diff --git a/tests/regressions.sh b/tests/regressions.sh
new file mode 100755
index 0000000..b74278d
--- /dev/null
+++ b/tests/regressions.sh
@@ -0,0 +1,174 @@
+#!/bin/bash
+#
+# Copyright (C) 2013 Lars Marowsky-Bree <lmb@suse.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This software is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+
+# TODO:
+# - More tests
+# - Handle optional, long-running tests better
+# - Support for explicitly running a single test
+# - Verify output from commands
+#   - Normalize uuids and device names so they are diffable
+#   - Log to file, instead of syslog is needed
+# - How to test watch mode?
+# - Can the unit/service file be tested? or at least the wrapper?
+
+sbd_setup() {
+	trap sbd_teardown EXIT
+	for N in $(seq 3) ; do
+		F[$N]=$(mktemp /tmp/sbd.device.$N.XXXXXX)
+		dd if=/dev/zero of=${F[$N]} count=2048
+		L[$N]=$(losetup -f)
+		losetup ${L[$N]} ${F[$N]}
+		D[$N]="/dev/mapper/sbd_$N"
+		dmsetup create sbd_$N --table "0 2048 linear ${L[$N]} 0"
+	done
+}
+
+sbd_teardown() {
+	for N in $(seq 3) ; do
+		dmsetup remove sbd_$N
+		losetup -d ${L[$N]}
+		rm -f ${F[$N]}
+	done
+}
+
+sbd_dev_fail() {
+	dmsetup wipe_table sbd_$1
+}
+
+sbd_dev_resume() {
+	dmsetup suspend sbd_$1
+	dmsetup load sbd_$1 --table "0 2048 linear ${L[$1]} 0"
+	dmsetup resume sbd_$1
+}
+
+_ok() {
+	echo -- $@
+	$@
+	rc=$?
+	if [ $rc -ne 0 ]; then
+		echo "$@ failed with $rc"
+		exit
+	fi
+}
+
+_no() {
+	echo -- $@
+	$@
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		echo "$@ did NOT fail ($rc)"
+		exit
+	fi
+	return 0
+}
+
+test_1() {
+	echo "Creating three devices"
+	_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} create
+	_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} dump
+}
+
+test_2() {
+	echo "Basic functionality"
+	for S in `seq 2` ; do
+		_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} allocate "test-$S"
+	done
+	_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} -n test-1 message test-2 reset
+	_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} list
+}
+
+test_3() {
+	echo "Start mode (expected not to start, because reset was written in test_2)"
+	_no sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} -n test-2 -Z -Z -Z -S 1 watch
+}
+
+test_4() {
+	echo "Deliver message with 1 failure"
+	sbd_dev_fail 1
+	_no sbd -d ${D[1]} -n test-1 message test-2 exit
+	_no sbd -d ${D[1]} -d ${D[2]} -n test-1 message test-2 exit
+	_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} -n test-1 message test-2 exit
+	sbd_dev_resume 1
+
+}
+
+test_5() {
+	echo "Deliver message with 2 failures"
+	sbd_dev_fail 1
+	sbd_dev_fail 2
+	_no sbd -d ${D[1]} -d ${D[2]} -n test-1 message test-2 exit
+	_no sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} -n test-1 message test-2 exit
+	sbd_dev_resume 1
+	sbd_dev_resume 2
+
+}
+
+test_6() {
+	echo "Deliver message with 3 failures"
+	sbd_dev_fail 1
+	sbd_dev_fail 2
+	sbd_dev_fail 3
+	_no sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} -n test-1 message test-2 exit
+	sbd_dev_resume 1
+	sbd_dev_resume 2
+	sbd_dev_resume 3
+}
+
+test_101() {
+	echo "Creating one device"
+	_ok sbd -d ${D[1]} create
+}
+
+test_102() {
+	echo "Creating two devices"
+	_ok sbd -d ${D[1]} -d ${D[2]} create
+}
+
+test_7() {
+	echo "Allocate all slots plus 1"
+	_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} -2 0 create
+	for S in `seq 255` ; do
+		_ok sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} allocate "test-$S"
+	done
+	_no sbd -d ${D[1]} -d ${D[2]} -d ${D[3]} allocate "test-256"
+}
+
+test_8() {
+	echo "Non-existent device path"
+	_no sbd -d /dev/kfdifdifdfdlfd -create 2>/dev/null
+}
+
+test_9() {
+	echo "Basic sbd invocation"
+	_no sbd
+	_ok sbd -h
+}
+
+sbd_setup
+
+for T in $(seq 9); do
+	if ! test_$T ; then
+		echo "FAILURE: Test $T"
+		break
+	fi
+	echo "SUCCESS: Test $T"
+done
+
+echo "SUCCESS: All tests completed"
+