Change Details

== Introduction == Hawk (HA Web Konsole) is a web-based GUI for managing and monitoring Pacemaker HA clusters. It is generally intended to be run on every node in the cluster, so that you can just point your web browser at any node to access it, for example: `https://your-server:7630/` Hawk requires users to log in prior to providing access to the cluster. The same rules apply as for the python GUI; you need to log in as a user in the `haclient` group. The easiest thing to do is assign a password to the `hacluster` user, then log in using that account. Note that you will need to configure this user account on every node you want to use Hawk on. Once logged in, you will see a screen showing the current state of the cluster. Three views are possible (summary, tree and table), selectable with the buttons on the top right of the screen. The navigation bar down the left hand side provides access to the history explorer, setup wizard, cluster properties, resource and constraints configuration. The little tools menu next to the logout link gives you the simulator, cluster diagram and hb_report generation. Management operations (start, stop, online, standby, etc.) can be performed by clicking the little menu icon to the right of any node or resource on the status screen. More detailed usage documentation (including assorted screenshots) is available in the [[http://www.suse.com/documentation/sle_ha/book_sleha/?page=/documentation/sle_ha/book_sleha/data/cha_ha_configuration_hawk.html|SUSE Linux Enterprise High Availability Extension documentation]] == Notable Features == * View cluster status (summary and detailed views). * Examine potential failure scenarios via simulator mode. * History explorer for analysis of cluster behaviour and prior failures. * Perform regular management tasks (start, stop, move resources, put nodes on standby/maintenance, etc.) * Configure resources, constraints, general cluster properties. * Setup wizard for common configurations (currently web server and OCFS2 filesystem). == Getting Hawk == Hawk is included in the [[https://www.suse.com/products/highavailability/|SUSE Linux Enterprise High Availability Extension]], and has also been included with [[https://www.opensuse.org/en/|openSUSE]] since openSUSE 11.4. Hawk should generally work with Pacemaker 1.1, but please note that Hawk 0.6.x has only been extensively tested with Pacemaker >= 1.1.8. Some error codes and clone instance handling changed with that version of Pacemaker, so as a rule, for Pacemaker >= 1.1.8, you want Hawk 0.6.x, and for Pacemaker < 1.1.8, you want Hawk 0.5.x. Recent stable packages for openSUSE 12.2, 12.3 and Tumbleweed can be found in the [[https://build.opensuse.org/project/show/network:ha-clustering:Stable|network:ha-clustering:Stable]] [[http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/|repo]] on OBS. There is also a Fedora 18 build there. Note that hawk depends on the [[http://crmsh.nongnu.org/|crm shell]] and some functions (notably the history explorer) currently require `hb_report` from cluster-glue. Builds for both the crm shell and cluster-glue can be found in the above repository. == Hacking Hawk == The source is on GitHub at https://github.com/ClusterLabs/hawk - please check the README file for useful information. == Questions, Feedback, etc. == Please direct comments, feedback, questions, etc. to the appropriate [[Mailing lists|mailing list(s)]] and/or [mailto:tserong@suse.com Tim Serong] (IRC nick is "tserong").

== Introduction == Hawk (HA Web Konsole) is a web-based GUI for managing and monitoring Pacemaker HA clusters. It is generally intended to be run on every node in the cluster, so that you can just point your web browser at any node to access it, for example: `https://your-server:7630/` Hawk requires users to log in prior to providing access to the cluster. The same rules apply as for the python GUI; you need to log in as a user in the `haclient` group. The easiest thing to do is assign a password to the `hacluster` user, then log in using that account. Note that you will need to configure this user account on every node you want to use Hawk on. Once logged in, you will see a screen showing the current state of the cluster. Three views are possible (summary, tree and table), selectable with the buttons on the top right of the screen. The navigation bar down the left hand side provides access to the history explorer, setup wizard, cluster properties, resource and constraints configuration. The little tools menu next to the logout link gives you the simulator, cluster diagram and hb_report generation. Management operations (start, stop, online, standby, etc.) can be performed by clicking the little menu icon to the right of any node or resource on the status screen. More detailed usage documentation (including assorted screenshots) is available in the [[http://www.suse.com/documentation/sle_ha/book_sleha/?page=/documentation/sle_ha/book_sleha/data/cha_ha_configuration_hawk.html|SUSE Linux Enterprise High Availability Extension documentation]] == Notable Features == * View cluster status (summary and detailed views). * Examine potential failure scenarios via simulator mode. * History explorer for analysis of cluster behaviour and prior failures. * Perform regular management tasks (start, stop, move resources, put nodes on standby/maintenance, etc.) * Configure resources, constraints, general cluster properties. * Setup wizard for common configurations (currently web server and OCFS2 filesystem). == Getting Hawk == Hawk is included in the [[https://www.suse.com/products/highavailability/|SUSE Linux Enterprise High Availability Extension]], and has also been included with [[https://www.opensuse.org/en/|openSUSE]] since openSUSE 11.4. Hawk should generally work with Pacemaker 1.1, but please note that Hawk 0.6.x has only been extensively tested with Pacemaker >= 1.1.8. Some error codes and clone instance handling changed with that version of Pacemaker, so as a rule, for Pacemaker >= 1.1.8, you want Hawk 0.6.x, and for Pacemaker < 1.1.8, you want Hawk 0.5.x. Recent stable packages for openSUSE 12.2, 12.3 and Tumbleweed can be found in the [[https://build.opensuse.org/project/show/network:ha-clustering:Stable|network:ha-clustering:Stable]] [[http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/|repo]] on OBS. There is also a Fedora 18 build there. Note that hawk depends on the [[http://crmsh.nongnu.org/|crm shell]] and some functions (notably the history explorer) currently require `hb_report` from cluster-glue. Builds for both the crm shell and cluster-glue can be found in the above repository. == Hacking Hawk == The source is on GitHub at https://github.com/ClusterLabs/hawk - please check the README file for useful information. == Questions, Feedback, etc. == Please direct comments, feedback, questions, etc., to one of the [[ clusterlabs/clusterlabs_mailing_lists/ ]] and/or [[mailto:tserong@suse.com | Tim Serong]] (IRC nick is `tserong`).

== Introduction == Hawk (HA Web Konsole) is a web-based GUI for managing and monitoring Pacemaker HA clusters. It is generally intended to be run on every node in the cluster, so that you can just point your web browser at any node to access it, for example: `https://your-server:7630/` Hawk requires users to log in prior to providing access to the cluster. The same rules apply as for the python GUI; you need to log in as a user in the `haclient` group. The easiest thing to do is assign a password to the `hacluster` user, then log in using that account. Note that you will need to configure this user account on every node you want to use Hawk on. Once logged in, you will see a screen showing the current state of the cluster. Three views are possible (summary, tree and table), selectable with the buttons on the top right of the screen. The navigation bar down the left hand side provides access to the history explorer, setup wizard, cluster properties, resource and constraints configuration. The little tools menu next to the logout link gives you the simulator, cluster diagram and hb_report generation. Management operations (start, stop, online, standby, etc.) can be performed by clicking the little menu icon to the right of any node or resource on the status screen. More detailed usage documentation (including assorted screenshots) is available in the [[http://www.suse.com/documentation/sle_ha/book_sleha/?page=/documentation/sle_ha/book_sleha/data/cha_ha_configuration_hawk.html|SUSE Linux Enterprise High Availability Extension documentation]] == Notable Features == * View cluster status (summary and detailed views). * Examine potential failure scenarios via simulator mode. * History explorer for analysis of cluster behaviour and prior failures. * Perform regular management tasks (start, stop, move resources, put nodes on standby/maintenance, etc.) * Configure resources, constraints, general cluster properties. * Setup wizard for common configurations (currently web server and OCFS2 filesystem). == Getting Hawk == Hawk is included in the [[https://www.suse.com/products/highavailability/|SUSE Linux Enterprise High Availability Extension]], and has also been included with [[https://www.opensuse.org/en/|openSUSE]] since openSUSE 11.4. Hawk should generally work with Pacemaker 1.1, but please note that Hawk 0.6.x has only been extensively tested with Pacemaker >= 1.1.8. Some error codes and clone instance handling changed with that version of Pacemaker, so as a rule, for Pacemaker >= 1.1.8, you want Hawk 0.6.x, and for Pacemaker < 1.1.8, you want Hawk 0.5.x. Recent stable packages for openSUSE 12.2, 12.3 and Tumbleweed can be found in the [[https://build.opensuse.org/project/show/network:ha-clustering:Stable|network:ha-clustering:Stable]] [[http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/|repo]] on OBS. There is also a Fedora 18 build there. Note that hawk depends on the [[http://crmsh.nongnu.org/|crm shell]] and some functions (notably the history explorer) currently require `hb_report` from cluster-glue. Builds for both the crm shell and cluster-glue can be found in the above repository. == Hacking Hawk == The source is on GitHub at https://github.com/ClusterLabs/hawk - please check the README file for useful information. == Questions, Feedback, etc. == Please direct comments, feedback, questions, etc., to the appropriate [[Mailing lists|to one of the [[ clusterlabs/clusterlabs_mailing _list(s)]]s/ ]] and/or [[mailto:tserong@suse.com | Tim Serong]] (IRC nick is "`tserong"`).