet_version="none" LIBNETLIBS="" LIBNETDEFINES="" AC_MSG_CHECKING(if libnet is required) libnet_fatal=$enable_libnet case $enable_libnet in no) ;; yes|libnet10|libnet11|10|11) libnet_fatal=yes;; try) case $host_os in *Linux*|*linux*) libnet_fatal=no;; *) libnet_fatal=yes;; dnl legacy behavior esac ;; *) libnet_fatal=yes; enable_libnet=try;; esac AC_MSG_RESULT($libnet_fatal) if test "x$enable_libnet" != "xno"; then AC_PATH_PROGS(LIBNETCONFIG, libnet-config) AC_CHECK_LIB(nsl, t_open) dnl -lnsl AC_CHECK_LIB(socket, socket) dnl -lsocket AC_CHECK_LIB(net, libnet_get_hwaddr, LIBNETLIBS=" -lnet", []) fi AC_MSG_CHECKING(for libnet) if test "x$LIBNETLIBS" != "x" -o "x$enable_libnet" = "xlibnet11"; then LIBNETDEFINES="" if test "$ac_cv_lib_nsl_t_open" = yes; then LIBNETLIBS="-lnsl $LIBNETLIBS" fi if test "$ac_cv_lib_socket_socket" = yes; then LIBNETLIBS="-lsocket $LIBNETLIBS" fi libnet=net libnet_version="libnet1.1" fi if test "x$enable_libnet" = "xtry" -o "x$enable_libnet" = "xlibnet10"; then if test "x$LIBNETLIBS" = x -a "x${LIBNETCONFIG}" != "x" ; then LIBNETDEFINES="`$LIBNETCONFIG --defines` `$LIBNETCONFIG --cflags`"; LIBNETLIBS="`$LIBNETCONFIG --libs`"; libnet_version="libnet1.0 (old)" case $LIBNETLIBS in *-l*) libnet=`echo $LIBNETLIBS | sed 's%.*-l%%'`;; *) libnet_version=none;; esac CPPFLAGS="$CPPFLAGS $LIBNETDEFINES" AC_CHECK_HEADERS(libnet.h) if test "$ac_cv_header_libnet_h" = no; then libnet_version=none fi fi fi AC_MSG_RESULT(found $libnet_version) if test "$libnet_version" = none; then LIBNETLIBS="" LIBNETDEFINES="" if test $libnet_fatal = yes; then AC_MSG_ERROR(libnet not found) fi else AC_CHECK_LIB($libnet,libnet_init, [new_libnet=yes; AC_DEFINE(HAVE_LIBNET_1_1_API, 1, Libnet 1.1 API)], [new_libnet=no; AC_DEFINE(HAVE_LIBNET_1_0_API, 1, Libnet 1.0 API)],$LIBNETLIBS) AC_SUBST(LIBNETLIBS) fi if test "$new_libnet" = yes; then AC_MSG_CHECKING(for libnet API 1.1.4: ) save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fgnu89-inline -Wall -Werror" AC_COMPILE_IFELSE([ AC_LANG_SOURCE(#include int main(){libnet_t *l=NULL; libnet_pblock_record_ip_offset(l, l->total_size); return(0); })], [AC_MSG_RESULT(no)], [AC_DEFINE(HAVE_LIBNET_1_1_4_API, 1, Libnet 1.1.4 API) AC_MSG_RESULT(yes)]) CFLAGS="$save_CFLAGS" fi sendarp_linux=0 case $host_os in *Linux*|*linux*) sendarp_linux=1;; esac AC_SUBST(LIBNETLIBS) AC_SUBST(LIBNETDEFINES) AM_CONDITIONAL(SENDARP_LINUX, test $sendarp_linux = 1 ) AM_CONDITIONAL(USE_LIBNET, test "x$libnet_version" != "xnone" ) dnl ************************************************************************ dnl * Check for netinet/icmp6.h to enable the IPv6addr resource agent AC_CHECK_HEADERS(netinet/icmp6.h,[],[],[#include ]) AM_CONDITIONAL(USE_IPV6ADDR_AGENT, test "$ac_cv_header_netinet_icmp6_h" = yes && test "$ac_cv_header_heartbeat_glue_config_h" = yes) AM_CONDITIONAL(IPV6ADDR_COMPATIBLE, test "$ac_cv_header_netinet_icmp6_h" = yes) dnl ======================================================================== dnl Compiler flags dnl ======================================================================== dnl Make sure that CFLAGS is not exported. If the user did dnl not have CFLAGS in their environment then this should have dnl no effect. However if CFLAGS was exported from the user's dnl environment, then the new CFLAGS will also be exported dnl to sub processes. CC_ERRORS="" CC_EXTRAS="" if export -p | fgrep " CFLAGS=" > /dev/null; then SAVED_CFLAGS="$CFLAGS" unset CFLAGS CFLAGS="$SAVED_CFLAGS" unset SAVED_CFLAGS fi if test "$GCC" != yes; then CFLAGS="$CFLAGS -g" enable_fatal_warnings=no else CFLAGS="$CFLAGS -ggdb3" # We had to eliminate -Wnested-externs because of libtool changes # Also remove -Waggregate-return because we use one libnet # call which returns a struct EXTRA_FLAGS="-fgnu89-inline -fstack-protector-all -Wall -Wbad-function-cast -Wcast-qual -Wcast-align -Wdeclaration-after-statement -Wendif-labels -Wfloat-equal -Wformat=2 -Wformat-security -Wformat-nonliteral -Winline -Wmissing-prototypes -Wmissing-declarations -Wmissing-format-attribute -Wnested-externs -Wno-long-long -Wno-strict-aliasing -Wpointer-arith -Wstrict-prototypes -Wunsigned-char -Wwrite-strings" # Additional warnings it might be nice to enable one day # -Wshadow # -Wunreachable-code for j in $EXTRA_FLAGS do if cc_supports_flag $j then CC_EXTRAS="$CC_EXTRAS $j" fi done dnl In lib/ais/Makefile.am there's a gcc option available as of v4.x GCC_MAJOR=`gcc -v 2>&1 | awk 'END{print $3}' | sed 's/[.].*//'` AM_CONDITIONAL(GCC_4, test "${GCC_MAJOR}" = 4) dnl System specific options case "$host_os" in *linux*|*bsd*) if test "${enable_fatal_warnings}" = "unknown"; then enable_fatal_warnings=yes fi ;; esac if test "x${enable_fatal_warnings}" != xno && cc_supports_flag -Werror ; then enable_fatal_warnings=yes else enable_fatal_warnings=no fi if test "x${enable_ansi}" != xno && cc_supports_flag -std=iso9899:199409 ; then AC_MSG_NOTICE(Enabling ANSI Compatibility) CC_EXTRAS="$CC_EXTRAS -ansi -D_GNU_SOURCE -DANSI_ONLY" fi AC_MSG_NOTICE(Activated additional gcc flags: ${CC_EXTRAS}) fi CFLAGS="$CFLAGS $CC_EXTRAS" NON_FATAL_CFLAGS="$CFLAGS" AC_SUBST(NON_FATAL_CFLAGS) dnl dnl We reset CFLAGS to include our warnings *after* all function dnl checking goes on, so that our warning flags don't keep the dnl AC_*FUNCS() calls above from working. In particular, -Werror will dnl *always* cause us troubles if we set it before here. dnl dnl if test "x${enable_fatal_warnings}" = xyes ; then AC_MSG_NOTICE(Enabling Fatal Warnings) CFLAGS="$CFLAGS -Werror" fi AC_SUBST(CFLAGS) dnl This is useful for use in Makefiles that need to remove one specific flag CFLAGS_COPY="$CFLAGS" AC_SUBST(CFLAGS_COPY) AC_SUBST(LOCALE) AC_SUBST(CC) AC_SUBST(MAKE) dnl The Makefiles and shell scripts we output AC_CONFIG_FILES(Makefile \ include/Makefile \ heartbeat/Makefile \ heartbeat/ocf-binaries \ heartbeat/ocf-directories \ heartbeat/ocf-shellfuncs \ heartbeat/shellfuncs \ +systemd/Makefile \ tools/Makefile \ tools/ocf-tester \ tools/ocft/Makefile \ tools/ocft/ocft \ tools/ocft/caselib \ tools/ocft/README \ tools/ocft/README.zh_CN \ ldirectord/Makefile \ ldirectord/ldirectord \ ldirectord/init.d/Makefile \ ldirectord/init.d/ldirectord \ ldirectord/init.d/ldirectord.debian \ ldirectord/init.d/ldirectord.debian.default \ ldirectord/systemd/Makefile \ ldirectord/systemd/ldirectord.service \ ldirectord/logrotate.d/Makefile \ ldirectord/OCF/Makefile \ ldirectord/OCF/ldirectord \ doc/Makefile \ doc/man/Makefile \ rgmanager/Makefile \ rgmanager/src/Makefile \ rgmanager/src/resources/Makefile \ rgmanager/src/resources/utils/Makefile \ ) dnl Now process the entire list of files added by previous dnl calls to AC_CONFIG_FILES() AC_OUTPUT() dnl ***************** dnl Configure summary dnl ***************** AC_MSG_RESULT([]) AC_MSG_RESULT([$PACKAGE configuration:]) AC_MSG_RESULT([ Version = ${VERSION}]) AC_MSG_RESULT([ Build Version = $Format:%H$]) AC_MSG_RESULT([ Features =${PKG_FEATURES}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ Prefix = ${prefix}]) AC_MSG_RESULT([ Executables = ${sbindir}]) AC_MSG_RESULT([ Man pages = ${mandir}]) AC_MSG_RESULT([ Libraries = ${libdir}]) AC_MSG_RESULT([ Header files = ${includedir}]) AC_MSG_RESULT([ Arch-independent files = ${datadir}]) AC_MSG_RESULT([ Documentation = ${docdir}]) AC_MSG_RESULT([ State information = ${localstatedir}]) AC_MSG_RESULT([ System configuration = ${sysconfdir}]) AC_MSG_RESULT([ HA_BIN directory prefix = ${libexecdir}]) AC_MSG_RESULT([ RA state files = ${HA_RSCTMPDIR}]) AC_MSG_RESULT([ AIS Plugins = ${LCRSODIR}]) AC_MSG_RESULT([]) AC_MSG_RESULT([ CFLAGS = ${CFLAGS}]) AC_MSG_RESULT([ Libraries = ${LIBS}]) AC_MSG_RESULT([ Stack Libraries = ${CLUSTERLIBS}]) diff --git a/heartbeat/LVM b/heartbeat/LVM index 5b265f58f..4b9a4e7c4 100755 --- a/heartbeat/LVM +++ b/heartbeat/LVM @@ -1,734 +1,740 @@ #!/bin/sh # # # LVM # # Description: Manages an LVM volume as an HA resource # # # Author: Alan Robertson # Support: users@clusterlabs.org # License: GNU General Public License (GPL) # Copyright: (C) 2002 - 2005 International Business Machines, Inc. # # This code significantly inspired by the LVM resource # in FailSafe by Lars Marowsky-Bree # # # An example usage in /etc/ha.d/haresources: # node1 10.0.0.170 ServeRAID::1::1 LVM::myvolname # # See usage() function below for more details... # # OCF parameters are as below: # OCF_RESKEY_volgrpname # ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs OCF_RESKEY_check_writethrough_default="false" ####################################################################### usage() { methods=`LVM_methods` methods=`echo $methods | tr ' ' '|'` cat < 1.0 Resource script for LVM. It manages an Linux Volume Manager volume (LVM) as an HA resource. Controls the availability of an LVM Volume Group The name of volume group. Volume group name If set, the volume group will be activated exclusively. This option works one of two ways. If the volume group has the cluster attribute set, then the volume group will be activated exclusively using clvmd across the cluster. If the cluster attribute is not set, the volume group will be activated exclusively using a tag and the volume_list filter. When the tag option is in use, the volume_list in lvm.con must be initialized. This can be as simple as setting 'volume_list = []' depending on your setup. Exclusive activation If "exclusive" is set on a non clustered volume group, this overrides the tag to be used. Exclusive activation tag If set, the volume group will be activated partially even with some physical volumes missing. It helps to set to true when using mirrored logical volumes. Activate VG partially when missing PVs If set to true, check if cache_mode is set to writethrough. Check if cache_mode is set to writethrough EOF } # # methods: What methods/operations do we support? # LVM_methods() { cat < /dev/null 2>&1 if [ $? -ne 0 ]; then return fi ## # Now check to see if the initrd has been updated. # If not, the machine could boot and activate the VG outside # the control of pacemaker ## if [ "$(find /boot -name *.img -newer /etc/lvm/lvm.conf)" = "" ]; then ocf_log warn "LVM: Improper setup detected" ocf_log warn "* initrd image needs to be newer than lvm.conf" # While dangerous if not done the first time, there are many # cases where we don't simply want to fail here. Instead, # keep warning until the user remakes the initrd - or has # it done for them by upgrading the kernel. # # initrd can be updated using this command. # dracut -H -f /boot/initramfs-$(uname -r).img $(uname -r) # fi } ## # does this vg have our tag ## check_tags() { local owner=`vgs -o tags --noheadings $OCF_RESKEY_volgrpname | tr -d ' '` if [ -z "$owner" ]; then # No-one owns this VG yet return 1 fi if [ "$OUR_TAG" = "$owner" ]; then # yep, this is ours return 0 fi # some other tag is set on this vg return 2 } strip_tags() { local i for i in `vgs --noheadings -o tags $OCF_RESKEY_volgrpname | sed s/","/" "/g`; do ocf_log info "Stripping tag, $i" # LVM version 2.02.98 allows changing tags if PARTIAL vgchange --deltag $i $OCF_RESKEY_volgrpname done if [ ! -z `vgs -o tags --noheadings $OCF_RESKEY_volgrpname | tr -d ' '` ]; then ocf_exit_reason "Failed to remove ownership tags from $OCF_RESKEY_volgrpname" return $OCF_ERR_GENERIC fi return $OCF_SUCCESS } set_tags() { check_tags case $? in 0) # we already own it. return $OCF_SUCCESS ;; 2) # other tags are set, strip them before setting if ! strip_tags; then return $OCF_ERR_GENERIC fi ;; *) : ;; esac vgchange --addtag $OUR_TAG $OCF_RESKEY_volgrpname if [ $? -ne 0 ]; then ocf_exit_reason "Failed to add ownership tag to $OCF_RESKEY_volgrpname" return $OCF_ERR_GENERIC fi ocf_log info "New tag \"$OUR_TAG\" added to $OCF_RESKEY_volgrpname" return $OCF_SUCCESS } # # Return LVM status (silently) # LVM_status() { local rc=1 loglevel="debug" # Set the log level of the error message if [ "X${2}" = "X" ]; then loglevel="err" if ocf_is_probe; then loglevel="warn" else if [ ${OP_METHOD} = "stop" ]; then loglevel="info" fi fi fi if [ -d /dev/$1 ]; then test "`cd /dev/$1 && ls`" != "" rc=$? if [ $rc -ne 0 ]; then ocf_exit_reason "VG $1 with no logical volumes is not supported by this RA!" fi fi if [ $rc -ne 0 ]; then ocf_log $loglevel "LVM Volume $1 is not available (stopped)" rc=$OCF_NOT_RUNNING else case $(get_vg_mode) in 1) # exclusive with tagging. # If vg is running, make sure the correct tag is present. Otherwise we # can not guarantee exclusive activation. if ! check_tags; then ocf_exit_reason "WARNING: $OCF_RESKEY_volgrpname is active without the cluster tag, \"$OUR_TAG\"" rc=$OCF_ERR_GENERIC fi # make sure the environment for tags activation is still valid if ! verify_tags_environment; then rc=$OCF_ERR_GENERIC fi # let the user know if their initrd is older than lvm.conf. check_initrd_warning ;; *) : ;; esac fi if [ "X${2}" = "X" ]; then # status call return return $rc fi # Report on LVM volume status to stdout... if [ $rc -eq 0 ]; then echo "Volume $1 is available (running)" else echo "Volume $1 is not available (stopped)" fi return $rc } get_activate_options() { local options="-a" case $(get_vg_mode) in 0) options="${options}ly";; 1) options="${options}y --config activation{volume_list=[\"@${OUR_TAG}\"]}";; 2) options="${options}ey";; esac if ocf_is_true "$OCF_RESKEY_partial_activation" ; then options="${options} --partial" fi # for clones (clustered volume groups), we'll also have to force # monitoring, even if disabled in lvm.conf. if ocf_is_clone; then options="$options --monitor y" fi echo $options } ## # Attempt to deactivate vg cluster wide and then start the vg exclusively ## retry_exclusive_start() { local vgchange_options="$(get_activate_options)" # Deactivate each LV in the group one by one cluster wide set -- $(lvs -o name,attr --noheadings $OCF_RESKEY_volgrpname 2> /dev/null) while [ $# -ge 2 ]; do case $2 in ????ao*) # open LVs cannot be deactivated. return $OCF_ERR_GENERIC;; *) if ! lvchange -an $OCF_RESKEY_volgrpname/$1; then ocf_exit_reason "Unable to perform required deactivation of $OCF_RESKEY_volgrpname/$1 before starting" return $OCF_ERR_GENERIC fi ;; esac shift 2 done ocf_run vgchange $vgchange_options $OCF_RESKEY_volgrpname } # # Enable LVM volume # LVM_start() { local vgchange_options="$(get_activate_options)" local vg=$1 local clvmd=0 + # systemd drop-in to stop process before storage services during + # shutdown/reboot + if ps -p 1 | grep -q systemd ; then + systemd_drop_in "99-LVM" "After" "blk-availability.service" + fi + # TODO: This MUST run vgimport as well ocf_log info "Activating volume group $vg" if [ "$LVM_MAJOR" -eq "1" ]; then ocf_run vgscan $vg else ocf_run vgscan fi case $(get_vg_mode) in 2) clvmd=1 ;; 1) if ! set_tags; then return $OCF_ERR_GENERIC fi ;; *) : ;; esac if ! ocf_run vgchange $vgchange_options $vg; then if [ $clvmd -eq 0 ]; then return $OCF_ERR_GENERIC fi # Failure to exclusively activate cluster vg.: # This could be caused by a remotely active LV, Attempt # to disable volume group cluster wide and try again. # Allow for some settling sleep 5 if ! retry_exclusive_start; then return $OCF_ERR_GENERIC fi fi if LVM_status $vg; then : OK Volume $vg activated just fine! return $OCF_SUCCESS else ocf_exit_reason "LVM: $vg did not activate correctly" return $OCF_NOT_RUNNING fi } # # Disable the LVM volume # LVM_stop() { local res=$OCF_ERR_GENERIC local vgchange_options="-aln" local vg=$1 if ! vgs $vg > /dev/null 2>&1; then ocf_log info "Volume group $vg not found" return $OCF_SUCCESS fi ocf_log info "Deactivating volume group $vg" case $(get_vg_mode) in 1) vgchange_options="-an" ;; esac for i in $(seq 10) do ocf_run vgchange $vgchange_options $vg res=$? if LVM_status $vg; then ocf_exit_reason "LVM: $vg did not stop correctly" res=1 fi if [ $res -eq 0 ]; then break fi res=$OCF_ERR_GENERIC ocf_log warn "$vg still Active" ocf_log info "Retry deactivating volume group $vg" sleep 1 which udevadm > /dev/null 2>&1 && udevadm settle --timeout=5 done case $(get_vg_mode) in 1) if [ $res -eq 0 ]; then strip_tags res=$? fi ;; esac return $res } # # Check whether the OCF instance parameters are valid # LVM_validate_all() { check_binary $AWK ## # lvmetad is a daemon that caches lvm metadata to improve the # performance of LVM commands. This daemon should never be used when # volume groups exist that are being managed by the cluster. The lvmetad # daemon introduces a response lag, where certain LVM commands look like # they have completed (like vg activation) when in fact the command # is still in progress by the lvmetad. This can cause reliability issues # when managing volume groups in the cluster. For Example, if you have a # volume group that is a dependency for another application, it is possible # the cluster will think the volume group is activated and attempt to start # the application before volume group is really accesible... lvmetad is bad. ## lvm dumpconfig global/use_lvmetad | grep 'use_lvmetad.*=.*1' > /dev/null 2>&1 if [ $? -eq 0 ]; then # for now warn users that lvmetad is enabled and that they should disable it. In the # future we may want to consider refusing to start, or killing the lvmetad daemon. ocf_log warn "Disable lvmetad in lvm.conf. lvmetad should never be enabled in a clustered environment. Set use_lvmetad=0 and kill the lvmetad process" fi ## # Off-the-shelf tests... ## VGOUT=`vgck ${VOLUME} 2>&1` if [ $? -ne 0 ]; then # Inconsistency might be due to missing physical volumes, which doesn't # automatically mean we should fail. If partial_activation=true then # we should let start try to handle it, or if no PVs are listed as # "unknown device" then another node may have marked a device missing # where we have access to all of them and can start without issue. if vgs -o pv_attr --noheadings $OCF_RESKEY_volgrpname 2>/dev/null | grep 'm' > /dev/null 2>&1; then case $(vgs -o attr --noheadings $OCF_RESKEY_volgrpname | tr -d ' ') in ???p??*) if ! ocf_is_true "$OCF_RESKEY_partial_activation" ; then # We are missing devices and cannot activate partially ocf_exit_reason "Volume group [$VOLUME] has devices missing. Consider partial_activation=true to attempt to activate partially" exit $OCF_ERR_GENERIC else # We are missing devices but are allowed to activate partially. # Assume that caused the vgck failure and carry on ocf_log warn "Volume group inconsistency detected with missing device(s) and partial_activation enabled. Proceeding with requested action." fi ;; esac # else the vg is partial but all devices are accounted for, so another # node must have marked the device missing. Proceed. else # vgck failure was for something other than missing devices ocf_exit_reason "Volume group [$VOLUME] does not exist or contains error! ${VGOUT}" exit $OCF_ERR_GENERIC fi fi ## # Does the Volume Group exist? ## if [ "$LVM_MAJOR" = "1" ]; then VGOUT=`vgdisplay ${VOLUME} 2>&1` else VGOUT=`vgdisplay -v ${VOLUME} 2>&1` fi if [ $? -ne 0 ]; then ocf_exit_reason "Volume group [$VOLUME] does not exist or contains error! ${VGOUT}" exit $OCF_ERR_GENERIC fi if ocf_is_true "$OCF_RESKEY_check_writethrough"; then if ! lvs --noheadings -o cache_mode "$OCF_RESKEY_volgrpname" | grep -q "writethrough"; then ocf_exit_reason "LVM cache is not in writethrough mode." exit $OCF_ERR_CONFIGURED fi fi ## # If exclusive activation is not enabled, then # further checking of proper setup is not necessary ## if ! ocf_is_true "$OCF_RESKEY_exclusive"; then return $OCF_SUCCESS; fi ## # Having cloned lvm resources with exclusive vg activation makes no sense at all. ## if ocf_is_clone; then ocf_exit_reason "cloned lvm resources can not be activated exclusively" exit $OCF_ERR_CONFIGURED fi ## # Make sure the cluster attribute is set and clvmd is up when exclusive # activation is enabled. Otherwise we can't exclusively activate the volume group. ## case $(get_vg_mode) in 1) # exclusive activation using tags if ! verify_tags_environment; then exit $OCF_ERR_GENERIC fi ;; 2) # exclusive activation with clvmd ## # verify is clvmd running ## if ! ps -C clvmd > /dev/null 2>&1; then ocf_exit_reason "$OCF_RESKEY_volgrpname has the cluster attribute set, but 'clvmd' is not running" exit $OCF_ERR_GENERIC fi ;; *) : ;; esac return $OCF_SUCCESS } # # 'main' starts here... # if [ $# -ne 1 ] then usage exit $OCF_ERR_ARGS fi case $1 in meta-data) meta_data exit $OCF_SUCCESS;; methods) LVM_methods exit $?;; usage) usage exit $OCF_SUCCESS;; *) ;; esac if [ -z "$OCF_RESKEY_volgrpname" ] then ocf_exit_reason "You must identify the volume group name!" exit $OCF_ERR_CONFIGURED fi # Get the LVM version number, for this to work we assume(thanks to panjiam): # # LVM1 outputs like this # # # vgchange --version # vgchange: Logical Volume Manager 1.0.3 # Heinz Mauelshagen, Sistina Software 19/02/2002 (IOP 10) # # LVM2 and higher versions output in this format # # # vgchange --version # LVM version: 2.00.15 (2004-04-19) # Library version: 1.00.09-ioctl (2004-03-31) # Driver version: 4.1.0 LVM_VERSION=`vgchange --version 2>&1 | \ $AWK '/Logical Volume Manager/ {print $5"\n"; exit; } /LVM version:/ {printf $3"\n"; exit;}'` rc=$? if ( [ $rc -ne 0 ] || [ -z "$LVM_VERSION" ] ) then ocf_exit_reason "LVM: $1 could not determine LVM version. Try 'vgchange --version' manually and modify $0 ?" exit $OCF_ERR_INSTALLED fi LVM_MAJOR="${LVM_VERSION%%.*}" VOLUME=$OCF_RESKEY_volgrpname OP_METHOD=$1 if [ -n "$OCF_RESKEY_tag" ]; then OUR_TAG=$OCF_RESKEY_tag fi : ${OCF_RESKEY_check_writethrough=${OCF_RESKEY_check_writethrough_default}} # What kind of method was invoked? case "$1" in start) LVM_validate_all LVM_start $VOLUME exit $?;; stop) LVM_stop $VOLUME exit $?;; status) LVM_status $VOLUME $1 exit $?;; monitor) LVM_status $VOLUME exit $?;; validate-all) LVM_validate_all ;; *) usage exit $OCF_ERR_UNIMPLEMENTED;; esac diff --git a/heartbeat/clvm b/heartbeat/clvm index 8eae6c32c..43b930287 100755 --- a/heartbeat/clvm +++ b/heartbeat/clvm @@ -1,427 +1,433 @@ #!/bin/bash # # Copyright (c) 2014 David Vossel # All Rights Reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it would be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # Further, this software is distributed without any warranty that it is # free of the rightful claim of any third person regarding infringement # or the like. Any license provided herein, whether implied or # otherwise, applies only to this software file. Patent licenses, if # any, provided herein do not apply to combinations of this program with # other software, or any other product whatsoever. # # You should have received a copy of the GNU General Public License # along with this program; if not, write the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. # ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs . ${OCF_FUNCTIONS_DIR}/ocf-directories ####################################################################### meta_data() { cat < 1.0 This agent manages the clvmd daemon. clvmd Start with cmirrord (cluster mirror log daemon). activate cmirrord Options to clvmd. Refer to clvmd.8 for detailed descriptions. Daemon Options Whether or not to activate all cluster volume groups after starting the clvmd or not. Note that clustered volume groups will always be deactivated before the clvmd stops regardless of what this option is set to. Activate volume groups END } ####################################################################### : ${OCF_RESKEY_daemon_options:="-d0"} : ${OCF_RESKEY_activate_vgs:="true"} sbindir=$HA_SBIN_DIR if [ -z $sbindir ]; then sbindir=/usr/sbin fi DAEMON="clvmd" CMIRROR="cmirrord" DAEMON_PATH="${sbindir}/clvmd" CMIRROR_PATH="${sbindir}/cmirrord" LVMCONF="${sbindir}/lvmconf" LOCK_FILE="/var/lock/subsys/$DAEMON" # attempt to detect where the vg tools are located # for some reason this isn't consistent with sbindir # in some distros. vgtoolsdir=$(dirname $(which vgchange 2> /dev/null) 2> /dev/null) if [ -z "$vgtoolsdir" ]; then vgtoolsdir="$sbindir" fi LVM_VGCHANGE=${vgtoolsdir}/vgchange LVM_VGDISPLAY=${vgtoolsdir}/vgdisplay LVM_VGSCAN=${vgtoolsdir}/vgscan # Leaving this in for legacy. We do not want to advertize # the abilty to set options in the systconfig exists, we want # to expand the OCF style options as necessary instead. [ -f /etc/sysconfig/cluster ] && . /etc/sysconfig/cluster [ -f /etc/sysconfig/$DAEMON ] && . /etc/sysconfig/$DAEMON CLVMD_TIMEOUT="90" if [ -n "$OCF_RESKEY_CRM_meta_timeout" ]; then CLVMD_TIMEOUT=$(($OCF_RESKEY_CRM_meta_timeout/1000)) fi clvmd_usage() { cat </dev/null | grep -a "${binary}" > /dev/null 2>&1 if [ $? -eq 0 ];then # shortcut without requiring pgrep to search through all procs return $OCF_SUCCESS fi fi pid=$(pgrep ${binary}) case $? in 0) ocf_log info "PID file (pid:${pid} at $pidfile) created for ${binary}." echo "$pid" > $pidfile return $OCF_SUCCESS;; 1) rm -f "$pidfile" > /dev/null 2>&1 ocf_log info "$binary is not running" return $OCF_NOT_RUNNING;; *) rm -f "$pidfile" > /dev/null 2>&1 ocf_exit_reason "Error encountered detecting pid status of $binary" return $OCF_ERR_GENERIC;; esac } clvmd_status() { local rc local mirror_rc clvmd_validate if [ $? -ne $OCF_SUCCESS ]; then ocf_exit_reason "Unable to monitor, Environment validation failed." return $? fi check_process $DAEMON rc=$? mirror_rc=$rc if ocf_is_true $OCF_RESKEY_with_cmirrord; then check_process $CMIRROR mirror_rc=$? fi # If these ever don't match, return error to force recovery if [ $mirror_rc -ne $rc ]; then return $OCF_ERR_GENERIC fi return $rc } # NOTE: replace this with vgs, once display filter per attr is implemented. clustered_vgs() { ${LVM_VGDISPLAY} 2>/dev/null | awk 'BEGIN {RS="VG Name"} {if (/Clustered/) print $1;}' } wait_for_process() { local binary=$1 local timeout=$2 local count=0 ocf_log info "Waiting for $binary to exit" while [ $count -le $timeout ]; do check_process $binary if [ $? -eq $OCF_NOT_RUNNING ]; then ocf_log info "$binary terminated" return $OCF_SUCCESS fi sleep 1 count=$((count+1)) done return $OCF_ERR_GENERIC } time_left() { local end=$1 local default=$2 local now=$SECONDS local result=0 result=$(( $end - $now )) if [ $result -lt $default ]; then return $default fi return $result } clvmd_stop() { local LVM_VGS local rc=$OCF_SUCCESS local end=$(( $SECONDS + $CLVMD_TIMEOUT )) clvmd_status if [ $? -eq $OCF_NOT_RUNNING ]; then return $OCF_SUCCESS fi check_process $DAEMON if [ $? -ne $OCF_NOT_RUNNING ]; then LVM_VGS="$(clustered_vgs)" if [ -n "$LVM_VGS" ]; then ocf_log info "Deactivating clustered VG(s):" ocf_run ${LVM_VGCHANGE} -anl $LVM_VGS if [ $? -ne 0 ]; then ocf_exit_reason "Failed to deactivate volume groups, cluster vglist = $LVM_VGS" return $OCF_ERR_GENERIC fi fi ocf_log info "Signaling $DAEMON to exit" killall -TERM $DAEMON if [ $? != 0 ]; then ocf_exit_reason "Failed to signal -TERM to $DAEMON" return $OCF_ERR_GENERIC fi wait_for_process $DAEMON $CLVMD_TIMEOUT rc=$? if [ $rc -ne $OCF_SUCCESS ]; then ocf_exit_reason "$DAEMON failed to exit" return $rc fi rm -f $LOCK_FILE fi check_process $CMIRROR if [ $? -ne $OCF_NOT_RUNNING ] && ocf_is_true $OCF_RESKEY_with_cmirrord; then local timeout ocf_log info "Signaling $CMIRROR to exit" killall -INT $CMIRROR time_left $end 10; timeout=$? wait_for_process $CMIRROR $timeout rc=$? if [ $rc -ne $OCF_SUCCESS ]; then killall -KILL $CMIRROR time_left $end 10; timeout=$? wait_for_process $CMIRROR $(time_left $end 10) rc=$? fi fi return $rc } start_process() { local binary_path=$1 local opts=$2 check_process "$(basename $binary_path)" if [ $? -ne $OCF_SUCCESS ]; then ocf_log info "Starting $binary_path: " ocf_run $binary_path $opts rc=$? if [ $rc -ne 0 ]; then ocf_exit_reason "Failed to launch $binary_path, exit code $rc" exit $OCF_ERR_GENERIC fi fi return $OCF_SUCCESS } clvmd_activate_all() { if ! ocf_is_true "$OCF_RESKEY_activate_vgs"; then ocf_log info "skipping vg activation, activate_vgs is set to $OCF_RESKEY_activate_vgs" return $OCF_SUCCESS fi # Activate all volume groups by leaving the # "volume group name" parameter empty ocf_run ${LVM_VGCHANGE} -aay if [ $? -ne 0 ]; then ocf_log info "Failed to activate VG(s):" clvmd_stop return $OCF_ERR_GENERIC fi return $OCF_SUCCESS } clvmd_start() { local rc=0 local CLVMDOPTS="-T${CLVMD_TIMEOUT} $OCF_RESKEY_daemon_options" clvmd_validate if [ $? -ne $OCF_SUCCESS ]; then ocf_exit_reason "Unable to start, Environment validation failed." return $? fi + # systemd drop-in to stop process before storage services during + # shutdown/reboot + if ps -p 1 | grep -q systemd ; then + systemd_drop_in "99-clvmd" "After" "blk-availability.service" + fi + clvmd_status if [ $? -eq $OCF_SUCCESS ]; then ocf_log debug "$DAEMON already started" clvmd_activate_all return $?; fi # autoset locking type to clusted when lvmconf tool is available if [ -x "$LVMCONF" ]; then $LVMCONF --enable-cluster > /dev/null 2>&1 fi # if either of these fail, script will exit OCF_ERR_GENERIC if ocf_is_true $OCF_RESKEY_with_cmirrord; then start_process $CMIRROR_PATH fi start_process $DAEMON_PATH "$CLVMDOPTS" # Refresh local cache. # # It's possible that new PVs were added to this, or other VGs # while this node was down. So we run vgscan here to avoid # any potential "Missing UUID" messages with subsequent # LVM commands. # The following step would be better and more informative to the user: # 'action "Refreshing VG(s) local cache:" ${LVM_VGSCAN}' # but it could show warnings such as: # 'clvmd not running on node x-y-z Unable to obtain global lock.' # and the action would be shown as FAILED when in reality it didn't. # Ideally vgscan should have a startup mode that would not print # unnecessary warnings. ${LVM_VGSCAN} > /dev/null 2>&1 touch $LOCK_FILE clvmd_activate_all clvmd_status return $? } case $__OCF_ACTION in meta-data) meta_data exit $OCF_SUCCESS;; start) clvmd_start;; stop) clvmd_stop;; monitor) clvmd_status;; validate-all) clvmd_validate;; usage|help) clvmd_usage;; *) clvmd_usage exit $OCF_ERR_UNIMPLEMENTED;; esac rc=$? ocf_log debug "${OCF_RESOURCE_INSTANCE} $__OCF_ACTION : $rc" exit $rc diff --git a/heartbeat/ocf-shellfuncs.in b/heartbeat/ocf-shellfuncs.in index 87b2adf46..00aca9197 100644 --- a/heartbeat/ocf-shellfuncs.in +++ b/heartbeat/ocf-shellfuncs.in @@ -1,922 +1,938 @@ # # # Common helper functions for the OCF Resource Agents supplied by # heartbeat. # # Copyright (c) 2004 SUSE LINUX AG, Lars Marowsky-Brée # All Rights Reserved. # # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public # License as published by the Free Software Foundation; either # version 2.1 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with this library; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # # Build version: $Format:%H$ # TODO: Some of this should probably split out into a generic OCF # library for shell scripts, but for the time being, we'll just use it # ourselves... # # TODO wish-list: # - Generic function for evaluating version numbers # - Generic function(s) to extract stuff from our own meta-data # - Logging function which automatically adds resource identifier etc # prefixes # TODO: Move more common functionality for OCF RAs here. # # This was common throughout all legacy Heartbeat agents unset LC_ALL; export LC_ALL unset LANGUAGE; export LANGUAGE __SCRIPT_NAME=`basename $0` if [ -z "$OCF_ROOT" ]; then : ${OCF_ROOT=@OCF_ROOT_DIR@} fi if [ "$OCF_FUNCTIONS_DIR" = ${OCF_ROOT}/resource.d/heartbeat ]; then # old unset OCF_FUNCTIONS_DIR fi : ${OCF_FUNCTIONS_DIR:=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-binaries . ${OCF_FUNCTIONS_DIR}/ocf-returncodes . ${OCF_FUNCTIONS_DIR}/ocf-directories . ${OCF_FUNCTIONS_DIR}/ocf-rarun . ${OCF_FUNCTIONS_DIR}/ocf-distro # Define OCF_RESKEY_CRM_meta_interval in case it isn't already set, # to make sure that ocf_is_probe() always works : ${OCF_RESKEY_CRM_meta_interval=0} ocf_is_root() { if [ X`id -u` = X0 ]; then true else false fi } ocf_maybe_random() { local rnd="$RANDOM" # Something sane-ish in case a shell doesn't support $RANDOM [ -n "$rnd" ] || rnd=$$ echo $rnd } # Portability comments: # o The following rely on Bourne "sh" pattern-matching, which is usually # that for filename generation (note: not regexp). # o The "*) true ;;" clause is probably unnecessary, but is included # here for completeness. # o The negation in the pattern uses "!". This seems to be common # across many OSes (whereas the alternative "^" fails on some). # o If an OS is encountered where this negation fails, then a possible # alternative would be to replace the function contents by (e.g.): # [ -z "`echo $1 | tr -d '[0-9]'`" ] # ocf_is_decimal() { case "$1" in ""|*[!0-9]*) # empty, or at least one non-decimal false ;; *) true ;; esac } ocf_is_true() { case "$1" in yes|true|1|YES|TRUE|ja|on|ON) true ;; *) false ;; esac } ocf_is_hex() { case "$1" in ""|*[!0-9a-fA-F]*) # empty, or at least one non-hex false ;; *) true ;; esac } ocf_is_octal() { case "$1" in ""|*[!0-7]*) # empty, or at least one non-octal false ;; *) true ;; esac } __ocf_set_defaults() { __OCF_ACTION="$1" # Return to sanity for the agents... unset LANG LC_ALL=C export LC_ALL # TODO: Review whether we really should source this. Or rewrite # to match some emerging helper function syntax...? This imports # things which no OCF RA should be using... # Strip the OCF_RESKEY_ prefix from this particular parameter if [ -z "$OCF_RESKEY_OCF_CHECK_LEVEL" ]; then : ${OCF_CHECK_LEVEL:=0} else : ${OCF_CHECK_LEVEL:=$OCF_RESKEY_OCF_CHECK_LEVEL} fi if [ ! -d "$OCF_ROOT" ]; then ha_log "ERROR: OCF_ROOT points to non-directory $OCF_ROOT." exit $OCF_ERR_GENERIC fi if [ -z "$OCF_RESOURCE_TYPE" ]; then : ${OCF_RESOURCE_TYPE:=$__SCRIPT_NAME} fi if [ "x$__OCF_ACTION" = "xmeta-data" ]; then : ${OCF_RESOURCE_INSTANCE:="RESOURCE_ID"} fi if [ -z "$OCF_RA_VERSION_MAJOR" ]; then : We are being invoked as an init script. : Fill in some things with reasonable values. : ${OCF_RESOURCE_INSTANCE:="default"} return 0 fi if [ -z "$OCF_RESOURCE_INSTANCE" ]; then ha_log "ERROR: Need to tell us our resource instance name." exit $OCF_ERR_ARGS fi } hadate() { date "+${HA_DATEFMT}" } set_logtag() { if [ -z "$HA_LOGTAG" ]; then if [ -n "$OCF_RESOURCE_INSTANCE" ]; then HA_LOGTAG="$__SCRIPT_NAME($OCF_RESOURCE_INSTANCE)[$$]" else HA_LOGTAG="$__SCRIPT_NAME[$$]" fi fi } __ha_log() { local ignore_stderr=false local loglevel [ "x$1" = "x--ignore-stderr" ] && ignore_stderr=true && shift [ none = "$HA_LOGFACILITY" ] && HA_LOGFACILITY="" # if we're connected to a tty, then output to stderr if tty >/dev/null; then if [ "x$HA_debug" = "x0" -a "x$loglevel" = xdebug ] ; then return 0 elif [ "$ignore_stderr" = "true" ]; then # something already printed this error to stderr, so ignore return 0 fi if [ "$HA_LOGTAG" ]; then echo "$HA_LOGTAG: $*" else echo "$*" fi >&2 return 0 fi set_logtag if [ "x${HA_LOGD}" = "xyes" ] ; then ha_logger -t "${HA_LOGTAG}" "$@" if [ "$?" -eq "0" ] ; then return 0 fi fi if [ -n "$HA_LOGFACILITY" ] then : logging through syslog # loglevel is unknown, use 'notice' for now loglevel=notice case "${*}" in *ERROR*) loglevel=err;; *WARN*) loglevel=warning;; *INFO*|info) loglevel=info;; esac logger -t "$HA_LOGTAG" -p ${HA_LOGFACILITY}.${loglevel} "${*}" fi if [ -n "$HA_LOGFILE" ] then : appending to $HA_LOGFILE echo `hadate`" $HA_LOGTAG: ${*}" >> $HA_LOGFILE fi if [ -z "$HA_LOGFACILITY" -a -z "$HA_LOGFILE" ] && ! [ "$ignore_stderr" = "true" ] then : appending to stderr echo `hadate`"${*}" >&2 fi if [ -n "$HA_DEBUGLOG" ] then : appending to $HA_DEBUGLOG if [ "$HA_LOGFILE"x != "$HA_DEBUGLOG"x ]; then echo "$HA_LOGTAG: "`hadate`"${*}" >> $HA_DEBUGLOG fi fi } ha_log() { __ha_log "$@" } ha_debug() { if [ "x${HA_debug}" = "x0" ] ; then return 0 fi if tty >/dev/null; then if [ "$HA_LOGTAG" ]; then echo "$HA_LOGTAG: $*" else echo "$*" fi >&2 return 0 fi set_logtag if [ "x${HA_LOGD}" = "xyes" ] ; then ha_logger -t "${HA_LOGTAG}" -D "ha-debug" "$@" if [ "$?" -eq "0" ] ; then return 0 fi fi [ none = "$HA_LOGFACILITY" ] && HA_LOGFACILITY="" if [ -n "$HA_LOGFACILITY" ] then : logging through syslog logger -t "$HA_LOGTAG" -p "${HA_LOGFACILITY}.debug" "${*}" fi if [ -n "$HA_DEBUGLOG" ] then : appending to $HA_DEBUGLOG echo "$HA_LOGTAG: "`hadate`"${*}" >> $HA_DEBUGLOG fi if [ -z "$HA_LOGFACILITY" -a -z "$HA_DEBUGLOG" ] then : appending to stderr echo "$HA_LOGTAG: `hadate`${*}: ${HA_LOGFACILITY}" >&2 fi } ha_parameter() { local VALUE VALUE=`sed -e 's%[ ][ ]*% %' -e 's%^ %%' -e 's%#.*%%' $HA_CF | grep -i "^$1 " | sed 's%[^ ]* %%'` if [ "X$VALUE" = X ] then case $1 in keepalive) VALUE=2;; deadtime) ka=`ha_parameter keepalive` VALUE=`expr $ka '*' 2 '+' 1`;; esac fi echo $VALUE } ocf_log() { # TODO: Revisit and implement internally. if [ $# -lt 2 ] then ocf_log err "Not enough arguments [$#] to ocf_log." fi __OCF_PRIO="$1" shift __OCF_MSG="$*" case "${__OCF_PRIO}" in crit) __OCF_PRIO="CRIT";; err) __OCF_PRIO="ERROR";; warn) __OCF_PRIO="WARNING";; info) __OCF_PRIO="INFO";; debug)__OCF_PRIO="DEBUG";; *) __OCF_PRIO=`echo ${__OCF_PRIO}| tr '[a-z]' '[A-Z]'`;; esac if [ "${__OCF_PRIO}" = "DEBUG" ]; then ha_debug "${__OCF_PRIO}: $__OCF_MSG" else ha_log "${__OCF_PRIO}: $__OCF_MSG" fi } # # ocf_exit_reason: print exit error string to stderr # Usage: Allows the OCF script to provide a string # describing why the exit code was returned. # Arguments: reason - required, The string that represents why the error # occured. # ocf_exit_reason() { local cookie="$OCF_EXIT_REASON_PREFIX" local fmt local msg # No argument is likely not intentional. # Just one argument implies a printf format string of just "%s". # "Least surprise" in case some interpolated string from variable # expansion or other contains a percent sign. # More than one argument: first argument is going to be the format string. case $# in 0) ocf_log err "Not enough arguments to ocf_log_exit_msg." ;; 1) fmt="%s" ;; *) fmt=$1 shift case $fmt in *%*) : ;; # ok, does look like a format string *) ocf_log warn "Does not look like format string: [$fmt]" ;; esac ;; esac if [ -z "$cookie" ]; then # use a default prefix cookie="ocf-exit-reason:" fi msg=$(printf "${fmt}" "$@") printf >&2 "%s%s\n" "$cookie" "$msg" __ha_log --ignore-stderr "ERROR: $msg" } # # ocf_deprecated: Log a deprecation warning # Usage: ocf_deprecated [param-name] # Arguments: param-name optional, name of a boolean resource # parameter that can be used to suppress # the warning (default # "ignore_deprecation") ocf_deprecated() { local param param=${1:-ignore_deprecation} # don't use ${!param} here, it's a bashism if ! ocf_is_true $(eval echo \$OCF_RESKEY_$param); then ocf_log warn "This resource agent is deprecated" \ "and may be removed in a future release." \ "See the man page for details." \ "To suppress this warning, set the \"${param}\"" \ "resource parameter to true." fi } # # Ocf_run: Run a script, and log its output. # Usage: ocf_run [-q] [-info|-warn|-err] # -q: don't log the output of the command if it succeeds # -info|-warn|-err: log the output of the command at given # severity if it fails (defaults to err) # ocf_run() { local rc local output local verbose=1 local loglevel=err local var for var in 1 2 do case "$1" in "-q") verbose="" shift 1;; "-info"|"-warn"|"-err") loglevel=`echo $1 | sed -e s/-//g` shift 1;; *) ;; esac done output=`"$@" 2>&1` rc=$? output=`echo "$output" | tr -s ' \t\r\n' ' '` if [ $rc -eq 0 ]; then if [ "$verbose" -a ! -z "$output" ]; then ocf_log info "$output" fi return $OCF_SUCCESS else if [ ! -z "$output" ]; then ocf_log $loglevel "$output" else ocf_log $loglevel "command failed: $*" fi return $rc fi } ocf_pidfile_status() { local pid pidfile=$1 if [ ! -e $pidfile ]; then # Not exists return 2 fi pid=`cat $pidfile` kill -0 $pid 2>&1 > /dev/null if [ $? = 0 ]; then return 0 fi # Stale return 1 } ocf_take_lock() { local lockfile=$1 local rnd=$(ocf_maybe_random) sleep 0.$rnd while ocf_pidfile_status $lockfile do ocf_log info "Sleeping until $lockfile is released..." sleep 0.$rnd done echo $$ > $lockfile } ocf_release_lock_on_exit() { local lockfile=$1 trap "rm -f $lockfile" EXIT } # returns true if the CRM is currently running a probe. A probe is # defined as a monitor operation with a monitoring interval of zero. ocf_is_probe() { [ "$__OCF_ACTION" = "monitor" -a "$OCF_RESKEY_CRM_meta_interval" = 0 ] } # returns true if the resource is configured as a clone. This is # defined as a resource where the clone-max meta attribute is present, # and set to greater than zero. ocf_is_clone() { [ ! -z "${OCF_RESKEY_CRM_meta_clone_max}" ] && [ "${OCF_RESKEY_CRM_meta_clone_max}" -gt 0 ] } # returns true if the resource is configured as a multistate # (master/slave) resource. This is defined as a resource where the # master-max meta attribute is present, and set to greater than zero. ocf_is_ms() { [ ! -z "${OCF_RESKEY_CRM_meta_master_max}" ] && [ "${OCF_RESKEY_CRM_meta_master_max}" -gt 0 ] } # version check functions # allow . and - to delimit version numbers # max version number is 999 # letters and such are effectively ignored # ocf_is_ver() { echo $1 | grep '^[0-9][0-9.-]*[0-9]$' >/dev/null 2>&1 } ocf_ver2num() { echo $1 | awk -F'[.-]' ' {for(i=1; i<=NF; i++) s=s*1000+$i; print s} ' } ocf_ver_level(){ echo $1 | awk -F'[.-]' '{print NF}' } ocf_ver_complete_level(){ local ver="$1" local level="$2" local i=0 while [ $i -lt $level ]; do ver=${ver}.0 i=`expr $i + 1` done echo $ver } # usage: ocf_version_cmp VER1 VER2 # version strings can contain digits, dots, and dashes # must start and end with a digit # returns: # 0: VER1 smaller (older) than VER2 # 1: versions equal # 2: VER1 greater (newer) than VER2 # 3: bad format ocf_version_cmp() { ocf_is_ver "$1" || return 3 ocf_is_ver "$2" || return 3 local v1=$1 local v2=$2 local v1_level=`ocf_ver_level $v1` local v2_level=`ocf_ver_level $v2` local level_diff if [ $v1_level -lt $v2_level ]; then level_diff=`expr $v2_level - $v1_level` v1=`ocf_ver_complete_level $v1 $level_diff` elif [ $v1_level -gt $v2_level ]; then level_diff=`expr $v1_level - $v2_level` v2=`ocf_ver_complete_level $v2 $level_diff` fi v1=`ocf_ver2num $v1` v2=`ocf_ver2num $v2` if [ $v1 -eq $v2 ]; then return 1 elif [ $v1 -lt $v2 ]; then return 0 else return 2 # -1 would look funny in shell ;-) fi } ocf_local_nodename() { # use crm_node -n for pacemaker > 1.1.8 which pacemakerd > /dev/null 2>&1 if [ $? -eq 0 ]; then local version=$(pacemakerd -$ | grep "Pacemaker .*" | awk '{ print $2 }') version=$(echo $version | awk -F- '{ print $1 }') ocf_version_cmp "$version" "1.1.8" if [ $? -eq 2 ]; then which crm_node > /dev/null 2>&1 if [ $? -eq 0 ]; then crm_node -n return fi fi fi # otherwise use uname -n uname -n } # usage: dirname DIR dirname() { local a local b [ $# = 1 ] || return 1 a="$1" while [ 1 ]; do b="${a%/}" [ "$a" = "$b" ] && break a="$b" done b=${a%/*} [ -z "$b" -o "$a" = "$b" ] && b="." echo "$b" return 0 } +# usage: systemd_drop_in +systemd_drop_in() +{ + if [ $# -ne 3 ]; then + ocf_log err "Incorrect number of arguments [$#] for systemd_drop_in." + fi + + systemdrundir="/run/systemd/system/resource-agents-deps.target.d" + mkdir "$systemdrundir" + cat > "$systemdrundir/$1.conf" </dev/null # try to leave early, and yet leave processes time to exit sleep 0.2 for i in `seq $wait_time`; do kill -s 0 $pids 2>/dev/null || return 0 sleep 1 done done return 1 } # # create a given status directory # if the directory path doesn't start with $HA_VARRUN, then # we return with error (most of the calls would be with the user # supplied configuration, hence we need to do necessary # protection) # used mostly for PID files # # usage: ocf_mkstatedir owner permissions path # # owner: user.group # permissions: permissions # path: directory path # # example: # ocf_mkstatedir named 755 `dirname $pidfile` # ocf_mkstatedir() { local owner local perms local path owner=$1 perms=$2 path=$3 test -d $path && return 0 [ $(id -u) = 0 ] || return 1 case $path in ${HA_VARRUN%/}/*) : this path is ok ;; *) ocf_log err "cannot create $path (does not start with $HA_VARRUN)" return 1 ;; esac mkdir -p $path && chown $owner $path && chmod $perms $path } # # create a unique status directory in $HA_VARRUN # used mostly for PID files # the directory is by default set to # $HA_VARRUN/$OCF_RESOURCE_INSTANCE # the directory name is printed to stdout # # usage: ocf_unique_rundir owner permissions name # # owner: user.group (default: "root") # permissions: permissions (default: "755") # name: some unique string (default: "$OCF_RESOURCE_INSTANCE") # # to use the default either don't set the parameter or set it to # empty string ("") # example: # # STATEDIR=`ocf_unique_rundir named "" myownstatedir` # ocf_unique_rundir() { local path local owner local perms local name owner=${1:-"root"} perms=${2:-"755"} name=${3:-"$OCF_RESOURCE_INSTANCE"} path=$HA_VARRUN/$name if [ ! -d $path ]; then [ $(id -u) = 0 ] || return 1 mkdir -p $path && chown $owner $path && chmod $perms $path || return 1 fi echo $path } # # RA tracing may be turned on by setting OCF_TRACE_RA # the trace output will be saved to OCF_TRACE_FILE, if set, or # by default to # $HA_VARLIB/trace_ra//.. # e.g. $HA_VARLIB/trace_ra/oracle/db.start.2012-11-27.08:37:08 # # OCF_TRACE_FILE: # - FD (small integer [3-9]) in that case it is up to the callers # to capture output; the FD _must_ be open for writing # - absolute path # # NB: FD 9 may be used for tracing with bash >= v4 in case # OCF_TRACE_FILE is set to a path. # ocf_is_bash4() { echo "$SHELL" | grep bash > /dev/null && [ ${BASH_VERSINFO[0]} = "4" ] } ocf_trace_redirect_to_file() { local dest=$1 if ocf_is_bash4; then exec 9>$dest BASH_XTRACEFD=9 else exec 2>$dest fi } ocf_trace_redirect_to_fd() { local fd=$1 if ocf_is_bash4; then BASH_XTRACEFD=$fd else exec 2>&$fd fi } __ocf_test_trc_dest() { local dest=$1 if ! touch $dest; then ocf_log warn "$dest not writable, trace not going to happen" __OCF_TRC_DEST="" __OCF_TRC_MANAGE="" return 1 fi return 0 } ocf_default_trace_dest() { tty >/dev/null && return if [ -n "$OCF_RESOURCE_TYPE" -a \ -n "$OCF_RESOURCE_INSTANCE" -a -n "$__OCF_ACTION" ]; then local ts=`date +%F.%T` __OCF_TRC_DEST=$HA_VARLIB/trace_ra/${OCF_RESOURCE_TYPE}/${OCF_RESOURCE_INSTANCE}.${__OCF_ACTION}.$ts __OCF_TRC_MANAGE="1" fi } ocf_start_trace() { export __OCF_TRC_DEST="" __OCF_TRC_MANAGE="" case "$OCF_TRACE_FILE" in [3-9]) ocf_trace_redirect_to_fd "$OCF_TRACE_FILE" ;; /*/*) __OCF_TRC_DEST=$OCF_TRACE_FILE ;; "") ocf_default_trace_dest ;; *) ocf_log warn "OCF_TRACE_FILE must be set to either FD (open for writing) or absolute file path" ocf_default_trace_dest ;; esac if [ "$__OCF_TRC_DEST" ]; then mkdir -p `dirname $__OCF_TRC_DEST` __ocf_test_trc_dest $__OCF_TRC_DEST || return ocf_trace_redirect_to_file "$__OCF_TRC_DEST" fi if [ -n "$BASH_VERSION" ]; then PS4='+ `date +"%T"`: ${FUNCNAME[0]:+${FUNCNAME[0]}:}${LINENO}: ' fi set -x env=$( echo; printenv | sort ) } ocf_stop_trace() { set +x } __ocf_set_defaults "$@" : ${OCF_TRACE_RA:=$OCF_RESKEY_trace_ra} ocf_is_true "$OCF_TRACE_RA" && ocf_start_trace # pacemaker sets HA_use_logd, some others use HA_LOGD :/ if ocf_is_true "$HA_use_logd"; then : ${HA_LOGD:=yes} fi diff --git a/resource-agents.spec.in b/resource-agents.spec.in index d87364dbc..78021f1db 100644 --- a/resource-agents.spec.in +++ b/resource-agents.spec.in @@ -1,352 +1,356 @@ # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # %global rcver @rcver@ %global alphatag @alphatag@ %global numcomm @numcomm@ %global dirty @dirty@ # # Since this spec file supports multiple distributions, ensure we # use the correct group for each. # # SSLeay (required by ldirectord) %if 0%{?suse_version} %global SSLeay perl-Net_SSLeay %else %global SSLeay perl-Net-SSLeay %endif # determine the ras-set to process based on configure invokation %bcond_@rgmanager@ rgmanager %bcond_@linux-ha@ linuxha # build with HA_BIN compatibility for the existing Heartbeat stack %bcond_@compat-habindir@ compat_habindir %if %{with compat_habindir} %global _libexecdir %{_libdir} %endif Name: resource-agents Summary: Open Source HA Reusable Cluster Resource Scripts Version: @version@ Release: @specver@%{?rcver:%{rcver}}%{?numcomm:.%{numcomm}}%{?alphatag:.%{alphatag}}%{?dirty:.%{dirty}}%{?dist} License: GPLv2+ and LGPLv2+ URL: https://github.com/ClusterLabs/resource-agents %if 0%{?fedora} || 0%{?centos_version} || 0%{?rhel} Group: System Environment/Base %else Group: Productivity/Clustering/HA %endif Source0: %{name}-%{version}%{?rcver:%{rcver}}%{?numcomm:.%{numcomm}}%{?alphatag:-%{alphatag}}%{?dirty:-%{dirty}}.tar.bz2 Obsoletes: heartbeat-resources <= %{version} Provides: heartbeat-resources = %{version} ## Setup/build bits BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) # Build dependencies BuildRequires: automake autoconf pkgconfig BuildRequires: perl python-devel BuildRequires: libxslt glib2-devel BuildRequires: which %if 0%{?fedora} || 0%{?centos_version} || 0%{?rhel} BuildRequires: cluster-glue-libs-devel BuildRequires: docbook-style-xsl docbook-dtds %if 0%{?rhel} == 0 BuildRequires: libnet-devel %endif %endif %if 0%{?suse_version} %if 0%{?suse_version} >= 1140 BuildRequires: libnet1 %else BuildRequires: libnet %endif BuildRequires: libglue-devel BuildRequires: libxslt docbook_4 docbook-xsl-stylesheets %endif ## Runtime deps # system tools shared by several agents Requires: /bin/bash /bin/grep /bin/sed /bin/gawk Requires: /bin/ps /usr/bin/pkill /bin/hostname /bin/netstat Requires: /sbin/fuser /bin/mount # Filesystem / fs.sh / netfs.sh Requires: /sbin/fsck Requires: /sbin/fsck.ext2 /sbin/fsck.ext3 /sbin/fsck.ext4 Requires: /sbin/fsck.xfs Requires: /sbin/mount.nfs /sbin/mount.nfs4 /sbin/mount.cifs # IPaddr2 Requires: /sbin/ip # LVM / lvm.sh Requires: /sbin/lvm # nfsserver / netfs.sh Requires: /usr/sbin/rpc.nfsd /sbin/rpc.statd /usr/sbin/rpc.mountd # rgmanager %if %{with rgmanager} # ip.sh Requires: /usr/sbin/ethtool Requires: /sbin/rdisc /usr/sbin/arping /bin/ping /bin/ping6 #nfsexport.sh Requires: /sbin/findfs Requires: /sbin/quotaon /sbin/quotacheck %endif %description A set of scripts to interface with several services to operate in a High Availability environment for both Pacemaker and rgmanager service managers. %if %{with linuxha} %package -n ldirectord License: GPLv2+ Summary: A Monitoring Daemon for Maintaining High Availability Resources %if 0%{?fedora} || 0%{?centos_version} || 0%{?rhel} Group: System Environment/Daemons %else Group: Productivity/Clustering/HA %endif Obsoletes: heartbeat-ldirectord <= %{version} Provides: heartbeat-ldirectord = %{version} %if 0%{?fedora} > 18 || 0%{?centos_version} > 6 || 0%{?rhel} > 6 BuildRequires: perl-podlators %endif Requires: %{SSLeay} perl-libwww-perl perl-MailTools Requires: ipvsadm logrotate %if 0%{?fedora_version} Requires: perl-Net-IMAP-Simple-SSL Requires(post): /sbin/chkconfig Requires(preun):/sbin/chkconfig %endif %if %{defined systemd_requires} BuildRequires: systemd %{?systemd_requires} %endif %description -n ldirectord The Linux Director Daemon (ldirectord) was written by Jacob Rief. ldirectord is a stand alone daemon for monitoring the services on real servers. Currently, HTTP, HTTPS, and FTP services are supported. ldirectord is simple to install and works with Pacemaker (http://clusterlabs.org/). See 'ldirectord -h' and linux-ha/doc/ldirectord for more information. %endif %prep %if 0%{?suse_version} == 0 && 0%{?fedora} == 0 && 0%{?centos_version} == 0 && 0%{?rhel} == 0 %{error:Unable to determine the distribution/version. This is generally caused by missing /etc/rpm/macros.dist. Please install the correct build packages or define the required macros manually.} exit 1 %endif %setup -q -n %{name}-%{version}%{?rcver:%{rcver}}%{?numcomm:.%{numcomm}}%{?alphatag:-%{alphatag}}%{?dirty:-%{dirty}} %build if [ ! -f configure ]; then ./autogen.sh fi %if 0%{?fedora} >= 11 || 0%{?centos_version} > 5 || 0%{?rhel} > 5 CFLAGS="$(echo '%{optflags}')" %global conf_opt_fatal "--enable-fatal-warnings=no" %else CFLAGS="${CFLAGS} ${RPM_OPT_FLAGS}" %global conf_opt_fatal "--enable-fatal-warnings=yes" %endif %if %{with rgmanager} %global rasset rgmanager %endif %if %{with linuxha} %global rasset linux-ha %endif %if %{with rgmanager} && %{with linuxha} %global rasset all %endif export CFLAGS %configure \ %{?conf_opt_rsctmpdir:%conf_opt_rsctmpdir} \ %{conf_opt_fatal} \ %if %{defined _unitdir} --with-systemdsystemunitdir=%{_unitdir} \ %endif --with-pkg-name=%{name} \ --with-ras-set=%{rasset} %if %{defined jobs} JFLAGS="$(echo '-j%{jobs}')" %else JFLAGS="$(echo '%{_smp_mflags}')" %endif make $JFLAGS %install rm -rf %{buildroot} make install DESTDIR=%{buildroot} ## tree fixup # remove docs (there is only one and they should come from doc sections in files) rm -rf %{buildroot}/usr/share/doc/resource-agents %if %{with linuxha} %if 0%{?suse_version} test -d %{buildroot}/sbin || mkdir %{buildroot}/sbin ( cd %{buildroot}/sbin %if %{defined _unitdir} ln -s /usr/sbin/service rcldirectord %else ln -sf /%{_sysconfdir}/init.d/ldirectord rcldirectord %endif ) || true %endif %endif %clean rm -rf %{buildroot} %files %defattr(-,root,root) %doc AUTHORS COPYING COPYING.GPLv3 COPYING.LGPL ChangeLog %if %{with linuxha} %doc doc/README.webapps %doc %{_datadir}/%{name}/ra-api-1.dtd %doc %{_datadir}/%{name}/metadata.rng %endif %if %{with rgmanager} %{_datadir}/cluster %{_sbindir}/rhev-check.sh %endif %if %{with linuxha} %dir /usr/lib/ocf %dir /usr/lib/ocf/resource.d %dir /usr/lib/ocf/lib /usr/lib/ocf/lib/heartbeat /usr/lib/ocf/resource.d/heartbeat %if %{with rgmanager} /usr/lib/ocf/resource.d/redhat %endif +%if %{defined _unitdir} +%{_unitdir}/resource-agents-deps.target +%endif + %dir %{_datadir}/%{name} %dir %{_datadir}/%{name}/ocft %{_datadir}/%{name}/ocft/configs %{_datadir}/%{name}/ocft/caselib %{_datadir}/%{name}/ocft/helpers.sh %{_datadir}/%{name}/ocft/runocft %{_datadir}/%{name}/ocft/runocft.prereq %{_datadir}/%{name}/ocft/README %{_datadir}/%{name}/ocft/README.zh_CN %{_sbindir}/ocf-tester %{_sbindir}/ocft %{_sbindir}/sfex_init %{_sbindir}/sfex_stat %{_includedir}/heartbeat %dir %attr (1755, root, root) %{_var}/run/resource-agents %{_mandir}/man7/*.7* %{_mandir}/man8/ocf-tester.8* %{_mandir}/man8/sfex_init.8* # For compatability with pre-existing agents %dir %{_sysconfdir}/ha.d %{_sysconfdir}/ha.d/shellfuncs %{_libexecdir}/heartbeat %post -n resource-agents if [ $1 = 2 ]; then if [ -d %{_var}/run/heartbeat/rsctmp ]; then cp -fpr %{_var}/run/heartbeat/rsctmp/* %{_var}/run/resource-agents/ 1>/dev/null 2>&1 rm -fr %{_var}/run/heartbeat/rsctmp fi fi %if %{with rgmanager} ccs_update_schema > /dev/null 2>&1 ||: %endif %if 0%{?suse_version} %preun -n ldirectord %if %{defined _unitdir} %service_del_preun ldirectord.service %else %stop_on_removal ldirectord %endif %postun -n ldirectord %if %{defined _unitdir} %service_del_postun ldirectord.service %else %insserv_cleanup %endif %post -n ldirectord %if %{defined _unitdir} %service_add_post ldirectord.service %endif %pre -n ldirectord %if %{defined _unitdir} %service_add_pre ldirectord.service %endif %endif %if 0%{?fedora} %preun -n ldirectord /sbin/chkconfig --del ldirectord %postun -n ldirectord -p /sbin/ldconfig %post -n ldirectord /sbin/chkconfig --add ldirectord %endif %files -n ldirectord %defattr(-,root,root) %{_sbindir}/ldirectord %doc ldirectord/ldirectord.cf COPYING %{_mandir}/man8/ldirectord.8* %config(noreplace) %{_sysconfdir}/logrotate.d/ldirectord %dir %{_sysconfdir}/ha.d %dir %{_sysconfdir}/ha.d/resource.d %{_sysconfdir}/ha.d/resource.d/ldirectord %if %{defined _unitdir} %{_unitdir}/ldirectord.service %exclude %{_sysconfdir}/init.d/ldirectord %else %{_sysconfdir}/init.d/ldirectord %endif %if 0%{?suse_version} /sbin/rcldirectord %endif %if 0%{?fedora} /usr/lib/ocf/resource.d/heartbeat/ldirectord %endif %endif %changelog * @date@ Autotools generated version - @version@-@specver@-@numcomm@.@alphatag@.@dirty@ - Autotools generated version diff --git a/systemd/Makefile.am b/systemd/Makefile.am new file mode 100644 index 000000000..fe13de28a --- /dev/null +++ b/systemd/Makefile.am @@ -0,0 +1,23 @@ +# +# Copyright (C) 2017 Oyvind Albrigtsen +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# + +MAINTAINERCLEANFILES = Makefile.in + +if HAVE_SYSTEMD +dist_systemdsystemunit_DATA = resource-agents-deps.target +endif diff --git a/systemd/resource-agents-deps.target b/systemd/resource-agents-deps.target new file mode 100644 index 000000000..1c4fdffe8 --- /dev/null +++ b/systemd/resource-agents-deps.target @@ -0,0 +1,2 @@ +[Unit] +Description=resource-agents dependencies