diff --git a/heartbeat/asterisk b/heartbeat/asterisk index 381f891b4..5c90935dc 100755 --- a/heartbeat/asterisk +++ b/heartbeat/asterisk @@ -1,497 +1,497 @@ #!/bin/sh # # # Asterisk # # Description: Manages an Asterisk PBX as an HA resource # # Authors: Martin Gerhard Loschwitz # Florian Haas # # Support: users@clusterlabs.org # License: GNU General Public License (GPL) # # (c) 2011 hastexo Professional Services GmbH # # This resource agent is losely derived from the MySQL resource # agent, which itself is made available to the public under the # following copyright: # # (c) 2002-2005 International Business Machines, Inc. # 2005-2010 Linux-HA contributors # # See usage() function below for more details ... # # OCF instance parameters: # OCF_RESKEY_binary # OCF_RESKEY_canary_binary # OCF_RESKEY_config # OCF_RESKEY_user # OCF_RESKEY_group # OCF_RESKEY_additional_parameters # OCF_RESKEY_realtime # OCF_RESKEY_maxfiles ####################################################################### # Initialization: : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} . ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs ####################################################################### # Fill in some defaults if no values are specified HOSTOS=`uname` if [ "X${HOSTOS}" = "XOpenBSD" ]; then OCF_RESKEY_user_default="_asterisk" OCF_RESKEY_group_default="_asterisk" else OCF_RESKEY_user_default="asterisk" OCF_RESKEY_group_default="asterisk" fi OCF_RESKEY_binary_default="asterisk" OCF_RESKEY_canary_binary_default="astcanary" OCF_RESKEY_config_default="/etc/asterisk/asterisk.conf" OCF_RESKEY_additional_parameters_default="-g -vvv" OCF_RESKEY_realtime_default="false" OCF_RESKEY_maxfiles_default="8192" : ${OCF_RESKEY_binary=${OCF_RESKEY_binary_default}} : ${OCF_RESKEY_canary_binary=${OCF_RESKEY_canary_binary_default}} : ${OCF_RESKEY_config=${OCF_RESKEY_config_default}} : ${OCF_RESKEY_user=${OCF_RESKEY_user_default}} : ${OCF_RESKEY_group=${OCF_RESKEY_group_default}} : ${OCF_RESKEY_additional_parameters=${OCF_RESKEY_additional_parameters_default}} : ${OCF_RESKEY_realtime=${OCF_RESKEY_realtime_default}} : ${OCF_RESKEY_maxfiles=${OCF_RESKEY_maxfiles_default}} ####################################################################### usage() { cat < 1.0 Resource agent for the Asterisk PBX. May manage an Asterisk PBX telephony system or a clone set that forms an Asterisk distributed device setup. Manages an Asterisk PBX Location of the Asterisk PBX server binary Asterisk PBX server binary Location of the Asterisk PBX Canary server binary Asterisk PBX Canary server binary The Asterisk PBX configuration file Asterisk PBX config User running Asterisk PBX daemon Asterisk PBX user Group running Asterisk PBX daemon (for logfile and directory permissions) Asterisk PBX group Additional parameters which are passed to the Asterisk PBX on startup (e.g. -L <load> or -M <value>). Additional parameters to pass to the Asterisk PBX Determines whether the Asterisk PBX daemon will be run with realtime priority or not. Asterisk PBX realtime priority Determines how many files the Asterisk PBX is allowed to open at a time. Helps to fix the 'Too many open files' error message. Asterisk PBX allowed MAXFILES A SIP URI to check when monitoring. During monitor, the agent will attempt to do a SIP OPTIONS request against this URI. Requires the sipsak utility to be present and executable. If unset, the agent does no SIP URI monitoring. SIP URI to check when monitoring END } ####################################################################### # Convenience functions asterisk_rx() { # if $HOME is set, asterisk -rx writes a .asterisk_history there ( unset HOME ocf_run $OCF_RESKEY_binary -r -s $ASTRUNDIR/asterisk.ctl -x "$1" ) } ####################################################################### # Functions invoked by resource manager actions asterisk_validate() { local rc check_binary $OCF_RESKEY_binary check_binary pgrep if [ -n "$OCF_RESKEY_monitor_sipuri" ]; then check_binary sipsak fi # A config file on shared storage that is not available # during probes is OK. if [ ! -f $OCF_RESKEY_config ]; then if ! ocf_is_probe; then ocf_log err "Config $OCF_RESKEY_config doesn't exist" return $OCF_ERR_INSTALLED fi ocf_log warn "Config $OCF_RESKEY_config not available during a probe" fi getent passwd $OCF_RESKEY_user >/dev/null 2>&1 rc=$? if [ $rc -ne 0 ]; then ocf_log err "User $OCF_RESKEY_user doesn't exist" return $OCF_ERR_INSTALLED fi getent group $OCF_RESKEY_group >/dev/null 2>&1 rc=$? if [ $rc -ne 0 ]; then ocf_log err "Group $OCF_RESKEY_group doesn't exist" return $OCF_ERR_INSTALLED fi true } asterisk_status() { local pid local rc if [ ! -f $ASTRUNDIR/asterisk.pid ]; then ocf_log info "Asterisk PBX is not running" return $OCF_NOT_RUNNING fi pid=`cat $ASTRUNDIR/asterisk.pid` ocf_run kill -s 0 $pid rc=$? if [ $rc -eq 0 ]; then if ocf_is_true "$OCF_RESKEY_realtime"; then astcanary_pid=`pgrep -d " " -f "astcanary $ASTRUNDIR/alt.asterisk.canary.tweet.tweet.tweet"` if [ ! "$astcanary_pid" ]; then ocf_log err "Asterisk PBX is running but astcanary is not although it should" return $OCF_ERR_GENERIC fi else return $OCF_SUCCESS fi else ocf_log info "Asterisk PBX not running: removing old PID file" rm -f $ASTRUNDIR/asterisk.pid return $OCF_NOT_RUNNING fi } asterisk_monitor() { local rc asterisk_status rc=$? # If status returned an error, return that immediately if [ $rc -ne $OCF_SUCCESS ]; then return $rc fi # Check whether connecting to asterisk is possible asterisk_rx 'core show channels count' rc=$? if [ $rc -ne 0 ]; then if [ "$__OCF_ACTION" = "start" ]; then ocf_log info "Asterisk PBX not running yet" return $OCF_NOT_RUNNING; else ocf_log err "Failed to connect to the Asterisk PBX" return $OCF_ERR_GENERIC; fi fi # Optionally check the monitor URI with sipsak # The return values: # 0 means that a 200 was received. # 1 means something else then 1xx or 2xx was received. # 2 will be returned on local errors like non resolvable names # or wrong options combination. # 3 will be returned on remote errors like socket errors # (e.g. icmp error), redirects without a contact header or # simply no answer (timeout). # This can also happen if sipsak is run too early after asterisk # start. #To avoid the case where the sipsak check runs before the sip starts at the start action - SIPCHECK=`sipsak -s $OCF_RESKEY_monitor_sipuri` + SIPCHECK="sipsak -s $OCF_RESKEY_monitor_sipuri" if [ -n "$OCF_RESKEY_monitor_sipuri" ]; then ocf_run $SIPCHECK rc=$? if [ "$__OCF_ACTION" = "start" ]; then while [ $rc -ne 0 ]; do ocf_log info "Starting ast, waiting for SIP ok" sleep 1 ocf_run $SIPCHECK rc=$? done else case "$rc" in 1|2) return $OCF_ERR_GENERIC;; 3) return $OCF_NOT_RUNNING;; esac fi fi ocf_log debug "Asterisk PBX monitor succeeded" return $OCF_SUCCESS } asterisk_start() { local asterisk_extra_params local dir local rc asterisk_status rc=$? if [ $rc -eq $OCF_SUCCESS ]; then ocf_log info "Asterisk PBX already running" return $OCF_SUCCESS fi # If Asterisk is not already running, make sure there is no # old astcanary instance when the new asterisk starts. To # achieve this, kill old astcanary instances belonging to # this $ASTRUNDIR. # Find out PIDs of running astcanaries astcanary_pid=`pgrep -d " " -f "astcanary $ASTRUNDIR/alt.asterisk.canary.tweet.tweet.tweet"` # If there are astcanaries running that belong to $ASTRUNDIR, # kill them. if [ "$astcanary_pid" ]; then for i in $astcanary_pid; do ocf_run kill -s KILL $astcanary_pid; done fi for dir in $ASTRUNDIR $ASTLOGDIR $ASTLOGDIR/cdr-csv $ASTLOGDIR/cdr-custom; do if [ ! -d "$dir" ]; then ocf_run install -d -o $OCF_RESKEY_user -g $OCF_RESKEY_group $dir \ || exit $OCF_ERR_GENERIC fi # Regardless of whether we just created the directory or it # already existed, check whether it is writable by the configured # user if ! su -s /bin/sh - $OCF_RESKEY_user -c "test -w $dir"; then ocf_log warn "Directory $dir is not writable by $OCF_RESKEY_user, attempting chown" ocf_run chown $OCF_RESKEY_user:$OCF_RESKEY_group $dir \ || exit $OCF_ERR_PERM fi done # set MAXFILES ulimit -n $OCF_RESKEY_maxfiles # Determine whether Asterisk PBX is supposed to run in Realtime mode # or not and make asterisk daemonize automatically if ocf_is_true "$OCF_RESKEY_realtime"; then asterisk_extra_params="-F -p" else asterisk_extra_params="-F" fi ocf_run ${OCF_RESKEY_binary} -G $OCF_RESKEY_group -U $OCF_RESKEY_user \ -C $OCF_RESKEY_config \ $OCF_RESKEY_additional_parameters \ $asterisk_extra_params rc=$? if [ $rc -ne 0 ]; then ocf_log err "Asterisk PBX start command failed: $rc" exit $OCF_ERR_GENERIC fi # Spin waiting for the server to come up. # Let the CRM/LRM time us out if required while true; do asterisk_monitor rc=$? [ $rc -eq $OCF_SUCCESS ] && break if [ $rc -ne $OCF_NOT_RUNNING ]; then ocf_log err "Asterisk PBX start failed" exit $OCF_ERR_GENERIC fi sleep 2 done ocf_log info "Asterisk PBX started" return $OCF_SUCCESS } asterisk_stop() { local pid local astcanary_pid local rc asterisk_status rc=$? if [ $rc -eq $OCF_NOT_RUNNING ]; then ocf_log info "Asterisk PBX already stopped" return $OCF_SUCCESS fi pid=`cat $ASTRUNDIR/asterisk.pid` ocf_run kill -s TERM $pid rc=$? if [ $rc -ne 0 ]; then ocf_log err "Asterisk PBX couldn't be stopped" exit $OCF_ERR_GENERIC fi # stop waiting shutdown_timeout=15 if [ -n "$OCF_RESKEY_CRM_meta_timeout" ]; then shutdown_timeout=$((($OCF_RESKEY_CRM_meta_timeout/1000)-5)) fi count=0 while [ $count -lt $shutdown_timeout ]; do asterisk_status rc=$? if [ $rc -eq $OCF_NOT_RUNNING ]; then break fi count=`expr $count + 1` sleep 1 ocf_log debug "Asterisk PBX still hasn't stopped yet. Waiting ..." done asterisk_status rc=$? if [ $rc -ne $OCF_NOT_RUNNING ]; then # SIGTERM didn't help either, try SIGKILL ocf_log info "Asterisk PBX failed to stop after ${shutdown_timeout}s using SIGTERM. Trying SIGKILL ..." ocf_run kill -s KILL $pid fi # After killing asterisk, stop astcanary if ocf_is_true "$OCF_RESKEY_realtime"; then astcanary_pid=`pgrep -d " " -f "astcanary $ASTRUNDIR/alt.asterisk.canary.tweet.tweet.tweet"` if [ "$astcanary_pid" ]; then for i in $astcanary_pid; do ocf_run kill -s KILL $astcanary_pid; done fi fi ocf_log info "Asterisk PBX stopped" return $OCF_SUCCESS } ####################################################################### case "$1" in meta-data) meta_data exit $OCF_SUCCESS;; usage|help) usage exit $OCF_SUCCESS;; esac # Anything except meta-data and help must pass validation asterisk_validate || exit $? # Now that validate has passed and we can be sure to be able to read # the config file, set convenience variables ASTRUNDIR=`grep astrundir $OCF_RESKEY_config | awk '/^astrundir/ {print $3}'` ASTLOGDIR=`grep astlogdir $OCF_RESKEY_config | awk '/^astlogdir/ {print $3}'` # What kind of method was invoked? case "$1" in start) asterisk_start;; stop) asterisk_stop;; status) asterisk_status;; monitor) asterisk_monitor;; validate-all) ;; *) usage exit $OCF_ERR_UNIMPLEMENTED;; esac