Page MenuHomeClusterLabs Projects
Files F3153549

fence_brocade.xml
No OneTemporary
Actions

fence_brocade.xml
View Options

<?xml version="1.0" ?>
<resource-agent name="fence_brocade" shortdesc="Fence agent for HP Brocade over telnet/ssh" >
<longdesc>fence_brocade is an I/O Fencing agent which can be used with Brocade FC switches. It logs into a Brocade switch via telnet and disables a specified port. Disabling the port which a machine is connected to effectively fences that machine. Lengthy telnet connections to the switch should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions. After a fence operation has taken place the fenced machine can no longer connect to the Brocade FC switch. When the fenced machine is ready to be brought back into the GFS cluster (after reboot) the port on the Brocade FC switch needs to be enabled. This can be done by running fence_brocade and specifying the enable action</longdesc>
<vendor-url>http://www.brocade.com</vendor-url>
<parameters>
<parameter name="action" unique="0" required="1">
<getopt mixed="-o, --action=[action]" />
<content type="string" default="off" />
<shortdesc lang="en">Fencing action</shortdesc>
</parameter>
<parameter name="cmd_prompt" unique="0" required="0" deprecated="1">
<getopt mixed="-c, --command-prompt=[prompt]" />
<content type="string" default="[&apos;&gt; &apos;]" />
<shortdesc lang="en">Force Python regex for command prompt</shortdesc>
</parameter>
<parameter name="command_prompt" unique="0" required="0" obsoletes="cmd_prompt">
<getopt mixed="-c, --command-prompt=[prompt]" />
<content type="string" default="[&apos;&gt; &apos;]" />
<shortdesc lang="en">Force Python regex for command prompt</shortdesc>
</parameter>
<parameter name="identity_file" unique="0" required="0">
<getopt mixed="-k, --identity-file=[filename]" />
<shortdesc lang="en">Identity file (private key) for SSH</shortdesc>
</parameter>
<parameter name="inet4_only" unique="0" required="0">
<getopt mixed="-4, --inet4-only" />
<content type="boolean" />
<shortdesc lang="en">Forces agent to use IPv4 addresses only</shortdesc>
</parameter>
<parameter name="inet6_only" unique="0" required="0">
<getopt mixed="-6, --inet6-only" />
<content type="boolean" />
<shortdesc lang="en">Forces agent to use IPv6 addresses only</shortdesc>
</parameter>
<parameter name="ip" unique="0" required="1" obsoletes="ipaddr">
<getopt mixed="-a, --ip=[ip]" />
<content type="string" />
<shortdesc lang="en">IP address or hostname of fencing device</shortdesc>
</parameter>
<parameter name="ipaddr" unique="0" required="1" deprecated="1">
<getopt mixed="-a, --ip=[ip]" />
<content type="string" />
<shortdesc lang="en">IP address or hostname of fencing device</shortdesc>
</parameter>
<parameter name="ipport" unique="0" required="0">
<getopt mixed="-u, --ipport=[port]" />
<content type="integer" default="23" />
<shortdesc lang="en">TCP/UDP port to use for connection with device</shortdesc>
</parameter>
<parameter name="login" unique="0" required="1" deprecated="1">
<getopt mixed="-l, --username=[name]" />
<content type="string" />
<shortdesc lang="en">Login name</shortdesc>
</parameter>
<parameter name="passwd" unique="0" required="0" deprecated="1">
<getopt mixed="-p, --password=[password]" />
<content type="string" />
<shortdesc lang="en">Login password or passphrase</shortdesc>
</parameter>
<parameter name="passwd_script" unique="0" required="0" deprecated="1">
<getopt mixed="-S, --password-script=[script]" />
<content type="string" />
<shortdesc lang="en">Script to run to retrieve password</shortdesc>
</parameter>
<parameter name="password" unique="0" required="0" obsoletes="passwd">
<getopt mixed="-p, --password=[password]" />
<content type="string" />
<shortdesc lang="en">Login password or passphrase</shortdesc>
</parameter>
<parameter name="password_script" unique="0" required="0" obsoletes="passwd_script">
<getopt mixed="-S, --password-script=[script]" />
<content type="string" />
<shortdesc lang="en">Script to run to retrieve password</shortdesc>
</parameter>
<parameter name="plug" unique="0" required="1" obsoletes="port">
<getopt mixed="-n, --plug=[id]" />
<content type="string" />
<shortdesc lang="en">Physical plug number on device, UUID or identification of machine</shortdesc>
</parameter>
<parameter name="port" unique="0" required="1" deprecated="1">
<getopt mixed="-n, --plug=[id]" />
<content type="string" />
<shortdesc lang="en">Physical plug number on device, UUID or identification of machine</shortdesc>
</parameter>
<parameter name="secure" unique="0" required="0" deprecated="1">
<getopt mixed="-x, --ssh" />
<content type="boolean" />
<shortdesc lang="en">Use SSH connection</shortdesc>
</parameter>
<parameter name="ssh" unique="0" required="0" obsoletes="secure">
<getopt mixed="-x, --ssh" />
<content type="boolean" />
<shortdesc lang="en">Use SSH connection</shortdesc>
</parameter>
<parameter name="ssh_options" unique="0" required="0">
<getopt mixed="--ssh-options=[options]" />
<content type="string" />
<shortdesc lang="en">SSH options to use</shortdesc>
</parameter>
<parameter name="username" unique="0" required="1" obsoletes="login">
<getopt mixed="-l, --username=[name]" />
<content type="string" />
<shortdesc lang="en">Login name</shortdesc>
</parameter>
<parameter name="quiet" unique="0" required="0">
<getopt mixed="-q, --quiet" />
<content type="boolean" />
<shortdesc lang="en">Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.</shortdesc>
</parameter>
<parameter name="verbose" unique="0" required="0">
<getopt mixed="-v, --verbose" />
<content type="boolean" />
<shortdesc lang="en">Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.</shortdesc>
</parameter>
<parameter name="verbose_level" unique="0" required="0">
<getopt mixed="--verbose-level" />
<content type="integer" />
<shortdesc lang="en">Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).</shortdesc>
</parameter>
<parameter name="debug" unique="0" required="0" deprecated="1">
<getopt mixed="-D, --debug-file=[debugfile]" />
<content type="string" />
<shortdesc lang="en">Write debug information to given file</shortdesc>
</parameter>
<parameter name="debug_file" unique="0" required="0" obsoletes="debug">
<getopt mixed="-D, --debug-file=[debugfile]" />
<shortdesc lang="en">Write debug information to given file</shortdesc>
</parameter>
<parameter name="version" unique="0" required="0">
<getopt mixed="-V, --version" />
<content type="boolean" />
<shortdesc lang="en">Display version information and exit</shortdesc>
</parameter>
<parameter name="help" unique="0" required="0">
<getopt mixed="-h, --help" />
<content type="boolean" />
<shortdesc lang="en">Display help and exit</shortdesc>
</parameter>
<parameter name="plug_separator" unique="0" required="0">
<getopt mixed="--plug-separator=[char]" />
<content type="string" default="," />
<shortdesc lang="en">Separator for plug parameter when specifying more than 1 plug</shortdesc>
</parameter>
<parameter name="separator" unique="0" required="0">
<getopt mixed="-C, --separator=[char]" />
<content type="string" default="," />
<shortdesc lang="en">Separator for CSV created by 'list' operation</shortdesc>
</parameter>
<parameter name="delay" unique="0" required="0">
<getopt mixed="--delay=[seconds]" />
<content type="second" default="0" />
<shortdesc lang="en">Wait X seconds before fencing is started</shortdesc>
</parameter>
<parameter name="disable_timeout" unique="0" required="0">
<getopt mixed="--disable-timeout=[true/false]" />
<content type="string" />
<shortdesc lang="en">Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)</shortdesc>
</parameter>
<parameter name="login_timeout" unique="0" required="0">
<getopt mixed="--login-timeout=[seconds]" />
<content type="second" default="5" />
<shortdesc lang="en">Wait X seconds for cmd prompt after login</shortdesc>
</parameter>
<parameter name="power_timeout" unique="0" required="0">
<getopt mixed="--power-timeout=[seconds]" />
<content type="second" default="20" />
<shortdesc lang="en">Test X seconds for status change after ON/OFF</shortdesc>
</parameter>
<parameter name="power_wait" unique="0" required="0">
<getopt mixed="--power-wait=[seconds]" />
<content type="second" default="0" />
<shortdesc lang="en">Wait X seconds after issuing ON/OFF</shortdesc>
</parameter>
<parameter name="shell_timeout" unique="0" required="0">
<getopt mixed="--shell-timeout=[seconds]" />
<content type="second" default="3" />
<shortdesc lang="en">Wait X seconds for cmd prompt after issuing command</shortdesc>
</parameter>
<parameter name="stonith_status_sleep" unique="0" required="0">
<getopt mixed="--stonith-status-sleep=[seconds]" />
<content type="second" default="1" />
<shortdesc lang="en">Sleep X seconds between status calls during a STONITH action</shortdesc>
</parameter>
<parameter name="retry_on" unique="0" required="0">
<getopt mixed="--retry-on=[attempts]" />
<content type="integer" default="1" />
<shortdesc lang="en">Count of attempts to retry power on</shortdesc>
</parameter>
<parameter name="ssh_path" unique="0" required="0">
<getopt mixed="--ssh-path=[path]" />
<shortdesc lang="en">Path to ssh binary</shortdesc>
</parameter>
<parameter name="telnet_path" unique="0" required="0">
<getopt mixed="--telnet-path=[path]" />
<shortdesc lang="en">Path to telnet binary</shortdesc>
</parameter>
</parameters>
<actions>
<action name="on" automatic="1"/>
<action name="off" />
<action name="status" />
<action name="list" />
<action name="list-status" />
<action name="monitor" />
<action name="metadata" />
<action name="manpage" />
<action name="validate-all" />
</actions>
</resource-agent>

File Metadata

Mime Type
text/xml
Expires
Tue, Feb 25, 9:37 PM (1 d, 2 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1464983
Default Alt Text
fence_brocade.xml (9 KB)

Event Timeline